drivers/net/e1000e/82571.c

   1 /*******************************************************************************
   2
   3   Intel PRO/1000 Linux driver
   4   Copyright(c) 1999 - 2008 Intel Corporation.
   5
   6   This program is free software; you can redistribute it and/or modify it
   7   under the terms and conditions of the GNU General Public License,
   8   version 2, as published by the Free Software Foundation.
   9
  10   This program is distributed in the hope it will be useful, but WITHOUT
  11   ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  12   FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  13   more details.
  14
  15   You should have received a copy of the GNU General Public License along with
  16   this program; if not, write to the Free Software Foundation, Inc.,
  17   51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
  18
  19   The full GNU General Public License is included in this distribution in
  20   the file called "COPYING".
  21
  22   Contact Information:
  23   Linux NICS <linux.nics@intel.com>
  24   e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
  25   Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
  26
  27 *******************************************************************************/
  28
  29 /*
  30  * 82571EB Gigabit Ethernet Controller
  31  * 82571EB Gigabit Ethernet Controller (Copper)
  32  * 82571EB Gigabit Ethernet Controller (Fiber)
  33  * 82571EB Dual Port Gigabit Mezzanine Adapter
  34  * 82571EB Quad Port Gigabit Mezzanine Adapter
  35  * 82571PT Gigabit PT Quad Port Server ExpressModule
  36  * 82572EI Gigabit Ethernet Controller (Copper)
  37  * 82572EI Gigabit Ethernet Controller (Fiber)
  38  * 82572EI Gigabit Ethernet Controller
  39  * 82573V Gigabit Ethernet Controller (Copper)
  40  * 82573E Gigabit Ethernet Controller (Copper)
  41  * 82573L Gigabit Ethernet Controller
  42  * 82574L Gigabit Network Connection
  43  */
  44
  45 #include <linux/netdevice.h>
  46 #include <linux/delay.h>
  47 #include <linux/pci.h>
  48
  49 #include "e1000.h"
  50
  51 #define ID_LED_RESERVED_F746 0xF746
  52 #define ID_LED_DEFAULT_82573 ((ID_LED_DEF1_DEF2 << 12) | \
  53                               (ID_LED_OFF1_ON2  <<  8) | \
  54                               (ID_LED_DEF1_DEF2 <<  4) | \
  55                               (ID_LED_DEF1_DEF2))
  56
  57 #define E1000_GCR_L1_ACT_WITHOUT_L0S_RX 0x08000000
  58
  59 #define E1000_NVM_INIT_CTRL2_MNGM 0x6000 /* Manageability Operation Mode mask */
  60
  61 static s32 e1000_get_phy_id_82571(struct e1000_hw *hw);
  62 static s32 e1000_setup_copper_link_82571(struct e1000_hw *hw);
  63 static s32 e1000_setup_fiber_serdes_link_82571(struct e1000_hw *hw);
  64 static s32 e1000_write_nvm_eewr_82571(struct e1000_hw *hw, u16 offset,
  65                                       u16 words, u16 *data);
  66 static s32 e1000_fix_nvm_checksum_82571(struct e1000_hw *hw);
  67 static void e1000_initialize_hw_bits_82571(struct e1000_hw *hw);
  68 static s32 e1000_setup_link_82571(struct e1000_hw *hw);
  69 static void e1000_clear_hw_cntrs_82571(struct e1000_hw *hw);
  70 static bool e1000_check_mng_mode_82574(struct e1000_hw *hw);
  71 static s32 e1000_led_on_82574(struct e1000_hw *hw);
  72
  73 /**
  74  *  e1000_init_phy_params_82571 - Init PHY func ptrs.
  75  *  @hw: pointer to the HW structure
  76  *
  77  *  This is a function pointer entry point called by the api module.
  78  **/
  79 static s32 e1000_init_phy_params_82571(struct e1000_hw *hw)
  80 {
  81         struct e1000_phy_info *phy = &hw->phy;
  82         s32 ret_val;
  83
  84         if (hw->phy.media_type != e1000_media_type_copper) {
  85                 phy->type = e1000_phy_none;
  86                 return 0;
  87         }
  88
  89         phy->addr                        = 1;
  90         phy->autoneg_mask                = AUTONEG_ADVERTISE_SPEED_DEFAULT;
  91         phy->reset_delay_us              = 100;
  92
  93         switch (hw->mac.type) {
  94         case e1000_82571:
  95         case e1000_82572:
  96                 phy->type                = e1000_phy_igp_2;
  97                 break;
  98         case e1000_82573:
  99                 phy->type                = e1000_phy_m88;
 100                 break;
 101         case e1000_82574:
 102                 phy->type                = e1000_phy_bm;
 103                 break;
 104         default:
 105                 return -E1000_ERR_PHY;
 106                 break;
 107         }
 108
 109         /* This can only be done after all function pointers are setup. */
 110         ret_val = e1000_get_phy_id_82571(hw);
 111
 112         /* Verify phy id */
 113         switch (hw->mac.type) {
 114         case e1000_82571:
 115         case e1000_82572:
 116                 if (phy->id != IGP01E1000_I_PHY_ID)
 117                         return -E1000_ERR_PHY;
 118                 break;
 119         case e1000_82573:
 120                 if (phy->id != M88E1111_I_PHY_ID)
 121                         return -E1000_ERR_PHY;
 122                 break;
 123         case e1000_82574:
 124                 if (phy->id != BME1000_E_PHY_ID_R2)
 125                         return -E1000_ERR_PHY;
 126                 break;
 127         default:
 128                 return -E1000_ERR_PHY;
 129                 break;
 130         }
 131
 132         return 0;
 133 }
 134
 135 /**
 136  *  e1000_init_nvm_params_82571 - Init NVM func ptrs.
 137  *  @hw: pointer to the HW structure
 138  *
 139  *  This is a function pointer entry point called by the api module.
 140  **/
 141 static s32 e1000_init_nvm_params_82571(struct e1000_hw *hw)
 142 {
 143         struct e1000_nvm_info *nvm = &hw->nvm;
 144         u32 eecd = er32(EECD);
 145         u16 size;
 146
 147         nvm->opcode_bits = 8;
 148         nvm->delay_usec = 1;
 149         switch (nvm->override) {
 150         case e1000_nvm_override_spi_large:
 151                 nvm->page_size = 32;
 152                 nvm->address_bits = 16;
 153                 break;
 154         case e1000_nvm_override_spi_small:
 155                 nvm->page_size = 8;
 156                 nvm->address_bits = 8;
 157                 break;
 158         default:
 159                 nvm->page_size = eecd & E1000_EECD_ADDR_BITS ? 32 : 8;
 160                 nvm->address_bits = eecd & E1000_EECD_ADDR_BITS ? 16 : 8;
 161                 break;
 162         }
 163
 164         switch (hw->mac.type) {
 165         case e1000_82573:
 166         case e1000_82574:
 167                 if (((eecd >> 15) & 0x3) == 0x3) {
 168                         nvm->type = e1000_nvm_flash_hw;
 169                         nvm->word_size = 2048;
 170                         /*
 171                          * Autonomous Flash update bit must be cleared due
 172                          * to Flash update issue.
 173                          */
 174                         eecd &= ~E1000_EECD_AUPDEN;
 175                         ew32(EECD, eecd);
 176                         break;
 177                 }
 178                 /* Fall Through */
 179         default:
 180                 nvm->type = e1000_nvm_eeprom_spi;
 181                 size = (u16)((eecd & E1000_EECD_SIZE_EX_MASK) >>
 182                                   E1000_EECD_SIZE_EX_SHIFT);
 183                 /*
 184                  * Added to a constant, "size" becomes the left-shift value
 185                  * for setting word_size.
