drivers/usb/host/uhci-hub.c

   1 /*
   2  * Universal Host Controller Interface driver for USB.
   3  *
   4  * Maintainer: Alan Stern <stern@rowland.harvard.edu>
   5  *
   6  * (C) Copyright 1999 Linus Torvalds
   7  * (C) Copyright 1999-2002 Johannes Erdfelt, johannes@erdfelt.com
   8  * (C) Copyright 1999 Randy Dunlap
   9  * (C) Copyright 1999 Georg Acher, acher@in.tum.de
  10  * (C) Copyright 1999 Deti Fliegl, deti@fliegl.de
  11  * (C) Copyright 1999 Thomas Sailer, sailer@ife.ee.ethz.ch
  12  * (C) Copyright 2004 Alan Stern, stern@rowland.harvard.edu
  13  */
  14
  15 static __u8 root_hub_hub_des[] =
  16 {
  17         0x09,                   /*  __u8  bLength; */
  18         0x29,                   /*  __u8  bDescriptorType; Hub-descriptor */
  19         0x02,                   /*  __u8  bNbrPorts; */
  20         0x0a,                   /* __u16  wHubCharacteristics; */
  21         0x00,                   /*   (per-port OC, no power switching) */
  22         0x01,                   /*  __u8  bPwrOn2pwrGood; 2ms */
  23         0x00,                   /*  __u8  bHubContrCurrent; 0 mA */
  24         0x00,                   /*  __u8  DeviceRemovable; *** 7 Ports max *** */
  25         0xff                    /*  __u8  PortPwrCtrlMask; *** 7 ports max *** */
  26 };
  27
  28 #define UHCI_RH_MAXCHILD        7
  29
  30 /* must write as zeroes */
  31 #define WZ_BITS         (USBPORTSC_RES2 | USBPORTSC_RES3 | USBPORTSC_RES4)
  32
  33 /* status change bits:  nonzero writes will clear */
  34 #define RWC_BITS        (USBPORTSC_OCC | USBPORTSC_PEC | USBPORTSC_CSC)
  35
  36 /* A port that either is connected or has a changed-bit set will prevent
  37  * us from AUTO_STOPPING.
  38  */
  39 static int any_ports_active(struct uhci_hcd *uhci)
  40 {
  41         int port;
  42
  43         for (port = 0; port < uhci->rh_numports; ++port) {
  44                 if ((inw(uhci->io_addr + USBPORTSC1 + port * 2) &
  45                                 (USBPORTSC_CCS | RWC_BITS)) ||
  46                                 test_bit(port, &uhci->port_c_suspend))
  47                         return 1;
  48         }
  49         return 0;
  50 }
  51
  52 static inline int get_hub_status_data(struct uhci_hcd *uhci, char *buf)
  53 {
  54         int port;
  55
  56         *buf = 0;
  57         for (port = 0; port < uhci->rh_numports; ++port) {
  58                 if ((inw(uhci->io_addr + USBPORTSC1 + port * 2) & RWC_BITS) ||
  59                                 test_bit(port, &uhci->port_c_suspend))
  60                         *buf |= (1 << (port + 1));
  61         }
  62         return !!*buf;
  63 }
  64
  65 #define OK(x)                   len = (x); break
  66
  67 #define CLR_RH_PORTSTAT(x) \
  68         status = inw(port_addr); \
  69         status &= ~(RWC_BITS|WZ_BITS); \
  70         status &= ~(x); \
  71         status |= RWC_BITS & (x); \
  72         outw(status, port_addr)
  73
  74 #define SET_RH_PORTSTAT(x) \
  75         status = inw(port_addr); \
  76         status |= (x); \
  77         status &= ~(RWC_BITS|WZ_BITS); \
  78         outw(status, port_addr)
  79
  80 /* UHCI controllers don't automatically stop resume signalling after 20 msec,
  81  * so we have to poll and check timeouts in order to take care of it.
