]> www.pilppa.org Git - linux-2.6-omap-h63xx.git/blob - drivers/net/wireless/libertas/if_cs.c
libertas: rename and re-type bufvirtualaddr to cmdbuf
[linux-2.6-omap-h63xx.git] / drivers / net / wireless / libertas / if_cs.c
1 /*
2
3   Driver for the Marvell 8385 based compact flash WLAN cards.
4
5   (C) 2007 by Holger Schurig <hs4233@mail.mn-solutions.de>
6
7   This program is free software; you can redistribute it and/or modify
8   it under the terms of the GNU General Public License as published by
9   the Free Software Foundation; either version 2 of the License, or
10   (at your option) any later version.
11
12   This program is distributed in the hope that it will be useful,
13   but WITHOUT ANY WARRANTY; without even the implied warranty of
14   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
15   GNU General Public License for more details.
16
17   You should have received a copy of the GNU General Public License
18   along with this program; see the file COPYING.  If not, write to
19   the Free Software Foundation, Inc., 51 Franklin Steet, Fifth Floor,
20   Boston, MA 02110-1301, USA.
21
22 */
23
24 #include <linux/module.h>
25 #include <linux/delay.h>
26 #include <linux/moduleparam.h>
27 #include <linux/firmware.h>
28 #include <linux/netdevice.h>
29
30 #include <pcmcia/cs_types.h>
31 #include <pcmcia/cs.h>
32 #include <pcmcia/cistpl.h>
33 #include <pcmcia/ds.h>
34
35 #include <linux/io.h>
36
37 #define DRV_NAME "libertas_cs"
38
39 #include "decl.h"
40 #include "defs.h"
41 #include "dev.h"
42
43
44 /********************************************************************/
45 /* Module stuff                                                     */
46 /********************************************************************/
47
48 MODULE_AUTHOR("Holger Schurig <hs4233@mail.mn-solutions.de>");
49 MODULE_DESCRIPTION("Driver for Marvell 83xx compact flash WLAN cards");
50 MODULE_LICENSE("GPL");
51
52
53
54 /********************************************************************/
55 /* Data structures                                                  */
56 /********************************************************************/
57
58 struct if_cs_card {
59         struct pcmcia_device *p_dev;
60         struct lbs_private *priv;
61         void __iomem *iobase;
62 };
63
64
65
66 /********************************************************************/
67 /* Hardware access                                                  */
68 /********************************************************************/
69
70 /* This define enables wrapper functions which allow you
71    to dump all register accesses. You normally won't this,
72    except for development */
73 /* #define DEBUG_IO */
74
75 #ifdef DEBUG_IO
76 static int debug_output = 0;
77 #else
78 /* This way the compiler optimizes the printk's away */
79 #define debug_output 0
80 #endif
81
82 static inline unsigned int if_cs_read8(struct if_cs_card *card, uint reg)
83 {
84         unsigned int val = ioread8(card->iobase + reg);
85         if (debug_output)
86                 printk(KERN_INFO "##inb %08x<%02x\n", reg, val);
87         return val;
88 }
89 static inline unsigned int if_cs_read16(struct if_cs_card *card, uint reg)
90 {
91         unsigned int val = ioread16(card->iobase + reg);
92         if (debug_output)
93                 printk(KERN_INFO "##inw %08x<%04x\n", reg, val);
94         return val;
95 }
96 static inline void if_cs_read16_rep(
97         struct if_cs_card *card,
98         uint reg,
99         void *buf,
100         unsigned long count)
101 {
102         if (debug_output)
103                 printk(KERN_INFO "##insw %08x<(0x%lx words)\n",
104                         reg, count);
105         ioread16_rep(card->iobase + reg, buf, count);
106 }
107
108 static inline void if_cs_write8(struct if_cs_card *card, uint reg, u8 val)
109 {
110         if (debug_output)
111                 printk(KERN_INFO "##outb %08x>%02x\n", reg, val);
112         iowrite8(val, card->iobase + reg);
113 }
114
115 static inline void if_cs_write16(struct if_cs_card *card, uint reg, u16 val)
116 {
117         if (debug_output)
118                 printk(KERN_INFO "##outw %08x>%04x\n", reg, val);
119         iowrite16(val, card->iobase + reg);
120 }
121
122 static inline void if_cs_write16_rep(
123         struct if_cs_card *card,
124         uint reg,
125         void *buf,
126         unsigned long count)
127 {
128         if (debug_output)
129                 printk(KERN_INFO "##outsw %08x>(0x%lx words)\n",
130                         reg, count);
131         iowrite16_rep(card->iobase + reg, buf, count);
132 }
133
134
135 /*
136  * I know that polling/delaying is frowned upon. However, this procedure
137  * with polling is needed while downloading the firmware. At this stage,
138  * the hardware does unfortunately not create any interrupts.