 186                  */
 187                 size += NVM_WORD_SIZE_BASE_SHIFT;
 188
 189                 /* EEPROM access above 16k is unsupported */
 190                 if (size > 14)
 191                         size = 14;
 192                 nvm->word_size  = 1 << size;
 193                 break;
 194         }
 195
 196         return 0;
 197 }
 198
 199 /**
 200  *  e1000_init_mac_params_82571 - Init MAC func ptrs.
 201  *  @hw: pointer to the HW structure
 202  *
 203  *  This is a function pointer entry point called by the api module.
 204  **/
 205 static s32 e1000_init_mac_params_82571(struct e1000_adapter *adapter)
 206 {
 207         struct e1000_hw *hw = &adapter->hw;
 208         struct e1000_mac_info *mac = &hw->mac;
 209         struct e1000_mac_operations *func = &mac->ops;
 210
 211         /* Set media type */
 212         switch (adapter->pdev->device) {
 213         case E1000_DEV_ID_82571EB_FIBER:
 214         case E1000_DEV_ID_82572EI_FIBER:
 215         case E1000_DEV_ID_82571EB_QUAD_FIBER:
 216                 hw->phy.media_type = e1000_media_type_fiber;
 217                 break;
 218         case E1000_DEV_ID_82571EB_SERDES:
 219         case E1000_DEV_ID_82572EI_SERDES:
 220         case E1000_DEV_ID_82571EB_SERDES_DUAL:
 221         case E1000_DEV_ID_82571EB_SERDES_QUAD:
 222                 hw->phy.media_type = e1000_media_type_internal_serdes;
 223                 break;
 224         default:
 225                 hw->phy.media_type = e1000_media_type_copper;
 226                 break;
 227         }
 228
 229         /* Set mta register count */
 230         mac->mta_reg_count = 128;
 231         /* Set rar entry count */
 232         mac->rar_entry_count = E1000_RAR_ENTRIES;
 233         /* Set if manageability features are enabled. */
 234         mac->arc_subsystem_valid = (er32(FWSM) & E1000_FWSM_MODE_MASK) ? 1 : 0;
 235
 236         /* check for link */
 237         switch (hw->phy.media_type) {
 238         case e1000_media_type_copper:
 239                 func->setup_physical_interface = e1000_setup_copper_link_82571;
 240                 func->check_for_link = e1000e_check_for_copper_link;
 241                 func->get_link_up_info = e1000e_get_speed_and_duplex_copper;
 242                 break;
 243         case e1000_media_type_fiber:
 244                 func->setup_physical_interface =
 245                         e1000_setup_fiber_serdes_link_82571;
 246                 func->check_for_link = e1000e_check_for_fiber_link;
 247                 func->get_link_up_info =
 248                         e1000e_get_speed_and_duplex_fiber_serdes;
 249                 break;
 250         case e1000_media_type_internal_serdes:
 251                 func->setup_physical_interface =
 252                         e1000_setup_fiber_serdes_link_82571;
 253                 func->check_for_link = e1000e_check_for_serdes_link;
 254                 func->get_link_up_info =
 255                         e1000e_get_speed_and_duplex_fiber_serdes;
 256                 break;
 257         default:
 258                 return -E1000_ERR_CONFIG;
 259                 break;
 260         }
 261
 262         switch (hw->mac.type) {
 263         case e1000_82574:
 264                 func->check_mng_mode = e1000_check_mng_mode_82574;
 265                 func->led_on = e1000_led_on_82574;
 266                 break;
 267         default:
 268                 func->check_mng_mode = e1000e_check_mng_mode_generic;
 269                 func->led_on = e1000e_led_on_generic;
 270                 break;
 271         }
 272
 273         return 0;
 274 }
 275
 276 static s32 e1000_get_variants_82571(struct e1000_adapter *adapter)
 277 {
 278         struct e1000_hw *hw = &adapter->hw;
 279         static int global_quad_port_a; /* global port a indication */
 280         struct pci_dev *pdev = adapter->pdev;
 281         u16 eeprom_data = 0;
 282         int is_port_b = er32(STATUS) & E1000_STATUS_FUNC_1;
 283         s32 rc;
 284
 285         rc = e1000_init_mac_params_82571(adapter);
 286         if (rc)
 287                 return rc;
 288
 289         rc = e1000_init_nvm_params_82571(hw);
 290         if (rc)
 291                 return rc;
 292
 293         rc = e1000_init_phy_params_82571(hw);
 294         if (rc)
 295                 return rc;
 296
 297         /* tag quad port adapters first, it's used below */
 298         switch (pdev->device) {
 299         case E1000_DEV_ID_82571EB_QUAD_COPPER:
 300         case E1000_DEV_ID_82571EB_QUAD_FIBER:
 301         case E1000_DEV_ID_82571EB_QUAD_COPPER_LP:
 302         case E1000_DEV_ID_82571PT_QUAD_COPPER:
 303                 adapter->flags |= FLAG_IS_QUAD_PORT;
 304                 /* mark the first port */
 305                 if (global_quad_port_a == 0)
 306                         adapter->flags |= FLAG_IS_QUAD_PORT_A;
 307                 /* Reset for multiple quad port adapters */
 308                 global_quad_port_a++;
 309                 if (global_quad_port_a == 4)
 310                         global_quad_port_a = 0;
 311                 break;
 312         default:
 313                 break;
 314         }
 315
 316         switch (adapter->hw.mac.type) {
 317         case e1000_82571:
 318                 /* these dual ports don't have WoL on port B at all */
 319                 if (((pdev->device == E1000_DEV_ID_82571EB_FIBER) ||
 320                      (pdev->device == E1000_DEV_ID_82571EB_SERDES) ||
 321                      (pdev->device == E1000_DEV_ID_82571EB_COPPER)) &&
 322                     (is_port_b))
 323                         adapter->flags &= ~FLAG_HAS_WOL;
 324                 /* quad ports only support WoL on port A */
 325                 if (adapter->flags & FLAG_IS_QUAD_PORT &&
 326                     (!(adapter->flags & FLAG_IS_QUAD_PORT_A)))
 327                         adapter->flags &= ~FLAG_HAS_WOL;
 328                 /* Does not support WoL on any port */
 329                 if (pdev->device == E1000_DEV_ID_82571EB_SERDES_QUAD)
 330                         adapter->flags &= ~FLAG_HAS_WOL;
 331                 break;
 332
 333         case e1000_82573:
 334                 if (pdev->device == E1000_DEV_ID_82573L) {
 335                         if (e1000_read_nvm(&adapter->hw, NVM_INIT_3GIO_3, 1,
 336                                        &eeprom_data) < 0)
 337                                 break;
 338                         if (eeprom_data & NVM_WORD1A_ASPM_MASK)
 339                                 adapter->flags &= ~FLAG_HAS_JUMBO_FRAMES;
 340                 }
 341                 break;
 342         default:
 343                 break;
 344         }
 345
 346         return 0;
 347 }
 348
 349 /**
 350  *  e1000_get_phy_id_82571 - Retrieve the PHY ID and revision
 351  *  @hw: pointer to the HW structure
 352  *
 353  *  Reads the PHY registers and stores the PHY ID and possibly the PHY
 354  *  revision in the hardware structure.
 355  **/
 356 static s32 e1000_get_phy_id_82571(struct e1000_hw *hw)
 357 {
 358         struct e1000_phy_info *phy = &hw->phy;
 359         s32 ret_val;
 360         u16 phy_id = 0;
 361
 362         switch (hw->mac.type) {
 363         case e1000_82571:
 364         case e1000_82572:
 365                 /*
 366                  * The 82571 firmware may still be configuring the PHY.
 367                  * In this case, we cannot access the PHY until the
 368                  * configuration is done.  So we explicitly set the
 369                  * PHY ID.
