drivers/net/wireless/iwlwifi/iwl-3945.c

   1 /******************************************************************************
   2  *
   3  * Copyright(c) 2003 - 2008 Intel Corporation. All rights reserved.
   4  *
   5  * This program is free software; you can redistribute it and/or modify it
   6  * under the terms of version 2 of the GNU General Public License as
   7  * published by the Free Software Foundation.
   8  *
   9  * This program is distributed in the hope that it will be useful, but WITHOUT
  10  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  11  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  12  * more details.
  13  *
  14  * You should have received a copy of the GNU General Public License along with
  15  * this program; if not, write to the Free Software Foundation, Inc.,
  16  * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
  17  *
  18  * The full GNU General Public License is included in this distribution in the
  19  * file called LICENSE.
  20  *
  21  * Contact Information:
  22  * James P. Ketrenos <ipw2100-admin@linux.intel.com>
  23  * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
  24  *
  25  *****************************************************************************/
  26
  27 #include <linux/kernel.h>
  28 #include <linux/module.h>
  29 #include <linux/init.h>
  30 #include <linux/pci.h>
  31 #include <linux/dma-mapping.h>
  32 #include <linux/delay.h>
  33 #include <linux/skbuff.h>
  34 #include <linux/netdevice.h>
  35 #include <linux/wireless.h>
  36 #include <linux/firmware.h>
  37 #include <linux/etherdevice.h>
  38 #include <asm/unaligned.h>
  39 #include <net/mac80211.h>
  40
  41 #include "iwl-3945-core.h"
  42 #include "iwl-3945.h"
  43 #include "iwl-helpers.h"
  44 #include "iwl-3945-rs.h"
  45
  46 #define IWL_DECLARE_RATE_INFO(r, ip, in, rp, rn, pp, np)    \
  47         [IWL_RATE_##r##M_INDEX] = { IWL_RATE_##r##M_PLCP,   \
  48                                     IWL_RATE_##r##M_IEEE,   \
  49                                     IWL_RATE_##ip##M_INDEX, \
  50                                     IWL_RATE_##in##M_INDEX, \
  51                                     IWL_RATE_##rp##M_INDEX, \
  52                                     IWL_RATE_##rn##M_INDEX, \
  53                                     IWL_RATE_##pp##M_INDEX, \
  54                                     IWL_RATE_##np##M_INDEX, \
  55                                     IWL_RATE_##r##M_INDEX_TABLE, \
  56                                     IWL_RATE_##ip##M_INDEX_TABLE }
  57
  58 /*
  59  * Parameter order:
  60  *   rate, prev rate, next rate, prev tgg rate, next tgg rate
  61  *
  62  * If there isn't a valid next or previous rate then INV is used which
  63  * maps to IWL_RATE_INVALID
  64  *
  65  */
  66 const struct iwl3945_rate_info iwl3945_rates[IWL_RATE_COUNT] = {
  67         IWL_DECLARE_RATE_INFO(1, INV, 2, INV, 2, INV, 2),    /*  1mbps */
  68         IWL_DECLARE_RATE_INFO(2, 1, 5, 1, 5, 1, 5),          /*  2mbps */
  69         IWL_DECLARE_RATE_INFO(5, 2, 6, 2, 11, 2, 11),        /*5.5mbps */
  70         IWL_DECLARE_RATE_INFO(11, 9, 12, 5, 12, 5, 18),      /* 11mbps */
  71         IWL_DECLARE_RATE_INFO(6, 5, 9, 5, 11, 5, 11),        /*  6mbps */
  72         IWL_DECLARE_RATE_INFO(9, 6, 11, 5, 11, 5, 11),       /*  9mbps */
  73         IWL_DECLARE_RATE_INFO(12, 11, 18, 11, 18, 11, 18),   /* 12mbps */
  74         IWL_DECLARE_RATE_INFO(18, 12, 24, 12, 24, 11, 24),   /* 18mbps */
  75         IWL_DECLARE_RATE_INFO(24, 18, 36, 18, 36, 18, 36),   /* 24mbps */
  76         IWL_DECLARE_RATE_INFO(36, 24, 48, 24, 48, 24, 48),   /* 36mbps */
  77         IWL_DECLARE_RATE_INFO(48, 36, 54, 36, 54, 36, 54),   /* 48mbps */
  78         IWL_DECLARE_RATE_INFO(54, 48, INV, 48, INV, 48, INV),/* 54mbps */
  79 };
  80
  81 /* 1 = enable the iwl3945_disable_events() function */
  82 #define IWL_EVT_DISABLE (0)
  83 #define IWL_EVT_DISABLE_SIZE (1532/32)
  84
  85 /**
  86  * iwl3945_disable_events - Disable selected events in uCode event log
  87  *
  88  * Disable an event by writing "1"s into "disable"
  89  *   bitmap in SRAM.  Bit position corresponds to Event # (id/type).
  90  *   Default values of 0 enable uCode events to be logged.
  91  * Use for only special debugging.  This function is just a placeholder as-is,
  92  *   you'll need to provide the special bits! ...
  93  *   ... and set IWL_EVT_DISABLE to 1. */
  94 void iwl3945_disable_events(struct iwl3945_priv *priv)
  95 {
  96         int ret;
  97         int i;
  98         u32 base;               /* SRAM address of event log header */
  99         u32 disable_ptr;        /* SRAM address of event-disable bitmap array */
 100         u32 array_size;         /* # of u32 entries in array */
 101         u32 evt_disable[IWL_EVT_DISABLE_SIZE] = {
 102                 0x00000000,     /*   31 -    0  Event id numbers */
 103                 0x00000000,     /*   63 -   32 */
 104                 0x00000000,     /*   95 -   64 */
 105                 0x00000000,     /*  127 -   96 */
 106                 0x00000000,     /*  159 -  128 */
 107                 0x00000000,     /*  191 -  160 */
 108                 0x00000000,     /*  223 -  192 */
 109                 0x00000000,     /*  255 -  224 */
 110                 0x00000000,     /*  287 -  256 */
 111                 0x00000000,     /*  319 -  288 */
 112                 0x00000000,     /*  351 -  320 */
 113                 0x00000000,     /*  383 -  352 */
 114                 0x00000000,     /*  415 -  384 */
 115                 0x00000000,     /*  447 -  416 */
 116                 0x00000000,     /*  479 -  448 */
 117                 0x00000000,     /*  511 -  480 */
 118                 0x00000000,     /*  543 -  512 */
 119                 0x00000000,     /*  575 -  544 */
 120                 0x00000000,     /*  607 -  576 */
 121                 0x00000000,     /*  639 -  608 */
 122                 0x00000000,     /*  671 -  640 */
 123                 0x00000000,     /*  703 -  672 */
 124                 0x00000000,     /*  735 -  704 */
 125                 0x00000000,     /*  767 -  736 */
 126                 0x00000000,     /*  799 -  768 */
 127                 0x00000000,     /*  831 -  800 */
 128                 0x00000000,     /*  863 -  832 */
 129                 0x00000000,     /*  895 -  864 */
 130                 0x00000000,     /*  927 -  896 */
 131                 0x00000000,     /*  959 -  928 */
 132                 0x00000000,     /*  991 -  960 */
 133                 0x00000000,     /* 1023 -  992 */
 134                 0x00000000,     /* 1055 - 1024 */
 135                 0x00000000,     /* 1087 - 1056 */
 136                 0x00000000,     /* 1119 - 1088 */
 137                 0x00000000,     /* 1151 - 1120 */
 138                 0x00000000,     /* 1183 - 1152 */
 139                 0x00000000,     /* 1215 - 1184 */
 140                 0x00000000,     /* 1247 - 1216 */
 141                 0x00000000,     /* 1279 - 1248 */
 142                 0x00000000,     /* 1311 - 1280 */
 143                 0x00000000,     /* 1343 - 1312 */
 144                 0x00000000,     /* 1375 - 1344 */
 145                 0x00000000,     /* 1407 - 1376 */
 146                 0x00000000,     /* 1439 - 1408 */
 147                 0x00000000,     /* 1471 - 1440 */
 148                 0x00000000,     /* 1503 - 1472 */
 149         };
 150
 151         base = le32_to_cpu(priv->card_alive.log_event_table_ptr);
 152         if (!iwl3945_hw_valid_rtc_data_addr(base)) {
 153                 IWL_ERROR("Invalid event log pointer 0x%08X\n", base);
 154                 return;
 155         }
 156
 157         ret = iwl3945_grab_nic_access(priv);
 158         if (ret) {
 159                 IWL_WARNING("Can not read from adapter at this time.\n");
 160                 return;
 161         }
 162
 163         disable_ptr = iwl3945_read_targ_mem(priv, base + (4 * sizeof(u32)));
 164         array_size = iwl3945_read_targ_mem(priv, base + (5 * sizeof(u32)));
 165         iwl3945_release_nic_access(priv);
 166
 167         if (IWL_EVT_DISABLE && (array_size == IWL_EVT_DISABLE_SIZE)) {
 168                 IWL_DEBUG_INFO("Disabling selected uCode log events at 0x%x\n",
 169                                disable_ptr);
 170                 ret = iwl3945_grab_nic_access(priv);
 171                 for (i = 0; i < IWL_EVT_DISABLE_SIZE; i++)
 172                         iwl3945_write_targ_mem(priv,
 173                                            disable_ptr + (i * sizeof(u32)),
 174                                            evt_disable[i]);
 175
 176                 iwl3945_release_nic_access(priv);
 177         } else {
 178                 IWL_DEBUG_INFO("Selected uCode log events may be disabled\n");
 179                 IWL_DEBUG_INFO("  by writing \"1\"s into disable bitmap\n");
 180                 IWL_DEBUG_INFO("  in SRAM at 0x%x, size %d u32s\n",
 181                                disable_ptr, array_size);
 182         }
 183
 184 }
 185
 186 static int iwl3945_hwrate_to_plcp_idx(u8 plcp)
 187 {
 188         int idx;
 189
 190         for (idx = 0; idx < IWL_RATE_COUNT; idx++)
 191                 if (iwl3945_rates[idx].plcp == plcp)
 192                         return idx;
 193         return -1;
 194 }
 195
 196 /**
 197  * iwl3945_get_antenna_flags - Get antenna flags for RXON command
 198  * @priv: eeprom and antenna fields are used to determine antenna flags
 199  *
 200  * priv->eeprom  is used to determine if antenna AUX/MAIN are reversed
 201  * priv->antenna specifies the antenna diversity mode:
 202  *
 203  * IWL_ANTENNA_DIVERISTY - NIC selects best antenna by itself
 204  * IWL_ANTENNA_MAIN      - Force MAIN antenna
 205  * IWL_ANTENNA_AUX       - Force AUX antenna
 206  */
 207 __le32 iwl3945_get_antenna_flags(const struct iwl3945_priv *priv)
 208 {
 209         switch (priv->antenna) {
 210         case IWL_ANTENNA_DIVERSITY:
 211                 return 0;
 212
 213         case IWL_ANTENNA_MAIN:
 214                 if (priv->eeprom.antenna_switch_type)
 215                         return RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_B_MSK;
 216                 return RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_A_MSK;
 217
 218         case IWL_ANTENNA_AUX:
 219                 if (priv->eeprom.antenna_switch_type)
 220                         return RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_A_MSK;
 221                 return RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_B_MSK;
 222         }
 223
 224         /* bad antenna selector value */
 225         IWL_ERROR("Bad antenna selector value (0x%x)\n", priv->antenna);
 226         return 0;               /* "diversity" is default if error */
 227 }
 228
 229 #ifdef CONFIG_IWL3945_DEBUG
 230 #define TX_STATUS_ENTRY(x) case TX_STATUS_FAIL_ ## x: return #x
 231
 232 static const char *iwl3945_get_tx_fail_reason(u32 status)
 233 {
 234         switch (status & TX_STATUS_MSK) {
 235         case TX_STATUS_SUCCESS:
 236                 return "SUCCESS";
 237                 TX_STATUS_ENTRY(SHORT_LIMIT);
 238                 TX_STATUS_ENTRY(LONG_LIMIT);
 239                 TX_STATUS_ENTRY(FIFO_UNDERRUN);
 240                 TX_STATUS_ENTRY(MGMNT_ABORT);
 241                 TX_STATUS_ENTRY(NEXT_FRAG);
 242                 TX_STATUS_ENTRY(LIFE_EXPIRE);
 243                 TX_STATUS_ENTRY(DEST_PS);
 244                 TX_STATUS_ENTRY(ABORTED);
 245                 TX_STATUS_ENTRY(BT_RETRY);
 246                 TX_STATUS_ENTRY(STA_INVALID);
 247                 TX_STATUS_ENTRY(FRAG_DROPPED);
 248                 TX_STATUS_ENTRY(TID_DISABLE);
 249                 TX_STATUS_ENTRY(FRAME_FLUSHED);
 250                 TX_STATUS_ENTRY(INSUFFICIENT_CF_POLL);
 251                 TX_STATUS_ENTRY(TX_LOCKED);
 252                 TX_STATUS_ENTRY(NO_BEACON_ON_RADAR);
 253         }
 254
 255         return "UNKNOWN";
 256 }
 257 #else
 258 static inline const char *iwl3945_get_tx_fail_reason(u32 status)
 259 {
 260         return "";
 261 }
 262 #endif
 263
 264
 265 /**
 266  * iwl3945_tx_queue_reclaim - Reclaim Tx queue entries already Tx'd
 267  *
 268  * When FW advances 'R' index, all entries between old and new 'R' index
 269  * need to be reclaimed. As result, some free space forms. If there is
 270  * enough free space (> low mark), wake the stack that feeds us.
