]> www.pilppa.org Git - linux-2.6-omap-h63xx.git/blob - drivers/usb/host/ehci.h
USB: UHCI: improve scheduling of interrupt URBs
[linux-2.6-omap-h63xx.git] / drivers / usb / host / ehci.h
1 /*
2  * Copyright (c) 2001-2002 by David Brownell
3  *
4  * This program is free software; you can redistribute it and/or modify it
5  * under the terms of the GNU General Public License as published by the
6  * Free Software Foundation; either version 2 of the License, or (at your
7  * option) any later version.
8  *
9  * This program is distributed in the hope that it will be useful, but
10  * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
11  * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
12  * for more details.
13  *
14  * You should have received a copy of the GNU General Public License
15  * along with this program; if not, write to the Free Software Foundation,
16  * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
17  */
18
19 #ifndef __LINUX_EHCI_HCD_H
20 #define __LINUX_EHCI_HCD_H
21
22 /* definitions used for the EHCI driver */
23
24 /*
25  * __hc32 and __hc16 are "Host Controller" types, they may be equivalent to
26  * __leXX (normally) or __beXX (given EHCI_BIG_ENDIAN_DESC), depending on
27  * the host controller implementation.
28  *
29  * To facilitate the strongest possible byte-order checking from "sparse"
30  * and so on, we use __leXX unless that's not practical.
31  */
32 #ifdef CONFIG_USB_EHCI_BIG_ENDIAN_DESC
33 typedef __u32 __bitwise __hc32;
34 typedef __u16 __bitwise __hc16;
35 #else
36 #define __hc32  __le32
37 #define __hc16  __le16
38 #endif
39
40 /* statistics can be kept for for tuning/monitoring */
41 struct ehci_stats {
42         /* irq usage */
43         unsigned long           normal;
44         unsigned long           error;
45         unsigned long           reclaim;
46         unsigned long           lost_iaa;
47
48         /* termination of urbs from core */
49         unsigned long           complete;
50         unsigned long           unlink;
51 };
52
53 /* ehci_hcd->lock guards shared data against other CPUs:
54  *   ehci_hcd:  async, reclaim, periodic (and shadow), ...
55  *   usb_host_endpoint: hcpriv
56  *   ehci_qh:   qh_next, qtd_list
57  *   ehci_qtd:  qtd_list
58  *
59  * Also, hold this lock when talking to HC registers or
60  * when updating hw_* fields in shared qh/qtd/... structures.
61  */
62
63 #define EHCI_MAX_ROOT_PORTS     15              /* see HCS_N_PORTS */
64
65 struct ehci_hcd {                       /* one per controller */
66         /* glue to PCI and HCD framework */
67         struct ehci_caps __iomem *caps;
68         struct ehci_regs __iomem *regs;
69         struct ehci_dbg_port __iomem *debug;
70
71         __u32                   hcs_params;     /* cached register copy */
72         spinlock_t              lock;
73
74         /* async schedule support */
75         struct ehci_qh          *async;
76         struct ehci_qh          *reclaim;
77         unsigned                scanning : 1;
78
79         /* periodic schedule support */
80 #define DEFAULT_I_TDPS          1024            /* some HCs can do less */
81         unsigned                periodic_size;
82         __hc32                  *periodic;      /* hw periodic table */
83         dma_addr_t              periodic_dma;
84         unsigned                i_thresh;       /* uframes HC might cache */
85
86         union ehci_shadow       *pshadow;       /* mirror hw periodic table */
87         int                     next_uframe;    /* scan periodic, start here */
88         unsigned                periodic_sched; /* periodic activity count */
89
90         /* per root hub port */
91         unsigned long           reset_done [EHCI_MAX_ROOT_PORTS];
92
93         /* bit vectors (one bit per port) */
94         unsigned long           bus_suspended;          /* which ports were
95                         already suspended at the start of a bus suspend */
96         unsigned long           companion_ports;        /* which ports are
97                         dedicated to the companion controller */
98         unsigned long           owned_ports;            /* which ports are
99                         owned by the companion during a bus suspend */
100         unsigned long           port_c_suspend;         /* which ports have
101                         the change-suspend feature turned on */
102
