drivers/usb/host/ohci-hub.c

   1 /*
   2  * OHCI HCD (Host Controller Driver) for USB.
   3  *
   4  * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
   5  * (C) Copyright 2000-2004 David Brownell <dbrownell@users.sourceforge.net>
   6  *
   7  * This file is licenced under GPL
   8  */
   9
  10 /*-------------------------------------------------------------------------*/
  11
  12 /*
  13  * OHCI Root Hub ... the nonsharable stuff
  14  */
  15
  16 #define dbg_port(hc,label,num,value) \
  17         ohci_dbg (hc, \
  18                 "%s roothub.portstatus [%d] " \
  19                 "= 0x%08x%s%s%s%s%s%s%s%s%s%s%s%s\n", \
  20                 label, num, temp, \
  21                 (temp & RH_PS_PRSC) ? " PRSC" : "", \
  22                 (temp & RH_PS_OCIC) ? " OCIC" : "", \
  23                 (temp & RH_PS_PSSC) ? " PSSC" : "", \
  24                 (temp & RH_PS_PESC) ? " PESC" : "", \
  25                 (temp & RH_PS_CSC) ? " CSC" : "", \
  26                 \
  27                 (temp & RH_PS_LSDA) ? " LSDA" : "", \
  28                 (temp & RH_PS_PPS) ? " PPS" : "", \
  29                 (temp & RH_PS_PRS) ? " PRS" : "", \
  30                 (temp & RH_PS_POCI) ? " POCI" : "", \
  31                 (temp & RH_PS_PSS) ? " PSS" : "", \
  32                 \
  33                 (temp & RH_PS_PES) ? " PES" : "", \
  34                 (temp & RH_PS_CCS) ? " CCS" : "" \
  35                 );
  36
  37 /*-------------------------------------------------------------------------*/
  38
  39 #define OHCI_SCHED_ENABLES \
  40         (OHCI_CTRL_CLE|OHCI_CTRL_BLE|OHCI_CTRL_PLE|OHCI_CTRL_IE)
  41
  42 static void dl_done_list (struct ohci_hcd *);
  43 static void finish_unlinks (struct ohci_hcd *, u16);
  44
  45 #ifdef  CONFIG_PM
  46 static int ohci_rh_suspend (struct ohci_hcd *ohci, int autostop)
  47 __releases(ohci->lock)
  48 __acquires(ohci->lock)
  49 {
  50         int                     status = 0;
  51
  52         ohci->hc_control = ohci_readl (ohci, &ohci->regs->control);
  53         switch (ohci->hc_control & OHCI_CTRL_HCFS) {
  54         case OHCI_USB_RESUME:
  55                 ohci_dbg (ohci, "resume/suspend?\n");
  56                 ohci->hc_control &= ~OHCI_CTRL_HCFS;
  57                 ohci->hc_control |= OHCI_USB_RESET;
  58                 ohci_writel (ohci, ohci->hc_control, &ohci->regs->control);
  59                 (void) ohci_readl (ohci, &ohci->regs->control);
  60                 /* FALL THROUGH */
  61         case OHCI_USB_RESET:
  62                 status = -EBUSY;
  63                 ohci_dbg (ohci, "needs reinit!\n");
  64                 goto done;
  65         case OHCI_USB_SUSPEND:
  66                 if (!ohci->autostop) {
  67                         ohci_dbg (ohci, "already suspended\n");
  68                         goto done;
  69                 }
  70         }
  71         ohci_dbg (ohci, "%s root hub\n",
  72                         autostop ? "auto-stop" : "suspend");
  73
  74         /* First stop any processing */
  75         if (!autostop && (ohci->hc_control & OHCI_SCHED_ENABLES)) {
  76                 ohci->hc_control &= ~OHCI_SCHED_ENABLES;
  77                 ohci_writel (ohci, ohci->hc_control, &ohci->regs->control);
  78                 ohci->hc_control = ohci_readl (ohci, &ohci->regs->control);
  79                 ohci_writel (ohci, OHCI_INTR_SF, &ohci->regs->intrstatus);
  80
  81                 /* sched disables take effect on the next frame,
  82                  * then the last WDH could take 6+ msec
  83                  */
  84                 ohci_dbg (ohci, "stopping schedules ...\n");
  85                 ohci->autostop = 0;
  86                 spin_unlock_irq (&ohci->lock);
  87                 msleep (8);
  88                 spin_lock_irq (&ohci->lock);
  89         }
  90         dl_done_list (ohci);
  91         finish_unlinks (ohci, ohci_frame_no(ohci));
  92
  93         /* maybe resume can wake root hub */
  94         if (ohci_to_hcd(ohci)->self.root_hub->do_remote_wakeup || autostop) {
  95                 ohci->hc_control |= OHCI_CTRL_RWE;
  96         } else {
  97                 ohci_writel(ohci, OHCI_INTR_RHSC | OHCI_INTR_RD,
  98                                 &ohci->regs->intrdisable);
  99                 ohci->hc_control &= ~OHCI_CTRL_RWE;
 100         }
 101
 102         /* Suspend hub ... this is the "global (to this bus) suspend" mode,
 103          * which doesn't imply ports will first be individually suspended.