 271  */
 272 static void iwl3945_tx_queue_reclaim(struct iwl3945_priv *priv,
 273                                      int txq_id, int index)
 274 {
 275         struct iwl3945_tx_queue *txq = &priv->txq[txq_id];
 276         struct iwl3945_queue *q = &txq->q;
 277         struct iwl3945_tx_info *tx_info;
 278
 279         BUG_ON(txq_id == IWL_CMD_QUEUE_NUM);
 280
 281         for (index = iwl_queue_inc_wrap(index, q->n_bd); q->read_ptr != index;
 282                 q->read_ptr = iwl_queue_inc_wrap(q->read_ptr, q->n_bd)) {
 283
 284                 tx_info = &txq->txb[txq->q.read_ptr];
 285                 ieee80211_tx_status_irqsafe(priv->hw, tx_info->skb[0]);
 286                 tx_info->skb[0] = NULL;
 287                 iwl3945_hw_txq_free_tfd(priv, txq);
 288         }
 289
 290         if (iwl3945_queue_space(q) > q->low_mark && (txq_id >= 0) &&
 291                         (txq_id != IWL_CMD_QUEUE_NUM) &&
 292                         priv->mac80211_registered)
 293                 ieee80211_wake_queue(priv->hw, txq_id);
 294 }
 295
 296 /**
 297  * iwl3945_rx_reply_tx - Handle Tx response
 298  */
 299 static void iwl3945_rx_reply_tx(struct iwl3945_priv *priv,
 300                             struct iwl3945_rx_mem_buffer *rxb)
 301 {
 302         struct iwl3945_rx_packet *pkt = (void *)rxb->skb->data;
 303         u16 sequence = le16_to_cpu(pkt->hdr.sequence);
 304         int txq_id = SEQ_TO_QUEUE(sequence);
 305         int index = SEQ_TO_INDEX(sequence);
 306         struct iwl3945_tx_queue *txq = &priv->txq[txq_id];
 307         struct ieee80211_tx_info *info;
 308         struct iwl3945_tx_resp *tx_resp = (void *)&pkt->u.raw[0];
 309         u32  status = le32_to_cpu(tx_resp->status);
 310         int rate_idx;
 311
 312         if ((index >= txq->q.n_bd) || (iwl3945_x2_queue_used(&txq->q, index) == 0)) {
 313                 IWL_ERROR("Read index for DMA queue txq_id (%d) index %d "
 314                           "is out of range [0-%d] %d %d\n", txq_id,
 315                           index, txq->q.n_bd, txq->q.write_ptr,
 316                           txq->q.read_ptr);
 317                 return;
 318         }
 319
 320         info = IEEE80211_SKB_CB(txq->txb[txq->q.read_ptr].skb[0]);
 321         memset(&info->status, 0, sizeof(info->status));
 322
 323         info->status.retry_count = tx_resp->failure_frame;
 324         /* tx_status->rts_retry_count = tx_resp->failure_rts; */
 325         info->flags |= ((status & TX_STATUS_MSK) == TX_STATUS_SUCCESS) ?
 326                                 IEEE80211_TX_STAT_ACK : 0;
 327
 328         IWL_DEBUG_TX("Tx queue %d Status %s (0x%08x) plcp rate %d retries %d\n",
 329                         txq_id, iwl3945_get_tx_fail_reason(status), status,
 330                         tx_resp->rate, tx_resp->failure_frame);
 331
 332         rate_idx = iwl3945_hwrate_to_plcp_idx(tx_resp->rate);
 333         if (info->band == IEEE80211_BAND_5GHZ)
 334                 rate_idx -= IWL_FIRST_OFDM_RATE;
 335         info->tx_rate_idx = rate_idx;
 336         IWL_DEBUG_TX_REPLY("Tx queue reclaim %d\n", index);
 337         iwl3945_tx_queue_reclaim(priv, txq_id, index);
 338
 339         if (iwl_check_bits(status, TX_ABORT_REQUIRED_MSK))
 340                 IWL_ERROR("TODO:  Implement Tx ABORT REQUIRED!!!\n");
 341 }
 342
 343
 344
 345 /*****************************************************************************
 346  *
 347  * Intel PRO/Wireless 3945ABG/BG Network Connection
 348  *
 349  *  RX handler implementations
 350  *
 351  *****************************************************************************/
 352
 353 void iwl3945_hw_rx_statistics(struct iwl3945_priv *priv, struct iwl3945_rx_mem_buffer *rxb)
 354 {
 355         struct iwl3945_rx_packet *pkt = (void *)rxb->skb->data;
 356         IWL_DEBUG_RX("Statistics notification received (%d vs %d).\n",
 357                      (int)sizeof(struct iwl3945_notif_statistics),
 358                      le32_to_cpu(pkt->len));
 359
 360         memcpy(&priv->statistics, pkt->u.raw, sizeof(priv->statistics));
 361
 362         iwl3945_led_background(priv);
 363
 364         priv->last_statistics_time = jiffies;
 365 }
 366
 367 /******************************************************************************
 368  *
 369  * Misc. internal state and helper functions
 370  *
 371  ******************************************************************************/
 372 #ifdef CONFIG_IWL3945_DEBUG
 373
 374 /**
 375  * iwl3945_report_frame - dump frame to syslog during debug sessions
 376  *
 377  * You may hack this function to show different aspects of received frames,
 378  * including selective frame dumps.
 379  * group100 parameter selects whether to show 1 out of 100 good frames.
 380  */
 381 static void iwl3945_dbg_report_frame(struct iwl3945_priv *priv,
 382                       struct iwl3945_rx_packet *pkt,
 383                       struct ieee80211_hdr *header, int group100)
 384 {
 385         u32 to_us;
 386         u32 print_summary = 0;
 387         u32 print_dump = 0;     /* set to 1 to dump all frames' contents */
 388         u32 hundred = 0;
 389         u32 dataframe = 0;
 390         __le16 fc;
 391         u16 seq_ctl;
 392         u16 channel;
 393         u16 phy_flags;
 394         u16 length;
 395         u16 status;
 396         u16 bcn_tmr;
 397         u32 tsf_low;
 398         u64 tsf;
 399         u8 rssi;
 400         u8 agc;
 401         u16 sig_avg;
 402         u16 noise_diff;
 403         struct iwl3945_rx_frame_stats *rx_stats = IWL_RX_STATS(pkt);
 404         struct iwl3945_rx_frame_hdr *rx_hdr = IWL_RX_HDR(pkt);
 405         struct iwl3945_rx_frame_end *rx_end = IWL_RX_END(pkt);
 406         u8 *data = IWL_RX_DATA(pkt);
 407
 408         /* MAC header */
 409         fc = header->frame_control;
 410         seq_ctl = le16_to_cpu(header->seq_ctrl);
 411
 412         /* metadata */
 413         channel = le16_to_cpu(rx_hdr->channel);
 414         phy_flags = le16_to_cpu(rx_hdr->phy_flags);
 415         length = le16_to_cpu(rx_hdr->len);
 416
 417         /* end-of-frame status and timestamp */
 418         status = le32_to_cpu(rx_end->status);
 419         bcn_tmr = le32_to_cpu(rx_end->beacon_timestamp);
 420         tsf_low = le64_to_cpu(rx_end->timestamp) & 0x0ffffffff;
 421         tsf = le64_to_cpu(rx_end->timestamp);
 422
 423         /* signal statistics */
 424         rssi = rx_stats->rssi;
 425         agc = rx_stats->agc;
 426         sig_avg = le16_to_cpu(rx_stats->sig_avg);
 427         noise_diff = le16_to_cpu(rx_stats->noise_diff);
 428
 429         to_us = !compare_ether_addr(header->addr1, priv->mac_addr);
 430
 431         /* if data frame is to us and all is good,
 432          *   (optionally) print summary for only 1 out of every 100 */
 433         if (to_us && (fc & ~cpu_to_le16(IEEE80211_FCTL_PROTECTED)) ==
 434             cpu_to_le16(IEEE80211_FCTL_FROMDS | IEEE80211_FTYPE_DATA)) {
 435                 dataframe = 1;
 436                 if (!group100)
 437                         print_summary = 1;      /* print each frame */
 438                 else if (priv->framecnt_to_us < 100) {
 439                         priv->framecnt_to_us++;
 440                         print_summary = 0;
 441                 } else {
 442                         priv->framecnt_to_us = 0;
 443                         print_summary = 1;
 444                         hundred = 1;
 445                 }
 446         } else {
 447                 /* print summary for all other frames */
 448                 print_summary = 1;
 449         }
 450
 451         if (print_summary) {
 452                 char *title;
 453                 int rate;
 454
 455                 if (hundred)
 456                         title = "100Frames";
 457                 else if (ieee80211_has_retry(fc))
 458                         title = "Retry";
 459                 else if (ieee80211_is_assoc_resp(fc))
 460                         title = "AscRsp";
 461                 else if (ieee80211_is_reassoc_resp(fc))
 462                         title = "RasRsp";
 463                 else if (ieee80211_is_probe_resp(fc)) {
 464                         title = "PrbRsp";
 465                         print_dump = 1; /* dump frame contents */
 466                 } else if (ieee80211_is_beacon(fc)) {
 467                         title = "Beacon";
 468                         print_dump = 1; /* dump frame contents */
 469                 } else if (ieee80211_is_atim(fc))
 470                         title = "ATIM";
 471                 else if (ieee80211_is_auth(fc))
 472                         title = "Auth";
 473                 else if (ieee80211_is_deauth(fc))
 474                         title = "DeAuth";
 475                 else if (ieee80211_is_disassoc(fc))
 476                         title = "DisAssoc";
 477                 else
 478                         title = "Frame";
 479
 480                 rate = iwl3945_hwrate_to_plcp_idx(rx_hdr->rate);
 481                 if (rate == -1)
 482                         rate = 0;
 483                 else
 484                         rate = iwl3945_rates[rate].ieee / 2;
 485
 486                 /* print frame summary.
 487                  * MAC addresses show just the last byte (for brevity),
 488                  *    but you can hack it to show more, if you'd like to. */
 489                 if (dataframe)
 490                         IWL_DEBUG_RX("%s: mhd=0x%04x, dst=0x%02x, "
 491                                      "len=%u, rssi=%d, chnl=%d, rate=%d, \n",
 492                                      title, le16_to_cpu(fc), header->addr1[5],
 493                                      length, rssi, channel, rate);
 494                 else {
 495                         /* src/dst addresses assume managed mode */
 496                         IWL_DEBUG_RX("%s: 0x%04x, dst=0x%02x, "
 497                                      "src=0x%02x, rssi=%u, tim=%lu usec, "
 498                                      "phy=0x%02x, chnl=%d\n",
 499                                      title, le16_to_cpu(fc), header->addr1[5],
 500                                      header->addr3[5], rssi,
 501                                      tsf_low - priv->scan_start_tsf,
 502                                      phy_flags, channel);
 503                 }
 504         }
 505         if (print_dump)
 506                 iwl3945_print_hex_dump(IWL_DL_RX, data, length);
 507 }
 508 #else
 509 static inline void iwl3945_dbg_report_frame(struct iwl3945_priv *priv,
 510                       struct iwl3945_rx_packet *pkt,
 511                       struct ieee80211_hdr *header, int group100)
 512 {
 513 }
 514 #endif
 515
 516 /* This is necessary only for a number of statistics, see the caller. */
 517 static int iwl3945_is_network_packet(struct iwl3945_priv *priv,
 518                 struct ieee80211_hdr *header)
 519 {
 520         /* Filter incoming packets to determine if they are targeted toward
 521          * this network, discarding packets coming from ourselves */
 522         switch (priv->iw_mode) {
 523         case IEEE80211_IF_TYPE_IBSS: /* Header: Dest. | Source    | BSSID */
 524                 /* packets to our IBSS update information */
 525                 return !compare_ether_addr(header->addr3, priv->bssid);
 526         case IEEE80211_IF_TYPE_STA: /* Header: Dest. | AP{BSSID} | Source */
 527                 /* packets to our IBSS update information */
 528                 return !compare_ether_addr(header->addr2, priv->bssid);
 529         default:
 530                 return 1;
 531         }
 532 }
 533
 534 static void iwl3945_pass_packet_to_mac80211(struct iwl3945_priv *priv,
 535                                    struct iwl3945_rx_mem_buffer *rxb,
 536                                    struct ieee80211_rx_status *stats)
 537 {
 538         struct iwl3945_rx_packet *pkt = (struct iwl3945_rx_packet *)rxb->skb->data;
 539 #ifdef CONFIG_IWL3945_LEDS
 540         struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)IWL_RX_DATA(pkt);
 541 #endif
 542         struct iwl3945_rx_frame_hdr *rx_hdr = IWL_RX_HDR(pkt);
 543         struct iwl3945_rx_frame_end *rx_end = IWL_RX_END(pkt);
 544         short len = le16_to_cpu(rx_hdr->len);
 545
 546         /* We received data from the HW, so stop the watchdog */
 547         if (unlikely((len + IWL_RX_FRAME_SIZE) > skb_tailroom(rxb->skb))) {
 548                 IWL_DEBUG_DROP("Corruption detected!\n");
 549                 return;
 550         }
 551
 552         /* We only process data packets if the interface is open */
 553         if (unlikely(!priv->is_open)) {
 554                 IWL_DEBUG_DROP_LIMIT
 555                     ("Dropping packet while interface is not open.\n");
 556                 return;
 557         }
 558
 559         skb_reserve(rxb->skb, (void *)rx_hdr->payload - (void *)pkt);
 560         /* Set the size of the skb to the size of the frame */
 561         skb_put(rxb->skb, le16_to_cpu(rx_hdr->len));
 562
 563         if (iwl3945_param_hwcrypto)
 564                 iwl3945_set_decrypted_flag(priv, rxb->skb,
 565                                        le32_to_cpu(rx_end->status), stats);
 566
 567 #ifdef CONFIG_IWL3945_LEDS
 568         if (ieee80211_is_data(hdr->frame_control))
 569                 priv->rxtxpackets += len;
 570 #endif
 571         ieee80211_rx_irqsafe(priv->hw, rxb->skb, stats);
 572         rxb->skb = NULL;
 573 }
 574
 575 #define IWL_DELAY_NEXT_SCAN_AFTER_ASSOC (HZ*6)
 576
 577 static void iwl3945_rx_reply_rx(struct iwl3945_priv *priv,
 578                                 struct iwl3945_rx_mem_buffer *rxb)
 579 {
 580         struct ieee80211_hdr *header;
 581         struct ieee80211_rx_status rx_status;
 582         struct iwl3945_rx_packet *pkt = (void *)rxb->skb->data;
 583         struct iwl3945_rx_frame_stats *rx_stats = IWL_RX_STATS(pkt);
 584         struct iwl3945_rx_frame_hdr *rx_hdr = IWL_RX_HDR(pkt);
 585         struct iwl3945_rx_frame_end *rx_end = IWL_RX_END(pkt);
 586         int snr;
 587         u16 rx_stats_sig_avg = le16_to_cpu(rx_stats->sig_avg);
 588         u16 rx_stats_noise_diff = le16_to_cpu(rx_stats->noise_diff);
 589         u8 network_packet;
 590
 591         rx_status.flag = 0;
 592         rx_status.mactime = le64_to_cpu(rx_end->timestamp);
 593         rx_status.freq =
 594                 ieee80211_channel_to_frequency(le16_to_cpu(rx_hdr->channel));
 595         rx_status.band = (rx_hdr->phy_flags & RX_RES_PHY_FLAGS_BAND_24_MSK) ?
