2 * QLogic Fibre Channel HBA Driver
3 * Copyright (c) 2003-2008 QLogic Corporation
5 * See LICENSE.qla2xxx for copyright and licensing details.
9 #include <linux/moduleparam.h>
10 #include <linux/vmalloc.h>
11 #include <linux/delay.h>
12 #include <linux/kthread.h>
13 #include <linux/mutex.h>
15 #include <scsi/scsi_tcq.h>
16 #include <scsi/scsicam.h>
17 #include <scsi/scsi_transport.h>
18 #include <scsi/scsi_transport_fc.h>
23 char qla2x00_version_str[40];
26 * SRB allocation cache
28 static struct kmem_cache *srb_cachep;
30 int ql2xlogintimeout = 20;
31 module_param(ql2xlogintimeout, int, S_IRUGO|S_IRUSR);
32 MODULE_PARM_DESC(ql2xlogintimeout,
33 "Login timeout value in seconds.");
35 int qlport_down_retry;
36 module_param(qlport_down_retry, int, S_IRUGO|S_IRUSR);
37 MODULE_PARM_DESC(qlport_down_retry,
38 "Maximum number of command retries to a port that returns "
39 "a PORT-DOWN status.");
41 int ql2xplogiabsentdevice;
42 module_param(ql2xplogiabsentdevice, int, S_IRUGO|S_IWUSR);
43 MODULE_PARM_DESC(ql2xplogiabsentdevice,
44 "Option to enable PLOGI to devices that are not present after "
45 "a Fabric scan. This is needed for several broken switches. "
46 "Default is 0 - no PLOGI. 1 - perfom PLOGI.");
48 int ql2xloginretrycount = 0;
49 module_param(ql2xloginretrycount, int, S_IRUGO|S_IRUSR);
50 MODULE_PARM_DESC(ql2xloginretrycount,
51 "Specify an alternate value for the NVRAM login retry count.");
53 int ql2xallocfwdump = 1;
54 module_param(ql2xallocfwdump, int, S_IRUGO|S_IRUSR);
55 MODULE_PARM_DESC(ql2xallocfwdump,
56 "Option to enable allocation of memory for a firmware dump "
57 "during HBA initialization. Memory allocation requirements "
58 "vary by ISP type. Default is 1 - allocate memory.");
60 int ql2xextended_error_logging;
61 module_param(ql2xextended_error_logging, int, S_IRUGO|S_IWUSR);
62 MODULE_PARM_DESC(ql2xextended_error_logging,
63 "Option to enable extended error logging, "
64 "Default is 0 - no logging. 1 - log errors.");
66 static void qla2x00_free_device(scsi_qla_host_t *);
68 static void qla2x00_config_dma_addressing(scsi_qla_host_t *ha);
71 module_param(ql2xfdmienable, int, S_IRUGO|S_IRUSR);
72 MODULE_PARM_DESC(ql2xfdmienable,
73 "Enables FDMI registratons "
74 "Default is 0 - no FDMI. 1 - perfom FDMI.");
76 #define MAX_Q_DEPTH 32
77 static int ql2xmaxqdepth = MAX_Q_DEPTH;
78 module_param(ql2xmaxqdepth, int, S_IRUGO|S_IWUSR);
79 MODULE_PARM_DESC(ql2xmaxqdepth,
80 "Maximum queue depth to report for target devices.");
82 int ql2xqfullrampup = 120;
83 module_param(ql2xqfullrampup, int, S_IRUGO|S_IWUSR);
84 MODULE_PARM_DESC(ql2xqfullrampup,
85 "Number of seconds to wait to begin to ramp-up the queue "
86 "depth for a device after a queue-full condition has been "
87 "detected. Default is 120 seconds.");
89 int ql2xiidmaenable=1;
90 module_param(ql2xiidmaenable, int, S_IRUGO|S_IRUSR);
91 MODULE_PARM_DESC(ql2xiidmaenable,
92 "Enables iIDMA settings "
93 "Default is 1 - perform iIDMA. 0 - no iIDMA.");
95 int ql2xmaxqueues = 1;
96 module_param(ql2xmaxqueues, int, S_IRUGO|S_IRUSR);
97 MODULE_PARM_DESC(ql2xmaxqueues,
98 "Enables MQ settings "
99 "Default is 1 for single queue. Set it to number \
100 of queues in MQ mode.");
102 * SCSI host template entry points
104 static int qla2xxx_slave_configure(struct scsi_device * device);
105 static int qla2xxx_slave_alloc(struct scsi_device *);
106 static int qla2xxx_scan_finished(struct Scsi_Host *, unsigned long time);
107 static void qla2xxx_scan_start(struct Scsi_Host *);
108 static void qla2xxx_slave_destroy(struct scsi_device *);
109 static int qla2x00_queuecommand(struct scsi_cmnd *cmd,
110 void (*fn)(struct scsi_cmnd *));
111 static int qla24xx_queuecommand(struct scsi_cmnd *cmd,
112 void (*fn)(struct scsi_cmnd *));
113 static int qla2xxx_eh_abort(struct scsi_cmnd *);
114 static int qla2xxx_eh_device_reset(struct scsi_cmnd *);
115 static int qla2xxx_eh_target_reset(struct scsi_cmnd *);
116 static int qla2xxx_eh_bus_reset(struct scsi_cmnd *);
117 static int qla2xxx_eh_host_reset(struct scsi_cmnd *);
119 static int qla2x00_change_queue_depth(struct scsi_device *, int);
120 static int qla2x00_change_queue_type(struct scsi_device *, int);
122 static struct scsi_host_template qla2x00_driver_template = {
123 .module = THIS_MODULE,
124 .name = QLA2XXX_DRIVER_NAME,
125 .queuecommand = qla2x00_queuecommand,
127 .eh_abort_handler = qla2xxx_eh_abort,
128 .eh_device_reset_handler = qla2xxx_eh_device_reset,
129 .eh_target_reset_handler = qla2xxx_eh_target_reset,
130 .eh_bus_reset_handler = qla2xxx_eh_bus_reset,
131 .eh_host_reset_handler = qla2xxx_eh_host_reset,
133 .slave_configure = qla2xxx_slave_configure,
135 .slave_alloc = qla2xxx_slave_alloc,
136 .slave_destroy = qla2xxx_slave_destroy,
137 .scan_finished = qla2xxx_scan_finished,
138 .scan_start = qla2xxx_scan_start,
139 .change_queue_depth = qla2x00_change_queue_depth,
140 .change_queue_type = qla2x00_change_queue_type,
143 .use_clustering = ENABLE_CLUSTERING,
144 .sg_tablesize = SG_ALL,
147 * The RISC allows for each command to transfer (2^32-1) bytes of data,
148 * which equates to 0x800000 sectors.
150 .max_sectors = 0xFFFF,
151 .shost_attrs = qla2x00_host_attrs,
154 struct scsi_host_template qla24xx_driver_template = {
155 .module = THIS_MODULE,
156 .name = QLA2XXX_DRIVER_NAME,
157 .queuecommand = qla24xx_queuecommand,
159 .eh_abort_handler = qla2xxx_eh_abort,
160 .eh_device_reset_handler = qla2xxx_eh_device_reset,
161 .eh_target_reset_handler = qla2xxx_eh_target_reset,
162 .eh_bus_reset_handler = qla2xxx_eh_bus_reset,
163 .eh_host_reset_handler = qla2xxx_eh_host_reset,
165 .slave_configure = qla2xxx_slave_configure,
167 .slave_alloc = qla2xxx_slave_alloc,
168 .slave_destroy = qla2xxx_slave_destroy,
169 .scan_finished = qla2xxx_scan_finished,
170 .scan_start = qla2xxx_scan_start,
171 .change_queue_depth = qla2x00_change_queue_depth,
172 .change_queue_type = qla2x00_change_queue_type,
175 .use_clustering = ENABLE_CLUSTERING,
176 .sg_tablesize = SG_ALL,
178 .max_sectors = 0xFFFF,
179 .shost_attrs = qla2x00_host_attrs,
182 static struct scsi_transport_template *qla2xxx_transport_template = NULL;
183 struct scsi_transport_template *qla2xxx_transport_vport_template = NULL;
185 /* TODO Convert to inlines
191 qla2x00_start_timer(scsi_qla_host_t *vha, void *func, unsigned long interval)
193 init_timer(&vha->timer);
194 vha->timer.expires = jiffies + interval * HZ;
195 vha->timer.data = (unsigned long)vha;
196 vha->timer.function = (void (*)(unsigned long))func;
197 add_timer(&vha->timer);
198 vha->timer_active = 1;
202 qla2x00_restart_timer(scsi_qla_host_t *vha, unsigned long interval)
204 mod_timer(&vha->timer, jiffies + interval * HZ);
207 static __inline__ void
208 qla2x00_stop_timer(scsi_qla_host_t *vha)
210 del_timer_sync(&vha->timer);
211 vha->timer_active = 0;
214 static int qla2x00_do_dpc(void *data);
216 static void qla2x00_rst_aen(scsi_qla_host_t *);
218 static int qla2x00_mem_alloc(struct qla_hw_data *, uint16_t, uint16_t,
219 struct req_que **, struct rsp_que **);
220 static void qla2x00_mem_free(struct qla_hw_data *);
221 static void qla2x00_sp_free_dma(srb_t *);
223 /* -------------------------------------------------------------------------- */
224 static int qla2x00_alloc_queues(struct qla_hw_data *ha)
226 ha->req_q_map = kzalloc(sizeof(struct req_que *) * ha->max_queues,
228 if (!ha->req_q_map) {
229 qla_printk(KERN_WARNING, ha,
230 "Unable to allocate memory for request queue ptrs\n");
234 ha->rsp_q_map = kzalloc(sizeof(struct rsp_que *) * ha->max_queues,
236 if (!ha->rsp_q_map) {
237 qla_printk(KERN_WARNING, ha,
238 "Unable to allocate memory for response queue ptrs\n");
241 set_bit(0, ha->rsp_qid_map);
242 set_bit(0, ha->req_qid_map);
246 kfree(ha->req_q_map);
247 ha->req_q_map = NULL;
252 static void qla2x00_free_que(struct qla_hw_data *ha, struct req_que *req,
255 if (rsp && rsp->ring)
256 dma_free_coherent(&ha->pdev->dev,
257 (rsp->length + 1) * sizeof(response_t),
258 rsp->ring, rsp->dma);
262 if (req && req->ring)
263 dma_free_coherent(&ha->pdev->dev,
264 (req->length + 1) * sizeof(request_t),
265 req->ring, req->dma);
271 static void qla2x00_free_queues(struct qla_hw_data *ha)
277 for (cnt = 0; cnt < ha->max_queues; cnt++) {
278 rsp = ha->rsp_q_map[cnt];
279 req = ha->req_q_map[cnt];
280 qla2x00_free_que(ha, req, rsp);
282 kfree(ha->rsp_q_map);
283 ha->rsp_q_map = NULL;
285 kfree(ha->req_q_map);
286 ha->req_q_map = NULL;
290 qla2x00_pci_info_str(struct scsi_qla_host *vha, char *str)
292 struct qla_hw_data *ha = vha->hw;
293 static char *pci_bus_modes[] = {
294 "33", "66", "100", "133",
299 pci_bus = (ha->pci_attr & (BIT_9 | BIT_10)) >> 9;
302 strcat(str, pci_bus_modes[pci_bus]);
304 pci_bus = (ha->pci_attr & BIT_8) >> 8;
306 strcat(str, pci_bus_modes[pci_bus]);
308 strcat(str, " MHz)");
314 qla24xx_pci_info_str(struct scsi_qla_host *vha, char *str)
316 static char *pci_bus_modes[] = { "33", "66", "100", "133", };
317 struct qla_hw_data *ha = vha->hw;
321 pcie_reg = pci_find_capability(ha->pdev, PCI_CAP_ID_EXP);
324 uint16_t pcie_lstat, lspeed, lwidth;
327 pci_read_config_word(ha->pdev, pcie_reg, &pcie_lstat);
328 lspeed = pcie_lstat & (BIT_0 | BIT_1 | BIT_2 | BIT_3);
329 lwidth = (pcie_lstat &
330 (BIT_4 | BIT_5 | BIT_6 | BIT_7 | BIT_8 | BIT_9)) >> 4;
332 strcpy(str, "PCIe (");
334 strcat(str, "2.5GT/s ");
335 else if (lspeed == 2)
336 strcat(str, "5.0GT/s ");
338 strcat(str, "<unknown> ");
339 snprintf(lwstr, sizeof(lwstr), "x%d)", lwidth);
346 pci_bus = (ha->pci_attr & CSRX_PCIX_BUS_MODE_MASK) >> 8;
347 if (pci_bus == 0 || pci_bus == 8) {
349 strcat(str, pci_bus_modes[pci_bus >> 3]);
353 strcat(str, "Mode 2");
355 strcat(str, "Mode 1");
357 strcat(str, pci_bus_modes[pci_bus & ~BIT_2]);
359 strcat(str, " MHz)");
365 qla2x00_fw_version_str(struct scsi_qla_host *vha, char *str)
368 struct qla_hw_data *ha = vha->hw;
370 sprintf(str, "%d.%02d.%02d ", ha->fw_major_version,
371 ha->fw_minor_version,
372 ha->fw_subminor_version);
374 if (ha->fw_attributes & BIT_9) {
379 switch (ha->fw_attributes & 0xFF) {
393 sprintf(un_str, "(%x)", ha->fw_attributes);
397 if (ha->fw_attributes & 0x100)
404 qla24xx_fw_version_str(struct scsi_qla_host *vha, char *str)
406 struct qla_hw_data *ha = vha->hw;
408 sprintf(str, "%d.%02d.%02d (%x)", ha->fw_major_version,
409 ha->fw_minor_version, ha->fw_subminor_version, ha->fw_attributes);
413 static inline srb_t *
414 qla2x00_get_new_sp(scsi_qla_host_t *vha, fc_port_t *fcport,
415 struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
418 struct qla_hw_data *ha = vha->hw;
420 sp = mempool_alloc(ha->srb_mempool, GFP_ATOMIC);
426 sp->que = ha->req_q_map[0];
428 CMD_SP(cmd) = (void *)sp;
429 cmd->scsi_done = done;
435 qla2x00_queuecommand(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
437 scsi_qla_host_t *vha = shost_priv(cmd->device->host);
438 fc_port_t *fcport = (struct fc_port *) cmd->device->hostdata;
439 struct fc_rport *rport = starget_to_rport(scsi_target(cmd->device));
440 struct qla_hw_data *ha = vha->hw;
444 if (unlikely(pci_channel_offline(ha->pdev))) {
445 cmd->result = DID_REQUEUE << 16;
446 goto qc_fail_command;
449 rval = fc_remote_port_chkready(rport);
452 goto qc_fail_command;
455 /* Close window on fcport/rport state-transitioning. */
459 if (atomic_read(&fcport->state) != FCS_ONLINE) {
460 if (atomic_read(&fcport->state) == FCS_DEVICE_DEAD ||
461 atomic_read(&vha->loop_state) == LOOP_DEAD) {
462 cmd->result = DID_NO_CONNECT << 16;
463 goto qc_fail_command;
468 spin_unlock_irq(vha->host->host_lock);
470 sp = qla2x00_get_new_sp(vha, fcport, cmd, done);
472 goto qc_host_busy_lock;
474 rval = ha->isp_ops->start_scsi(sp);
475 if (rval != QLA_SUCCESS)
476 goto qc_host_busy_free_sp;
478 spin_lock_irq(vha->host->host_lock);
482 qc_host_busy_free_sp:
483 qla2x00_sp_free_dma(sp);
484 mempool_free(sp, ha->srb_mempool);
487 spin_lock_irq(vha->host->host_lock);
488 return SCSI_MLQUEUE_HOST_BUSY;
491 return SCSI_MLQUEUE_TARGET_BUSY;
501 qla24xx_queuecommand(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
503 scsi_qla_host_t *vha = shost_priv(cmd->device->host);
504 fc_port_t *fcport = (struct fc_port *) cmd->device->hostdata;
505 struct fc_rport *rport = starget_to_rport(scsi_target(cmd->device));
506 struct qla_hw_data *ha = vha->hw;
507 struct scsi_qla_host *base_vha = pci_get_drvdata(ha->pdev);
511 if (unlikely(pci_channel_offline(ha->pdev))) {
512 cmd->result = DID_REQUEUE << 16;
513 goto qc24_fail_command;
516 rval = fc_remote_port_chkready(rport);
519 goto qc24_fail_command;
522 /* Close window on fcport/rport state-transitioning. */
524 goto qc24_target_busy;
526 if (atomic_read(&fcport->state) != FCS_ONLINE) {
527 if (atomic_read(&fcport->state) == FCS_DEVICE_DEAD ||
528 atomic_read(&base_vha->loop_state) == LOOP_DEAD) {
529 cmd->result = DID_NO_CONNECT << 16;
530 goto qc24_fail_command;
532 goto qc24_target_busy;
535 spin_unlock_irq(vha->host->host_lock);
537 sp = qla2x00_get_new_sp(base_vha, fcport, cmd, done);
539 goto qc24_host_busy_lock;
541 rval = ha->isp_ops->start_scsi(sp);
542 if (rval != QLA_SUCCESS)
543 goto qc24_host_busy_free_sp;
545 spin_lock_irq(vha->host->host_lock);
549 qc24_host_busy_free_sp:
550 qla2x00_sp_free_dma(sp);
551 mempool_free(sp, ha->srb_mempool);
554 spin_lock_irq(vha->host->host_lock);
555 return SCSI_MLQUEUE_HOST_BUSY;
558 return SCSI_MLQUEUE_TARGET_BUSY;
568 * qla2x00_eh_wait_on_command
569 * Waits for the command to be returned by the Firmware for some
573 * cmd = Scsi Command to wait on.