 370                  */
 371                 phy->id = IGP01E1000_I_PHY_ID;
 372                 break;
 373         case e1000_82573:
 374                 return e1000e_get_phy_id(hw);
 375                 break;
 376         case e1000_82574:
 377                 ret_val = e1e_rphy(hw, PHY_ID1, &phy_id);
 378                 if (ret_val)
 379                         return ret_val;
 380
 381                 phy->id = (u32)(phy_id << 16);
 382                 udelay(20);
 383                 ret_val = e1e_rphy(hw, PHY_ID2, &phy_id);
 384                 if (ret_val)
 385                         return ret_val;
 386
 387                 phy->id |= (u32)(phy_id);
 388                 phy->revision = (u32)(phy_id & ~PHY_REVISION_MASK);
 389                 break;
 390         default:
 391                 return -E1000_ERR_PHY;
 392                 break;
 393         }
 394
 395         return 0;
 396 }
 397
 398 /**
 399  *  e1000_get_hw_semaphore_82571 - Acquire hardware semaphore
 400  *  @hw: pointer to the HW structure
 401  *
 402  *  Acquire the HW semaphore to access the PHY or NVM
 403  **/
 404 static s32 e1000_get_hw_semaphore_82571(struct e1000_hw *hw)
 405 {
 406         u32 swsm;
 407         s32 timeout = hw->nvm.word_size + 1;
 408         s32 i = 0;
 409
 410         /* Get the FW semaphore. */
 411         for (i = 0; i < timeout; i++) {
 412                 swsm = er32(SWSM);
 413                 ew32(SWSM, swsm | E1000_SWSM_SWESMBI);
 414
 415                 /* Semaphore acquired if bit latched */
 416                 if (er32(SWSM) & E1000_SWSM_SWESMBI)
 417                         break;
 418
 419                 udelay(50);
 420         }
 421
 422         if (i == timeout) {
 423                 /* Release semaphores */
 424                 e1000e_put_hw_semaphore(hw);
 425                 hw_dbg(hw, "Driver can't access the NVM\n");
 426                 return -E1000_ERR_NVM;
 427         }
 428
 429         return 0;
 430 }
 431
 432 /**
 433  *  e1000_put_hw_semaphore_82571 - Release hardware semaphore
 434  *  @hw: pointer to the HW structure
 435  *
 436  *  Release hardware semaphore used to access the PHY or NVM
 437  **/
 438 static void e1000_put_hw_semaphore_82571(struct e1000_hw *hw)
 439 {
 440         u32 swsm;
 441
 442         swsm = er32(SWSM);
 443
 444         swsm &= ~E1000_SWSM_SWESMBI;
 445
 446         ew32(SWSM, swsm);
 447 }
 448
 449 /**
 450  *  e1000_acquire_nvm_82571 - Request for access to the EEPROM
 451  *  @hw: pointer to the HW structure
 452  *
 453  *  To gain access to the EEPROM, first we must obtain a hardware semaphore.
 454  *  Then for non-82573 hardware, set the EEPROM access request bit and wait
 455  *  for EEPROM access grant bit.  If the access grant bit is not set, release
 456  *  hardware semaphore.
 457  **/
 458 static s32 e1000_acquire_nvm_82571(struct e1000_hw *hw)
 459 {
 460         s32 ret_val;
 461
 462         ret_val = e1000_get_hw_semaphore_82571(hw);
 463         if (ret_val)
 464                 return ret_val;
 465
 466         if (hw->mac.type != e1000_82573 && hw->mac.type != e1000_82574)
 467                 ret_val = e1000e_acquire_nvm(hw);
 468
 469         if (ret_val)
 470                 e1000_put_hw_semaphore_82571(hw);
 471
 472         return ret_val;
 473 }
 474
 475 /**
 476  *  e1000_release_nvm_82571 - Release exclusive access to EEPROM
 477  *  @hw: pointer to the HW structure
 478  *
 479  *  Stop any current commands to the EEPROM and clear the EEPROM request bit.
 480  **/
 481 static void e1000_release_nvm_82571(struct e1000_hw *hw)
 482 {
 483         e1000e_release_nvm(hw);
 484         e1000_put_hw_semaphore_82571(hw);
 485 }
 486
 487 /**
 488  *  e1000_write_nvm_82571 - Write to EEPROM using appropriate interface
 489  *  @hw: pointer to the HW structure
 490  *  @offset: offset within the EEPROM to be written to
 491  *  @words: number of words to write
 492  *  @data: 16 bit word(s) to be written to the EEPROM
 493  *
 494  *  For non-82573 silicon, write data to EEPROM at offset using SPI interface.
 495  *
 496  *  If e1000e_update_nvm_checksum is not called after this function, the
 497  *  EEPROM will most likely contain an invalid checksum.
 498  **/
 499 static s32 e1000_write_nvm_82571(struct e1000_hw *hw, u16 offset, u16 words,
 500                                  u16 *data)
 501 {
 502         s32 ret_val;
 503
 504         switch (hw->mac.type) {
 505         case e1000_82573:
 506         case e1000_82574:
 507                 ret_val = e1000_write_nvm_eewr_82571(hw, offset, words, data);
 508                 break;
 509         case e1000_82571:
 510         case e1000_82572:
 511                 ret_val = e1000e_write_nvm_spi(hw, offset, words, data);
 512                 break;
 513         default:
 514                 ret_val = -E1000_ERR_NVM;
 515                 break;
 516         }
 517
 518         return ret_val;
 519 }
 520
 521 /**
 522  *  e1000_update_nvm_checksum_82571 - Update EEPROM checksum
 523  *  @hw: pointer to the HW structure
 524  *
 525  *  Updates the EEPROM checksum by reading/adding each word of the EEPROM
 526  *  up to the checksum.  Then calculates the EEPROM checksum and writes the
 527  *  value to the EEPROM.
 528  **/
 529 static s32 e1000_update_nvm_checksum_82571(struct e1000_hw *hw)
 530 {
 531         u32 eecd;
 532         s32 ret_val;
 533         u16 i;
 534
 535         ret_val = e1000e_update_nvm_checksum_generic(hw);
 536         if (ret_val)
 537                 return ret_val;
 538
 539         /*
 540          * If our nvm is an EEPROM, then we're done
 541          * otherwise, commit the checksum to the flash NVM.
 542          */
 543         if (hw->nvm.type != e1000_nvm_flash_hw)
 544                 return ret_val;
 545
 546         /* Check for pending operations. */
 547         for (i = 0; i < E1000_FLASH_UPDATES; i++) {
 548                 msleep(1);
 549                 if ((er32(EECD) & E1000_EECD_FLUPD) == 0)
 550                         break;
 551         }
 552
 553         if (i == E1000_FLASH_UPDATES)
 554                 return -E1000_ERR_NVM;
 555
 556         /* Reset the firmware if using STM opcode. */
 557         if ((er32(FLOP) & 0xFF00) == E1000_STM_OPCODE) {
 558                 /*
 559                  * The enabling of and the actual reset must be done
 560                  * in two write cycles.
 561                  */
 562                 ew32(HICR, E1000_HICR_FW_RESET_ENABLE);
 563                 e1e_flush();
 564                 ew32(HICR, E1000_HICR_FW_RESET);
 565         }
 566
 567         /* Commit the write to flash */
 568         eecd = er32(EECD) | E1000_EECD_FLUPD;
 569         ew32(EECD, eecd);
 570
 571         for (i = 0; i < E1000_FLASH_UPDATES; i++) {
 572                 msleep(1);
 573                 if ((er32(EECD) & E1000_EECD_FLUPD) == 0)
 574                         break;
 575         }
 576
 577         if (i == E1000_FLASH_UPDATES)
 578                 return -E1000_ERR_NVM;
 579
 580         return 0;
 581 }
 582
 583 /**
 584  *  e1000_validate_nvm_checksum_82571 - Validate EEPROM checksum
 585  *  @hw: pointer to the HW structure
 586  *
 587  *  Calculates the EEPROM checksum by reading/adding each word of the EEPROM
 588  *  and then verifies that the sum of the EEPROM is equal to 0xBABA.
