]> www.pilppa.org Git - linux-2.6-omap-h63xx.git/blob - drivers/net/wireless/ath5k/ath5k.h
Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus
[linux-2.6-omap-h63xx.git] / drivers / net / wireless / ath5k / ath5k.h
1 /*
2  * Copyright (c) 2004-2007 Reyk Floeter <reyk@openbsd.org>
3  * Copyright (c) 2006-2007 Nick Kossifidis <mickflemm@gmail.com>
4  *
5  * Permission to use, copy, modify, and distribute this software for any
6  * purpose with or without fee is hereby granted, provided that the above
7  * copyright notice and this permission notice appear in all copies.
8  *
9  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
10  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
11  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
12  * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
13  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
14  * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
15  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
16  */
17
18 #ifndef _ATH5K_H
19 #define _ATH5K_H
20
21 /* Set this to 1 to disable regulatory domain restrictions for channel tests.
22  * WARNING: This is for debuging only and has side effects (eg. scan takes too
23  * long and results timeouts). It's also illegal to tune to some of the
24  * supported frequencies in some countries, so use this at your own risk,
25  * you've been warned. */
26 #define CHAN_DEBUG      0
27
28 #include <linux/io.h>
29 #include <linux/types.h>
30 #include <net/mac80211.h>
31
32 #include "hw.h"
33
34 /* PCI IDs */
35 #define PCI_DEVICE_ID_ATHEROS_AR5210            0x0007 /* AR5210 */
36 #define PCI_DEVICE_ID_ATHEROS_AR5311            0x0011 /* AR5311 */
37 #define PCI_DEVICE_ID_ATHEROS_AR5211            0x0012 /* AR5211 */
38 #define PCI_DEVICE_ID_ATHEROS_AR5212            0x0013 /* AR5212 */
39 #define PCI_DEVICE_ID_3COM_3CRDAG675            0x0013 /* 3CRDAG675 (Atheros AR5212) */
40 #define PCI_DEVICE_ID_3COM_2_3CRPAG175          0x0013 /* 3CRPAG175 (Atheros AR5212) */
41 #define PCI_DEVICE_ID_ATHEROS_AR5210_AP         0x0207 /* AR5210 (Early) */
42 #define PCI_DEVICE_ID_ATHEROS_AR5212_IBM        0x1014 /* AR5212 (IBM MiniPCI) */
43 #define PCI_DEVICE_ID_ATHEROS_AR5210_DEFAULT    0x1107 /* AR5210 (no eeprom) */
44 #define PCI_DEVICE_ID_ATHEROS_AR5212_DEFAULT    0x1113 /* AR5212 (no eeprom) */
45 #define PCI_DEVICE_ID_ATHEROS_AR5211_DEFAULT    0x1112 /* AR5211 (no eeprom) */
46 #define PCI_DEVICE_ID_ATHEROS_AR5212_FPGA       0xf013 /* AR5212 (emulation board) */
47 #define PCI_DEVICE_ID_ATHEROS_AR5211_LEGACY     0xff12 /* AR5211 (emulation board) */
48 #define PCI_DEVICE_ID_ATHEROS_AR5211_FPGA11B    0xf11b /* AR5211 (emulation board) */
49 #define PCI_DEVICE_ID_ATHEROS_AR5312_REV2       0x0052 /* AR5312 WMAC (AP31) */
50 #define PCI_DEVICE_ID_ATHEROS_AR5312_REV7       0x0057 /* AR5312 WMAC (AP30-040) */
51 #define PCI_DEVICE_ID_ATHEROS_AR5312_REV8       0x0058 /* AR5312 WMAC (AP43-030) */
52 #define PCI_DEVICE_ID_ATHEROS_AR5212_0014       0x0014 /* AR5212 compatible */
53 #define PCI_DEVICE_ID_ATHEROS_AR5212_0015       0x0015 /* AR5212 compatible */
54 #define PCI_DEVICE_ID_ATHEROS_AR5212_0016       0x0016 /* AR5212 compatible */
55 #define PCI_DEVICE_ID_ATHEROS_AR5212_0017       0x0017 /* AR5212 compatible */
56 #define PCI_DEVICE_ID_ATHEROS_AR5212_0018       0x0018 /* AR5212 compatible */
57 #define PCI_DEVICE_ID_ATHEROS_AR5212_0019       0x0019 /* AR5212 compatible */
58 #define PCI_DEVICE_ID_ATHEROS_AR2413            0x001a /* AR2413 (Griffin-lite) */
59 #define PCI_DEVICE_ID_ATHEROS_AR5413            0x001b /* AR5413 (Eagle) */
60 #define PCI_DEVICE_ID_ATHEROS_AR5424            0x001c /* AR5424 (Condor PCI-E) */
61 #define PCI_DEVICE_ID_ATHEROS_AR5416            0x0023 /* AR5416 */
62 #define PCI_DEVICE_ID_ATHEROS_AR5418            0x0024 /* AR5418 */
63
64 /****************************\
65   GENERIC DRIVER DEFINITIONS
66 \****************************/
67
68 #define ATH5K_PRINTF(fmt, ...)   printk("%s: " fmt, __func__, ##__VA_ARGS__)
69
70 #define ATH5K_PRINTK(_sc, _level, _fmt, ...) \
71         printk(_level "ath5k %s: " _fmt, \
72                 ((_sc) && (_sc)->hw) ? wiphy_name((_sc)->hw->wiphy) : "", \
73                 ##__VA_ARGS__)
74
75 #define ATH5K_PRINTK_LIMIT(_sc, _level, _fmt, ...) do { \
76         if (net_ratelimit()) \
77                 ATH5K_PRINTK(_sc, _level, _fmt, ##__VA_ARGS__); \
78         } while (0)
79
80 #define ATH5K_INFO(_sc, _fmt, ...) \
81         ATH5K_PRINTK(_sc, KERN_INFO, _fmt, ##__VA_ARGS__)
82
83 #define ATH5K_WARN(_sc, _fmt, ...) \
84         ATH5K_PRINTK_LIMIT(_sc, KERN_WARNING, _fmt, ##__VA_ARGS__)
85
86 #define ATH5K_ERR(_sc, _fmt, ...) \
87         ATH5K_PRINTK_LIMIT(_sc, KERN_ERR, _fmt, ##__VA_ARGS__)
88
89 /*
90  * Some tuneable values (these should be changeable by the user)
91  */
92 #define AR5K_TUNE_DMA_BEACON_RESP               2
93 #define AR5K_TUNE_SW_BEACON_RESP                10
94 #define AR5K_TUNE_ADDITIONAL_SWBA_BACKOFF       0
95 #define AR5K_TUNE_RADAR_ALERT                   false
96 #define AR5K_TUNE_MIN_TX_FIFO_THRES             1
97 #define AR5K_TUNE_MAX_TX_FIFO_THRES             ((IEEE80211_MAX_LEN / 64) + 1)
98 #define AR5K_TUNE_REGISTER_TIMEOUT              20000
99 /* Register for RSSI threshold has a mask of 0xff, so 255 seems to
100  * be the max value. */
101 #define AR5K_TUNE_RSSI_THRES                   129
102 /* This must be set when setting the RSSI threshold otherwise it can
103  * prevent a reset. If AR5K_RSSI_THR is read after writing to it
104  * the BMISS_THRES will be seen as 0, seems harware doesn't keep
105  * track of it. Max value depends on harware. For AR5210 this is just 7.