 104          */
 105         ohci->hc_control &= ~OHCI_CTRL_HCFS;
 106         ohci->hc_control |= OHCI_USB_SUSPEND;
 107         ohci_writel (ohci, ohci->hc_control, &ohci->regs->control);
 108         (void) ohci_readl (ohci, &ohci->regs->control);
 109
 110         /* no resumes until devices finish suspending */
 111         if (!autostop) {
 112                 ohci->next_statechange = jiffies + msecs_to_jiffies (5);
 113                 ohci->autostop = 0;
 114         }
 115
 116 done:
 117         return status;
 118 }
 119
 120 static inline struct ed *find_head (struct ed *ed)
 121 {
 122         /* for bulk and control lists */
 123         while (ed->ed_prev)
 124                 ed = ed->ed_prev;
 125         return ed;
 126 }
 127
 128 /* caller has locked the root hub */
 129 static int ohci_rh_resume (struct ohci_hcd *ohci)
 130 __releases(ohci->lock)
 131 __acquires(ohci->lock)
 132 {
 133         struct usb_hcd          *hcd = ohci_to_hcd (ohci);
 134         u32                     temp, enables;
 135         int                     status = -EINPROGRESS;
 136         int                     autostopped = ohci->autostop;
 137
 138         ohci->autostop = 0;
 139         ohci->hc_control = ohci_readl (ohci, &ohci->regs->control);
 140
 141         if (ohci->hc_control & (OHCI_CTRL_IR | OHCI_SCHED_ENABLES)) {
 142                 /* this can happen after resuming a swsusp snapshot */
 143                 if (hcd->state == HC_STATE_RESUMING) {
 144                         ohci_dbg (ohci, "BIOS/SMM active, control %03x\n",
 145                                         ohci->hc_control);
 146                         status = -EBUSY;
 147                 /* this happens when pmcore resumes HC then root */
 148                 } else {
 149                         ohci_dbg (ohci, "duplicate resume\n");
 150                         status = 0;
 151                 }
 152         } else switch (ohci->hc_control & OHCI_CTRL_HCFS) {
 153         case OHCI_USB_SUSPEND:
 154                 ohci->hc_control &= ~(OHCI_CTRL_HCFS|OHCI_SCHED_ENABLES);
 155                 ohci->hc_control |= OHCI_USB_RESUME;
 156                 ohci_writel (ohci, ohci->hc_control, &ohci->regs->control);
 157                 (void) ohci_readl (ohci, &ohci->regs->control);
 158                 ohci_dbg (ohci, "%s root hub\n",
 159                                 autostopped ? "auto-start" : "resume");
 160                 break;
 161         case OHCI_USB_RESUME:
 162                 /* HCFS changes sometime after INTR_RD */
 163                 ohci_dbg(ohci, "%swakeup root hub\n",
 164                                 autostopped ? "auto-" : "");
 165                 break;
 166         case OHCI_USB_OPER:
 167                 /* this can happen after resuming a swsusp snapshot */
 168                 ohci_dbg (ohci, "snapshot resume? reinit\n");
 169                 status = -EBUSY;
 170                 break;
 171         default:                /* RESET, we lost power */
 172                 ohci_dbg (ohci, "lost power\n");
 173                 status = -EBUSY;
 174         }
 175         if (status == -EBUSY) {
 176                 if (!autostopped) {
 177                         spin_unlock_irq (&ohci->lock);
 178                         (void) ohci_init (ohci);
 179                         status = ohci_restart (ohci);
 180
 181                         usb_root_hub_lost_power(hcd->self.root_hub);
 182
 183                         spin_lock_irq (&ohci->lock);
 184                 }
 185                 return status;
 186         }
 187         if (status != -EINPROGRESS)
 188                 return status;
 189         if (autostopped)
 190                 goto skip_resume;