 596                                 IEEE80211_BAND_2GHZ : IEEE80211_BAND_5GHZ;
 597
 598         rx_status.rate_idx = iwl3945_hwrate_to_plcp_idx(rx_hdr->rate);
 599         if (rx_status.band == IEEE80211_BAND_5GHZ)
 600                 rx_status.rate_idx -= IWL_FIRST_OFDM_RATE;
 601
 602         rx_status.antenna = le16_to_cpu(rx_hdr->phy_flags &
 603                                         RX_RES_PHY_FLAGS_ANTENNA_MSK) >> 4;
 604
 605         /* set the preamble flag if appropriate */
 606         if (rx_hdr->phy_flags & RX_RES_PHY_FLAGS_SHORT_PREAMBLE_MSK)
 607                 rx_status.flag |= RX_FLAG_SHORTPRE;
 608
 609         if ((unlikely(rx_stats->phy_count > 20))) {
 610                 IWL_DEBUG_DROP
 611                     ("dsp size out of range [0,20]: "
 612                      "%d/n", rx_stats->phy_count);
 613                 return;
 614         }
 615
 616         if (!(rx_end->status & RX_RES_STATUS_NO_CRC32_ERROR)
 617             || !(rx_end->status & RX_RES_STATUS_NO_RXE_OVERFLOW)) {
 618                 IWL_DEBUG_RX("Bad CRC or FIFO: 0x%08X.\n", rx_end->status);
 619                 return;
 620         }
 621
 622
 623
 624         /* Convert 3945's rssi indicator to dBm */
 625         rx_status.signal = rx_stats->rssi - IWL_RSSI_OFFSET;
 626
 627         /* Set default noise value to -127 */
 628         if (priv->last_rx_noise == 0)
 629                 priv->last_rx_noise = IWL_NOISE_MEAS_NOT_AVAILABLE;
 630
 631         /* 3945 provides noise info for OFDM frames only.
 632          * sig_avg and noise_diff are measured by the 3945's digital signal
 633          *   processor (DSP), and indicate linear levels of signal level and
 634          *   distortion/noise within the packet preamble after
 635          *   automatic gain control (AGC).  sig_avg should stay fairly
 636          *   constant if the radio's AGC is working well.
 637          * Since these values are linear (not dB or dBm), linear
 638          *   signal-to-noise ratio (SNR) is (sig_avg / noise_diff).
 639          * Convert linear SNR to dB SNR, then subtract that from rssi dBm
 640          *   to obtain noise level in dBm.
 641          * Calculate rx_status.signal (quality indicator in %) based on SNR. */
 642         if (rx_stats_noise_diff) {
 643                 snr = rx_stats_sig_avg / rx_stats_noise_diff;
 644                 rx_status.noise = rx_status.signal -
 645                                         iwl3945_calc_db_from_ratio(snr);
 646                 rx_status.qual = iwl3945_calc_sig_qual(rx_status.signal,
 647                                                          rx_status.noise);
 648
 649         /* If noise info not available, calculate signal quality indicator (%)
 650          *   using just the dBm signal level. */
 651         } else {
 652                 rx_status.noise = priv->last_rx_noise;
 653                 rx_status.qual = iwl3945_calc_sig_qual(rx_status.signal, 0);
 654         }
 655
 656
 657         IWL_DEBUG_STATS("Rssi %d noise %d qual %d sig_avg %d noise_diff %d\n",
 658                         rx_status.signal, rx_status.noise, rx_status.qual,
 659                         rx_stats_sig_avg, rx_stats_noise_diff);
 660
 661         header = (struct ieee80211_hdr *)IWL_RX_DATA(pkt);
 662
 663         network_packet = iwl3945_is_network_packet(priv, header);
 664
 665         IWL_DEBUG_STATS_LIMIT("[%c] %d RSSI:%d Signal:%u, Noise:%u, Rate:%u\n",
 666                               network_packet ? '*' : ' ',
 667                               le16_to_cpu(rx_hdr->channel),
 668                               rx_status.signal, rx_status.signal,
 669                               rx_status.noise, rx_status.rate_idx);
 670
 671 #ifdef CONFIG_IWL3945_DEBUG
 672         if (iwl3945_debug_level & (IWL_DL_RX))
 673                 /* Set "1" to report good data frames in groups of 100 */
 674                 iwl3945_dbg_report_frame(priv, pkt, header, 1);
 675 #endif
 676
 677         if (network_packet) {
 678                 priv->last_beacon_time = le32_to_cpu(rx_end->beacon_timestamp);
 679                 priv->last_tsf = le64_to_cpu(rx_end->timestamp);
 680                 priv->last_rx_rssi = rx_status.signal;
 681                 priv->last_rx_noise = rx_status.noise;
 682         }
 683
 684         iwl3945_pass_packet_to_mac80211(priv, rxb, &rx_status);
 685 }
 686
 687 int iwl3945_hw_txq_attach_buf_to_tfd(struct iwl3945_priv *priv, void *ptr,
 688                                  dma_addr_t addr, u16 len)
 689 {
 690         int count;
 691         u32 pad;
 692         struct iwl3945_tfd_frame *tfd = (struct iwl3945_tfd_frame *)ptr;
 693
 694         count = TFD_CTL_COUNT_GET(le32_to_cpu(tfd->control_flags));
 695         pad = TFD_CTL_PAD_GET(le32_to_cpu(tfd->control_flags));
 696
 697         if ((count >= NUM_TFD_CHUNKS) || (count < 0)) {
 698                 IWL_ERROR("Error can not send more than %d chunks\n",
 699                           NUM_TFD_CHUNKS);
 700                 return -EINVAL;
 701         }
 702
 703         tfd->pa[count].addr = cpu_to_le32(addr);
 704         tfd->pa[count].len = cpu_to_le32(len);
 705
 706         count++;
 707
 708         tfd->control_flags = cpu_to_le32(TFD_CTL_COUNT_SET(count) |
 709                                          TFD_CTL_PAD_SET(pad));
 710
 711         return 0;
 712 }
 713
 714 /**
 715  * iwl3945_hw_txq_free_tfd - Free one TFD, those at index [txq->q.read_ptr]
 716  *
 717  * Does NOT advance any indexes
 718  */
 719 int iwl3945_hw_txq_free_tfd(struct iwl3945_priv *priv, struct iwl3945_tx_queue *txq)
 720 {
 721         struct iwl3945_tfd_frame *bd_tmp = (struct iwl3945_tfd_frame *)&txq->bd[0];
 722         struct iwl3945_tfd_frame *bd = &bd_tmp[txq->q.read_ptr];
 723         struct pci_dev *dev = priv->pci_dev;
 724         int i;
 725         int counter;
 726
 727         /* classify bd */
 728         if (txq->q.id == IWL_CMD_QUEUE_NUM)
 729                 /* nothing to cleanup after for host commands */
 730                 return 0;
 731
 732         /* sanity check */
 733         counter = TFD_CTL_COUNT_GET(le32_to_cpu(bd->control_flags));
 734         if (counter > NUM_TFD_CHUNKS) {
 735                 IWL_ERROR("Too many chunks: %i\n", counter);
 736                 /* @todo issue fatal error, it is quite serious situation */
 737                 return 0;
 738         }
 739
 740         /* unmap chunks if any */
 741
 742         for (i = 1; i < counter; i++) {
 743                 pci_unmap_single(dev, le32_to_cpu(bd->pa[i].addr),
 744                                  le32_to_cpu(bd->pa[i].len), PCI_DMA_TODEVICE);
 745                 if (txq->txb[txq->q.read_ptr].skb[0]) {
 746                         struct sk_buff *skb = txq->txb[txq->q.read_ptr].skb[0];
 747                         if (txq->txb[txq->q.read_ptr].skb[0]) {
 748                                 /* Can be called from interrupt context */
 749                                 dev_kfree_skb_any(skb);
 750                                 txq->txb[txq->q.read_ptr].skb[0] = NULL;
 751                         }
 752                 }
 753         }
 754         return 0;
 755 }
 756
 757 u8 iwl3945_hw_find_station(struct iwl3945_priv *priv, const u8 *addr)
 758 {
 759         int i;
 760         int ret = IWL_INVALID_STATION;
 761         unsigned long flags;
 762         DECLARE_MAC_BUF(mac);
 763
 764         spin_lock_irqsave(&priv->sta_lock, flags);
 765         for (i = IWL_STA_ID; i < priv->hw_setting.max_stations; i++)
 766                 if ((priv->stations[i].used) &&
 767                     (!compare_ether_addr
 768                      (priv->stations[i].sta.sta.addr, addr))) {
 769                         ret = i;
 770                         goto out;
 771                 }
 772
 773         IWL_DEBUG_INFO("can not find STA %s (total %d)\n",
 774                        print_mac(mac, addr), priv->num_stations);
 775  out:
 776         spin_unlock_irqrestore(&priv->sta_lock, flags);
 777         return ret;
 778 }
 779
 780 /**
 781  * iwl3945_hw_build_tx_cmd_rate - Add rate portion to TX_CMD:
 782  *
 783 */
 784 void iwl3945_hw_build_tx_cmd_rate(struct iwl3945_priv *priv,
 785                               struct iwl3945_cmd *cmd,
 786                               struct ieee80211_tx_info *info,
 787                               struct ieee80211_hdr *hdr, int sta_id, int tx_id)
 788 {
 789         unsigned long flags;
 790         u16 hw_value = ieee80211_get_tx_rate(priv->hw, info)->hw_value;
 791         u16 rate_index = min(hw_value & 0xffff, IWL_RATE_COUNT - 1);
 792         u16 rate_mask;
 793         int rate;
 794         u8 rts_retry_limit;
 795         u8 data_retry_limit;
 796         __le32 tx_flags;
 797         __le16 fc = hdr->frame_control;
 798
 799         rate = iwl3945_rates[rate_index].plcp;
 800         tx_flags = cmd->cmd.tx.tx_flags;
 801
 802         /* We need to figure out how to get the sta->supp_rates while
 803          * in this running context */
 804         rate_mask = IWL_RATES_MASK;
 805
 806         spin_lock_irqsave(&priv->sta_lock, flags);
 807
 808         priv->stations[sta_id].current_rate.rate_n_flags = rate;
 809
 810         if ((priv->iw_mode == IEEE80211_IF_TYPE_IBSS) &&
 811             (sta_id != priv->hw_setting.bcast_sta_id) &&
 812                 (sta_id != IWL_MULTICAST_ID))
 813                 priv->stations[IWL_STA_ID].current_rate.rate_n_flags = rate;
 814
 815         spin_unlock_irqrestore(&priv->sta_lock, flags);
 816
 817         if (tx_id >= IWL_CMD_QUEUE_NUM)
 818                 rts_retry_limit = 3;
 819         else
 820                 rts_retry_limit = 7;
 821
 822         if (ieee80211_is_probe_resp(fc)) {
 823                 data_retry_limit = 3;
 824                 if (data_retry_limit < rts_retry_limit)
 825                         rts_retry_limit = data_retry_limit;
 826         } else
 827                 data_retry_limit = IWL_DEFAULT_TX_RETRY;
 828
 829         if (priv->data_retry_limit != -1)
 830                 data_retry_limit = priv->data_retry_limit;
 831
 832         if (ieee80211_is_mgmt(fc)) {
 833                 switch (fc & cpu_to_le16(IEEE80211_FCTL_STYPE)) {
 834                 case cpu_to_le16(IEEE80211_STYPE_AUTH):
 835                 case cpu_to_le16(IEEE80211_STYPE_DEAUTH):
 836                 case cpu_to_le16(IEEE80211_STYPE_ASSOC_REQ):
 837                 case cpu_to_le16(IEEE80211_STYPE_REASSOC_REQ):
 838                         if (tx_flags & TX_CMD_FLG_RTS_MSK) {
 839                                 tx_flags &= ~TX_CMD_FLG_RTS_MSK;
 840                                 tx_flags |= TX_CMD_FLG_CTS_MSK;
 841                         }
 842                         break;
 843                 default:
 844                         break;
 845                 }
 846         }
 847
 848         cmd->cmd.tx.rts_retry_limit = rts_retry_limit;
 849         cmd->cmd.tx.data_retry_limit = data_retry_limit;
 850         cmd->cmd.tx.rate = rate;
 851         cmd->cmd.tx.tx_flags = tx_flags;
 852
 853         /* OFDM */
 854         cmd->cmd.tx.supp_rates[0] =
 855            ((rate_mask & IWL_OFDM_RATES_MASK) >> IWL_FIRST_OFDM_RATE) & 0xFF;
 856
 857         /* CCK */
 858         cmd->cmd.tx.supp_rates[1] = (rate_mask & 0xF);
 859
 860         IWL_DEBUG_RATE("Tx sta id: %d, rate: %d (plcp), flags: 0x%4X "
 861                        "cck/ofdm mask: 0x%x/0x%x\n", sta_id,
 862                        cmd->cmd.tx.rate, le32_to_cpu(cmd->cmd.tx.tx_flags),
 863                        cmd->cmd.tx.supp_rates[1], cmd->cmd.tx.supp_rates[0]);
 864 }
 865
 866 u8 iwl3945_sync_sta(struct iwl3945_priv *priv, int sta_id, u16 tx_rate, u8 flags)
 867 {
 868         unsigned long flags_spin;
 869         struct iwl3945_station_entry *station;
 870
 871         if (sta_id == IWL_INVALID_STATION)
 872                 return IWL_INVALID_STATION;
 873
 874         spin_lock_irqsave(&priv->sta_lock, flags_spin);
 875         station = &priv->stations[sta_id];
 876
 877         station->sta.sta.modify_mask = STA_MODIFY_TX_RATE_MSK;
 878         station->sta.rate_n_flags = cpu_to_le16(tx_rate);
 879         station->current_rate.rate_n_flags = tx_rate;
 880         station->sta.mode = STA_CONTROL_MODIFY_MSK;
 881
 882         spin_unlock_irqrestore(&priv->sta_lock, flags_spin);
 883
 884         iwl3945_send_add_station(priv, &station->sta, flags);
 885         IWL_DEBUG_RATE("SCALE sync station %d to rate %d\n",
 886                         sta_id, tx_rate);
 887         return sta_id;
 888 }
 889
 890 static int iwl3945_nic_set_pwr_src(struct iwl3945_priv *priv, int pwr_max)
 891 {
 892         int rc;
 893         unsigned long flags;
 894
 895         spin_lock_irqsave(&priv->lock, flags);
