2 * File: drivers/video/omap/lcd_sx1.c
4 * LCD panel support for the Siemens SX1 mobile phone
6 * Current version : Vovan888 at gmail com, great help from FCA00000
8 * This program is free software; you can redistribute it and/or modify it
9 * under the terms of the GNU General Public License as published by the
10 * Free Software Foundation; either version 2 of the License, or (at your
11 * option) any later version.
13 * This program is distributed in the hope that it will be useful, but
14 * WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
16 * General Public License for more details.
18 * You should have received a copy of the GNU General Public License along
19 * with this program; if not, write to the Free Software Foundation, Inc.,
20 * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
23 #include <linux/module.h>
24 #include <linux/platform_device.h>
25 #include <linux/delay.h>
27 #include <asm/arch/gpio.h>
28 #include <asm/arch/omapfb.h>
29 #include <asm/arch/mcbsp.h>
30 #include <asm/arch/mux.h>
33 * OMAP310 GPIO registers
35 #define GPIO_DATA_INPUT 0xfffce000
36 #define GPIO_DATA_OUTPUT 0xfffce004
37 #define GPIO_DIR_CONTROL 0xfffce008
38 #define GPIO_INT_CONTROL 0xfffce00c
39 #define GPIO_INT_MASK 0xfffce010
40 #define GPIO_INT_STATUS 0xfffce014
41 #define GPIO_PIN_CONTROL 0xfffce018
44 #define A_LCD_SSC_RD 3
45 #define A_LCD_SSC_SD 7
46 #define _A_LCD_RESET 9
47 #define _A_LCD_SSC_CS 12
48 #define _A_LCD_SSC_A0 13
50 #define DSP_REG 0xE1017024
52 const unsigned char INIT_1[12] = {
53 0x1C, 0x02, 0x88, 0x00, 0x1E, 0xE0, 0x00, 0xDC, 0x00, 0x02, 0x00
56 const unsigned char INIT_2[127] = {
57 0x15, 0x00, 0x29, 0x00, 0x3E, 0x00, 0x51, 0x00, 0x65, 0x00, 0x7A, 0x00, 0x8D, 0x00, 0xA1, 0x00,
58 0xB6, 0x00, 0xC7, 0x00, 0xD8, 0x00, 0xEB, 0x00, 0xFB, 0x00, 0x0B, 0x01, 0x1B, 0x01, 0x27, 0x01,
59 0x34, 0x01, 0x41, 0x01, 0x4C, 0x01, 0x55, 0x01, 0x5F, 0x01, 0x68, 0x01, 0x70, 0x01, 0x78, 0x01,
60 0x7E, 0x01, 0x86, 0x01, 0x8C, 0x01, 0x94, 0x01, 0x9B, 0x01, 0xA1, 0x01, 0xA4, 0x01, 0xA9, 0x01,
61 0xAD, 0x01, 0xB2, 0x01, 0xB7, 0x01, 0xBC, 0x01, 0xC0, 0x01, 0xC4, 0x01, 0xC8, 0x01, 0xCB, 0x01,
62 0xCF, 0x01, 0xD2, 0x01, 0xD5, 0x01, 0xD8, 0x01, 0xDB, 0x01, 0xE0, 0x01, 0xE3, 0x01, 0xE6, 0x01,
63 0xE8, 0x01, 0xEB, 0x01, 0xEE, 0x01, 0xF1, 0x01, 0xF3, 0x01, 0xF8, 0x01, 0xF9, 0x01, 0xFC, 0x01,
64 0x00, 0x02, 0x03, 0x02, 0x07, 0x02, 0x09, 0x02, 0x0E, 0x02, 0x13, 0x02, 0x1C, 0x02, 0x00
67 const unsigned char INIT_3[15] = {
68 0x14, 0x26, 0x33, 0x3D, 0x45, 0x4D, 0x53, 0x59,
69 0x5E, 0x63, 0x67, 0x6D, 0x71, 0x78, 0xFF
72 static void epson_sendbyte(int flag, unsigned char byte)
74 int i, shifter = 0x80;
77 omap_set_gpio_dataout(_A_LCD_SSC_A0, 0);
79 omap_set_gpio_dataout(A_LCD_SSC_RD, 1);
