]> www.pilppa.org Git - linux-2.6-omap-h63xx.git/blob - drivers/net/wireless/iwlwifi/iwl-channel.h
[IWLWIFI]: add iwlwifi wireless drivers
[linux-2.6-omap-h63xx.git] / drivers / net / wireless / iwlwifi / iwl-channel.h
1 /******************************************************************************
2  *
3  * Copyright(c) 2005 - 2007 Intel Corporation. All rights reserved.
4  *
5  * This program is free software; you can redistribute it and/or modify it
6  * under the terms of version 2 of the GNU General Public License as
7  * published by the Free Software Foundation.
8  *
9  * This program is distributed in the hope that it will be useful, but WITHOUT
10  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
12  * more details.
13  *
14  * You should have received a copy of the GNU General Public License along with
15  * this program; if not, write to the Free Software Foundation, Inc.,
16  * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
17  *
18  * The full GNU General Public License is included in this distribution in the
19  * file called LICENSE.
20  *
21  * Contact Information:
22  * James P. Ketrenos <ipw2100-admin@linux.intel.com>
23  * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
24  *
25  *****************************************************************************/
26 #ifndef __iwl_channel_h__
27 #define __iwl_channel_h__
28
29 #define IWL_NUM_SCAN_RATES         (2)
30
31 struct iwl_channel_tgd_info {
32         u8 type;
33         s8 max_power;
34 };
35
36 struct iwl_channel_tgh_info {
37         s64 last_radar_time;
38 };
39
40 /* current Tx power values to use, one for each rate for each channel.
41  * requested power is limited by:
42  * -- regulatory EEPROM limits for this channel
43  * -- hardware capabilities (clip-powers)
44  * -- spectrum management
45  * -- user preference (e.g. iwconfig)
46  * when requested power is set, base power index must also be set. */
47 struct iwl_channel_power_info {
48         struct iwl_tx_power tpc;        /* actual radio and DSP gain settings */
49         s8 power_table_index;   /* actual (compenst'd) index into gain table */
50         s8 base_power_index;    /* gain index for power at factory temp. */
51         s8 requested_power;     /* power (dBm) requested for this chnl/rate */
52 };
53
54 /* current scan Tx power values to use, one for each scan rate for each
55  * channel. */
56 struct iwl_scan_power_info {
57         struct iwl_tx_power tpc;        /* actual radio and DSP gain settings */
58         s8 power_table_index;   /* actual (compenst'd) index into gain table */
59         s8 requested_power;     /* scan pwr (dBm) requested for chnl/rate */
60 };
61
62 /* Channel unlock period is 15 seconds. If no beacon or probe response
63  * has been received within 15 seconds on a locked channel then the channel
64  * remains locked. */
65 #define TX_UNLOCK_PERIOD 15
66
67 /* CSA lock period is 15 seconds.  If a CSA has been received on a channel in
68  * the last 15 seconds, the channel is locked */
69 #define CSA_LOCK_PERIOD 15
70 /*
71  * One for each channel, holds all channel setup data
72  * Some of the fields (e.g. eeprom and flags/max_power_avg) are redundant
73  *     with one another!
74  */
75 #define IWL4965_MAX_RATE (33)
76
77 struct iwl_channel_info {
78         struct iwl_channel_tgd_info tgd;
79         struct iwl_channel_tgh_info tgh;
80         struct iwl_eeprom_channel eeprom;       /* EEPROM regulatory limit */
81         struct iwl_eeprom_channel fat_eeprom;   /* EEPROM regulatory limit for
82                                                  * FAT channel */
83
84         u8 channel;       /* channel number */
85         u8 flags;         /* flags copied from EEPROM */
86         s8 max_power_avg; /* (dBm) regul. eeprom, normal Tx, any rate */
87         s8 curr_txpow;    /* (dBm) regulatory/spectrum/user (not h/w) */
88         s8 min_power;     /* always 0 */
89         s8 scan_power;    /* (dBm) regul. eeprom, direct scans, any rate */
90
91         u8 group_index;   /* 0-4, maps channel to group1/2/3/4/5 */
92         u8 band_index;    /* 0-4, maps channel to band1/2/3/4/5 */
93         u8 phymode;       /* MODE_IEEE80211{A,B,G} */
94
95         /* Radio/DSP gain settings for each "normal" data Tx rate.
96          * These include, in addition to RF and DSP gain, a few fields for
97          *   remembering/modifying gain settings (indexes). */
98         struct iwl_channel_power_info power_info[IWL4965_MAX_RATE];
99
100 #if IWL == 4965
101         /* FAT channel info */
102         s8 fat_max_power_avg;   /* (dBm) regul. eeprom, normal Tx, any rate */
103         s8 fat_curr_txpow;      /* (dBm) regulatory/spectrum/user (not h/w) */
104         s8 fat_min_power;       /* always 0 */
105         s8 fat_scan_power;      /* (dBm) eeprom, direct scans, any rate */
106         u8 fat_flags;           /* flags copied from EEPROM */
107         u8 fat_extension_channel;
108 #endif
109
110         /* Radio/DSP gain settings for each scan rate, for directed scans. */
111         struct iwl_scan_power_info scan_pwr_info[IWL_NUM_SCAN_RATES];
112 };
113
114 struct iwl_clip_group {
115         /* maximum power level to prevent clipping for each rate, derived by
116          *   us from this band's saturation power in EEPROM */
117         const s8 clip_powers[IWL_MAX_RATES];
118 };
119
120 static inline int is_channel_valid(const struct iwl_channel_info *ch_info)
121 {
122         if (ch_info == NULL)
123                 return 0;
124         return (ch_info->flags & EEPROM_CHANNEL_VALID) ? 1 : 0;
125 }
126
127 static inline int is_channel_narrow(const struct iwl_channel_info *ch_info)
128 {
129         return (ch_info->flags & EEPROM_CHANNEL_NARROW) ? 1 : 0;
130 }
131
132 static inline int is_channel_radar(const struct iwl_channel_info *ch_info)
133 {
134         return (ch_info->flags & EEPROM_CHANNEL_RADAR) ? 1 : 0;
135 }
136
137 static inline u8 is_channel_a_band(const struct iwl_channel_info *ch_info)
138 {
139         return ch_info->phymode == MODE_IEEE80211A;
140 }
141
142 static inline u8 is_channel_bg_band(const struct iwl_channel_info *ch_info)
143 {
144         return ((ch_info->phymode == MODE_IEEE80211B) ||
145                 (ch_info->phymode == MODE_IEEE80211G));
146 }
147
148 static inline int is_channel_passive(const struct iwl_channel_info *ch)
149 {
150         return (!(ch->flags & EEPROM_CHANNEL_ACTIVE)) ? 1 : 0;
151 }
152
153 static inline int is_channel_ibss(const struct iwl_channel_info *ch)
154 {
155         return ((ch->flags & EEPROM_CHANNEL_IBSS)) ? 1 : 0;
156 }
157
158 extern const struct iwl_channel_info *iwl_get_channel_info(
159         const struct iwl_priv *priv, int phymode, u16 channel);
160
161 #endif