580 qla2x00_eh_wait_on_command(struct scsi_cmnd *cmd)
582 #define ABORT_POLLING_PERIOD 1000
583 #define ABORT_WAIT_ITER ((10 * 1000) / (ABORT_POLLING_PERIOD))
584 unsigned long wait_iter = ABORT_WAIT_ITER;
585 int ret = QLA_SUCCESS;
587 while (CMD_SP(cmd)) {
588 msleep(ABORT_POLLING_PERIOD);
594 ret = QLA_FUNCTION_FAILED;
600 * qla2x00_wait_for_hba_online
601 * Wait till the HBA is online after going through
602 * <= MAX_RETRIES_OF_ISP_ABORT or
603 * finally HBA is disabled ie marked offline
606 * ha - pointer to host adapter structure
609 * Does context switching-Release SPIN_LOCK
610 * (if any) before calling this routine.
613 * Success (Adapter is online) : 0
614 * Failed (Adapter is offline/disabled) : 1
617 qla2x00_wait_for_hba_online(scsi_qla_host_t *vha)
620 unsigned long wait_online;
621 struct qla_hw_data *ha = vha->hw;
622 scsi_qla_host_t *base_vha = pci_get_drvdata(ha->pdev);
624 wait_online = jiffies + (MAX_LOOP_TIMEOUT * HZ);
625 while (((test_bit(ISP_ABORT_NEEDED, &base_vha->dpc_flags)) ||
626 test_bit(ABORT_ISP_ACTIVE, &base_vha->dpc_flags) ||
627 test_bit(ISP_ABORT_RETRY, &base_vha->dpc_flags) ||
628 ha->dpc_active) && time_before(jiffies, wait_online)) {
632 if (base_vha->flags.online)
633 return_status = QLA_SUCCESS;
635 return_status = QLA_FUNCTION_FAILED;
637 return (return_status);
641 * qla2x00_wait_for_loop_ready
642 * Wait for MAX_LOOP_TIMEOUT(5 min) value for loop
643 * to be in LOOP_READY state.
645 * ha - pointer to host adapter structure
648 * Does context switching-Release SPIN_LOCK
649 * (if any) before calling this routine.
653 * Success (LOOP_READY) : 0
654 * Failed (LOOP_NOT_READY) : 1
657 qla2x00_wait_for_loop_ready(scsi_qla_host_t *vha)
659 int return_status = QLA_SUCCESS;
660 unsigned long loop_timeout ;
661 struct qla_hw_data *ha = vha->hw;
662 scsi_qla_host_t *base_vha = pci_get_drvdata(ha->pdev);
664 /* wait for 5 min at the max for loop to be ready */
665 loop_timeout = jiffies + (MAX_LOOP_TIMEOUT * HZ);
667 while ((!atomic_read(&base_vha->loop_down_timer) &&
668 atomic_read(&base_vha->loop_state) == LOOP_DOWN) ||
669 atomic_read(&base_vha->loop_state) != LOOP_READY) {
670 if (atomic_read(&base_vha->loop_state) == LOOP_DEAD) {
671 return_status = QLA_FUNCTION_FAILED;
675 if (time_after_eq(jiffies, loop_timeout)) {
676 return_status = QLA_FUNCTION_FAILED;
680 return (return_status);
684 qla2x00_abort_fcport_cmds(fc_port_t *fcport)
689 scsi_qla_host_t *vha = fcport->vha;
690 struct qla_hw_data *ha = vha->hw;
693 spin_lock_irqsave(&ha->hardware_lock, flags);
694 for (que = 0; que < QLA_MAX_HOST_QUES; que++) {
695 id = vha->req_ques[que];
696 req = ha->req_q_map[id];
699 for (cnt = 1; cnt < MAX_OUTSTANDING_COMMANDS; cnt++) {
700 sp = req->outstanding_cmds[cnt];
703 if (sp->fcport != fcport)
706 spin_unlock_irqrestore(&ha->hardware_lock, flags);
707 if (ha->isp_ops->abort_command(vha, sp, req)) {
708 DEBUG2(qla_printk(KERN_WARNING, ha,
709 "Abort failed -- %lx\n",
710 sp->cmd->serial_number));
712 if (qla2x00_eh_wait_on_command(sp->cmd) !=
714 DEBUG2(qla_printk(KERN_WARNING, ha,
715 "Abort failed while waiting -- %lx\n",
716 sp->cmd->serial_number));
718 spin_lock_irqsave(&ha->hardware_lock, flags);
721 spin_unlock_irqrestore(&ha->hardware_lock, flags);
725 qla2x00_block_error_handler(struct scsi_cmnd *cmnd)
727 struct Scsi_Host *shost = cmnd->device->host;
728 struct fc_rport *rport = starget_to_rport(scsi_target(cmnd->device));
731 spin_lock_irqsave(shost->host_lock, flags);
732 while (rport->port_state == FC_PORTSTATE_BLOCKED) {
733 spin_unlock_irqrestore(shost->host_lock, flags);
735 spin_lock_irqsave(shost->host_lock, flags);
737 spin_unlock_irqrestore(shost->host_lock, flags);
741 /**************************************************************************
745 * The abort function will abort the specified command.
748 * cmd = Linux SCSI command packet to be aborted.
751 * Either SUCCESS or FAILED.
754 * Only return FAILED if command not returned by firmware.
755 **************************************************************************/
757 qla2xxx_eh_abort(struct scsi_cmnd *cmd)
759 scsi_qla_host_t *vha = shost_priv(cmd->device->host);
762 unsigned int id, lun;
763 unsigned long serial;
766 struct qla_hw_data *ha = vha->hw;
770 qla2x00_block_error_handler(cmd);
777 id = cmd->device->id;
778 lun = cmd->device->lun;
779 serial = cmd->serial_number;
780 spt = (srb_t *) CMD_SP(cmd);
785 /* Check active list for command command. */
786 spin_lock_irqsave(&ha->hardware_lock, flags);
787 for (i = 1; i < MAX_OUTSTANDING_COMMANDS; i++) {
788 sp = req->outstanding_cmds[i];
796 DEBUG2(printk("%s(%ld): aborting sp %p from RISC."
797 " pid=%ld.\n", __func__, vha->host_no, sp, serial));
799 spin_unlock_irqrestore(&ha->hardware_lock, flags);
800 if (ha->isp_ops->abort_command(vha, sp, req)) {
801 DEBUG2(printk("%s(%ld): abort_command "
802 "mbx failed.\n", __func__, vha->host_no));
805 DEBUG3(printk("%s(%ld): abort_command "
806 "mbx success.\n", __func__, vha->host_no));
809 spin_lock_irqsave(&ha->hardware_lock, flags);
812 spin_unlock_irqrestore(&ha->hardware_lock, flags);
814 /* Wait for the command to be returned. */
816 if (qla2x00_eh_wait_on_command(cmd) != QLA_SUCCESS) {
817 qla_printk(KERN_ERR, ha,
818 "scsi(%ld:%d:%d): Abort handler timed out -- %lx "
819 "%x.\n", vha->host_no, id, lun, serial, ret);
824 qla_printk(KERN_INFO, ha,
825 "scsi(%ld:%d:%d): Abort command issued -- %d %lx %x.\n",
826 vha->host_no, id, lun, wait, serial, ret);
831 enum nexus_wait_type {
838 qla2x00_eh_wait_for_pending_commands(scsi_qla_host_t *vha, unsigned int t,
839 unsigned int l, srb_t *sp, enum nexus_wait_type type)
841 int cnt, match, status;
843 struct qla_hw_data *ha = vha->hw;
846 status = QLA_SUCCESS;
850 spin_lock_irqsave(&ha->hardware_lock, flags);
852 for (cnt = 1; status == QLA_SUCCESS &&
853 cnt < MAX_OUTSTANDING_COMMANDS; cnt++) {
854 sp = req->outstanding_cmds[cnt];
858 if (vha->vp_idx != sp->fcport->vha->vp_idx)
866 match = sp->cmd->device->id == t;
869 match = (sp->cmd->device->id == t &&
870 sp->cmd->device->lun == l);
876 spin_unlock_irqrestore(&ha->hardware_lock, flags);
877 status = qla2x00_eh_wait_on_command(sp->cmd);
878 spin_lock_irqsave(&ha->hardware_lock, flags);
880 spin_unlock_irqrestore(&ha->hardware_lock, flags);
885 static char *reset_errors[] = {
888 "Task management failed",
889 "Waiting for command completions",
893 __qla2xxx_eh_generic_reset(char *name, enum nexus_wait_type type,
894 struct scsi_cmnd *cmd, int (*do_reset)(struct fc_port *, unsigned int))
896 scsi_qla_host_t *vha = shost_priv(cmd->device->host);
897 fc_port_t *fcport = (struct fc_port *) cmd->device->hostdata;
900 qla2x00_block_error_handler(cmd);
905 qla_printk(KERN_INFO, vha->hw, "scsi(%ld:%d:%d): %s RESET ISSUED.\n",
906 vha->host_no, cmd->device->id, cmd->device->lun, name);
909 if (qla2x00_wait_for_hba_online(vha) != QLA_SUCCESS)
910 goto eh_reset_failed;
912 if (qla2x00_wait_for_loop_ready(vha) != QLA_SUCCESS)
913 goto eh_reset_failed;
915 if (do_reset(fcport, cmd->device->lun) != QLA_SUCCESS)
916 goto eh_reset_failed;
918 if (qla2x00_eh_wait_for_pending_commands(vha, cmd->device->id,
919 cmd->device->lun, (srb_t *) CMD_SP(cmd), type) != QLA_SUCCESS)
920 goto eh_reset_failed;
922 qla_printk(KERN_INFO, vha->hw, "scsi(%ld:%d:%d): %s RESET SUCCEEDED.\n",
923 vha->host_no, cmd->device->id, cmd->device->lun, name);
928 qla_printk(KERN_INFO, vha->hw, "scsi(%ld:%d:%d): %s RESET FAILED: %s.\n"
929 , vha->host_no, cmd->device->id, cmd->device->lun, name,
935 qla2xxx_eh_device_reset(struct scsi_cmnd *cmd)
937 scsi_qla_host_t *vha = shost_priv(cmd->device->host);
938 struct qla_hw_data *ha = vha->hw;
940 return __qla2xxx_eh_generic_reset("DEVICE", WAIT_LUN, cmd,
941 ha->isp_ops->lun_reset);
945 qla2xxx_eh_target_reset(struct scsi_cmnd *cmd)
947 scsi_qla_host_t *vha = shost_priv(cmd->device->host);
948 struct qla_hw_data *ha = vha->hw;
950 return __qla2xxx_eh_generic_reset("TARGET", WAIT_TARGET, cmd,
951 ha->isp_ops->target_reset);
954 /**************************************************************************
955 * qla2xxx_eh_bus_reset
958 * The bus reset function will reset the bus and abort any executing
962 * cmd = Linux SCSI command packet of the command that cause the
966 * SUCCESS/FAILURE (defined as macro in scsi.h).
