]> www.pilppa.org Git - linux-2.6-omap-h63xx.git/blob - drivers/net/wireless/ath5k/ath5k.h
[CIFS] list entry can not return null
[linux-2.6-omap-h63xx.git] / drivers / net / wireless / ath5k / ath5k.h
1 /*
2  * Copyright (c) 2004-2007 Reyk Floeter <reyk@openbsd.org>
3  * Copyright (c) 2006-2007 Nick Kossifidis <mickflemm@gmail.com>
4  *
5  * Permission to use, copy, modify, and distribute this software for any
6  * purpose with or without fee is hereby granted, provided that the above
7  * copyright notice and this permission notice appear in all copies.
8  *
9  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
10  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
11  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
12  * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
13  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
14  * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
15  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
16  */
17
18 #ifndef _ATH5K_H
19 #define _ATH5K_H
20
21 /* Set this to 1 to disable regulatory domain restrictions for channel tests.
22  * WARNING: This is for debuging only and has side effects (eg. scan takes too
23  * long and results timeouts). It's also illegal to tune to some of the
24  * supported frequencies in some countries, so use this at your own risk,
25  * you've been warned. */
26 #define CHAN_DEBUG      0
27
28 #include <linux/io.h>
29 #include <linux/types.h>
30 #include <net/mac80211.h>
31
32 #include "hw.h"
33
34 /* PCI IDs */
35 #define PCI_DEVICE_ID_ATHEROS_AR5210            0x0007 /* AR5210 */
36 #define PCI_DEVICE_ID_ATHEROS_AR5311            0x0011 /* AR5311 */
37 #define PCI_DEVICE_ID_ATHEROS_AR5211            0x0012 /* AR5211 */
38 #define PCI_DEVICE_ID_ATHEROS_AR5212            0x0013 /* AR5212 */
39 #define PCI_DEVICE_ID_3COM_3CRDAG675            0x0013 /* 3CRDAG675 (Atheros AR5212) */
40 #define PCI_DEVICE_ID_3COM_2_3CRPAG175          0x0013 /* 3CRPAG175 (Atheros AR5212) */
41 #define PCI_DEVICE_ID_ATHEROS_AR5210_AP         0x0207 /* AR5210 (Early) */
42 #define PCI_DEVICE_ID_ATHEROS_AR5212_IBM        0x1014 /* AR5212 (IBM MiniPCI) */
43 #define PCI_DEVICE_ID_ATHEROS_AR5210_DEFAULT    0x1107 /* AR5210 (no eeprom) */
44 #define PCI_DEVICE_ID_ATHEROS_AR5212_DEFAULT    0x1113 /* AR5212 (no eeprom) */
45 #define PCI_DEVICE_ID_ATHEROS_AR5211_DEFAULT    0x1112 /* AR5211 (no eeprom) */
46 #define PCI_DEVICE_ID_ATHEROS_AR5212_FPGA       0xf013 /* AR5212 (emulation board) */
47 #define PCI_DEVICE_ID_ATHEROS_AR5211_LEGACY     0xff12 /* AR5211 (emulation board) */
48 #define PCI_DEVICE_ID_ATHEROS_AR5211_FPGA11B    0xf11b /* AR5211 (emulation board) */
49 #define PCI_DEVICE_ID_ATHEROS_AR5312_REV2       0x0052 /* AR5312 WMAC (AP31) */
50 #define PCI_DEVICE_ID_ATHEROS_AR5312_REV7       0x0057 /* AR5312 WMAC (AP30-040) */
51 #define PCI_DEVICE_ID_ATHEROS_AR5312_REV8       0x0058 /* AR5312 WMAC (AP43-030) */
52 #define PCI_DEVICE_ID_ATHEROS_AR5212_0014       0x0014 /* AR5212 compatible */
53 #define PCI_DEVICE_ID_ATHEROS_AR5212_0015       0x0015 /* AR5212 compatible */
54 #define PCI_DEVICE_ID_ATHEROS_AR5212_0016       0x0016 /* AR5212 compatible */
55 #define PCI_DEVICE_ID_ATHEROS_AR5212_0017       0x0017 /* AR5212 compatible */
56 #define PCI_DEVICE_ID_ATHEROS_AR5212_0018       0x0018 /* AR5212 compatible */
57 #define PCI_DEVICE_ID_ATHEROS_AR5212_0019       0x0019 /* AR5212 compatible */
58 #define PCI_DEVICE_ID_ATHEROS_AR2413            0x001a /* AR2413 (Griffin-lite) */
59 #define PCI_DEVICE_ID_ATHEROS_AR5413            0x001b /* AR5413 (Eagle) */
60 #define PCI_DEVICE_ID_ATHEROS_AR5424            0x001c /* AR5424 (Condor PCI-E) */
61 #define PCI_DEVICE_ID_ATHEROS_AR5416            0x0023 /* AR5416 */
62 #define PCI_DEVICE_ID_ATHEROS_AR5418            0x0024 /* AR5418 */
63
64 /****************************\
65   GENERIC DRIVER DEFINITIONS
66 \****************************/
67
68 #define ATH5K_PRINTF(fmt, ...)   printk("%s: " fmt, __func__, ##__VA_ARGS__)
69
70 #define ATH5K_PRINTK(_sc, _level, _fmt, ...) \
71         printk(_level "ath5k %s: " _fmt, \
72                 ((_sc) && (_sc)->hw) ? wiphy_name((_sc)->hw->wiphy) : "", \
73                 ##__VA_ARGS__)
74
75 #define ATH5K_PRINTK_LIMIT(_sc, _level, _fmt, ...) do { \
76         if (net_ratelimit()) \
77                 ATH5K_PRINTK(_sc, _level, _fmt, ##__VA_ARGS__); \
78         } while (0)
79
80 #define ATH5K_INFO(_sc, _fmt, ...) \
81         ATH5K_PRINTK(_sc, KERN_INFO, _fmt, ##__VA_ARGS__)
82
83 #define ATH5K_WARN(_sc, _fmt, ...) \
84         ATH5K_PRINTK_LIMIT(_sc, KERN_WARNING, _fmt, ##__VA_ARGS__)
85
86 #define ATH5K_ERR(_sc, _fmt, ...) \
87         ATH5K_PRINTK_LIMIT(_sc, KERN_ERR, _fmt, ##__VA_ARGS__)
88
89 /*
90  * Some tuneable values (these should be changeable by the user)
91  */
92 #define AR5K_TUNE_DMA_BEACON_RESP               2
93 #define AR5K_TUNE_SW_BEACON_RESP                10
94 #define AR5K_TUNE_ADDITIONAL_SWBA_BACKOFF       0
95 #define AR5K_TUNE_RADAR_ALERT                   false
96 #define AR5K_TUNE_MIN_TX_FIFO_THRES             1
97 #define AR5K_TUNE_MAX_TX_FIFO_THRES             ((IEEE80211_MAX_LEN / 64) + 1)
98 #define AR5K_TUNE_REGISTER_TIMEOUT              20000
99 /* Register for RSSI threshold has a mask of 0xff, so 255 seems to
100  * be the max value. */
101 #define AR5K_TUNE_RSSI_THRES                   129
102 /* This must be set when setting the RSSI threshold otherwise it can
103  * prevent a reset. If AR5K_RSSI_THR is read after writing to it
104  * the BMISS_THRES will be seen as 0, seems harware doesn't keep
105  * track of it. Max value depends on harware. For AR5210 this is just 7.