 191         spin_unlock_irq (&ohci->lock);
 192
 193         /* Some controllers (lucent erratum) need extra-long delays */
 194         msleep (20 /* usb 11.5.1.10 */ + 12 /* 32 msec counter */ + 1);
 195
 196         temp = ohci_readl (ohci, &ohci->regs->control);
 197         temp &= OHCI_CTRL_HCFS;
 198         if (temp != OHCI_USB_RESUME) {
 199                 ohci_err (ohci, "controller won't resume\n");
 200                 spin_lock_irq(&ohci->lock);
 201                 return -EBUSY;
 202         }
 203
 204         /* disable old schedule state, reinit from scratch */
 205         ohci_writel (ohci, 0, &ohci->regs->ed_controlhead);
 206         ohci_writel (ohci, 0, &ohci->regs->ed_controlcurrent);
 207         ohci_writel (ohci, 0, &ohci->regs->ed_bulkhead);
 208         ohci_writel (ohci, 0, &ohci->regs->ed_bulkcurrent);
 209         ohci_writel (ohci, 0, &ohci->regs->ed_periodcurrent);
 210         ohci_writel (ohci, (u32) ohci->hcca_dma, &ohci->regs->hcca);
 211
 212         /* Sometimes PCI D3 suspend trashes frame timings ... */
 213         periodic_reinit (ohci);
 214
 215         /* the following code is executed with ohci->lock held and
 216          * irqs disabled if and only if autostopped is true
 217          */
 218
 219 skip_resume:
 220         /* interrupts might have been disabled */
 221         ohci_writel (ohci, OHCI_INTR_INIT, &ohci->regs->intrenable);
 222         if (ohci->ed_rm_list)
 223                 ohci_writel (ohci, OHCI_INTR_SF, &ohci->regs->intrenable);
 224
 225         /* Then re-enable operations */
 226         ohci_writel (ohci, OHCI_USB_OPER, &ohci->regs->control);
 227         (void) ohci_readl (ohci, &ohci->regs->control);
 228         if (!autostopped)
 229                 msleep (3);
 230
 231         temp = ohci->hc_control;
 232         temp &= OHCI_CTRL_RWC;
 233         temp |= OHCI_CONTROL_INIT | OHCI_USB_OPER;
 234         ohci->hc_control = temp;
 235         ohci_writel (ohci, temp, &ohci->regs->control);
 236         (void) ohci_readl (ohci, &ohci->regs->control);
 237
 238         /* TRSMRCY */
 239         if (!autostopped) {
 240                 msleep (10);
 241                 spin_lock_irq (&ohci->lock);
 242         }
 243         /* now ohci->lock is always held and irqs are always disabled */
 244
 245         /* keep it alive for more than ~5x suspend + resume costs */
 246         ohci->next_statechange = jiffies + STATECHANGE_DELAY;
 247
 248         /* maybe turn schedules back on */
 249         enables = 0;
 250         temp = 0;
 251         if (!ohci->ed_rm_list) {
 252                 if (ohci->ed_controltail) {
 253                         ohci_writel (ohci,
 254                                         find_head (ohci->ed_controltail)->dma,
 255                                         &ohci->regs->ed_controlhead);
 256                         enables |= OHCI_CTRL_CLE;
 257                         temp |= OHCI_CLF;
 258                 }
 259                 if (ohci->ed_bulktail) {
 260                         ohci_writel (ohci, find_head (ohci->ed_bulktail)->dma,
 261                                 &ohci->regs->ed_bulkhead);
 262                         enables |= OHCI_CTRL_BLE;
 263                         temp |= OHCI_BLF;
 264                 }
 265         }
 266         if (hcd->self.bandwidth_isoc_reqs || hcd->self.bandwidth_int_reqs)
 267                 enables |= OHCI_CTRL_PLE|OHCI_CTRL_IE;
 268         if (enables) {
 269                 ohci_dbg (ohci, "restarting schedules ... %08x\n", enables);
 270                 ohci->hc_control |= enables;
 271                 ohci_writel (ohci, ohci->hc_control, &ohci->regs->control);
 272                 if (temp)
 273                         ohci_writel (ohci, temp, &ohci->regs->cmdstatus);