106  * For AR5211+ this seems to be up to 255. */
107 #define AR5K_TUNE_BMISS_THRES                  7
108 #define AR5K_TUNE_REGISTER_DWELL_TIME           20000
109 #define AR5K_TUNE_BEACON_INTERVAL               100
110 #define AR5K_TUNE_AIFS                          2
111 #define AR5K_TUNE_AIFS_11B                      2
112 #define AR5K_TUNE_AIFS_XR                       0
113 #define AR5K_TUNE_CWMIN                         15
114 #define AR5K_TUNE_CWMIN_11B                     31
115 #define AR5K_TUNE_CWMIN_XR                      3
116 #define AR5K_TUNE_CWMAX                         1023
117 #define AR5K_TUNE_CWMAX_11B                     1023
118 #define AR5K_TUNE_CWMAX_XR                      7
119 #define AR5K_TUNE_NOISE_FLOOR                   -72
120 #define AR5K_TUNE_MAX_TXPOWER                   60
121 #define AR5K_TUNE_DEFAULT_TXPOWER               30
122 #define AR5K_TUNE_TPC_TXPOWER                   true
123 #define AR5K_TUNE_ANT_DIVERSITY                 true
124 #define AR5K_TUNE_HWTXTRIES                     4
125
126 /* token to use for aifs, cwmin, cwmax in MadWiFi */
127 #define AR5K_TXQ_USEDEFAULT     ((u32) -1)
128
129 /* GENERIC CHIPSET DEFINITIONS */
130
131 /* MAC Chips */
132 enum ath5k_version {
133         AR5K_AR5210     = 0,
134         AR5K_AR5211     = 1,
135         AR5K_AR5212     = 2,
136 };
137
138 /* PHY Chips */
139 enum ath5k_radio {
140         AR5K_RF5110     = 0,
141         AR5K_RF5111     = 1,
142         AR5K_RF5112     = 2,
143         AR5K_RF2413     = 3,
144         AR5K_RF5413     = 4,
145         AR5K_RF2425     = 5,
146 };
147
148 /*
149  * Common silicon revision/version values
150  */
151
152 enum ath5k_srev_type {
153         AR5K_VERSION_VER,
154         AR5K_VERSION_RAD,
155 };
156
157 struct ath5k_srev_name {
158         const char              *sr_name;
159         enum ath5k_srev_type    sr_type;
160         u_int                   sr_val;
161 };
162
163 #define AR5K_SREV_UNKNOWN       0xffff
164
165 #define AR5K_SREV_VER_AR5210    0x00
166 #define AR5K_SREV_VER_AR5311    0x10
167 #define AR5K_SREV_VER_AR5311A   0x20
168 #define AR5K_SREV_VER_AR5311B   0x30
169 #define AR5K_SREV_VER_AR5211    0x40
170 #define AR5K_SREV_VER_AR5212    0x50
171 #define AR5K_SREV_VER_AR5213    0x55
172 #define AR5K_SREV_VER_AR5213A   0x59
173 #define AR5K_SREV_VER_AR2413    0x78
174 #define AR5K_SREV_VER_AR2414    0x79
175 #define AR5K_SREV_VER_AR2424    0xa0 /* PCI-E */
176 #define AR5K_SREV_VER_AR5424    0xa3 /* PCI-E */
177 #define AR5K_SREV_VER_AR5413    0xa4
178 #define AR5K_SREV_VER_AR5414    0xa5
179 #define AR5K_SREV_VER_AR5416    0xc0 /* PCI-E */
180 #define AR5K_SREV_VER_AR5418    0xca /* PCI-E */
181 #define AR5K_SREV_VER_AR2425    0xe2 /* PCI-E */
182
183 #define AR5K_SREV_RAD_5110      0x00
184 #define AR5K_SREV_RAD_5111      0x10
185 #define AR5K_SREV_RAD_5111A     0x15
186 #define AR5K_SREV_RAD_2111      0x20
187 #define AR5K_SREV_RAD_5112      0x30
188 #define AR5K_SREV_RAD_5112A     0x35
189 #define AR5K_SREV_RAD_5112B     0x36
190 #define AR5K_SREV_RAD_2112      0x40
191 #define AR5K_SREV_RAD_2112A     0x45
192 #define AR5K_SREV_RAD_2112B     0x46
193 #define AR5K_SREV_RAD_SC0       0x50    /* Found on 2413/2414 */
194 #define AR5K_SREV_RAD_SC1       0x60    /* Found on 5413/5414 */
195 #define AR5K_SREV_RAD_SC2       0xa0    /* Found on 2424-5/5424 */
196 #define AR5K_SREV_RAD_5133      0xc0    /* MIMO found on 5418 */
197
198 /* IEEE defs */
199
200 #define IEEE80211_MAX_LEN       2500
201
202 /* TODO add support to mac80211 for vendor-specific rates and modes */
203
204 /*
205  * Some of this information is based on Documentation from:
206  *
207  * http://madwifi.org/wiki/ChipsetFeatures/SuperAG
208  *
209  * Modulation for Atheros' eXtended Range - range enhancing extension that is
210  * supposed to double the distance an Atheros client device can keep a
211  * connection with an Atheros access point. This is achieved by increasing
212  * the receiver sensitivity up to, -105dBm, which is about 20dB above what
213  * the 802.11 specifications demand. In addition, new (proprietary) data rates
214  * are introduced: 3, 2, 1, 0.5 and 0.25 MBit/s.
215  *
216  * Please note that can you either use XR or TURBO but you cannot use both,
217  * they are exclusive.
218  *
219  */
220 #define MODULATION_XR           0x00000200
221 /*
222  * Modulation for Atheros' Turbo G and Turbo A, its supposed to provide a
223  * throughput transmission speed up to 40Mbit/s-60Mbit/s at a 108Mbit/s
224  * signaling rate achieved through the bonding of two 54Mbit/s 802.11g
225  * channels. To use this feature your Access Point must also suport it.
226  * There is also a distinction between "static" and "dynamic" turbo modes:
227  *
228  * - Static: is the dumb version: devices set to this mode stick to it until
229  *     the mode is turned off.
230  * - Dynamic: is the intelligent version, the network decides itself if it
231  *     is ok to use turbo. As soon as traffic is detected on adjacent channels
232  *     (which would get used in turbo mode), or when a non-turbo station joins
233  *     the network, turbo mode won't be used until the situation changes again.
234  *     Dynamic mode is achieved by Atheros' Adaptive Radio (AR) feature which
235  *     monitors the used radio band in order to decide whether turbo mode may
236  *     be used or not.
237  *
238  * This article claims Super G sticks to bonding of channels 5 and 6 for
239  * USA:
240  *
241  * http://www.pcworld.com/article/id,113428-page,1/article.html
242  *
243  * The channel bonding seems to be driver specific though. In addition to
244  * deciding what channels will be used, these "Turbo" modes are accomplished
245  * by also enabling the following features:
246  *
247  * - Bursting: allows multiple frames to be sent at once, rather than pausing
248  *     after each frame. Bursting is a standards-compliant feature that can be
249  *     used with any Access Point.
250  * - Fast frames: increases the amount of information that can be sent per
251  *     frame, also resulting in a reduction of transmission overhead. It is a
252  *     proprietary feature that needs to be supported by the Access Point.
253  * - Compression: data frames are compressed in real time using a Lempel Ziv
254  *     algorithm. This is done transparently. Once this feature is enabled,
255  *     compression and decompression takes place inside the chipset, without
256  *     putting additional load on the host CPU.
257  *
258  */
259 #define MODULATION_TURBO        0x00000080
260
261 enum ath5k_driver_mode {
262         AR5K_MODE_11A           =       0,
263         AR5K_MODE_11A_TURBO     =       1,
264         AR5K_MODE_11B           =       2,
265         AR5K_MODE_11G           =       3,
266         AR5K_MODE_11G_TURBO     =       4,
267         AR5K_MODE_XR            =       0,
268         AR5K_MODE_MAX           =       5
269 };
270
271 /* adding this flag to rate_code enables short preamble, see ar5212_reg.h */
272 #define AR5K_SET_SHORT_PREAMBLE 0x04
273
274 #define HAS_SHPREAMBLE(_ix) \
275         (rt->rates[_ix].modulation == IEEE80211_RATE_SHORT_PREAMBLE)
276 #define SHPREAMBLE_FLAG(_ix) \
277         (HAS_SHPREAMBLE(_ix) ? AR5K_SET_SHORT_PREAMBLE : 0)
278
279
280 /****************\
281   TX DEFINITIONS
282 \****************/
283
284 /*
285  * TX Status
286  */
287 struct ath5k_tx_status {
288         u16     ts_seqnum;
289         u16     ts_tstamp;
290         u8      ts_status;
291         u8      ts_rate;
292         s8      ts_rssi;
293         u8      ts_shortretry;
294         u8      ts_longretry;
295         u8      ts_virtcol;
296         u8      ts_antenna;
297 };
298
299 #define AR5K_TXSTAT_ALTRATE     0x80
300 #define AR5K_TXERR_XRETRY       0x01
301 #define AR5K_TXERR_FILT         0x02
302 #define AR5K_TXERR_FIFO         0x04
303
304 /**
305  * enum ath5k_tx_queue - Queue types used to classify tx queues.