103         /* per-HC memory pools (could be per-bus, but ...) */
104         struct dma_pool         *qh_pool;       /* qh per active urb */
105         struct dma_pool         *qtd_pool;      /* one or more per qh */
106         struct dma_pool         *itd_pool;      /* itd per iso urb */
107         struct dma_pool         *sitd_pool;     /* sitd per split iso urb */
108
109         struct timer_list       iaa_watchdog;
110         struct timer_list       watchdog;
111         unsigned long           actions;
112         unsigned                stamp;
113         unsigned long           next_statechange;
114         u32                     command;
115
116         /* SILICON QUIRKS */
117         unsigned                no_selective_suspend:1;
118         unsigned                has_fsl_port_bug:1; /* FreeScale */
119         unsigned                big_endian_mmio:1;
120         unsigned                big_endian_desc:1;
121
122         u8                      sbrn;           /* packed release number */
123
124         /* irq statistics */
125 #ifdef EHCI_STATS
126         struct ehci_stats       stats;
127 #       define COUNT(x) do { (x)++; } while (0)
128 #else
129 #       define COUNT(x) do {} while (0)
130 #endif
131
132         /* debug files */
133 #ifdef DEBUG
134         struct dentry           *debug_dir;
135         struct dentry           *debug_async;
136         struct dentry           *debug_periodic;
137         struct dentry           *debug_registers;
138 #endif
139 };
140
141 /* convert between an HCD pointer and the corresponding EHCI_HCD */
142 static inline struct ehci_hcd *hcd_to_ehci (struct usb_hcd *hcd)
143 {
144         return (struct ehci_hcd *) (hcd->hcd_priv);
145 }
146 static inline struct usb_hcd *ehci_to_hcd (struct ehci_hcd *ehci)
147 {
148         return container_of ((void *) ehci, struct usb_hcd, hcd_priv);
149 }
150
151
152 static inline void
153 iaa_watchdog_start(struct ehci_hcd *ehci)
154 {
155         WARN_ON(timer_pending(&ehci->iaa_watchdog));
156         mod_timer(&ehci->iaa_watchdog,
157                         jiffies + msecs_to_jiffies(EHCI_IAA_MSECS));
158 }
159
160 static inline void iaa_watchdog_done(struct ehci_hcd *ehci)
161 {
162         del_timer(&ehci->iaa_watchdog);
163 }
164
165 enum ehci_timer_action {
166         TIMER_IO_WATCHDOG,
167         TIMER_ASYNC_SHRINK,
168         TIMER_ASYNC_OFF,
169 };
170
171 static inline void
172 timer_action_done (struct ehci_hcd *ehci, enum ehci_timer_action action)
173 {
174         clear_bit (action, &ehci->actions);
175 }
176
177 static inline void
178 timer_action (struct ehci_hcd *ehci, enum ehci_timer_action action)
179 {
180         /* Don't override timeouts which shrink or (later) disable
181          * the async ring; just the I/O watchdog.  Note that if a
182          * SHRINK were pending, OFF would never be requested.
183          */
184         if (timer_pending(&ehci->watchdog)
185                         && ((BIT(TIMER_ASYNC_SHRINK) | BIT(TIMER_ASYNC_OFF))
186                                 & ehci->actions))
187                 return;
188
189         if (!test_and_set_bit (action, &ehci->actions)) {
190                 unsigned long t;
191
192                 switch (action) {
193                 case TIMER_IO_WATCHDOG:
194                         t = EHCI_IO_JIFFIES;
195                         break;
196                 case TIMER_ASYNC_OFF:
197                         t = EHCI_ASYNC_JIFFIES;
198                         break;
199                 // case TIMER_ASYNC_SHRINK:
200                 default:
201                         /* add a jiffie since we synch against the
202                          * 8 KHz uframe counter.
203                          */
204                         t = DIV_ROUND_UP(EHCI_SHRINK_FRAMES * HZ, 1000) + 1;
205                         break;
206                 }
207                 mod_timer(&ehci->watchdog, t + jiffies);
208         }
209 }
210
211 /*-------------------------------------------------------------------------*/
212
213 #include <linux/usb/ehci_def.h>
214
215 /*-------------------------------------------------------------------------*/
216
217 #define QTD_NEXT(ehci, dma)     cpu_to_hc32(ehci, (u32)dma)
218
219 /*
220  * EHCI Specification 0.95 Section 3.5
221  * QTD: describe data transfer components (buffer, direction, ...)
222  * See Fig 3-6 "Queue Element Transfer Descriptor Block Diagram".