 274                 (void) ohci_readl (ohci, &ohci->regs->control);
 275         }
 276
 277         return 0;
 278 }
 279
 280 static int ohci_bus_suspend (struct usb_hcd *hcd)
 281 {
 282         struct ohci_hcd         *ohci = hcd_to_ohci (hcd);
 283         int                     rc;
 284
 285         spin_lock_irq (&ohci->lock);
 286
 287         if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)))
 288                 rc = -ESHUTDOWN;
 289         else
 290                 rc = ohci_rh_suspend (ohci, 0);
 291         spin_unlock_irq (&ohci->lock);
 292         return rc;
 293 }
 294
 295 static int ohci_bus_resume (struct usb_hcd *hcd)
 296 {
 297         struct ohci_hcd         *ohci = hcd_to_ohci (hcd);
 298         int                     rc;
 299
 300         if (time_before (jiffies, ohci->next_statechange))
 301                 msleep(5);
 302
 303         spin_lock_irq (&ohci->lock);
 304
 305         if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)))
 306                 rc = -ESHUTDOWN;
 307         else
 308                 rc = ohci_rh_resume (ohci);
 309         spin_unlock_irq (&ohci->lock);
 310
 311         /* poll until we know a device is connected or we autostop */
 312         if (rc == 0)
 313                 usb_hcd_poll_rh_status(hcd);
 314         return rc;
 315 }
 316
 317 /* Carry out the final steps of resuming the controller device */
 318 static void ohci_finish_controller_resume(struct usb_hcd *hcd)
 319 {
 320         struct ohci_hcd         *ohci = hcd_to_ohci(hcd);
 321         int                     port;
 322         bool                    need_reinit = false;
 323
 324         /* See if the controller is already running or has been reset */
 325         ohci->hc_control = ohci_readl(ohci, &ohci->regs->control);
 326         if (ohci->hc_control & (OHCI_CTRL_IR | OHCI_SCHED_ENABLES)) {
 327                 need_reinit = true;
 328         } else {
 329                 switch (ohci->hc_control & OHCI_CTRL_HCFS) {
 330                 case OHCI_USB_OPER:
 331                 case OHCI_USB_RESET:
 332                         need_reinit = true;
 333                 }
 334         }
 335
 336         /* If needed, reinitialize and suspend the root hub */
 337         if (need_reinit) {
 338                 spin_lock_irq(&ohci->lock);
 339                 hcd->state = HC_STATE_RESUMING;
 340                 ohci_rh_resume(ohci);
 341                 hcd->state = HC_STATE_QUIESCING;
 342                 ohci_rh_suspend(ohci, 0);
 343                 hcd->state = HC_STATE_SUSPENDED;
 344                 spin_unlock_irq(&ohci->lock);
 345         }
 346
 347         /* Normally just turn on port power and enable interrupts */
 348         else {
 349                 ohci_dbg(ohci, "powerup ports\n");
 350                 for (port = 0; port < ohci->num_ports; port++)
 351                         ohci_writel(ohci, RH_PS_PPS,
 352                                         &ohci->regs->roothub.portstatus[port]);
 353
 354                 ohci_writel(ohci, OHCI_INTR_MIE, &ohci->regs->intrenable);
 355                 ohci_readl(ohci, &ohci->regs->intrenable);
 356                 msleep(20);
 357         }
 358 }
 359
 360 /* Carry out polling-, autostop-, and autoresume-related state changes */
 361 static int ohci_root_hub_state_changes(struct ohci_hcd *ohci, int changed,
 362                 int any_connected)
 363 {
 364         int     poll_rh = 1;
 365         int     rhsc_status, rhsc_enable;
 366
 367         /* Some broken controllers never turn off RHCS in the interrupt
 368          * status register.  For their sake we won't re-enable RHSC
 369          * interrupts if the interrupt bit is already active.