306  * @AR5K_TX_QUEUE_INACTIVE: q is unused -- see ath5k_hw_release_tx_queue
307  * @AR5K_TX_QUEUE_DATA: A normal data queue
308  * @AR5K_TX_QUEUE_XR_DATA: An XR-data queue
309  * @AR5K_TX_QUEUE_BEACON: The beacon queue
310  * @AR5K_TX_QUEUE_CAB: The after-beacon queue
311  * @AR5K_TX_QUEUE_UAPSD: Unscheduled Automatic Power Save Delivery queue
312  */
313 enum ath5k_tx_queue {
314         AR5K_TX_QUEUE_INACTIVE = 0,
315         AR5K_TX_QUEUE_DATA,
316         AR5K_TX_QUEUE_XR_DATA,
317         AR5K_TX_QUEUE_BEACON,
318         AR5K_TX_QUEUE_CAB,
319         AR5K_TX_QUEUE_UAPSD,
320 };
321
322 #define AR5K_NUM_TX_QUEUES              10
323 #define AR5K_NUM_TX_QUEUES_NOQCU        2
324
325 /*
326  * Queue syb-types to classify normal data queues.
327  * These are the 4 Access Categories as defined in
328  * WME spec. 0 is the lowest priority and 4 is the
329  * highest. Normal data that hasn't been classified
330  * goes to the Best Effort AC.
331  */
332 enum ath5k_tx_queue_subtype {
333         AR5K_WME_AC_BK = 0,     /*Background traffic*/
334         AR5K_WME_AC_BE,         /*Best-effort (normal) traffic)*/
335         AR5K_WME_AC_VI,         /*Video traffic*/
336         AR5K_WME_AC_VO,         /*Voice traffic*/
337 };
338
339 /*
340  * Queue ID numbers as returned by the hw functions, each number
341  * represents a hw queue. If hw does not support hw queues
342  * (eg 5210) all data goes in one queue. These match
343  * d80211 definitions (net80211/MadWiFi don't use them).
344  */
345 enum ath5k_tx_queue_id {
346         AR5K_TX_QUEUE_ID_NOQCU_DATA     = 0,
347         AR5K_TX_QUEUE_ID_NOQCU_BEACON   = 1,
348         AR5K_TX_QUEUE_ID_DATA_MIN       = 0, /*IEEE80211_TX_QUEUE_DATA0*/
349         AR5K_TX_QUEUE_ID_DATA_MAX       = 4, /*IEEE80211_TX_QUEUE_DATA4*/
350         AR5K_TX_QUEUE_ID_DATA_SVP       = 5, /*IEEE80211_TX_QUEUE_SVP - Spectralink Voice Protocol*/
351         AR5K_TX_QUEUE_ID_CAB            = 6, /*IEEE80211_TX_QUEUE_AFTER_BEACON*/
352         AR5K_TX_QUEUE_ID_BEACON         = 7, /*IEEE80211_TX_QUEUE_BEACON*/
353         AR5K_TX_QUEUE_ID_UAPSD          = 8,
354         AR5K_TX_QUEUE_ID_XR_DATA        = 9,
355 };
356
357
358 /*
359  * Flags to set hw queue's parameters...
360  */
361 #define AR5K_TXQ_FLAG_TXOKINT_ENABLE            0x0001  /* Enable TXOK interrupt */
362 #define AR5K_TXQ_FLAG_TXERRINT_ENABLE           0x0002  /* Enable TXERR interrupt */
363 #define AR5K_TXQ_FLAG_TXEOLINT_ENABLE           0x0004  /* Enable TXEOL interrupt -not used- */
364 #define AR5K_TXQ_FLAG_TXDESCINT_ENABLE          0x0008  /* Enable TXDESC interrupt -not used- */
365 #define AR5K_TXQ_FLAG_TXURNINT_ENABLE           0x0010  /* Enable TXURN interrupt */
366 #define AR5K_TXQ_FLAG_BACKOFF_DISABLE           0x0020  /* Disable random post-backoff */
367 #define AR5K_TXQ_FLAG_RDYTIME_EXP_POLICY_ENABLE 0x0040  /* Enable ready time expiry policy (?)*/
368 #define AR5K_TXQ_FLAG_FRAG_BURST_BACKOFF_ENABLE 0x0080  /* Enable backoff while bursting */
369 #define AR5K_TXQ_FLAG_POST_FR_BKOFF_DIS         0x0100  /* Disable backoff while bursting */
370 #define AR5K_TXQ_FLAG_COMPRESSION_ENABLE        0x0200  /* Enable hw compression -not implemented-*/
371
372 /*
373  * A struct to hold tx queue's parameters
374  */
375 struct ath5k_txq_info {
376         enum ath5k_tx_queue tqi_type;
377         enum ath5k_tx_queue_subtype tqi_subtype;
378         u16     tqi_flags;      /* Tx queue flags (see above) */
379         u32     tqi_aifs;       /* Arbitrated Interframe Space */
380         s32     tqi_cw_min;     /* Minimum Contention Window */
381         s32     tqi_cw_max;     /* Maximum Contention Window */
382         u32     tqi_cbr_period; /* Constant bit rate period */
383         u32     tqi_cbr_overflow_limit;
384         u32     tqi_burst_time;
385         u32     tqi_ready_time; /* Not used */
386 };
387
388 /*
389  * Transmit packet types.
390  * These are not fully used inside OpenHAL yet
391  */
392 enum ath5k_pkt_type {
393         AR5K_PKT_TYPE_NORMAL            = 0,
394         AR5K_PKT_TYPE_ATIM              = 1,
395         AR5K_PKT_TYPE_PSPOLL            = 2,
396         AR5K_PKT_TYPE_BEACON            = 3,
397         AR5K_PKT_TYPE_PROBE_RESP        = 4,
398         AR5K_PKT_TYPE_PIFS              = 5,
399 };
400
401 /*
402  * TX power and TPC settings
403  */
404 #define AR5K_TXPOWER_OFDM(_r, _v)       (                       \
405         ((0 & 1) << ((_v) + 6)) |                               \
406         (((ah->ah_txpower.txp_rates[(_r)]) & 0x3f) << (_v))     \
407 )
408
409 #define AR5K_TXPOWER_CCK(_r, _v)        (                       \
410         (ah->ah_txpower.txp_rates[(_r)] & 0x3f) << (_v) \
411 )
412
413 /*
414  * DMA size definitions (2^n+2)
415  */
416 enum ath5k_dmasize {
417         AR5K_DMASIZE_4B = 0,
418         AR5K_DMASIZE_8B,
419         AR5K_DMASIZE_16B,
420         AR5K_DMASIZE_32B,
421         AR5K_DMASIZE_64B,
422         AR5K_DMASIZE_128B,
423         AR5K_DMASIZE_256B,
424         AR5K_DMASIZE_512B
425 };
426
427
428 /****************\
429   RX DEFINITIONS
430 \****************/
431
432 /*
433  * RX Status
434  */
435 struct ath5k_rx_status {
436         u16     rs_datalen;
437         u16     rs_tstamp;
438         u8      rs_status;
439         u8      rs_phyerr;
440         s8      rs_rssi;
441         u8      rs_keyix;
442         u8      rs_rate;
443         u8      rs_antenna;
444         u8      rs_more;
445 };
446
447 #define AR5K_RXERR_CRC          0x01
448 #define AR5K_RXERR_PHY          0x02
449 #define AR5K_RXERR_FIFO         0x04
450 #define AR5K_RXERR_DECRYPT      0x08
451 #define AR5K_RXERR_MIC          0x10
452 #define AR5K_RXKEYIX_INVALID    ((u8) - 1)
453 #define AR5K_TXKEYIX_INVALID    ((u32) - 1)
454
455
456 /**************************\
457  BEACON TIMERS DEFINITIONS
458 \**************************/
459
460 #define AR5K_BEACON_PERIOD      0x0000ffff
461 #define AR5K_BEACON_ENA         0x00800000 /*enable beacon xmit*/
462 #define AR5K_BEACON_RESET_TSF   0x01000000 /*force a TSF reset*/
463
464 #if 0
465 /**
466  * struct ath5k_beacon_state - Per-station beacon timer state.