106  * For AR5211+ this seems to be up to 255. */
107 #define AR5K_TUNE_BMISS_THRES                  7
108 #define AR5K_TUNE_REGISTER_DWELL_TIME           20000
109 #define AR5K_TUNE_BEACON_INTERVAL               100
110 #define AR5K_TUNE_AIFS                          2
111 #define AR5K_TUNE_AIFS_11B                      2
112 #define AR5K_TUNE_AIFS_XR                       0
113 #define AR5K_TUNE_CWMIN                         15
114 #define AR5K_TUNE_CWMIN_11B                     31
115 #define AR5K_TUNE_CWMIN_XR                      3
116 #define AR5K_TUNE_CWMAX                         1023
117 #define AR5K_TUNE_CWMAX_11B                     1023
118 #define AR5K_TUNE_CWMAX_XR                      7
119 #define AR5K_TUNE_NOISE_FLOOR                   -72
120 #define AR5K_TUNE_MAX_TXPOWER                   60
121 #define AR5K_TUNE_DEFAULT_TXPOWER               30
122 #define AR5K_TUNE_TPC_TXPOWER                   true
123 #define AR5K_TUNE_ANT_DIVERSITY                 true
124 #define AR5K_TUNE_HWTXTRIES                     4
125
126 /* token to use for aifs, cwmin, cwmax in MadWiFi */
127 #define AR5K_TXQ_USEDEFAULT     ((u32) -1)
128
129 /* GENERIC CHIPSET DEFINITIONS */
130
131 /* MAC Chips */
132 enum ath5k_version {
133         AR5K_AR5210     = 0,
134         AR5K_AR5211     = 1,
135         AR5K_AR5212     = 2,
136 };
137
138 /* PHY Chips */
139 enum ath5k_radio {
140         AR5K_RF5110     = 0,
141         AR5K_RF5111     = 1,
142         AR5K_RF5112     = 2,
143         AR5K_RF2413     = 3,
144         AR5K_RF5413     = 4,
145         AR5K_RF2425     = 5,
146 };
147
148 /*
149  * Common silicon revision/version values
150  */
151
152 enum ath5k_srev_type {
153         AR5K_VERSION_VER,
154         AR5K_VERSION_RAD,
155 };
156
157 struct ath5k_srev_name {
158         const char              *sr_name;
159         enum ath5k_srev_type    sr_type;
160         u_int                   sr_val;
161 };
162
163 #define AR5K_SREV_UNKNOWN       0xffff
164
165 #define AR5K_SREV_VER_AR5210    0x00
166 #define AR5K_SREV_VER_AR5311    0x10
167 #define AR5K_SREV_VER_AR5311A   0x20
168 #define AR5K_SREV_VER_AR5311B   0x30
169 #define AR5K_SREV_VER_AR5211    0x40
170 #define AR5K_SREV_VER_AR5212    0x50
171 #define AR5K_SREV_VER_AR5213    0x55
172 #define AR5K_SREV_VER_AR5213A   0x59
173 #define AR5K_SREV_VER_AR2413    0x78
174 #define AR5K_SREV_VER_AR2414    0x79
175 #define AR5K_SREV_VER_AR2424    0xa0 /* PCI-E */
176 #define AR5K_SREV_VER_AR5424    0xa3 /* PCI-E */
177 #define AR5K_SREV_VER_AR5413    0xa4
178 #define AR5K_SREV_VER_AR5414    0xa5
179 #define AR5K_SREV_VER_AR5416    0xc0 /* PCI-E */
180 #define AR5K_SREV_VER_AR5418    0xca /* PCI-E */
181 #define AR5K_SREV_VER_AR2425    0xe2 /* PCI-E */
182
183 #define AR5K_SREV_RAD_5110      0x00
184 #define AR5K_SREV_RAD_5111      0x10
185 #define AR5K_SREV_RAD_5111A     0x15
186 #define AR5K_SREV_RAD_2111      0x20
187 #define AR5K_SREV_RAD_5112      0x30
188 #define AR5K_SREV_RAD_5112A     0x35
189 #define AR5K_SREV_RAD_2112      0x40
190 #define AR5K_SREV_RAD_2112A     0x45
191 #define AR5K_SREV_RAD_SC0       0x56    /* Found on 2413/2414 */
192 #define AR5K_SREV_RAD_SC1       0x63    /* Found on 5413/5414 */
193 #define AR5K_SREV_RAD_SC2       0xa2    /* Found on 2424-5/5424 */
194 #define AR5K_SREV_RAD_5133      0xc0    /* MIMO found on 5418 */
195
196 /* IEEE defs */
197
198 #define IEEE80211_MAX_LEN       2500
199
200 /* TODO add support to mac80211 for vendor-specific rates and modes */
201
202 /*
203  * Some of this information is based on Documentation from:
204  *
205  * http://madwifi.org/wiki/ChipsetFeatures/SuperAG
206  *
207  * Modulation for Atheros' eXtended Range - range enhancing extension that is
208  * supposed to double the distance an Atheros client device can keep a
209  * connection with an Atheros access point. This is achieved by increasing
210  * the receiver sensitivity up to, -105dBm, which is about 20dB above what
211  * the 802.11 specifications demand. In addition, new (proprietary) data rates
212  * are introduced: 3, 2, 1, 0.5 and 0.25 MBit/s.
213  *
214  * Please note that can you either use XR or TURBO but you cannot use both,
215  * they are exclusive.
216  *
217  */
218 #define MODULATION_XR           0x00000200
219 /*
220  * Modulation for Atheros' Turbo G and Turbo A, its supposed to provide a
221  * throughput transmission speed up to 40Mbit/s-60Mbit/s at a 108Mbit/s
222  * signaling rate achieved through the bonding of two 54Mbit/s 802.11g
223  * channels. To use this feature your Access Point must also suport it.
224  * There is also a distinction between "static" and "dynamic" turbo modes:
225  *
226  * - Static: is the dumb version: devices set to this mode stick to it until
227  *     the mode is turned off.
228  * - Dynamic: is the intelligent version, the network decides itself if it
229  *     is ok to use turbo. As soon as traffic is detected on adjacent channels
230  *     (which would get used in turbo mode), or when a non-turbo station joins
231  *     the network, turbo mode won't be used until the situation changes again.
232  *     Dynamic mode is achieved by Atheros' Adaptive Radio (AR) feature which
233  *     monitors the used radio band in order to decide whether turbo mode may
234  *     be used or not.
235  *
236  * This article claims Super G sticks to bonding of channels 5 and 6 for
237  * USA:
238  *
239  * http://www.pcworld.com/article/id,113428-page,1/article.html
240  *
241  * The channel bonding seems to be driver specific though. In addition to
242  * deciding what channels will be used, these "Turbo" modes are accomplished
243  * by also enabling the following features:
244  *
245  * - Bursting: allows multiple frames to be sent at once, rather than pausing
246  *     after each frame. Bursting is a standards-compliant feature that can be
247  *     used with any Access Point.
248  * - Fast frames: increases the amount of information that can be sent per
249  *     frame, also resulting in a reduction of transmission overhead. It is a
250  *     proprietary feature that needs to be supported by the Access Point.
251  * - Compression: data frames are compressed in real time using a Lempel Ziv
252  *     algorithm. This is done transparently. Once this feature is enabled,
253  *     compression and decompression takes place inside the chipset, without
254  *     putting additional load on the host CPU.
255  *
256  */
257 #define MODULATION_TURBO        0x00000080
258
259 enum ath5k_driver_mode {
260         AR5K_MODE_11A           =       0,
261         AR5K_MODE_11A_TURBO     =       1,
262         AR5K_MODE_11B           =       2,
263         AR5K_MODE_11G           =       3,
264         AR5K_MODE_11G_TURBO     =       4,
265         AR5K_MODE_XR            =       0,
266         AR5K_MODE_MAX           =       5
267 };
268
269 /* adding this flag to rate_code enables short preamble, see ar5212_reg.h */
270 #define AR5K_SET_SHORT_PREAMBLE 0x04
271
272 #define HAS_SHPREAMBLE(_ix) \
273         (rt->rates[_ix].modulation == IEEE80211_RATE_SHORT_PREAMBLE)
274 #define SHPREAMBLE_FLAG(_ix) \
275         (HAS_SHPREAMBLE(_ix) ? AR5K_SET_SHORT_PREAMBLE : 0)
276
277
278 /****************\
279   TX DEFINITIONS
280 \****************/
281
282 /*
283  * TX Status
284  */
285 struct ath5k_tx_status {
286         u16     ts_seqnum;
287         u16     ts_tstamp;
288         u8      ts_status;
289         u8      ts_rate;
290         s8      ts_rssi;
291         u8      ts_shortretry;
292         u8      ts_longretry;
293         u8      ts_virtcol;
294         u8      ts_antenna;
295 };
296
297 #define AR5K_TXSTAT_ALTRATE     0x80
298 #define AR5K_TXERR_XRETRY       0x01
299 #define AR5K_TXERR_FILT         0x02
300 #define AR5K_TXERR_FIFO         0x04
301
302 /**
303  * enum ath5k_tx_queue - Queue types used to classify tx queues.