968 **************************************************************************/
970 qla2xxx_eh_bus_reset(struct scsi_cmnd *cmd)
972 scsi_qla_host_t *vha = shost_priv(cmd->device->host);
973 fc_port_t *fcport = (struct fc_port *) cmd->device->hostdata;
975 unsigned int id, lun;
976 unsigned long serial;
977 srb_t *sp = (srb_t *) CMD_SP(cmd);
979 qla2x00_block_error_handler(cmd);
981 id = cmd->device->id;
982 lun = cmd->device->lun;
983 serial = cmd->serial_number;
988 qla_printk(KERN_INFO, vha->hw,
989 "scsi(%ld:%d:%d): BUS RESET ISSUED.\n", vha->host_no, id, lun);
991 if (qla2x00_wait_for_hba_online(vha) != QLA_SUCCESS) {
992 DEBUG2(printk("%s failed:board disabled\n",__func__));
993 goto eh_bus_reset_done;
996 if (qla2x00_wait_for_loop_ready(vha) == QLA_SUCCESS) {
997 if (qla2x00_loop_reset(vha) == QLA_SUCCESS)
1001 goto eh_bus_reset_done;
1003 /* Flush outstanding commands. */
1004 if (qla2x00_eh_wait_for_pending_commands(vha, 0, 0, sp, WAIT_HOST) !=
1009 qla_printk(KERN_INFO, vha->hw, "%s: reset %s\n", __func__,
1010 (ret == FAILED) ? "failed" : "succeded");
1015 /**************************************************************************
1016 * qla2xxx_eh_host_reset
1019 * The reset function will reset the Adapter.
1022 * cmd = Linux SCSI command packet of the command that cause the
1026 * Either SUCCESS or FAILED.
1029 **************************************************************************/
1031 qla2xxx_eh_host_reset(struct scsi_cmnd *cmd)
1033 scsi_qla_host_t *vha = shost_priv(cmd->device->host);
1034 fc_port_t *fcport = (struct fc_port *) cmd->device->hostdata;
1035 struct qla_hw_data *ha = vha->hw;
1037 unsigned int id, lun;
1038 unsigned long serial;
1039 srb_t *sp = (srb_t *) CMD_SP(cmd);
1040 scsi_qla_host_t *base_vha = pci_get_drvdata(ha->pdev);
1042 qla2x00_block_error_handler(cmd);
1044 id = cmd->device->id;
1045 lun = cmd->device->lun;
1046 serial = cmd->serial_number;
1051 qla_printk(KERN_INFO, ha,
1052 "scsi(%ld:%d:%d): ADAPTER RESET ISSUED.\n", vha->host_no, id, lun);
1054 if (qla2x00_wait_for_hba_online(vha) != QLA_SUCCESS)
1055 goto eh_host_reset_lock;
1058 * Fixme-may be dpc thread is active and processing
1059 * loop_resync,so wait a while for it to
1060 * be completed and then issue big hammer.Otherwise
1061 * it may cause I/O failure as big hammer marks the
1062 * devices as lost kicking of the port_down_timer
1063 * while dpc is stuck for the mailbox to complete.
1065 qla2x00_wait_for_loop_ready(vha);
1066 if (vha != base_vha) {
1067 if (qla2x00_vp_abort_isp(vha))
1068 goto eh_host_reset_lock;
1070 set_bit(ABORT_ISP_ACTIVE, &base_vha->dpc_flags);
1071 if (qla2x00_abort_isp(base_vha)) {
1072 clear_bit(ABORT_ISP_ACTIVE, &base_vha->dpc_flags);
1073 /* failed. schedule dpc to try */
1074 set_bit(ISP_ABORT_NEEDED, &base_vha->dpc_flags);
1076 if (qla2x00_wait_for_hba_online(vha) != QLA_SUCCESS)
1077 goto eh_host_reset_lock;
1079 clear_bit(ABORT_ISP_ACTIVE, &base_vha->dpc_flags);
1082 /* Waiting for command to be returned to OS.*/
1083 if (qla2x00_eh_wait_for_pending_commands(vha, 0, 0, sp, WAIT_HOST) ==
1088 qla_printk(KERN_INFO, ha, "%s: reset %s\n", __func__,
1089 (ret == FAILED) ? "failed" : "succeded");
1095 * qla2x00_loop_reset
1099 * ha = adapter block pointer.
1105 qla2x00_loop_reset(scsi_qla_host_t *vha)
1108 struct fc_port *fcport;
1109 struct qla_hw_data *ha = vha->hw;
1111 if (ha->flags.enable_lip_full_login && !vha->vp_idx) {
1112 ret = qla2x00_full_login_lip(vha);
1113 if (ret != QLA_SUCCESS) {
1114 DEBUG2_3(printk("%s(%ld): failed: "
1115 "full_login_lip=%d.\n", __func__, vha->host_no,
1118 atomic_set(&vha->loop_state, LOOP_DOWN);
1119 atomic_set(&vha->loop_down_timer, LOOP_DOWN_TIME);
1120 qla2x00_mark_all_devices_lost(vha, 0);
1121 qla2x00_wait_for_loop_ready(vha);
1124 if (ha->flags.enable_lip_reset && !vha->vp_idx) {
1125 ret = qla2x00_lip_reset(vha);
1126 if (ret != QLA_SUCCESS) {
1127 DEBUG2_3(printk("%s(%ld): failed: "
1128 "lip_reset=%d.\n", __func__, vha->host_no, ret));
1130 qla2x00_wait_for_loop_ready(vha);
1133 if (ha->flags.enable_target_reset) {
1134 list_for_each_entry(fcport, &vha->vp_fcports, list) {
1135 if (fcport->port_type != FCT_TARGET)
1138 ret = ha->isp_ops->target_reset(fcport, 0);
1139 if (ret != QLA_SUCCESS) {
1140 DEBUG2_3(printk("%s(%ld): bus_reset failed: "
1141 "target_reset=%d d_id=%x.\n", __func__,
1142 vha->host_no, ret, fcport->d_id.b24));
1146 /* Issue marker command only when we are going to start the I/O */
1147 vha->marker_needed = 1;
1153 qla2x00_abort_all_cmds(scsi_qla_host_t *vha, int res)
1156 unsigned long flags;
1158 struct qla_hw_data *ha = vha->hw;
1159 struct req_que *req;
1161 spin_lock_irqsave(&ha->hardware_lock, flags);
1162 for (que = 0; que < ha->max_queues; que++) {
1163 req = ha->req_q_map[que];
1166 for (cnt = 1; cnt < MAX_OUTSTANDING_COMMANDS; cnt++) {
1167 sp = req->outstanding_cmds[cnt];
1168 if (sp && sp->fcport->vha == vha) {
1169 req->outstanding_cmds[cnt] = NULL;
1170 sp->cmd->result = res;
1171 qla2x00_sp_compl(ha, sp);
1175 spin_unlock_irqrestore(&ha->hardware_lock, flags);
1179 qla2xxx_slave_alloc(struct scsi_device *sdev)
1181 struct fc_rport *rport = starget_to_rport(scsi_target(sdev));
1183 if (!rport || fc_remote_port_chkready(rport))
1186 sdev->hostdata = *(fc_port_t **)rport->dd_data;
1192 qla2xxx_slave_configure(struct scsi_device *sdev)
1194 scsi_qla_host_t *vha = shost_priv(sdev->host);
1195 struct qla_hw_data *ha = vha->hw;
1196 struct fc_rport *rport = starget_to_rport(sdev->sdev_target);
1197 struct req_que *req = ha->req_q_map[vha->req_ques[0]];
1199 if (sdev->tagged_supported)
1200 scsi_activate_tcq(sdev, req->max_q_depth);
1202 scsi_deactivate_tcq(sdev, req->max_q_depth);
1204 rport->dev_loss_tmo = ha->port_down_retry_count;
1210 qla2xxx_slave_destroy(struct scsi_device *sdev)
1212 sdev->hostdata = NULL;
1216 qla2x00_change_queue_depth(struct scsi_device *sdev, int qdepth)
1218 scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), qdepth);
1219 return sdev->queue_depth;
1223 qla2x00_change_queue_type(struct scsi_device *sdev, int tag_type)
1225 if (sdev->tagged_supported) {
1226 scsi_set_tag_type(sdev, tag_type);
1228 scsi_activate_tcq(sdev, sdev->queue_depth);
1230 scsi_deactivate_tcq(sdev, sdev->queue_depth);
1238 * qla2x00_config_dma_addressing() - Configure OS DMA addressing method.
1241 * At exit, the @ha's flags.enable_64bit_addressing set to indicated
1242 * supported addressing method.
1245 qla2x00_config_dma_addressing(scsi_qla_host_t *vha)
1247 struct qla_hw_data *ha = vha->hw;
1248 /* Assume a 32bit DMA mask. */
1249 ha->flags.enable_64bit_addressing = 0;
1251 if (!dma_set_mask(&ha->pdev->dev, DMA_64BIT_MASK)) {
1252 /* Any upper-dword bits set? */
1253 if (MSD(dma_get_required_mask(&ha->pdev->dev)) &&
1254 !pci_set_consistent_dma_mask(ha->pdev, DMA_64BIT_MASK)) {
1255 /* Ok, a 64bit DMA mask is applicable. */
1256 ha->flags.enable_64bit_addressing = 1;
1257 ha->isp_ops->calc_req_entries = qla2x00_calc_iocbs_64;
1258 ha->isp_ops->build_iocbs = qla2x00_build_scsi_iocbs_64;
1263 dma_set_mask(&ha->pdev->dev, DMA_32BIT_MASK);
1264 pci_set_consistent_dma_mask(ha->pdev, DMA_32BIT_MASK);
1268 qla2x00_enable_intrs(struct qla_hw_data *ha)
1270 unsigned long flags = 0;
1271 struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
1273 spin_lock_irqsave(&ha->hardware_lock, flags);
1274 ha->interrupts_on = 1;
1275 /* enable risc and host interrupts */
1276 WRT_REG_WORD(®->ictrl, ICR_EN_INT | ICR_EN_RISC);
1277 RD_REG_WORD(®->ictrl);
1278 spin_unlock_irqrestore(&ha->hardware_lock, flags);
1283 qla2x00_disable_intrs(struct qla_hw_data *ha)
1285 unsigned long flags = 0;
1286 struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
1288 spin_lock_irqsave(&ha->hardware_lock, flags);
1289 ha->interrupts_on = 0;
1290 /* disable risc and host interrupts */
1291 WRT_REG_WORD(®->ictrl, 0);
1292 RD_REG_WORD(®->ictrl);
1293 spin_unlock_irqrestore(&ha->hardware_lock, flags);
1297 qla24xx_enable_intrs(struct qla_hw_data *ha)
1299 unsigned long flags = 0;
1300 struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
1302 spin_lock_irqsave(&ha->hardware_lock, flags);
1303 ha->interrupts_on = 1;
1304 WRT_REG_DWORD(®->ictrl, ICRX_EN_RISC_INT);
1305 RD_REG_DWORD(®->ictrl);
1306 spin_unlock_irqrestore(&ha->hardware_lock, flags);
1310 qla24xx_disable_intrs(struct qla_hw_data *ha)
1312 unsigned long flags = 0;
1313 struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
1315 if (IS_NOPOLLING_TYPE(ha))
1317 spin_lock_irqsave(&ha->hardware_lock, flags);
1318 ha->interrupts_on = 0;
1319 WRT_REG_DWORD(®->ictrl, 0);
1320 RD_REG_DWORD(®->ictrl);
1321 spin_unlock_irqrestore(&ha->hardware_lock, flags);
1324 static struct isp_operations qla2100_isp_ops = {
1325 .pci_config = qla2100_pci_config,
1326 .reset_chip = qla2x00_reset_chip,
1327 .chip_diag = qla2x00_chip_diag,
1328 .config_rings = qla2x00_config_rings,
1329 .reset_adapter = qla2x00_reset_adapter,
1330 .nvram_config = qla2x00_nvram_config,
1331 .update_fw_options = qla2x00_update_fw_options,
1332 .load_risc = qla2x00_load_risc,
1333 .pci_info_str = qla2x00_pci_info_str,
1334 .fw_version_str = qla2x00_fw_version_str,
1335 .intr_handler = qla2100_intr_handler,
1336 .enable_intrs = qla2x00_enable_intrs,
1337 .disable_intrs = qla2x00_disable_intrs,
1338 .abort_command = qla2x00_abort_command,
1339 .target_reset = qla2x00_abort_target,
1340 .lun_reset = qla2x00_lun_reset,
1341 .fabric_login = qla2x00_login_fabric,
1342 .fabric_logout = qla2x00_fabric_logout,
1343 .calc_req_entries = qla2x00_calc_iocbs_32,