467  * @bs_interval: in TU's, can also include the above flags
468  * @bs_cfp_max_duration: if non-zero hw is setup to coexist with a
469  *      Point Coordination Function capable AP
470  */
471 struct ath5k_beacon_state {
472         u32     bs_next_beacon;
473         u32     bs_next_dtim;
474         u32     bs_interval;
475         u8      bs_dtim_period;
476         u8      bs_cfp_period;
477         u16     bs_cfp_max_duration;
478         u16     bs_cfp_du_remain;
479         u16     bs_tim_offset;
480         u16     bs_sleep_duration;
481         u16     bs_bmiss_threshold;
482         u32     bs_cfp_next;
483 };
484 #endif
485
486
487 /*
488  * TSF to TU conversion:
489  *
490  * TSF is a 64bit value in usec (microseconds).
491  * TU is a 32bit value and defined by IEEE802.11 (page 6) as "A measurement of
492  * time equal to 1024 usec", so it's roughly milliseconds (usec / 1024).
493  */
494 #define TSF_TO_TU(_tsf) (u32)((_tsf) >> 10)
495
496
497 /********************\
498   COMMON DEFINITIONS
499 \********************/
500
501 /*
502  * Atheros hardware descriptor
503  * This is read and written to by the hardware
504  */
505 struct ath5k_desc {
506         u32     ds_link;        /* physical address of the next descriptor */
507         u32     ds_data;        /* physical address of data buffer (skb) */
508
509         union {
510                 struct ath5k_hw_5210_tx_desc    ds_tx5210;
511                 struct ath5k_hw_5212_tx_desc    ds_tx5212;
512                 struct ath5k_hw_all_rx_desc     ds_rx;
513         } ud;
514 } __packed;
515
516 #define AR5K_RXDESC_INTREQ      0x0020
517
518 #define AR5K_TXDESC_CLRDMASK    0x0001
519 #define AR5K_TXDESC_NOACK       0x0002  /*[5211+]*/
520 #define AR5K_TXDESC_RTSENA      0x0004
521 #define AR5K_TXDESC_CTSENA      0x0008
522 #define AR5K_TXDESC_INTREQ      0x0010
523 #define AR5K_TXDESC_VEOL        0x0020  /*[5211+]*/
524
525 #define AR5K_SLOT_TIME_9        396
526 #define AR5K_SLOT_TIME_20       880
527 #define AR5K_SLOT_TIME_MAX      0xffff
528
529 /* channel_flags */
530 #define CHANNEL_CW_INT  0x0008  /* Contention Window interference detected */
531 #define CHANNEL_TURBO   0x0010  /* Turbo Channel */
532 #define CHANNEL_CCK     0x0020  /* CCK channel */
533 #define CHANNEL_OFDM    0x0040  /* OFDM channel */
534 #define CHANNEL_2GHZ    0x0080  /* 2GHz channel. */
535 #define CHANNEL_5GHZ    0x0100  /* 5GHz channel */
536 #define CHANNEL_PASSIVE 0x0200  /* Only passive scan allowed */
537 #define CHANNEL_DYN     0x0400  /* Dynamic CCK-OFDM channel (for g operation) */
538 #define CHANNEL_XR      0x0800  /* XR channel */
539
540 #define CHANNEL_A       (CHANNEL_5GHZ|CHANNEL_OFDM)
541 #define CHANNEL_B       (CHANNEL_2GHZ|CHANNEL_CCK)
542 #define CHANNEL_G       (CHANNEL_2GHZ|CHANNEL_OFDM)
543 #define CHANNEL_T       (CHANNEL_5GHZ|CHANNEL_OFDM|CHANNEL_TURBO)
544 #define CHANNEL_TG      (CHANNEL_2GHZ|CHANNEL_OFDM|CHANNEL_TURBO)
545 #define CHANNEL_108A    CHANNEL_T
546 #define CHANNEL_108G    CHANNEL_TG
547 #define CHANNEL_X       (CHANNEL_5GHZ|CHANNEL_OFDM|CHANNEL_XR)
548
549 #define CHANNEL_ALL     (CHANNEL_OFDM|CHANNEL_CCK|CHANNEL_2GHZ|CHANNEL_5GHZ| \
550                 CHANNEL_TURBO)
551
552 #define CHANNEL_ALL_NOTURBO     (CHANNEL_ALL & ~CHANNEL_TURBO)
553 #define CHANNEL_MODES           CHANNEL_ALL
554
555 /*
556  * Used internaly in OpenHAL (ar5211.c/ar5212.c
557  * for reset_tx_queue). Also see struct struct ieee80211_channel.
558  */
559 #define IS_CHAN_XR(_c)  ((_c.hw_value & CHANNEL_XR) != 0)
560 #define IS_CHAN_B(_c)   ((_c.hw_value & CHANNEL_B) != 0)
561
562 /*
563  * The following structure will be used to map 2GHz channels to
564  * 5GHz Atheros channels.
565  */
566 struct ath5k_athchan_2ghz {
567         u32     a2_flags;
568         u16     a2_athchan;
569 };
570
571 /*
572  * Rate definitions
573  * TODO: Clean them up or move them on mac80211 -most of these infos are
574  *       used by the rate control algorytm on MadWiFi.
575  */
576
577 /* Max number of rates on the rate table and what it seems
578  * Atheros hardware supports */
579 #define AR5K_MAX_RATES 32
580
581 /**
582  * struct ath5k_rate - rate structure
583  * @valid: is this a valid rate for rate control (remove)
584  * @modulation: respective mac80211 modulation
585  * @rate_kbps: rate in kbit/s
586  * @rate_code: hardware rate value, used in &struct ath5k_desc, on RX on
587  *     &struct ath5k_rx_status.rs_rate and on TX on
588  *     &struct ath5k_tx_status.ts_rate. Seems the ar5xxx harware supports
589  *     up to 32 rates, indexed by 1-32. This means we really only need
590  *     6 bits for the rate_code.
591  * @dot11_rate: respective IEEE-802.11 rate value
592  * @control_rate: index of rate assumed to be used to send control frames.
593  *     This can be used to set override the value on the rate duration
594  *     registers. This is only useful if we can override in the harware at
595  *     what rate we want to send control frames at. Note that IEEE-802.11
596  *     Ch. 9.6 (after IEEE 802.11g changes) defines the rate at which we
597  *     should send ACK/CTS, if we change this value we can be breaking
598  *     the spec.
599  *
600  * This structure is used to get the RX rate or set the TX rate on the
601  * hardware descriptors. It is also used for internal modulation control
602  * and settings.