304  * @AR5K_TX_QUEUE_INACTIVE: q is unused -- see ath5k_hw_release_tx_queue
305  * @AR5K_TX_QUEUE_DATA: A normal data queue
306  * @AR5K_TX_QUEUE_XR_DATA: An XR-data queue
307  * @AR5K_TX_QUEUE_BEACON: The beacon queue
308  * @AR5K_TX_QUEUE_CAB: The after-beacon queue
309  * @AR5K_TX_QUEUE_UAPSD: Unscheduled Automatic Power Save Delivery queue
310  */
311 enum ath5k_tx_queue {
312         AR5K_TX_QUEUE_INACTIVE = 0,
313         AR5K_TX_QUEUE_DATA,
314         AR5K_TX_QUEUE_XR_DATA,
315         AR5K_TX_QUEUE_BEACON,
316         AR5K_TX_QUEUE_CAB,
317         AR5K_TX_QUEUE_UAPSD,
318 };
319
320 #define AR5K_NUM_TX_QUEUES              10
321 #define AR5K_NUM_TX_QUEUES_NOQCU        2
322
323 /*
324  * Queue syb-types to classify normal data queues.
325  * These are the 4 Access Categories as defined in
326  * WME spec. 0 is the lowest priority and 4 is the
327  * highest. Normal data that hasn't been classified
328  * goes to the Best Effort AC.
329  */
330 enum ath5k_tx_queue_subtype {
331         AR5K_WME_AC_BK = 0,     /*Background traffic*/
332         AR5K_WME_AC_BE,         /*Best-effort (normal) traffic)*/
333         AR5K_WME_AC_VI,         /*Video traffic*/
334         AR5K_WME_AC_VO,         /*Voice traffic*/
335 };
336
337 /*
338  * Queue ID numbers as returned by the hw functions, each number
339  * represents a hw queue. If hw does not support hw queues
340  * (eg 5210) all data goes in one queue. These match
341  * d80211 definitions (net80211/MadWiFi don't use them).
342  */
343 enum ath5k_tx_queue_id {
344         AR5K_TX_QUEUE_ID_NOQCU_DATA     = 0,
345         AR5K_TX_QUEUE_ID_NOQCU_BEACON   = 1,
346         AR5K_TX_QUEUE_ID_DATA_MIN       = 0, /*IEEE80211_TX_QUEUE_DATA0*/
347         AR5K_TX_QUEUE_ID_DATA_MAX       = 4, /*IEEE80211_TX_QUEUE_DATA4*/
348         AR5K_TX_QUEUE_ID_DATA_SVP       = 5, /*IEEE80211_TX_QUEUE_SVP - Spectralink Voice Protocol*/
349         AR5K_TX_QUEUE_ID_CAB            = 6, /*IEEE80211_TX_QUEUE_AFTER_BEACON*/
350         AR5K_TX_QUEUE_ID_BEACON         = 7, /*IEEE80211_TX_QUEUE_BEACON*/
351         AR5K_TX_QUEUE_ID_UAPSD          = 8,
352         AR5K_TX_QUEUE_ID_XR_DATA        = 9,
353 };
354
355
356 /*
357  * Flags to set hw queue's parameters...
358  */
359 #define AR5K_TXQ_FLAG_TXOKINT_ENABLE            0x0001  /* Enable TXOK interrupt */
360 #define AR5K_TXQ_FLAG_TXERRINT_ENABLE           0x0002  /* Enable TXERR interrupt */
361 #define AR5K_TXQ_FLAG_TXEOLINT_ENABLE           0x0004  /* Enable TXEOL interrupt -not used- */
362 #define AR5K_TXQ_FLAG_TXDESCINT_ENABLE          0x0008  /* Enable TXDESC interrupt -not used- */
363 #define AR5K_TXQ_FLAG_TXURNINT_ENABLE           0x0010  /* Enable TXURN interrupt */
364 #define AR5K_TXQ_FLAG_BACKOFF_DISABLE           0x0020  /* Disable random post-backoff */
365 #define AR5K_TXQ_FLAG_RDYTIME_EXP_POLICY_ENABLE 0x0040  /* Enable ready time expiry policy (?)*/
366 #define AR5K_TXQ_FLAG_FRAG_BURST_BACKOFF_ENABLE 0x0080  /* Enable backoff while bursting */
367 #define AR5K_TXQ_FLAG_POST_FR_BKOFF_DIS         0x0100  /* Disable backoff while bursting */
368 #define AR5K_TXQ_FLAG_COMPRESSION_ENABLE        0x0200  /* Enable hw compression -not implemented-*/
369
370 /*
371  * A struct to hold tx queue's parameters
372  */
373 struct ath5k_txq_info {
374         enum ath5k_tx_queue tqi_type;
375         enum ath5k_tx_queue_subtype tqi_subtype;
376         u16     tqi_flags;      /* Tx queue flags (see above) */
377         u32     tqi_aifs;       /* Arbitrated Interframe Space */
378         s32     tqi_cw_min;     /* Minimum Contention Window */
379         s32     tqi_cw_max;     /* Maximum Contention Window */
380         u32     tqi_cbr_period; /* Constant bit rate period */
381         u32     tqi_cbr_overflow_limit;
382         u32     tqi_burst_time;
383         u32     tqi_ready_time; /* Not used */
384 };
385
386 /*
387  * Transmit packet types.
388  * These are not fully used inside OpenHAL yet
389  */
390 enum ath5k_pkt_type {
391         AR5K_PKT_TYPE_NORMAL            = 0,
392         AR5K_PKT_TYPE_ATIM              = 1,
393         AR5K_PKT_TYPE_PSPOLL            = 2,
394         AR5K_PKT_TYPE_BEACON            = 3,
395         AR5K_PKT_TYPE_PROBE_RESP        = 4,
396         AR5K_PKT_TYPE_PIFS              = 5,
397 };
398
399 /*
400  * TX power and TPC settings
401  */
402 #define AR5K_TXPOWER_OFDM(_r, _v)       (                       \
403         ((0 & 1) << ((_v) + 6)) |                               \
404         (((ah->ah_txpower.txp_rates[(_r)]) & 0x3f) << (_v))     \
405 )
406
407 #define AR5K_TXPOWER_CCK(_r, _v)        (                       \
408         (ah->ah_txpower.txp_rates[(_r)] & 0x3f) << (_v) \
409 )
410
411 /*
412  * DMA size definitions (2^n+2)
413  */
414 enum ath5k_dmasize {
415         AR5K_DMASIZE_4B = 0,
416         AR5K_DMASIZE_8B,
417         AR5K_DMASIZE_16B,
418         AR5K_DMASIZE_32B,
419         AR5K_DMASIZE_64B,
420         AR5K_DMASIZE_128B,
421         AR5K_DMASIZE_256B,
422         AR5K_DMASIZE_512B
423 };
424
425
426 /****************\
427   RX DEFINITIONS
428 \****************/
429
430 /*
431  * RX Status
432  */
433 struct ath5k_rx_status {
434         u16     rs_datalen;
435         u16     rs_tstamp;
436         u8      rs_status;
437         u8      rs_phyerr;
438         s8      rs_rssi;
439         u8      rs_keyix;
440         u8      rs_rate;
441         u8      rs_antenna;
442         u8      rs_more;
443 };
444
445 #define AR5K_RXERR_CRC          0x01
446 #define AR5K_RXERR_PHY          0x02
447 #define AR5K_RXERR_FIFO         0x04
448 #define AR5K_RXERR_DECRYPT      0x08
449 #define AR5K_RXERR_MIC          0x10
450 #define AR5K_RXKEYIX_INVALID    ((u8) - 1)
451 #define AR5K_TXKEYIX_INVALID    ((u32) - 1)
452
453
454 /**************************\
455  BEACON TIMERS DEFINITIONS
456 \**************************/
457
458 #define AR5K_BEACON_PERIOD      0x0000ffff
459 #define AR5K_BEACON_ENA         0x00800000 /*enable beacon xmit*/
460 #define AR5K_BEACON_RESET_TSF   0x01000000 /*force a TSF reset*/
461
462 #if 0
463 /**
464  * struct ath5k_beacon_state - Per-station beacon timer state.