 589  **/
 590 static s32 e1000_validate_nvm_checksum_82571(struct e1000_hw *hw)
 591 {
 592         if (hw->nvm.type == e1000_nvm_flash_hw)
 593                 e1000_fix_nvm_checksum_82571(hw);
 594
 595         return e1000e_validate_nvm_checksum_generic(hw);
 596 }
 597
 598 /**
 599  *  e1000_write_nvm_eewr_82571 - Write to EEPROM for 82573 silicon
 600  *  @hw: pointer to the HW structure
 601  *  @offset: offset within the EEPROM to be written to
 602  *  @words: number of words to write
 603  *  @data: 16 bit word(s) to be written to the EEPROM
 604  *
 605  *  After checking for invalid values, poll the EEPROM to ensure the previous
 606  *  command has completed before trying to write the next word.  After write
 607  *  poll for completion.
 608  *
 609  *  If e1000e_update_nvm_checksum is not called after this function, the
 610  *  EEPROM will most likely contain an invalid checksum.
 611  **/
 612 static s32 e1000_write_nvm_eewr_82571(struct e1000_hw *hw, u16 offset,
 613                                       u16 words, u16 *data)
 614 {
 615         struct e1000_nvm_info *nvm = &hw->nvm;
 616         u32 i;
 617         u32 eewr = 0;
 618         s32 ret_val = 0;
 619
 620         /*
 621          * A check for invalid values:  offset too large, too many words,
 622          * and not enough words.
 623          */
 624         if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) ||
 625             (words == 0)) {
 626                 hw_dbg(hw, "nvm parameter(s) out of bounds\n");
 627                 return -E1000_ERR_NVM;
 628         }
 629
 630         for (i = 0; i < words; i++) {
 631                 eewr = (data[i] << E1000_NVM_RW_REG_DATA) |
 632                        ((offset+i) << E1000_NVM_RW_ADDR_SHIFT) |
 633                        E1000_NVM_RW_REG_START;
 634
 635                 ret_val = e1000e_poll_eerd_eewr_done(hw, E1000_NVM_POLL_WRITE);
 636                 if (ret_val)
 637                         break;
 638
 639                 ew32(EEWR, eewr);
 640
 641                 ret_val = e1000e_poll_eerd_eewr_done(hw, E1000_NVM_POLL_WRITE);
 642                 if (ret_val)
 643                         break;
 644         }
 645
 646         return ret_val;
 647 }
 648
 649 /**
 650  *  e1000_get_cfg_done_82571 - Poll for configuration done
 651  *  @hw: pointer to the HW structure
 652  *
 653  *  Reads the management control register for the config done bit to be set.
 654  **/
 655 static s32 e1000_get_cfg_done_82571(struct e1000_hw *hw)
 656 {
 657         s32 timeout = PHY_CFG_TIMEOUT;
 658
 659         while (timeout) {
 660                 if (er32(EEMNGCTL) &
 661                     E1000_NVM_CFG_DONE_PORT_0)
 662                         break;
 663                 msleep(1);
 664                 timeout--;
 665         }
 666         if (!timeout) {
 667                 hw_dbg(hw, "MNG configuration cycle has not completed.\n");
 668                 return -E1000_ERR_RESET;
 669         }
 670
 671         return 0;
 672 }
 673
 674 /**
 675  *  e1000_set_d0_lplu_state_82571 - Set Low Power Linkup D0 state
 676  *  @hw: pointer to the HW structure
 677  *  @active: TRUE to enable LPLU, FALSE to disable
 678  *
 679  *  Sets the LPLU D0 state according to the active flag.  When activating LPLU
 680  *  this function also disables smart speed and vice versa.  LPLU will not be
 681  *  activated unless the device autonegotiation advertisement meets standards
 682  *  of either 10 or 10/100 or 10/100/1000 at all duplexes.  This is a function
 683  *  pointer entry point only called by PHY setup routines.
 684  **/
 685 static s32 e1000_set_d0_lplu_state_82571(struct e1000_hw *hw, bool active)
 686 {
 687         struct e1000_phy_info *phy = &hw->phy;
 688         s32 ret_val;
 689         u16 data;
 690
 691         ret_val = e1e_rphy(hw, IGP02E1000_PHY_POWER_MGMT, &data);
 692         if (ret_val)
 693                 return ret_val;
 694
 695         if (active) {
 696                 data |= IGP02E1000_PM_D0_LPLU;
 697                 ret_val = e1e_wphy(hw, IGP02E1000_PHY_POWER_MGMT, data);
 698                 if (ret_val)
 699                         return ret_val;
 700
 701                 /* When LPLU is enabled, we should disable SmartSpeed */
 702                 ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG, &data);
 703                 data &= ~IGP01E1000_PSCFR_SMART_SPEED;
 704                 ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG, data);
 705                 if (ret_val)
 706                         return ret_val;
 707         } else {
 708                 data &= ~IGP02E1000_PM_D0_LPLU;
 709                 ret_val = e1e_wphy(hw, IGP02E1000_PHY_POWER_MGMT, data);
 710                 /*
 711                  * LPLU and SmartSpeed are mutually exclusive.  LPLU is used
 712                  * during Dx states where the power conservation is most
 713                  * important.  During driver activity we should enable
 714                  * SmartSpeed, so performance is maintained.
 715                  */
 716                 if (phy->smart_speed == e1000_smart_speed_on) {
 717                         ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG,
 718                                            &data);
 719                         if (ret_val)
 720                                 return ret_val;
 721
 722                         data |= IGP01E1000_PSCFR_SMART_SPEED;
 723                         ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG,
 724                                            data);
 725                         if (ret_val)
 726                                 return ret_val;
 727                 } else if (phy->smart_speed == e1000_smart_speed_off) {
 728                         ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG,
 729                                            &data);
 730                         if (ret_val)
 731                                 return ret_val;
 732
 733                         data &= ~IGP01E1000_PSCFR_SMART_SPEED;
 734                         ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG,
 735                                            data);
 736                         if (ret_val)
 737                                 return ret_val;
 738                 }
 739         }
 740
 741         return 0;
 742 }
 743
 744 /**
 745  *  e1000_reset_hw_82571 - Reset hardware
 746  *  @hw: pointer to the HW structure
 747  *
 748  *  This resets the hardware into a known state.  This is a
 749  *  function pointer entry point called by the api module.
 750  **/
 751 static s32 e1000_reset_hw_82571(struct e1000_hw *hw)
 752 {
 753         u32 ctrl;
 754         u32 extcnf_ctrl;
 755         u32 ctrl_ext;
 756         u32 icr;
 757         s32 ret_val;
 758         u16 i = 0;
 759
 760         /*
 761          * Prevent the PCI-E bus from sticking if there is no TLP connection
 762          * on the last TLP read/write transaction when MAC is reset.
 763          */
 764         ret_val = e1000e_disable_pcie_master(hw);
 765         if (ret_val)
 766                 hw_dbg(hw, "PCI-E Master disable polling has failed.\n");
 767
 768         hw_dbg(hw, "Masking off all interrupts\n");
 769         ew32(IMC, 0xffffffff);
 770
 771         ew32(RCTL, 0);
 772         ew32(TCTL, E1000_TCTL_PSP);
 773         e1e_flush();
 774
 775         msleep(10);
 776
 777         /*
 778          * Must acquire the MDIO ownership before MAC reset.
 779          * Ownership defaults to firmware after a reset.
