drivers/staging/benet/fwcmd_opcodes.h

   1 /*
   2  * Copyright (C) 2005 - 2008 ServerEngines
   3  * All rights reserved.
   4  *
   5  * This program is free software; you can redistribute it and/or
   6  * modify it under the terms of the GNU General Public License version 2
   7  * as published by the Free Software Foundation.  The full GNU General
   8  * Public License is included in this distribution in the file called COPYING.
   9  *
  10  * Contact Information:
  11  * linux-drivers@serverengines.com
  12  *
  13  * ServerEngines
  14  * 209 N. Fair Oaks Ave
  15  * Sunnyvale, CA 94085
  16  */
  17 /*
  18  * Autogenerated by srcgen version: 0127
  19  */
  20 #ifndef __fwcmd_opcodes_amap_h__
  21 #define __fwcmd_opcodes_amap_h__
  22
  23 /*
  24  * --- FWCMD_SUBSYSTEMS ---
  25  * The commands are grouped into the following subsystems. The subsystem
  26  * code along with the opcode uniquely identify a particular fwcmd.
  27  */
  28 #define FWCMD_SUBSYSTEM_RSVD  (0)       /* This subsystem is reserved. It is */
  29                                                   /* never used. */
  30 #define FWCMD_SUBSYSTEM_COMMON (1)      /* CMDs in this group are common to
  31                                         * all subsystems. See
  32                                         * COMMON_SUBSYSTEM_OPCODES for opcodes
  33                                         * and Common Host Configuration CMDs
  34                                         * for the FWCMD descriptions.
  35                                         */
  36 #define FWCMD_SUBSYSTEM_COMMON_ISCSI    (2) /* CMDs in this group are */
  37                                         /*
  38                                         * common to Initiator and Target. See
  39                                         * COMMON_ISCSI_SUBSYSTEM_OPCODES and
  40                                         * Common iSCSI Initiator and Target
  41                                         * CMDs for the command descriptions.
  42                                         */
  43 #define FWCMD_SUBSYSTEM_ETH             (3)     /* This subsystem is used to
  44                                                 execute  Ethernet commands.  */
  45
  46 #define FWCMD_SUBSYSTEM_TPM             (4)     /* This subsystem is used
  47                                                  to execute TPM  commands.  */
  48 #define FWCMD_SUBSYSTEM_PXE_UNDI        (5)     /* This subsystem is used
  49                                                 * to execute PXE
  50                                                 * and UNDI specific commands.
  51                                                 */
  52
  53 #define FWCMD_SUBSYSTEM_ISCSI_INI       (6)     /* This subsystem is used to
  54                                                 execute ISCSI Initiator
  55                                                 specific commands.
  56                                                 */
  57 #define FWCMD_SUBSYSTEM_ISCSI_TGT       (7)     /* This subsystem is used
  58                                                 to execute iSCSI Target
  59                                                 specific commands.between
  60                                                 PTL and ARM firmware.
  61                                                 */
  62 #define FWCMD_SUBSYSTEM_MILI_PTL        (8)     /* This subsystem is used to
  63                                                 execute iSCSI Target specific
  64                                                 commands.between MILI
  65                                                 and PTL.  */
  66 #define FWCMD_SUBSYSTEM_MILI_TMD        (9)     /* This subsystem is used to
  67                                                 execute iSCSI Target specific
  68                                                 commands between MILI
  69                                                 and TMD.  */
  70 #define FWCMD_SUBSYSTEM_PROXY           (11)    /* This subsystem is used
  71                                                 to execute proxied commands
  72                                                 within the host at the
  73                                                 explicit request of a
  74                                                 non priviledged domain.
  75                                                 This 'subsystem' is entirely
  76                                                 virtual from the controller
  77                                                 and firmware perspective as
  78                                                 it is implemented in host
  79                                                 drivers.