223  *
224  * These are associated only with "QH" (Queue Head) structures,
225  * used with control, bulk, and interrupt transfers.
226  */
227 struct ehci_qtd {
228         /* first part defined by EHCI spec */
229         __hc32                  hw_next;        /* see EHCI 3.5.1 */
230         __hc32                  hw_alt_next;    /* see EHCI 3.5.2 */
231         __hc32                  hw_token;       /* see EHCI 3.5.3 */
232 #define QTD_TOGGLE      (1 << 31)       /* data toggle */
233 #define QTD_LENGTH(tok) (((tok)>>16) & 0x7fff)
234 #define QTD_IOC         (1 << 15)       /* interrupt on complete */
235 #define QTD_CERR(tok)   (((tok)>>10) & 0x3)
236 #define QTD_PID(tok)    (((tok)>>8) & 0x3)
237 #define QTD_STS_ACTIVE  (1 << 7)        /* HC may execute this */
238 #define QTD_STS_HALT    (1 << 6)        /* halted on error */
239 #define QTD_STS_DBE     (1 << 5)        /* data buffer error (in HC) */
240 #define QTD_STS_BABBLE  (1 << 4)        /* device was babbling (qtd halted) */
241 #define QTD_STS_XACT    (1 << 3)        /* device gave illegal response */
242 #define QTD_STS_MMF     (1 << 2)        /* incomplete split transaction */
243 #define QTD_STS_STS     (1 << 1)        /* split transaction state */
244 #define QTD_STS_PING    (1 << 0)        /* issue PING? */
245
246 #define ACTIVE_BIT(ehci)        cpu_to_hc32(ehci, QTD_STS_ACTIVE)
247 #define HALT_BIT(ehci)          cpu_to_hc32(ehci, QTD_STS_HALT)
248 #define STATUS_BIT(ehci)        cpu_to_hc32(ehci, QTD_STS_STS)
249
250         __hc32                  hw_buf [5];        /* see EHCI 3.5.4 */
251         __hc32                  hw_buf_hi [5];        /* Appendix B */
252
253         /* the rest is HCD-private */
254         dma_addr_t              qtd_dma;                /* qtd address */
255         struct list_head        qtd_list;               /* sw qtd list */
256         struct urb              *urb;                   /* qtd's urb */
257         size_t                  length;                 /* length of buffer */
258 } __attribute__ ((aligned (32)));
259
260 /* mask NakCnt+T in qh->hw_alt_next */
261 #define QTD_MASK(ehci)  cpu_to_hc32 (ehci, ~0x1f)
262
263 #define IS_SHORT_READ(token) (QTD_LENGTH (token) != 0 && QTD_PID (token) == 1)
264
265 /*-------------------------------------------------------------------------*/
266
267 /* type tag from {qh,itd,sitd,fstn}->hw_next */
268 #define Q_NEXT_TYPE(ehci,dma)   ((dma) & cpu_to_hc32(ehci, 3 << 1))
269
270 /*
271  * Now the following defines are not converted using the
272  * __constant_cpu_to_le32() macro anymore, since we have to support
273  * "dynamic" switching between be and le support, so that the driver
274  * can be used on one system with SoC EHCI controller using big-endian
275  * descriptors as well as a normal little-endian PCI EHCI controller.
276  */
277 /* values for that type tag */
278 #define Q_TYPE_ITD      (0 << 1)
279 #define Q_TYPE_QH       (1 << 1)
280 #define Q_TYPE_SITD     (2 << 1)
281 #define Q_TYPE_FSTN     (3 << 1)
282
283 /* next async queue entry, or pointer to interrupt/periodic QH */
284 #define QH_NEXT(ehci,dma)       (cpu_to_hc32(ehci, (((u32)dma)&~0x01f)|Q_TYPE_QH))
285
286 /* for periodic/async schedules and qtd lists, mark end of list */
287 #define EHCI_LIST_END(ehci)     cpu_to_hc32(ehci, 1) /* "null pointer" to hw */
288
289 /*
290  * Entries in periodic shadow table are pointers to one of four kinds
291  * of data structure.  That's dictated by the hardware; a type tag is
292  * encoded in the low bits of the hardware's periodic schedule.  Use
293  * Q_NEXT_TYPE to get the tag.
294  *
295  * For entries in the async schedule, the type tag always says "qh".
