drivers/staging/winbond/localpara.h

   1 //=============================================================
   2 // LocalPara.h -
   3 //=============================================================
   4 //Define the local ability
   5
   6 #define LOCAL_DEFAULT_BEACON_PERIOD                     100             //ms
   7 #define LOCAL_DEFAULT_ATIM_WINDOW                       0
   8 #define LOCAL_DEFAULT_ERP_CAPABILITY            0x0431  //0x0001:       ESS
   9                                                                                                         //0x0010:       Privacy
  10                                                                                                         //0x0020:       short preamble
  11                                                                                                         //0x0400:       short slot time
  12 #define LOCAL_DEFAULT_LISTEN_INTERVAL           5
  13
  14 //#define LOCAL_DEFAULT_24_CHANNEL_NUM          11              // channel 1..11
  15 #define LOCAL_DEFAULT_24_CHANNEL_NUM            13              // channel 1..13
  16 #define LOCAL_DEFAULT_5_CHANNEL_NUM                     8               // channel 36..64
  17
  18 #define LOCAL_USA_24_CHANNEL_NUM                        11
  19 #define LOCAL_USA_5_CHANNEL_NUM                         12
  20 #define LOCAL_EUROPE_24_CHANNEL_NUM                     13
  21 #define LOCAL_EUROPE_5_CHANNEL_NUM                      19
  22 #define LOCAL_JAPAN_24_CHANNEL_NUM                      14
  23 #define LOCAL_JAPAN_5_CHANNEL_NUM                       11
  24 #define LOCAL_UNKNOWN_24_CHANNEL_NUM            14
  25 #define LOCAL_UNKNOWN_5_CHANNEL_NUM                     34      //not include 165
  26
  27
  28 #define psLOCAL                 (&(Adapter->sLocalPara))
  29
  30 #define MODE_802_11_BG                  0
  31 #define MODE_802_11_A                   1
  32 #define MODE_802_11_ABG                 2
  33 #define MODE_802_11_BG_IBSS             3
  34 #define MODE_802_11_B                   4
  35 #define MODE_AUTO                               255
  36
  37 #define BAND_TYPE_DSSS                  0
  38 #define BAND_TYPE_OFDM_24               1
  39 #define BAND_TYPE_OFDM_5                2
  40
  41 //refer Bitmap2RateValue table
  42 #define LOCAL_ALL_SUPPORTED_RATES_BITMAP                0x130c1a66      //the bitmap value of all the H/W supported rates
  43                                                                                                                         //1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54
  44 #define LOCAL_OFDM_SUPPORTED_RATES_BITMAP               0x130c1240      //the bitmap value of all the H/W supported rates
  45                                                                                                                         //except to non-OFDM rates
  46                                                                                                                         //6, 9, 12, 18, 24, 36, 48, 54
  47
  48 #define LOCAL_11B_SUPPORTED_RATE_BITMAP                 0x826
  49 #define LOCAL_11B_BASIC_RATE_BITMAP                             0x826
  50 #define LOCAL_11B_OPERATION_RATE_BITMAP                 0x826
  51 #define LOCAL_11G_BASIC_RATE_BITMAP                             0x826           //1, 2, 5.5, 11
  52 #define LOCAL_11G_OPERATION_RATE_BITMAP                 0x130c1240      //6, 9, 12, 18, 24, 36, 48, 54
  53 #define LOCAL_11A_BASIC_RATE_BITMAP                             0x01001040      //6, 12, 24
  54 #define LOCAL_11A_OPERATION_RATE_BITMAP                 0x120c0200      //9, 18, 36, 48, 54
  55
  56
  57
  58 #define PWR_ACTIVE              0
  59 #define PWR_SAVE                1
  60 #define PWR_TX_IDLE_CYCLE                       6
  61
  62 //bPreambleMode and bSlotTimeMode
  63 #define AUTO_MODE                       0
  64 #define LONG_MODE                       1
  65
  66 //Region definition
  67 #define REGION_AUTO                     0xff
  68 #define REGION_UNKNOWN          0
  69 #define REGION_EUROPE           1       //ETSI
  70 #define REGION_JAPAN            2       //MKK
  71 #define REGION_USA                      3       //FCC
  72 #define REGION_FRANCE           4       //FRANCE
  73 #define REGION_SPAIN            5       //SPAIN
  74 #define REGION_ISRAEL           6       //ISRAEL
  75 //#define REGION_CANADA         7       //IC
  76
  77 #define MAX_BSS_DESCRIPT_ELEMENT                32
  78 #define MAX_PMKID_CandidateList         16
  79
  80 //High byte : Event number,  low byte : reason
  81 //Event definition
  82 //-- SME/MLME event
  83 #define EVENT_RCV_DEAUTH                                        0x0100
  84 #define EVENT_JOIN_FAIL                                         0x0200
  85 #define EVENT_AUTH_FAIL                                         0x0300
  86 #define EVENT_ASSOC_FAIL                                        0x0400
  87 #define EVENT_LOST_SIGNAL                                       0x0500
  88 #define EVENT_BSS_DESCRIPT_LACK                         0x0600
  89 #define EVENT_COUNTERMEASURE                            0x0700