  80                                                 */
  81
  82 /*
  83  * --- COMMON_SUBSYSTEM_OPCODES ---
  84  * These opcodes are common to both networking and storage PCI
  85  * functions. They are used to reserve resources and configure
  86  * BladeEngine. These opcodes all use the FWCMD_SUBSYSTEM_COMMON
  87  * subsystem code.
  88  */
  89 #define OPCODE_COMMON_NTWK_MAC_QUERY    (1)
  90 #define SUBSYSTEM_COMMON_NTWK_MAC_QUERY (1)
  91 #define SUBSYSTEM_COMMON_NTWK_MAC_SET   (1)
  92 #define SUBSYSTEM_COMMON_NTWK_MULTICAST_SET (1)
  93 #define SUBSYSTEM_COMMON_NTWK_VLAN_CONFIG (1)
  94 #define SUBSYSTEM_COMMON_NTWK_LINK_STATUS_QUERY (1)
  95 #define SUBSYSTEM_COMMON_READ_FLASHROM  (1)
  96 #define SUBSYSTEM_COMMON_WRITE_FLASHROM (1)
  97 #define SUBSYSTEM_COMMON_QUERY_MAX_FWCMD_BUFFER_SIZE (1)
  98 #define SUBSYSTEM_COMMON_ADD_PAGE_TABLES (1)
  99 #define SUBSYSTEM_COMMON_REMOVE_PAGE_TABLES (1)
 100 #define SUBSYSTEM_COMMON_RING_DESTROY   (1)
 101 #define SUBSYSTEM_COMMON_CQ_CREATE      (1)
 102 #define SUBSYSTEM_COMMON_EQ_CREATE      (1)
 103 #define SUBSYSTEM_COMMON_ETH_RX_CREATE  (1)
 104 #define SUBSYSTEM_COMMON_ETH_TX_CREATE  (1)
 105 #define SUBSYSTEM_COMMON_ISCSI_DEFQ_CREATE (1)
 106 #define SUBSYSTEM_COMMON_ISCSI_WRBQ_CREATE (1)
 107 #define SUBSYSTEM_COMMON_MCC_CREATE     (1)
 108 #define SUBSYSTEM_COMMON_JELL_CONFIG    (1)
 109 #define SUBSYSTEM_COMMON_FORCE_FAILOVER (1)
 110 #define SUBSYSTEM_COMMON_ADD_TEMPLATE_HEADER_BUFFERS (1)
 111 #define SUBSYSTEM_COMMON_REMOVE_TEMPLATE_HEADER_BUFFERS (1)
 112 #define SUBSYSTEM_COMMON_POST_ZERO_BUFFER (1)
 113 #define SUBSYSTEM_COMMON_GET_QOS        (1)
 114 #define SUBSYSTEM_COMMON_SET_QOS        (1)
 115 #define SUBSYSTEM_COMMON_TCP_GET_STATISTICS (1)
 116 #define SUBSYSTEM_COMMON_SEEPROM_READ   (1)
 117 #define SUBSYSTEM_COMMON_TCP_STATE_QUERY (1)
 118 #define SUBSYSTEM_COMMON_GET_CNTL_ATTRIBUTES (1)
 119 #define SUBSYSTEM_COMMON_NOP            (1)
 120 #define SUBSYSTEM_COMMON_NTWK_RX_FILTER (1)
 121 #define SUBSYSTEM_COMMON_GET_FW_VERSION (1)
 122 #define SUBSYSTEM_COMMON_SET_FLOW_CONTROL (1)
 123 #define SUBSYSTEM_COMMON_GET_FLOW_CONTROL (1)
 124 #define SUBSYSTEM_COMMON_SET_TCP_PARAMETERS (1)
 125 #define SUBSYSTEM_COMMON_SET_FRAME_SIZE (1)
 126 #define SUBSYSTEM_COMMON_GET_FAT        (1)
 127 #define SUBSYSTEM_COMMON_MODIFY_EQ_DELAY (1)
 128 #define SUBSYSTEM_COMMON_FIRMWARE_CONFIG (1)
 129 #define SUBSYSTEM_COMMON_ENABLE_DISABLE_DOMAINS (1)
 130 #define SUBSYSTEM_COMMON_GET_DOMAIN_CONFIG (1)
 131 #define SUBSYSTEM_COMMON_SET_VLD_CONFIG (1)
 132 #define SUBSYSTEM_COMMON_GET_VLD_CONFIG (1)
 133 #define SUBSYSTEM_COMMON_GET_PORT_EQUALIZATION (1)
 134 #define SUBSYSTEM_COMMON_SET_PORT_EQUALIZATION (1)