 780          */
 781         if (hw->mac.type == e1000_82573 || hw->mac.type == e1000_82574) {
 782                 extcnf_ctrl = er32(EXTCNF_CTRL);
 783                 extcnf_ctrl |= E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP;
 784
 785                 do {
 786                         ew32(EXTCNF_CTRL, extcnf_ctrl);
 787                         extcnf_ctrl = er32(EXTCNF_CTRL);
 788
 789                         if (extcnf_ctrl & E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP)
 790                                 break;
 791
 792                         extcnf_ctrl |= E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP;
 793
 794                         msleep(2);
 795                         i++;
 796                 } while (i < MDIO_OWNERSHIP_TIMEOUT);
 797         }
 798
 799         ctrl = er32(CTRL);
 800
 801         hw_dbg(hw, "Issuing a global reset to MAC\n");
 802         ew32(CTRL, ctrl | E1000_CTRL_RST);
 803
 804         if (hw->nvm.type == e1000_nvm_flash_hw) {
 805                 udelay(10);
 806                 ctrl_ext = er32(CTRL_EXT);
 807                 ctrl_ext |= E1000_CTRL_EXT_EE_RST;
 808                 ew32(CTRL_EXT, ctrl_ext);
 809                 e1e_flush();
 810         }
 811
 812         ret_val = e1000e_get_auto_rd_done(hw);
 813         if (ret_val)
 814                 /* We don't want to continue accessing MAC registers. */
 815                 return ret_val;
 816
 817         /*
 818          * Phy configuration from NVM just starts after EECD_AUTO_RD is set.
 819          * Need to wait for Phy configuration completion before accessing
 820          * NVM and Phy.
 821          */
 822         if (hw->mac.type == e1000_82573 || hw->mac.type == e1000_82574)
 823                 msleep(25);
 824
 825         /* Clear any pending interrupt events. */
 826         ew32(IMC, 0xffffffff);
 827         icr = er32(ICR);
 828
 829         if (hw->mac.type == e1000_82571 &&
 830                 hw->dev_spec.e82571.alt_mac_addr_is_present)
 831                         e1000e_set_laa_state_82571(hw, true);
 832
 833         return 0;
 834 }
 835
 836 /**
 837  *  e1000_init_hw_82571 - Initialize hardware
 838  *  @hw: pointer to the HW structure
 839  *
 840  *  This inits the hardware readying it for operation.
 841  **/
 842 static s32 e1000_init_hw_82571(struct e1000_hw *hw)
 843 {
 844         struct e1000_mac_info *mac = &hw->mac;
 845         u32 reg_data;
 846         s32 ret_val;
 847         u16 i;
 848         u16 rar_count = mac->rar_entry_count;
 849
 850         e1000_initialize_hw_bits_82571(hw);
 851
 852         /* Initialize identification LED */
 853         ret_val = e1000e_id_led_init(hw);
 854         if (ret_val) {
 855                 hw_dbg(hw, "Error initializing identification LED\n");
 856                 return ret_val;
 857         }
 858
 859         /* Disabling VLAN filtering */
 860         hw_dbg(hw, "Initializing the IEEE VLAN\n");
 861         e1000e_clear_vfta(hw);
 862
 863         /* Setup the receive address. */
 864         /*
 865          * If, however, a locally administered address was assigned to the
 866          * 82571, we must reserve a RAR for it to work around an issue where
 867          * resetting one port will reload the MAC on the other port.
 868          */
 869         if (e1000e_get_laa_state_82571(hw))
 870                 rar_count--;
 871         e1000e_init_rx_addrs(hw, rar_count);
 872
 873         /* Zero out the Multicast HASH table */
 874         hw_dbg(hw, "Zeroing the MTA\n");
 875         for (i = 0; i < mac->mta_reg_count; i++)
 876                 E1000_WRITE_REG_ARRAY(hw, E1000_MTA, i, 0);
 877
 878         /* Setup link and flow control */
 879         ret_val = e1000_setup_link_82571(hw);
 880
 881         /* Set the transmit descriptor write-back policy */
 882         reg_data = er32(TXDCTL(0));
 883         reg_data = (reg_data & ~E1000_TXDCTL_WTHRESH) |
 884                    E1000_TXDCTL_FULL_TX_DESC_WB |
 885                    E1000_TXDCTL_COUNT_DESC;
 886         ew32(TXDCTL(0), reg_data);
 887
 888         /* ...for both queues. */
 889         if (mac->type != e1000_82573 && mac->type != e1000_82574) {
 890                 reg_data = er32(TXDCTL(1));
 891                 reg_data = (reg_data & ~E1000_TXDCTL_WTHRESH) |
 892                            E1000_TXDCTL_FULL_TX_DESC_WB |
 893                            E1000_TXDCTL_COUNT_DESC;
 894                 ew32(TXDCTL(1), reg_data);
 895         } else {
 896                 e1000e_enable_tx_pkt_filtering(hw);
 897                 reg_data = er32(GCR);
 898                 reg_data |= E1000_GCR_L1_ACT_WITHOUT_L0S_RX;
 899                 ew32(GCR, reg_data);
 900         }
 901
 902         /*
 903          * Clear all of the statistics registers (clear on read).  It is
 904          * important that we do this after we have tried to establish link
 905          * because the symbol error count will increment wildly if there
 906          * is no link.
 907          */
 908         e1000_clear_hw_cntrs_82571(hw);
 909
 910         return ret_val;
 911 }
 912
 913 /**
 914  *  e1000_initialize_hw_bits_82571 - Initialize hardware-dependent bits
 915  *  @hw: pointer to the HW structure
 916  *
 917  *  Initializes required hardware-dependent bits needed for normal operation.
 918  **/
 919 static void e1000_initialize_hw_bits_82571(struct e1000_hw *hw)
 920 {
 921         u32 reg;
 922
 923         /* Transmit Descriptor Control 0 */
 924         reg = er32(TXDCTL(0));
 925         reg |= (1 << 22);
 926         ew32(TXDCTL(0), reg);
 927
 928         /* Transmit Descriptor Control 1 */
 929         reg = er32(TXDCTL(1));
 930         reg |= (1 << 22);
 931         ew32(TXDCTL(1), reg);
 932
 933         /* Transmit Arbitration Control 0 */
 934         reg = er32(TARC(0));
 935         reg &= ~(0xF << 27); /* 30:27 */
 936         switch (hw->mac.type) {
 937         case e1000_82571:
 938         case e1000_82572:
 939                 reg |= (1 << 23) | (1 << 24) | (1 << 25) | (1 << 26);
 940                 break;
 941         default:
 942                 break;
 943         }
 944         ew32(TARC(0), reg);
 945
 946         /* Transmit Arbitration Control 1 */
 947         reg = er32(TARC(1));
 948         switch (hw->mac.type) {
 949         case e1000_82571:
 950         case e1000_82572:
 951                 reg &= ~((1 << 29) | (1 << 30));
 952                 reg |= (1 << 22) | (1 << 24) | (1 << 25) | (1 << 26);
 953                 if (er32(TCTL) & E1000_TCTL_MULR)
 954                         reg &= ~(1 << 28);
 955                 else
 956                         reg |= (1 << 28);
 957                 ew32(TARC(1), reg);
 958                 break;
 959         default:
 960                 break;
 961         }
 962
 963         /* Device Control */
 964         if (hw->mac.type == e1000_82573 || hw->mac.type == e1000_82574) {
 965                 reg = er32(CTRL);
 966                 reg &= ~(1 << 29);
 967                 ew32(CTRL, reg);
 968         }
 969
 970         /* Extended Device Control */
 971         if (hw->mac.type == e1000_82573 || hw->mac.type == e1000_82574) {
 972                 reg = er32(CTRL_EXT);
 973                 reg &= ~(1 << 23);
 974                 reg |= (1 << 22);
 975                 ew32(CTRL_EXT, reg);
 976         }
 977
 978         if (hw->mac.type == e1000_82571) {
 979                 reg = er32(PBA_ECC);
 980                 reg |= E1000_PBA_ECC_CORR_EN;
 981                 ew32(PBA_ECC, reg);
 982         }
 983
 984         /* PCI-Ex Control Registers */
 985         if (hw->mac.type == e1000_82574) {
 986                 reg = er32(GCR);
 987                 reg |= (1 << 22);
 988                 ew32(GCR, reg);
 989
 990                 reg = er32(GCR2);
 991                 reg |= 1;
 992                 ew32(GCR2, reg);
 993         }
 994
 995         return;
 996 }
 997
 998 /**
 999  *  e1000e_clear_vfta - Clear VLAN filter table
1000  *  @hw: pointer to the HW structure
1001  *
1002  *  Clears the register array which contains the VLAN filter table by
1003  *  setting all the values to 0.