 370          */
 371         rhsc_status = ohci_readl(ohci, &ohci->regs->intrstatus) &
 372                         OHCI_INTR_RHSC;
 373         rhsc_enable = ohci_readl(ohci, &ohci->regs->intrenable) &
 374                         OHCI_INTR_RHSC;
 375
 376         switch (ohci->hc_control & OHCI_CTRL_HCFS) {
 377         case OHCI_USB_OPER:
 378                 /* If no status changes are pending, enable RHSC interrupts. */
 379                 if (!rhsc_enable && !rhsc_status && !changed) {
 380                         rhsc_enable = OHCI_INTR_RHSC;
 381                         ohci_writel(ohci, rhsc_enable, &ohci->regs->intrenable);
 382                 }
 383
 384                 /* Keep on polling until we know a device is connected
 385                  * and RHSC is enabled, or until we autostop.
 386                  */
 387                 if (!ohci->autostop) {
 388                         if (any_connected ||
 389                                         !device_may_wakeup(&ohci_to_hcd(ohci)
 390                                                 ->self.root_hub->dev)) {
 391                                 if (rhsc_enable)
 392                                         poll_rh = 0;
 393                         } else {
 394                                 ohci->autostop = 1;
 395                                 ohci->next_statechange = jiffies + HZ;
 396                         }
 397
 398                 /* if no devices have been attached for one second, autostop */
 399                 } else {
 400                         if (changed || any_connected) {
 401                                 ohci->autostop = 0;
 402                                 ohci->next_statechange = jiffies +
 403                                                 STATECHANGE_DELAY;
 404                         } else if (time_after_eq(jiffies,
 405                                                 ohci->next_statechange)
 406                                         && !ohci->ed_rm_list
 407                                         && !(ohci->hc_control &
 408                                                 OHCI_SCHED_ENABLES)) {
 409                                 ohci_rh_suspend(ohci, 1);
 410                                 if (rhsc_enable)
 411                                         poll_rh = 0;
 412                         }
 413                 }
 414                 break;
 415
 416         case OHCI_USB_SUSPEND:
 417         case OHCI_USB_RESUME:
 418                 /* if there is a port change, autostart or ask to be resumed */
 419                 if (changed) {
 420                         if (ohci->autostop)
 421                                 ohci_rh_resume(ohci);
 422                         else
 423                                 usb_hcd_resume_root_hub(ohci_to_hcd(ohci));
 424                 } else {
 425                         if (!rhsc_enable && !rhsc_status && (ohci->autostop ||
 426                                         ohci_to_hcd(ohci)->self.root_hub->
 427                                                 do_remote_wakeup)) {
 428                                 rhsc_enable = OHCI_INTR_RHSC;
 429                                 ohci_writel(ohci, rhsc_enable,
 430                                                 &ohci->regs->intrenable);
 431                         }
 432                         if (rhsc_enable)
 433                                 poll_rh = 0;
 434                 }
 435                 break;
 436         }
 437         return poll_rh;
 438 }
 439
 440 #else   /* CONFIG_PM */
 441
 442 static inline int ohci_rh_resume(struct ohci_hcd *ohci)
 443 {
 444         return 0;
 445 }
 446
 447 /* Carry out polling-related state changes.
 448  * autostop isn't used when CONFIG_PM is turned off.
 449  */
 450 static int ohci_root_hub_state_changes(struct ohci_hcd *ohci, int changed,
 451                 int any_connected)
 452 {
 453         int     rhsc_status;
 454
 455         /* If RHSC is enabled, don't poll */
 456         if (ohci_readl(ohci, &ohci->regs->intrenable) & OHCI_INTR_RHSC)
 457                 return 0;
 458
 459         /* If no status changes are pending, enable RHSC interrupts */
 460         rhsc_status = ohci_readl(ohci, &ohci->regs->intrstatus) &
 461                         OHCI_INTR_RHSC;
 462         if (!changed && !rhsc_status) {
 463                 ohci_writel(ohci, OHCI_INTR_RHSC, &ohci->regs->intrenable);
 464                 return 0;
 465         }
 466         return 1;
 467 }
 468
 469 #endif  /* CONFIG_PM */
 470
 471 /*-------------------------------------------------------------------------*/
 472
 473 /* build "status change" packet (one or two bytes) from HC registers */
 474
 475 static int
 476 ohci_hub_status_data (struct usb_hcd *hcd, char *buf)
 477 {
 478         struct ohci_hcd *ohci = hcd_to_ohci (hcd);