603  *
604  * On RX after the &struct ath5k_desc is parsed by the appropriate
605  * ah_proc_rx_desc() the respective hardware rate value is set in
606  * &struct ath5k_rx_status.rs_rate. On TX the desired rate is set in
607  * &struct ath5k_tx_status.ts_rate which is later used to setup the
608  * &struct ath5k_desc correctly. This is the hardware rate map we are
609  * aware of:
610  *
611  * rate_code   1       2       3       4       5       6       7       8
612  * rate_kbps   3000    1000    ?       ?       ?       2000    500     48000
613  *
614  * rate_code   9       10      11      12      13      14      15      16
615  * rate_kbps   24000   12000   6000    54000   36000   18000   9000    ?
616  *
617  * rate_code   17      18      19      20      21      22      23      24
618  * rate_kbps   ?       ?       ?       ?       ?       ?       ?       11000
619  *
620  * rate_code   25      26      27      28      29      30      31      32
621  * rate_kbps   5500    2000    1000    ?       ?       ?       ?       ?
622  *
623  */
624 struct ath5k_rate {
625         u8      valid;
626         u32     modulation;
627         u16     rate_kbps;
628         u8      rate_code;
629         u8      dot11_rate;
630         u8      control_rate;
631 };
632
633 /* XXX: GRR all this stuff to get leds blinking ??? (check out setcurmode) */
634 struct ath5k_rate_table {
635         u16     rate_count;
636         u8      rate_code_to_index[AR5K_MAX_RATES];     /* Back-mapping */
637         struct ath5k_rate rates[AR5K_MAX_RATES];
638 };
639
640 /*
641  * Rate tables...
642  * TODO: CLEAN THIS !!!
643  */
644 #define AR5K_RATES_11A { 8, {                                   \
645         255, 255, 255, 255, 255, 255, 255, 255, 6, 4, 2, 0,     \
646         7, 5, 3, 1, 255, 255, 255, 255, 255, 255, 255, 255,     \
647         255, 255, 255, 255, 255, 255, 255, 255 }, {             \
648         { 1, 0, 6000, 11, 140, 0 },             \
649         { 1, 0, 9000, 15, 18, 0 },              \
650         { 1, 0, 12000, 10, 152, 2 },            \
651         { 1, 0, 18000, 14, 36, 2 },             \
652         { 1, 0, 24000, 9, 176, 4 },             \
653         { 1, 0, 36000, 13, 72, 4 },             \
654         { 1, 0, 48000, 8, 96, 4 },              \
655         { 1, 0, 54000, 12, 108, 4 } }           \
656 }
657
658 #define AR5K_RATES_11B { 4, {                                           \
659         255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255,     \
660         255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255,     \
661         3, 2, 1, 0, 255, 255, 255, 255 }, {                             \
662         { 1, 0, 1000, 27, 130, 0 },     \
663         { 1, IEEE80211_RATE_SHORT_PREAMBLE, 2000, 26, 132, 1 }, \
664         { 1, IEEE80211_RATE_SHORT_PREAMBLE, 5500, 25, 139, 1 }, \
665         { 1, IEEE80211_RATE_SHORT_PREAMBLE, 11000, 24, 150, 1 } }       \
666 }
667
668 #define AR5K_RATES_11G { 12, {                                  \
669         255, 255, 255, 255, 255, 255, 255, 255, 10, 8, 6, 4,    \
670         11, 9, 7, 5, 255, 255, 255, 255, 255, 255, 255, 255,    \
671         3, 2, 1, 0, 255, 255, 255, 255 }, {                     \
672         { 1, 0, 1000, 27, 2, 0 },               \
673         { 1, IEEE80211_RATE_SHORT_PREAMBLE, 2000, 26, 4, 1 },           \
674         { 1, IEEE80211_RATE_SHORT_PREAMBLE, 5500, 25, 11, 1 },          \
675         { 1, IEEE80211_RATE_SHORT_PREAMBLE, 11000, 24, 22, 1 }, \
676         { 0, 0, 6000, 11, 12, 4 },      \
677         { 0, 0, 9000, 15, 18, 4 },      \
678         { 1, 0, 12000, 10, 24, 6 },     \
679         { 1, 0, 18000, 14, 36, 6 },     \
680         { 1, 0, 24000, 9, 48, 8 },      \
681         { 1, 0, 36000, 13, 72, 8 },     \
682         { 1, 0, 48000, 8, 96, 8 },      \
683         { 1, 0, 54000, 12, 108, 8 } }   \
684 }
685
686 #define AR5K_RATES_TURBO { 8, {                                 \
687         255, 255, 255, 255, 255, 255, 255, 255, 6, 4, 2, 0,     \
688         7, 5, 3, 1, 255, 255, 255, 255, 255, 255, 255, 255,     \
689         255, 255, 255, 255, 255, 255, 255, 255 }, {             \
690         { 1, MODULATION_TURBO, 6000, 11, 140, 0 },      \
691         { 1, MODULATION_TURBO, 9000, 15, 18, 0 },       \
692         { 1, MODULATION_TURBO, 12000, 10, 152, 2 },     \
693         { 1, MODULATION_TURBO, 18000, 14, 36, 2 },      \
694         { 1, MODULATION_TURBO, 24000, 9, 176, 4 },      \
695         { 1, MODULATION_TURBO, 36000, 13, 72, 4 },      \
696         { 1, MODULATION_TURBO, 48000, 8, 96, 4 },       \
697         { 1, MODULATION_TURBO, 54000, 12, 108, 4 } }    \
698 }
699
700 #define AR5K_RATES_XR { 12, {                                   \
701         255, 3, 1, 255, 255, 255, 2, 0, 10, 8, 6, 4,            \
702         11, 9, 7, 5, 255, 255, 255, 255, 255, 255, 255, 255,    \
703         255, 255, 255, 255, 255, 255, 255, 255 }, {             \
704         { 1, MODULATION_XR, 500, 7, 129, 0 },           \
705         { 1, MODULATION_XR, 1000, 2, 139, 1 },          \
706         { 1, MODULATION_XR, 2000, 6, 150, 2 },          \
707         { 1, MODULATION_XR, 3000, 1, 150, 3 },          \
708         { 1, 0, 6000, 11, 140, 4 },     \
709         { 1, 0, 9000, 15, 18, 4 },      \
710         { 1, 0, 12000, 10, 152, 6 },    \
711         { 1, 0, 18000, 14, 36, 6 },     \
712         { 1, 0, 24000, 9, 176, 8 },     \
713         { 1, 0, 36000, 13, 72, 8 },     \
714         { 1, 0, 48000, 8, 96, 8 },      \
715         { 1, 0, 54000, 12, 108, 8 } }   \
716 }
717
718 /*
719  * Crypto definitions
720  */
721
722 #define AR5K_KEYCACHE_SIZE      8
723
724 /***********************\
725  HW RELATED DEFINITIONS
726 \***********************/
727
728 /*
729  * Misc definitions
730  */
731 #define AR5K_RSSI_EP_MULTIPLIER (1<<7)
732
733 #define AR5K_ASSERT_ENTRY(_e, _s) do {          \
734         if (_e >= _s)                           \
735                 return (false);                 \
736 } while (0)
737
738
739 enum ath5k_ant_setting {
740         AR5K_ANT_VARIABLE       = 0,    /* variable by programming */
741         AR5K_ANT_FIXED_A        = 1,    /* fixed to 11a frequencies */
742         AR5K_ANT_FIXED_B        = 2,    /* fixed to 11b frequencies */
743         AR5K_ANT_MAX            = 3,
744 };
745
746 /*
747  * Hardware interrupt abstraction
748  */
749
750 /**
751  * enum ath5k_int - Hardware interrupt masks helpers
752  *
753  * @AR5K_INT_RX: mask to identify received frame interrupts, of type
754  *      AR5K_ISR_RXOK or AR5K_ISR_RXERR
755  * @AR5K_INT_RXDESC: Request RX descriptor/Read RX descriptor (?)
756  * @AR5K_INT_RXNOFRM: No frame received (?)