 896         rc = iwl3945_grab_nic_access(priv);
 897         if (rc) {
 898                 spin_unlock_irqrestore(&priv->lock, flags);
 899                 return rc;
 900         }
 901
 902         if (!pwr_max) {
 903                 u32 val;
 904
 905                 rc = pci_read_config_dword(priv->pci_dev,
 906                                 PCI_POWER_SOURCE, &val);
 907                 if (val & PCI_CFG_PMC_PME_FROM_D3COLD_SUPPORT) {
 908                         iwl3945_set_bits_mask_prph(priv, APMG_PS_CTRL_REG,
 909                                         APMG_PS_CTRL_VAL_PWR_SRC_VAUX,
 910                                         ~APMG_PS_CTRL_MSK_PWR_SRC);
 911                         iwl3945_release_nic_access(priv);
 912
 913                         iwl3945_poll_bit(priv, CSR_GPIO_IN,
 914                                      CSR_GPIO_IN_VAL_VAUX_PWR_SRC,
 915                                      CSR_GPIO_IN_BIT_AUX_POWER, 5000);
 916                 } else
 917                         iwl3945_release_nic_access(priv);
 918         } else {
 919                 iwl3945_set_bits_mask_prph(priv, APMG_PS_CTRL_REG,
 920                                 APMG_PS_CTRL_VAL_PWR_SRC_VMAIN,
 921                                 ~APMG_PS_CTRL_MSK_PWR_SRC);
 922
 923                 iwl3945_release_nic_access(priv);
 924                 iwl3945_poll_bit(priv, CSR_GPIO_IN, CSR_GPIO_IN_VAL_VMAIN_PWR_SRC,
 925                              CSR_GPIO_IN_BIT_AUX_POWER, 5000);  /* uS */
 926         }
 927         spin_unlock_irqrestore(&priv->lock, flags);
 928
 929         return rc;
 930 }
 931
 932 static int iwl3945_rx_init(struct iwl3945_priv *priv, struct iwl3945_rx_queue *rxq)
 933 {
 934         int rc;
 935         unsigned long flags;
 936
 937         spin_lock_irqsave(&priv->lock, flags);
 938         rc = iwl3945_grab_nic_access(priv);
 939         if (rc) {
 940                 spin_unlock_irqrestore(&priv->lock, flags);
 941                 return rc;
 942         }
 943
 944         iwl3945_write_direct32(priv, FH_RCSR_RBD_BASE(0), rxq->dma_addr);
 945         iwl3945_write_direct32(priv, FH_RCSR_RPTR_ADDR(0),
 946                              priv->hw_setting.shared_phys +
 947                              offsetof(struct iwl3945_shared, rx_read_ptr[0]));
 948         iwl3945_write_direct32(priv, FH_RCSR_WPTR(0), 0);
 949         iwl3945_write_direct32(priv, FH_RCSR_CONFIG(0),
 950                 ALM_FH_RCSR_RX_CONFIG_REG_VAL_DMA_CHNL_EN_ENABLE |
 951                 ALM_FH_RCSR_RX_CONFIG_REG_VAL_RDRBD_EN_ENABLE |
 952                 ALM_FH_RCSR_RX_CONFIG_REG_BIT_WR_STTS_EN |
 953                 ALM_FH_RCSR_RX_CONFIG_REG_VAL_MAX_FRAG_SIZE_128 |
 954                 (RX_QUEUE_SIZE_LOG << ALM_FH_RCSR_RX_CONFIG_REG_POS_RBDC_SIZE) |
 955                 ALM_FH_RCSR_RX_CONFIG_REG_VAL_IRQ_DEST_INT_HOST |
 956                 (1 << ALM_FH_RCSR_RX_CONFIG_REG_POS_IRQ_RBTH) |
 957                 ALM_FH_RCSR_RX_CONFIG_REG_VAL_MSG_MODE_FH);
 958
 959         /* fake read to flush all prev I/O */
 960         iwl3945_read_direct32(priv, FH_RSSR_CTRL);
 961
 962         iwl3945_release_nic_access(priv);
 963         spin_unlock_irqrestore(&priv->lock, flags);
 964
 965         return 0;
 966 }
 967
 968 static int iwl3945_tx_reset(struct iwl3945_priv *priv)
 969 {
 970         int rc;
 971         unsigned long flags;
 972
 973         spin_lock_irqsave(&priv->lock, flags);
 974         rc = iwl3945_grab_nic_access(priv);
 975         if (rc) {
 976                 spin_unlock_irqrestore(&priv->lock, flags);
 977                 return rc;
 978         }
 979
 980         /* bypass mode */
 981         iwl3945_write_prph(priv, ALM_SCD_MODE_REG, 0x2);
 982
 983         /* RA 0 is active */
 984         iwl3945_write_prph(priv, ALM_SCD_ARASTAT_REG, 0x01);
 985
 986         /* all 6 fifo are active */
 987         iwl3945_write_prph(priv, ALM_SCD_TXFACT_REG, 0x3f);
 988
 989         iwl3945_write_prph(priv, ALM_SCD_SBYP_MODE_1_REG, 0x010000);
 990         iwl3945_write_prph(priv, ALM_SCD_SBYP_MODE_2_REG, 0x030002);
 991         iwl3945_write_prph(priv, ALM_SCD_TXF4MF_REG, 0x000004);
 992         iwl3945_write_prph(priv, ALM_SCD_TXF5MF_REG, 0x000005);
 993
 994         iwl3945_write_direct32(priv, FH_TSSR_CBB_BASE,
 995                              priv->hw_setting.shared_phys);
 996
 997         iwl3945_write_direct32(priv, FH_TSSR_MSG_CONFIG,
 998                 ALM_FH_TSSR_TX_MSG_CONFIG_REG_VAL_SNOOP_RD_TXPD_ON |
 999                 ALM_FH_TSSR_TX_MSG_CONFIG_REG_VAL_ORDER_RD_TXPD_ON |
1000                 ALM_FH_TSSR_TX_MSG_CONFIG_REG_VAL_MAX_FRAG_SIZE_128B |
1001                 ALM_FH_TSSR_TX_MSG_CONFIG_REG_VAL_SNOOP_RD_TFD_ON |
1002                 ALM_FH_TSSR_TX_MSG_CONFIG_REG_VAL_ORDER_RD_CBB_ON |
1003                 ALM_FH_TSSR_TX_MSG_CONFIG_REG_VAL_ORDER_RSP_WAIT_TH |
1004                 ALM_FH_TSSR_TX_MSG_CONFIG_REG_VAL_RSP_WAIT_TH);
1005
1006         iwl3945_release_nic_access(priv);
1007         spin_unlock_irqrestore(&priv->lock, flags);
1008
1009         return 0;
1010 }
1011
1012 /**
1013  * iwl3945_txq_ctx_reset - Reset TX queue context
1014  *
1015  * Destroys all DMA structures and initialize them again
1016  */
1017 static int iwl3945_txq_ctx_reset(struct iwl3945_priv *priv)
1018 {
1019         int rc;
1020         int txq_id, slots_num;
1021
1022         iwl3945_hw_txq_ctx_free(priv);
1023
1024         /* Tx CMD queue */
1025         rc = iwl3945_tx_reset(priv);
1026         if (rc)
1027                 goto error;
1028
1029         /* Tx queue(s) */
1030         for (txq_id = 0; txq_id < TFD_QUEUE_MAX; txq_id++) {
1031                 slots_num = (txq_id == IWL_CMD_QUEUE_NUM) ?
1032                                 TFD_CMD_SLOTS : TFD_TX_CMD_SLOTS;
1033                 rc = iwl3945_tx_queue_init(priv, &priv->txq[txq_id], slots_num,
1034                                 txq_id);
1035                 if (rc) {
1036                         IWL_ERROR("Tx %d queue init failed\n", txq_id);
1037                         goto error;
1038                 }
1039         }
1040
1041         return rc;
1042
1043  error:
1044         iwl3945_hw_txq_ctx_free(priv);
1045         return rc;
1046 }
1047
1048 int iwl3945_hw_nic_init(struct iwl3945_priv *priv)
1049 {
1050         u8 rev_id;
1051         int rc;
1052         unsigned long flags;
1053         struct iwl3945_rx_queue *rxq = &priv->rxq;
1054
1055         iwl3945_power_init_handle(priv);
1056
1057         spin_lock_irqsave(&priv->lock, flags);
1058         iwl3945_set_bit(priv, CSR_ANA_PLL_CFG, CSR39_ANA_PLL_CFG_VAL);
1059         iwl3945_set_bit(priv, CSR_GIO_CHICKEN_BITS,
1060                     CSR_GIO_CHICKEN_BITS_REG_BIT_L1A_NO_L0S_RX);
1061
1062         iwl3945_set_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
1063         rc = iwl3945_poll_bit(priv, CSR_GP_CNTRL,
1064                           CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY,
1065                           CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, 25000);
1066         if (rc < 0) {
1067                 spin_unlock_irqrestore(&priv->lock, flags);
1068                 IWL_DEBUG_INFO("Failed to init the card\n");
1069                 return rc;
1070         }
1071
1072         rc = iwl3945_grab_nic_access(priv);
1073         if (rc) {
1074                 spin_unlock_irqrestore(&priv->lock, flags);
1075                 return rc;
1076         }
1077         iwl3945_write_prph(priv, APMG_CLK_EN_REG,
1078                                  APMG_CLK_VAL_DMA_CLK_RQT |
1079                                  APMG_CLK_VAL_BSM_CLK_RQT);
1080         udelay(20);
1081         iwl3945_set_bits_prph(priv, APMG_PCIDEV_STT_REG,
1082                                     APMG_PCIDEV_STT_VAL_L1_ACT_DIS);
1083         iwl3945_release_nic_access(priv);
1084         spin_unlock_irqrestore(&priv->lock, flags);
1085
1086         /* Determine HW type */
1087         rc = pci_read_config_byte(priv->pci_dev, PCI_REVISION_ID, &rev_id);
1088         if (rc)
1089                 return rc;
1090         IWL_DEBUG_INFO("HW Revision ID = 0x%X\n", rev_id);
1091
1092         iwl3945_nic_set_pwr_src(priv, 1);
1093         spin_lock_irqsave(&priv->lock, flags);
1094
1095         if (rev_id & PCI_CFG_REV_ID_BIT_RTP)
1096                 IWL_DEBUG_INFO("RTP type \n");
1097         else if (rev_id & PCI_CFG_REV_ID_BIT_BASIC_SKU) {
1098                 IWL_DEBUG_INFO("3945 RADIO-MB type\n");
1099                 iwl3945_set_bit(priv, CSR_HW_IF_CONFIG_REG,
1100                             CSR39_HW_IF_CONFIG_REG_BIT_3945_MB);
1101         } else {
1102                 IWL_DEBUG_INFO("3945 RADIO-MM type\n");
1103                 iwl3945_set_bit(priv, CSR_HW_IF_CONFIG_REG,
1104                             CSR39_HW_IF_CONFIG_REG_BIT_3945_MM);
1105         }
1106
1107         if (EEPROM_SKU_CAP_OP_MODE_MRC == priv->eeprom.sku_cap) {
1108                 IWL_DEBUG_INFO("SKU OP mode is mrc\n");
1109                 iwl3945_set_bit(priv, CSR_HW_IF_CONFIG_REG,
1110                             CSR39_HW_IF_CONFIG_REG_BIT_SKU_MRC);
1111         } else
1112                 IWL_DEBUG_INFO("SKU OP mode is basic\n");
1113
1114         if ((priv->eeprom.board_revision & 0xF0) == 0xD0) {
1115                 IWL_DEBUG_INFO("3945ABG revision is 0x%X\n",
1116                                priv->eeprom.board_revision);
1117                 iwl3945_set_bit(priv, CSR_HW_IF_CONFIG_REG,
1118                             CSR39_HW_IF_CONFIG_REG_BIT_BOARD_TYPE);
1119         } else {
1120                 IWL_DEBUG_INFO("3945ABG revision is 0x%X\n",
1121                                priv->eeprom.board_revision);
1122                 iwl3945_clear_bit(priv, CSR_HW_IF_CONFIG_REG,
1123                               CSR39_HW_IF_CONFIG_REG_BIT_BOARD_TYPE);
1124         }
1125
1126         if (priv->eeprom.almgor_m_version <= 1) {
1127                 iwl3945_set_bit(priv, CSR_HW_IF_CONFIG_REG,
1128                             CSR39_HW_IF_CONFIG_REG_BITS_SILICON_TYPE_A);
1129                 IWL_DEBUG_INFO("Card M type A version is 0x%X\n",
1130                                priv->eeprom.almgor_m_version);
1131         } else {
1132                 IWL_DEBUG_INFO("Card M type B version is 0x%X\n",
1133                                priv->eeprom.almgor_m_version);
1134                 iwl3945_set_bit(priv, CSR_HW_IF_CONFIG_REG,
1135                             CSR39_HW_IF_CONFIG_REG_BITS_SILICON_TYPE_B);
1136         }
1137         spin_unlock_irqrestore(&priv->lock, flags);
1138
1139         if (priv->eeprom.sku_cap & EEPROM_SKU_CAP_SW_RF_KILL_ENABLE)
1140                 IWL_DEBUG_RF_KILL("SW RF KILL supported in EEPROM.\n");
1141
1142         if (priv->eeprom.sku_cap & EEPROM_SKU_CAP_HW_RF_KILL_ENABLE)
1143                 IWL_DEBUG_RF_KILL("HW RF KILL supported in EEPROM.\n");
1144
1145         /* Allocate the RX queue, or reset if it is already allocated */
1146         if (!rxq->bd) {
1147                 rc = iwl3945_rx_queue_alloc(priv);
1148                 if (rc) {
1149                         IWL_ERROR("Unable to initialize Rx queue\n");
1150                         return -ENOMEM;
1151                 }
1152         } else
1153                 iwl3945_rx_queue_reset(priv, rxq);
1154
1155         iwl3945_rx_replenish(priv);
1156
1157         iwl3945_rx_init(priv, rxq);
1158
1159         spin_lock_irqsave(&priv->lock, flags);
1160
1161         /* Look at using this instead:
1162         rxq->need_update = 1;
1163         iwl3945_rx_queue_update_write_ptr(priv, rxq);
1164         */
1165
1166         rc = iwl3945_grab_nic_access(priv);
1167         if (rc) {
1168                 spin_unlock_irqrestore(&priv->lock, flags);
1169                 return rc;
1170         }
1171         iwl3945_write_direct32(priv, FH_RCSR_WPTR(0), rxq->write & ~7);
1172         iwl3945_release_nic_access(priv);
1173
1174         spin_unlock_irqrestore(&priv->lock, flags);
1175
1176         rc = iwl3945_txq_ctx_reset(priv);
1177         if (rc)
1178                 return rc;
1179
1180         set_bit(STATUS_INIT, &priv->status);
1181
1182         return 0;
1183 }
1184
1185 /**
1186  * iwl3945_hw_txq_ctx_free - Free TXQ Context
1187  *
1188  * Destroy all TX DMA queues and structures
1189  */
1190 void iwl3945_hw_txq_ctx_free(struct iwl3945_priv *priv)
1191 {
1192         int txq_id;
1193
1194         /* Tx queues */
1195         for (txq_id = 0; txq_id < TFD_QUEUE_MAX; txq_id++)
1196                 iwl3945_tx_queue_free(priv, &priv->txq[txq_id]);
1197 }
1198
1199 void iwl3945_hw_txq_ctx_stop(struct iwl3945_priv *priv)
1200 {
1201         int queue;
1202         unsigned long flags;
1203
1204         spin_lock_irqsave(&priv->lock, flags);
1205         if (iwl3945_grab_nic_access(priv)) {