1004  **/
1005 void e1000e_clear_vfta(struct e1000_hw *hw)
1006 {
1007         u32 offset;
1008         u32 vfta_value = 0;
1009         u32 vfta_offset = 0;
1010         u32 vfta_bit_in_reg = 0;
1011
1012         if (hw->mac.type == e1000_82573 || hw->mac.type == e1000_82574) {
1013                 if (hw->mng_cookie.vlan_id != 0) {
1014                         /*
1015                          * The VFTA is a 4096b bit-field, each identifying
1016                          * a single VLAN ID.  The following operations
1017                          * determine which 32b entry (i.e. offset) into the
1018                          * array we want to set the VLAN ID (i.e. bit) of
1019                          * the manageability unit.
1020                          */
1021                         vfta_offset = (hw->mng_cookie.vlan_id >>
1022                                        E1000_VFTA_ENTRY_SHIFT) &
1023                                       E1000_VFTA_ENTRY_MASK;
1024                         vfta_bit_in_reg = 1 << (hw->mng_cookie.vlan_id &
1025                                                E1000_VFTA_ENTRY_BIT_SHIFT_MASK);
1026                 }
1027         }
1028         for (offset = 0; offset < E1000_VLAN_FILTER_TBL_SIZE; offset++) {
1029                 /*
1030                  * If the offset we want to clear is the same offset of the
1031                  * manageability VLAN ID, then clear all bits except that of
1032                  * the manageability unit.
1033                  */
1034                 vfta_value = (offset == vfta_offset) ? vfta_bit_in_reg : 0;
1035                 E1000_WRITE_REG_ARRAY(hw, E1000_VFTA, offset, vfta_value);
1036                 e1e_flush();
1037         }
1038 }
1039
1040 /**
1041  *  e1000_check_mng_mode_82574 - Check manageability is enabled
1042  *  @hw: pointer to the HW structure
1043  *
1044  *  Reads the NVM Initialization Control Word 2 and returns true
1045  *  (>0) if any manageability is enabled, else false (0).
1046  **/
1047 static bool e1000_check_mng_mode_82574(struct e1000_hw *hw)
1048 {
1049         u16 data;
1050
1051         e1000_read_nvm(hw, NVM_INIT_CONTROL2_REG, 1, &data);
1052         return (data & E1000_NVM_INIT_CTRL2_MNGM) != 0;
1053 }
1054
1055 /**
1056  *  e1000_led_on_82574 - Turn LED on
1057  *  @hw: pointer to the HW structure
1058  *
1059  *  Turn LED on.
1060  **/
1061 static s32 e1000_led_on_82574(struct e1000_hw *hw)
1062 {
1063         u32 ctrl;
1064         u32 i;
1065
1066         ctrl = hw->mac.ledctl_mode2;
1067         if (!(E1000_STATUS_LU & er32(STATUS))) {
1068                 /*
1069                  * If no link, then turn LED on by setting the invert bit
1070                  * for each LED that's "on" (0x0E) in ledctl_mode2.
1071                  */
1072                 for (i = 0; i < 4; i++)
1073                         if (((hw->mac.ledctl_mode2 >> (i * 8)) & 0xFF) ==
1074                             E1000_LEDCTL_MODE_LED_ON)
1075                                 ctrl |= (E1000_LEDCTL_LED0_IVRT << (i * 8));
1076         }
1077         ew32(LEDCTL, ctrl);
1078
1079         return 0;
1080 }
1081
1082 /**
1083  *  e1000_update_mc_addr_list_82571 - Update Multicast addresses
1084  *  @hw: pointer to the HW structure
1085  *  @mc_addr_list: array of multicast addresses to program
1086  *  @mc_addr_count: number of multicast addresses to program
1087  *  @rar_used_count: the first RAR register free to program
1088  *  @rar_count: total number of supported Receive Address Registers
1089  *
1090  *  Updates the Receive Address Registers and Multicast Table Array.
1091  *  The caller must have a packed mc_addr_list of multicast addresses.
1092  *  The parameter rar_count will usually be hw->mac.rar_entry_count
1093  *  unless there are workarounds that change this.
1094  **/
1095 static void e1000_update_mc_addr_list_82571(struct e1000_hw *hw,
1096                                             u8 *mc_addr_list,
1097                                             u32 mc_addr_count,
1098                                             u32 rar_used_count,
1099                                             u32 rar_count)
1100 {
1101         if (e1000e_get_laa_state_82571(hw))
1102                 rar_count--;
1103
1104         e1000e_update_mc_addr_list_generic(hw, mc_addr_list, mc_addr_count,
1105                                            rar_used_count, rar_count);
1106 }
1107
1108 /**
1109  *  e1000_setup_link_82571 - Setup flow control and link settings
1110  *  @hw: pointer to the HW structure
1111  *
1112  *  Determines which flow control settings to use, then configures flow
1113  *  control.  Calls the appropriate media-specific link configuration
1114  *  function.  Assuming the adapter has a valid link partner, a valid link
1115  *  should be established.  Assumes the hardware has previously been reset
1116  *  and the transmitter and receiver are not enabled.
1117  **/
1118 static s32 e1000_setup_link_82571(struct e1000_hw *hw)
1119 {
1120         /*
1121          * 82573 does not have a word in the NVM to determine
1122          * the default flow control setting, so we explicitly
1123          * set it to full.
1124          */
1125         if ((hw->mac.type == e1000_82573 || hw->mac.type == e1000_82574) &&
1126             hw->fc.requested_mode == e1000_fc_default)
1127                 hw->fc.requested_mode = e1000_fc_full;
1128
1129         return e1000e_setup_link(hw);
1130 }
1131
1132 /**
1133  *  e1000_setup_copper_link_82571 - Configure copper link settings
1134  *  @hw: pointer to the HW structure
1135  *
1136  *  Configures the link for auto-neg or forced speed and duplex.  Then we check
1137  *  for link, once link is established calls to configure collision distance
1138  *  and flow control are called.
1139  **/
1140 static s32 e1000_setup_copper_link_82571(struct e1000_hw *hw)
1141 {
1142         u32 ctrl;
1143         u32 led_ctrl;
1144         s32 ret_val;
1145
1146         ctrl = er32(CTRL);
1147         ctrl |= E1000_CTRL_SLU;
1148         ctrl &= ~(E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX);
1149         ew32(CTRL, ctrl);
1150
1151         switch (hw->phy.type) {
1152         case e1000_phy_m88:
1153         case e1000_phy_bm:
1154                 ret_val = e1000e_copper_link_setup_m88(hw);
1155                 break;
1156         case e1000_phy_igp_2:
1157                 ret_val = e1000e_copper_link_setup_igp(hw);
1158                 /* Setup activity LED */
1159                 led_ctrl = er32(LEDCTL);
1160                 led_ctrl &= IGP_ACTIVITY_LED_MASK;
1161                 led_ctrl |= (IGP_ACTIVITY_LED_ENABLE | IGP_LED3_MODE);
1162                 ew32(LEDCTL, led_ctrl);
1163                 break;
1164         default:
1165                 return -E1000_ERR_PHY;
1166                 break;
1167         }
1168
1169         if (ret_val)
1170                 return ret_val;
1171
1172         ret_val = e1000e_setup_copper_link(hw);
1173
1174         return ret_val;
1175 }
1176
1177 /**
1178  *  e1000_setup_fiber_serdes_link_82571 - Setup link for fiber/serdes
1179  *  @hw: pointer to the HW structure
1180  *
1181  *  Configures collision distance and flow control for fiber and serdes links.
1182  *  Upon successful setup, poll for link.
