drivers/net/phy/marvell.c

   1 /*
   2  * drivers/net/phy/marvell.c
   3  *
   4  * Driver for Marvell PHYs
   5  *
   6  * Author: Andy Fleming
   7  *
   8  * Copyright (c) 2004 Freescale Semiconductor, Inc.
   9  *
  10  * This program is free software; you can redistribute  it and/or modify it
  11  * under  the terms of  the GNU General  Public License as published by the
  12  * Free Software Foundation;  either version 2 of the  License, or (at your
  13  * option) any later version.
  14  *
  15  */
  16 #include <linux/kernel.h>
  17 #include <linux/string.h>
  18 #include <linux/errno.h>
  19 #include <linux/unistd.h>
  20 #include <linux/slab.h>
  21 #include <linux/interrupt.h>
  22 #include <linux/init.h>
  23 #include <linux/delay.h>
  24 #include <linux/netdevice.h>
  25 #include <linux/etherdevice.h>
  26 #include <linux/skbuff.h>
  27 #include <linux/spinlock.h>
  28 #include <linux/mm.h>
  29 #include <linux/module.h>
  30 #include <linux/mii.h>
  31 #include <linux/ethtool.h>
  32 #include <linux/phy.h>
  33
  34 #include <asm/io.h>
  35 #include <asm/irq.h>
  36 #include <asm/uaccess.h>
  37
  38 #define MII_M1011_IEVENT                0x13
  39 #define MII_M1011_IEVENT_CLEAR          0x0000
  40
  41 #define MII_M1011_IMASK                 0x12
  42 #define MII_M1011_IMASK_INIT            0x6400
  43 #define MII_M1011_IMASK_CLEAR           0x0000
  44
  45 #define MII_M1011_PHY_SCR               0x10
  46 #define MII_M1011_PHY_SCR_AUTO_CROSS    0x0060
  47
  48 #define MII_M1145_PHY_EXT_CR            0x14
  49 #define MII_M1145_RGMII_RX_DELAY        0x0080
  50 #define MII_M1145_RGMII_TX_DELAY        0x0002
  51
  52 #define M1145_DEV_FLAGS_RESISTANCE      0x00000001
  53
  54 #define MII_M1111_PHY_LED_CONTROL       0x18
  55 #define MII_M1111_PHY_LED_DIRECT        0x4100
  56 #define MII_M1111_PHY_LED_COMBINE       0x411c
  57 #define MII_M1111_PHY_EXT_CR            0x14
  58 #define MII_M1111_RX_DELAY              0x80
  59 #define MII_M1111_TX_DELAY              0x2
  60 #define MII_M1111_PHY_EXT_SR            0x1b
  61
  62 #define MII_M1111_HWCFG_MODE_MASK               0xf
  63 #define MII_M1111_HWCFG_MODE_COPPER_RGMII       0xb
  64 #define MII_M1111_HWCFG_MODE_FIBER_RGMII        0x3
  65 #define MII_M1111_HWCFG_MODE_SGMII_NO_CLK       0x4
  66 #define MII_M1111_HWCFG_FIBER_COPPER_AUTO       0x8000
  67 #define MII_M1111_HWCFG_FIBER_COPPER_RES        0x2000
  68
  69 #define MII_M1111_COPPER                0
  70 #define MII_M1111_FIBER                 1
  71
  72 #define MII_M1011_PHY_STATUS            0x11
  73 #define MII_M1011_PHY_STATUS_1000       0x8000
  74 #define MII_M1011_PHY_STATUS_100        0x4000
  75 #define MII_M1011_PHY_STATUS_SPD_MASK   0xc000
  76 #define MII_M1011_PHY_STATUS_FULLDUPLEX 0x2000
  77 #define MII_M1011_PHY_STATUS_RESOLVED   0x0800
  78 #define MII_M1011_PHY_STATUS_LINK       0x0400
  79
  80
  81 MODULE_DESCRIPTION("Marvell PHY driver");
  82 MODULE_AUTHOR("Andy Fleming");
  83 MODULE_LICENSE("GPL");
  84
  85 static int marvell_ack_interrupt(struct phy_device *phydev)
  86 {
  87         int err;
  88
  89         /* Clear the interrupts by reading the reg */
  90         err = phy_read(phydev, MII_M1011_IEVENT);
  91
  92         if (err < 0)
  93                 return err;
  94
  95         return 0;
  96 }
  97
  98 static int marvell_config_intr(struct phy_device *phydev)
  99 {
 100         int err;
 101
 102         if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
 103                 err = phy_write(phydev, MII_M1011_IMASK, MII_M1011_IMASK_INIT);
 104         else
 105                 err = phy_write(phydev, MII_M1011_IMASK, MII_M1011_IMASK_CLEAR);
 106
 107         return err;
 108 }
 109
 110 static int marvell_config_aneg(struct phy_device *phydev)
 111 {
 112         int err;
 113
 114         /* The Marvell PHY has an errata which requires
 115          * that certain registers get written in order
 116          * to restart autonegotiation */
 117         err = phy_write(phydev, MII_BMCR, BMCR_RESET);
 118
 119         if (err < 0)
 120                 return err;
 121
 122         err = phy_write(phydev, 0x1d, 0x1f);
 123         if (err < 0)
 124                 return err;
 125
 126         err = phy_write(phydev, 0x1e, 0x200c);
 127         if (err < 0)