 135 #define SUBSYSTEM_COMMON_RED_CONFIG     (1)
 136 #define OPCODE_COMMON_NTWK_MAC_SET      (2)
 137 #define OPCODE_COMMON_NTWK_MULTICAST_SET (3)
 138 #define OPCODE_COMMON_NTWK_VLAN_CONFIG  (4)
 139 #define OPCODE_COMMON_NTWK_LINK_STATUS_QUERY (5)
 140 #define OPCODE_COMMON_READ_FLASHROM     (6)
 141 #define OPCODE_COMMON_WRITE_FLASHROM    (7)
 142 #define OPCODE_COMMON_QUERY_MAX_FWCMD_BUFFER_SIZE (8)
 143 #define OPCODE_COMMON_ADD_PAGE_TABLES   (9)
 144 #define OPCODE_COMMON_REMOVE_PAGE_TABLES (10)
 145 #define OPCODE_COMMON_RING_DESTROY      (11)
 146 #define OPCODE_COMMON_CQ_CREATE         (12)
 147 #define OPCODE_COMMON_EQ_CREATE         (13)
 148 #define OPCODE_COMMON_ETH_RX_CREATE     (14)
 149 #define OPCODE_COMMON_ETH_TX_CREATE     (15)
 150 #define OPCODE_COMMON_NET_RESERVED0     (16)    /* Reserved */
 151 #define OPCODE_COMMON_NET_RESERVED1     (17)    /* Reserved */
 152 #define OPCODE_COMMON_NET_RESERVED2     (18)    /* Reserved */
 153 #define OPCODE_COMMON_ISCSI_DEFQ_CREATE (19)
 154 #define OPCODE_COMMON_ISCSI_WRBQ_CREATE (20)
 155 #define OPCODE_COMMON_MCC_CREATE        (21)
 156 #define OPCODE_COMMON_JELL_CONFIG       (22)
 157 #define OPCODE_COMMON_FORCE_FAILOVER    (23)
 158 #define OPCODE_COMMON_ADD_TEMPLATE_HEADER_BUFFERS (24)
 159 #define OPCODE_COMMON_REMOVE_TEMPLATE_HEADER_BUFFERS (25)
 160 #define OPCODE_COMMON_POST_ZERO_BUFFER  (26)
 161 #define OPCODE_COMMON_GET_QOS           (27)
 162 #define OPCODE_COMMON_SET_QOS           (28)
 163 #define OPCODE_COMMON_TCP_GET_STATISTICS (29)
 164 #define OPCODE_COMMON_SEEPROM_READ      (30)
 165 #define OPCODE_COMMON_TCP_STATE_QUERY   (31)
 166 #define OPCODE_COMMON_GET_CNTL_ATTRIBUTES (32)
 167 #define OPCODE_COMMON_NOP               (33)
 168 #define OPCODE_COMMON_NTWK_RX_FILTER    (34)
 169 #define OPCODE_COMMON_GET_FW_VERSION    (35)
 170 #define OPCODE_COMMON_SET_FLOW_CONTROL  (36)
 171 #define OPCODE_COMMON_GET_FLOW_CONTROL  (37)
 172 #define OPCODE_COMMON_SET_TCP_PARAMETERS (38)
 173 #define OPCODE_COMMON_SET_FRAME_SIZE    (39)
 174 #define OPCODE_COMMON_GET_FAT           (40)
 175 #define OPCODE_COMMON_MODIFY_EQ_DELAY   (41)
 176 #define OPCODE_COMMON_FIRMWARE_CONFIG   (42)
 177 #define OPCODE_COMMON_ENABLE_DISABLE_DOMAINS (43)
 178 #define OPCODE_COMMON_GET_DOMAIN_CONFIG (44)
 179 #define OPCODE_COMMON_SET_VLD_CONFIG    (45)
 180 #define OPCODE_COMMON_GET_VLD_CONFIG    (46)
 181 #define OPCODE_COMMON_GET_PORT_EQUALIZATION (47)
 182 #define OPCODE_COMMON_SET_PORT_EQUALIZATION (48)
 183 #define OPCODE_COMMON_RED_CONFIG        (49)
 184
 185
 186
 187 /*
 188  * --- ETH_SUBSYSTEM_OPCODES ---
 189  * These opcodes are used for configuring the Ethernet interfaces. These
 190  * opcodes all use the FWCMD_SUBSYSTEM_ETH subsystem code.