1344 .build_iocbs = qla2x00_build_scsi_iocbs_32,
1345 .prep_ms_iocb = qla2x00_prep_ms_iocb,
1346 .prep_ms_fdmi_iocb = qla2x00_prep_ms_fdmi_iocb,
1347 .read_nvram = qla2x00_read_nvram_data,
1348 .write_nvram = qla2x00_write_nvram_data,
1349 .fw_dump = qla2100_fw_dump,
1352 .beacon_blink = NULL,
1353 .read_optrom = qla2x00_read_optrom_data,
1354 .write_optrom = qla2x00_write_optrom_data,
1355 .get_flash_version = qla2x00_get_flash_version,
1356 .start_scsi = qla2x00_start_scsi,
1357 .wrt_req_reg = NULL,
1358 .wrt_rsp_reg = NULL,
1362 static struct isp_operations qla2300_isp_ops = {
1363 .pci_config = qla2300_pci_config,
1364 .reset_chip = qla2x00_reset_chip,
1365 .chip_diag = qla2x00_chip_diag,
1366 .config_rings = qla2x00_config_rings,
1367 .reset_adapter = qla2x00_reset_adapter,
1368 .nvram_config = qla2x00_nvram_config,
1369 .update_fw_options = qla2x00_update_fw_options,
1370 .load_risc = qla2x00_load_risc,
1371 .pci_info_str = qla2x00_pci_info_str,
1372 .fw_version_str = qla2x00_fw_version_str,
1373 .intr_handler = qla2300_intr_handler,
1374 .enable_intrs = qla2x00_enable_intrs,
1375 .disable_intrs = qla2x00_disable_intrs,
1376 .abort_command = qla2x00_abort_command,
1377 .target_reset = qla2x00_abort_target,
1378 .lun_reset = qla2x00_lun_reset,
1379 .fabric_login = qla2x00_login_fabric,
1380 .fabric_logout = qla2x00_fabric_logout,
1381 .calc_req_entries = qla2x00_calc_iocbs_32,
1382 .build_iocbs = qla2x00_build_scsi_iocbs_32,
1383 .prep_ms_iocb = qla2x00_prep_ms_iocb,
1384 .prep_ms_fdmi_iocb = qla2x00_prep_ms_fdmi_iocb,
1385 .read_nvram = qla2x00_read_nvram_data,
1386 .write_nvram = qla2x00_write_nvram_data,
1387 .fw_dump = qla2300_fw_dump,
1388 .beacon_on = qla2x00_beacon_on,
1389 .beacon_off = qla2x00_beacon_off,
1390 .beacon_blink = qla2x00_beacon_blink,
1391 .read_optrom = qla2x00_read_optrom_data,
1392 .write_optrom = qla2x00_write_optrom_data,
1393 .get_flash_version = qla2x00_get_flash_version,
1394 .start_scsi = qla2x00_start_scsi,
1395 .wrt_req_reg = NULL,
1396 .wrt_rsp_reg = NULL,
1400 static struct isp_operations qla24xx_isp_ops = {
1401 .pci_config = qla24xx_pci_config,
1402 .reset_chip = qla24xx_reset_chip,
1403 .chip_diag = qla24xx_chip_diag,
1404 .config_rings = qla24xx_config_rings,
1405 .reset_adapter = qla24xx_reset_adapter,
1406 .nvram_config = qla24xx_nvram_config,
1407 .update_fw_options = qla24xx_update_fw_options,
1408 .load_risc = qla24xx_load_risc,
1409 .pci_info_str = qla24xx_pci_info_str,
1410 .fw_version_str = qla24xx_fw_version_str,
1411 .intr_handler = qla24xx_intr_handler,
1412 .enable_intrs = qla24xx_enable_intrs,
1413 .disable_intrs = qla24xx_disable_intrs,
1414 .abort_command = qla24xx_abort_command,
1415 .target_reset = qla24xx_abort_target,
1416 .lun_reset = qla24xx_lun_reset,
1417 .fabric_login = qla24xx_login_fabric,
1418 .fabric_logout = qla24xx_fabric_logout,
1419 .calc_req_entries = NULL,
1420 .build_iocbs = NULL,
1421 .prep_ms_iocb = qla24xx_prep_ms_iocb,
1422 .prep_ms_fdmi_iocb = qla24xx_prep_ms_fdmi_iocb,
1423 .read_nvram = qla24xx_read_nvram_data,
1424 .write_nvram = qla24xx_write_nvram_data,
1425 .fw_dump = qla24xx_fw_dump,
1426 .beacon_on = qla24xx_beacon_on,
1427 .beacon_off = qla24xx_beacon_off,
1428 .beacon_blink = qla24xx_beacon_blink,
1429 .read_optrom = qla24xx_read_optrom_data,
1430 .write_optrom = qla24xx_write_optrom_data,
1431 .get_flash_version = qla24xx_get_flash_version,
1432 .start_scsi = qla24xx_start_scsi,
1433 .wrt_req_reg = qla24xx_wrt_req_reg,
1434 .wrt_rsp_reg = qla24xx_wrt_rsp_reg,
1435 .rd_req_reg = qla24xx_rd_req_reg,
1438 static struct isp_operations qla25xx_isp_ops = {
1439 .pci_config = qla25xx_pci_config,
1440 .reset_chip = qla24xx_reset_chip,
1441 .chip_diag = qla24xx_chip_diag,
1442 .config_rings = qla24xx_config_rings,
1443 .reset_adapter = qla24xx_reset_adapter,
1444 .nvram_config = qla24xx_nvram_config,
1445 .update_fw_options = qla24xx_update_fw_options,
1446 .load_risc = qla24xx_load_risc,
1447 .pci_info_str = qla24xx_pci_info_str,
1448 .fw_version_str = qla24xx_fw_version_str,
1449 .intr_handler = qla24xx_intr_handler,
1450 .enable_intrs = qla24xx_enable_intrs,
1451 .disable_intrs = qla24xx_disable_intrs,
1452 .abort_command = qla24xx_abort_command,
1453 .target_reset = qla24xx_abort_target,
1454 .lun_reset = qla24xx_lun_reset,
1455 .fabric_login = qla24xx_login_fabric,
1456 .fabric_logout = qla24xx_fabric_logout,
1457 .calc_req_entries = NULL,
1458 .build_iocbs = NULL,
1459 .prep_ms_iocb = qla24xx_prep_ms_iocb,
1460 .prep_ms_fdmi_iocb = qla24xx_prep_ms_fdmi_iocb,
1461 .read_nvram = qla25xx_read_nvram_data,
1462 .write_nvram = qla25xx_write_nvram_data,
1463 .fw_dump = qla25xx_fw_dump,
1464 .beacon_on = qla24xx_beacon_on,
1465 .beacon_off = qla24xx_beacon_off,
1466 .beacon_blink = qla24xx_beacon_blink,
1467 .read_optrom = qla25xx_read_optrom_data,
1468 .write_optrom = qla24xx_write_optrom_data,
1469 .get_flash_version = qla24xx_get_flash_version,
1470 .start_scsi = qla24xx_start_scsi,
1471 .wrt_req_reg = qla24xx_wrt_req_reg,
1472 .wrt_rsp_reg = qla24xx_wrt_rsp_reg,
1473 .rd_req_reg = qla24xx_rd_req_reg,
1476 static struct isp_operations qla81xx_isp_ops = {
1477 .pci_config = qla25xx_pci_config,
1478 .reset_chip = qla24xx_reset_chip,
1479 .chip_diag = qla24xx_chip_diag,
1480 .config_rings = qla24xx_config_rings,
1481 .reset_adapter = qla24xx_reset_adapter,
1482 .nvram_config = qla81xx_nvram_config,
1483 .update_fw_options = qla81xx_update_fw_options,
1484 .load_risc = qla81xx_load_risc,
1485 .pci_info_str = qla24xx_pci_info_str,
1486 .fw_version_str = qla24xx_fw_version_str,
1487 .intr_handler = qla24xx_intr_handler,
1488 .enable_intrs = qla24xx_enable_intrs,
1489 .disable_intrs = qla24xx_disable_intrs,
1490 .abort_command = qla24xx_abort_command,
1491 .target_reset = qla24xx_abort_target,
1492 .lun_reset = qla24xx_lun_reset,
1493 .fabric_login = qla24xx_login_fabric,
1494 .fabric_logout = qla24xx_fabric_logout,
1495 .calc_req_entries = NULL,
1496 .build_iocbs = NULL,
1497 .prep_ms_iocb = qla24xx_prep_ms_iocb,
1498 .prep_ms_fdmi_iocb = qla24xx_prep_ms_fdmi_iocb,
1499 .read_nvram = qla25xx_read_nvram_data,
1500 .write_nvram = qla25xx_write_nvram_data,
1501 .fw_dump = qla81xx_fw_dump,
1502 .beacon_on = qla24xx_beacon_on,
1503 .beacon_off = qla24xx_beacon_off,
1504 .beacon_blink = qla24xx_beacon_blink,
1505 .read_optrom = qla25xx_read_optrom_data,
1506 .write_optrom = qla24xx_write_optrom_data,
1507 .get_flash_version = qla24xx_get_flash_version,
1508 .start_scsi = qla24xx_start_scsi,
1509 .wrt_req_reg = qla24xx_wrt_req_reg,
1510 .wrt_rsp_reg = qla24xx_wrt_rsp_reg,
1511 .rd_req_reg = qla24xx_rd_req_reg,
1515 qla2x00_set_isp_flags(struct qla_hw_data *ha)
1517 ha->device_type = DT_EXTENDED_IDS;
1518 switch (ha->pdev->device) {
1519 case PCI_DEVICE_ID_QLOGIC_ISP2100:
1520 ha->device_type |= DT_ISP2100;
1521 ha->device_type &= ~DT_EXTENDED_IDS;
1522 ha->fw_srisc_address = RISC_START_ADDRESS_2100;
1524 case PCI_DEVICE_ID_QLOGIC_ISP2200:
1525 ha->device_type |= DT_ISP2200;
1526 ha->device_type &= ~DT_EXTENDED_IDS;
1527 ha->fw_srisc_address = RISC_START_ADDRESS_2100;
1529 case PCI_DEVICE_ID_QLOGIC_ISP2300:
1530 ha->device_type |= DT_ISP2300;
1531 ha->device_type |= DT_ZIO_SUPPORTED;
1532 ha->fw_srisc_address = RISC_START_ADDRESS_2300;
1534 case PCI_DEVICE_ID_QLOGIC_ISP2312:
1535 ha->device_type |= DT_ISP2312;
1536 ha->device_type |= DT_ZIO_SUPPORTED;
1537 ha->fw_srisc_address = RISC_START_ADDRESS_2300;
1539 case PCI_DEVICE_ID_QLOGIC_ISP2322:
1540 ha->device_type |= DT_ISP2322;
1541 ha->device_type |= DT_ZIO_SUPPORTED;
1542 if (ha->pdev->subsystem_vendor == 0x1028 &&
1543 ha->pdev->subsystem_device == 0x0170)
1544 ha->device_type |= DT_OEM_001;
1545 ha->fw_srisc_address = RISC_START_ADDRESS_2300;
1547 case PCI_DEVICE_ID_QLOGIC_ISP6312:
1548 ha->device_type |= DT_ISP6312;
1549 ha->fw_srisc_address = RISC_START_ADDRESS_2300;
1551 case PCI_DEVICE_ID_QLOGIC_ISP6322:
1552 ha->device_type |= DT_ISP6322;
1553 ha->fw_srisc_address = RISC_START_ADDRESS_2300;
1555 case PCI_DEVICE_ID_QLOGIC_ISP2422:
1556 ha->device_type |= DT_ISP2422;
1557 ha->device_type |= DT_ZIO_SUPPORTED;
1558 ha->device_type |= DT_FWI2;
1559 ha->device_type |= DT_IIDMA;
1560 ha->fw_srisc_address = RISC_START_ADDRESS_2400;
1562 case PCI_DEVICE_ID_QLOGIC_ISP2432:
1563 ha->device_type |= DT_ISP2432;
1564 ha->device_type |= DT_ZIO_SUPPORTED;
1565 ha->device_type |= DT_FWI2;
1566 ha->device_type |= DT_IIDMA;
1567 ha->fw_srisc_address = RISC_START_ADDRESS_2400;
1569 case PCI_DEVICE_ID_QLOGIC_ISP8432:
1570 ha->device_type |= DT_ISP8432;
1571 ha->device_type |= DT_ZIO_SUPPORTED;
1572 ha->device_type |= DT_FWI2;
1573 ha->device_type |= DT_IIDMA;
1574 ha->fw_srisc_address = RISC_START_ADDRESS_2400;
1576 case PCI_DEVICE_ID_QLOGIC_ISP5422:
1577 ha->device_type |= DT_ISP5422;
1578 ha->device_type |= DT_FWI2;
1579 ha->fw_srisc_address = RISC_START_ADDRESS_2400;
1581 case PCI_DEVICE_ID_QLOGIC_ISP5432:
1582 ha->device_type |= DT_ISP5432;
1583 ha->device_type |= DT_FWI2;
1584 ha->fw_srisc_address = RISC_START_ADDRESS_2400;
1586 case PCI_DEVICE_ID_QLOGIC_ISP2532:
1587 ha->device_type |= DT_ISP2532;
1588 ha->device_type |= DT_ZIO_SUPPORTED;
1589 ha->device_type |= DT_FWI2;
1590 ha->device_type |= DT_IIDMA;
1591 ha->fw_srisc_address = RISC_START_ADDRESS_2400;
1593 case PCI_DEVICE_ID_QLOGIC_ISP8001:
1594 ha->device_type |= DT_ISP8001;
1595 ha->device_type |= DT_ZIO_SUPPORTED;
1596 ha->device_type |= DT_FWI2;
1597 ha->device_type |= DT_IIDMA;
1598 ha->fw_srisc_address = RISC_START_ADDRESS_2400;
1604 qla2x00_iospace_config(struct qla_hw_data *ha)
1606 resource_size_t pio;