465  * @bs_interval: in TU's, can also include the above flags
466  * @bs_cfp_max_duration: if non-zero hw is setup to coexist with a
467  *      Point Coordination Function capable AP
468  */
469 struct ath5k_beacon_state {
470         u32     bs_next_beacon;
471         u32     bs_next_dtim;
472         u32     bs_interval;
473         u8      bs_dtim_period;
474         u8      bs_cfp_period;
475         u16     bs_cfp_max_duration;
476         u16     bs_cfp_du_remain;
477         u16     bs_tim_offset;
478         u16     bs_sleep_duration;
479         u16     bs_bmiss_threshold;
480         u32     bs_cfp_next;
481 };
482 #endif
483
484
485 /*
486  * TSF to TU conversion:
487  *
488  * TSF is a 64bit value in usec (microseconds).
489  * TU is a 32bit value and defined by IEEE802.11 (page 6) as "A measurement of
490  * time equal to 1024 usec", so it's roughly milliseconds (usec / 1024).
491  */
492 #define TSF_TO_TU(_tsf) (u32)((_tsf) >> 10)
493
494
495 /********************\
496   COMMON DEFINITIONS
497 \********************/
498
499 /*
500  * Atheros hardware descriptor
501  * This is read and written to by the hardware
502  */
503 struct ath5k_desc {
504         u32     ds_link;        /* physical address of the next descriptor */
505         u32     ds_data;        /* physical address of data buffer (skb) */
506
507         union {
508                 struct ath5k_hw_5210_tx_desc    ds_tx5210;
509                 struct ath5k_hw_5212_tx_desc    ds_tx5212;
510                 struct ath5k_hw_all_rx_desc     ds_rx;
511         } ud;
512 } __packed;
513
514 #define AR5K_RXDESC_INTREQ      0x0020
515
516 #define AR5K_TXDESC_CLRDMASK    0x0001
517 #define AR5K_TXDESC_NOACK       0x0002  /*[5211+]*/
518 #define AR5K_TXDESC_RTSENA      0x0004
519 #define AR5K_TXDESC_CTSENA      0x0008
520 #define AR5K_TXDESC_INTREQ      0x0010
521 #define AR5K_TXDESC_VEOL        0x0020  /*[5211+]*/
522
523 #define AR5K_SLOT_TIME_9        396
524 #define AR5K_SLOT_TIME_20       880
525 #define AR5K_SLOT_TIME_MAX      0xffff
526
527 /* channel_flags */
528 #define CHANNEL_CW_INT  0x0008  /* Contention Window interference detected */
529 #define CHANNEL_TURBO   0x0010  /* Turbo Channel */
530 #define CHANNEL_CCK     0x0020  /* CCK channel */
531 #define CHANNEL_OFDM    0x0040  /* OFDM channel */
532 #define CHANNEL_2GHZ    0x0080  /* 2GHz channel. */
533 #define CHANNEL_5GHZ    0x0100  /* 5GHz channel */
534 #define CHANNEL_PASSIVE 0x0200  /* Only passive scan allowed */
535 #define CHANNEL_DYN     0x0400  /* Dynamic CCK-OFDM channel (for g operation) */
536 #define CHANNEL_XR      0x0800  /* XR channel */
537
538 #define CHANNEL_A       (CHANNEL_5GHZ|CHANNEL_OFDM)
539 #define CHANNEL_B       (CHANNEL_2GHZ|CHANNEL_CCK)
540 #define CHANNEL_G       (CHANNEL_2GHZ|CHANNEL_OFDM)
541 #define CHANNEL_T       (CHANNEL_5GHZ|CHANNEL_OFDM|CHANNEL_TURBO)
542 #define CHANNEL_TG      (CHANNEL_2GHZ|CHANNEL_OFDM|CHANNEL_TURBO)
543 #define CHANNEL_108A    CHANNEL_T
544 #define CHANNEL_108G    CHANNEL_TG
545 #define CHANNEL_X       (CHANNEL_5GHZ|CHANNEL_OFDM|CHANNEL_XR)
546
547 #define CHANNEL_ALL     (CHANNEL_OFDM|CHANNEL_CCK|CHANNEL_2GHZ|CHANNEL_5GHZ| \
548                 CHANNEL_TURBO)
549
550 #define CHANNEL_ALL_NOTURBO     (CHANNEL_ALL & ~CHANNEL_TURBO)
551 #define CHANNEL_MODES           CHANNEL_ALL
552
553 /*
554  * Used internaly in OpenHAL (ar5211.c/ar5212.c
555  * for reset_tx_queue). Also see struct struct ieee80211_channel.
556  */
557 #define IS_CHAN_XR(_c)  ((_c.hw_value & CHANNEL_XR) != 0)
558 #define IS_CHAN_B(_c)   ((_c.hw_value & CHANNEL_B) != 0)
559
560 /*
561  * The following structure will be used to map 2GHz channels to
562  * 5GHz Atheros channels.
563  */
564 struct ath5k_athchan_2ghz {
565         u32     a2_flags;
566         u16     a2_athchan;
567 };
568
569 /*
570  * Rate definitions
571  * TODO: Clean them up or move them on mac80211 -most of these infos are
572  *       used by the rate control algorytm on MadWiFi.
573  */
574
575 /* Max number of rates on the rate table and what it seems
576  * Atheros hardware supports */
577 #define AR5K_MAX_RATES 32
578
579 /**
580  * struct ath5k_rate - rate structure
581  * @valid: is this a valid rate for rate control (remove)
582  * @modulation: respective mac80211 modulation
583  * @rate_kbps: rate in kbit/s
584  * @rate_code: hardware rate value, used in &struct ath5k_desc, on RX on
585  *     &struct ath5k_rx_status.rs_rate and on TX on
586  *     &struct ath5k_tx_status.ts_rate. Seems the ar5xxx harware supports
587  *     up to 32 rates, indexed by 1-32. This means we really only need
588  *     6 bits for the rate_code.
589  * @dot11_rate: respective IEEE-802.11 rate value
590  * @control_rate: index of rate assumed to be used to send control frames.
591  *     This can be used to set override the value on the rate duration
592  *     registers. This is only useful if we can override in the harware at
593  *     what rate we want to send control frames at. Note that IEEE-802.11
594  *     Ch. 9.6 (after IEEE 802.11g changes) defines the rate at which we
595  *     should send ACK/CTS, if we change this value we can be breaking
596  *     the spec.
597  *
598  * This structure is used to get the RX rate or set the TX rate on the
599  * hardware descriptors. It is also used for internal modulation control
600  * and settings.