296  */
297 union ehci_shadow {
298         struct ehci_qh          *qh;            /* Q_TYPE_QH */
299         struct ehci_itd         *itd;           /* Q_TYPE_ITD */
300         struct ehci_sitd        *sitd;          /* Q_TYPE_SITD */
301         struct ehci_fstn        *fstn;          /* Q_TYPE_FSTN */
302         __hc32                  *hw_next;       /* (all types) */
303         void                    *ptr;
304 };
305
306 /*-------------------------------------------------------------------------*/
307
308 /*
309  * EHCI Specification 0.95 Section 3.6
310  * QH: describes control/bulk/interrupt endpoints
311  * See Fig 3-7 "Queue Head Structure Layout".
312  *
313  * These appear in both the async and (for interrupt) periodic schedules.
314  */
315
316 struct ehci_qh {
317         /* first part defined by EHCI spec */
318         __hc32                  hw_next;        /* see EHCI 3.6.1 */
319         __hc32                  hw_info1;       /* see EHCI 3.6.2 */
320 #define QH_HEAD         0x00008000
321         __hc32                  hw_info2;        /* see EHCI 3.6.2 */
322 #define QH_SMASK        0x000000ff
323 #define QH_CMASK        0x0000ff00
324 #define QH_HUBADDR      0x007f0000
325 #define QH_HUBPORT      0x3f800000
326 #define QH_MULT         0xc0000000
327         __hc32                  hw_current;     /* qtd list - see EHCI 3.6.4 */
328
329         /* qtd overlay (hardware parts of a struct ehci_qtd) */
330         __hc32                  hw_qtd_next;
331         __hc32                  hw_alt_next;
332         __hc32                  hw_token;
333         __hc32                  hw_buf [5];
334         __hc32                  hw_buf_hi [5];
335
336         /* the rest is HCD-private */
337         dma_addr_t              qh_dma;         /* address of qh */
338         union ehci_shadow       qh_next;        /* ptr to qh; or periodic */
339         struct list_head        qtd_list;       /* sw qtd list */
340         struct ehci_qtd         *dummy;
341         struct ehci_qh          *reclaim;       /* next to reclaim */
342
343         struct ehci_hcd         *ehci;
344
345         /*
346          * Do NOT use atomic operations for QH refcounting. On some CPUs
347          * (PPC7448 for example), atomic operations cannot be performed on
348          * memory that is cache-inhibited (i.e. being used for DMA).
349          * Spinlocks are used to protect all QH fields.
350          */
351         u32                     refcount;
352         unsigned                stamp;
353
354         u8                      qh_state;
355 #define QH_STATE_LINKED         1               /* HC sees this */
356 #define QH_STATE_UNLINK         2               /* HC may still see this */
357 #define QH_STATE_IDLE           3               /* HC doesn't see this */
358 #define QH_STATE_UNLINK_WAIT    4               /* LINKED and on reclaim q */
359 #define QH_STATE_COMPLETING     5               /* don't touch token.HALT */
360
361         /* periodic schedule info */
362         u8                      usecs;          /* intr bandwidth */
363         u8                      gap_uf;         /* uframes split/csplit gap */
364         u8                      c_usecs;        /* ... split completion bw */
365         u16                     tt_usecs;       /* tt downstream bandwidth */
366         unsigned short          period;         /* polling interval */
367         unsigned short          start;          /* where polling starts */
368 #define NO_FRAME ((unsigned short)~0)                   /* pick new start */
369         struct usb_device       *dev;           /* access to TT */
370 } __attribute__ ((aligned (32)));
371
372 /*-------------------------------------------------------------------------*/
373
374 /* description of one iso transaction (up to 3 KB data if highspeed) */
375 struct ehci_iso_packet {
376         /* These will be copied to iTD when scheduling */
377         u64                     bufp;           /* itd->hw_bufp{,_hi}[pg] |= */
378         __hc32                  transaction;    /* itd->hw_transaction[i] |= */
379         u8                      cross;          /* buf crosses pages */
380         /* for full speed OUT splits */
381         u32                     buf1;
382 };
383
384 /* temporary schedule data for packets from iso urbs (both speeds)
385  * each packet is one logical usb transaction to the device (not TT),
386  * beginning at stream->next_uframe
387  */
388 struct ehci_iso_sched {
389         struct list_head        td_list;
390         unsigned                span;
391         struct ehci_iso_packet  packet [0];
392 };
393
394 /*
395  * ehci_iso_stream - groups all (s)itds for this endpoint.