1183  **/
1184 static s32 e1000_setup_fiber_serdes_link_82571(struct e1000_hw *hw)
1185 {
1186         switch (hw->mac.type) {
1187         case e1000_82571:
1188         case e1000_82572:
1189                 /*
1190                  * If SerDes loopback mode is entered, there is no form
1191                  * of reset to take the adapter out of that mode.  So we
1192                  * have to explicitly take the adapter out of loopback
1193                  * mode.  This prevents drivers from twiddling their thumbs
1194                  * if another tool failed to take it out of loopback mode.
1195                  */
1196                 ew32(SCTL, E1000_SCTL_DISABLE_SERDES_LOOPBACK);
1197                 break;
1198         default:
1199                 break;
1200         }
1201
1202         return e1000e_setup_fiber_serdes_link(hw);
1203 }
1204
1205 /**
1206  *  e1000_valid_led_default_82571 - Verify a valid default LED config
1207  *  @hw: pointer to the HW structure
1208  *  @data: pointer to the NVM (EEPROM)
1209  *
1210  *  Read the EEPROM for the current default LED configuration.  If the
1211  *  LED configuration is not valid, set to a valid LED configuration.
1212  **/
1213 static s32 e1000_valid_led_default_82571(struct e1000_hw *hw, u16 *data)
1214 {
1215         s32 ret_val;
1216
1217         ret_val = e1000_read_nvm(hw, NVM_ID_LED_SETTINGS, 1, data);
1218         if (ret_val) {
1219                 hw_dbg(hw, "NVM Read Error\n");
1220                 return ret_val;
1221         }
1222
1223         if ((hw->mac.type == e1000_82573 || hw->mac.type == e1000_82574) &&
1224             *data == ID_LED_RESERVED_F746)
1225                 *data = ID_LED_DEFAULT_82573;
1226         else if (*data == ID_LED_RESERVED_0000 || *data == ID_LED_RESERVED_FFFF)
1227                 *data = ID_LED_DEFAULT;
1228
1229         return 0;
1230 }
1231
1232 /**
1233  *  e1000e_get_laa_state_82571 - Get locally administered address state
1234  *  @hw: pointer to the HW structure
1235  *
1236  *  Retrieve and return the current locally administered address state.
1237  **/
1238 bool e1000e_get_laa_state_82571(struct e1000_hw *hw)
1239 {
1240         if (hw->mac.type != e1000_82571)
1241                 return 0;
1242
1243         return hw->dev_spec.e82571.laa_is_present;
1244 }
1245
1246 /**
1247  *  e1000e_set_laa_state_82571 - Set locally administered address state
1248  *  @hw: pointer to the HW structure
1249  *  @state: enable/disable locally administered address
1250  *
1251  *  Enable/Disable the current locally administers address state.
1252  **/
1253 void e1000e_set_laa_state_82571(struct e1000_hw *hw, bool state)
1254 {
1255         if (hw->mac.type != e1000_82571)
1256                 return;
1257
1258         hw->dev_spec.e82571.laa_is_present = state;
1259
1260         /* If workaround is activated... */
1261         if (state)
1262                 /*
1263                  * Hold a copy of the LAA in RAR[14] This is done so that
1264                  * between the time RAR[0] gets clobbered and the time it
1265                  * gets fixed, the actual LAA is in one of the RARs and no
1266                  * incoming packets directed to this port are dropped.
1267                  * Eventually the LAA will be in RAR[0] and RAR[14].
1268                  */
1269                 e1000e_rar_set(hw, hw->mac.addr, hw->mac.rar_entry_count - 1);
1270 }
1271
1272 /**
1273  *  e1000_fix_nvm_checksum_82571 - Fix EEPROM checksum
1274  *  @hw: pointer to the HW structure
1275  *
1276  *  Verifies that the EEPROM has completed the update.  After updating the
1277  *  EEPROM, we need to check bit 15 in work 0x23 for the checksum fix.  If
1278  *  the checksum fix is not implemented, we need to set the bit and update
1279  *  the checksum.  Otherwise, if bit 15 is set and the checksum is incorrect,
1280  *  we need to return bad checksum.
1281  **/
1282 static s32 e1000_fix_nvm_checksum_82571(struct e1000_hw *hw)
1283 {
1284         struct e1000_nvm_info *nvm = &hw->nvm;
1285         s32 ret_val;
1286         u16 data;
1287
1288         if (nvm->type != e1000_nvm_flash_hw)
1289                 return 0;
1290
1291         /*
1292          * Check bit 4 of word 10h.  If it is 0, firmware is done updating
1293          * 10h-12h.  Checksum may need to be fixed.
1294          */
1295         ret_val = e1000_read_nvm(hw, 0x10, 1, &data);
1296         if (ret_val)
1297                 return ret_val;
1298
1299         if (!(data & 0x10)) {
1300                 /*
1301                  * Read 0x23 and check bit 15.  This bit is a 1
1302                  * when the checksum has already been fixed.  If
1303                  * the checksum is still wrong and this bit is a
1304                  * 1, we need to return bad checksum.  Otherwise,
1305                  * we need to set this bit to a 1 and update the
1306                  * checksum.
1307                  */
1308                 ret_val = e1000_read_nvm(hw, 0x23, 1, &data);
1309                 if (ret_val)
1310                         return ret_val;
1311
1312                 if (!(data & 0x8000)) {
1313                         data |= 0x8000;
1314                         ret_val = e1000_write_nvm(hw, 0x23, 1, &data);
1315                         if (ret_val)
1316                                 return ret_val;
1317                         ret_val = e1000e_update_nvm_checksum(hw);
1318                 }
1319         }
1320
1321         return 0;
1322 }
1323
1324 /**
1325  *  e1000_clear_hw_cntrs_82571 - Clear device specific hardware counters
1326  *  @hw: pointer to the HW structure
1327  *
1328  *  Clears the hardware counters by reading the counter registers.