139  *
140  * Fortunately, this function is never used once the firmware is in
141  * the card. :-)
142  *
143  * As a reference, see the "Firmware Specification v5.1", page 18
144  * and 19. I did not follow their suggested timing to the word,
145  * but this works nice & fast anyway.
146  */
147 static int if_cs_poll_while_fw_download(struct if_cs_card *card, uint addr, u8 reg)
148 {
149         int i;
150
151         for (i = 0; i < 1000; i++) {
152                 u8 val = if_cs_read8(card, addr);
153                 if (val == reg)
154                         return i;
155                 udelay(500);
156         }
157         return -ETIME;
158 }
159
160
161
162 /* Host control registers and their bit definitions */
163
164 #define IF_CS_H_STATUS                  0x00000000
165 #define IF_CS_H_STATUS_TX_OVER          0x0001
166 #define IF_CS_H_STATUS_RX_OVER          0x0002
167 #define IF_CS_H_STATUS_DNLD_OVER        0x0004
168
169 #define IF_CS_H_INT_CAUSE               0x00000002
170 #define IF_CS_H_IC_TX_OVER              0x0001
171 #define IF_CS_H_IC_RX_OVER              0x0002
172 #define IF_CS_H_IC_DNLD_OVER            0x0004
173 #define IF_CS_H_IC_POWER_DOWN           0x0008
174 #define IF_CS_H_IC_HOST_EVENT           0x0010
175 #define IF_CS_H_IC_MASK                 0x001f
176
177 #define IF_CS_H_INT_MASK                0x00000004
178 #define IF_CS_H_IM_MASK                 0x001f
179
180 #define IF_CS_H_WRITE_LEN               0x00000014
181
182 #define IF_CS_H_WRITE                   0x00000016
183
184 #define IF_CS_H_CMD_LEN                 0x00000018
185
186 #define IF_CS_H_CMD                     0x0000001A
187
188 #define IF_CS_C_READ_LEN                0x00000024
189
190 #define IF_CS_H_READ                    0x00000010
191
192 /* Card control registers and their bit definitions */
193
194 #define IF_CS_C_STATUS                  0x00000020
195 #define IF_CS_C_S_TX_DNLD_RDY           0x0001
196 #define IF_CS_C_S_RX_UPLD_RDY           0x0002
197 #define IF_CS_C_S_CMD_DNLD_RDY          0x0004
198 #define IF_CS_C_S_CMD_UPLD_RDY          0x0008
199 #define IF_CS_C_S_CARDEVENT             0x0010
200 #define IF_CS_C_S_MASK                  0x001f
201 #define IF_CS_C_S_STATUS_MASK           0x7f00
202 /* The following definitions should be the same as the MRVDRV_ ones */
203
204 #if MRVDRV_CMD_DNLD_RDY != IF_CS_C_S_CMD_DNLD_RDY
205 #error MRVDRV_CMD_DNLD_RDY and IF_CS_C_S_CMD_DNLD_RDY not in sync
206 #endif
207 #if MRVDRV_CMD_UPLD_RDY != IF_CS_C_S_CMD_UPLD_RDY
208 #error MRVDRV_CMD_UPLD_RDY and IF_CS_C_S_CMD_UPLD_RDY not in sync
209 #endif
210 #if MRVDRV_CARDEVENT != IF_CS_C_S_CARDEVENT
211 #error MRVDRV_CARDEVENT and IF_CS_C_S_CARDEVENT not in sync
212 #endif
213
214 #define IF_CS_C_INT_CAUSE               0x00000022
215 #define IF_CS_C_IC_MASK                 0x001f
216
217 #define IF_CS_C_SQ_READ_LOW             0x00000028
218 #define IF_CS_C_SQ_HELPER_OK            0x10
219
220 #define IF_CS_C_CMD_LEN                 0x00000030
221
222 #define IF_CS_C_CMD                     0x00000012
223
224 #define IF_CS_SCRATCH                   0x0000003F
225
226
227
228 /********************************************************************/
229 /* Interrupts                                                       */
230 /********************************************************************/
231
232 static inline void if_cs_enable_ints(struct if_cs_card *card)
233 {
234         lbs_deb_enter(LBS_DEB_CS);
235         if_cs_write16(card, IF_CS_H_INT_MASK, 0);
236 }
237
238 static inline void if_cs_disable_ints(struct if_cs_card *card)
239 {
240         lbs_deb_enter(LBS_DEB_CS);
241         if_cs_write16(card, IF_CS_H_INT_MASK, IF_CS_H_IM_MASK);