 128                 return err;
 129
 130         err = phy_write(phydev, 0x1d, 0x5);
 131         if (err < 0)
 132                 return err;
 133
 134         err = phy_write(phydev, 0x1e, 0);
 135         if (err < 0)
 136                 return err;
 137
 138         err = phy_write(phydev, 0x1e, 0x100);
 139         if (err < 0)
 140                 return err;
 141
 142         err = phy_write(phydev, MII_M1011_PHY_SCR,
 143                         MII_M1011_PHY_SCR_AUTO_CROSS);
 144         if (err < 0)
 145                 return err;
 146
 147         err = phy_write(phydev, MII_M1111_PHY_LED_CONTROL,
 148                         MII_M1111_PHY_LED_DIRECT);
 149         if (err < 0)
 150                 return err;
 151
 152         err = genphy_config_aneg(phydev);
 153
 154         return err;
 155 }
 156
 157 static int m88e1111_config_init(struct phy_device *phydev)
 158 {
 159         int err;
 160         int temp;
 161
 162         /* Enable Fiber/Copper auto selection */
 163         temp = phy_read(phydev, MII_M1111_PHY_EXT_SR);
 164         temp &= ~MII_M1111_HWCFG_FIBER_COPPER_AUTO;
 165         phy_write(phydev, MII_M1111_PHY_EXT_SR, temp);
 166
 167         temp = phy_read(phydev, MII_BMCR);
 168         temp |= BMCR_RESET;
 169         phy_write(phydev, MII_BMCR, temp);
 170
 171         if ((phydev->interface == PHY_INTERFACE_MODE_RGMII) ||
 172             (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) ||
 173             (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) ||
 174             (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID)) {
 175
 176                 temp = phy_read(phydev, MII_M1111_PHY_EXT_CR);
 177                 if (temp < 0)
 178                         return temp;
 179
 180                 if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) {
 181                         temp |= (MII_M1111_RX_DELAY | MII_M1111_TX_DELAY);
 182                 } else if (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) {
 183                         temp &= ~MII_M1111_TX_DELAY;
 184                         temp |= MII_M1111_RX_DELAY;
 185                 } else if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) {
 186                         temp &= ~MII_M1111_RX_DELAY;
 187                         temp |= MII_M1111_TX_DELAY;
 188                 }
 189
 190                 err = phy_write(phydev, MII_M1111_PHY_EXT_CR, temp);
 191                 if (err < 0)
 192                         return err;
 193
 194                 temp = phy_read(phydev, MII_M1111_PHY_EXT_SR);
 195                 if (temp < 0)
 196                         return temp;
 197
 198                 temp &= ~(MII_M1111_HWCFG_MODE_MASK);
 199
 200                 if (temp & MII_M1111_HWCFG_FIBER_COPPER_RES)
 201                         temp |= MII_M1111_HWCFG_MODE_FIBER_RGMII;
 202                 else
 203                         temp |= MII_M1111_HWCFG_MODE_COPPER_RGMII;
 204
 205                 err = phy_write(phydev, MII_M1111_PHY_EXT_SR, temp);
 206                 if (err < 0)
 207                         return err;
 208         }
 209
 210         if (phydev->interface == PHY_INTERFACE_MODE_SGMII) {
 211                 temp = phy_read(phydev, MII_M1111_PHY_EXT_SR);
 212                 if (temp < 0)
 213                         return temp;
 214
 215                 temp &= ~(MII_M1111_HWCFG_MODE_MASK);
 216                 temp |= MII_M1111_HWCFG_MODE_SGMII_NO_CLK;
 217
 218                 err = phy_write(phydev, MII_M1111_PHY_EXT_SR, temp);
 219                 if (err < 0)
 220                         return err;
 221         }
 222
 223         err = phy_write(phydev, MII_BMCR, BMCR_RESET);
 224         if (err < 0)
 225                 return err;
 226
 227         return 0;
 228 }
 229
 230 static int m88e1145_config_init(struct phy_device *phydev)
 231 {
 232         int err;
 233
 234         /* Take care of errata E0 & E1 */
 235         err = phy_write(phydev, 0x1d, 0x001b);
 236         if (err < 0)
 237                 return err;
 238
 239         err = phy_write(phydev, 0x1e, 0x418f);
 240         if (err < 0)
 241                 return err;
 242
 243         err = phy_write(phydev, 0x1d, 0x0016);
 244         if (err < 0)
 245                 return err;
 246
 247         err = phy_write(phydev, 0x1e, 0xa2da);