  82  */
  83 static void uhci_finish_suspend(struct uhci_hcd *uhci, int port,
  84                 unsigned long port_addr)
  85 {
  86         int status;
  87
  88         if (test_bit(port, &uhci->suspended_ports)) {
  89                 CLR_RH_PORTSTAT(USBPORTSC_SUSP | USBPORTSC_RD);
  90                 clear_bit(port, &uhci->suspended_ports);
  91                 clear_bit(port, &uhci->resuming_ports);
  92                 set_bit(port, &uhci->port_c_suspend);
  93
  94                 /* The controller won't actually turn off the RD bit until
  95                  * it has had a chance to send a low-speed EOP sequence,
  96                  * which takes 3 bit times (= 2 microseconds).  We'll delay
  97                  * slightly longer for good luck. */
  98                 udelay(4);
  99         }
 100 }
 101
 102 static void uhci_check_ports(struct uhci_hcd *uhci)
 103 {
 104         unsigned int port;
 105         unsigned long port_addr;
 106         int status;
 107
 108         for (port = 0; port < uhci->rh_numports; ++port) {
 109                 port_addr = uhci->io_addr + USBPORTSC1 + 2 * port;
 110                 status = inw(port_addr);
 111                 if (unlikely(status & USBPORTSC_PR)) {
 112                         if (time_after_eq(jiffies, uhci->ports_timeout)) {
 113                                 CLR_RH_PORTSTAT(USBPORTSC_PR);
 114                                 udelay(10);
 115
 116                                 /* If the port was enabled before, turning
 117                                  * reset on caused a port enable change.
 118                                  * Turning reset off causes a port connect
 119                                  * status change.  Clear these changes. */
 120                                 CLR_RH_PORTSTAT(USBPORTSC_CSC | USBPORTSC_PEC);
 121                                 SET_RH_PORTSTAT(USBPORTSC_PE);
 122                         }
 123                 }
 124                 if (unlikely(status & USBPORTSC_RD)) {
 125                         if (!test_bit(port, &uhci->resuming_ports)) {
 126
 127                                 /* Port received a wakeup request */
 128                                 set_bit(port, &uhci->resuming_ports);
 129                                 uhci->ports_timeout = jiffies +
 130                                                 msecs_to_jiffies(20);
 131
 132                                 /* Make sure we see the port again
 133                                  * after the resuming period is over. */
 134                                 mod_timer(&uhci_to_hcd(uhci)->rh_timer,
 135                                                 uhci->ports_timeout);
 136                         } else if (time_after_eq(jiffies,
 137                                                 uhci->ports_timeout)) {
 138                                 uhci_finish_suspend(uhci, port, port_addr);
 139                         }
 140                 }
 141         }
 142 }
 143
 144 static int uhci_hub_status_data(struct usb_hcd *hcd, char *buf)
 145 {
 146         struct uhci_hcd *uhci = hcd_to_uhci(hcd);
 147         unsigned long flags;
 148         int status = 0;
 149
 150         spin_lock_irqsave(&uhci->lock, flags);
 151
 152         uhci_scan_schedule(uhci, NULL);
 153         if (uhci->hc_inaccessible)
 154                 goto done;
 155         check_fsbr(uhci);
 156         uhci_check_ports(uhci);
 157
 158         status = get_hub_status_data(uhci, buf);
 159
 160         switch (uhci->rh_state) {
 161             case UHCI_RH_SUSPENDING:
 162             case UHCI_RH_SUSPENDED:
 163                 /* if port change, ask to be resumed */
 164                 if (status)
 165                         usb_hcd_resume_root_hub(hcd);
 166                 break;
 167
 168             case UHCI_RH_AUTO_STOPPED:
 169                 /* if port change, auto start */
 170                 if (status)
 171                         wakeup_rh(uhci);
 172                 break;
 173
 174             case UHCI_RH_RUNNING:
 175                 /* are any devices attached? */
 176                 if (!any_ports_active(uhci)) {
 177                         uhci->rh_state = UHCI_RH_RUNNING_NODEVS;
 178                         uhci->auto_stop_time = jiffies + HZ;
 179                 }
 180                 break;
 181
 182             case UHCI_RH_RUNNING_NODEVS:
 183                 /* auto-stop if nothing connected for 1 second */
 184                 if (any_ports_active(uhci))
 185                         uhci->rh_state = UHCI_RH_RUNNING;
 186                 else if (time_after_eq(jiffies, uhci->auto_stop_time))
 187                         suspend_rh(uhci, UHCI_RH_AUTO_STOPPED);
 188                 break;
 189
 190             default:
 191                 break;
 192         }
 193
 194 done:
 195         spin_unlock_irqrestore(&uhci->lock, flags);
 196         return status;
 197 }
 198
 199 /* size of returned buffer is part of USB spec */
 200 static int uhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 201                         u16 wIndex, char *buf, u16 wLength)
 202 {
 203         struct uhci_hcd *uhci = hcd_to_uhci(hcd);
 204         int status, lstatus, retval = 0, len = 0;
 205         unsigned int port = wIndex - 1;
 206         unsigned long port_addr = uhci->io_addr + USBPORTSC1 + 2 * port;
 207         u16 wPortChange, wPortStatus;
 208         unsigned long flags;
 209
 210         if (uhci->hc_inaccessible)
 211                 return -ETIMEDOUT;
 212
 213         spin_lock_irqsave(&uhci->lock, flags);
 214         switch (typeReq) {
 215
 216         case GetHubStatus:
 217                 *(__le32 *)buf = cpu_to_le32(0);
 218                 OK(4);          /* hub power */
 219         case GetPortStatus:
 220                 if (port >= uhci->rh_numports)
 221                         goto err;
 222
 223                 uhci_check_ports(uhci);
 224                 status = inw(port_addr);
 225
 226                 /* Intel controllers report the OverCurrent bit active on.
 227                  * VIA controllers report it active off, so we'll adjust the
 228                  * bit value.  (It's not standardized in the UHCI spec.)
 229                  */
 230                 if (to_pci_dev(hcd->self.controller)->vendor ==
 231                                 PCI_VENDOR_ID_VIA)
 232                         status ^= USBPORTSC_OC;
 233
 234                 /* UHCI doesn't support C_RESET (always false) */
 235                 wPortChange = lstatus = 0;
 236                 if (status & USBPORTSC_CSC)
 237                         wPortChange |= USB_PORT_STAT_C_CONNECTION;
 238                 if (status & USBPORTSC_PEC)
 239                         wPortChange |= USB_PORT_STAT_C_ENABLE;
 240                 if (status & USBPORTSC_OCC)
 241                         wPortChange |= USB_PORT_STAT_C_OVERCURRENT;
 242
 243                 if (test_bit(port, &uhci->port_c_suspend)) {
 244                         wPortChange |= USB_PORT_STAT_C_SUSPEND;
 245                         lstatus |= 1;
 246                 }
 247                 if (test_bit(port, &uhci->suspended_ports))
 248                         lstatus |= 2;
 249                 if (test_bit(port, &uhci->resuming_ports))
 250                         lstatus |= 4;
 251
 252                 /* UHCI has no power switching (always on) */
 253                 wPortStatus = USB_PORT_STAT_POWER;
 254                 if (status & USBPORTSC_CCS)
 255                         wPortStatus |= USB_PORT_STAT_CONNECTION;
 256                 if (status & USBPORTSC_PE) {
 257                         wPortStatus |= USB_PORT_STAT_ENABLE;
 258                         if (status & (USBPORTSC_SUSP | USBPORTSC_RD))
 259                                 wPortStatus |= USB_PORT_STAT_SUSPEND;
 260                 }
 261                 if (status & USBPORTSC_OC)
 262                         wPortStatus |= USB_PORT_STAT_OVERCURRENT;
 263                 if (status & USBPORTSC_PR)
 264                         wPortStatus |= USB_PORT_STAT_RESET;
 265                 if (status & USBPORTSC_LSDA)
 266                         wPortStatus |= USB_PORT_STAT_LOW_SPEED;
 267
 268                 if (wPortChange)
 269                         dev_dbg(uhci_dev(uhci), "port %d portsc %04x,%02x\n",
 270                                         wIndex, status, lstatus);
 271
 272                 *(__le16 *)buf = cpu_to_le16(wPortStatus);
 273                 *(__le16 *)(buf + 2) = cpu_to_le16(wPortChange);
 274                 OK(4);
 275         case SetHubFeature:             /* We don't implement these */
 276         case ClearHubFeature:
 277                 switch (wValue) {
 278                 case C_HUB_OVER_CURRENT:
 279                 case C_HUB_LOCAL_POWER:
 280                         OK(0);
 281                 default:
 282                         goto err;
 283                 }
 284                 break;
 285         case SetPortFeature:
 286                 if (port >= uhci->rh_numports)
 287                         goto err;
 288
 289                 switch (wValue) {
 290                 case USB_PORT_FEAT_SUSPEND:
 291                         set_bit(port, &uhci->suspended_ports);
 292                         SET_RH_PORTSTAT(USBPORTSC_SUSP);
 293                         OK(0);
 294                 case USB_PORT_FEAT_RESET:
 295                         SET_RH_PORTSTAT(USBPORTSC_PR);
 296
 297                         /* Reset terminates Resume signalling */
 298                         uhci_finish_suspend(uhci, port, port_addr);
 299
 300                         /* USB v2.0 7.1.7.5 */
 301                         uhci->ports_timeout = jiffies + msecs_to_jiffies(50);
 302                         OK(0);
 303                 case USB_PORT_FEAT_POWER:
 304                         /* UHCI has no power switching */
 305                         OK(0);
 306                 default:
 307                         goto err;
 308                 }
 309                 break;
 310         case ClearPortFeature:
 311                 if (port >= uhci->rh_numports)
 312                         goto err;
 313
 314                 switch (wValue) {
 315                 case USB_PORT_FEAT_ENABLE:
 316                         CLR_RH_PORTSTAT(USBPORTSC_PE);
 317
 318                         /* Disable terminates Resume signalling */
 319                         uhci_finish_suspend(uhci, port, port_addr);
 320                         OK(0);
 321                 case USB_PORT_FEAT_C_ENABLE:
 322                         CLR_RH_PORTSTAT(USBPORTSC_PEC);
 323                         OK(0);
 324                 case USB_PORT_FEAT_SUSPEND:
 325                         if (test_bit(port, &uhci->suspended_ports) &&
 326                                         !test_and_set_bit(port,
 327                                                 &uhci->resuming_ports)) {
 328                                 SET_RH_PORTSTAT(USBPORTSC_RD);
 329
 330                                 /* The controller won't allow RD to be set
 331                                  * if the port is disabled.  When this happens
 332                                  * just skip the Resume signalling.
 333                                  */
 334                                 if (!(inw(port_addr) & USBPORTSC_RD))
 335                                         uhci_finish_suspend(uhci, port,
 336                                                         port_addr);
 337                                 else
 338                                         /* USB v2.0 7.1.7.7 */
 339                                         uhci->ports_timeout = jiffies +
 340                                                 msecs_to_jiffies(20);
 341                         }
 342                         OK(0);
 343                 case USB_PORT_FEAT_C_SUSPEND:
 344                         clear_bit(port, &uhci->port_c_suspend);
 345                         OK(0);
 346                 case USB_PORT_FEAT_POWER:
 347                         /* UHCI has no power switching */
 348                         goto err;
 349                 case USB_PORT_FEAT_C_CONNECTION:
 350                         CLR_RH_PORTSTAT(USBPORTSC_CSC);
 351                         OK(0);
 352                 case USB_PORT_FEAT_C_OVER_CURRENT:
 353                         CLR_RH_PORTSTAT(USBPORTSC_OCC);
 354                         OK(0);
 355                 case USB_PORT_FEAT_C_RESET:
 356                         /* this driver won't report these */
 357                         OK(0);
 358                 default:
 359                         goto err;
 360                 }
 361                 break;
 362         case GetHubDescriptor:
 363                 len = min_t(unsigned int, sizeof(root_hub_hub_des), wLength);
 364                 memcpy(buf, root_hub_hub_des, len);
 365                 if (len > 2)
 366                         buf[2] = uhci->rh_numports;
 367                 OK(len);
 368         default:
 369 err:
 370                 retval = -EPIPE;
 371         }
 372         spin_unlock_irqrestore(&uhci->lock, flags);
 373
 374         return retval;
 375 }