396  * acts like a qh would, if EHCI had them for ISO.
397  */
398 struct ehci_iso_stream {
399         /* first two fields match QH, but info1 == 0 */
400         __hc32                  hw_next;
401         __hc32                  hw_info1;
402
403         u32                     refcount;
404         u8                      bEndpointAddress;
405         u8                      highspeed;
406         u16                     depth;          /* depth in uframes */
407         struct list_head        td_list;        /* queued itds/sitds */
408         struct list_head        free_list;      /* list of unused itds/sitds */
409         struct usb_device       *udev;
410         struct usb_host_endpoint *ep;
411
412         /* output of (re)scheduling */
413         unsigned long           start;          /* jiffies */
414         unsigned long           rescheduled;
415         int                     next_uframe;
416         __hc32                  splits;
417
418         /* the rest is derived from the endpoint descriptor,
419          * trusting urb->interval == f(epdesc->bInterval) and
420          * including the extra info for hw_bufp[0..2]
421          */
422         u8                      usecs, c_usecs;
423         u16                     interval;
424         u16                     tt_usecs;
425         u16                     maxp;
426         u16                     raw_mask;
427         unsigned                bandwidth;
428
429         /* This is used to initialize iTD's hw_bufp fields */
430         __hc32                  buf0;
431         __hc32                  buf1;
432         __hc32                  buf2;
433
434         /* this is used to initialize sITD's tt info */
435         __hc32                  address;
436 };
437
438 /*-------------------------------------------------------------------------*/
439
440 /*
441  * EHCI Specification 0.95 Section 3.3
442  * Fig 3-4 "Isochronous Transaction Descriptor (iTD)"
443  *
444  * Schedule records for high speed iso xfers
445  */
446 struct ehci_itd {
447         /* first part defined by EHCI spec */
448         __hc32                  hw_next;           /* see EHCI 3.3.1 */
449         __hc32                  hw_transaction [8]; /* see EHCI 3.3.2 */
450 #define EHCI_ISOC_ACTIVE        (1<<31)        /* activate transfer this slot */
451 #define EHCI_ISOC_BUF_ERR       (1<<30)        /* Data buffer error */
452 #define EHCI_ISOC_BABBLE        (1<<29)        /* babble detected */
453 #define EHCI_ISOC_XACTERR       (1<<28)        /* XactErr - transaction error */
454 #define EHCI_ITD_LENGTH(tok)    (((tok)>>16) & 0x0fff)
455 #define EHCI_ITD_IOC            (1 << 15)       /* interrupt on complete */
456
457 #define ITD_ACTIVE(ehci)        cpu_to_hc32(ehci, EHCI_ISOC_ACTIVE)
458
459         __hc32                  hw_bufp [7];    /* see EHCI 3.3.3 */
460         __hc32                  hw_bufp_hi [7]; /* Appendix B */
461
462         /* the rest is HCD-private */
463         dma_addr_t              itd_dma;        /* for this itd */
464         union ehci_shadow       itd_next;       /* ptr to periodic q entry */
465
466         struct urb              *urb;
467         struct ehci_iso_stream  *stream;        /* endpoint's queue */
468         struct list_head        itd_list;       /* list of stream's itds */
469
470         /* any/all hw_transactions here may be used by that urb */
471         unsigned                frame;          /* where scheduled */
472         unsigned                pg;
473         unsigned                index[8];       /* in urb->iso_frame_desc */
474 } __attribute__ ((aligned (32)));
475
476 /*-------------------------------------------------------------------------*/
477
478 /*
479  * EHCI Specification 0.95 Section 3.4
480  * siTD, aka split-transaction isochronous Transfer Descriptor
481  *       ... describe full speed iso xfers through TT in hubs
482  * see Figure 3-5 "Split-transaction Isochronous Transaction Descriptor (siTD)
483  */
484 struct ehci_sitd {
485         /* first part defined by EHCI spec */
486         __hc32                  hw_next;
487 /* uses bit field macros above - see EHCI 0.95 Table 3-8 */