 248         if (err < 0)
 249                 return err;
 250
 251         if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) {
 252                 int temp = phy_read(phydev, MII_M1145_PHY_EXT_CR);
 253                 if (temp < 0)
 254                         return temp;
 255
 256                 temp |= (MII_M1145_RGMII_RX_DELAY | MII_M1145_RGMII_TX_DELAY);
 257
 258                 err = phy_write(phydev, MII_M1145_PHY_EXT_CR, temp);
 259                 if (err < 0)
 260                         return err;
 261
 262                 if (phydev->dev_flags & M1145_DEV_FLAGS_RESISTANCE) {
 263                         err = phy_write(phydev, 0x1d, 0x0012);
 264                         if (err < 0)
 265                                 return err;
 266
 267                         temp = phy_read(phydev, 0x1e);
 268                         if (temp < 0)
 269                                 return temp;
 270
 271                         temp &= 0xf03f;
 272                         temp |= 2 << 9; /* 36 ohm */
 273                         temp |= 2 << 6; /* 39 ohm */
 274
 275                         err = phy_write(phydev, 0x1e, temp);
 276                         if (err < 0)
 277                                 return err;
 278
 279                         err = phy_write(phydev, 0x1d, 0x3);
 280                         if (err < 0)
 281                                 return err;
 282
 283                         err = phy_write(phydev, 0x1e, 0x8000);
 284                         if (err < 0)
 285                                 return err;
 286                 }
 287         }
 288
 289         return 0;
 290 }
 291
 292 /* marvell_read_status
 293  *
 294  * Generic status code does not detect Fiber correctly!
 295  * Description:
 296  *   Check the link, then figure out the current state
 297  *   by comparing what we advertise with what the link partner
 298  *   advertises.  Start by checking the gigabit possibilities,
 299  *   then move on to 10/100.
 300  */
 301 static int marvell_read_status(struct phy_device *phydev)
 302 {
 303         int adv;
 304         int err;
 305         int lpa;
 306         int status = 0;
 307
 308         /* Update the link, but return if there
 309          * was an error */
 310         err = genphy_update_link(phydev);
 311         if (err)
 312                 return err;
 313
 314         if (AUTONEG_ENABLE == phydev->autoneg) {
 315                 status = phy_read(phydev, MII_M1011_PHY_STATUS);
 316                 if (status < 0)
 317                         return status;
 318
 319                 lpa = phy_read(phydev, MII_LPA);
 320                 if (lpa < 0)
 321                         return lpa;
 322
 323                 adv = phy_read(phydev, MII_ADVERTISE);
 324                 if (adv < 0)
 325                         return adv;
 326
 327                 lpa &= adv;
 328
 329                 if (status & MII_M1011_PHY_STATUS_FULLDUPLEX)
 330                         phydev->duplex = DUPLEX_FULL;
 331                 else
 332                         phydev->duplex = DUPLEX_HALF;
 333
 334                 status = status & MII_M1011_PHY_STATUS_SPD_MASK;
 335                 phydev->pause = phydev->asym_pause = 0;
 336
 337                 switch (status) {
 338                 case MII_M1011_PHY_STATUS_1000:
 339                         phydev->speed = SPEED_1000;
 340                         break;
 341
 342                 case MII_M1011_PHY_STATUS_100:
 343                         phydev->speed = SPEED_100;
 344                         break;
 345
 346                 default:
 347                         phydev->speed = SPEED_10;
 348                         break;
 349                 }
 350
 351                 if (phydev->duplex == DUPLEX_FULL) {
 352                         phydev->pause = lpa & LPA_PAUSE_CAP ? 1 : 0;
 353                         phydev->asym_pause = lpa & LPA_PAUSE_ASYM ? 1 : 0;
 354                 }
 355         } else {
 356                 int bmcr = phy_read(phydev, MII_BMCR);
 357
 358                 if (bmcr < 0)
 359                         return bmcr;
 360
 361                 if (bmcr & BMCR_FULLDPLX)
 362                         phydev->duplex = DUPLEX_FULL;
 363                 else
 364                         phydev->duplex = DUPLEX_HALF;