81 omap_set_gpio_dataout(A_LCD_SSC_SD, flag);
83 OMAP_MCBSP_WRITE(OMAP1510_MCBSP3_BASE, PCR0, 0x2200);
84 OMAP_MCBSP_WRITE(OMAP1510_MCBSP3_BASE, PCR0, 0x2202);
85 for (i = 0; i < 8; i++) {
86 OMAP_MCBSP_WRITE(OMAP1510_MCBSP3_BASE, PCR0, 0x2200);
87 omap_set_gpio_dataout(A_LCD_SSC_SD, shifter & byte);
88 OMAP_MCBSP_WRITE(OMAP1510_MCBSP3_BASE, PCR0, 0x2202);
91 omap_set_gpio_dataout(_A_LCD_SSC_A0, 1);
94 static void init_system(void)
96 omap_mcbsp_request(OMAP_MCBSP3);
97 omap_mcbsp_stop(OMAP_MCBSP3);
100 static void setup_GPIO(void)
103 omap_request_gpio(A_LCD_SSC_RD);
104 omap_request_gpio(A_LCD_SSC_SD);
105 omap_request_gpio(_A_LCD_RESET);
106 omap_request_gpio(_A_LCD_SSC_CS);
107 omap_request_gpio(_A_LCD_SSC_A0);
109 /* set all GPIOs to output */
110 omap_set_gpio_direction(A_LCD_SSC_RD, 0);
111 omap_set_gpio_direction(A_LCD_SSC_SD, 0);
112 omap_set_gpio_direction(_A_LCD_RESET, 0);
113 omap_set_gpio_direction(_A_LCD_SSC_CS, 0);
114 omap_set_gpio_direction(_A_LCD_SSC_A0, 0);
117 omap_set_gpio_dataout(A_LCD_SSC_RD, 1);
118 omap_set_gpio_dataout(A_LCD_SSC_SD, 0);
119 omap_set_gpio_dataout(_A_LCD_RESET, 0);
120 omap_set_gpio_dataout(_A_LCD_SSC_CS, 1);
121 omap_set_gpio_dataout(_A_LCD_SSC_A0, 1);
124 static void display_init(void)
128 omap_cfg_reg(MCBSP3_CLKX);
135 omap_set_gpio_dataout(A_LCD_SSC_SD, 1);
136 epson_sendbyte(0, 0x25);
138 omap_set_gpio_dataout(_A_LCD_RESET, 0);
140 omap_set_gpio_dataout(_A_LCD_RESET, 1);
142 omap_set_gpio_dataout(_A_LCD_SSC_CS, 1);
144 omap_set_gpio_dataout(_A_LCD_SSC_CS, 0);
146 /* init LCD, phase 1 */
147 epson_sendbyte(0, 0xCA);
148 for (i = 0; i < 10; i++)
149 epson_sendbyte(1, INIT_1[i]);
150 omap_set_gpio_dataout(_A_LCD_SSC_CS, 1);
151 omap_set_gpio_dataout(_A_LCD_SSC_CS, 0);
153 /* init LCD phase 2 */
154 epson_sendbyte(0, 0xCB);
155 for( i = 0; i < 125; i++)
156 epson_sendbyte(1, INIT_2[i]);
157 omap_set_gpio_dataout(_A_LCD_SSC_CS, 1);
158 omap_set_gpio_dataout(_A_LCD_SSC_CS, 0);
160 /* init LCD phase 2a */
161 epson_sendbyte(0, 0xCC);
162 for( i = 0; i < 14; i++)
163 epson_sendbyte(1, INIT_3[i]);
164 omap_set_gpio_dataout(_A_LCD_SSC_CS, 1);
165 omap_set_gpio_dataout(_A_LCD_SSC_CS, 0);
167 /* init LCD phase 3 */
168 epson_sendbyte(0, 0xBC);
169 epson_sendbyte(1, 0x08);
170 omap_set_gpio_dataout(_A_LCD_SSC_CS, 1);
171 omap_set_gpio_dataout(_A_LCD_SSC_CS, 0);
173 /* init LCD phase 4 */
174 epson_sendbyte(0, 0x07);
175 epson_sendbyte(1, 0x05);
176 omap_set_gpio_dataout(_A_LCD_SSC_CS, 1);
177 omap_set_gpio_dataout(_A_LCD_SSC_CS, 0);
179 /* init LCD phase 5 */
180 epson_sendbyte(0, 0x94);
181 omap_set_gpio_dataout(_A_LCD_SSC_CS, 1);
182 omap_set_gpio_dataout(_A_LCD_SSC_CS, 0);
184 /* init LCD phase 6 */
185 epson_sendbyte(0, 0xC6);
186 epson_sendbyte(1, 0x80);