242 }
243
244 static irqreturn_t if_cs_interrupt(int irq, void *data)
245 {
246         struct if_cs_card *card = data;
247         u16 int_cause;
248
249         lbs_deb_enter(LBS_DEB_CS);
250
251         int_cause = if_cs_read16(card, IF_CS_C_INT_CAUSE);
252         if(int_cause == 0x0) {
253                 /* Not for us */
254                 return IRQ_NONE;
255
256         } else if (int_cause == 0xffff) {
257                 /* Read in junk, the card has probably been removed */
258                 card->priv->surpriseremoved = 1;
259
260         } else {
261                 if (int_cause & IF_CS_H_IC_TX_OVER)
262                         lbs_host_to_card_done(card->priv);
263
264                 /* clear interrupt */
265                 if_cs_write16(card, IF_CS_C_INT_CAUSE, int_cause & IF_CS_C_IC_MASK);
266         }
267         spin_lock(&card->priv->driver_lock);
268         lbs_interrupt(card->priv);
269         spin_unlock(&card->priv->driver_lock);
270
271         return IRQ_HANDLED;
272 }
273
274
275
276
277 /********************************************************************/
278 /* I/O                                                              */
279 /********************************************************************/
280
281 /*
282  * Called from if_cs_host_to_card to send a command to the hardware
283  */
284 static int if_cs_send_cmd(struct lbs_private *priv, u8 *buf, u16 nb)
285 {
286         struct if_cs_card *card = (struct if_cs_card *)priv->card;
287         int ret = -1;
288         int loops = 0;
289
290         lbs_deb_enter(LBS_DEB_CS);
291
292         /* Is hardware ready? */
293         while (1) {
294                 u16 val = if_cs_read16(card, IF_CS_C_STATUS);
295                 if (val & IF_CS_C_S_CMD_DNLD_RDY)
296                         break;
297                 if (++loops > 100) {
298                         lbs_pr_err("card not ready for commands\n");
299                         goto done;
300                 }
301                 mdelay(1);
302         }
303
304         if_cs_write16(card, IF_CS_H_CMD_LEN, nb);
305
306         if_cs_write16_rep(card, IF_CS_H_CMD, buf, nb / 2);
307         /* Are we supposed to transfer an odd amount of bytes? */
308         if (nb & 1)
309                 if_cs_write8(card, IF_CS_H_CMD, buf[nb-1]);
310
311         /* "Assert the download over interrupt command in the Host
312          * status register" */
313         if_cs_write16(card, IF_CS_H_STATUS, IF_CS_H_STATUS_DNLD_OVER);
314
315         /* "Assert the download over interrupt command in the Card
316          * interrupt case register" */
317         if_cs_write16(card, IF_CS_H_INT_CAUSE, IF_CS_H_IC_DNLD_OVER);
318         ret = 0;
319
320 done:
321         lbs_deb_leave_args(LBS_DEB_CS, "ret %d", ret);
322         return ret;
323 }
324
325
326 /*
327  * Called from if_cs_host_to_card to send a data to the hardware
328  */
329 static void if_cs_send_data(struct lbs_private *priv, u8 *buf, u16 nb)
330 {
331         struct if_cs_card *card = (struct if_cs_card *)priv->card;
332
333         lbs_deb_enter(LBS_DEB_CS);
334
335         if_cs_write16(card, IF_CS_H_WRITE_LEN, nb);
336
337         /* write even number of bytes, then odd byte if necessary */
338         if_cs_write16_rep(card, IF_CS_H_WRITE, buf, nb / 2);
339         if (nb & 1)
340                 if_cs_write8(card, IF_CS_H_WRITE, buf[nb-1]);
341
342         if_cs_write16(card, IF_CS_H_STATUS, IF_CS_H_STATUS_TX_OVER);
343         if_cs_write16(card, IF_CS_H_INT_CAUSE, IF_CS_H_STATUS_TX_OVER);
344
345         lbs_deb_leave(LBS_DEB_CS);
346 }
347
348
349 /*
350  * Get the command result out of the card.
