]> www.pilppa.org Git - linux-2.6-omap-h63xx.git/blob - drivers/net/ibm_newemac/core.h
drivers/net: Use linux/of_{device,platform}.h instead of asm
[linux-2.6-omap-h63xx.git] / drivers / net / ibm_newemac / core.h
1 /*
2  * drivers/net/ibm_newemac/core.h
3  *
4  * Driver for PowerPC 4xx on-chip ethernet controller.
5  *
6  * Copyright 2007 Benjamin Herrenschmidt, IBM Corp.
7  *                <benh@kernel.crashing.org>
8  *
9  * Based on the arch/ppc version of the driver:
10  *
11  * Copyright (c) 2004, 2005 Zultys Technologies.
12  * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
13  *
14  * Based on original work by
15  *      Armin Kuster <akuster@mvista.com>
16  *      Johnnie Peters <jpeters@mvista.com>
17  *      Copyright 2000, 2001 MontaVista Softare Inc.
18  *
19  * This program is free software; you can redistribute  it and/or modify it
20  * under  the terms of  the GNU General  Public License as published by the
21  * Free Software Foundation;  either version 2 of the  License, or (at your
22  * option) any later version.
23  *
24  */
25 #ifndef __IBM_NEWEMAC_CORE_H
26 #define __IBM_NEWEMAC_CORE_H
27
28 #include <linux/module.h>
29 #include <linux/init.h>
30 #include <linux/list.h>
31 #include <linux/kernel.h>
32 #include <linux/interrupt.h>
33 #include <linux/netdevice.h>
34 #include <linux/dma-mapping.h>
35 #include <linux/spinlock.h>
36 #include <linux/of_platform.h>
37
38 #include <asm/io.h>
39 #include <asm/dcr.h>
40
41 #include "emac.h"
42 #include "phy.h"
43 #include "zmii.h"
44 #include "rgmii.h"
45 #include "mal.h"
46 #include "tah.h"
47 #include "debug.h"
48
49 #define NUM_TX_BUFF                     CONFIG_IBM_NEW_EMAC_TXB
50 #define NUM_RX_BUFF                     CONFIG_IBM_NEW_EMAC_RXB
51
52 /* Simple sanity check */
53 #if NUM_TX_BUFF > 256 || NUM_RX_BUFF > 256
54 #error Invalid number of buffer descriptors (greater than 256)
55 #endif
56
57 #define EMAC_MIN_MTU                    46
58
59 /* Maximum L2 header length (VLAN tagged, no FCS) */
60 #define EMAC_MTU_OVERHEAD               (6 * 2 + 2 + 4)
61
62 /* RX BD size for the given MTU */
63 static inline int emac_rx_size(int mtu)
64 {
65         if (mtu > ETH_DATA_LEN)
66                 return MAL_MAX_RX_SIZE;
67         else
68                 return mal_rx_size(ETH_DATA_LEN + EMAC_MTU_OVERHEAD);
69 }
70
71 #define EMAC_DMA_ALIGN(x)               ALIGN((x), dma_get_cache_alignment())
72
73 #define EMAC_RX_SKB_HEADROOM            \
74         EMAC_DMA_ALIGN(CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM)
75
76 /* Size of RX skb for the given MTU */
77 static inline int emac_rx_skb_size(int mtu)
78 {
79         int size = max(mtu + EMAC_MTU_OVERHEAD, emac_rx_size(mtu));
80         return EMAC_DMA_ALIGN(size + 2) + EMAC_RX_SKB_HEADROOM;
81 }
82
83 /* RX DMA sync size */
84 static inline int emac_rx_sync_size(int mtu)
85 {
86         return EMAC_DMA_ALIGN(emac_rx_size(mtu) + 2);
87 }
88
89 /* Driver statistcs is split into two parts to make it more cache friendly:
90  *   - normal statistics (packet count, etc)
91  *   - error statistics
92  *
93  * When statistics is requested by ethtool, these parts are concatenated,
94  * normal one goes first.
95  *
96  * Please, keep these structures in sync with emac_stats_keys.