1329  **/
1330 static void e1000_clear_hw_cntrs_82571(struct e1000_hw *hw)
1331 {
1332         u32 temp;
1333
1334         e1000e_clear_hw_cntrs_base(hw);
1335
1336         temp = er32(PRC64);
1337         temp = er32(PRC127);
1338         temp = er32(PRC255);
1339         temp = er32(PRC511);
1340         temp = er32(PRC1023);
1341         temp = er32(PRC1522);
1342         temp = er32(PTC64);
1343         temp = er32(PTC127);
1344         temp = er32(PTC255);
1345         temp = er32(PTC511);
1346         temp = er32(PTC1023);
1347         temp = er32(PTC1522);
1348
1349         temp = er32(ALGNERRC);
1350         temp = er32(RXERRC);
1351         temp = er32(TNCRS);
1352         temp = er32(CEXTERR);
1353         temp = er32(TSCTC);
1354         temp = er32(TSCTFC);
1355
1356         temp = er32(MGTPRC);
1357         temp = er32(MGTPDC);
1358         temp = er32(MGTPTC);
1359
1360         temp = er32(IAC);
1361         temp = er32(ICRXOC);
1362
1363         temp = er32(ICRXPTC);
1364         temp = er32(ICRXATC);
1365         temp = er32(ICTXPTC);
1366         temp = er32(ICTXATC);
1367         temp = er32(ICTXQEC);
1368         temp = er32(ICTXQMTC);
1369         temp = er32(ICRXDMTC);
1370 }
1371
1372 static struct e1000_mac_operations e82571_mac_ops = {
1373         /* .check_mng_mode: mac type dependent */
1374         /* .check_for_link: media type dependent */
1375         .cleanup_led            = e1000e_cleanup_led_generic,
1376         .clear_hw_cntrs         = e1000_clear_hw_cntrs_82571,
1377         .get_bus_info           = e1000e_get_bus_info_pcie,
1378         /* .get_link_up_info: media type dependent */
1379         /* .led_on: mac type dependent */
1380         .led_off                = e1000e_led_off_generic,
1381         .update_mc_addr_list    = e1000_update_mc_addr_list_82571,
1382         .reset_hw               = e1000_reset_hw_82571,
1383         .init_hw                = e1000_init_hw_82571,
1384         .setup_link             = e1000_setup_link_82571,
1385         /* .setup_physical_interface: media type dependent */
1386 };
1387
1388 static struct e1000_phy_operations e82_phy_ops_igp = {
1389         .acquire_phy            = e1000_get_hw_semaphore_82571,
1390         .check_reset_block      = e1000e_check_reset_block_generic,
1391         .commit_phy             = NULL,
1392         .force_speed_duplex     = e1000e_phy_force_speed_duplex_igp,
1393         .get_cfg_done           = e1000_get_cfg_done_82571,
1394         .get_cable_length       = e1000e_get_cable_length_igp_2,
1395         .get_phy_info           = e1000e_get_phy_info_igp,
1396         .read_phy_reg           = e1000e_read_phy_reg_igp,
1397         .release_phy            = e1000_put_hw_semaphore_82571,
1398         .reset_phy              = e1000e_phy_hw_reset_generic,
1399         .set_d0_lplu_state      = e1000_set_d0_lplu_state_82571,
1400         .set_d3_lplu_state      = e1000e_set_d3_lplu_state,
1401         .write_phy_reg          = e1000e_write_phy_reg_igp,
1402         .cfg_on_link_up         = NULL,
1403 };
1404
1405 static struct e1000_phy_operations e82_phy_ops_m88 = {
1406         .acquire_phy            = e1000_get_hw_semaphore_82571,
1407         .check_reset_block      = e1000e_check_reset_block_generic,
1408         .commit_phy             = e1000e_phy_sw_reset,
1409         .force_speed_duplex     = e1000e_phy_force_speed_duplex_m88,
1410         .get_cfg_done           = e1000e_get_cfg_done,
1411         .get_cable_length       = e1000e_get_cable_length_m88,
1412         .get_phy_info           = e1000e_get_phy_info_m88,
1413         .read_phy_reg           = e1000e_read_phy_reg_m88,
1414         .release_phy            = e1000_put_hw_semaphore_82571,
1415         .reset_phy              = e1000e_phy_hw_reset_generic,
1416         .set_d0_lplu_state      = e1000_set_d0_lplu_state_82571,
1417         .set_d3_lplu_state      = e1000e_set_d3_lplu_state,
1418         .write_phy_reg          = e1000e_write_phy_reg_m88,
1419         .cfg_on_link_up         = NULL,
1420 };
1421
1422 static struct e1000_phy_operations e82_phy_ops_bm = {
1423         .acquire_phy            = e1000_get_hw_semaphore_82571,
1424         .check_reset_block      = e1000e_check_reset_block_generic,
1425         .commit_phy             = e1000e_phy_sw_reset,
1426         .force_speed_duplex     = e1000e_phy_force_speed_duplex_m88,
1427         .get_cfg_done           = e1000e_get_cfg_done,
1428         .get_cable_length       = e1000e_get_cable_length_m88,
1429         .get_phy_info           = e1000e_get_phy_info_m88,
1430         .read_phy_reg           = e1000e_read_phy_reg_bm2,
1431         .release_phy            = e1000_put_hw_semaphore_82571,
1432         .reset_phy              = e1000e_phy_hw_reset_generic,
1433         .set_d0_lplu_state      = e1000_set_d0_lplu_state_82571,
1434         .set_d3_lplu_state      = e1000e_set_d3_lplu_state,
1435         .write_phy_reg          = e1000e_write_phy_reg_bm2,
1436         .cfg_on_link_up         = NULL,
1437 };
1438
1439 static struct e1000_nvm_operations e82571_nvm_ops = {
1440         .acquire_nvm            = e1000_acquire_nvm_82571,
1441         .read_nvm               = e1000e_read_nvm_eerd,
1442         .release_nvm            = e1000_release_nvm_82571,
1443         .update_nvm             = e1000_update_nvm_checksum_82571,
1444         .valid_led_default      = e1000_valid_led_default_82571,
1445         .validate_nvm           = e1000_validate_nvm_checksum_82571,
1446         .write_nvm              = e1000_write_nvm_82571,
1447 };
1448
1449 struct e1000_info e1000_82571_info = {
1450         .mac                    = e1000_82571,
1451         .flags                  = FLAG_HAS_HW_VLAN_FILTER
1452                                   | FLAG_HAS_JUMBO_FRAMES
1453                                   | FLAG_HAS_WOL
1454                                   | FLAG_APME_IN_CTRL3
1455                                   | FLAG_RX_CSUM_ENABLED
1456                                   | FLAG_HAS_CTRLEXT_ON_LOAD
1457                                   | FLAG_HAS_SMART_POWER_DOWN
1458                                   | FLAG_RESET_OVERWRITES_LAA /* errata */
1459                                   | FLAG_TARC_SPEED_MODE_BIT /* errata */
1460                                   | FLAG_APME_CHECK_PORT_B,
1461         .pba                    = 38,
1462         .get_variants           = e1000_get_variants_82571,
1463         .mac_ops                = &e82571_mac_ops,
1464         .phy_ops                = &e82_phy_ops_igp,
1465         .nvm_ops                = &e82571_nvm_ops,
1466 };
1467
1468 struct e1000_info e1000_82572_info = {
1469         .mac                    = e1000_82572,
1470         .flags                  = FLAG_HAS_HW_VLAN_FILTER
1471                                   | FLAG_HAS_JUMBO_FRAMES
1472                                   | FLAG_HAS_WOL
1473                                   | FLAG_APME_IN_CTRL3
1474                                   | FLAG_RX_CSUM_ENABLED
1475                                   | FLAG_HAS_CTRLEXT_ON_LOAD
1476                                   | FLAG_TARC_SPEED_MODE_BIT, /* errata */
1477         .pba                    = 38,
1478         .get_variants           = e1000_get_variants_82571,
1479         .mac_ops                = &e82571_mac_ops,
1480         .phy_ops                = &e82_phy_ops_igp,
1481         .nvm_ops                = &e82571_nvm_ops,
1482 };
1483
1484 struct e1000_info e1000_82573_info = {
1485         .mac                    = e1000_82573,
1486         .flags                  = FLAG_HAS_HW_VLAN_FILTER
1487                                   | FLAG_HAS_JUMBO_FRAMES
1488                                   | FLAG_HAS_WOL
1489                                   | FLAG_APME_IN_CTRL3
1490                                   | FLAG_RX_CSUM_ENABLED
1491                                   | FLAG_HAS_SMART_POWER_DOWN
1492                                   | FLAG_HAS_AMT
1493                                   | FLAG_HAS_ERT
1494                                   | FLAG_HAS_SWSM_ON_LOAD,
1495         .pba                    = 20,
1496         .get_variants           = e1000_get_variants_82571,
1497         .mac_ops                = &e82571_mac_ops,
1498         .phy_ops                = &e82_phy_ops_m88,
1499         .nvm_ops                = &e82571_nvm_ops,
1500 };
1501
1502 struct e1000_info e1000_82574_info = {
1503         .mac                    = e1000_82574,
1504         .flags                  = FLAG_HAS_HW_VLAN_FILTER
1505                                   | FLAG_HAS_MSIX
1506                                   | FLAG_HAS_JUMBO_FRAMES
1507                                   | FLAG_HAS_WOL
1508                                   | FLAG_APME_IN_CTRL3
1509                                   | FLAG_RX_CSUM_ENABLED
1510                                   | FLAG_HAS_SMART_POWER_DOWN
1511                                   | FLAG_HAS_AMT
1512                                   | FLAG_HAS_CTRLEXT_ON_LOAD,
1513         .pba                    = 20,
1514         .get_variants           = e1000_get_variants_82571,
1515         .mac_ops                = &e82571_mac_ops,
1516         .phy_ops                = &e82_phy_ops_bm,
1517         .nvm_ops                = &e82571_nvm_ops,
1518 };
1519