757  * @AR5K_INT_RXEOL: received End Of List for VEOL (Virtual End Of List). The
758  *      Queue Control Unit (QCU) signals an EOL interrupt only if a descriptor's
759  *      LinkPtr is NULL. For more details, refer to:
760  *      http://www.freepatentsonline.com/20030225739.html
761  * @AR5K_INT_RXORN: Indicates we got RX overrun (eg. no more descriptors).
762  *      Note that Rx overrun is not always fatal, on some chips we can continue
763  *      operation without reseting the card, that's why int_fatal is not
764  *      common for all chips.
765  * @AR5K_INT_TX: mask to identify received frame interrupts, of type
766  *      AR5K_ISR_TXOK or AR5K_ISR_TXERR
767  * @AR5K_INT_TXDESC: Request TX descriptor/Read TX status descriptor (?)
768  * @AR5K_INT_TXURN: received when we should increase the TX trigger threshold
769  *      We currently do increments on interrupt by
770  *      (AR5K_TUNE_MAX_TX_FIFO_THRES - current_trigger_level) / 2
771  * @AR5K_INT_MIB: Indicates the Management Information Base counters should be
772  *      checked. We should do this with ath5k_hw_update_mib_counters() but
773  *      it seems we should also then do some noise immunity work.
774  * @AR5K_INT_RXPHY: RX PHY Error
775  * @AR5K_INT_RXKCM: ??
776  * @AR5K_INT_SWBA: SoftWare Beacon Alert - indicates its time to send a
777  *      beacon that must be handled in software. The alternative is if you
778  *      have VEOL support, in that case you let the hardware deal with things.
779  * @AR5K_INT_BMISS: If in STA mode this indicates we have stopped seeing
780  *      beacons from the AP have associated with, we should probably try to
781  *      reassociate. When in IBSS mode this might mean we have not received
782  *      any beacons from any local stations. Note that every station in an
783  *      IBSS schedules to send beacons at the Target Beacon Transmission Time
784  *      (TBTT) with a random backoff.
785  * @AR5K_INT_BNR: Beacon Not Ready interrupt - ??
786  * @AR5K_INT_GPIO: GPIO interrupt is used for RF Kill, disabled for now
787  *      until properly handled
788  * @AR5K_INT_FATAL: Fatal errors were encountered, typically caused by DMA
789  *      errors. These types of errors we can enable seem to be of type
790  *      AR5K_SIMR2_MCABT, AR5K_SIMR2_SSERR and AR5K_SIMR2_DPERR.
791  * @AR5K_INT_GLOBAL: Seems to be used to clear and set the IER
792  * @AR5K_INT_NOCARD: signals the card has been removed
793  * @AR5K_INT_COMMON: common interrupts shared amogst MACs with the same
794  *      bit value
795  *
796  * These are mapped to take advantage of some common bits
797  * between the MACs, to be able to set intr properties
798  * easier. Some of them are not used yet inside hw.c. Most map
799  * to the respective hw interrupt value as they are common amogst different
800  * MACs.
801  */
802 enum ath5k_int {
803         AR5K_INT_RX     = 0x00000001, /* Not common */
804         AR5K_INT_RXDESC = 0x00000002,
805         AR5K_INT_RXNOFRM = 0x00000008,
806         AR5K_INT_RXEOL  = 0x00000010,
807         AR5K_INT_RXORN  = 0x00000020,
808         AR5K_INT_TX     = 0x00000040, /* Not common */
809         AR5K_INT_TXDESC = 0x00000080,
810         AR5K_INT_TXURN  = 0x00000800,
811         AR5K_INT_MIB    = 0x00001000,
812         AR5K_INT_RXPHY  = 0x00004000,
813         AR5K_INT_RXKCM  = 0x00008000,
814         AR5K_INT_SWBA   = 0x00010000,
815         AR5K_INT_BMISS  = 0x00040000,
816         AR5K_INT_BNR    = 0x00100000, /* Not common */
817         AR5K_INT_GPIO   = 0x01000000,
818         AR5K_INT_FATAL  = 0x40000000, /* Not common */
819         AR5K_INT_GLOBAL = 0x80000000,
820
821         AR5K_INT_COMMON  = AR5K_INT_RXNOFRM
822                         | AR5K_INT_RXDESC
823                         | AR5K_INT_RXEOL
824                         | AR5K_INT_RXORN
825                         | AR5K_INT_TXURN
826                         | AR5K_INT_TXDESC
827                         | AR5K_INT_MIB
828                         | AR5K_INT_RXPHY
829                         | AR5K_INT_RXKCM
830                         | AR5K_INT_SWBA
831                         | AR5K_INT_BMISS
832                         | AR5K_INT_GPIO,
833         AR5K_INT_NOCARD = 0xffffffff
834 };
835
836 /*
837  * Power management
838  */
839 enum ath5k_power_mode {
840         AR5K_PM_UNDEFINED = 0,
841         AR5K_PM_AUTO,
842         AR5K_PM_AWAKE,
843         AR5K_PM_FULL_SLEEP,
844         AR5K_PM_NETWORK_SLEEP,
845 };
846
847 /*
848  * These match net80211 definitions (not used in
849  * d80211).
850  */
851 #define AR5K_LED_INIT   0 /*IEEE80211_S_INIT*/
852 #define AR5K_LED_SCAN   1 /*IEEE80211_S_SCAN*/
853 #define AR5K_LED_AUTH   2 /*IEEE80211_S_AUTH*/
854 #define AR5K_LED_ASSOC  3 /*IEEE80211_S_ASSOC*/
855 #define AR5K_LED_RUN    4 /*IEEE80211_S_RUN*/
856
857 /* GPIO-controlled software LED */
858 #define AR5K_SOFTLED_PIN        0
859 #define AR5K_SOFTLED_ON         0
860 #define AR5K_SOFTLED_OFF        1
861
862 /*
863  * Chipset capabilities -see ath5k_hw_get_capability-
864  * get_capability function is not yet fully implemented
865  * in OpenHAL so most of these don't work yet...
866  */
867 enum ath5k_capability_type {
868         AR5K_CAP_REG_DMN                = 0,    /* Used to get current reg. domain id */
869         AR5K_CAP_TKIP_MIC               = 2,    /* Can handle TKIP MIC in hardware */
870         AR5K_CAP_TKIP_SPLIT             = 3,    /* TKIP uses split keys */
871         AR5K_CAP_PHYCOUNTERS            = 4,    /* PHY error counters */
872         AR5K_CAP_DIVERSITY              = 5,    /* Supports fast diversity */
873         AR5K_CAP_NUM_TXQUEUES           = 6,    /* Used to get max number of hw txqueues */
874         AR5K_CAP_VEOL                   = 7,    /* Supports virtual EOL */
875         AR5K_CAP_COMPRESSION            = 8,    /* Supports compression */
876         AR5K_CAP_BURST                  = 9,    /* Supports packet bursting */
877         AR5K_CAP_FASTFRAME              = 10,   /* Supports fast frames */
878         AR5K_CAP_TXPOW                  = 11,   /* Used to get global tx power limit */
879         AR5K_CAP_TPC                    = 12,   /* Can do per-packet tx power control (needed for 802.11a) */
880         AR5K_CAP_BSSIDMASK              = 13,   /* Supports bssid mask */
881         AR5K_CAP_MCAST_KEYSRCH          = 14,   /* Supports multicast key search */
882         AR5K_CAP_TSF_ADJUST             = 15,   /* Supports beacon tsf adjust */
883         AR5K_CAP_XR                     = 16,   /* Supports XR mode */
884         AR5K_CAP_WME_TKIPMIC            = 17,   /* Supports TKIP MIC when using WMM */
885         AR5K_CAP_CHAN_HALFRATE          = 18,   /* Supports half rate channels */
886         AR5K_CAP_CHAN_QUARTERRATE       = 19,   /* Supports quarter rate channels */
887         AR5K_CAP_RFSILENT               = 20,   /* Supports RFsilent */
888 };
889
890
891 /* XXX: we *may* move cap_range stuff to struct wiphy */
892 struct ath5k_capabilities {
893         /*
894          * Supported PHY modes
895          * (ie. CHANNEL_A, CHANNEL_B, ...)