1609 if (pci_request_selected_regions(ha->pdev, ha->bars,
1610 QLA2XXX_DRIVER_NAME)) {
1611 qla_printk(KERN_WARNING, ha,
1612 "Failed to reserve PIO/MMIO regions (%s)\n",
1613 pci_name(ha->pdev));
1615 goto iospace_error_exit;
1617 if (!(ha->bars & 1))
1620 /* We only need PIO for Flash operations on ISP2312 v2 chips. */
1621 pio = pci_resource_start(ha->pdev, 0);
1622 if (pci_resource_flags(ha->pdev, 0) & IORESOURCE_IO) {
1623 if (pci_resource_len(ha->pdev, 0) < MIN_IOBASE_LEN) {
1624 qla_printk(KERN_WARNING, ha,
1625 "Invalid PCI I/O region size (%s)...\n",
1626 pci_name(ha->pdev));
1630 qla_printk(KERN_WARNING, ha,
1631 "region #0 not a PIO resource (%s)...\n",
1632 pci_name(ha->pdev));
1635 ha->pio_address = pio;
1638 /* Use MMIO operations for all accesses. */
1639 if (!(pci_resource_flags(ha->pdev, 1) & IORESOURCE_MEM)) {
1640 qla_printk(KERN_ERR, ha,
1641 "region #1 not an MMIO resource (%s), aborting\n",
1642 pci_name(ha->pdev));
1643 goto iospace_error_exit;
1645 if (pci_resource_len(ha->pdev, 1) < MIN_IOBASE_LEN) {
1646 qla_printk(KERN_ERR, ha,
1647 "Invalid PCI mem region size (%s), aborting\n",
1648 pci_name(ha->pdev));
1649 goto iospace_error_exit;
1652 ha->iobase = ioremap(pci_resource_start(ha->pdev, 1), MIN_IOBASE_LEN);
1654 qla_printk(KERN_ERR, ha,
1655 "cannot remap MMIO (%s), aborting\n", pci_name(ha->pdev));
1657 goto iospace_error_exit;
1660 /* Determine queue resources */
1662 if (ql2xmaxqueues <= 1 || (!IS_QLA25XX(ha) && !IS_QLA81XX(ha)))
1664 ha->mqiobase = ioremap(pci_resource_start(ha->pdev, 3),
1665 pci_resource_len(ha->pdev, 3));
1667 /* Read MSIX vector size of the board */
1668 pci_read_config_word(ha->pdev, QLA_PCI_MSIX_CONTROL, &msix);
1669 ha->msix_count = msix;
1670 /* Max queues are bounded by available msix vectors */
1671 /* queue 0 uses two msix vectors */
1672 if (ha->msix_count - 1 < ql2xmaxqueues)
1673 ha->max_queues = ha->msix_count - 1;
1674 else if (ql2xmaxqueues > QLA_MQ_SIZE)
1675 ha->max_queues = QLA_MQ_SIZE;
1677 ha->max_queues = ql2xmaxqueues;
1678 qla_printk(KERN_INFO, ha,
1679 "MSI-X vector count: %d\n", msix);
1683 ha->msix_count = ha->max_queues + 1;
1691 qla2xxx_scan_start(struct Scsi_Host *shost)
1693 scsi_qla_host_t *vha = shost_priv(shost);
1695 set_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags);
1696 set_bit(LOCAL_LOOP_UPDATE, &vha->dpc_flags);
1697 set_bit(RSCN_UPDATE, &vha->dpc_flags);
1698 set_bit(NPIV_CONFIG_NEEDED, &vha->dpc_flags);
1702 qla2xxx_scan_finished(struct Scsi_Host *shost, unsigned long time)
1704 scsi_qla_host_t *vha = shost_priv(shost);
1708 if (time > vha->hw->loop_reset_delay * HZ)
1711 return atomic_read(&vha->loop_state) == LOOP_READY;
1715 * PCI driver interface
1717 static int __devinit
1718 qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
1721 struct Scsi_Host *host;
1722 scsi_qla_host_t *base_vha = NULL;
1723 struct qla_hw_data *ha;
1726 struct scsi_host_template *sht;
1727 int bars, max_id, mem_only = 0;
1728 uint16_t req_length = 0, rsp_length = 0;
1729 struct req_que *req = NULL;
1730 struct rsp_que *rsp = NULL;
1732 bars = pci_select_bars(pdev, IORESOURCE_MEM | IORESOURCE_IO);
1733 sht = &qla2x00_driver_template;
1734 if (pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2422 ||
1735 pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2432 ||
1736 pdev->device == PCI_DEVICE_ID_QLOGIC_ISP8432 ||
1737 pdev->device == PCI_DEVICE_ID_QLOGIC_ISP5422 ||
1738 pdev->device == PCI_DEVICE_ID_QLOGIC_ISP5432 ||
1739 pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2532 ||
1740 pdev->device == PCI_DEVICE_ID_QLOGIC_ISP8001) {
1741 bars = pci_select_bars(pdev, IORESOURCE_MEM);
1742 sht = &qla24xx_driver_template;
1747 if (pci_enable_device_mem(pdev))
1750 if (pci_enable_device(pdev))
1754 /* This may fail but that's ok */
1755 pci_enable_pcie_error_reporting(pdev);
1757 ha = kzalloc(sizeof(struct qla_hw_data), GFP_KERNEL);
1759 DEBUG(printk("Unable to allocate memory for ha\n"));
1764 /* Clear our data area */
1766 ha->mem_only = mem_only;
1767 spin_lock_init(&ha->hardware_lock);
1769 /* Set ISP-type information. */
1770 qla2x00_set_isp_flags(ha);
1771 /* Configure PCI I/O space */
1772 ret = qla2x00_iospace_config(ha);
1774 goto probe_hw_failed;
1776 qla_printk(KERN_INFO, ha,
1777 "Found an ISP%04X, irq %d, iobase 0x%p\n", pdev->device, pdev->irq,
1780 ha->prev_topology = 0;
1781 ha->init_cb_size = sizeof(init_cb_t);
1782 ha->link_data_rate = PORT_SPEED_UNKNOWN;
1783 ha->optrom_size = OPTROM_SIZE_2300;
1785 /* Assign ISP specific operations. */
1786 max_id = MAX_TARGETS_2200;
1787 if (IS_QLA2100(ha)) {
1788 max_id = MAX_TARGETS_2100;
1789 ha->mbx_count = MAILBOX_REGISTER_COUNT_2100;
1790 req_length = REQUEST_ENTRY_CNT_2100;
1791 rsp_length = RESPONSE_ENTRY_CNT_2100;
1792 ha->max_loop_id = SNS_LAST_LOOP_ID_2100;
1793 ha->gid_list_info_size = 4;
1794 ha->flash_conf_off = ~0;
1795 ha->flash_data_off = ~0;
1796 ha->nvram_conf_off = ~0;
1797 ha->nvram_data_off = ~0;
1798 ha->isp_ops = &qla2100_isp_ops;
1799 } else if (IS_QLA2200(ha)) {
1800 ha->mbx_count = MAILBOX_REGISTER_COUNT;
1801 req_length = REQUEST_ENTRY_CNT_2200;
1802 rsp_length = RESPONSE_ENTRY_CNT_2100;
1803 ha->max_loop_id = SNS_LAST_LOOP_ID_2100;
1804 ha->gid_list_info_size = 4;
1805 ha->flash_conf_off = ~0;
1806 ha->flash_data_off = ~0;
1807 ha->nvram_conf_off = ~0;
1808 ha->nvram_data_off = ~0;
1809 ha->isp_ops = &qla2100_isp_ops;
1810 } else if (IS_QLA23XX(ha)) {
1811 ha->mbx_count = MAILBOX_REGISTER_COUNT;
1812 req_length = REQUEST_ENTRY_CNT_2200;
1813 rsp_length = RESPONSE_ENTRY_CNT_2300;
1814 ha->max_loop_id = SNS_LAST_LOOP_ID_2300;
1815 ha->gid_list_info_size = 6;
1816 if (IS_QLA2322(ha) || IS_QLA6322(ha))
1817 ha->optrom_size = OPTROM_SIZE_2322;
1818 ha->flash_conf_off = ~0;
1819 ha->flash_data_off = ~0;
1820 ha->nvram_conf_off = ~0;
1821 ha->nvram_data_off = ~0;
1822 ha->isp_ops = &qla2300_isp_ops;
1823 } else if (IS_QLA24XX_TYPE(ha)) {
1824 ha->mbx_count = MAILBOX_REGISTER_COUNT;
1825 req_length = REQUEST_ENTRY_CNT_24XX;
1826 rsp_length = RESPONSE_ENTRY_CNT_2300;
1827 ha->max_loop_id = SNS_LAST_LOOP_ID_2300;
1828 ha->init_cb_size = sizeof(struct mid_init_cb_24xx);
1829 ha->gid_list_info_size = 8;
1830 ha->optrom_size = OPTROM_SIZE_24XX;
1831 ha->nvram_npiv_size = QLA_MAX_VPORTS_QLA24XX;
1832 ha->isp_ops = &qla24xx_isp_ops;
1833 ha->flash_conf_off = FARX_ACCESS_FLASH_CONF;
1834 ha->flash_data_off = FARX_ACCESS_FLASH_DATA;
1835 ha->nvram_conf_off = FARX_ACCESS_NVRAM_CONF;
1836 ha->nvram_data_off = FARX_ACCESS_NVRAM_DATA;
1837 } else if (IS_QLA25XX(ha)) {
1838 ha->mbx_count = MAILBOX_REGISTER_COUNT;
1839 req_length = REQUEST_ENTRY_CNT_24XX;
1840 rsp_length = RESPONSE_ENTRY_CNT_2300;
1841 ha->max_loop_id = SNS_LAST_LOOP_ID_2300;
1842 ha->init_cb_size = sizeof(struct mid_init_cb_24xx);
1843 ha->gid_list_info_size = 8;
1844 ha->optrom_size = OPTROM_SIZE_25XX;
1845 ha->nvram_npiv_size = QLA_MAX_VPORTS_QLA25XX;
1846 ha->isp_ops = &qla25xx_isp_ops;
1847 ha->flash_conf_off = FARX_ACCESS_FLASH_CONF;
1848 ha->flash_data_off = FARX_ACCESS_FLASH_DATA;
1849 ha->nvram_conf_off = FARX_ACCESS_NVRAM_CONF;
1850 ha->nvram_data_off = FARX_ACCESS_NVRAM_DATA;
1851 } else if (IS_QLA81XX(ha)) {
1852 ha->mbx_count = MAILBOX_REGISTER_COUNT;
1853 req_length = REQUEST_ENTRY_CNT_24XX;
1854 rsp_length = RESPONSE_ENTRY_CNT_2300;
1855 ha->max_loop_id = SNS_LAST_LOOP_ID_2300;
1856 ha->init_cb_size = sizeof(struct mid_init_cb_81xx);
1857 ha->gid_list_info_size = 8;
1858 ha->optrom_size = OPTROM_SIZE_81XX;
1859 ha->isp_ops = &qla81xx_isp_ops;
1860 ha->flash_conf_off = FARX_ACCESS_FLASH_CONF_81XX;
1861 ha->flash_data_off = FARX_ACCESS_FLASH_DATA_81XX;
1862 ha->nvram_conf_off = ~0;
1863 ha->nvram_data_off = ~0;
1866 mutex_init(&ha->vport_lock);
1867 init_completion(&ha->mbx_cmd_comp);
1868 complete(&ha->mbx_cmd_comp);
1869 init_completion(&ha->mbx_intr_comp);
1871 set_bit(0, (unsigned long *) ha->vp_idx_map);
1873 ret = qla2x00_mem_alloc(ha, req_length, rsp_length, &req, &rsp);
1875 qla_printk(KERN_WARNING, ha,
1876 "[ERROR] Failed to allocate memory for adapter\n");
1878 goto probe_hw_failed;
1881 req->max_q_depth = MAX_Q_DEPTH;
1882 if (ql2xmaxqdepth != 0 && ql2xmaxqdepth <= 0xffffU)
1883 req->max_q_depth = ql2xmaxqdepth;
1886 base_vha = qla2x00_create_host(sht, ha);
1888 qla_printk(KERN_WARNING, ha,
1889 "[ERROR] Failed to allocate memory for scsi_host\n");
1892 qla2x00_mem_free(ha);
1893 qla2x00_free_que(ha, req, rsp);
1894 goto probe_hw_failed;
1897 pci_set_drvdata(pdev, base_vha);
1899 qla2x00_config_dma_addressing(base_vha);
1901 host = base_vha->host;
1902 base_vha->req_ques[0] = req->id;
1903 host->can_queue = req->length + 128;
1904 if (IS_QLA2XXX_MIDTYPE(ha))
1905 base_vha->mgmt_svr_loop_id = 10 + base_vha->vp_idx;
1907 base_vha->mgmt_svr_loop_id = MANAGEMENT_SERVER +
1910 host->sg_tablesize = 32;
1911 host->max_id = max_id;
1912 host->this_id = 255;
1913 host->cmd_per_lun = 3;
1914 host->unique_id = host->host_no;
1915 host->max_cmd_len = MAX_CMDSZ;
1916 host->max_channel = MAX_BUSES - 1;
1917 host->max_lun = MAX_LUNS;
1918 host->transportt = qla2xxx_transport_template;
1920 /* Set up the irqs */
1921 ret = qla2x00_request_irqs(ha, rsp);
1923 goto probe_init_failed;
1924 /* Alloc arrays of request and response ring ptrs */
1925 if (!qla2x00_alloc_queues(ha)) {
1926 qla_printk(KERN_WARNING, ha,
1927 "[ERROR] Failed to allocate memory for queue"
1929 goto probe_init_failed;
1931 ha->rsp_q_map[0] = rsp;
1932 ha->req_q_map[0] = req;
1935 ha->isp_ops->wrt_req_reg = qla25xx_wrt_req_reg;
1936 ha->isp_ops->wrt_rsp_reg = qla25xx_wrt_rsp_reg;