1206                 spin_unlock_irqrestore(&priv->lock, flags);
1207                 iwl3945_hw_txq_ctx_free(priv);
1208                 return;
1209         }
1210
1211         /* stop SCD */
1212         iwl3945_write_prph(priv, ALM_SCD_MODE_REG, 0);
1213
1214         /* reset TFD queues */
1215         for (queue = TFD_QUEUE_MIN; queue < TFD_QUEUE_MAX; queue++) {
1216                 iwl3945_write_direct32(priv, FH_TCSR_CONFIG(queue), 0x0);
1217                 iwl3945_poll_direct_bit(priv, FH_TSSR_TX_STATUS,
1218                                 ALM_FH_TSSR_TX_STATUS_REG_MSK_CHNL_IDLE(queue),
1219                                 1000);
1220         }
1221
1222         iwl3945_release_nic_access(priv);
1223         spin_unlock_irqrestore(&priv->lock, flags);
1224
1225         iwl3945_hw_txq_ctx_free(priv);
1226 }
1227
1228 int iwl3945_hw_nic_stop_master(struct iwl3945_priv *priv)
1229 {
1230         int rc = 0;
1231         u32 reg_val;
1232         unsigned long flags;
1233
1234         spin_lock_irqsave(&priv->lock, flags);
1235
1236         /* set stop master bit */
1237         iwl3945_set_bit(priv, CSR_RESET, CSR_RESET_REG_FLAG_STOP_MASTER);
1238
1239         reg_val = iwl3945_read32(priv, CSR_GP_CNTRL);
1240
1241         if (CSR_GP_CNTRL_REG_FLAG_MAC_POWER_SAVE ==
1242             (reg_val & CSR_GP_CNTRL_REG_MSK_POWER_SAVE_TYPE))
1243                 IWL_DEBUG_INFO("Card in power save, master is already "
1244                                "stopped\n");
1245         else {
1246                 rc = iwl3945_poll_bit(priv, CSR_RESET,
1247                                   CSR_RESET_REG_FLAG_MASTER_DISABLED,
1248                                   CSR_RESET_REG_FLAG_MASTER_DISABLED, 100);
1249                 if (rc < 0) {
1250                         spin_unlock_irqrestore(&priv->lock, flags);
1251                         return rc;
1252                 }
1253         }
1254
1255         spin_unlock_irqrestore(&priv->lock, flags);
1256         IWL_DEBUG_INFO("stop master\n");
1257
1258         return rc;
1259 }
1260
1261 int iwl3945_hw_nic_reset(struct iwl3945_priv *priv)
1262 {
1263         int rc;
1264         unsigned long flags;
1265
1266         iwl3945_hw_nic_stop_master(priv);
1267
1268         spin_lock_irqsave(&priv->lock, flags);
1269
1270         iwl3945_set_bit(priv, CSR_RESET, CSR_RESET_REG_FLAG_SW_RESET);
1271
1272         rc = iwl3945_poll_bit(priv, CSR_GP_CNTRL,
1273                           CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY,
1274                           CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, 25000);
1275
1276         rc = iwl3945_grab_nic_access(priv);
1277         if (!rc) {
1278                 iwl3945_write_prph(priv, APMG_CLK_CTRL_REG,
1279                                          APMG_CLK_VAL_BSM_CLK_RQT);
1280
1281                 udelay(10);
1282
1283                 iwl3945_set_bit(priv, CSR_GP_CNTRL,
1284                             CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
1285
1286                 iwl3945_write_prph(priv, APMG_RTC_INT_MSK_REG, 0x0);
1287                 iwl3945_write_prph(priv, APMG_RTC_INT_STT_REG,
1288                                         0xFFFFFFFF);
1289
1290                 /* enable DMA */
1291                 iwl3945_write_prph(priv, APMG_CLK_EN_REG,
1292                                          APMG_CLK_VAL_DMA_CLK_RQT |
1293                                          APMG_CLK_VAL_BSM_CLK_RQT);
1294                 udelay(10);
1295
1296                 iwl3945_set_bits_prph(priv, APMG_PS_CTRL_REG,
1297                                 APMG_PS_CTRL_VAL_RESET_REQ);
1298                 udelay(5);
1299                 iwl3945_clear_bits_prph(priv, APMG_PS_CTRL_REG,
1300                                 APMG_PS_CTRL_VAL_RESET_REQ);
1301                 iwl3945_release_nic_access(priv);
1302         }
1303
1304         /* Clear the 'host command active' bit... */
1305         clear_bit(STATUS_HCMD_ACTIVE, &priv->status);
1306
1307         wake_up_interruptible(&priv->wait_command_queue);
1308         spin_unlock_irqrestore(&priv->lock, flags);
1309
1310         return rc;
1311 }
1312
1313 /**
1314  * iwl3945_hw_reg_adjust_power_by_temp
1315  * return index delta into power gain settings table
1316 */
1317 static int iwl3945_hw_reg_adjust_power_by_temp(int new_reading, int old_reading)
1318 {
1319         return (new_reading - old_reading) * (-11) / 100;
1320 }
1321
1322 /**
1323  * iwl3945_hw_reg_temp_out_of_range - Keep temperature in sane range
1324  */
1325 static inline int iwl3945_hw_reg_temp_out_of_range(int temperature)
1326 {
1327         return ((temperature < -260) || (temperature > 25)) ? 1 : 0;
1328 }
1329
1330 int iwl3945_hw_get_temperature(struct iwl3945_priv *priv)
1331 {
1332         return iwl3945_read32(priv, CSR_UCODE_DRV_GP2);
1333 }
1334
1335 /**
1336  * iwl3945_hw_reg_txpower_get_temperature
1337  * get the current temperature by reading from NIC
1338 */
1339 static int iwl3945_hw_reg_txpower_get_temperature(struct iwl3945_priv *priv)
1340 {
1341         int temperature;
1342
1343         temperature = iwl3945_hw_get_temperature(priv);
1344
1345         /* driver's okay range is -260 to +25.
1346          *   human readable okay range is 0 to +285 */
1347         IWL_DEBUG_INFO("Temperature: %d\n", temperature + IWL_TEMP_CONVERT);
1348
1349         /* handle insane temp reading */
1350         if (iwl3945_hw_reg_temp_out_of_range(temperature)) {
1351                 IWL_ERROR("Error bad temperature value  %d\n", temperature);
1352
1353                 /* if really really hot(?),
1354                  *   substitute the 3rd band/group's temp measured at factory */
1355                 if (priv->last_temperature > 100)
1356                         temperature = priv->eeprom.groups[2].temperature;
1357                 else /* else use most recent "sane" value from driver */
1358                         temperature = priv->last_temperature;
1359         }
1360
1361         return temperature;     /* raw, not "human readable" */
1362 }
1363
1364 /* Adjust Txpower only if temperature variance is greater than threshold.
1365  *
1366  * Both are lower than older versions' 9 degrees */
1367 #define IWL_TEMPERATURE_LIMIT_TIMER   6
1368
1369 /**
1370  * is_temp_calib_needed - determines if new calibration is needed
1371  *
1372  * records new temperature in tx_mgr->temperature.
1373  * replaces tx_mgr->last_temperature *only* if calib needed
1374  *    (assumes caller will actually do the calibration!). */
1375 static int is_temp_calib_needed(struct iwl3945_priv *priv)
1376 {
1377         int temp_diff;
1378
1379         priv->temperature = iwl3945_hw_reg_txpower_get_temperature(priv);
1380         temp_diff = priv->temperature - priv->last_temperature;
1381
1382         /* get absolute value */
1383         if (temp_diff < 0) {
1384                 IWL_DEBUG_POWER("Getting cooler, delta %d,\n", temp_diff);
1385                 temp_diff = -temp_diff;
1386         } else if (temp_diff == 0)
1387                 IWL_DEBUG_POWER("Same temp,\n");
1388         else
1389                 IWL_DEBUG_POWER("Getting warmer, delta %d,\n", temp_diff);
1390
1391         /* if we don't need calibration, *don't* update last_temperature */
1392         if (temp_diff < IWL_TEMPERATURE_LIMIT_TIMER) {
1393                 IWL_DEBUG_POWER("Timed thermal calib not needed\n");
1394                 return 0;
1395         }
1396
1397         IWL_DEBUG_POWER("Timed thermal calib needed\n");
1398
1399         /* assume that caller will actually do calib ...
1400          *   update the "last temperature" value */
1401         priv->last_temperature = priv->temperature;
1402         return 1;
1403 }
1404
1405 #define IWL_MAX_GAIN_ENTRIES 78
1406 #define IWL_CCK_FROM_OFDM_POWER_DIFF  -5
1407 #define IWL_CCK_FROM_OFDM_INDEX_DIFF (10)
1408
1409 /* radio and DSP power table, each step is 1/2 dB.
1410  * 1st number is for RF analog gain, 2nd number is for DSP pre-DAC gain. */
1411 static struct iwl3945_tx_power power_gain_table[2][IWL_MAX_GAIN_ENTRIES] = {
1412         {
1413          {251, 127},            /* 2.4 GHz, highest power */
1414          {251, 127},
1415          {251, 127},
1416          {251, 127},
1417          {251, 125},
1418          {251, 110},
1419          {251, 105},
1420          {251, 98},
1421          {187, 125},
1422          {187, 115},
1423          {187, 108},
1424          {187, 99},
1425          {243, 119},
1426          {243, 111},
1427          {243, 105},
1428          {243, 97},
1429          {243, 92},
1430          {211, 106},
1431          {211, 100},
1432          {179, 120},
1433          {179, 113},
1434          {179, 107},
1435          {147, 125},
1436          {147, 119},
1437          {147, 112},
1438          {147, 106},
1439          {147, 101},
1440          {147, 97},
1441          {147, 91},
1442          {115, 107},
1443          {235, 121},
1444          {235, 115},
1445          {235, 109},
1446          {203, 127},
1447          {203, 121},
1448          {203, 115},
1449          {203, 108},
1450          {203, 102},
1451          {203, 96},
1452          {203, 92},
1453          {171, 110},
1454          {171, 104},
1455          {171, 98},
1456          {139, 116},
1457          {227, 125},
1458          {227, 119},
1459          {227, 113},
1460          {227, 107},
1461          {227, 101},
1462          {227, 96},
1463          {195, 113},
1464          {195, 106},
1465          {195, 102},
1466          {195, 95},
1467          {163, 113},
1468          {163, 106},
1469          {163, 102},
1470          {163, 95},
1471          {131, 113},
1472          {131, 106},
1473          {131, 102},
1474          {131, 95},
1475          {99, 113},
1476          {99, 106},
1477          {99, 102},
1478          {99, 95},
1479          {67, 113},
1480          {67, 106},
1481          {67, 102},
1482          {67, 95},
1483          {35, 113},
1484          {35, 106},
1485          {35, 102},
1486          {35, 95},
1487          {3, 113},
1488          {3, 106},
1489          {3, 102},
1490          {3, 95} },             /* 2.4 GHz, lowest power */
1491         {
1492          {251, 127},            /* 5.x GHz, highest power */
1493          {251, 120},
1494          {251, 114},
1495          {219, 119},
1496          {219, 101},
1497          {187, 113},
1498          {187, 102},
1499          {155, 114},
1500          {155, 103},
1501          {123, 117},
1502          {123, 107},
1503          {123, 99},
1504          {123, 92},
1505          {91, 108},
1506          {59, 125},
1507          {59, 118},
1508          {59, 109},
1509          {59, 102},
1510          {59, 96},
1511          {59, 90},
1512          {27, 104},
1513          {27, 98},
1514          {27, 92},
1515          {115, 118},
1516          {115, 111},
1517          {115, 104},
1518          {83, 126},
1519          {83, 121},
1520          {83, 113},
1521          {83, 105},
1522          {83, 99},
1523          {51, 118},
1524          {51, 111},
1525          {51, 104},
1526          {51, 98},
1527          {19, 116},
1528          {19, 109},
1529          {19, 102},
1530          {19, 98},
1531          {19, 93},
1532          {171, 113},
1533          {171, 107},
1534          {171, 99},
1535          {139, 120},
1536          {139, 113},
1537          {139, 107},
1538          {139, 99},
1539          {107, 120},
1540          {107, 113},
1541          {107, 107},
1542          {107, 99},
1543          {75, 120},
1544          {75, 113},
1545          {75, 107},
1546          {75, 99},
1547          {43, 120},
1548          {43, 113},
1549          {43, 107},
1550          {43, 99},
1551          {11, 120},
1552          {11, 113},
1553          {11, 107},
1554          {11, 99},
1555          {131, 107},
1556          {131, 99},
1557          {99, 120},
1558          {99, 113},
1559          {99, 107},
1560          {99, 99},
1561          {67, 120},
1562          {67, 113},
1563          {67, 107},
1564          {67, 99},
1565          {35, 120},
1566          {35, 113},
1567          {35, 107},
1568          {35, 99},
1569          {3, 120} }             /* 5.x GHz, lowest power */
1570 };
1571
1572 static inline u8 iwl3945_hw_reg_fix_power_index(int index)
1573 {
1574         if (index < 0)
1575                 return 0;
1576         if (index >= IWL_MAX_GAIN_ENTRIES)
1577                 return IWL_MAX_GAIN_ENTRIES - 1;
1578         return (u8) index;
1579 }
1580
1581 /* Kick off thermal recalibration check every 60 seconds */
1582 #define REG_RECALIB_PERIOD (60)
1583
1584 /**
1585  * iwl3945_hw_reg_set_scan_power - Set Tx power for scan probe requests
1586  *
1587  * Set (in our channel info database) the direct scan Tx power for 1 Mbit (CCK)
1588  * or 6 Mbit (OFDM) rates.