488         __hc32                  hw_fullspeed_ep;        /* EHCI table 3-9 */
489         __hc32                  hw_uframe;              /* EHCI table 3-10 */
490         __hc32                  hw_results;             /* EHCI table 3-11 */
491 #define SITD_IOC        (1 << 31)       /* interrupt on completion */
492 #define SITD_PAGE       (1 << 30)       /* buffer 0/1 */
493 #define SITD_LENGTH(x)  (0x3ff & ((x)>>16))
494 #define SITD_STS_ACTIVE (1 << 7)        /* HC may execute this */
495 #define SITD_STS_ERR    (1 << 6)        /* error from TT */
496 #define SITD_STS_DBE    (1 << 5)        /* data buffer error (in HC) */
497 #define SITD_STS_BABBLE (1 << 4)        /* device was babbling */
498 #define SITD_STS_XACT   (1 << 3)        /* illegal IN response */
499 #define SITD_STS_MMF    (1 << 2)        /* incomplete split transaction */
500 #define SITD_STS_STS    (1 << 1)        /* split transaction state */
501
502 #define SITD_ACTIVE(ehci)       cpu_to_hc32(ehci, SITD_STS_ACTIVE)
503
504         __hc32                  hw_buf [2];             /* EHCI table 3-12 */
505         __hc32                  hw_backpointer;         /* EHCI table 3-13 */
506         __hc32                  hw_buf_hi [2];          /* Appendix B */
507
508         /* the rest is HCD-private */
509         dma_addr_t              sitd_dma;
510         union ehci_shadow       sitd_next;      /* ptr to periodic q entry */
511
512         struct urb              *urb;
513         struct ehci_iso_stream  *stream;        /* endpoint's queue */
514         struct list_head        sitd_list;      /* list of stream's sitds */
515         unsigned                frame;
516         unsigned                index;
517 } __attribute__ ((aligned (32)));
518
519 /*-------------------------------------------------------------------------*/
520
521 /*
522  * EHCI Specification 0.96 Section 3.7
523  * Periodic Frame Span Traversal Node (FSTN)
524  *
525  * Manages split interrupt transactions (using TT) that span frame boundaries
526  * into uframes 0/1; see 4.12.2.2.  In those uframes, a "save place" FSTN
527  * makes the HC jump (back) to a QH to scan for fs/ls QH completions until
528  * it hits a "restore" FSTN; then it returns to finish other uframe 0/1 work.
529  */
530 struct ehci_fstn {
531         __hc32                  hw_next;        /* any periodic q entry */
532         __hc32                  hw_prev;        /* qh or EHCI_LIST_END */
533
534         /* the rest is HCD-private */
535         dma_addr_t              fstn_dma;
536         union ehci_shadow       fstn_next;      /* ptr to periodic q entry */
537 } __attribute__ ((aligned (32)));
538
539 /*-------------------------------------------------------------------------*/
540
541 #ifdef CONFIG_USB_EHCI_ROOT_HUB_TT
542
543 /*
544  * Some EHCI controllers have a Transaction Translator built into the
545  * root hub. This is a non-standard feature.  Each controller will need
546  * to add code to the following inline functions, and call them as
547  * needed (mostly in root hub code).
548  */
549
550 #define ehci_is_TDI(e)                  (ehci_to_hcd(e)->has_tt)
551
552 /* Returns the speed of a device attached to a port on the root hub. */
553 static inline unsigned int
554 ehci_port_speed(struct ehci_hcd *ehci, unsigned int portsc)
555 {
556         if (ehci_is_TDI(ehci)) {
557                 switch ((portsc>>26)&3) {
558                 case 0:
559                         return 0;
560                 case 1:
561                         return (1<<USB_PORT_FEAT_LOWSPEED);
562                 case 2:
563                 default:
564                         return (1<<USB_PORT_FEAT_HIGHSPEED);
565                 }
566         }
567         return (1<<USB_PORT_FEAT_HIGHSPEED);
568 }
569
570 #else
571
572 #define ehci_is_TDI(e)                  (0)
573
574 #define ehci_port_speed(ehci, portsc)   (1<<USB_PORT_FEAT_HIGHSPEED)
575 #endif
576
577 /*-------------------------------------------------------------------------*/
578
579 #ifdef CONFIG_PPC_83xx
580 /* Some Freescale processors have an erratum in which the TT
581  * port number in the queue head was 0..N-1 instead of 1..N.