 479         int             i, changed = 0, length = 1;
 480         int             any_connected = 0;
 481         unsigned long   flags;
 482
 483         spin_lock_irqsave (&ohci->lock, flags);
 484         if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags))
 485                 goto done;
 486
 487         /* undocumented erratum seen on at least rev D */
 488         if ((ohci->flags & OHCI_QUIRK_AMD756)
 489                         && (roothub_a (ohci) & RH_A_NDP) > MAX_ROOT_PORTS) {
 490                 ohci_warn (ohci, "bogus NDP, rereads as NDP=%d\n",
 491                           ohci_readl (ohci, &ohci->regs->roothub.a) & RH_A_NDP);
 492                 /* retry later; "should not happen" */
 493                 goto done;
 494         }
 495
 496         /* init status */
 497         if (roothub_status (ohci) & (RH_HS_LPSC | RH_HS_OCIC))
 498                 buf [0] = changed = 1;
 499         else
 500                 buf [0] = 0;
 501         if (ohci->num_ports > 7) {
 502                 buf [1] = 0;
 503                 length++;
 504         }
 505
 506         /* look at each port */
 507         for (i = 0; i < ohci->num_ports; i++) {
 508                 u32     status = roothub_portstatus (ohci, i);
 509
 510                 /* can't autostop if ports are connected */
 511                 any_connected |= (status & RH_PS_CCS);
 512
 513                 if (status & (RH_PS_CSC | RH_PS_PESC | RH_PS_PSSC
 514                                 | RH_PS_OCIC | RH_PS_PRSC)) {
 515                         changed = 1;
 516                         if (i < 7)
 517                             buf [0] |= 1 << (i + 1);
 518                         else
 519                             buf [1] |= 1 << (i - 7);
 520                 }
 521         }
 522
 523         hcd->poll_rh = ohci_root_hub_state_changes(ohci, changed,
 524                         any_connected);
 525
 526 done:
 527         spin_unlock_irqrestore (&ohci->lock, flags);
 528
 529         return changed ? length : 0;
 530 }
 531
 532 /*-------------------------------------------------------------------------*/
 533
 534 static void
 535 ohci_hub_descriptor (
 536         struct ohci_hcd                 *ohci,
 537         struct usb_hub_descriptor       *desc
 538 ) {
 539         u32             rh = roothub_a (ohci);
 540         u16             temp;
 541
 542         desc->bDescriptorType = 0x29;
 543         desc->bPwrOn2PwrGood = (rh & RH_A_POTPGT) >> 24;
 544         desc->bHubContrCurrent = 0;
 545
 546         desc->bNbrPorts = ohci->num_ports;
 547         temp = 1 + (ohci->num_ports / 8);
 548         desc->bDescLength = 7 + 2 * temp;
 549
 550         temp = 0;
 551         if (rh & RH_A_NPS)              /* no power switching? */
 552             temp |= 0x0002;
 553         if (rh & RH_A_PSM)              /* per-port power switching? */
 554             temp |= 0x0001;
 555         if (rh & RH_A_NOCP)             /* no overcurrent reporting? */
 556             temp |= 0x0010;
 557         else if (rh & RH_A_OCPM)        /* per-port overcurrent reporting? */
 558             temp |= 0x0008;
 559         desc->wHubCharacteristics = (__force __u16)cpu_to_hc16(ohci, temp);
 560
 561         /* two bitmaps:  ports removable, and usb 1.0 legacy PortPwrCtrlMask */
 562         rh = roothub_b (ohci);
 563         memset(desc->bitmap, 0xff, sizeof(desc->bitmap));
 564         desc->bitmap [0] = rh & RH_B_DR;
 565         if (ohci->num_ports > 7) {
 566                 desc->bitmap [1] = (rh & RH_B_DR) >> 8;
 567                 desc->bitmap [2] = 0xff;
 568         } else
 569                 desc->bitmap [1] = 0xff;
 570 }
 571
 572 /*-------------------------------------------------------------------------*/
 573
 574 #ifdef  CONFIG_USB_OTG
 575
 576 static int ohci_start_port_reset (struct usb_hcd *hcd, unsigned port)
 577 {
 578         struct ohci_hcd *ohci = hcd_to_ohci (hcd);
 579         u32                     status;
 580
 581         if (!port)
 582                 return -EINVAL;
 583         port--;
 584
 585         /* start port reset before HNP protocol times out */
 586         status = ohci_readl(ohci, &ohci->regs->roothub.portstatus [port]);
 587         if (!(status & RH_PS_CCS))
 588                 return -ENODEV;
 589
 590         /* khubd will finish the reset later */
 591         ohci_writel(ohci, RH_PS_PRS, &ohci->regs->roothub.portstatus [port]);
 592         return 0;
 593 }
 594
 595 #else
 596
 597 #define ohci_start_port_reset           NULL
 598
 599 #endif
 600
 601 /*-------------------------------------------------------------------------*/
 602
 603
 604 /* See usb 7.1.7.5:  root hubs must issue at least 50 msec reset signaling,
 605  * not necessarily continuous ... to guard against resume signaling.