1589  */
1590 static void iwl3945_hw_reg_set_scan_power(struct iwl3945_priv *priv, u32 scan_tbl_index,
1591                                s32 rate_index, const s8 *clip_pwrs,
1592                                struct iwl3945_channel_info *ch_info,
1593                                int band_index)
1594 {
1595         struct iwl3945_scan_power_info *scan_power_info;
1596         s8 power;
1597         u8 power_index;
1598
1599         scan_power_info = &ch_info->scan_pwr_info[scan_tbl_index];
1600
1601         /* use this channel group's 6Mbit clipping/saturation pwr,
1602          *   but cap at regulatory scan power restriction (set during init
1603          *   based on eeprom channel data) for this channel.  */
1604         power = min(ch_info->scan_power, clip_pwrs[IWL_RATE_6M_INDEX_TABLE]);
1605
1606         /* further limit to user's max power preference.
1607          * FIXME:  Other spectrum management power limitations do not
1608          *   seem to apply?? */
1609         power = min(power, priv->user_txpower_limit);
1610         scan_power_info->requested_power = power;
1611
1612         /* find difference between new scan *power* and current "normal"
1613          *   Tx *power* for 6Mb.  Use this difference (x2) to adjust the
1614          *   current "normal" temperature-compensated Tx power *index* for
1615          *   this rate (1Mb or 6Mb) to yield new temp-compensated scan power
1616          *   *index*. */
1617         power_index = ch_info->power_info[rate_index].power_table_index
1618             - (power - ch_info->power_info
1619                [IWL_RATE_6M_INDEX_TABLE].requested_power) * 2;
1620
1621         /* store reference index that we use when adjusting *all* scan
1622          *   powers.  So we can accommodate user (all channel) or spectrum
1623          *   management (single channel) power changes "between" temperature
1624          *   feedback compensation procedures.
1625          * don't force fit this reference index into gain table; it may be a
1626          *   negative number.  This will help avoid errors when we're at
1627          *   the lower bounds (highest gains, for warmest temperatures)
1628          *   of the table. */
1629
1630         /* don't exceed table bounds for "real" setting */
1631         power_index = iwl3945_hw_reg_fix_power_index(power_index);
1632
1633         scan_power_info->power_table_index = power_index;
1634         scan_power_info->tpc.tx_gain =
1635             power_gain_table[band_index][power_index].tx_gain;
1636         scan_power_info->tpc.dsp_atten =
1637             power_gain_table[band_index][power_index].dsp_atten;
1638 }
1639
1640 /**
1641  * iwl3945_hw_reg_send_txpower - fill in Tx Power command with gain settings
1642  *
1643  * Configures power settings for all rates for the current channel,
1644  * using values from channel info struct, and send to NIC
1645  */
1646 int iwl3945_hw_reg_send_txpower(struct iwl3945_priv *priv)
1647 {
1648         int rate_idx, i;
1649         const struct iwl3945_channel_info *ch_info = NULL;
1650         struct iwl3945_txpowertable_cmd txpower = {
1651                 .channel = priv->active_rxon.channel,
1652         };
1653
1654         txpower.band = (priv->band == IEEE80211_BAND_5GHZ) ? 0 : 1;
1655         ch_info = iwl3945_get_channel_info(priv,
1656                                        priv->band,
1657                                        le16_to_cpu(priv->active_rxon.channel));
1658         if (!ch_info) {
1659                 IWL_ERROR
1660                     ("Failed to get channel info for channel %d [%d]\n",
1661                      le16_to_cpu(priv->active_rxon.channel), priv->band);
1662                 return -EINVAL;
1663         }
1664
1665         if (!is_channel_valid(ch_info)) {
1666                 IWL_DEBUG_POWER("Not calling TX_PWR_TABLE_CMD on "
1667                                 "non-Tx channel.\n");
1668                 return 0;
1669         }
1670
1671         /* fill cmd with power settings for all rates for current channel */
1672         /* Fill OFDM rate */
1673         for (rate_idx = IWL_FIRST_OFDM_RATE, i = 0;
1674              rate_idx <= IWL_LAST_OFDM_RATE; rate_idx++, i++) {
1675
1676                 txpower.power[i].tpc = ch_info->power_info[i].tpc;
1677                 txpower.power[i].rate = iwl3945_rates[rate_idx].plcp;
1678
1679                 IWL_DEBUG_POWER("ch %d:%d rf %d dsp %3d rate code 0x%02x\n",
1680                                 le16_to_cpu(txpower.channel),
1681                                 txpower.band,
1682                                 txpower.power[i].tpc.tx_gain,
1683                                 txpower.power[i].tpc.dsp_atten,
1684                                 txpower.power[i].rate);
1685         }
1686         /* Fill CCK rates */
1687         for (rate_idx = IWL_FIRST_CCK_RATE;
1688              rate_idx <= IWL_LAST_CCK_RATE; rate_idx++, i++) {
1689                 txpower.power[i].tpc = ch_info->power_info[i].tpc;
1690                 txpower.power[i].rate = iwl3945_rates[rate_idx].plcp;
1691
1692                 IWL_DEBUG_POWER("ch %d:%d rf %d dsp %3d rate code 0x%02x\n",
1693                                 le16_to_cpu(txpower.channel),
1694                                 txpower.band,
1695                                 txpower.power[i].tpc.tx_gain,
1696                                 txpower.power[i].tpc.dsp_atten,
1697                                 txpower.power[i].rate);
1698         }
1699
1700         return iwl3945_send_cmd_pdu(priv, REPLY_TX_PWR_TABLE_CMD,
1701                         sizeof(struct iwl3945_txpowertable_cmd), &txpower);
1702
1703 }
1704
1705 /**
1706  * iwl3945_hw_reg_set_new_power - Configures power tables at new levels
1707  * @ch_info: Channel to update.  Uses power_info.requested_power.
1708  *
1709  * Replace requested_power and base_power_index ch_info fields for
1710  * one channel.
1711  *
1712  * Called if user or spectrum management changes power preferences.
1713  * Takes into account h/w and modulation limitations (clip power).
1714  *
1715  * This does *not* send anything to NIC, just sets up ch_info for one channel.
1716  *
1717  * NOTE: reg_compensate_for_temperature_dif() *must* be run after this to
1718  *       properly fill out the scan powers, and actual h/w gain settings,
1719  *       and send changes to NIC
1720  */
1721 static int iwl3945_hw_reg_set_new_power(struct iwl3945_priv *priv,
1722                              struct iwl3945_channel_info *ch_info)
1723 {
1724         struct iwl3945_channel_power_info *power_info;
1725         int power_changed = 0;
1726         int i;
1727         const s8 *clip_pwrs;
1728         int power;
1729
1730         /* Get this chnlgrp's rate-to-max/clip-powers table */
1731         clip_pwrs = priv->clip_groups[ch_info->group_index].clip_powers;
1732
1733         /* Get this channel's rate-to-current-power settings table */
1734         power_info = ch_info->power_info;
1735
1736         /* update OFDM Txpower settings */
1737         for (i = IWL_RATE_6M_INDEX_TABLE; i <= IWL_RATE_54M_INDEX_TABLE;
1738              i++, ++power_info) {
1739                 int delta_idx;
1740
1741                 /* limit new power to be no more than h/w capability */
1742                 power = min(ch_info->curr_txpow, clip_pwrs[i]);
1743                 if (power == power_info->requested_power)
1744                         continue;
1745
1746                 /* find difference between old and new requested powers,
1747                  *    update base (non-temp-compensated) power index */
1748                 delta_idx = (power - power_info->requested_power) * 2;
1749                 power_info->base_power_index -= delta_idx;
1750
1751                 /* save new requested power value */
1752                 power_info->requested_power = power;
1753
1754                 power_changed = 1;
1755         }
1756
1757         /* update CCK Txpower settings, based on OFDM 12M setting ...
1758          *    ... all CCK power settings for a given channel are the *same*. */
1759         if (power_changed) {
1760                 power =
1761                     ch_info->power_info[IWL_RATE_12M_INDEX_TABLE].
1762                     requested_power + IWL_CCK_FROM_OFDM_POWER_DIFF;
1763
1764                 /* do all CCK rates' iwl3945_channel_power_info structures */
1765                 for (i = IWL_RATE_1M_INDEX_TABLE; i <= IWL_RATE_11M_INDEX_TABLE; i++) {
1766                         power_info->requested_power = power;
1767                         power_info->base_power_index =
1768                             ch_info->power_info[IWL_RATE_12M_INDEX_TABLE].
1769                             base_power_index + IWL_CCK_FROM_OFDM_INDEX_DIFF;
1770                         ++power_info;
1771                 }
1772         }
1773
1774         return 0;
1775 }
1776
1777 /**
1778  * iwl3945_hw_reg_get_ch_txpower_limit - returns new power limit for channel
1779  *
1780  * NOTE: Returned power limit may be less (but not more) than requested,
1781  *       based strictly on regulatory (eeprom and spectrum mgt) limitations
1782  *       (no consideration for h/w clipping limitations).
1783  */
1784 static int iwl3945_hw_reg_get_ch_txpower_limit(struct iwl3945_channel_info *ch_info)
1785 {
1786         s8 max_power;
1787
1788 #if 0
1789         /* if we're using TGd limits, use lower of TGd or EEPROM */
1790         if (ch_info->tgd_data.max_power != 0)
1791                 max_power = min(ch_info->tgd_data.max_power,
1792                                 ch_info->eeprom.max_power_avg);
1793
1794         /* else just use EEPROM limits */
1795         else
1796 #endif
1797                 max_power = ch_info->eeprom.max_power_avg;
1798
1799         return min(max_power, ch_info->max_power_avg);
1800 }
1801
1802 /**
1803  * iwl3945_hw_reg_comp_txpower_temp - Compensate for temperature
1804  *
1805  * Compensate txpower settings of *all* channels for temperature.
1806  * This only accounts for the difference between current temperature
1807  *   and the factory calibration temperatures, and bases the new settings
1808  *   on the channel's base_power_index.
1809  *
1810  * If RxOn is "associated", this sends the new Txpower to NIC!
1811  */
1812 static int iwl3945_hw_reg_comp_txpower_temp(struct iwl3945_priv *priv)
1813 {
1814         struct iwl3945_channel_info *ch_info = NULL;
1815         int delta_index;
1816         const s8 *clip_pwrs; /* array of h/w max power levels for each rate */
1817         u8 a_band;
1818         u8 rate_index;
1819         u8 scan_tbl_index;
1820         u8 i;
1821         int ref_temp;
1822         int temperature = priv->temperature;
1823
1824         /* set up new Tx power info for each and every channel, 2.4 and 5.x */
1825         for (i = 0; i < priv->channel_count; i++) {
1826                 ch_info = &priv->channel_info[i];
1827                 a_band = is_channel_a_band(ch_info);
1828
1829                 /* Get this chnlgrp's factory calibration temperature */
1830                 ref_temp = (s16)priv->eeprom.groups[ch_info->group_index].
1831                     temperature;
1832
1833                 /* get power index adjustment based on curr and factory
1834                  * temps */
1835                 delta_index = iwl3945_hw_reg_adjust_power_by_temp(temperature,
1836                                                               ref_temp);
1837
1838                 /* set tx power value for all rates, OFDM and CCK */
1839                 for (rate_index = 0; rate_index < IWL_RATE_COUNT;
1840                      rate_index++) {
1841                         int power_idx =
1842                             ch_info->power_info[rate_index].base_power_index;
1843
1844                         /* temperature compensate */
1845                         power_idx += delta_index;
1846
1847                         /* stay within table range */
1848                         power_idx = iwl3945_hw_reg_fix_power_index(power_idx);
1849                         ch_info->power_info[rate_index].
1850                             power_table_index = (u8) power_idx;
1851                         ch_info->power_info[rate_index].tpc =
1852                             power_gain_table[a_band][power_idx];
1853                 }
1854
1855                 /* Get this chnlgrp's rate-to-max/clip-powers table */
1856                 clip_pwrs = priv->clip_groups[ch_info->group_index].clip_powers;
1857
1858                 /* set scan tx power, 1Mbit for CCK, 6Mbit for OFDM */
1859                 for (scan_tbl_index = 0;
1860                      scan_tbl_index < IWL_NUM_SCAN_RATES; scan_tbl_index++) {
1861                         s32 actual_index = (scan_tbl_index == 0) ?