351  */
352 static int if_cs_receive_cmdres(struct lbs_private *priv, u8 *data, u32 *len)
353 {
354         int ret = -1;
355         u16 val;
356
357         lbs_deb_enter(LBS_DEB_CS);
358
359         /* is hardware ready? */
360         val = if_cs_read16(priv->card, IF_CS_C_STATUS);
361         if ((val & IF_CS_C_S_CMD_UPLD_RDY) == 0) {
362                 lbs_pr_err("card not ready for CMD\n");
363                 goto out;
364         }
365
366         *len = if_cs_read16(priv->card, IF_CS_C_CMD_LEN);
367         if ((*len == 0) || (*len > LBS_CMD_BUFFER_SIZE)) {
368                 lbs_pr_err("card cmd buffer has invalid # of bytes (%d)\n", *len);
369                 goto out;
370         }
371
372         /* read even number of bytes, then odd byte if necessary */
373         if_cs_read16_rep(priv->card, IF_CS_C_CMD, data, *len/sizeof(u16));
374         if (*len & 1)
375                 data[*len-1] = if_cs_read8(priv->card, IF_CS_C_CMD);
376
377         /* This is a workaround for a firmware that reports too much
378          * bytes */
379         *len -= 8;
380         ret = 0;
381 out:
382         lbs_deb_leave_args(LBS_DEB_CS, "ret %d, len %d", ret, *len);
383         return ret;
384 }
385
386
387 static struct sk_buff *if_cs_receive_data(struct lbs_private *priv)
388 {
389         struct sk_buff *skb = NULL;
390         u16 len;
391         u8 *data;
392
393         lbs_deb_enter(LBS_DEB_CS);
394
395         len = if_cs_read16(priv->card, IF_CS_C_READ_LEN);
396         if (len == 0 || len > MRVDRV_ETH_RX_PACKET_BUFFER_SIZE) {
397                 lbs_pr_err("card data buffer has invalid # of bytes (%d)\n", len);
398                 priv->stats.rx_dropped++;
399                 printk(KERN_INFO "##HS %s:%d TODO\n", __FUNCTION__, __LINE__);
400                 goto dat_err;
401         }
402
403         //TODO: skb = dev_alloc_skb(len+ETH_FRAME_LEN+MRVDRV_SNAP_HEADER_LEN+EXTRA_LEN);
404         skb = dev_alloc_skb(MRVDRV_ETH_RX_PACKET_BUFFER_SIZE + 2);
405         if (!skb)
406                 goto out;
407         skb_put(skb, len);
408         skb_reserve(skb, 2);/* 16 byte align */
409         data = skb->data;
410
411         /* read even number of bytes, then odd byte if necessary */
412         if_cs_read16_rep(priv->card, IF_CS_H_READ, data, len/sizeof(u16));
413         if (len & 1)
414                 data[len-1] = if_cs_read8(priv->card, IF_CS_H_READ);
415
416 dat_err:
417         if_cs_write16(priv->card, IF_CS_H_STATUS, IF_CS_H_STATUS_RX_OVER);
418         if_cs_write16(priv->card, IF_CS_H_INT_CAUSE, IF_CS_H_IC_RX_OVER);
419
420 out:
421         lbs_deb_leave_args(LBS_DEB_CS, "ret %p", skb);
422         return skb;
423 }
424
425
426
427 /********************************************************************/
428 /* Firmware                                                         */
429 /********************************************************************/
430
431 /*
432  * Tries to program the helper firmware.
