drivers/staging/winbond/localpara.h

   1 #ifndef __WINBOND_LOCALPARA_H
   2 #define __WINBOND_LOCALPARA_H
   3
   4 //=============================================================
   5 // LocalPara.h -
   6 //=============================================================
   7
   8 #include "mac_structures.h"
   9
  10 //Define the local ability
  11
  12 #define LOCAL_DEFAULT_BEACON_PERIOD                     100             //ms
  13 #define LOCAL_DEFAULT_ATIM_WINDOW                       0
  14 #define LOCAL_DEFAULT_ERP_CAPABILITY            0x0431  //0x0001:       ESS
  15                                                                                                         //0x0010:       Privacy
  16                                                                                                         //0x0020:       short preamble
  17                                                                                                         //0x0400:       short slot time
  18 #define LOCAL_DEFAULT_LISTEN_INTERVAL           5
  19
  20 //#define LOCAL_DEFAULT_24_CHANNEL_NUM          11              // channel 1..11
  21 #define LOCAL_DEFAULT_24_CHANNEL_NUM            13              // channel 1..13
  22 #define LOCAL_DEFAULT_5_CHANNEL_NUM                     8               // channel 36..64
  23
  24 #define LOCAL_USA_24_CHANNEL_NUM                        11
  25 #define LOCAL_USA_5_CHANNEL_NUM                         12
  26 #define LOCAL_EUROPE_24_CHANNEL_NUM                     13
  27 #define LOCAL_EUROPE_5_CHANNEL_NUM                      19
  28 #define LOCAL_JAPAN_24_CHANNEL_NUM                      14
  29 #define LOCAL_JAPAN_5_CHANNEL_NUM                       11
  30 #define LOCAL_UNKNOWN_24_CHANNEL_NUM            14
  31 #define LOCAL_UNKNOWN_5_CHANNEL_NUM                     34      //not include 165
  32
  33
  34 #define psLOCAL                 (&(adapter->sLocalPara))
  35
  36 #define MODE_802_11_BG                  0
  37 #define MODE_802_11_A                   1
  38 #define MODE_802_11_ABG                 2
  39 #define MODE_802_11_BG_IBSS             3
  40 #define MODE_802_11_B                   4
  41 #define MODE_AUTO                               255
  42
  43 #define BAND_TYPE_DSSS                  0
  44 #define BAND_TYPE_OFDM_24               1
  45 #define BAND_TYPE_OFDM_5                2
  46
  47 //refer Bitmap2RateValue table
  48 #define LOCAL_ALL_SUPPORTED_RATES_BITMAP                0x130c1a66      //the bitmap value of all the H/W supported rates
  49                                                                                                                         //1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54
  50 #define LOCAL_OFDM_SUPPORTED_RATES_BITMAP               0x130c1240      //the bitmap value of all the H/W supported rates
  51                                                                                                                         //except to non-OFDM rates
  52                                                                                                                         //6, 9, 12, 18, 24, 36, 48, 54
  53
  54 #define LOCAL_11B_SUPPORTED_RATE_BITMAP                 0x826
  55 #define LOCAL_11B_BASIC_RATE_BITMAP                             0x826
  56 #define LOCAL_11B_OPERATION_RATE_BITMAP                 0x826
  57 #define LOCAL_11G_BASIC_RATE_BITMAP                             0x826           //1, 2, 5.5, 11
  58 #define LOCAL_11G_OPERATION_RATE_BITMAP                 0x130c1240      //6, 9, 12, 18, 24, 36, 48, 54
  59 #define LOCAL_11A_BASIC_RATE_BITMAP                             0x01001040      //6, 12, 24
  60 #define LOCAL_11A_OPERATION_RATE_BITMAP                 0x120c0200      //9, 18, 36, 48, 54
  61
  62
  63
  64 #define PWR_ACTIVE              0
  65 #define PWR_SAVE                1
  66 #define PWR_TX_IDLE_CYCLE                       6
  67
  68 //bPreambleMode and bSlotTimeMode
  69 #define AUTO_MODE                       0
  70 #define LONG_MODE                       1
  71
  72 //Region definition
  73 #define REGION_AUTO                     0xff
  74 #define REGION_UNKNOWN          0
  75 #define REGION_EUROPE           1       //ETSI
  76 #define REGION_JAPAN            2       //MKK
  77 #define REGION_USA                      3       //FCC
  78 #define REGION_FRANCE           4       //FRANCE
  79 #define REGION_SPAIN            5       //SPAIN
  80 #define REGION_ISRAEL           6       //ISRAEL
  81 //#define REGION_CANADA         7       //IC
  82
  83 #define MAX_BSS_DESCRIPT_ELEMENT                32
  84 #define MAX_PMKID_CandidateList         16
  85
  86 //High byte : Event number,  low byte : reason
  87 //Event definition
  88 //-- SME/MLME event
  89 #define EVENT_RCV_DEAUTH                                        0x0100
  90 #define EVENT_JOIN_FAIL                                         0x0200
  91 #define EVENT_AUTH_FAIL                                         0x0300
  92 #define EVENT_ASSOC_FAIL                                        0x0400
  93 #define EVENT_LOST_SIGNAL                                       0x0500
  94 #define EVENT_BSS_DESCRIPT_LACK                         0x0600
  95 #define EVENT_COUNTERMEASURE                            0x0700