1937 ha->isp_ops->rd_req_reg = qla25xx_rd_req_reg;
1940 if (qla2x00_initialize_adapter(base_vha)) {
1941 qla_printk(KERN_WARNING, ha,
1942 "Failed to initialize adapter\n");
1944 DEBUG2(printk("scsi(%ld): Failed to initialize adapter - "
1945 "Adapter flags %x.\n",
1946 base_vha->host_no, base_vha->device_flags));
1953 * Startup the kernel thread for this host adapter
1955 ha->dpc_thread = kthread_create(qla2x00_do_dpc, ha,
1956 "%s_dpc", base_vha->host_str);
1957 if (IS_ERR(ha->dpc_thread)) {
1958 qla_printk(KERN_WARNING, ha,
1959 "Unable to start DPC thread!\n");
1960 ret = PTR_ERR(ha->dpc_thread);
1964 list_add_tail(&base_vha->list, &ha->vp_list);
1965 base_vha->host->irq = ha->pdev->irq;
1967 /* Initialized the timer */
1968 qla2x00_start_timer(base_vha, qla2x00_timer, WATCH_INTERVAL);
1970 DEBUG2(printk("DEBUG: detect hba %ld at address = %p\n",
1971 base_vha->host_no, ha));
1973 base_vha->flags.init_done = 1;
1974 base_vha->flags.online = 1;
1976 ret = scsi_add_host(host, &pdev->dev);
1980 ha->isp_ops->enable_intrs(ha);
1982 scsi_scan_host(host);
1984 qla2x00_alloc_sysfs_attr(base_vha);
1986 qla2x00_init_host_attr(base_vha);
1988 qla2x00_dfs_setup(base_vha);
1990 qla_printk(KERN_INFO, ha, "\n"
1991 " QLogic Fibre Channel HBA Driver: %s\n"
1993 " ISP%04X: %s @ %s hdma%c, host#=%ld, fw=%s\n",
1994 qla2x00_version_str, ha->model_number,
1995 ha->model_desc ? ha->model_desc : "", pdev->device,
1996 ha->isp_ops->pci_info_str(base_vha, pci_info), pci_name(pdev),
1997 ha->flags.enable_64bit_addressing ? '+' : '-', base_vha->host_no,
1998 ha->isp_ops->fw_version_str(base_vha, fw_str));
2003 qla2x00_free_que(ha, req, rsp);
2007 qla2x00_free_device(base_vha);
2009 scsi_host_put(base_vha->host);
2013 iounmap(ha->iobase);
2015 pci_release_selected_regions(ha->pdev, ha->bars);
2020 pci_disable_device(pdev);
2025 qla2x00_remove_one(struct pci_dev *pdev)
2027 scsi_qla_host_t *base_vha, *vha, *temp;
2028 struct qla_hw_data *ha;
2030 base_vha = pci_get_drvdata(pdev);
2033 list_for_each_entry_safe(vha, temp, &ha->vp_list, list) {
2034 if (vha && vha->fc_vport)
2035 fc_vport_terminate(vha->fc_vport);
2038 set_bit(UNLOADING, &base_vha->dpc_flags);
2040 qla2x00_dfs_remove(base_vha);
2042 qla84xx_put_chip(base_vha);
2044 qla2x00_free_sysfs_attr(base_vha);
2046 fc_remove_host(base_vha->host);
2048 scsi_remove_host(base_vha->host);
2050 qla2x00_free_device(base_vha);
2052 scsi_host_put(base_vha->host);
2055 iounmap(ha->iobase);
2058 iounmap(ha->mqiobase);
2060 pci_release_selected_regions(ha->pdev, ha->bars);
2064 pci_disable_device(pdev);
2065 pci_set_drvdata(pdev, NULL);
2069 qla2x00_free_device(scsi_qla_host_t *vha)
2071 struct qla_hw_data *ha = vha->hw;
2072 qla2x00_abort_all_cmds(vha, DID_NO_CONNECT << 16);
2075 if (vha->timer_active)
2076 qla2x00_stop_timer(vha);
2078 vha->flags.online = 0;
2080 /* Kill the kernel thread for this host */
2081 if (ha->dpc_thread) {
2082 struct task_struct *t = ha->dpc_thread;
2085 * qla2xxx_wake_dpc checks for ->dpc_thread
2086 * so we need to zero it out.
2088 ha->dpc_thread = NULL;
2092 if (ha->flags.fce_enabled)
2093 qla2x00_disable_fce_trace(vha, NULL, NULL);
2096 qla2x00_disable_eft_trace(vha);
2098 /* Stop currently executing firmware. */
2099 qla2x00_try_to_stop_firmware(vha);
2101 /* turn-off interrupts on the card */
2102 if (ha->interrupts_on)
2103 ha->isp_ops->disable_intrs(ha);
2105 qla2x00_free_irqs(vha);
2107 qla2x00_mem_free(ha);
2109 qla2x00_free_queues(ha);
2113 qla2x00_schedule_rport_del(struct scsi_qla_host *vha, fc_port_t *fcport,
2116 struct fc_rport *rport;
2121 rport = fcport->rport;
2123 spin_lock_irq(vha->host->host_lock);
2124 fcport->drport = rport;
2125 spin_unlock_irq(vha->host->host_lock);
2126 set_bit(FCPORT_UPDATE_NEEDED, &vha->dpc_flags);
2127 qla2xxx_wake_dpc(vha);
2129 fc_remote_port_delete(rport);
2133 * qla2x00_mark_device_lost Updates fcport state when device goes offline.
2135 * Input: ha = adapter block pointer. fcport = port structure pointer.
2141 void qla2x00_mark_device_lost(scsi_qla_host_t *vha, fc_port_t *fcport,
2142 int do_login, int defer)
2144 if (atomic_read(&fcport->state) == FCS_ONLINE &&
2145 vha->vp_idx == fcport->vp_idx) {
2146 atomic_set(&fcport->state, FCS_DEVICE_LOST);
2147 qla2x00_schedule_rport_del(vha, fcport, defer);
2150 * We may need to retry the login, so don't change the state of the
2151 * port but do the retries.
2153 if (atomic_read(&fcport->state) != FCS_DEVICE_DEAD)
2154 atomic_set(&fcport->state, FCS_DEVICE_LOST);
2159 if (fcport->login_retry == 0) {
2160 fcport->login_retry = vha->hw->login_retry_count;
2161 set_bit(RELOGIN_NEEDED, &vha->dpc_flags);
2163 DEBUG(printk("scsi(%ld): Port login retry: "
2164 "%02x%02x%02x%02x%02x%02x%02x%02x, "
2165 "id = 0x%04x retry cnt=%d\n",
2167 fcport->port_name[0],
2168 fcport->port_name[1],
2169 fcport->port_name[2],
2170 fcport->port_name[3],
2171 fcport->port_name[4],
2172 fcport->port_name[5],
2173 fcport->port_name[6],
2174 fcport->port_name[7],
2176 fcport->login_retry));
2181 * qla2x00_mark_all_devices_lost
2182 * Updates fcport state when device goes offline.
2185 * ha = adapter block pointer.
2186 * fcport = port structure pointer.
2194 qla2x00_mark_all_devices_lost(scsi_qla_host_t *vha, int defer)
2198 list_for_each_entry(fcport, &vha->vp_fcports, list) {
2199 if (vha->vp_idx != fcport->vp_idx)
2202 * No point in marking the device as lost, if the device is
2205 if (atomic_read(&fcport->state) == FCS_DEVICE_DEAD)
2207 if (atomic_read(&fcport->state) == FCS_ONLINE) {
2208 atomic_set(&fcport->state, FCS_DEVICE_LOST);
2209 qla2x00_schedule_rport_del(vha, fcport, defer);
2211 atomic_set(&fcport->state, FCS_DEVICE_LOST);
2217 * Allocates adapter memory.
2224 qla2x00_mem_alloc(struct qla_hw_data *ha, uint16_t req_len, uint16_t rsp_len,
2225 struct req_que **req, struct rsp_que **rsp)
2229 ha->init_cb_size = sizeof(init_cb_t);
2230 if (IS_QLA2XXX_MIDTYPE(ha))
2231 ha->init_cb_size = sizeof(struct mid_init_cb_24xx);
2233 ha->init_cb = dma_alloc_coherent(&ha->pdev->dev, ha->init_cb_size,
2234 &ha->init_cb_dma, GFP_KERNEL);
2238 ha->gid_list = dma_alloc_coherent(&ha->pdev->dev, GID_LIST_SIZE,
2239 &ha->gid_list_dma, GFP_KERNEL);
2241 goto fail_free_init_cb;
2243 ha->srb_mempool = mempool_create_slab_pool(SRB_MIN_REQ, srb_cachep);
2244 if (!ha->srb_mempool)
2245 goto fail_free_gid_list;
2247 /* Get memory for cached NVRAM */
2248 ha->nvram = kzalloc(MAX_NVRAM_SIZE, GFP_KERNEL);
2250 goto fail_free_srb_mempool;
2252 snprintf(name, sizeof(name), "%s_%d", QLA2XXX_DRIVER_NAME,
2254 ha->s_dma_pool = dma_pool_create(name, &ha->pdev->dev,
2255 DMA_POOL_SIZE, 8, 0);
2256 if (!ha->s_dma_pool)
2257 goto fail_free_nvram;
2259 /* Allocate memory for SNS commands */
2260 if (IS_QLA2100(ha) || IS_QLA2200(ha)) {
2261 /* Get consistent memory allocated for SNS commands */
2262 ha->sns_cmd = dma_alloc_coherent(&ha->pdev->dev,
2263 sizeof(struct sns_cmd_pkt), &ha->sns_cmd_dma, GFP_KERNEL);
2267 /* Get consistent memory allocated for MS IOCB */
2268 ha->ms_iocb = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL,
2272 /* Get consistent memory allocated for CT SNS commands */
2273 ha->ct_sns = dma_alloc_coherent(&ha->pdev->dev,
2274 sizeof(struct ct_sns_pkt), &ha->ct_sns_dma, GFP_KERNEL);
2276 goto fail_free_ms_iocb;
2279 /* Allocate memory for request ring */
2280 *req = kzalloc(sizeof(struct req_que), GFP_KERNEL);
2282 DEBUG(printk("Unable to allocate memory for req\n"));
2285 (*req)->length = req_len;
2286 (*req)->ring = dma_alloc_coherent(&ha->pdev->dev,
2287 ((*req)->length + 1) * sizeof(request_t),
2288 &(*req)->dma, GFP_KERNEL);
2289 if (!(*req)->ring) {
2290 DEBUG(printk("Unable to allocate memory for req_ring\n"));
2293 /* Allocate memory for response ring */
2294 *rsp = kzalloc(sizeof(struct rsp_que), GFP_KERNEL);
2296 qla_printk(KERN_WARNING, ha,
2297 "Unable to allocate memory for rsp\n");
2301 (*rsp)->length = rsp_len;
2302 (*rsp)->ring = dma_alloc_coherent(&ha->pdev->dev,
2303 ((*rsp)->length + 1) * sizeof(response_t),
2304 &(*rsp)->dma, GFP_KERNEL);
2305 if (!(*rsp)->ring) {
2306 qla_printk(KERN_WARNING, ha,
2307 "Unable to allocate memory for rsp_ring\n");
2312 /* Allocate memory for NVRAM data for vports */
2313 if (ha->nvram_npiv_size) {
2314 ha->npiv_info = kzalloc(sizeof(struct qla_npiv_entry) *
2315 ha->nvram_npiv_size, GFP_KERNEL);
2316 if (!ha->npiv_info) {
2317 qla_printk(KERN_WARNING, ha,
2318 "Unable to allocate memory for npiv info\n");
2319 goto fail_npiv_info;
2322 ha->npiv_info = NULL;
2324 INIT_LIST_HEAD(&ha->vp_list);
2328 dma_free_coherent(&ha->pdev->dev, ((*rsp)->length + 1) *
2329 sizeof(response_t), (*rsp)->ring, (*rsp)->dma);
2330 (*rsp)->ring = NULL;
2335 dma_free_coherent(&ha->pdev->dev, ((*req)->length + 1) *
2336 sizeof(request_t), (*req)->ring, (*req)->dma);
2337 (*req)->ring = NULL;
2342 dma_free_coherent(&ha->pdev->dev, sizeof(struct ct_sns_pkt),
2343 ha->ct_sns, ha->ct_sns_dma);
2347 dma_pool_free(ha->s_dma_pool, ha->ms_iocb, ha->ms_iocb_dma);
2349 ha->ms_iocb_dma = 0;
2351 dma_pool_destroy(ha->s_dma_pool);
2352 ha->s_dma_pool = NULL;
2356 fail_free_srb_mempool:
2357 mempool_destroy(ha->srb_mempool);
2358 ha->srb_mempool = NULL;
2360 dma_free_coherent(&ha->pdev->dev, GID_LIST_SIZE, ha->gid_list,
2362 ha->gid_list = NULL;
2363 ha->gid_list_dma = 0;
2365 dma_free_coherent(&ha->pdev->dev, ha->init_cb_size, ha->init_cb,
2368 ha->init_cb_dma = 0;
2370 DEBUG(printk("%s: Memory allocation failure\n", __func__));
2376 * Frees all adapter allocated memory.
2379 * ha = adapter block pointer.