433  *
434  * Return 0 on success
435  */
436 static int if_cs_prog_helper(struct if_cs_card *card)
437 {
438         int ret = 0;
439         int sent = 0;
440         u8  scratch;
441         const struct firmware *fw;
442
443         lbs_deb_enter(LBS_DEB_CS);
444
445         scratch = if_cs_read8(card, IF_CS_SCRATCH);
446
447         /* "If the value is 0x5a, the firmware is already
448          * downloaded successfully"
449          */
450         if (scratch == 0x5a)
451                 goto done;
452
453         /* "If the value is != 00, it is invalid value of register */
454         if (scratch != 0x00) {
455                 ret = -ENODEV;
456                 goto done;
457         }
458
459         /* TODO: make firmware file configurable */
460         ret = request_firmware(&fw, "libertas_cs_helper.fw",
461                 &handle_to_dev(card->p_dev));
462         if (ret) {
463                 lbs_pr_err("can't load helper firmware\n");
464                 ret = -ENODEV;
465                 goto done;
466         }
467         lbs_deb_cs("helper size %td\n", fw->size);
468
469         /* "Set the 5 bytes of the helper image to 0" */
470         /* Not needed, this contains an ARM branch instruction */
471
472         for (;;) {
473                 /* "the number of bytes to send is 256" */
474                 int count = 256;
475                 int remain = fw->size - sent;
476
477                 if (remain < count)
478                         count = remain;
479                 /* printk(KERN_INFO "//HS %d loading %d of %d bytes\n",
480                         __LINE__, sent, fw->size); */
481
482                 /* "write the number of bytes to be sent to the I/O Command
483                  * write length register" */
484                 if_cs_write16(card, IF_CS_H_CMD_LEN, count);
485
486                 /* "write this to I/O Command port register as 16 bit writes */
487                 if (count)
488                         if_cs_write16_rep(card, IF_CS_H_CMD,
489                                 &fw->data[sent],
490                                 count >> 1);
491
492                 /* "Assert the download over interrupt command in the Host
493                  * status register" */
494                 if_cs_write8(card, IF_CS_H_STATUS, IF_CS_H_STATUS_DNLD_OVER);
495
496                 /* "Assert the download over interrupt command in the Card
497                  * interrupt case register" */
498                 if_cs_write16(card, IF_CS_H_INT_CAUSE, IF_CS_H_IC_DNLD_OVER);
499
500                 /* "The host polls the Card Status register ... for 50 ms before
501                    declaring a failure */
502                 ret = if_cs_poll_while_fw_download(card, IF_CS_C_STATUS,
503                         IF_CS_C_S_CMD_DNLD_RDY);
504                 if (ret < 0) {
505                         lbs_pr_err("can't download helper at 0x%x, ret %d\n",
506                                 sent, ret);
507                         goto done;
508                 }
509
510                 if (count == 0)
511                         break;
512
513                 sent += count;
514         }
515
516         release_firmware(fw);
517         ret = 0;
518
519 done:
520         lbs_deb_leave_args(LBS_DEB_CS, "ret %d", ret);
521         return ret;
522 }
523
524
525 static int if_cs_prog_real(struct if_cs_card *card)
526 {
527         const struct firmware *fw;
528         int ret = 0;
529         int retry = 0;
530         int len = 0;
531         int sent;
532
533         lbs_deb_enter(LBS_DEB_CS);
534
535         /* TODO: make firmware file configurable */
536         ret = request_firmware(&fw, "libertas_cs.fw",
537                 &handle_to_dev(card->p_dev));
538         if (ret) {
539                 lbs_pr_err("can't load firmware\n");
540                 ret = -ENODEV;
541                 goto done;
542         }
543         lbs_deb_cs("fw size %td\n", fw->size);
544
545         ret = if_cs_poll_while_fw_download(card, IF_CS_C_SQ_READ_LOW, IF_CS_C_SQ_HELPER_OK);
546         if (ret < 0) {
547                 int i;
548                 lbs_pr_err("helper firmware doesn't answer\n");
549                 for (i = 0; i < 0x50; i += 2)
550                         printk(KERN_INFO "## HS %02x: %04x\n",
551                                 i, if_cs_read16(card, i));
552                 goto err_release;
553         }
554
555         for (sent = 0; sent < fw->size; sent += len) {
556                 len = if_cs_read16(card, IF_CS_C_SQ_READ_LOW);
557                 /* printk(KERN_INFO "//HS %d loading %d of %d bytes\n",
558                         __LINE__, sent, fw->size); */
559                 if (len & 1) {
560                         retry++;
561                         lbs_pr_info("odd, need to retry this firmware block\n");
562                 } else {
563                         retry = 0;
564                 }
565
566                 if (retry > 20) {
567                         lbs_pr_err("could not download firmware\n");
568                         ret = -ENODEV;
569                         goto err_release;
570                 }