601  *
602  * On RX after the &struct ath5k_desc is parsed by the appropriate
603  * ah_proc_rx_desc() the respective hardware rate value is set in
604  * &struct ath5k_rx_status.rs_rate. On TX the desired rate is set in
605  * &struct ath5k_tx_status.ts_rate which is later used to setup the
606  * &struct ath5k_desc correctly. This is the hardware rate map we are
607  * aware of:
608  *
609  * rate_code   1       2       3       4       5       6       7       8
610  * rate_kbps   3000    1000    ?       ?       ?       2000    500     48000
611  *
612  * rate_code   9       10      11      12      13      14      15      16
613  * rate_kbps   24000   12000   6000    54000   36000   18000   9000    ?
614  *
615  * rate_code   17      18      19      20      21      22      23      24
616  * rate_kbps   ?       ?       ?       ?       ?       ?       ?       11000
617  *
618  * rate_code   25      26      27      28      29      30      31      32
619  * rate_kbps   5500    2000    1000    ?       ?       ?       ?       ?
620  *
621  */
622 struct ath5k_rate {
623         u8      valid;
624         u32     modulation;
625         u16     rate_kbps;
626         u8      rate_code;
627         u8      dot11_rate;
628         u8      control_rate;
629 };
630
631 /* XXX: GRR all this stuff to get leds blinking ??? (check out setcurmode) */
632 struct ath5k_rate_table {
633         u16     rate_count;
634         u8      rate_code_to_index[AR5K_MAX_RATES];     /* Back-mapping */
635         struct ath5k_rate rates[AR5K_MAX_RATES];
636 };
637
638 /*
639  * Rate tables...
640  * TODO: CLEAN THIS !!!
641  */
642 #define AR5K_RATES_11A { 8, {                                   \
643         255, 255, 255, 255, 255, 255, 255, 255, 6, 4, 2, 0,     \
644         7, 5, 3, 1, 255, 255, 255, 255, 255, 255, 255, 255,     \
645         255, 255, 255, 255, 255, 255, 255, 255 }, {             \
646         { 1, 0, 6000, 11, 140, 0 },             \
647         { 1, 0, 9000, 15, 18, 0 },              \
648         { 1, 0, 12000, 10, 152, 2 },            \
649         { 1, 0, 18000, 14, 36, 2 },             \
650         { 1, 0, 24000, 9, 176, 4 },             \
651         { 1, 0, 36000, 13, 72, 4 },             \
652         { 1, 0, 48000, 8, 96, 4 },              \
653         { 1, 0, 54000, 12, 108, 4 } }           \
654 }
655
656 #define AR5K_RATES_11B { 4, {                                           \
657         255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255,     \
658         255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255,     \
659         3, 2, 1, 0, 255, 255, 255, 255 }, {                             \
660         { 1, 0, 1000, 27, 130, 0 },     \
661         { 1, IEEE80211_RATE_SHORT_PREAMBLE, 2000, 26, 132, 1 }, \
662         { 1, IEEE80211_RATE_SHORT_PREAMBLE, 5500, 25, 139, 1 }, \
663         { 1, IEEE80211_RATE_SHORT_PREAMBLE, 11000, 24, 150, 1 } }       \
664 }
665
666 #define AR5K_RATES_11G { 12, {                                  \
667         255, 255, 255, 255, 255, 255, 255, 255, 10, 8, 6, 4,    \
668         11, 9, 7, 5, 255, 255, 255, 255, 255, 255, 255, 255,    \
669         3, 2, 1, 0, 255, 255, 255, 255 }, {                     \
670         { 1, 0, 1000, 27, 2, 0 },               \
671         { 1, IEEE80211_RATE_SHORT_PREAMBLE, 2000, 26, 4, 1 },           \
672         { 1, IEEE80211_RATE_SHORT_PREAMBLE, 5500, 25, 11, 1 },          \
673         { 1, IEEE80211_RATE_SHORT_PREAMBLE, 11000, 24, 22, 1 }, \
674         { 0, 0, 6000, 11, 12, 4 },      \
675         { 0, 0, 9000, 15, 18, 4 },      \
676         { 1, 0, 12000, 10, 24, 6 },     \
677         { 1, 0, 18000, 14, 36, 6 },     \
678         { 1, 0, 24000, 9, 48, 8 },      \
679         { 1, 0, 36000, 13, 72, 8 },     \
680         { 1, 0, 48000, 8, 96, 8 },      \
681         { 1, 0, 54000, 12, 108, 8 } }   \
682 }
683
684 #define AR5K_RATES_TURBO { 8, {                                 \
685         255, 255, 255, 255, 255, 255, 255, 255, 6, 4, 2, 0,     \
686         7, 5, 3, 1, 255, 255, 255, 255, 255, 255, 255, 255,     \
687         255, 255, 255, 255, 255, 255, 255, 255 }, {             \
688         { 1, MODULATION_TURBO, 6000, 11, 140, 0 },      \
689         { 1, MODULATION_TURBO, 9000, 15, 18, 0 },       \
690         { 1, MODULATION_TURBO, 12000, 10, 152, 2 },     \
691         { 1, MODULATION_TURBO, 18000, 14, 36, 2 },      \
692         { 1, MODULATION_TURBO, 24000, 9, 176, 4 },      \
693         { 1, MODULATION_TURBO, 36000, 13, 72, 4 },      \
694         { 1, MODULATION_TURBO, 48000, 8, 96, 4 },       \
695         { 1, MODULATION_TURBO, 54000, 12, 108, 4 } }    \
696 }
697
698 #define AR5K_RATES_XR { 12, {                                   \
699         255, 3, 1, 255, 255, 255, 2, 0, 10, 8, 6, 4,            \
700         11, 9, 7, 5, 255, 255, 255, 255, 255, 255, 255, 255,    \
701         255, 255, 255, 255, 255, 255, 255, 255 }, {             \
702         { 1, MODULATION_XR, 500, 7, 129, 0 },           \
703         { 1, MODULATION_XR, 1000, 2, 139, 1 },          \
704         { 1, MODULATION_XR, 2000, 6, 150, 2 },          \
705         { 1, MODULATION_XR, 3000, 1, 150, 3 },          \
706         { 1, 0, 6000, 11, 140, 4 },     \
707         { 1, 0, 9000, 15, 18, 4 },      \
708         { 1, 0, 12000, 10, 152, 6 },    \
709         { 1, 0, 18000, 14, 36, 6 },     \
710         { 1, 0, 24000, 9, 176, 8 },     \
711         { 1, 0, 36000, 13, 72, 8 },     \
712         { 1, 0, 48000, 8, 96, 8 },      \
713         { 1, 0, 54000, 12, 108, 8 } }   \
714 }
715
716 /*
717  * Crypto definitions
718  */
719
720 #define AR5K_KEYCACHE_SIZE      8
721
722 /***********************\
723  HW RELATED DEFINITIONS
724 \***********************/
725
726 /*
727  * Misc definitions
728  */
729 #define AR5K_RSSI_EP_MULTIPLIER (1<<7)
730
731 #define AR5K_ASSERT_ENTRY(_e, _s) do {          \
732         if (_e >= _s)                           \
733                 return (false);                 \
734 } while (0)
735
736
737 enum ath5k_ant_setting {
738         AR5K_ANT_VARIABLE       = 0,    /* variable by programming */
739         AR5K_ANT_FIXED_A        = 1,    /* fixed to 11a frequencies */
740         AR5K_ANT_FIXED_B        = 2,    /* fixed to 11b frequencies */
741         AR5K_ANT_MAX            = 3,
742 };
743
744 /*
745  * Hardware interrupt abstraction
746  */
747
748 /**
749  * enum ath5k_int - Hardware interrupt masks helpers
750  *
751  * @AR5K_INT_RX: mask to identify received frame interrupts, of type
752  *      AR5K_ISR_RXOK or AR5K_ISR_RXERR
753  * @AR5K_INT_RXDESC: Request RX descriptor/Read RX descriptor (?)
754  * @AR5K_INT_RXNOFRM: No frame received (?)