582  */
583 #define ehci_has_fsl_portno_bug(e)              ((e)->has_fsl_port_bug)
584 #else
585 #define ehci_has_fsl_portno_bug(e)              (0)
586 #endif
587
588 /*
589  * While most USB host controllers implement their registers in
590  * little-endian format, a minority (celleb companion chip) implement
591  * them in big endian format.
592  *
593  * This attempts to support either format at compile time without a
594  * runtime penalty, or both formats with the additional overhead
595  * of checking a flag bit.
596  */
597
598 #ifdef CONFIG_USB_EHCI_BIG_ENDIAN_MMIO
599 #define ehci_big_endian_mmio(e)         ((e)->big_endian_mmio)
600 #else
601 #define ehci_big_endian_mmio(e)         0
602 #endif
603
604 /*
605  * Big-endian read/write functions are arch-specific.
606  * Other arches can be added if/when they're needed.
607  */
608 #if defined(CONFIG_ARM) && defined(CONFIG_ARCH_IXP4XX)
609 #define readl_be(addr)          __raw_readl((__force unsigned *)addr)
610 #define writel_be(val, addr)    __raw_writel(val, (__force unsigned *)addr)
611 #endif
612
613 static inline unsigned int ehci_readl(const struct ehci_hcd *ehci,
614                 __u32 __iomem * regs)
615 {
616 #ifdef CONFIG_USB_EHCI_BIG_ENDIAN_MMIO
617         return ehci_big_endian_mmio(ehci) ?
618                 readl_be(regs) :
619                 readl(regs);
620 #else
621         return readl(regs);
622 #endif
623 }
624
625 static inline void ehci_writel(const struct ehci_hcd *ehci,
626                 const unsigned int val, __u32 __iomem *regs)
627 {
628 #ifdef CONFIG_USB_EHCI_BIG_ENDIAN_MMIO
629         ehci_big_endian_mmio(ehci) ?
630                 writel_be(val, regs) :
631                 writel(val, regs);
632 #else
633         writel(val, regs);
634 #endif
635 }
636
637 /*-------------------------------------------------------------------------*/
638
639 /*
640  * The AMCC 440EPx not only implements its EHCI registers in big-endian
641  * format, but also its DMA data structures (descriptors).
642  *
643  * EHCI controllers accessed through PCI work normally (little-endian
644  * everywhere), so we won't bother supporting a BE-only mode for now.
645  */
646 #ifdef CONFIG_USB_EHCI_BIG_ENDIAN_DESC
647 #define ehci_big_endian_desc(e)         ((e)->big_endian_desc)
648
649 /* cpu to ehci */
650 static inline __hc32 cpu_to_hc32 (const struct ehci_hcd *ehci, const u32 x)
651 {
652         return ehci_big_endian_desc(ehci)
653                 ? (__force __hc32)cpu_to_be32(x)
654                 : (__force __hc32)cpu_to_le32(x);
655 }
656
657 /* ehci to cpu */
658 static inline u32 hc32_to_cpu (const struct ehci_hcd *ehci, const __hc32 x)
659 {
660         return ehci_big_endian_desc(ehci)
661                 ? be32_to_cpu((__force __be32)x)
662                 : le32_to_cpu((__force __le32)x);
663 }
664
665 static inline u32 hc32_to_cpup (const struct ehci_hcd *ehci, const __hc32 *x)
666 {
667         return ehci_big_endian_desc(ehci)
668                 ? be32_to_cpup((__force __be32 *)x)
669                 : le32_to_cpup((__force __le32 *)x);
670 }
671
672 #else
673
674 /* cpu to ehci */
675 static inline __hc32 cpu_to_hc32 (const struct ehci_hcd *ehci, const u32 x)
676 {
677         return cpu_to_le32(x);
678 }
679
680 /* ehci to cpu */
681 static inline u32 hc32_to_cpu (const struct ehci_hcd *ehci, const __hc32 x)
682 {
683         return le32_to_cpu(x);
684 }
685
686 static inline u32 hc32_to_cpup (const struct ehci_hcd *ehci, const __hc32 *x)
687 {
688         return le32_to_cpup(x);
689 }
690
691 #endif
692
693 /*-------------------------------------------------------------------------*/
694
695 #ifndef DEBUG
696 #define STUB_DEBUG_FILES
697 #endif  /* DEBUG */
698
699 /*-------------------------------------------------------------------------*/
700
701 #endif /* __LINUX_EHCI_HCD_H */