 191  */
 192 #define OPCODE_ETH_RSS_CONFIG           (1)
 193 #define OPCODE_ETH_ACPI_CONFIG          (2)
 194 #define SUBSYSTEM_ETH_RSS_CONFIG        (3)
 195 #define SUBSYSTEM_ETH_ACPI_CONFIG       (3)
 196 #define OPCODE_ETH_PROMISCUOUS          (3)
 197 #define SUBSYSTEM_ETH_PROMISCUOUS       (3)
 198 #define SUBSYSTEM_ETH_GET_STATISTICS    (3)
 199 #define SUBSYSTEM_ETH_GET_RX_FRAG_SIZE  (3)
 200 #define SUBSYSTEM_ETH_SET_RX_FRAG_SIZE  (3)
 201 #define OPCODE_ETH_GET_STATISTICS       (4)
 202 #define OPCODE_ETH_GET_RX_FRAG_SIZE     (5)
 203 #define OPCODE_ETH_SET_RX_FRAG_SIZE     (6)
 204
 205
 206
 207
 208
 209 /*
 210  * --- MCC_STATUS_CODE ---
 211  * These are the global status codes used by all subsystems
 212  */
 213 #define MCC_STATUS_SUCCESS              (0)     /* Indicates a successful
 214                                                 completion of  the command */
 215 #define MCC_STATUS_INSUFFICIENT_PRIVILEGES (1)  /* The client does not have
 216                                                 sufficient privileges to
 217                                                 execute the command */
 218 #define MCC_STATUS_INVALID_PARAMETER    (2)     /* A parameter in the command
 219                                                 was invalid. The extended
 220                                                 status contains the index
 221                                                 of the parameter */
 222 #define MCC_STATUS_INSUFFICIENT_RESOURCES (3)   /* There are insufficient
 223                                                 chip resources to execute
 224                                                 the command */
 225 #define MCC_STATUS_QUEUE_FLUSHING       (4)     /* The command is completing
 226                                                 because the queue was
 227                                                 getting flushed */
 228 #define MCC_STATUS_DMA_FAILED           (5)     /* The command is completing
 229                                                 with a DMA error */
 230
 231 /*
 232  * --- MGMT_ERROR_CODES ---
 233  * Error Codes returned in the status field of the FWCMD response header
 234  */
 235 #define MGMT_STATUS_SUCCESS             (0)     /* The FWCMD completed
 236                                                 without errors */
 237 #define MGMT_STATUS_FAILED              (1)     /* Error status in the Status
 238                                                 field of  the
 239                                                 struct FWCMD_RESPONSE_HEADER */
 240 #define MGMT_STATUS_ILLEGAL_REQUEST     (2)     /* Invalid FWCMD opcode */
 241 #define MGMT_STATUS_ILLEGAL_FIELD       (3)     /* Invalid parameter in
 242                                                 the FWCMD  payload */
 243
 244 #endif /* __fwcmd_opcodes_amap_h__ */