571                 if (retry) {
572                         sent -= len;
573                 }
574
575
576                 if_cs_write16(card, IF_CS_H_CMD_LEN, len);
577
578                 if_cs_write16_rep(card, IF_CS_H_CMD,
579                         &fw->data[sent],
580                         (len+1) >> 1);
581                 if_cs_write8(card, IF_CS_H_STATUS, IF_CS_H_STATUS_DNLD_OVER);
582                 if_cs_write16(card, IF_CS_H_INT_CAUSE, IF_CS_H_IC_DNLD_OVER);
583
584                 ret = if_cs_poll_while_fw_download(card, IF_CS_C_STATUS,
585                         IF_CS_C_S_CMD_DNLD_RDY);
586                 if (ret < 0) {
587                         lbs_pr_err("can't download firmware at 0x%x\n", sent);
588                         goto err_release;
589                 }
590         }
591
592         ret = if_cs_poll_while_fw_download(card, IF_CS_SCRATCH, 0x5a);
593         if (ret < 0) {
594                 lbs_pr_err("firmware download failed\n");
595                 goto err_release;
596         }
597
598         ret = 0;
599         goto done;
600
601
602 err_release:
603         release_firmware(fw);
604
605 done:
606         lbs_deb_leave_args(LBS_DEB_CS, "ret %d", ret);
607         return ret;
608 }
609
610
611
612 /********************************************************************/
613 /* Callback functions for libertas.ko                               */
614 /********************************************************************/
615
616 /* Send commands or data packets to the card */
617 static int if_cs_host_to_card(struct lbs_private *priv,
618         u8 type,
619         u8 *buf,
620         u16 nb)
621 {
622         int ret = -1;
623
624         lbs_deb_enter_args(LBS_DEB_CS, "type %d, bytes %d", type, nb);
625
626         switch (type) {
627         case MVMS_DAT:
628                 priv->dnld_sent = DNLD_DATA_SENT;
629                 if_cs_send_data(priv, buf, nb);
630                 ret = 0;
631                 break;
632         case MVMS_CMD:
633                 priv->dnld_sent = DNLD_CMD_SENT;
634                 ret = if_cs_send_cmd(priv, buf, nb);
635                 break;
636         default:
637                 lbs_pr_err("%s: unsupported type %d\n", __FUNCTION__, type);
638         }
639
640         lbs_deb_leave_args(LBS_DEB_CS, "ret %d", ret);
641         return ret;
642 }
643
644
645 static int if_cs_get_int_status(struct lbs_private *priv, u8 *ireg)
646 {
647         struct if_cs_card *card = (struct if_cs_card *)priv->card;
648         int ret = 0;
649         u16 int_cause;
650         u8 *cmdbuf;
651         *ireg = 0;
652
653         lbs_deb_enter(LBS_DEB_CS);
654
655         if (priv->surpriseremoved)
656                 goto out;
657
658         int_cause = if_cs_read16(card, IF_CS_C_INT_CAUSE) & IF_CS_C_IC_MASK;
659         if_cs_write16(card, IF_CS_C_INT_CAUSE, int_cause);
660
661         *ireg = if_cs_read16(card, IF_CS_C_STATUS) & IF_CS_C_S_MASK;
662
663         if (!*ireg)
664                 goto sbi_get_int_status_exit;
665
666 sbi_get_int_status_exit:
667
668         /* is there a data packet for us? */
669         if (*ireg & IF_CS_C_S_RX_UPLD_RDY) {
670                 struct sk_buff *skb = if_cs_receive_data(priv);
671                 lbs_process_rxed_packet(priv, skb);
672                 *ireg &= ~IF_CS_C_S_RX_UPLD_RDY;
673         }
674
675         if (*ireg & IF_CS_C_S_TX_DNLD_RDY) {
676                 priv->dnld_sent = DNLD_RES_RECEIVED;
677         }
678
679         /* Card has a command result for us */
680         if (*ireg & IF_CS_C_S_CMD_UPLD_RDY) {
681                 spin_lock(&priv->driver_lock);
682                 if (!priv->cur_cmd) {
683                         cmdbuf = priv->upld_buf;
684                         priv->hisregcpy &= ~IF_CS_C_S_RX_UPLD_RDY;
685                 } else {
686                         cmdbuf = (u8 *) priv->cur_cmd->cmdbuf;
687                 }
688
689                 ret = if_cs_receive_cmdres(priv, cmdbuf, &priv->upld_len);
690                 spin_unlock(&priv->driver_lock);
691                 if (ret < 0)
692                         lbs_pr_err("could not receive cmd from card\n");
693         }
694
695 out:
696         lbs_deb_leave_args(LBS_DEB_CS, "ret %d, ireg 0x%x, hisregcpy 0x%x", ret, *ireg, priv->hisregcpy);
697         return ret;
698 }
699
700
701 static int if_cs_read_event_cause(struct lbs_private *priv)
702 {
703         lbs_deb_enter(LBS_DEB_CS);
704
705         priv->eventcause = (if_cs_read16(priv->card, IF_CS_C_STATUS) & IF_CS_C_S_STATUS_MASK) >> 5;
706         if_cs_write16(priv->card, IF_CS_H_INT_CAUSE, IF_CS_H_IC_HOST_EVENT);
707
708         return 0;
709 }
710
711
712
713 /********************************************************************/
714 /* Card Services                                                    */
715 /********************************************************************/
716
717 /*
718  * After a card is removed, if_cs_release() will unregister the
719  * device, and release the PCMCIA configuration.  If the device is
720  * still open, this will be postponed until it is closed.