896          */
897         DECLARE_BITMAP(cap_mode, AR5K_MODE_MAX);
898
899         /*
900          * Frequency range (without regulation restrictions)
901          */
902         struct {
903                 u16     range_2ghz_min;
904                 u16     range_2ghz_max;
905                 u16     range_5ghz_min;
906                 u16     range_5ghz_max;
907         } cap_range;
908
909         /*
910          * Values stored in the EEPROM (some of them...)
911          */
912         struct ath5k_eeprom_info        cap_eeprom;
913
914         /*
915          * Queue information
916          */
917         struct {
918                 u8      q_tx_num;
919         } cap_queues;
920 };
921
922
923 /***************************************\
924   HARDWARE ABSTRACTION LAYER STRUCTURE
925 \***************************************/
926
927 /*
928  * Misc defines
929  */
930
931 #define AR5K_MAX_GPIO           10
932 #define AR5K_MAX_RF_BANKS       8
933
934 struct ath5k_hw {
935         u32                     ah_magic;
936
937         struct ath5k_softc      *ah_sc;
938         void __iomem            *ah_iobase;
939
940         enum ath5k_int          ah_imr;
941
942         enum ieee80211_if_types ah_op_mode;
943         enum ath5k_power_mode   ah_power_mode;
944         struct ieee80211_channel ah_current_channel;
945         bool                    ah_turbo;
946         bool                    ah_calibration;
947         bool                    ah_running;
948         bool                    ah_single_chip;
949         enum ath5k_rfgain       ah_rf_gain;
950
951         u32                     ah_mac_srev;
952         u16                     ah_mac_version;
953         u16                     ah_mac_revision;
954         u16                     ah_phy_revision;
955         u16                     ah_radio_5ghz_revision;
956         u16                     ah_radio_2ghz_revision;
957         u32                     ah_phy_spending;
958
959         enum ath5k_version      ah_version;
960         enum ath5k_radio        ah_radio;
961         u32                     ah_phy;
962
963         bool                    ah_5ghz;
964         bool                    ah_2ghz;
965
966 #define ah_regdomain            ah_capabilities.cap_regdomain.reg_current
967 #define ah_regdomain_hw         ah_capabilities.cap_regdomain.reg_hw
968 #define ah_modes                ah_capabilities.cap_mode
969 #define ah_ee_version           ah_capabilities.cap_eeprom.ee_version
970
971         u32                     ah_atim_window;
972         u32                     ah_aifs;
973         u32                     ah_cw_min;
974         u32                     ah_cw_max;
975         bool                    ah_software_retry;
976         u32                     ah_limit_tx_retries;
977
978         u32                     ah_antenna[AR5K_EEPROM_N_MODES][AR5K_ANT_MAX];
979         bool                    ah_ant_diversity;
980
981         u8                      ah_sta_id[ETH_ALEN];
982
983         /* Current BSSID we are trying to assoc to / creating.
984          * This is passed by mac80211 on config_interface() and cached here for
985          * use in resets */
986         u8                      ah_bssid[ETH_ALEN];
987
988         u32                     ah_gpio[AR5K_MAX_GPIO];
989         int                     ah_gpio_npins;
990
991         struct ath5k_capabilities ah_capabilities;
992
993         struct ath5k_txq_info   ah_txq[AR5K_NUM_TX_QUEUES];
994         u32                     ah_txq_status;
995         u32                     ah_txq_imr_txok;
996         u32                     ah_txq_imr_txerr;
997         u32                     ah_txq_imr_txurn;
998         u32                     ah_txq_imr_txdesc;
999         u32                     ah_txq_imr_txeol;
1000         u32                     *ah_rf_banks;
1001         size_t                  ah_rf_banks_size;
1002         struct ath5k_gain       ah_gain;
1003         u32                     ah_offset[AR5K_MAX_RF_BANKS];
1004
1005         struct {
1006                 u16             txp_pcdac[AR5K_EEPROM_POWER_TABLE_SIZE];
1007                 u16             txp_rates[AR5K_MAX_RATES];
1008                 s16             txp_min;
1009                 s16             txp_max;
1010                 bool            txp_tpc;
1011                 s16             txp_ofdm;
1012         } ah_txpower;
1013
1014         struct {
1015                 bool            r_enabled;
1016                 int             r_last_alert;
1017                 struct ieee80211_channel r_last_channel;
1018         } ah_radar;
1019
1020         /* noise floor from last periodic calibration */
1021         s32                     ah_noise_floor;
1022
1023         /*
1024          * Function pointers
1025          */
1026         int (*ah_setup_tx_desc)(struct ath5k_hw *, struct ath5k_desc *,
1027                 unsigned int, unsigned int, enum ath5k_pkt_type, unsigned int,
1028                 unsigned int, unsigned int, unsigned int, unsigned int,
1029                 unsigned int, unsigned int, unsigned int);
1030         int (*ah_setup_xtx_desc)(struct ath5k_hw *, struct ath5k_desc *,
1031                 unsigned int, unsigned int, unsigned int, unsigned int,
1032                 unsigned int, unsigned int);
1033         int (*ah_proc_tx_desc)(struct ath5k_hw *, struct ath5k_desc *,
1034                 struct ath5k_tx_status *);
1035         int (*ah_proc_rx_desc)(struct ath5k_hw *, struct ath5k_desc *,
1036                 struct ath5k_rx_status *);
1037 };
1038
1039 /*
1040  * Prototypes
1041  */
1042
1043 /* General Functions */
1044 extern int ath5k_hw_register_timeout(struct ath5k_hw *ah, u32 reg, u32 flag, u32 val, bool is_set);
1045 /* Attach/Detach Functions */
1046 extern struct ath5k_hw *ath5k_hw_attach(struct ath5k_softc *sc, u8 mac_version);
1047 extern const struct ath5k_rate_table *ath5k_hw_get_rate_table(struct ath5k_hw *ah, unsigned int mode);
1048 extern void ath5k_hw_detach(struct ath5k_hw *ah);
1049 /* Reset Functions */
1050 extern int ath5k_hw_reset(struct ath5k_hw *ah, enum ieee80211_if_types op_mode, struct ieee80211_channel *channel, bool change_channel);
1051 /* Power management functions */
1052 extern int ath5k_hw_set_power(struct ath5k_hw *ah, enum ath5k_power_mode mode, bool set_chip, u16 sleep_duration);
1053 /* DMA Related Functions */
1054 extern void ath5k_hw_start_rx(struct ath5k_hw *ah);
1055 extern int ath5k_hw_stop_rx_dma(struct ath5k_hw *ah);
1056 extern u32 ath5k_hw_get_rx_buf(struct ath5k_hw *ah);
1057 extern void ath5k_hw_put_rx_buf(struct ath5k_hw *ah, u32 phys_addr);
