]> www.pilppa.org Git - linux-2.6-omap-h63xx.git/blob - drivers/staging/et131x/et131x_defs.h
Merge git://git.linux-nfs.org/projects/trondmy/nfs-2.6
[linux-2.6-omap-h63xx.git] / drivers / staging / et131x / et131x_defs.h
1 /*
2  * Agere Systems Inc.
3  * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs
4  *
5  * Copyright © 2005 Agere Systems Inc.
6  * All rights reserved.
7  *   http://www.agere.com
8  *
9  *------------------------------------------------------------------------------
10  *
11  * et131x_defs.h - Defines, structs, enums, prototypes, etc. to assist with OS
12  *                 compatibility
13  *
14  *------------------------------------------------------------------------------
15  *
16  * SOFTWARE LICENSE
17  *
18  * This software is provided subject to the following terms and conditions,
19  * which you should read carefully before using the software.  Using this
20  * software indicates your acceptance of these terms and conditions.  If you do
21  * not agree with these terms and conditions, do not use the software.
22  *
23  * Copyright © 2005 Agere Systems Inc.
24  * All rights reserved.
25  *
26  * Redistribution and use in source or binary forms, with or without
27  * modifications, are permitted provided that the following conditions are met:
28  *
29  * . Redistributions of source code must retain the above copyright notice, this
30  *    list of conditions and the following Disclaimer as comments in the code as
31  *    well as in the documentation and/or other materials provided with the
32  *    distribution.
33  *
34  * . Redistributions in binary form must reproduce the above copyright notice,
35  *    this list of conditions and the following Disclaimer in the documentation
36  *    and/or other materials provided with the distribution.
37  *
38  * . Neither the name of Agere Systems Inc. nor the names of the contributors
39  *    may be used to endorse or promote products derived from this software
40  *    without specific prior written permission.
41  *
42  * Disclaimer
43  *
44  * THIS SOFTWARE IS PROVIDED \93AS IS\94 AND ANY EXPRESS OR IMPLIED WARRANTIES,
45  * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF
46  * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  ANY
47  * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN
48  * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY
49  * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
50  * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
51  * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
52  * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT
53  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
54  * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
55  * DAMAGE.
56  *
57  */
58
59 #ifndef __ET131X_DEFS_H__
60 #define __ET131X_DEFS_H__
61
62 /* Packet and header sizes */
63 #define NIC_MIN_PACKET_SIZE     60
64 #define NIC_HEADER_SIZE         ETH_HLEN        /* 14 */
65
66 /* Multicast list size */
67 #define NIC_MAX_MCAST_LIST      128
68
69 /* Supported Filters */
70 #define ET131X_PACKET_TYPE_DIRECTED             0x0001
71 #define ET131X_PACKET_TYPE_MULTICAST            0x0002
72 #define ET131X_PACKET_TYPE_BROADCAST            0x0004
73 #define ET131X_PACKET_TYPE_PROMISCUOUS          0x0008
74 #define ET131X_PACKET_TYPE_ALL_MULTICAST        0x0010
75
76 /* Tx Timeout */
77 #define ET131X_TX_TIMEOUT       (1 * HZ)
78 #define NIC_SEND_HANG_THRESHOLD 0
79
80 /* MP_TCB flags */
81 #define fMP_DEST_MULTI                  0x00000001
82 #define fMP_DEST_BROAD                  0x00000002
83
84 /* MP_ADAPTER flags */
85 #define fMP_ADAPTER_RECV_LOOKASIDE      0x00000004
86 #define fMP_ADAPTER_INTERRUPT_IN_USE    0x00000008
87 #define fMP_ADAPTER_SECONDARY           0x00000010
88
89 /* MP_SHARED flags */
90 #define fMP_ADAPTER_SHUTDOWN            0x00100000
91 #define fMP_ADAPTER_LOWER_POWER         0x00200000
92
93 #define fMP_ADAPTER_NON_RECOVER_ERROR   0x00800000
94 #define fMP_ADAPTER_RESET_IN_PROGRESS   0x01000000
95 #define fMP_ADAPTER_NO_CABLE            0x02000000
96 #define fMP_ADAPTER_HARDWARE_ERROR      0x04000000
97 #define fMP_ADAPTER_REMOVE_IN_PROGRESS  0x08000000
98 #define fMP_ADAPTER_HALT_IN_PROGRESS    0x10000000
99 #define fMP_ADAPTER_LINK_DETECTION      0x20000000
100
101 #define fMP_ADAPTER_FAIL_SEND_MASK      0x3ff00000
102 #define fMP_ADAPTER_NOT_READY_MASK      0x3ff00000
103
104 /* Some offsets in PCI config space that are actually used. */
105 #define ET1310_PCI_PM_CAPABILITY        0x40
106 #define ET1310_PCI_PM_CSR               0x44
107 #define ET1310_PCI_MAX_PYLD             0x4C
108 #define ET1310_PCI_DEV_CTRL             0x50
109 #define ET1310_PCI_DEV_STAT             0x52
110 #define ET1310_NMI_DISABLE              0x61
111 #define ET1310_PCI_MAC_ADDRESS          0xA4
112 #define ET1310_PCI_EEPROM_STATUS        0xB2
113 #define ET1310_PCI_PHY_INDEX_REG        0xB4
114 #define ET1310_PCI_ACK_NACK             0xC0
115 #define ET1310_PCI_REPLAY               0xC2
116 #define ET1310_PCI_L0L1LATENCY          0xCF
117 #define ET1310_PCI_SEL_PHY_CTRL         0xE4
118 #define ET1310_PCI_ADVANCED_ERR         0x100
119
120 /* PCI Vendor/Product IDs */
121 #define ET131X_PCI_VENDOR_ID            0x11C1  // Agere Systems
122 #define ET131X_PCI_DEVICE_ID_GIG        0xED00  // ET1310 1000 Base-T
123 #define ET131X_PCI_DEVICE_ID_FAST       0xED01  // ET1310 100  Base-T
124
125 /* Define order of magnitude converter */
126 #define NANO_IN_A_MICRO 1000
127
128 #endif /* __ET131X_DEFS_H__ */