97  */
98
99 /* Normal TX/RX Statistics */
100 struct emac_stats {
101         u64 rx_packets;
102         u64 rx_bytes;
103         u64 tx_packets;
104         u64 tx_bytes;
105         u64 rx_packets_csum;
106         u64 tx_packets_csum;
107 };
108
109 /* Error statistics */
110 struct emac_error_stats {
111         u64 tx_undo;
112
113         /* Software RX Errors */
114         u64 rx_dropped_stack;
115         u64 rx_dropped_oom;
116         u64 rx_dropped_error;
117         u64 rx_dropped_resize;
118         u64 rx_dropped_mtu;
119         u64 rx_stopped;
120         /* BD reported RX errors */
121         u64 rx_bd_errors;
122         u64 rx_bd_overrun;
123         u64 rx_bd_bad_packet;
124         u64 rx_bd_runt_packet;
125         u64 rx_bd_short_event;
126         u64 rx_bd_alignment_error;
127         u64 rx_bd_bad_fcs;
128         u64 rx_bd_packet_too_long;
129         u64 rx_bd_out_of_range;
130         u64 rx_bd_in_range;
131         /* EMAC IRQ reported RX errors */
132         u64 rx_parity;
133         u64 rx_fifo_overrun;
134         u64 rx_overrun;
135         u64 rx_bad_packet;
136         u64 rx_runt_packet;
137         u64 rx_short_event;
138         u64 rx_alignment_error;
139         u64 rx_bad_fcs;
140         u64 rx_packet_too_long;
141         u64 rx_out_of_range;
142         u64 rx_in_range;
143
144         /* Software TX Errors */
145         u64 tx_dropped;
146         /* BD reported TX errors */
147         u64 tx_bd_errors;
148         u64 tx_bd_bad_fcs;
149         u64 tx_bd_carrier_loss;
150         u64 tx_bd_excessive_deferral;
151         u64 tx_bd_excessive_collisions;
152         u64 tx_bd_late_collision;
153         u64 tx_bd_multple_collisions;
154         u64 tx_bd_single_collision;
155         u64 tx_bd_underrun;
156         u64 tx_bd_sqe;
157         /* EMAC IRQ reported TX errors */
158         u64 tx_parity;
159         u64 tx_underrun;
160         u64 tx_sqe;
161         u64 tx_errors;
162 };
163
164 #define EMAC_ETHTOOL_STATS_COUNT        ((sizeof(struct emac_stats) + \
165                                           sizeof(struct emac_error_stats)) \
166                                          / sizeof(u64))
167
168 struct emac_instance {
169         struct net_device               *ndev;
170         struct resource                 rsrc_regs;
171         struct emac_regs                __iomem *emacp;
172         struct of_device                *ofdev;
173         struct device_node              **blist; /* bootlist entry */
174
175         /* MAL linkage */
176         u32                             mal_ph;
177         struct of_device                *mal_dev;
178         u32                             mal_rx_chan;
179         u32                             mal_tx_chan;
180         struct mal_instance             *mal;
181         struct mal_commac               commac;
182
183         /* PHY infos */
184         u32                             phy_mode;
185         u32                             phy_map;
186         u32                             phy_address;
187         u32                             phy_feat_exc;
188         struct mii_phy                  phy;
189         struct mutex                    link_lock;
190         struct delayed_work             link_work;
191         int                             link_polling;
192
193         /* Shared MDIO if any */
194         u32                             mdio_ph;
195         struct of_device                *mdio_dev;
196         struct emac_instance            *mdio_instance;
197         struct mutex                    mdio_lock;
198
199         /* ZMII infos if any */
200         u32                             zmii_ph;
201         u32                             zmii_port;
202         struct of_device                *zmii_dev;
203
204         /* RGMII infos if any */
205         u32                             rgmii_ph;
206         u32                             rgmii_port;
207         struct of_device                *rgmii_dev;
208
209         /* TAH infos if any */
210         u32                             tah_ph;
211         u32                             tah_port;
212         struct of_device                *tah_dev;
213
214         /* IRQs */
215         int                             wol_irq;
216         int                             emac_irq;
217
218         /* OPB bus frequency in Mhz */
219         u32                             opb_bus_freq;
220
221         /* Cell index within an ASIC (for clk mgmnt) */
222         u32                             cell_index;
223
224         /* Max supported MTU */
225         u32                             max_mtu;
226
227         /* Feature bits (from probe table) */
228         unsigned int                    features;
229
230         /* Tx and Rx fifo sizes & other infos in bytes */
231         u32                             tx_fifo_size;
232         u32                             tx_fifo_size_gige;
233         u32                             rx_fifo_size;
234         u32                             rx_fifo_size_gige;
235         u32                             fifo_entry_size;
236         u32                             mal_burst_size; /* move to MAL ? */
237
238         /* Descriptor management
239          */
240         struct mal_descriptor           *tx_desc;
241         int                             tx_cnt;
242         int                             tx_slot;
243         int                             ack_slot;
244
245         struct mal_descriptor           *rx_desc;
246         int                             rx_slot;
247         struct sk_buff                  *rx_sg_skb;     /* 1 */
248         int                             rx_skb_size;
249         int                             rx_sync_size;
250
251         struct sk_buff                  *tx_skb[NUM_TX_BUFF];
252         struct sk_buff                  *rx_skb[NUM_RX_BUFF];
253
254         /* Stats
255          */
256         struct emac_error_stats         estats;
257         struct net_device_stats         nstats;
258         struct emac_stats               stats;
259
260         /* Misc
261          */
262         int                             reset_failed;
263         int                             stop_timeout;   /* in us */
264         int                             no_mcast;
265         int                             mcast_pending;
266         int                             opened;
267         struct work_struct              reset_work;
268         spinlock_t                      lock;
269 };
270
271 /*
272  * Features of various EMAC implementations
273  */
274
275 /*
276  * No flow control on 40x according to the original driver
277  */
278 #define EMAC_FTR_NO_FLOW_CONTROL_40x    0x00000001
279 /*
280  * Cell is an EMAC4
281  */
282 #define EMAC_FTR_EMAC4                  0x00000002
283 /*
284  * For the 440SPe, AMCC inexplicably changed the polarity of
285  * the "operation complete" bit in the MII control register.