  96 #define EVENT_JOIN_FILTER                                       0x0800
  97 //-- TX/RX event
  98 #define EVENT_RX_BUFF_UNAVAILABLE                       0x4100
  99
 100 #define EVENT_CONNECT                                           0x8100
 101 #define EVENT_DISCONNECT                                        0x8200
 102 #define EVENT_SCAN_REQ                                          0x8300
 103
 104 //Reason of Event
 105 #define EVENT_REASON_FILTER_BASIC_RATE          0x0001
 106 #define EVENT_REASON_FILTER_PRIVACY                     0x0002
 107 #define EVENT_REASON_FILTER_AUTH_MODE           0x0003
 108 #define EVENT_REASON_TIMEOUT                            0x00ff
 109
 110 // 20061108 WPS IE buffer
 111 #define MAX_IE_APPEND_SIZE                                      256 + 4 // Due to [E id][Length][OUI][Data] may 257 bytes
 112
 113 typedef struct _EVENTLOG
 114 {
 115         u16             Count;                  //Total count from start
 116         u16             index;                  //Buffer index, 0 ~ 63
 117         u32             EventValue[64]; //BYTE 3~2 : count, BYTE 1 : Event, BYTE 0 : reason
 118 } Event_Log, *pEvent_Log;
 119
 120 typedef struct _ChanInfo
 121 {
 122         u8              band;
 123         u8              ChanNo;
 124 } ChanInfo, *pChanInfo;
 125
 126 typedef struct _CHAN_LIST
 127 {
 128         u16                             Count;
 129         ChanInfo                Channel[50]; // 100B
 130 } CHAN_LIST, *psCHAN_LIST;
 131
 132 typedef struct _RadioOff
 133 {
 134         u8                      boHwRadioOff;
 135         u8                      boSwRadioOff;
 136 } RadioOff, *psRadioOff;
 137
 138 //===========================================================================
 139 typedef struct LOCAL_PARA
 140 {
 141         u8                      PermanentAddress[ MAC_ADDR_LENGTH + 2 ];        // read from EPROM, manufacture set for each NetCard
 142     u8                  ThisMacAddress[ MAC_ADDR_LENGTH + 2 ];                  // the driver will use actually.
 143
 144         u32                     MTUsize;                                // Ind to Uplayer, Max transmission unit size
 145
 146         u8                      region_INF;     //region setting from INF
 147         u8                      region;         //real region setting of the device
 148         u8                      Reserved_1[2];
 149
 150     //// power-save variables
 151     u8                          iPowerSaveMode;     // 0 indicates it is on, 1 indicates it is off
 152         u8                      ShutDowned;
 153         u8                      ATIMmode;
 154         u8                      ExcludeUnencrypted;
 155
 156         u16                     CheckCountForPS;        //Unit ime count for the decision to enter PS mode
 157         u8                      boHasTxActivity;        //tx activity has occurred
 158         u8                      boMacPsValid;           //Power save mode obtained from H/W is valid or not
 159
 160         //// Rate
 161         u8                      TxRateMode;                             // Initial, input from Registry, may be updated by GUI
 162                                                                                         //Tx Rate Mode: auto(DTO on), max, 1M, 2M, ..
 163         u8                      CurrentTxRate;                  // The current Tx rate
 164         u8                      CurrentTxRateForMng;    // The current Tx rate for management frames
 165                                                                                 // It will be decided before connection succeeds.
 166         u8                      CurrentTxFallbackRate;
 167
 168         //for Rate handler
 169         u8                      BRateSet[32];                   //basic rate set
 170         u8                      SRateSet[32];                   //support rate set
 171
 172         u8                      NumOfBRate;
 173         u8                      NumOfSRate;
 174         u8                      NumOfDsssRateInSRate;   //number of DSSS rates in supported rate set
 175         u8                      reserved1;
 176
 177         u32                     dwBasicRateBitmap;              //bit map of basic rates
 178         u32                     dwSupportRateBitmap;    //bit map of all support rates including
 179                                                                                 //basic and operational rates
 180
 181         ////For SME/MLME handler
 182         u16                     wOldSTAindex;                   // valid when boHandover=TRUE, store old connected STA index
 183         u16                     wConnectedSTAindex;             // Index of peerly connected AP or IBSS in
 184                                                                                 // the descriptionset.
 185     u16                 Association_ID;         // The Association ID in the (Re)Association
 186                                         // Response frame.
 187     u16                 ListenInterval;         // The listen interval when SME invoking MLME_
 188                                         // (Re)Associate_Request().