1058 extern int ath5k_hw_tx_start(struct ath5k_hw *ah, unsigned int queue);
1059 extern int ath5k_hw_stop_tx_dma(struct ath5k_hw *ah, unsigned int queue);
1060 extern u32 ath5k_hw_get_tx_buf(struct ath5k_hw *ah, unsigned int queue);
1061 extern int ath5k_hw_put_tx_buf(struct ath5k_hw *ah, unsigned int queue, u32 phys_addr);
1062 extern int ath5k_hw_update_tx_triglevel(struct ath5k_hw *ah, bool increase);
1063 /* Interrupt handling */
1064 extern bool ath5k_hw_is_intr_pending(struct ath5k_hw *ah);
1065 extern int ath5k_hw_get_isr(struct ath5k_hw *ah, enum ath5k_int *interrupt_mask);
1066 extern enum ath5k_int ath5k_hw_set_intr(struct ath5k_hw *ah, enum ath5k_int new_mask);
1067 extern void ath5k_hw_update_mib_counters(struct ath5k_hw *ah, struct ieee80211_low_level_stats *stats);
1068 /* EEPROM access functions */
1069 extern int ath5k_hw_set_regdomain(struct ath5k_hw *ah, u16 regdomain);
1070 /* Protocol Control Unit Functions */
1071 extern int ath5k_hw_set_opmode(struct ath5k_hw *ah);
1072 /* BSSID Functions */
1073 extern void ath5k_hw_get_lladdr(struct ath5k_hw *ah, u8 *mac);
1074 extern int ath5k_hw_set_lladdr(struct ath5k_hw *ah, const u8 *mac);
1075 extern void ath5k_hw_set_associd(struct ath5k_hw *ah, const u8 *bssid, u16 assoc_id);
1076 extern int ath5k_hw_set_bssid_mask(struct ath5k_hw *ah, const u8 *mask);
1077 /* Receive start/stop functions */
1078 extern void ath5k_hw_start_rx_pcu(struct ath5k_hw *ah);
1079 extern void ath5k_hw_stop_pcu_recv(struct ath5k_hw *ah);
1080 /* RX Filter functions */
1081 extern void ath5k_hw_set_mcast_filter(struct ath5k_hw *ah, u32 filter0, u32 filter1);
1082 extern int ath5k_hw_set_mcast_filterindex(struct ath5k_hw *ah, u32 index);
1083 extern int ath5k_hw_clear_mcast_filter_idx(struct ath5k_hw *ah, u32 index);
1084 extern u32 ath5k_hw_get_rx_filter(struct ath5k_hw *ah);
1085 extern void ath5k_hw_set_rx_filter(struct ath5k_hw *ah, u32 filter);
1086 /* Beacon related functions */
1087 extern u32 ath5k_hw_get_tsf32(struct ath5k_hw *ah);
1088 extern u64 ath5k_hw_get_tsf64(struct ath5k_hw *ah);
1089 extern void ath5k_hw_reset_tsf(struct ath5k_hw *ah);
1090 extern void ath5k_hw_init_beacon(struct ath5k_hw *ah, u32 next_beacon, u32 interval);
1091 #if 0
1092 extern int ath5k_hw_set_beacon_timers(struct ath5k_hw *ah, const struct ath5k_beacon_state *state);
1093 extern void ath5k_hw_reset_beacon(struct ath5k_hw *ah);
1094 extern int ath5k_hw_beaconq_finish(struct ath5k_hw *ah, unsigned long phys_addr);
1095 #endif
1096 /* ACK bit rate */
1097 void ath5k_hw_set_ack_bitrate_high(struct ath5k_hw *ah, bool high);
1098 /* ACK/CTS Timeouts */
1099 extern int ath5k_hw_set_ack_timeout(struct ath5k_hw *ah, unsigned int timeout);
1100 extern unsigned int ath5k_hw_get_ack_timeout(struct ath5k_hw *ah);
1101 extern int ath5k_hw_set_cts_timeout(struct ath5k_hw *ah, unsigned int timeout);
1102 extern unsigned int ath5k_hw_get_cts_timeout(struct ath5k_hw *ah);
1103 /* Key table (WEP) functions */
1104 extern int ath5k_hw_reset_key(struct ath5k_hw *ah, u16 entry);
1105 extern int ath5k_hw_is_key_valid(struct ath5k_hw *ah, u16 entry);
1106 extern int ath5k_hw_set_key(struct ath5k_hw *ah, u16 entry, const struct ieee80211_key_conf *key, const u8 *mac);
1107 extern int ath5k_hw_set_key_lladdr(struct ath5k_hw *ah, u16 entry, const u8 *mac);
1108 /* Queue Control Unit, DFS Control Unit Functions */
1109 extern int ath5k_hw_setup_tx_queue(struct ath5k_hw *ah, enum ath5k_tx_queue queue_type, struct ath5k_txq_info *queue_info);
1110 extern int ath5k_hw_setup_tx_queueprops(struct ath5k_hw *ah, int queue, const struct ath5k_txq_info *queue_info);
1111 extern int ath5k_hw_get_tx_queueprops(struct ath5k_hw *ah, int queue, struct ath5k_txq_info *queue_info);
1112 extern void ath5k_hw_release_tx_queue(struct ath5k_hw *ah, unsigned int queue);
1113 extern int ath5k_hw_reset_tx_queue(struct ath5k_hw *ah, unsigned int queue);
1114 extern u32 ath5k_hw_num_tx_pending(struct ath5k_hw *ah, unsigned int queue);
1115 extern int ath5k_hw_set_slot_time(struct ath5k_hw *ah, unsigned int slot_time);
1116 extern unsigned int ath5k_hw_get_slot_time(struct ath5k_hw *ah);
1117 /* Hardware Descriptor Functions */
1118 extern int ath5k_hw_setup_rx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc, u32 size, unsigned int flags);
1119 /* GPIO Functions */
1120 extern void ath5k_hw_set_ledstate(struct ath5k_hw *ah, unsigned int state);
1121 extern int ath5k_hw_set_gpio_output(struct ath5k_hw *ah, u32 gpio);
1122 extern int ath5k_hw_set_gpio_input(struct ath5k_hw *ah, u32 gpio);
1123 extern u32 ath5k_hw_get_gpio(struct ath5k_hw *ah, u32 gpio);
1124 extern int ath5k_hw_set_gpio(struct ath5k_hw *ah, u32 gpio, u32 val);
1125 extern void ath5k_hw_set_gpio_intr(struct ath5k_hw *ah, unsigned int gpio, u32 interrupt_level);
1126 /* Misc functions */
1127 extern int ath5k_hw_get_capability(struct ath5k_hw *ah, enum ath5k_capability_type cap_type, u32 capability, u32 *result);
1128
1129
1130 /* Initial register settings functions */
1131 extern int ath5k_hw_write_initvals(struct ath5k_hw *ah, u8 mode, bool change_channel);
1132 /* Initialize RF */
1133 extern int ath5k_hw_rfregs(struct ath5k_hw *ah, struct ieee80211_channel *channel, unsigned int mode);
1134 extern int ath5k_hw_rfgain(struct ath5k_hw *ah, unsigned int freq);
1135 extern enum ath5k_rfgain ath5k_hw_get_rf_gain(struct ath5k_hw *ah);
1136 extern int ath5k_hw_set_rfgain_opt(struct ath5k_hw *ah);
1137
1138
1139 /* PHY/RF channel functions */
1140 extern bool ath5k_channel_ok(struct ath5k_hw *ah, u16 freq, unsigned int flags);
1141 extern int ath5k_hw_channel(struct ath5k_hw *ah, struct ieee80211_channel *channel);
1142 /* PHY calibration */
1143 extern int ath5k_hw_phy_calibrate(struct ath5k_hw *ah, struct ieee80211_channel *channel);
1144 extern int ath5k_hw_phy_disable(struct ath5k_hw *ah);
1145 /* Misc PHY functions */
1146 extern u16 ath5k_hw_radio_revision(struct ath5k_hw *ah, unsigned int chan);
1147 extern void ath5k_hw_set_def_antenna(struct ath5k_hw *ah, unsigned int ant);
1148 extern unsigned int ath5k_hw_get_def_antenna(struct ath5k_hw *ah);
1149 extern int ath5k_hw_noise_floor_calibration(struct ath5k_hw *ah, short freq);
1150 /* TX power setup */
1151 extern int ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel, unsigned int txpower);
1152 extern int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, unsigned int power);
1153
1154
1155 static inline u32 ath5k_hw_reg_read(struct ath5k_hw *ah, u16 reg)
1156 {
1157         return ioread32(ah->ah_iobase + reg);
1158 }
1159
1160 static inline void ath5k_hw_reg_write(struct ath5k_hw *ah, u32 val, u16 reg)
1161 {
1162         iowrite32(val, ah->ah_iobase + reg);
1163 }
1164
1165 #endif