286  */
287 #define EMAC_FTR_STACR_OC_INVERT        0x00000004
288 /*
289  * Set if we have a TAH.
290  */
291 #define EMAC_FTR_HAS_TAH                0x00000008
292 /*
293  * Set if we have a ZMII.
294  */
295 #define EMAC_FTR_HAS_ZMII               0x00000010
296 /*
297  * Set if we have a RGMII.
298  */
299 #define EMAC_FTR_HAS_RGMII              0x00000020
300 /*
301  * Set if we have new type STACR with STAOPC
302  */
303 #define EMAC_FTR_HAS_NEW_STACR          0x00000040
304 /*
305  * Set if we need phy clock workaround for 440gx
306  */
307 #define EMAC_FTR_440GX_PHY_CLK_FIX      0x00000080
308 /*
309  * Set if we need phy clock workaround for 440ep or 440gr
310  */
311 #define EMAC_FTR_440EP_PHY_CLK_FIX      0x00000100
312
313
314 /* Right now, we don't quite handle the always/possible masks on the
315  * most optimal way as we don't have a way to say something like
316  * always EMAC4. Patches welcome.
317  */
318 enum {
319         EMAC_FTRS_ALWAYS        = 0,
320
321         EMAC_FTRS_POSSIBLE      =
322 #ifdef CONFIG_IBM_NEW_EMAC_EMAC4
323             EMAC_FTR_EMAC4 | EMAC_FTR_HAS_NEW_STACR |
324             EMAC_FTR_STACR_OC_INVERT | EMAC_FTR_440GX_PHY_CLK_FIX |
325 #endif
326 #ifdef CONFIG_IBM_NEW_EMAC_TAH
327             EMAC_FTR_HAS_TAH    |
328 #endif
329 #ifdef CONFIG_IBM_NEW_EMAC_ZMII
330             EMAC_FTR_HAS_ZMII   |
331 #endif
332 #ifdef CONFIG_IBM_NEW_EMAC_RGMII
333             EMAC_FTR_HAS_RGMII  |
334 #endif
335         EMAC_FTR_440EP_PHY_CLK_FIX,
336 };
337
338 static inline int emac_has_feature(struct emac_instance *dev,
339                                    unsigned long feature)
340 {
341         return (EMAC_FTRS_ALWAYS & feature) ||
342                (EMAC_FTRS_POSSIBLE & dev->features & feature);
343 }
344
345
346 /* Ethtool get_regs complex data.
347  * We want to get not just EMAC registers, but also MAL, ZMII, RGMII, TAH
348  * when available.
349  *
350  * Returned BLOB consists of the ibm_emac_ethtool_regs_hdr,
351  * MAL registers, EMAC registers and optional ZMII, RGMII, TAH registers.
352  * Each register component is preceded with emac_ethtool_regs_subhdr.
353  * Order of the optional headers follows their relative bit posititions
354  * in emac_ethtool_regs_hdr.components
355  */
356 #define EMAC_ETHTOOL_REGS_ZMII          0x00000001
357 #define EMAC_ETHTOOL_REGS_RGMII         0x00000002
358 #define EMAC_ETHTOOL_REGS_TAH           0x00000004
359
360 struct emac_ethtool_regs_hdr {
361         u32 components;
362 };
363
364 struct emac_ethtool_regs_subhdr {
365         u32 version;
366         u32 index;
367 };
368
369 #endif /* __IBM_NEWEMAC_CORE_H */