 189
 190         RadioOff                RadioOffStatus;
 191         u8                      Reserved0[2];
 192
 193         u8                      boMsRadioOff;                   // Ndis demands to be true when set Disassoc. OID and be false when set SSID OID.
 194         u8                      boAntennaDiversity;             //TRUE/ON or FALSE/OFF
 195         u8                      bAntennaNo;                             //which antenna
 196         u8                      bConnectFlag;                   //the connect status flag for roaming task
 197
 198         u8                      RoamStatus;
 199         u8                      reserved7[3];
 200
 201         ChanInfo        CurrentChan;                    //Current channel no. and channel band. It may be changed by scanning.
 202         u8                      boHandover;                             // Roaming, Hnadover to other AP.
 203         u8                      boCCAbusy;
 204
 205         u16                     CWMax;                                  // It may not be the real value that H/W used
 206         u8                      CWMin;                                  // 255: set according to 802.11 spec.
 207         u8                      reserved2;
 208
 209         //11G:
 210         u8                      bMacOperationMode;              // operation in 802.11b or 802.11g
 211         u8                      bSlotTimeMode;                  //AUTO, s32
 212         u8                      bPreambleMode;                  //AUTO, s32
 213         u8                      boNonERPpresent;
 214
 215         u8                      boProtectMechanism;     // H/W will take the necessary action based on this variable
 216         u8                      boShortPreamble;        // H/W will take the necessary action based on this variable
 217         u8                      boShortSlotTime;        // H/W will take the necessary action based on this variable
 218         u8                      reserved_3;
 219
 220         u32             RSN_IE_Bitmap;          //added by WS
 221         u32                     RSN_OUI_Type;           //added by WS
 222
 223         //For the BSSID
 224         u8                      HwBssid[MAC_ADDR_LENGTH + 2];
 225         u32                     HwBssidValid;
 226
 227         //For scan list
 228         u8                      BssListCount;                                                   //Total count of valid descriptor indexes
 229         u8                      boReceiveUncorrectInfo; //important settings in beacon/probe resp. have been changed
 230         u8                      NoOfJoinerInIbss;
 231         u8                      reserved_4;
 232
 233         u8                      BssListIndex[ (MAX_BSS_DESCRIPT_ELEMENT+3) & ~0x03 ];   //Store the valid descriptor indexes obtained from scannings
 234         u8                      JoinerInIbss[ (MAX_BSS_DESCRIPT_ELEMENT+3) & ~0x03 ];   //save the BssDescriptor index in this
 235                                                                                                                 //IBSS. The index 0 is local descriptor
 236                                                                                                                 //(psLOCAL->wConnectedSTAindex).
 237                                                                                                                 //If CONNECTED : NoOfJoinerInIbss >=2
 238                                                                                                                 //              else   : NoOfJoinerInIbss <=1
 239
 240         //// General Statistics, count at Rx_handler or Tx_callback interrupt handler
 241     u64         GS_XMIT_OK;                             // Good Frames Transmitted
 242     u64         GS_RCV_OK;                              // Good Frames Received
 243         u32             GS_RCV_ERROR;                   // Frames received with crc error
 244         u32             GS_XMIT_ERROR;                  // Bad Frames Transmitted
 245         u32             GS_RCV_NO_BUFFER;               // Receive Buffer underrun
 246         u32             GS_XMIT_ONE_COLLISION;  // one collision
 247         u32             GS_XMIT_MORE_COLLISIONS;// more collisions
 248
 249     //================================================================
 250     // Statistics (no matter whether it had done successfully) -wkchen
 251     //================================================================
 252     u32                 _NumRxMSDU;
 253     u32                 _NumTxMSDU;
 254     u32                 _dot11WEPExcludedCount;
 255     u32                 _dot11WEPUndecryptableCount;
 256     u32                 _dot11FrameDuplicateCount;
 257
 258         ChanInfo        IbssChanSetting;        // 2B. Start IBSS Channel setting by registry or WWU.
 259         u8              reserved_5[2];          //It may not be used after considering RF type,
 260                                                                         //region and modulation type.
 261
 262         CHAN_LIST       sSupportChanList;       // 86B. It will be obtained according to RF type and region
 263         u8              reserved_6[2];          //two variables are for wep key error detection added by ws 02/02/04
 264
 265     u32       bWepKeyError;
 266     u32         bToSelfPacketReceived;
 267     u32         WepKeyDetectTimerCount;
 268
 269         Event_Log       EventLog;
 270
 271         u16             SignalLostTh;
 272         u16             SignalRoamTh;
 273
 274         // 20061108 WPS IE Append
 275         u8              IE_Append_data[MAX_IE_APPEND_SIZE];
 276         u16             IE_Append_size;
 277         u16             reserved_7;
 278
 279 } WB_LOCALDESCRIPT, *PWB_LOCALDESCRIPT;
 280
 281 #endif