2382 qla2x00_mem_free(struct qla_hw_data *ha)
2384 if (ha->srb_mempool)
2385 mempool_destroy(ha->srb_mempool);
2388 dma_free_coherent(&ha->pdev->dev, FCE_SIZE, ha->fce,
2393 dma_free_coherent(&ha->pdev->dev,
2394 ntohl(ha->fw_dump->eft_size), ha->eft, ha->eft_dma);
2399 dma_free_coherent(&ha->pdev->dev, sizeof(struct sns_cmd_pkt),
2400 ha->sns_cmd, ha->sns_cmd_dma);
2403 dma_free_coherent(&ha->pdev->dev, sizeof(struct ct_sns_pkt),
2404 ha->ct_sns, ha->ct_sns_dma);
2407 dma_pool_free(ha->s_dma_pool, ha->sfp_data, ha->sfp_data_dma);
2410 dma_pool_free(ha->s_dma_pool, ha->ms_iocb, ha->ms_iocb_dma);
2413 dma_pool_destroy(ha->s_dma_pool);
2417 dma_free_coherent(&ha->pdev->dev, GID_LIST_SIZE, ha->gid_list,
2422 dma_free_coherent(&ha->pdev->dev, ha->init_cb_size,
2423 ha->init_cb, ha->init_cb_dma);
2424 vfree(ha->optrom_buffer);
2426 kfree(ha->npiv_info);
2428 ha->srb_mempool = NULL;
2432 ha->sns_cmd_dma = 0;
2436 ha->ms_iocb_dma = 0;
2438 ha->init_cb_dma = 0;
2440 ha->s_dma_pool = NULL;
2442 ha->gid_list = NULL;
2443 ha->gid_list_dma = 0;
2447 ha->fw_dump_reading = 0;
2450 struct scsi_qla_host *qla2x00_create_host(struct scsi_host_template *sht,
2451 struct qla_hw_data *ha)
2453 struct Scsi_Host *host;
2454 struct scsi_qla_host *vha = NULL;
2456 host = scsi_host_alloc(sht, sizeof(scsi_qla_host_t));
2459 "qla2xxx: Couldn't allocate host from scsi layer!\n");
2463 /* Clear our data area */
2464 vha = shost_priv(host);
2465 memset(vha, 0, sizeof(scsi_qla_host_t));
2468 vha->host_no = host->host_no;
2471 INIT_LIST_HEAD(&vha->vp_fcports);
2472 INIT_LIST_HEAD(&vha->work_list);
2473 INIT_LIST_HEAD(&vha->list);
2475 sprintf(vha->host_str, "%s_%ld", QLA2XXX_DRIVER_NAME, vha->host_no);
2482 static struct qla_work_evt *
2483 qla2x00_alloc_work(struct scsi_qla_host *vha, enum qla_work_type type,
2486 struct qla_work_evt *e;
2488 e = kzalloc(sizeof(struct qla_work_evt), locked ? GFP_ATOMIC:
2493 INIT_LIST_HEAD(&e->list);
2495 e->flags = QLA_EVT_FLAG_FREE;
2500 qla2x00_post_work(struct scsi_qla_host *vha, struct qla_work_evt *e, int locked)
2502 unsigned long uninitialized_var(flags);
2503 struct qla_hw_data *ha = vha->hw;
2506 spin_lock_irqsave(&ha->hardware_lock, flags);
2507 list_add_tail(&e->list, &vha->work_list);
2508 qla2xxx_wake_dpc(vha);
2510 spin_unlock_irqrestore(&ha->hardware_lock, flags);
2515 qla2x00_post_aen_work(struct scsi_qla_host *vha, enum fc_host_event_code code,
2518 struct qla_work_evt *e;
2520 e = qla2x00_alloc_work(vha, QLA_EVT_AEN, 1);
2522 return QLA_FUNCTION_FAILED;
2524 e->u.aen.code = code;
2525 e->u.aen.data = data;
2526 return qla2x00_post_work(vha, e, 1);
2530 qla2x00_do_work(struct scsi_qla_host *vha)
2532 struct qla_work_evt *e;
2533 struct qla_hw_data *ha = vha->hw;
2535 spin_lock_irq(&ha->hardware_lock);
2536 while (!list_empty(&vha->work_list)) {
2537 e = list_entry(vha->work_list.next, struct qla_work_evt, list);
2538 list_del_init(&e->list);
2539 spin_unlock_irq(&ha->hardware_lock);
2543 fc_host_post_event(vha->host, fc_get_event_number(),
2544 e->u.aen.code, e->u.aen.data);
2547 if (e->flags & QLA_EVT_FLAG_FREE)
2549 spin_lock_irq(&ha->hardware_lock);
2551 spin_unlock_irq(&ha->hardware_lock);
2553 /* Relogins all the fcports of a vport
2554 * Context: dpc thread
2556 void qla2x00_relogin(struct scsi_qla_host *vha)
2560 uint16_t next_loopid = 0;
2561 struct qla_hw_data *ha = vha->hw;
2563 list_for_each_entry(fcport, &vha->vp_fcports, list) {
2565 * If the port is not ONLINE then try to login
2566 * to it if we haven't run out of retries.
2568 if (atomic_read(&fcport->state) !=
2569 FCS_ONLINE && fcport->login_retry) {
2571 if (fcport->flags & FCF_FABRIC_DEVICE) {
2572 if (fcport->flags & FCF_TAPE_PRESENT)
2573 ha->isp_ops->fabric_logout(vha,
2575 fcport->d_id.b.domain,
2576 fcport->d_id.b.area,
2577 fcport->d_id.b.al_pa);
2579 status = qla2x00_fabric_login(vha, fcport,
2582 status = qla2x00_local_device_login(vha,
2585 fcport->login_retry--;
2586 if (status == QLA_SUCCESS) {
2587 fcport->old_loop_id = fcport->loop_id;
2589 DEBUG(printk("scsi(%ld): port login OK: logged "
2590 "in ID 0x%x\n", vha->host_no, fcport->loop_id));
2592 qla2x00_update_fcport(vha, fcport);
2594 } else if (status == 1) {
2595 set_bit(RELOGIN_NEEDED, &vha->dpc_flags);
2596 /* retry the login again */
2597 DEBUG(printk("scsi(%ld): Retrying"
2598 " %d login again loop_id 0x%x\n",
2599 vha->host_no, fcport->login_retry,
2602 fcport->login_retry = 0;
2605 if (fcport->login_retry == 0 && status != QLA_SUCCESS)
2606 fcport->loop_id = FC_NO_LOOP_ID;
2608 if (test_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags))
2613 /**************************************************************************
2615 * This kernel thread is a task that is schedule by the interrupt handler
2616 * to perform the background processing for interrupts.
2619 * This task always run in the context of a kernel thread. It
2620 * is kick-off by the driver's detect code and starts up
2621 * up one per adapter. It immediately goes to sleep and waits for
2622 * some fibre event. When either the interrupt handler or
2623 * the timer routine detects a event it will one of the task
2624 * bits then wake us up.
2625 **************************************************************************/
2627 qla2x00_do_dpc(void *data)
2630 scsi_qla_host_t *base_vha;
2631 struct qla_hw_data *ha;
2633 ha = (struct qla_hw_data *)data;
2634 base_vha = pci_get_drvdata(ha->pdev);
2636 set_user_nice(current, -20);
2638 while (!kthread_should_stop()) {
2639 DEBUG3(printk("qla2x00: DPC handler sleeping\n"));
2641 set_current_state(TASK_INTERRUPTIBLE);
2643 __set_current_state(TASK_RUNNING);
2645 DEBUG3(printk("qla2x00: DPC handler waking up\n"));
2647 /* Initialization not yet finished. Don't do anything yet. */
2648 if (!base_vha->flags.init_done)
2651 DEBUG3(printk("scsi(%ld): DPC handler\n", base_vha->host_no));
2655 if (ha->flags.mbox_busy) {
2660 qla2x00_do_work(base_vha);
2662 if (test_and_clear_bit(ISP_ABORT_NEEDED,
2663 &base_vha->dpc_flags)) {
2665 DEBUG(printk("scsi(%ld): dpc: sched "
2666 "qla2x00_abort_isp ha = %p\n",
2667 base_vha->host_no, ha));
2668 if (!(test_and_set_bit(ABORT_ISP_ACTIVE,
2669 &base_vha->dpc_flags))) {
2671 if (qla2x00_abort_isp(base_vha)) {
2672 /* failed. retry later */
2673 set_bit(ISP_ABORT_NEEDED,
2674 &base_vha->dpc_flags);
2676 clear_bit(ABORT_ISP_ACTIVE,
2677 &base_vha->dpc_flags);
2680 DEBUG(printk("scsi(%ld): dpc: qla2x00_abort_isp end\n",
2681 base_vha->host_no));
2684 if (test_bit(FCPORT_UPDATE_NEEDED, &base_vha->dpc_flags)) {
2685 qla2x00_update_fcports(base_vha);
2686 clear_bit(FCPORT_UPDATE_NEEDED, &base_vha->dpc_flags);
2689 if (test_and_clear_bit(RESET_MARKER_NEEDED,
2690 &base_vha->dpc_flags) &&
2691 (!(test_and_set_bit(RESET_ACTIVE, &base_vha->dpc_flags)))) {
2693 DEBUG(printk("scsi(%ld): qla2x00_reset_marker()\n",
2694 base_vha->host_no));
2696 qla2x00_rst_aen(base_vha);
2697 clear_bit(RESET_ACTIVE, &base_vha->dpc_flags);
2700 /* Retry each device up to login retry count */
2701 if ((test_and_clear_bit(RELOGIN_NEEDED,
2702 &base_vha->dpc_flags)) &&
2703 !test_bit(LOOP_RESYNC_NEEDED, &base_vha->dpc_flags) &&
2704 atomic_read(&base_vha->loop_state) != LOOP_DOWN) {
2706 DEBUG(printk("scsi(%ld): qla2x00_port_login()\n",
2707 base_vha->host_no));
2708 qla2x00_relogin(base_vha);
2710 DEBUG(printk("scsi(%ld): qla2x00_port_login - end\n",
2711 base_vha->host_no));
2714 if (test_and_clear_bit(LOOP_RESYNC_NEEDED,
2715 &base_vha->dpc_flags)) {
2717 DEBUG(printk("scsi(%ld): qla2x00_loop_resync()\n",
2718 base_vha->host_no));
2720 if (!(test_and_set_bit(LOOP_RESYNC_ACTIVE,
2721 &base_vha->dpc_flags))) {
2723 rval = qla2x00_loop_resync(base_vha);
2725 clear_bit(LOOP_RESYNC_ACTIVE,
2726 &base_vha->dpc_flags);
2729 DEBUG(printk("scsi(%ld): qla2x00_loop_resync - end\n",
2730 base_vha->host_no));
2733 if (test_bit(NPIV_CONFIG_NEEDED, &base_vha->dpc_flags) &&
2734 atomic_read(&base_vha->loop_state) == LOOP_READY) {
2735 clear_bit(NPIV_CONFIG_NEEDED, &base_vha->dpc_flags);
2736 qla2xxx_flash_npiv_conf(base_vha);
2739 if (!ha->interrupts_on)
2740 ha->isp_ops->enable_intrs(ha);
2742 if (test_and_clear_bit(BEACON_BLINK_NEEDED,
2743 &base_vha->dpc_flags))
2744 ha->isp_ops->beacon_blink(base_vha);
2746 qla2x00_do_dpc_all_vps(base_vha);
2749 } /* End of while(1) */
2751 DEBUG(printk("scsi(%ld): DPC handler exiting\n", base_vha->host_no));
2754 * Make sure that nobody tries to wake us up again.
2762 qla2xxx_wake_dpc(struct scsi_qla_host *vha)
2764 struct qla_hw_data *ha = vha->hw;
2765 struct task_struct *t = ha->dpc_thread;
2767 if (!test_bit(UNLOADING, &vha->dpc_flags) && t)
2773 * Processes asynchronous reset.
2776 * ha = adapter block pointer.
2779 qla2x00_rst_aen(scsi_qla_host_t *vha)
2781 if (vha->flags.online && !vha->flags.reset_active &&
2782 !atomic_read(&vha->loop_down_timer) &&
2783 !(test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags))) {
2785 clear_bit(RESET_MARKER_NEEDED, &vha->dpc_flags);
2788 * Issue marker command only when we are going to start
2791 vha->marker_needed = 1;
2792 } while (!atomic_read(&vha->loop_down_timer) &&
2793 (test_bit(RESET_MARKER_NEEDED, &vha->dpc_flags)));
2798 qla2x00_sp_free_dma(srb_t *sp)
2800 struct scsi_cmnd *cmd = sp->cmd;
2802 if (sp->flags & SRB_DMA_VALID) {
2803 scsi_dma_unmap(cmd);
2804 sp->flags &= ~SRB_DMA_VALID;
2810 qla2x00_sp_compl(struct qla_hw_data *ha, srb_t *sp)
2812 struct scsi_cmnd *cmd = sp->cmd;
2814 qla2x00_sp_free_dma(sp);
2816 mempool_free(sp, ha->srb_mempool);
2818 cmd->scsi_done(cmd);
2821 /**************************************************************************
2827 * Context: Interrupt
2828 ***************************************************************************/
2830 qla2x00_timer(scsi_qla_host_t *vha)
2832 unsigned long cpu_flags = 0;
2838 struct qla_hw_data *ha = vha->hw;
2839 struct req_que *req;
2841 * Ports - Port down timer.
2843 * Whenever, a port is in the LOST state we start decrementing its port
2844 * down timer every second until it reaches zero. Once it reaches zero
2845 * the port it marked DEAD.