  90 #define EVENT_JOIN_FILTER                                       0x0800
  91 //-- TX/RX event
  92 #define EVENT_RX_BUFF_UNAVAILABLE                       0x4100
  93
  94 #define EVENT_CONNECT                                           0x8100
  95 #define EVENT_DISCONNECT                                        0x8200
  96 #define EVENT_SCAN_REQ                                          0x8300
  97
  98 //Reason of Event
  99 #define EVENT_REASON_FILTER_BASIC_RATE          0x0001
 100 #define EVENT_REASON_FILTER_PRIVACY                     0x0002
 101 #define EVENT_REASON_FILTER_AUTH_MODE           0x0003
 102 #define EVENT_REASON_TIMEOUT                            0x00ff
 103
 104 // 20061108 WPS IE buffer
 105 #define MAX_IE_APPEND_SIZE                                      256 + 4 // Due to [E id][Length][OUI][Data] may 257 bytes
 106
 107 typedef struct _EVENTLOG
 108 {
 109         u16             Count;                  //Total count from start
 110         u16             index;                  //Buffer index, 0 ~ 63
 111         u32             EventValue[64]; //BYTE 3~2 : count, BYTE 1 : Event, BYTE 0 : reason
 112 } Event_Log, *pEvent_Log;
 113
 114 typedef struct _ChanInfo
 115 {
 116         u8              band;
 117         u8              ChanNo;
 118 } ChanInfo, *pChanInfo;
 119
 120 typedef struct _CHAN_LIST
 121 {
 122         u16                             Count;
 123         ChanInfo                Channel[50]; // 100B
 124 } CHAN_LIST, *psCHAN_LIST;
 125
 126 typedef struct _RadioOff
 127 {
 128         u8                      boHwRadioOff;
 129         u8                      boSwRadioOff;
 130 } RadioOff, *psRadioOff;
 131
 132 //===========================================================================
 133 typedef struct LOCAL_PARA
 134 {
 135         u8                      PermanentAddress[ MAC_ADDR_LENGTH + 2 ];        // read from EPROM, manufacture set for each NetCard
 136     u8                  ThisMacAddress[ MAC_ADDR_LENGTH + 2 ];                  // the driver will use actually.
 137
 138         u32                     MTUsize;                                // Ind to Uplayer, Max transmission unit size
 139
 140         u8                      region_INF;     //region setting from INF
 141         u8                      region;         //real region setting of the device
 142         u8                      Reserved_1[2];
 143
 144     //// power-save variables
 145     u8                          iPowerSaveMode;     // 0 indicates it is on, 1 indicates it is off
 146         u8                      ShutDowned;
 147         u8                      ATIMmode;
 148         u8                      ExcludeUnencrypted;
 149
 150         u16                     CheckCountForPS;        //Unit ime count for the decision to enter PS mode
 151         u8                      boHasTxActivity;        //tx activity has occurred
 152         u8                      boMacPsValid;           //Power save mode obtained from H/W is valid or not
 153
 154         //// Rate
 155         u8                      TxRateMode;                             // Initial, input from Registry, may be updated by GUI
 156                                                                                         //Tx Rate Mode: auto(DTO on), max, 1M, 2M, ..
 157         u8                      CurrentTxRate;                  // The current Tx rate
 158         u8                      CurrentTxRateForMng;    // The current Tx rate for management frames
 159                                                                                 // It will be decided before connection succeeds.
 160         u8                      CurrentTxFallbackRate;
 161
 162         //for Rate handler
 163         u8                      BRateSet[32];                   //basic rate set
 164         u8                      SRateSet[32];                   //support rate set
 165
 166         u8                      NumOfBRate;
 167         u8                      NumOfSRate;
 168         u8                      NumOfDsssRateInSRate;   //number of DSSS rates in supported rate set
 169         u8                      reserved1;
 170
 171         u32                     dwBasicRateBitmap;              //bit map of basic rates
 172         u32                     dwSupportRateBitmap;    //bit map of all support rates including
 173                                                                                 //basic and operational rates
 174
 175         ////For SME/MLME handler
 176         u16                     wOldSTAindex;                   // valid when boHandover=TRUE, store old connected STA index
 177         u16                     wConnectedSTAindex;             // Index of peerly connected AP or IBSS in
 178                                                                                 // the descriptionset.
 179     u16                 Association_ID;         // The Association ID in the (Re)Association
 180                                         // Response frame.
 181     u16                 ListenInterval;         // The listen interval when SME invoking MLME_
 182                                         // (Re)Associate_Request().