187 omap_set_gpio_dataout(_A_LCD_SSC_CS, 1);
188 mdelay(100); /* used to be 1000 */
189 omap_set_gpio_dataout(_A_LCD_SSC_CS, 0);
191 /* init LCD phase 7 */
192 epson_sendbyte(0, 0x16);
193 epson_sendbyte(1, 0x02);
194 epson_sendbyte(1, 0x00);
195 epson_sendbyte(1, 0xB1);
196 epson_sendbyte(1, 0x00);
197 omap_set_gpio_dataout(_A_LCD_SSC_CS, 1);
198 omap_set_gpio_dataout(_A_LCD_SSC_CS, 0);
200 /* init LCD phase 8 */
201 epson_sendbyte(0, 0x76);
202 epson_sendbyte(1, 0x00);
203 epson_sendbyte(1, 0x00);
204 epson_sendbyte(1, 0xDB);
205 epson_sendbyte(1, 0x00);
206 omap_set_gpio_dataout(_A_LCD_SSC_CS, 1);
207 omap_set_gpio_dataout(_A_LCD_SSC_CS, 0);
209 /* init LCD phase 9 */
210 epson_sendbyte(0, 0xAF);
211 omap_set_gpio_dataout(_A_LCD_SSC_CS, 1);
214 static int sx1_panel_init(struct lcd_panel *panel, struct omapfb_device *fbdev)
219 static void sx1_panel_cleanup(struct lcd_panel *panel)
223 static void sx1_panel_disable(struct lcd_panel *panel)
225 printk(KERN_INFO "SX1: LCD panel disable\n");
227 omap_set_gpio_dataout(_A_LCD_SSC_CS, 1);
229 epson_sendbyte(0, 0x25);
230 omap_set_gpio_dataout(_A_LCD_SSC_CS, 0);
232 epson_sendbyte(0, 0xAE);
233 omap_set_gpio_dataout(_A_LCD_SSC_CS, 1);
235 omap_set_gpio_dataout(_A_LCD_SSC_CS, 0);
237 epson_sendbyte(0, 0x95);
238 omap_set_gpio_dataout(_A_LCD_SSC_CS, 1);
241 static int sx1_panel_enable(struct lcd_panel *panel)
244 sx1_panel_disable(); /* try to disable panel first, if we boot from Symbian */
247 printk(KERN_INFO "lcd_sx1: LCD panel enable\n");
252 sx1_setbacklight(0x18);
253 sx1_setkeylight (0x06);
258 static unsigned long sx1_panel_get_caps(struct lcd_panel *panel)
263 struct lcd_panel sx1_panel = {
265 .config = OMAP_LCDC_PANEL_TFT | OMAP_LCDC_INV_VSYNC |
266 OMAP_LCDC_INV_HSYNC | OMAP_LCDC_INV_PIX_CLOCK |
267 OMAP_LCDC_INV_OUTPUT_EN,
281 .init = sx1_panel_init,
282 .cleanup = sx1_panel_cleanup,
283 .enable = sx1_panel_enable,
284 .disable = sx1_panel_disable,
285 .get_caps = sx1_panel_get_caps,
288 static int sx1_panel_probe(struct platform_device *pdev)
290 omapfb_register_panel(&sx1_panel);
294 static int sx1_panel_remove(struct platform_device *pdev)
299 static int sx1_panel_suspend(struct platform_device *pdev, pm_message_t mesg)
304 static int sx1_panel_resume(struct platform_device *pdev)
309 struct platform_driver sx1_panel_driver = {
310 .probe = sx1_panel_probe,
311 .remove = sx1_panel_remove,
312 .suspend = sx1_panel_suspend,
313 .resume = sx1_panel_resume,
316 .owner = THIS_MODULE,
320 static int sx1_panel_drv_init(void)
322 return platform_driver_register(&sx1_panel_driver);
325 static void sx1_panel_drv_cleanup(void)
327 platform_driver_unregister(&sx1_panel_driver);
330 module_init(sx1_panel_drv_init);
331 module_exit(sx1_panel_drv_cleanup);