721  */
722 static void if_cs_release(struct pcmcia_device *p_dev)
723 {
724         struct if_cs_card *card = p_dev->priv;
725
726         lbs_deb_enter(LBS_DEB_CS);
727
728         pcmcia_disable_device(p_dev);
729         free_irq(p_dev->irq.AssignedIRQ, card);
730         if (card->iobase)
731                 ioport_unmap(card->iobase);
732
733         lbs_deb_leave(LBS_DEB_CS);
734 }
735
736
737 /*
738  * This creates an "instance" of the driver, allocating local data
739  * structures for one device.  The device is registered with Card
740  * Services.
741  *
742  * The dev_link structure is initialized, but we don't actually
743  * configure the card at this point -- we wait until we receive a card
744  * insertion event.
745  */
746 static int if_cs_probe(struct pcmcia_device *p_dev)
747 {
748         int ret = -ENOMEM;
749         struct lbs_private *priv;
750         struct if_cs_card *card;
751         /* CIS parsing */
752         tuple_t tuple;
753         cisparse_t parse;
754         cistpl_cftable_entry_t *cfg = &parse.cftable_entry;
755         cistpl_io_t *io = &cfg->io;
756         u_char buf[64];
757
758         lbs_deb_enter(LBS_DEB_CS);
759
760         card = kzalloc(sizeof(struct if_cs_card), GFP_KERNEL);
761         if (!card) {
762                 lbs_pr_err("error in kzalloc\n");
763                 goto out;
764         }
765         card->p_dev = p_dev;
766         p_dev->priv = card;
767
768         p_dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
769         p_dev->irq.Handler = NULL;
770         p_dev->irq.IRQInfo1 = IRQ_INFO2_VALID | IRQ_LEVEL_ID;
771
772         p_dev->conf.Attributes = 0;
773         p_dev->conf.IntType = INT_MEMORY_AND_IO;
774
775         tuple.Attributes = 0;
776         tuple.TupleData = buf;
777         tuple.TupleDataMax = sizeof(buf);
778         tuple.TupleOffset = 0;
779
780         tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
781         if ((ret = pcmcia_get_first_tuple(p_dev, &tuple)) != 0 ||
782             (ret = pcmcia_get_tuple_data(p_dev, &tuple)) != 0 ||
783             (ret = pcmcia_parse_tuple(p_dev, &tuple, &parse)) != 0)
784         {
785                 lbs_pr_err("error in pcmcia_get_first_tuple etc\n");
786                 goto out1;
787         }
788
789         p_dev->conf.ConfigIndex = cfg->index;
790
791         /* Do we need to allocate an interrupt? */
792         if (cfg->irq.IRQInfo1) {
793                 p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
794         }
795
796         /* IO window settings */
797         if (cfg->io.nwin != 1) {
798                 lbs_pr_err("wrong CIS (check number of IO windows)\n");
799                 ret = -ENODEV;
800                 goto out1;
801         }
802         p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
803         p_dev->io.BasePort1 = io->win[0].base;
804         p_dev->io.NumPorts1 = io->win[0].len;
805
806         /* This reserves IO space but doesn't actually enable it */
807         ret = pcmcia_request_io(p_dev, &p_dev->io);
808         if (ret) {
809                 lbs_pr_err("error in pcmcia_request_io\n");
810                 goto out1;
811         }
812
813         /*
814          * Allocate an interrupt line.  Note that this does not assign
815          * a handler to the interrupt, unless the 'Handler' member of
816          * the irq structure is initialized.
817          */
818         if (p_dev->conf.Attributes & CONF_ENABLE_IRQ) {
819                 ret = pcmcia_request_irq(p_dev, &p_dev->irq);
820                 if (ret) {
821                         lbs_pr_err("error in pcmcia_request_irq\n");
822                         goto out1;
823                 }
824         }
825
826         /* Initialize io access */
827         card->iobase = ioport_map(p_dev->io.BasePort1, p_dev->io.NumPorts1);
828         if (!card->iobase) {
829                 lbs_pr_err("error in ioport_map\n");
830                 ret = -EIO;
831                 goto out1;
832         }
833
834         /*
835          * This actually configures the PCMCIA socket -- setting up
836          * the I/O windows and the interrupt mapping, and putting the
837          * card and host interface into "Memory and IO" mode.