 606  * The short timeout is safe for non-root hubs, and is backward-compatible
 607  * with earlier Linux hosts.
 608  */
 609 #ifdef  CONFIG_USB_SUSPEND
 610 #define PORT_RESET_MSEC         50
 611 #else
 612 #define PORT_RESET_MSEC         10
 613 #endif
 614
 615 /* this timer value might be vendor-specific ... */
 616 #define PORT_RESET_HW_MSEC      10
 617
 618 /* wrap-aware logic morphed from <linux/jiffies.h> */
 619 #define tick_before(t1,t2) ((s16)(((s16)(t1))-((s16)(t2))) < 0)
 620
 621 /* called from some task, normally khubd */
 622 static inline int root_port_reset (struct ohci_hcd *ohci, unsigned port)
 623 {
 624         __hc32 __iomem *portstat = &ohci->regs->roothub.portstatus [port];
 625         u32     temp = 0;
 626         u16     now = ohci_readl(ohci, &ohci->regs->fmnumber);
 627         u16     reset_done = now + PORT_RESET_MSEC;
 628         int     limit_1 = DIV_ROUND_UP(PORT_RESET_MSEC, PORT_RESET_HW_MSEC);
 629
 630         /* build a "continuous enough" reset signal, with up to
 631          * 3msec gap between pulses.  scheduler HZ==100 must work;
 632          * this might need to be deadline-scheduled.
 633          */
 634         do {
 635                 int limit_2;
 636
 637                 /* spin until any current reset finishes */
 638                 limit_2 = PORT_RESET_HW_MSEC * 2;
 639                 while (--limit_2 >= 0) {
 640                         temp = ohci_readl (ohci, portstat);
 641                         /* handle e.g. CardBus eject */
 642                         if (temp == ~(u32)0)
 643                                 return -ESHUTDOWN;
 644                         if (!(temp & RH_PS_PRS))
 645                                 break;
 646                         udelay (500);
 647                 }
 648
 649                 /* timeout (a hardware error) has been observed when
 650                  * EHCI sets CF while this driver is resetting a port;
 651                  * presumably other disconnect paths might do it too.
 652                  */
 653                 if (limit_2 < 0) {
 654                         ohci_dbg(ohci,
 655                                 "port[%d] reset timeout, stat %08x\n",
 656                                 port, temp);
 657                         break;
 658                 }
 659
 660                 if (!(temp & RH_PS_CCS))
 661                         break;
 662                 if (temp & RH_PS_PRSC)
 663                         ohci_writel (ohci, RH_PS_PRSC, portstat);
 664
 665                 /* start the next reset, sleep till it's probably done */
 666                 ohci_writel (ohci, RH_PS_PRS, portstat);
 667                 msleep(PORT_RESET_HW_MSEC);
 668                 now = ohci_readl(ohci, &ohci->regs->fmnumber);
 669         } while (tick_before(now, reset_done) && --limit_1 >= 0);
 670
 671         /* caller synchronizes using PRSC ... and handles PRS
 672          * still being set when this returns.