 365
 366                 if (bmcr & BMCR_SPEED1000)
 367                         phydev->speed = SPEED_1000;
 368                 else if (bmcr & BMCR_SPEED100)
 369                         phydev->speed = SPEED_100;
 370                 else
 371                         phydev->speed = SPEED_10;
 372
 373                 phydev->pause = phydev->asym_pause = 0;
 374         }
 375
 376         return 0;
 377 }
 378
 379 static struct phy_driver marvell_drivers[] = {
 380         {
 381                 .phy_id = 0x01410c60,
 382                 .phy_id_mask = 0xfffffff0,
 383                 .name = "Marvell 88E1101",
 384                 .features = PHY_GBIT_FEATURES,
 385                 .flags = PHY_HAS_INTERRUPT,
 386                 .config_aneg = &marvell_config_aneg,
 387                 .read_status = &genphy_read_status,
 388                 .ack_interrupt = &marvell_ack_interrupt,
 389                 .config_intr = &marvell_config_intr,
 390                 .driver = { .owner = THIS_MODULE },
 391         },
 392         {
 393                 .phy_id = 0x01410c90,
 394                 .phy_id_mask = 0xfffffff0,
 395                 .name = "Marvell 88E1112",
 396                 .features = PHY_GBIT_FEATURES,
 397                 .flags = PHY_HAS_INTERRUPT,
 398                 .config_init = &m88e1111_config_init,
 399                 .config_aneg = &marvell_config_aneg,
 400                 .read_status = &genphy_read_status,
 401                 .ack_interrupt = &marvell_ack_interrupt,
 402                 .config_intr = &marvell_config_intr,
 403                 .driver = { .owner = THIS_MODULE },
 404         },
 405         {
 406                 .phy_id = 0x01410cc0,
 407                 .phy_id_mask = 0xfffffff0,
 408                 .name = "Marvell 88E1111",
 409                 .features = PHY_GBIT_FEATURES,
 410                 .flags = PHY_HAS_INTERRUPT,
 411                 .config_init = &m88e1111_config_init,
 412                 .config_aneg = &marvell_config_aneg,
 413                 .read_status = &marvell_read_status,
 414                 .ack_interrupt = &marvell_ack_interrupt,
 415                 .config_intr = &marvell_config_intr,
 416                 .driver = { .owner = THIS_MODULE },
 417         },
 418         {
 419                 .phy_id = 0x01410cd0,
 420                 .phy_id_mask = 0xfffffff0,
 421                 .name = "Marvell 88E1145",
 422                 .features = PHY_GBIT_FEATURES,
 423                 .flags = PHY_HAS_INTERRUPT,
 424                 .config_init = &m88e1145_config_init,
 425                 .config_aneg = &marvell_config_aneg,
 426                 .read_status = &genphy_read_status,
 427                 .ack_interrupt = &marvell_ack_interrupt,
 428                 .config_intr = &marvell_config_intr,
 429                 .driver = { .owner = THIS_MODULE },
 430         },
 431         {
 432                 .phy_id = 0x01410e30,
 433                 .phy_id_mask = 0xfffffff0,
 434                 .name = "Marvell 88E1240",
 435                 .features = PHY_GBIT_FEATURES,
 436                 .flags = PHY_HAS_INTERRUPT,
 437                 .config_init = &m88e1111_config_init,
 438                 .config_aneg = &marvell_config_aneg,
 439                 .read_status = &genphy_read_status,
 440                 .ack_interrupt = &marvell_ack_interrupt,
 441                 .config_intr = &marvell_config_intr,
 442                 .driver = { .owner = THIS_MODULE },
 443         },
 444 };
 445
 446 static int __init marvell_init(void)
 447 {
 448         int ret;
 449         int i;
 450
 451         for (i = 0; i < ARRAY_SIZE(marvell_drivers); i++) {
 452                 ret = phy_driver_register(&marvell_drivers[i]);
 453
 454                 if (ret) {
 455                         while (i-- > 0)
 456                                 phy_driver_unregister(&marvell_drivers[i]);
 457                         return ret;
 458                 }
 459         }
 460
 461         return 0;
 462 }
 463
 464 static void __exit marvell_exit(void)
 465 {
 466         int i;
 467
 468         for (i = 0; i < ARRAY_SIZE(marvell_drivers); i++)
 469                 phy_driver_unregister(&marvell_drivers[i]);
 470 }
 471
 472 module_init(marvell_init);
 473 module_exit(marvell_exit);