838          */
839         ret = pcmcia_request_configuration(p_dev, &p_dev->conf);
840         if (ret) {
841                 lbs_pr_err("error in pcmcia_request_configuration\n");
842                 goto out2;
843         }
844
845         /* Finally, report what we've done */
846         lbs_deb_cs("irq %d, io 0x%04x-0x%04x\n",
847                p_dev->irq.AssignedIRQ, p_dev->io.BasePort1,
848                p_dev->io.BasePort1 + p_dev->io.NumPorts1 - 1);
849
850
851         /* Load the firmware early, before calling into libertas.ko */
852         ret = if_cs_prog_helper(card);
853         if (ret == 0)
854                 ret = if_cs_prog_real(card);
855         if (ret)
856                 goto out2;
857
858         /* Make this card known to the libertas driver */
859         priv = lbs_add_card(card, &p_dev->dev);
860         if (!priv) {
861                 ret = -ENOMEM;
862                 goto out2;
863         }
864
865         /* Store pointers to our call-back functions */
866         card->priv = priv;
867         priv->card = card;
868         priv->hw_host_to_card     = if_cs_host_to_card;
869         priv->hw_get_int_status   = if_cs_get_int_status;
870         priv->hw_read_event_cause = if_cs_read_event_cause;
871
872         priv->fw_ready = 1;
873
874         /* Now actually get the IRQ */
875         ret = request_irq(p_dev->irq.AssignedIRQ, if_cs_interrupt,
876                 IRQF_SHARED, DRV_NAME, card);
877         if (ret) {
878                 lbs_pr_err("error in request_irq\n");
879                 goto out3;
880         }
881
882         /* Clear any interrupt cause that happend while sending
883          * firmware/initializing card */
884         if_cs_write16(card, IF_CS_C_INT_CAUSE, IF_CS_C_IC_MASK);
885         if_cs_enable_ints(card);
886
887         /* And finally bring the card up */
888         if (lbs_start_card(priv) != 0) {
889                 lbs_pr_err("could not activate card\n");
890                 goto out3;
891         }
892
893         ret = 0;
894         goto out;
895
896 out3:
897         lbs_remove_card(priv);
898 out2:
899         ioport_unmap(card->iobase);
900 out1:
901         pcmcia_disable_device(p_dev);
902 out:
903         lbs_deb_leave_args(LBS_DEB_CS, "ret %d", ret);
904         return ret;
905 }
906
907
908 /*
909  * This deletes a driver "instance".  The device is de-registered with
910  * Card Services.  If it has been released, all local data structures
911  * are freed.  Otherwise, the structures will be freed when the device
912  * is released.
913  */
914 static void if_cs_detach(struct pcmcia_device *p_dev)
915 {
916         struct if_cs_card *card = p_dev->priv;
917
918         lbs_deb_enter(LBS_DEB_CS);
919
920         lbs_stop_card(card->priv);
921         lbs_remove_card(card->priv);
922         if_cs_disable_ints(card);
923         if_cs_release(p_dev);
924         kfree(card);
925
926         lbs_deb_leave(LBS_DEB_CS);
927 }
928
929
930
931 /********************************************************************/
932 /* Module initialization                                            */
933 /********************************************************************/
934
935 static struct pcmcia_device_id if_cs_ids[] = {
936         PCMCIA_DEVICE_MANF_CARD(0x02df, 0x8103),
937         PCMCIA_DEVICE_NULL,
938 };
939 MODULE_DEVICE_TABLE(pcmcia, if_cs_ids);
940
941
942 static struct pcmcia_driver lbs_driver = {
943         .owner          = THIS_MODULE,
944         .drv            = {
945                 .name   = DRV_NAME,
946         },
947         .probe          = if_cs_probe,
948         .remove         = if_cs_detach,
949         .id_table       = if_cs_ids,
950 };
951
952
953 static int __init if_cs_init(void)
954 {
955         int ret;
956
957         lbs_deb_enter(LBS_DEB_CS);
958         ret = pcmcia_register_driver(&lbs_driver);
959         lbs_deb_leave(LBS_DEB_CS);
960         return ret;
961 }
962
963
964 static void __exit if_cs_exit(void)
965 {
966         lbs_deb_enter(LBS_DEB_CS);
967         pcmcia_unregister_driver(&lbs_driver);
968         lbs_deb_leave(LBS_DEB_CS);
969 }
970
971
972 module_init(if_cs_init);
973 module_exit(if_cs_exit);