 183
 184         RadioOff                RadioOffStatus;
 185         u8                      Reserved0[2];
 186
 187         u8                      boMsRadioOff;                   // Ndis demands to be true when set Disassoc. OID and be false when set SSID OID.
 188         u8                      boAntennaDiversity;             //TRUE/ON or FALSE/OFF
 189         u8                      bAntennaNo;                             //which antenna
 190         u8                      bConnectFlag;                   //the connect status flag for roaming task
 191
 192         u8                      RoamStatus;
 193         u8                      reserved7[3];
 194
 195         ChanInfo        CurrentChan;                    //Current channel no. and channel band. It may be changed by scanning.
 196         u8                      boHandover;                             // Roaming, Hnadover to other AP.
 197         u8                      boCCAbusy;
 198
 199         u16                     CWMax;                                  // It may not be the real value that H/W used
 200         u8                      CWMin;                                  // 255: set according to 802.11 spec.
 201         u8                      reserved2;
 202
 203         //11G:
 204         u8                      bMacOperationMode;              // operation in 802.11b or 802.11g
 205         u8                      bSlotTimeMode;                  //AUTO, s32
 206         u8                      bPreambleMode;                  //AUTO, s32
 207         u8                      boNonERPpresent;
 208
 209         u8                      boProtectMechanism;     // H/W will take the necessary action based on this variable
 210         u8                      boShortPreamble;        // H/W will take the necessary action based on this variable
 211         u8                      boShortSlotTime;        // H/W will take the necessary action based on this variable
 212         u8                      reserved_3;
 213
 214         u32             RSN_IE_Bitmap;          //added by WS
 215         u32                     RSN_OUI_Type;           //added by WS
 216
 217         //For the BSSID
 218         u8                      HwBssid[MAC_ADDR_LENGTH + 2];
 219         u32                     HwBssidValid;
 220
 221         //For scan list
 222         u8                      BssListCount;                                                   //Total count of valid descriptor indexes
 223         u8                      boReceiveUncorrectInfo; //important settings in beacon/probe resp. have been changed
 224         u8                      NoOfJoinerInIbss;
 225         u8                      reserved_4;
 226
 227         u8                      BssListIndex[ (MAX_BSS_DESCRIPT_ELEMENT+3) & ~0x03 ];   //Store the valid descriptor indexes obtained from scannings
 228         u8                      JoinerInIbss[ (MAX_BSS_DESCRIPT_ELEMENT+3) & ~0x03 ];   //save the BssDescriptor index in this
 229                                                                                                                 //IBSS. The index 0 is local descriptor
 230                                                                                                                 //(psLOCAL->wConnectedSTAindex).
 231                                                                                                                 //If CONNECTED : NoOfJoinerInIbss >=2
 232                                                                                                                 //              else   : NoOfJoinerInIbss <=1
 233
 234         //// General Statistics, count at Rx_handler or Tx_callback interrupt handler
 235     u64         GS_XMIT_OK;                             // Good Frames Transmitted
 236     u64         GS_RCV_OK;                              // Good Frames Received
 237         u32             GS_RCV_ERROR;                   // Frames received with crc error
 238         u32             GS_XMIT_ERROR;                  // Bad Frames Transmitted
 239         u32             GS_RCV_NO_BUFFER;               // Receive Buffer underrun
 240         u32             GS_XMIT_ONE_COLLISION;  // one collision
 241         u32             GS_XMIT_MORE_COLLISIONS;// more collisions
 242
 243     //================================================================
 244     // Statistics (no matter whether it had done successfully) -wkchen
 245     //================================================================
 246     u32                 _NumRxMSDU;
 247     u32                 _NumTxMSDU;
 248     u32                 _dot11WEPExcludedCount;
 249     u32                 _dot11WEPUndecryptableCount;
 250     u32                 _dot11FrameDuplicateCount;
 251
 252         ChanInfo        IbssChanSetting;        // 2B. Start IBSS Channel setting by registry or WWU.
 253         u8              reserved_5[2];          //It may not be used after considering RF type,
 254                                                                         //region and modulation type.
 255
 256         CHAN_LIST       sSupportChanList;       // 86B. It will be obtained according to RF type and region
 257         u8              reserved_6[2];          //two variables are for wep key error detection added by ws 02/02/04
 258
 259     u32       bWepKeyError;
 260     u32         bToSelfPacketReceived;
 261     u32         WepKeyDetectTimerCount;
 262
 263         Event_Log       EventLog;
 264
 265         u16             SignalLostTh;
 266         u16             SignalRoamTh;
 267
 268         // 20061108 WPS IE Append
 269         u8              IE_Append_data[MAX_IE_APPEND_SIZE];
 270         u16             IE_Append_size;
 271         u16             reserved_7;
 272
 273 } WB_LOCALDESCRIPT, *PWB_LOCALDESCRIPT;
 274
 275