755  * @AR5K_INT_RXEOL: received End Of List for VEOL (Virtual End Of List). The
756  *      Queue Control Unit (QCU) signals an EOL interrupt only if a descriptor's
757  *      LinkPtr is NULL. For more details, refer to:
758  *      http://www.freepatentsonline.com/20030225739.html
759  * @AR5K_INT_RXORN: Indicates we got RX overrun (eg. no more descriptors).
760  *      Note that Rx overrun is not always fatal, on some chips we can continue
761  *      operation without reseting the card, that's why int_fatal is not
762  *      common for all chips.
763  * @AR5K_INT_TX: mask to identify received frame interrupts, of type
764  *      AR5K_ISR_TXOK or AR5K_ISR_TXERR
765  * @AR5K_INT_TXDESC: Request TX descriptor/Read TX status descriptor (?)
766  * @AR5K_INT_TXURN: received when we should increase the TX trigger threshold
767  *      We currently do increments on interrupt by
768  *      (AR5K_TUNE_MAX_TX_FIFO_THRES - current_trigger_level) / 2
769  * @AR5K_INT_MIB: Indicates the Management Information Base counters should be
770  *      checked. We should do this with ath5k_hw_update_mib_counters() but
771  *      it seems we should also then do some noise immunity work.
772  * @AR5K_INT_RXPHY: RX PHY Error
773  * @AR5K_INT_RXKCM: ??
774  * @AR5K_INT_SWBA: SoftWare Beacon Alert - indicates its time to send a
775  *      beacon that must be handled in software. The alternative is if you
776  *      have VEOL support, in that case you let the hardware deal with things.
777  * @AR5K_INT_BMISS: If in STA mode this indicates we have stopped seeing
778  *      beacons from the AP have associated with, we should probably try to
779  *      reassociate. When in IBSS mode this might mean we have not received
780  *      any beacons from any local stations. Note that every station in an
781  *      IBSS schedules to send beacons at the Target Beacon Transmission Time
782  *      (TBTT) with a random backoff.
783  * @AR5K_INT_BNR: Beacon Not Ready interrupt - ??
784  * @AR5K_INT_GPIO: GPIO interrupt is used for RF Kill, disabled for now
785  *      until properly handled
786  * @AR5K_INT_FATAL: Fatal errors were encountered, typically caused by DMA
787  *      errors. These types of errors we can enable seem to be of type
788  *      AR5K_SIMR2_MCABT, AR5K_SIMR2_SSERR and AR5K_SIMR2_DPERR.
789  * @AR5K_INT_GLOBAL: Seems to be used to clear and set the IER
790  * @AR5K_INT_NOCARD: signals the card has been removed
791  * @AR5K_INT_COMMON: common interrupts shared amogst MACs with the same
792  *      bit value
793  *
794  * These are mapped to take advantage of some common bits
795  * between the MACs, to be able to set intr properties
796  * easier. Some of them are not used yet inside hw.c. Most map
797  * to the respective hw interrupt value as they are common amogst different
798  * MACs.
799  */
800 enum ath5k_int {
801         AR5K_INT_RX     = 0x00000001, /* Not common */
802         AR5K_INT_RXDESC = 0x00000002,
803         AR5K_INT_RXNOFRM = 0x00000008,
804         AR5K_INT_RXEOL  = 0x00000010,
805         AR5K_INT_RXORN  = 0x00000020,
806         AR5K_INT_TX     = 0x00000040, /* Not common */
807         AR5K_INT_TXDESC = 0x00000080,
808         AR5K_INT_TXURN  = 0x00000800,
809         AR5K_INT_MIB    = 0x00001000,
810         AR5K_INT_RXPHY  = 0x00004000,
811         AR5K_INT_RXKCM  = 0x00008000,
812         AR5K_INT_SWBA   = 0x00010000,
813         AR5K_INT_BMISS  = 0x00040000,
814         AR5K_INT_BNR    = 0x00100000, /* Not common */
815         AR5K_INT_GPIO   = 0x01000000,
816         AR5K_INT_FATAL  = 0x40000000, /* Not common */
817         AR5K_INT_GLOBAL = 0x80000000,
818
819         AR5K_INT_COMMON  = AR5K_INT_RXNOFRM
820                         | AR5K_INT_RXDESC
821                         | AR5K_INT_RXEOL
822                         | AR5K_INT_RXORN
823                         | AR5K_INT_TXURN
824                         | AR5K_INT_TXDESC
825                         | AR5K_INT_MIB
826                         | AR5K_INT_RXPHY
827                         | AR5K_INT_RXKCM
828                         | AR5K_INT_SWBA
829                         | AR5K_INT_BMISS
830                         | AR5K_INT_GPIO,
831         AR5K_INT_NOCARD = 0xffffffff
832 };
833
834 /*
835  * Power management
836  */
837 enum ath5k_power_mode {
838         AR5K_PM_UNDEFINED = 0,
839         AR5K_PM_AUTO,
840         AR5K_PM_AWAKE,
841         AR5K_PM_FULL_SLEEP,
842         AR5K_PM_NETWORK_SLEEP,
843 };
844
845 /*
846  * These match net80211 definitions (not used in
847  * d80211).
848  */
849 #define AR5K_LED_INIT   0 /*IEEE80211_S_INIT*/
850 #define AR5K_LED_SCAN   1 /*IEEE80211_S_SCAN*/
851 #define AR5K_LED_AUTH   2 /*IEEE80211_S_AUTH*/
852 #define AR5K_LED_ASSOC  3 /*IEEE80211_S_ASSOC*/
853 #define AR5K_LED_RUN    4 /*IEEE80211_S_RUN*/
854
855 /* GPIO-controlled software LED */
856 #define AR5K_SOFTLED_PIN        0
857 #define AR5K_SOFTLED_ON         0
858 #define AR5K_SOFTLED_OFF        1
859
860 /*
861  * Chipset capabilities -see ath5k_hw_get_capability-
862  * get_capability function is not yet fully implemented
863  * in OpenHAL so most of these don't work yet...
864  */
865 enum ath5k_capability_type {
866         AR5K_CAP_REG_DMN                = 0,    /* Used to get current reg. domain id */
867         AR5K_CAP_TKIP_MIC               = 2,    /* Can handle TKIP MIC in hardware */
868         AR5K_CAP_TKIP_SPLIT             = 3,    /* TKIP uses split keys */
869         AR5K_CAP_PHYCOUNTERS            = 4,    /* PHY error counters */
870         AR5K_CAP_DIVERSITY              = 5,    /* Supports fast diversity */
871         AR5K_CAP_NUM_TXQUEUES           = 6,    /* Used to get max number of hw txqueues */
872         AR5K_CAP_VEOL                   = 7,    /* Supports virtual EOL */
873         AR5K_CAP_COMPRESSION            = 8,    /* Supports compression */
874         AR5K_CAP_BURST                  = 9,    /* Supports packet bursting */
875         AR5K_CAP_FASTFRAME              = 10,   /* Supports fast frames */
876         AR5K_CAP_TXPOW                  = 11,   /* Used to get global tx power limit */
877         AR5K_CAP_TPC                    = 12,   /* Can do per-packet tx power control (needed for 802.11a) */
878         AR5K_CAP_BSSIDMASK              = 13,   /* Supports bssid mask */
879         AR5K_CAP_MCAST_KEYSRCH          = 14,   /* Supports multicast key search */
880         AR5K_CAP_TSF_ADJUST             = 15,   /* Supports beacon tsf adjust */
881         AR5K_CAP_XR                     = 16,   /* Supports XR mode */
882         AR5K_CAP_WME_TKIPMIC            = 17,   /* Supports TKIP MIC when using WMM */
883         AR5K_CAP_CHAN_HALFRATE          = 18,   /* Supports half rate channels */
884         AR5K_CAP_CHAN_QUARTERRATE       = 19,   /* Supports quarter rate channels */
885         AR5K_CAP_RFSILENT               = 20,   /* Supports RFsilent */
886 };
887
888
889 /* XXX: we *may* move cap_range stuff to struct wiphy */
890 struct ath5k_capabilities {
891         /*
892          * Supported PHY modes
893          * (ie. CHANNEL_A, CHANNEL_B, ...)