2848 list_for_each_entry(fcport, &vha->vp_fcports, list) {
2849 if (fcport->port_type != FCT_TARGET)
2852 if (atomic_read(&fcport->state) == FCS_DEVICE_LOST) {
2854 if (atomic_read(&fcport->port_down_timer) == 0)
2857 if (atomic_dec_and_test(&fcport->port_down_timer) != 0)
2858 atomic_set(&fcport->state, FCS_DEVICE_DEAD);
2860 DEBUG(printk("scsi(%ld): fcport-%d - port retry count: "
2863 t, atomic_read(&fcport->port_down_timer)));
2866 } /* End of for fcport */
2869 /* Loop down handler. */
2870 if (atomic_read(&vha->loop_down_timer) > 0 &&
2871 !(test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags))
2872 && vha->flags.online) {
2874 if (atomic_read(&vha->loop_down_timer) ==
2875 vha->loop_down_abort_time) {
2877 DEBUG(printk("scsi(%ld): Loop Down - aborting the "
2878 "queues before time expire\n",
2881 if (!IS_QLA2100(ha) && vha->link_down_timeout)
2882 atomic_set(&vha->loop_state, LOOP_DEAD);
2884 /* Schedule an ISP abort to return any tape commands. */
2885 /* NPIV - scan physical port only */
2887 spin_lock_irqsave(&ha->hardware_lock,
2889 req = ha->req_q_map[0];
2891 index < MAX_OUTSTANDING_COMMANDS;
2895 sp = req->outstanding_cmds[index];
2899 if (!(sfcp->flags & FCF_TAPE_PRESENT))
2902 set_bit(ISP_ABORT_NEEDED,
2906 spin_unlock_irqrestore(&ha->hardware_lock,
2909 set_bit(ABORT_QUEUES_NEEDED, &vha->dpc_flags);
2913 /* if the loop has been down for 4 minutes, reinit adapter */
2914 if (atomic_dec_and_test(&vha->loop_down_timer) != 0) {
2915 DEBUG(printk("scsi(%ld): Loop down exceed 4 mins - "
2916 "restarting queues.\n",
2919 set_bit(RESTART_QUEUES_NEEDED, &vha->dpc_flags);
2922 if (!(vha->device_flags & DFLG_NO_CABLE) &&
2924 DEBUG(printk("scsi(%ld): Loop down - "
2927 qla_printk(KERN_WARNING, ha,
2928 "Loop down - aborting ISP.\n");
2930 set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
2933 DEBUG3(printk("scsi(%ld): Loop Down - seconds remaining %d\n",
2935 atomic_read(&vha->loop_down_timer)));
2938 /* Check if beacon LED needs to be blinked */
2939 if (ha->beacon_blink_led == 1) {
2940 set_bit(BEACON_BLINK_NEEDED, &vha->dpc_flags);
2944 /* Process any deferred work. */
2945 if (!list_empty(&vha->work_list))
2948 /* Schedule the DPC routine if needed */
2949 if ((test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags) ||
2950 test_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags) ||
2951 test_bit(FCPORT_UPDATE_NEEDED, &vha->dpc_flags) ||
2953 test_bit(RESET_MARKER_NEEDED, &vha->dpc_flags) ||
2954 test_bit(BEACON_BLINK_NEEDED, &vha->dpc_flags) ||
2955 test_bit(VP_DPC_NEEDED, &vha->dpc_flags) ||
2956 test_bit(RELOGIN_NEEDED, &vha->dpc_flags)))
2957 qla2xxx_wake_dpc(vha);
2959 qla2x00_restart_timer(vha, WATCH_INTERVAL);
2962 /* Firmware interface routines. */
2965 #define FW_ISP21XX 0
2966 #define FW_ISP22XX 1
2967 #define FW_ISP2300 2
2968 #define FW_ISP2322 3
2969 #define FW_ISP24XX 4
2970 #define FW_ISP25XX 5
2971 #define FW_ISP81XX 6
2973 #define FW_FILE_ISP21XX "ql2100_fw.bin"
2974 #define FW_FILE_ISP22XX "ql2200_fw.bin"
2975 #define FW_FILE_ISP2300 "ql2300_fw.bin"
2976 #define FW_FILE_ISP2322 "ql2322_fw.bin"
2977 #define FW_FILE_ISP24XX "ql2400_fw.bin"
2978 #define FW_FILE_ISP25XX "ql2500_fw.bin"
2979 #define FW_FILE_ISP81XX "ql8100_fw.bin"
2981 static DEFINE_MUTEX(qla_fw_lock);
2983 static struct fw_blob qla_fw_blobs[FW_BLOBS] = {
2984 { .name = FW_FILE_ISP21XX, .segs = { 0x1000, 0 }, },
2985 { .name = FW_FILE_ISP22XX, .segs = { 0x1000, 0 }, },
2986 { .name = FW_FILE_ISP2300, .segs = { 0x800, 0 }, },
2987 { .name = FW_FILE_ISP2322, .segs = { 0x800, 0x1c000, 0x1e000, 0 }, },
2988 { .name = FW_FILE_ISP24XX, },
2989 { .name = FW_FILE_ISP25XX, },
2990 { .name = FW_FILE_ISP81XX, },
2994 qla2x00_request_firmware(scsi_qla_host_t *vha)
2996 struct qla_hw_data *ha = vha->hw;
2997 struct fw_blob *blob;
3000 if (IS_QLA2100(ha)) {
3001 blob = &qla_fw_blobs[FW_ISP21XX];
3002 } else if (IS_QLA2200(ha)) {
3003 blob = &qla_fw_blobs[FW_ISP22XX];
3004 } else if (IS_QLA2300(ha) || IS_QLA2312(ha) || IS_QLA6312(ha)) {
3005 blob = &qla_fw_blobs[FW_ISP2300];
3006 } else if (IS_QLA2322(ha) || IS_QLA6322(ha)) {
3007 blob = &qla_fw_blobs[FW_ISP2322];
3008 } else if (IS_QLA24XX_TYPE(ha)) {
3009 blob = &qla_fw_blobs[FW_ISP24XX];
3010 } else if (IS_QLA25XX(ha)) {
3011 blob = &qla_fw_blobs[FW_ISP25XX];
3012 } else if (IS_QLA81XX(ha)) {
3013 blob = &qla_fw_blobs[FW_ISP81XX];
3016 mutex_lock(&qla_fw_lock);
3020 if (request_firmware(&blob->fw, blob->name, &ha->pdev->dev)) {
3021 DEBUG2(printk("scsi(%ld): Failed to load firmware image "
3022 "(%s).\n", vha->host_no, blob->name));
3029 mutex_unlock(&qla_fw_lock);
3034 qla2x00_release_firmware(void)
3038 mutex_lock(&qla_fw_lock);
3039 for (idx = 0; idx < FW_BLOBS; idx++)
3040 if (qla_fw_blobs[idx].fw)
3041 release_firmware(qla_fw_blobs[idx].fw);
3042 mutex_unlock(&qla_fw_lock);
3045 static pci_ers_result_t
3046 qla2xxx_pci_error_detected(struct pci_dev *pdev, pci_channel_state_t state)
3049 case pci_channel_io_normal:
3050 return PCI_ERS_RESULT_CAN_RECOVER;
3051 case pci_channel_io_frozen:
3052 pci_disable_device(pdev);
3053 return PCI_ERS_RESULT_NEED_RESET;
3054 case pci_channel_io_perm_failure:
3055 qla2x00_remove_one(pdev);
3056 return PCI_ERS_RESULT_DISCONNECT;
3058 return PCI_ERS_RESULT_NEED_RESET;
3061 static pci_ers_result_t
3062 qla2xxx_pci_mmio_enabled(struct pci_dev *pdev)
3064 int risc_paused = 0;
3066 unsigned long flags;
3067 scsi_qla_host_t *base_vha = pci_get_drvdata(pdev);
3068 struct qla_hw_data *ha = base_vha->hw;
3069 struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
3070 struct device_reg_24xx __iomem *reg24 = &ha->iobase->isp24;
3072 spin_lock_irqsave(&ha->hardware_lock, flags);
3073 if (IS_QLA2100(ha) || IS_QLA2200(ha)){
3074 stat = RD_REG_DWORD(®->hccr);
3075 if (stat & HCCR_RISC_PAUSE)
3077 } else if (IS_QLA23XX(ha)) {
3078 stat = RD_REG_DWORD(®->u.isp2300.host_status);
3079 if (stat & HSR_RISC_PAUSED)
3081 } else if (IS_FWI2_CAPABLE(ha)) {
3082 stat = RD_REG_DWORD(®24->host_status);
3083 if (stat & HSRX_RISC_PAUSED)
3086 spin_unlock_irqrestore(&ha->hardware_lock, flags);
3089 qla_printk(KERN_INFO, ha, "RISC paused -- mmio_enabled, "
3090 "Dumping firmware!\n");
3091 ha->isp_ops->fw_dump(base_vha, 0);
3093 return PCI_ERS_RESULT_NEED_RESET;
3095 return PCI_ERS_RESULT_RECOVERED;
3098 static pci_ers_result_t
3099 qla2xxx_pci_slot_reset(struct pci_dev *pdev)
3101 pci_ers_result_t ret = PCI_ERS_RESULT_DISCONNECT;
3102 scsi_qla_host_t *base_vha = pci_get_drvdata(pdev);
3103 struct qla_hw_data *ha = base_vha->hw;
3107 rc = pci_enable_device_mem(pdev);
3109 rc = pci_enable_device(pdev);
3112 qla_printk(KERN_WARNING, ha,
3113 "Can't re-enable PCI device after reset.\n");
3117 pci_set_master(pdev);
3119 if (ha->isp_ops->pci_config(base_vha))
3122 set_bit(ABORT_ISP_ACTIVE, &base_vha->dpc_flags);
3123 if (qla2x00_abort_isp(base_vha) == QLA_SUCCESS)
3124 ret = PCI_ERS_RESULT_RECOVERED;
3125 clear_bit(ABORT_ISP_ACTIVE, &base_vha->dpc_flags);
3131 qla2xxx_pci_resume(struct pci_dev *pdev)
3133 scsi_qla_host_t *base_vha = pci_get_drvdata(pdev);
3134 struct qla_hw_data *ha = base_vha->hw;
3137 ret = qla2x00_wait_for_hba_online(base_vha);
3138 if (ret != QLA_SUCCESS) {
3139 qla_printk(KERN_ERR, ha,
3140 "the device failed to resume I/O "
3141 "from slot/link_reset");
3143 pci_cleanup_aer_uncorrect_error_status(pdev);
3146 static struct pci_error_handlers qla2xxx_err_handler = {
3147 .error_detected = qla2xxx_pci_error_detected,
3148 .mmio_enabled = qla2xxx_pci_mmio_enabled,
3149 .slot_reset = qla2xxx_pci_slot_reset,
3150 .resume = qla2xxx_pci_resume,
3153 static struct pci_device_id qla2xxx_pci_tbl[] = {
3154 { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2100) },
3155 { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2200) },
3156 { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2300) },
3157 { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2312) },
3158 { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2322) },
3159 { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP6312) },
3160 { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP6322) },
3161 { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2422) },
3162 { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2432) },
3163 { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP8432) },
3164 { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP5422) },
3165 { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP5432) },
3166 { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2532) },
3167 { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP8001) },
3170 MODULE_DEVICE_TABLE(pci, qla2xxx_pci_tbl);
3172 static struct pci_driver qla2xxx_pci_driver = {
3173 .name = QLA2XXX_DRIVER_NAME,
3175 .owner = THIS_MODULE,
3177 .id_table = qla2xxx_pci_tbl,
3178 .probe = qla2x00_probe_one,
3179 .remove = qla2x00_remove_one,
3180 .err_handler = &qla2xxx_err_handler,
3184 * qla2x00_module_init - Module initialization.
3187 qla2x00_module_init(void)
3191 /* Allocate cache for SRBs. */
3192 srb_cachep = kmem_cache_create("qla2xxx_srbs", sizeof(srb_t), 0,
3193 SLAB_HWCACHE_ALIGN, NULL);
3194 if (srb_cachep == NULL) {
3196 "qla2xxx: Unable to allocate SRB cache...Failing load!\n");
3200 /* Derive version string. */
3201 strcpy(qla2x00_version_str, QLA2XXX_VERSION);
3202 if (ql2xextended_error_logging)
3203 strcat(qla2x00_version_str, "-debug");
3205 qla2xxx_transport_template =
3206 fc_attach_transport(&qla2xxx_transport_functions);
3207 if (!qla2xxx_transport_template) {
3208 kmem_cache_destroy(srb_cachep);
3211 qla2xxx_transport_vport_template =
3212 fc_attach_transport(&qla2xxx_transport_vport_functions);
3213 if (!qla2xxx_transport_vport_template) {
3214 kmem_cache_destroy(srb_cachep);
3215 fc_release_transport(qla2xxx_transport_template);
3219 printk(KERN_INFO "QLogic Fibre Channel HBA Driver: %s\n",
3220 qla2x00_version_str);
3221 ret = pci_register_driver(&qla2xxx_pci_driver);
3223 kmem_cache_destroy(srb_cachep);
3224 fc_release_transport(qla2xxx_transport_template);
3225 fc_release_transport(qla2xxx_transport_vport_template);
3231 * qla2x00_module_exit - Module cleanup.
3234 qla2x00_module_exit(void)
3236 pci_unregister_driver(&qla2xxx_pci_driver);
3237 qla2x00_release_firmware();
3238 kmem_cache_destroy(srb_cachep);
3239 fc_release_transport(qla2xxx_transport_template);
3240 fc_release_transport(qla2xxx_transport_vport_template);
3243 module_init(qla2x00_module_init);
3244 module_exit(qla2x00_module_exit);
3246 MODULE_AUTHOR("QLogic Corporation");
3247 MODULE_DESCRIPTION("QLogic Fibre Channel HBA Driver");
3248 MODULE_LICENSE("GPL");
3249 MODULE_VERSION(QLA2XXX_VERSION);
3250 MODULE_FIRMWARE(FW_FILE_ISP21XX);
3251 MODULE_FIRMWARE(FW_FILE_ISP22XX);
3252 MODULE_FIRMWARE(FW_FILE_ISP2300);
3253 MODULE_FIRMWARE(FW_FILE_ISP2322);
3254 MODULE_FIRMWARE(FW_FILE_ISP24XX);
3255 MODULE_FIRMWARE(FW_FILE_ISP25XX);
3256 MODULE_FIRMWARE(FW_FILE_ISP81XX);