1862                             IWL_RATE_1M_INDEX_TABLE : IWL_RATE_6M_INDEX_TABLE;
1863                         iwl3945_hw_reg_set_scan_power(priv, scan_tbl_index,
1864                                            actual_index, clip_pwrs,
1865                                            ch_info, a_band);
1866                 }
1867         }
1868
1869         /* send Txpower command for current channel to ucode */
1870         return iwl3945_hw_reg_send_txpower(priv);
1871 }
1872
1873 int iwl3945_hw_reg_set_txpower(struct iwl3945_priv *priv, s8 power)
1874 {
1875         struct iwl3945_channel_info *ch_info;
1876         s8 max_power;
1877         u8 a_band;
1878         u8 i;
1879
1880         if (priv->user_txpower_limit == power) {
1881                 IWL_DEBUG_POWER("Requested Tx power same as current "
1882                                 "limit: %ddBm.\n", power);
1883                 return 0;
1884         }
1885
1886         IWL_DEBUG_POWER("Setting upper limit clamp to %ddBm.\n", power);
1887         priv->user_txpower_limit = power;
1888
1889         /* set up new Tx powers for each and every channel, 2.4 and 5.x */
1890
1891         for (i = 0; i < priv->channel_count; i++) {
1892                 ch_info = &priv->channel_info[i];
1893                 a_band = is_channel_a_band(ch_info);
1894
1895                 /* find minimum power of all user and regulatory constraints
1896                  *    (does not consider h/w clipping limitations) */
1897                 max_power = iwl3945_hw_reg_get_ch_txpower_limit(ch_info);
1898                 max_power = min(power, max_power);
1899                 if (max_power != ch_info->curr_txpow) {
1900                         ch_info->curr_txpow = max_power;
1901
1902                         /* this considers the h/w clipping limitations */
1903                         iwl3945_hw_reg_set_new_power(priv, ch_info);
1904                 }
1905         }
1906
1907         /* update txpower settings for all channels,
1908          *   send to NIC if associated. */
1909         is_temp_calib_needed(priv);
1910         iwl3945_hw_reg_comp_txpower_temp(priv);
1911
1912         return 0;
1913 }
1914
1915 /* will add 3945 channel switch cmd handling later */
1916 int iwl3945_hw_channel_switch(struct iwl3945_priv *priv, u16 channel)
1917 {
1918         return 0;
1919 }
1920
1921 /**
1922  * iwl3945_reg_txpower_periodic -  called when time to check our temperature.
1923  *
1924  * -- reset periodic timer
1925  * -- see if temp has changed enough to warrant re-calibration ... if so:
1926  *     -- correct coeffs for temp (can reset temp timer)
1927  *     -- save this temp as "last",
1928  *     -- send new set of gain settings to NIC
1929  * NOTE:  This should continue working, even when we're not associated,
1930  *   so we can keep our internal table of scan powers current. */
1931 void iwl3945_reg_txpower_periodic(struct iwl3945_priv *priv)
1932 {
1933         /* This will kick in the "brute force"
1934          * iwl3945_hw_reg_comp_txpower_temp() below */
1935         if (!is_temp_calib_needed(priv))
1936                 goto reschedule;
1937
1938         /* Set up a new set of temp-adjusted TxPowers, send to NIC.
1939          * This is based *only* on current temperature,
1940          * ignoring any previous power measurements */
1941         iwl3945_hw_reg_comp_txpower_temp(priv);
1942
1943  reschedule:
1944         queue_delayed_work(priv->workqueue,
1945                            &priv->thermal_periodic, REG_RECALIB_PERIOD * HZ);
1946 }
1947
1948 static void iwl3945_bg_reg_txpower_periodic(struct work_struct *work)
1949 {
1950         struct iwl3945_priv *priv = container_of(work, struct iwl3945_priv,
1951                                              thermal_periodic.work);
1952
1953         if (test_bit(STATUS_EXIT_PENDING, &priv->status))
1954                 return;
1955
1956         mutex_lock(&priv->mutex);
1957         iwl3945_reg_txpower_periodic(priv);
1958         mutex_unlock(&priv->mutex);
1959 }
1960
1961 /**
1962  * iwl3945_hw_reg_get_ch_grp_index - find the channel-group index (0-4)
1963  *                                 for the channel.
1964  *
1965  * This function is used when initializing channel-info structs.
1966  *
1967  * NOTE: These channel groups do *NOT* match the bands above!
1968  *       These channel groups are based on factory-tested channels;
1969  *       on A-band, EEPROM's "group frequency" entries represent the top
1970  *       channel in each group 1-4.  Group 5 All B/G channels are in group 0.
1971  */
1972 static u16 iwl3945_hw_reg_get_ch_grp_index(struct iwl3945_priv *priv,
1973                                        const struct iwl3945_channel_info *ch_info)
1974 {
1975         struct iwl3945_eeprom_txpower_group *ch_grp = &priv->eeprom.groups[0];
1976         u8 group;
1977         u16 group_index = 0;    /* based on factory calib frequencies */
1978         u8 grp_channel;
1979
1980         /* Find the group index for the channel ... don't use index 1(?) */
1981         if (is_channel_a_band(ch_info)) {
1982                 for (group = 1; group < 5; group++) {
1983                         grp_channel = ch_grp[group].group_channel;
1984                         if (ch_info->channel <= grp_channel) {
1985                                 group_index = group;
1986                                 break;
1987                         }
1988                 }
1989                 /* group 4 has a few channels *above* its factory cal freq */
1990                 if (group == 5)
1991                         group_index = 4;
1992         } else
1993                 group_index = 0;        /* 2.4 GHz, group 0 */
1994
1995         IWL_DEBUG_POWER("Chnl %d mapped to grp %d\n", ch_info->channel,
1996                         group_index);
1997         return group_index;
1998 }
1999
2000 /**
2001  * iwl3945_hw_reg_get_matched_power_index - Interpolate to get nominal index
2002  *
2003  * Interpolate to get nominal (i.e. at factory calibration temperature) index
2004  *   into radio/DSP gain settings table for requested power.
2005  */
2006 static int iwl3945_hw_reg_get_matched_power_index(struct iwl3945_priv *priv,
2007                                        s8 requested_power,
2008                                        s32 setting_index, s32 *new_index)
2009 {
2010         const struct iwl3945_eeprom_txpower_group *chnl_grp = NULL;
2011         s32 index0, index1;
2012         s32 power = 2 * requested_power;
2013         s32 i;
2014         const struct iwl3945_eeprom_txpower_sample *samples;
2015         s32 gains0, gains1;
2016         s32 res;
2017         s32 denominator;
2018
2019         chnl_grp = &priv->eeprom.groups[setting_index];
2020         samples = chnl_grp->samples;
2021         for (i = 0; i < 5; i++) {
2022                 if (power == samples[i].power) {
2023                         *new_index = samples[i].gain_index;
2024                         return 0;
2025                 }
2026         }
2027
2028         if (power > samples[1].power) {
2029                 index0 = 0;
2030                 index1 = 1;
2031         } else if (power > samples[2].power) {
2032                 index0 = 1;
2033                 index1 = 2;
2034         } else if (power > samples[3].power) {
2035                 index0 = 2;
2036                 index1 = 3;
2037         } else {
2038                 index0 = 3;
2039                 index1 = 4;
2040         }
2041
2042         denominator = (s32) samples[index1].power - (s32) samples[index0].power;
2043         if (denominator == 0)
2044                 return -EINVAL;
2045         gains0 = (s32) samples[index0].gain_index * (1 << 19);
2046         gains1 = (s32) samples[index1].gain_index * (1 << 19);
2047         res = gains0 + (gains1 - gains0) *
2048             ((s32) power - (s32) samples[index0].power) / denominator +
2049             (1 << 18);
2050         *new_index = res >> 19;
2051         return 0;
2052 }
2053
2054 static void iwl3945_hw_reg_init_channel_groups(struct iwl3945_priv *priv)
2055 {
2056         u32 i;
2057         s32 rate_index;
2058         const struct iwl3945_eeprom_txpower_group *group;
2059
2060         IWL_DEBUG_POWER("Initializing factory calib info from EEPROM\n");
2061
2062         for (i = 0; i < IWL_NUM_TX_CALIB_GROUPS; i++) {
2063                 s8 *clip_pwrs;  /* table of power levels for each rate */
2064                 s8 satur_pwr;   /* saturation power for each chnl group */
2065                 group = &priv->eeprom.groups[i];
2066
2067                 /* sanity check on factory saturation power value */
2068                 if (group->saturation_power < 40) {
2069                         IWL_WARNING("Error: saturation power is %d, "
2070                                     "less than minimum expected 40\n",
2071                                     group->saturation_power);
2072                         return;
2073                 }
2074
2075                 /*
2076                  * Derive requested power levels for each rate, based on
2077                  *   hardware capabilities (saturation power for band).
2078                  * Basic value is 3dB down from saturation, with further
2079                  *   power reductions for highest 3 data rates.  These
2080                  *   backoffs provide headroom for high rate modulation
2081                  *   power peaks, without too much distortion (clipping).
2082                  */
2083                 /* we'll fill in this array with h/w max power levels */
2084                 clip_pwrs = (s8 *) priv->clip_groups[i].clip_powers;
2085
2086                 /* divide factory saturation power by 2 to find -3dB level */
2087                 satur_pwr = (s8) (group->saturation_power >> 1);
2088
2089                 /* fill in channel group's nominal powers for each rate */
2090                 for (rate_index = 0;
2091                      rate_index < IWL_RATE_COUNT; rate_index++, clip_pwrs++) {
2092                         switch (rate_index) {
2093                         case IWL_RATE_36M_INDEX_TABLE:
2094                                 if (i == 0)     /* B/G */
2095                                         *clip_pwrs = satur_pwr;
2096                                 else    /* A */
2097                                         *clip_pwrs = satur_pwr - 5;
2098                                 break;
2099                         case IWL_RATE_48M_INDEX_TABLE:
2100                                 if (i == 0)
2101                                         *clip_pwrs = satur_pwr - 7;
2102                                 else
2103                                         *clip_pwrs = satur_pwr - 10;
2104                                 break;
2105                         case IWL_RATE_54M_INDEX_TABLE:
2106                                 if (i == 0)
2107                                         *clip_pwrs = satur_pwr - 9;
2108                                 else
2109                                         *clip_pwrs = satur_pwr - 12;
2110                                 break;
2111                         default:
2112                                 *clip_pwrs = satur_pwr;
2113                                 break;
2114                         }
2115                 }
2116         }
2117 }
2118
2119 /**
2120  * iwl3945_txpower_set_from_eeprom - Set channel power info based on EEPROM
2121  *
2122  * Second pass (during init) to set up priv->channel_info
2123  *
2124  * Set up Tx-power settings in our channel info database for each VALID
2125  * (for this geo/SKU) channel, at all Tx data rates, based on eeprom values
2126  * and current temperature.
2127  *
2128  * Since this is based on current temperature (at init time), these values may
2129  * not be valid for very long, but it gives us a starting/default point,
2130  * and allows us to active (i.e. using Tx) scan.
2131  *
2132  * This does *not* write values to NIC, just sets up our internal table.
2133  */
2134 int iwl3945_txpower_set_from_eeprom(struct iwl3945_priv *priv)
2135 {
2136         struct iwl3945_channel_info *ch_info = NULL;
2137         struct iwl3945_channel_power_info *pwr_info;
2138         int delta_index;
2139         u8 rate_index;
2140         u8 scan_tbl_index;
2141         const s8 *clip_pwrs;    /* array of power levels for each rate */
2142         u8 gain, dsp_atten;
2143         s8 power;
2144         u8 pwr_index, base_pwr_index, a_band;
2145         u8 i;
2146         int temperature;
2147
2148         /* save temperature reference,
2149          *   so we can determine next time to calibrate */
2150         temperature = iwl3945_hw_reg_txpower_get_temperature(priv);
2151         priv->last_temperature = temperature;
2152
2153         iwl3945_hw_reg_init_channel_groups(priv);
2154
2155         /* initialize Tx power info for each and every channel, 2.4 and 5.x */
2156         for (i = 0, ch_info = priv->channel_info; i < priv->channel_count;
2157              i++, ch_info++) {
2158                 a_band = is_channel_a_band(ch_info);
2159                 if (!is_channel_valid(ch_info))
2160                         continue;
2161
2162                 /* find this channel's channel group (*not* "band") index */
2163                 ch_info->group_index =
2164                         iwl3945_hw_reg_get_ch_grp_index(priv, ch_info);
2165
2166                 /* Get this chnlgrp's rate->max/clip-powers table */
2167                 clip_pwrs = priv->clip_groups[ch_info->group_index].clip_powers;
2168
2169                 /* calculate power index *adjustment* value according to
2170                  *  diff between current temperature and factory temperature */
2171                 delta_index = iwl3945_hw_reg_adjust_power_by_temp(temperature,
2172                                 priv->eeprom.groups[ch_info->group_index].
2173                                 temperature);
2174
2175                 IWL_DEBUG_POWER("Delta index for channel %d: %d [%d]\n",
2176                                 ch_info->channel, delta_index, temperature +
2177                                 IWL_TEMP_CONVERT);
2178
2179                 /* set tx power value for all OFDM rates */
2180                 for (rate_index = 0; rate_index < IWL_OFDM_RATES;
2181                      rate_index++) {
2182                         s32 power_idx;
2183                         int rc;
2184
2185                         /* use channel group's clip-power table,
2186                          *   but don't exceed channel's max power */
2187                         s8 pwr = min(ch_info->max_power_avg,
2188                                      clip_pwrs[rate_index]);
2189
2190                         pwr_info = &ch_info->power_info[rate_index];
2191
2192                         /* get base (i.e. at factory-measured temperature)
2193                          *    power table index for this rate's power */
2194                         rc = iwl3945_hw_reg_get_matched_power_index(priv, pwr,
2195                                                          ch_info->group_index,
2196                                                          &power_idx);
2197                         if (rc) {
2198                                 IWL_ERROR("Invalid power index\n");
2199                                 return rc;
2200                         }
2201                         pwr_info->base_power_index = (u8) power_idx;
2202
2203                         /* temperature compensate */
2204                         power_idx += delta_index;
2205
2206                         /* stay within range of gain table */
2207                         power_idx = iwl3945_hw_reg_fix_power_index(power_idx);
2208
2209                         /* fill 1 OFDM rate's iwl3945_channel_power_info struct */
2210                         pwr_info->requested_power = pwr;
2211                         pwr_info->power_table_index = (u8) power_idx;
2212                         pwr_info->tpc.tx_gain =
2213                             power_gain_table[a_band][power_idx].tx_gain;
2214                         pwr_info->tpc.dsp_atten =
2215                             power_gain_table[a_band][power_idx].dsp_atten;
2216                 }
2217
2218                 /* set tx power for CCK rates, based on OFDM 12 Mbit settings*/
2219                 pwr_info = &ch_info->power_info[IWL_RATE_12M_INDEX_TABLE];
2220                 power = pwr_info->requested_power +
2221                         IWL_CCK_FROM_OFDM_POWER_DIFF;
2222                 pwr_index = pwr_info->power_table_index +
2223                         IWL_CCK_FROM_OFDM_INDEX_DIFF;
2224                 base_pwr_index = pwr_info->base_power_index +
2225                         IWL_CCK_FROM_OFDM_INDEX_DIFF;
2226
2227                 /* stay within table range */
2228                 pwr_index = iwl3945_hw_reg_fix_power_index(pwr_index);
2229                 gain = power_gain_table[a_band][pwr_index].tx_gain;
2230                 dsp_atten = power_gain_table[a_band][pwr_index].dsp_atten;
2231
2232                 /* fill each CCK rate's iwl3945_channel_power_info structure
2233                  * NOTE:  All CCK-rate Txpwrs are the same for a given chnl!