 673          */
 674
 675         return 0;
 676 }
 677
 678 static int ohci_hub_control (
 679         struct usb_hcd  *hcd,
 680         u16             typeReq,
 681         u16             wValue,
 682         u16             wIndex,
 683         char            *buf,
 684         u16             wLength
 685 ) {
 686         struct ohci_hcd *ohci = hcd_to_ohci (hcd);
 687         int             ports = hcd_to_bus (hcd)->root_hub->maxchild;
 688         u32             temp;
 689         int             retval = 0;
 690
 691         if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)))
 692                 return -ESHUTDOWN;
 693
 694         switch (typeReq) {
 695         case ClearHubFeature:
 696                 switch (wValue) {
 697                 case C_HUB_OVER_CURRENT:
 698                         ohci_writel (ohci, RH_HS_OCIC,
 699                                         &ohci->regs->roothub.status);
 700                 case C_HUB_LOCAL_POWER:
 701                         break;
 702                 default:
 703                         goto error;
 704                 }
 705                 break;
 706         case ClearPortFeature:
 707                 if (!wIndex || wIndex > ports)
 708                         goto error;
 709                 wIndex--;
 710
 711                 switch (wValue) {
 712                 case USB_PORT_FEAT_ENABLE:
 713                         temp = RH_PS_CCS;
 714                         break;
 715                 case USB_PORT_FEAT_C_ENABLE:
 716                         temp = RH_PS_PESC;
 717                         break;
 718                 case USB_PORT_FEAT_SUSPEND:
 719                         temp = RH_PS_POCI;
 720                         break;
 721                 case USB_PORT_FEAT_C_SUSPEND:
 722                         temp = RH_PS_PSSC;
 723                         break;
 724                 case USB_PORT_FEAT_POWER:
 725                         temp = RH_PS_LSDA;
 726                         break;
 727                 case USB_PORT_FEAT_C_CONNECTION:
 728                         temp = RH_PS_CSC;
 729                         break;
 730                 case USB_PORT_FEAT_C_OVER_CURRENT:
 731                         temp = RH_PS_OCIC;
 732                         break;
 733                 case USB_PORT_FEAT_C_RESET:
 734                         temp = RH_PS_PRSC;
 735                         break;
 736                 default:
 737                         goto error;
 738                 }
 739                 ohci_writel (ohci, temp,
 740                                 &ohci->regs->roothub.portstatus [wIndex]);
 741                 // ohci_readl (ohci, &ohci->regs->roothub.portstatus [wIndex]);
 742                 break;
 743         case GetHubDescriptor:
 744                 ohci_hub_descriptor (ohci, (struct usb_hub_descriptor *) buf);
 745                 break;
 746         case GetHubStatus:
 747                 temp = roothub_status (ohci) & ~(RH_HS_CRWE | RH_HS_DRWE);
 748                 put_unaligned_le32(temp, buf);
 749                 break;
 750         case GetPortStatus:
 751                 if (!wIndex || wIndex > ports)
 752                         goto error;
 753                 wIndex--;
 754                 temp = roothub_portstatus (ohci, wIndex);
 755                 put_unaligned_le32(temp, buf);
 756
 757 #ifndef OHCI_VERBOSE_DEBUG
 758         if (*(u16*)(buf+2))     /* only if wPortChange is interesting */
 759 #endif
 760                 dbg_port (ohci, "GetStatus", wIndex, temp);
 761                 break;
 762         case SetHubFeature:
 763                 switch (wValue) {
 764                 case C_HUB_OVER_CURRENT:
 765                         // FIXME:  this can be cleared, yes?
 766                 case C_HUB_LOCAL_POWER:
 767                         break;
 768                 default:
 769                         goto error;
 770                 }
 771                 break;
 772         case SetPortFeature:
 773                 if (!wIndex || wIndex > ports)
 774                         goto error;
 775                 wIndex--;
 776                 switch (wValue) {
 777                 case USB_PORT_FEAT_SUSPEND:
 778 #ifdef  CONFIG_USB_OTG
 779                         if (hcd->self.otg_port == (wIndex + 1)
 780                                         && hcd->self.b_hnp_enable)
 781                                 ohci->start_hnp(ohci);
 782                         else
 783 #endif
 784                         ohci_writel (ohci, RH_PS_PSS,
 785                                 &ohci->regs->roothub.portstatus [wIndex]);
 786                         break;
 787                 case USB_PORT_FEAT_POWER:
 788                         ohci_writel (ohci, RH_PS_PPS,
 789                                 &ohci->regs->roothub.portstatus [wIndex]);
 790                         break;
 791                 case USB_PORT_FEAT_RESET:
 792                         retval = root_port_reset (ohci, wIndex);
 793                         break;
 794                 default:
 795                         goto error;
 796                 }
 797                 break;
 798
 799         default:
 800 error:
 801                 /* "protocol stall" on error */
 802                 retval = -EPIPE;
 803         }
 804         return retval;
 805 }
 806