894          */
895         DECLARE_BITMAP(cap_mode, AR5K_MODE_MAX);
896
897         /*
898          * Frequency range (without regulation restrictions)
899          */
900         struct {
901                 u16     range_2ghz_min;
902                 u16     range_2ghz_max;
903                 u16     range_5ghz_min;
904                 u16     range_5ghz_max;
905         } cap_range;
906
907         /*
908          * Values stored in the EEPROM (some of them...)
909          */
910         struct ath5k_eeprom_info        cap_eeprom;
911
912         /*
913          * Queue information
914          */
915         struct {
916                 u8      q_tx_num;
917         } cap_queues;
918 };
919
920
921 /***************************************\
922   HARDWARE ABSTRACTION LAYER STRUCTURE
923 \***************************************/
924
925 /*
926  * Misc defines
927  */
928
929 #define AR5K_MAX_GPIO           10
930 #define AR5K_MAX_RF_BANKS       8
931
932 struct ath5k_hw {
933         u32                     ah_magic;
934
935         struct ath5k_softc      *ah_sc;
936         void __iomem            *ah_iobase;
937
938         enum ath5k_int          ah_imr;
939
940         enum ieee80211_if_types ah_op_mode;
941         enum ath5k_power_mode   ah_power_mode;
942         struct ieee80211_channel ah_current_channel;
943         bool                    ah_turbo;
944         bool                    ah_calibration;
945         bool                    ah_running;
946         bool                    ah_single_chip;
947         enum ath5k_rfgain       ah_rf_gain;
948
949         u32                     ah_mac_srev;
950         u16                     ah_mac_version;
951         u16                     ah_mac_revision;
952         u16                     ah_phy_revision;
953         u16                     ah_radio_5ghz_revision;
954         u16                     ah_radio_2ghz_revision;
955         u32                     ah_phy_spending;
956
957         enum ath5k_version      ah_version;
958         enum ath5k_radio        ah_radio;
959         u32                     ah_phy;
960
961         bool                    ah_5ghz;
962         bool                    ah_2ghz;
963
964 #define ah_regdomain            ah_capabilities.cap_regdomain.reg_current
965 #define ah_regdomain_hw         ah_capabilities.cap_regdomain.reg_hw
966 #define ah_modes                ah_capabilities.cap_mode
967 #define ah_ee_version           ah_capabilities.cap_eeprom.ee_version
968
969         u32                     ah_atim_window;
970         u32                     ah_aifs;
971         u32                     ah_cw_min;
972         u32                     ah_cw_max;
973         bool                    ah_software_retry;
974         u32                     ah_limit_tx_retries;
975
976         u32                     ah_antenna[AR5K_EEPROM_N_MODES][AR5K_ANT_MAX];
977         bool                    ah_ant_diversity;
978
979         u8                      ah_sta_id[ETH_ALEN];
980
981         /* Current BSSID we are trying to assoc to / creating.
982          * This is passed by mac80211 on config_interface() and cached here for
983          * use in resets */
984         u8                      ah_bssid[ETH_ALEN];
985
986         u32                     ah_gpio[AR5K_MAX_GPIO];
987         int                     ah_gpio_npins;
988
989         struct ath5k_capabilities ah_capabilities;
990
991         struct ath5k_txq_info   ah_txq[AR5K_NUM_TX_QUEUES];
992         u32                     ah_txq_status;
993         u32                     ah_txq_imr_txok;
994         u32                     ah_txq_imr_txerr;
995         u32                     ah_txq_imr_txurn;
996         u32                     ah_txq_imr_txdesc;
997         u32                     ah_txq_imr_txeol;
998         u32                     *ah_rf_banks;
999         size_t                  ah_rf_banks_size;
1000         struct ath5k_gain       ah_gain;
1001         u32                     ah_offset[AR5K_MAX_RF_BANKS];
1002
1003         struct {
1004                 u16             txp_pcdac[AR5K_EEPROM_POWER_TABLE_SIZE];
1005                 u16             txp_rates[AR5K_MAX_RATES];
1006                 s16             txp_min;
1007                 s16             txp_max;
1008                 bool            txp_tpc;
1009                 s16             txp_ofdm;
1010         } ah_txpower;
1011
1012         struct {
1013                 bool            r_enabled;
1014                 int             r_last_alert;
1015                 struct ieee80211_channel r_last_channel;
1016         } ah_radar;
1017
1018         /* noise floor from last periodic calibration */
1019         s32                     ah_noise_floor;
1020
1021         /*
1022          * Function pointers
1023          */
1024         int (*ah_setup_tx_desc)(struct ath5k_hw *, struct ath5k_desc *,
1025                 unsigned int, unsigned int, enum ath5k_pkt_type, unsigned int,
1026                 unsigned int, unsigned int, unsigned int, unsigned int,
1027                 unsigned int, unsigned int, unsigned int);
1028         int (*ah_setup_xtx_desc)(struct ath5k_hw *, struct ath5k_desc *,
1029                 unsigned int, unsigned int, unsigned int, unsigned int,
1030                 unsigned int, unsigned int);
1031         int (*ah_proc_tx_desc)(struct ath5k_hw *, struct ath5k_desc *,
1032                 struct ath5k_tx_status *);
1033         int (*ah_proc_rx_desc)(struct ath5k_hw *, struct ath5k_desc *,
1034                 struct ath5k_rx_status *);
1035 };
1036
1037 /*
1038  * Prototypes
1039  */
1040
1041 /* General Functions */
1042 extern int ath5k_hw_register_timeout(struct ath5k_hw *ah, u32 reg, u32 flag, u32 val, bool is_set);
1043 /* Attach/Detach Functions */
1044 extern struct ath5k_hw *ath5k_hw_attach(struct ath5k_softc *sc, u8 mac_version);
1045 extern const struct ath5k_rate_table *ath5k_hw_get_rate_table(struct ath5k_hw *ah, unsigned int mode);
1046 extern void ath5k_hw_detach(struct ath5k_hw *ah);
1047 /* Reset Functions */
1048 extern int ath5k_hw_reset(struct ath5k_hw *ah, enum ieee80211_if_types op_mode, struct ieee80211_channel *channel, bool change_channel);
1049 /* Power management functions */
1050 extern int ath5k_hw_set_power(struct ath5k_hw *ah, enum ath5k_power_mode mode, bool set_chip, u16 sleep_duration);
1051 /* DMA Related Functions */
1052 extern void ath5k_hw_start_rx(struct ath5k_hw *ah);
1053 extern int ath5k_hw_stop_rx_dma(struct ath5k_hw *ah);
1054 extern u32 ath5k_hw_get_rx_buf(struct ath5k_hw *ah);
1055 extern void ath5k_hw_put_rx_buf(struct ath5k_hw *ah, u32 phys_addr);