2234                  * NOTE:  CCK rates start at end of OFDM rates! */
2235                 for (rate_index = 0;
2236                      rate_index < IWL_CCK_RATES; rate_index++) {
2237                         pwr_info = &ch_info->power_info[rate_index+IWL_OFDM_RATES];
2238                         pwr_info->requested_power = power;
2239                         pwr_info->power_table_index = pwr_index;
2240                         pwr_info->base_power_index = base_pwr_index;
2241                         pwr_info->tpc.tx_gain = gain;
2242                         pwr_info->tpc.dsp_atten = dsp_atten;
2243                 }
2244
2245                 /* set scan tx power, 1Mbit for CCK, 6Mbit for OFDM */
2246                 for (scan_tbl_index = 0;
2247                      scan_tbl_index < IWL_NUM_SCAN_RATES; scan_tbl_index++) {
2248                         s32 actual_index = (scan_tbl_index == 0) ?
2249                                 IWL_RATE_1M_INDEX_TABLE : IWL_RATE_6M_INDEX_TABLE;
2250                         iwl3945_hw_reg_set_scan_power(priv, scan_tbl_index,
2251                                 actual_index, clip_pwrs, ch_info, a_band);
2252                 }
2253         }
2254
2255         return 0;
2256 }
2257
2258 int iwl3945_hw_rxq_stop(struct iwl3945_priv *priv)
2259 {
2260         int rc;
2261         unsigned long flags;
2262
2263         spin_lock_irqsave(&priv->lock, flags);
2264         rc = iwl3945_grab_nic_access(priv);
2265         if (rc) {
2266                 spin_unlock_irqrestore(&priv->lock, flags);
2267                 return rc;
2268         }
2269
2270         iwl3945_write_direct32(priv, FH_RCSR_CONFIG(0), 0);
2271         rc = iwl3945_poll_direct_bit(priv, FH_RSSR_STATUS, (1 << 24), 1000);
2272         if (rc < 0)
2273                 IWL_ERROR("Can't stop Rx DMA.\n");
2274
2275         iwl3945_release_nic_access(priv);
2276         spin_unlock_irqrestore(&priv->lock, flags);
2277
2278         return 0;
2279 }
2280
2281 int iwl3945_hw_tx_queue_init(struct iwl3945_priv *priv, struct iwl3945_tx_queue *txq)
2282 {
2283         int rc;
2284         unsigned long flags;
2285         int txq_id = txq->q.id;
2286
2287         struct iwl3945_shared *shared_data = priv->hw_setting.shared_virt;
2288
2289         shared_data->tx_base_ptr[txq_id] = cpu_to_le32((u32)txq->q.dma_addr);
2290
2291         spin_lock_irqsave(&priv->lock, flags);
2292         rc = iwl3945_grab_nic_access(priv);
2293         if (rc) {
2294                 spin_unlock_irqrestore(&priv->lock, flags);
2295                 return rc;
2296         }
2297         iwl3945_write_direct32(priv, FH_CBCC_CTRL(txq_id), 0);
2298         iwl3945_write_direct32(priv, FH_CBCC_BASE(txq_id), 0);
2299
2300         iwl3945_write_direct32(priv, FH_TCSR_CONFIG(txq_id),
2301                 ALM_FH_TCSR_TX_CONFIG_REG_VAL_CIRQ_RTC_NOINT |
2302                 ALM_FH_TCSR_TX_CONFIG_REG_VAL_MSG_MODE_TXF |
2303                 ALM_FH_TCSR_TX_CONFIG_REG_VAL_CIRQ_HOST_IFTFD |
2304                 ALM_FH_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE_VAL |
2305                 ALM_FH_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE);
2306         iwl3945_release_nic_access(priv);
2307
2308         /* fake read to flush all prev. writes */
2309         iwl3945_read32(priv, FH_TSSR_CBB_BASE);
2310         spin_unlock_irqrestore(&priv->lock, flags);
2311
2312         return 0;
2313 }
2314
2315 int iwl3945_hw_get_rx_read(struct iwl3945_priv *priv)
2316 {
2317         struct iwl3945_shared *shared_data = priv->hw_setting.shared_virt;
2318
2319         return le32_to_cpu(shared_data->rx_read_ptr[0]);
2320 }
2321
2322 /**
2323  * iwl3945_init_hw_rate_table - Initialize the hardware rate fallback table
2324  */
2325 int iwl3945_init_hw_rate_table(struct iwl3945_priv *priv)
2326 {
2327         int rc, i, index, prev_index;
2328         struct iwl3945_rate_scaling_cmd rate_cmd = {
2329                 .reserved = {0, 0, 0},
2330         };
2331         struct iwl3945_rate_scaling_info *table = rate_cmd.table;
2332
2333         for (i = 0; i < ARRAY_SIZE(iwl3945_rates); i++) {
2334                 index = iwl3945_rates[i].table_rs_index;
2335
2336                 table[index].rate_n_flags =
2337                         iwl3945_hw_set_rate_n_flags(iwl3945_rates[i].plcp, 0);
2338                 table[index].try_cnt = priv->retry_rate;
2339                 prev_index = iwl3945_get_prev_ieee_rate(i);
2340                 table[index].next_rate_index = iwl3945_rates[prev_index].table_rs_index;
2341         }
2342
2343         switch (priv->band) {
2344         case IEEE80211_BAND_5GHZ:
2345                 IWL_DEBUG_RATE("Select A mode rate scale\n");
2346                 /* If one of the following CCK rates is used,
2347                  * have it fall back to the 6M OFDM rate */
2348                 for (i = IWL_RATE_1M_INDEX_TABLE; i <= IWL_RATE_11M_INDEX_TABLE; i++)
2349                         table[i].next_rate_index = iwl3945_rates[IWL_FIRST_OFDM_RATE].table_rs_index;
2350
2351                 /* Don't fall back to CCK rates */
2352                 table[IWL_RATE_12M_INDEX_TABLE].next_rate_index = IWL_RATE_9M_INDEX_TABLE;
2353
2354                 /* Don't drop out of OFDM rates */
2355                 table[IWL_RATE_6M_INDEX_TABLE].next_rate_index =
2356                     iwl3945_rates[IWL_FIRST_OFDM_RATE].table_rs_index;
2357                 break;
2358
2359         case IEEE80211_BAND_2GHZ:
2360                 IWL_DEBUG_RATE("Select B/G mode rate scale\n");
2361                 /* If an OFDM rate is used, have it fall back to the
2362                  * 1M CCK rates */
2363                 for (i = IWL_RATE_6M_INDEX_TABLE; i <= IWL_RATE_54M_INDEX_TABLE; i++)
2364                         table[i].next_rate_index = iwl3945_rates[IWL_FIRST_CCK_RATE].table_rs_index;
2365
2366                 /* CCK shouldn't fall back to OFDM... */
2367                 table[IWL_RATE_11M_INDEX_TABLE].next_rate_index = IWL_RATE_5M_INDEX_TABLE;
2368                 break;
2369
2370         default:
2371                 WARN_ON(1);
2372                 break;
2373         }
2374
2375         /* Update the rate scaling for control frame Tx */
2376         rate_cmd.table_id = 0;
2377         rc = iwl3945_send_cmd_pdu(priv, REPLY_RATE_SCALE, sizeof(rate_cmd),
2378                               &rate_cmd);
2379         if (rc)
2380                 return rc;
2381
2382         /* Update the rate scaling for data frame Tx */
2383         rate_cmd.table_id = 1;
2384         return iwl3945_send_cmd_pdu(priv, REPLY_RATE_SCALE, sizeof(rate_cmd),
2385                                 &rate_cmd);
2386 }
2387
2388 /* Called when initializing driver */
2389 int iwl3945_hw_set_hw_setting(struct iwl3945_priv *priv)
2390 {
2391         memset((void *)&priv->hw_setting, 0,
2392                sizeof(struct iwl3945_driver_hw_info));
2393
2394         priv->hw_setting.shared_virt =
2395             pci_alloc_consistent(priv->pci_dev,
2396                                  sizeof(struct iwl3945_shared),
2397                                  &priv->hw_setting.shared_phys);
2398
2399         if (!priv->hw_setting.shared_virt) {
2400                 IWL_ERROR("failed to allocate pci memory\n");
2401                 mutex_unlock(&priv->mutex);
2402                 return -ENOMEM;
2403         }
2404
2405         priv->hw_setting.rx_buf_size = IWL_RX_BUF_SIZE;
2406         priv->hw_setting.max_pkt_size = 2342;
2407         priv->hw_setting.tx_cmd_len = sizeof(struct iwl3945_tx_cmd);
2408         priv->hw_setting.max_rxq_size = RX_QUEUE_SIZE;
2409         priv->hw_setting.max_rxq_log = RX_QUEUE_SIZE_LOG;
2410         priv->hw_setting.max_stations = IWL3945_STATION_COUNT;
2411         priv->hw_setting.bcast_sta_id = IWL3945_BROADCAST_ID;
2412
2413         priv->hw_setting.tx_ant_num = 2;
2414         return 0;
2415 }
2416
2417 unsigned int iwl3945_hw_get_beacon_cmd(struct iwl3945_priv *priv,
2418                           struct iwl3945_frame *frame, u8 rate)
2419 {
2420         struct iwl3945_tx_beacon_cmd *tx_beacon_cmd;
2421         unsigned int frame_size;
2422
2423         tx_beacon_cmd = (struct iwl3945_tx_beacon_cmd *)&frame->u;
2424         memset(tx_beacon_cmd, 0, sizeof(*tx_beacon_cmd));
2425
2426         tx_beacon_cmd->tx.sta_id = priv->hw_setting.bcast_sta_id;
2427         tx_beacon_cmd->tx.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
2428
2429         frame_size = iwl3945_fill_beacon_frame(priv,
2430                                 tx_beacon_cmd->frame,
2431                                 iwl3945_broadcast_addr,
2432                                 sizeof(frame->u) - sizeof(*tx_beacon_cmd));
2433
2434         BUG_ON(frame_size > MAX_MPDU_SIZE);
2435         tx_beacon_cmd->tx.len = cpu_to_le16((u16)frame_size);
2436
2437         tx_beacon_cmd->tx.rate = rate;
2438         tx_beacon_cmd->tx.tx_flags = (TX_CMD_FLG_SEQ_CTL_MSK |
2439                                       TX_CMD_FLG_TSF_MSK);
2440
2441         /* supp_rates[0] == OFDM start at IWL_FIRST_OFDM_RATE*/
2442         tx_beacon_cmd->tx.supp_rates[0] =
2443                 (IWL_OFDM_BASIC_RATES_MASK >> IWL_FIRST_OFDM_RATE) & 0xFF;
2444
2445         tx_beacon_cmd->tx.supp_rates[1] =
2446                 (IWL_CCK_BASIC_RATES_MASK & 0xF);
2447
2448         return sizeof(struct iwl3945_tx_beacon_cmd) + frame_size;
2449 }
2450
2451 void iwl3945_hw_rx_handler_setup(struct iwl3945_priv *priv)
2452 {
2453         priv->rx_handlers[REPLY_TX] = iwl3945_rx_reply_tx;
2454         priv->rx_handlers[REPLY_3945_RX] = iwl3945_rx_reply_rx;
2455 }
2456
2457 void iwl3945_hw_setup_deferred_work(struct iwl3945_priv *priv)
2458 {
2459         INIT_DELAYED_WORK(&priv->thermal_periodic,
2460                           iwl3945_bg_reg_txpower_periodic);
2461 }
2462
2463 void iwl3945_hw_cancel_deferred_work(struct iwl3945_priv *priv)
2464 {
2465         cancel_delayed_work(&priv->thermal_periodic);
2466 }
2467
2468 static struct iwl_3945_cfg iwl3945_bg_cfg = {
2469         .name = "3945BG",
2470         .fw_name = "iwlwifi-3945" IWL3945_UCODE_API ".ucode",
2471         .sku = IWL_SKU_G,
2472 };
2473
2474 static struct iwl_3945_cfg iwl3945_abg_cfg = {
2475         .name = "3945ABG",
2476         .fw_name = "iwlwifi-3945" IWL3945_UCODE_API ".ucode",
2477         .sku = IWL_SKU_A|IWL_SKU_G,
2478 };
2479
2480 struct pci_device_id iwl3945_hw_card_ids[] = {
2481         {IWL_PCI_DEVICE(0x4222, 0x1005, iwl3945_bg_cfg)},
2482         {IWL_PCI_DEVICE(0x4222, 0x1034, iwl3945_bg_cfg)},
2483         {IWL_PCI_DEVICE(0x4222, 0x1044, iwl3945_bg_cfg)},
2484         {IWL_PCI_DEVICE(0x4227, 0x1014, iwl3945_bg_cfg)},
2485         {IWL_PCI_DEVICE(0x4222, PCI_ANY_ID, iwl3945_abg_cfg)},
2486         {IWL_PCI_DEVICE(0x4227, PCI_ANY_ID, iwl3945_abg_cfg)},
2487         {0}
2488 };
2489
2490 MODULE_DEVICE_TABLE(pci, iwl3945_hw_card_ids);