1056 extern int ath5k_hw_tx_start(struct ath5k_hw *ah, unsigned int queue);
1057 extern int ath5k_hw_stop_tx_dma(struct ath5k_hw *ah, unsigned int queue);
1058 extern u32 ath5k_hw_get_tx_buf(struct ath5k_hw *ah, unsigned int queue);
1059 extern int ath5k_hw_put_tx_buf(struct ath5k_hw *ah, unsigned int queue, u32 phys_addr);
1060 extern int ath5k_hw_update_tx_triglevel(struct ath5k_hw *ah, bool increase);
1061 /* Interrupt handling */
1062 extern bool ath5k_hw_is_intr_pending(struct ath5k_hw *ah);
1063 extern int ath5k_hw_get_isr(struct ath5k_hw *ah, enum ath5k_int *interrupt_mask);
1064 extern enum ath5k_int ath5k_hw_set_intr(struct ath5k_hw *ah, enum ath5k_int new_mask);
1065 extern void ath5k_hw_update_mib_counters(struct ath5k_hw *ah, struct ieee80211_low_level_stats *stats);
1066 /* EEPROM access functions */
1067 extern int ath5k_hw_set_regdomain(struct ath5k_hw *ah, u16 regdomain);
1068 /* Protocol Control Unit Functions */
1069 extern int ath5k_hw_set_opmode(struct ath5k_hw *ah);
1070 /* BSSID Functions */
1071 extern void ath5k_hw_get_lladdr(struct ath5k_hw *ah, u8 *mac);
1072 extern int ath5k_hw_set_lladdr(struct ath5k_hw *ah, const u8 *mac);
1073 extern void ath5k_hw_set_associd(struct ath5k_hw *ah, const u8 *bssid, u16 assoc_id);
1074 extern int ath5k_hw_set_bssid_mask(struct ath5k_hw *ah, const u8 *mask);
1075 /* Receive start/stop functions */
1076 extern void ath5k_hw_start_rx_pcu(struct ath5k_hw *ah);
1077 extern void ath5k_hw_stop_pcu_recv(struct ath5k_hw *ah);
1078 /* RX Filter functions */
1079 extern void ath5k_hw_set_mcast_filter(struct ath5k_hw *ah, u32 filter0, u32 filter1);
1080 extern int ath5k_hw_set_mcast_filterindex(struct ath5k_hw *ah, u32 index);
1081 extern int ath5k_hw_clear_mcast_filter_idx(struct ath5k_hw *ah, u32 index);
1082 extern u32 ath5k_hw_get_rx_filter(struct ath5k_hw *ah);
1083 extern void ath5k_hw_set_rx_filter(struct ath5k_hw *ah, u32 filter);
1084 /* Beacon related functions */
1085 extern u32 ath5k_hw_get_tsf32(struct ath5k_hw *ah);
1086 extern u64 ath5k_hw_get_tsf64(struct ath5k_hw *ah);
1087 extern void ath5k_hw_reset_tsf(struct ath5k_hw *ah);
1088 extern void ath5k_hw_init_beacon(struct ath5k_hw *ah, u32 next_beacon, u32 interval);
1089 #if 0
1090 extern int ath5k_hw_set_beacon_timers(struct ath5k_hw *ah, const struct ath5k_beacon_state *state);
1091 extern void ath5k_hw_reset_beacon(struct ath5k_hw *ah);
1092 extern int ath5k_hw_beaconq_finish(struct ath5k_hw *ah, unsigned long phys_addr);
1093 #endif
1094 /* ACK bit rate */
1095 void ath5k_hw_set_ack_bitrate_high(struct ath5k_hw *ah, bool high);
1096 /* ACK/CTS Timeouts */
1097 extern int ath5k_hw_set_ack_timeout(struct ath5k_hw *ah, unsigned int timeout);
1098 extern unsigned int ath5k_hw_get_ack_timeout(struct ath5k_hw *ah);
1099 extern int ath5k_hw_set_cts_timeout(struct ath5k_hw *ah, unsigned int timeout);
1100 extern unsigned int ath5k_hw_get_cts_timeout(struct ath5k_hw *ah);
1101 /* Key table (WEP) functions */
1102 extern int ath5k_hw_reset_key(struct ath5k_hw *ah, u16 entry);
1103 extern int ath5k_hw_is_key_valid(struct ath5k_hw *ah, u16 entry);
1104 extern int ath5k_hw_set_key(struct ath5k_hw *ah, u16 entry, const struct ieee80211_key_conf *key, const u8 *mac);
1105 extern int ath5k_hw_set_key_lladdr(struct ath5k_hw *ah, u16 entry, const u8 *mac);
1106 /* Queue Control Unit, DFS Control Unit Functions */
1107 extern int ath5k_hw_setup_tx_queue(struct ath5k_hw *ah, enum ath5k_tx_queue queue_type, struct ath5k_txq_info *queue_info);
1108 extern int ath5k_hw_setup_tx_queueprops(struct ath5k_hw *ah, int queue, const struct ath5k_txq_info *queue_info);
1109 extern int ath5k_hw_get_tx_queueprops(struct ath5k_hw *ah, int queue, struct ath5k_txq_info *queue_info);
1110 extern void ath5k_hw_release_tx_queue(struct ath5k_hw *ah, unsigned int queue);
1111 extern int ath5k_hw_reset_tx_queue(struct ath5k_hw *ah, unsigned int queue);
1112 extern u32 ath5k_hw_num_tx_pending(struct ath5k_hw *ah, unsigned int queue);
1113 extern int ath5k_hw_set_slot_time(struct ath5k_hw *ah, unsigned int slot_time);
1114 extern unsigned int ath5k_hw_get_slot_time(struct ath5k_hw *ah);
1115 /* Hardware Descriptor Functions */
1116 extern int ath5k_hw_setup_rx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc, u32 size, unsigned int flags);
1117 /* GPIO Functions */
1118 extern void ath5k_hw_set_ledstate(struct ath5k_hw *ah, unsigned int state);
1119 extern int ath5k_hw_set_gpio_output(struct ath5k_hw *ah, u32 gpio);
1120 extern int ath5k_hw_set_gpio_input(struct ath5k_hw *ah, u32 gpio);
1121 extern u32 ath5k_hw_get_gpio(struct ath5k_hw *ah, u32 gpio);
1122 extern int ath5k_hw_set_gpio(struct ath5k_hw *ah, u32 gpio, u32 val);
1123 extern void ath5k_hw_set_gpio_intr(struct ath5k_hw *ah, unsigned int gpio, u32 interrupt_level);
1124 /* Misc functions */
1125 extern int ath5k_hw_get_capability(struct ath5k_hw *ah, enum ath5k_capability_type cap_type, u32 capability, u32 *result);
1126
1127
1128 /* Initial register settings functions */
1129 extern int ath5k_hw_write_initvals(struct ath5k_hw *ah, u8 mode, bool change_channel);
1130 /* Initialize RF */
1131 extern int ath5k_hw_rfregs(struct ath5k_hw *ah, struct ieee80211_channel *channel, unsigned int mode);
1132 extern int ath5k_hw_rfgain(struct ath5k_hw *ah, unsigned int freq);
1133 extern enum ath5k_rfgain ath5k_hw_get_rf_gain(struct ath5k_hw *ah);
1134 extern int ath5k_hw_set_rfgain_opt(struct ath5k_hw *ah);
1135
1136
1137 /* PHY/RF channel functions */
1138 extern bool ath5k_channel_ok(struct ath5k_hw *ah, u16 freq, unsigned int flags);
1139 extern int ath5k_hw_channel(struct ath5k_hw *ah, struct ieee80211_channel *channel);
1140 /* PHY calibration */
1141 extern int ath5k_hw_phy_calibrate(struct ath5k_hw *ah, struct ieee80211_channel *channel);
1142 extern int ath5k_hw_phy_disable(struct ath5k_hw *ah);
1143 /* Misc PHY functions */
1144 extern u16 ath5k_hw_radio_revision(struct ath5k_hw *ah, unsigned int chan);
1145 extern void ath5k_hw_set_def_antenna(struct ath5k_hw *ah, unsigned int ant);
1146 extern unsigned int ath5k_hw_get_def_antenna(struct ath5k_hw *ah);
1147 extern int ath5k_hw_noise_floor_calibration(struct ath5k_hw *ah, short freq);
1148 /* TX power setup */
1149 extern int ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel, unsigned int txpower);
1150 extern int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, unsigned int power);
1151
1152
1153 static inline u32 ath5k_hw_reg_read(struct ath5k_hw *ah, u16 reg)
1154 {
1155         return ioread32(ah->ah_iobase + reg);
1156 }
1157
1158 static inline void ath5k_hw_reg_write(struct ath5k_hw *ah, u32 val, u16 reg)
1159 {
1160         iowrite32(val, ah->ah_iobase + reg);
1161 }
1162
1163 #endif