1 /*******************************************************************************
3 Intel PRO/1000 Linux driver
4 Copyright(c) 1999 - 2006 Intel Corporation.
6 This program is free software; you can redistribute it and/or modify it
7 under the terms and conditions of the GNU General Public License,
8 version 2, as published by the Free Software Foundation.
10 This program is distributed in the hope it will be useful, but WITHOUT
11 ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
12 FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
15 You should have received a copy of the GNU General Public License along with
16 this program; if not, write to the Free Software Foundation, Inc.,
17 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
19 The full GNU General Public License is included in this distribution in
20 the file called "COPYING".
23 Linux NICS <linux.nics@intel.com>
24 e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
25 Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
27 *******************************************************************************/
30 #include <net/ip6_checksum.h>
32 char e1000_driver_name[] = "e1000";
33 static char e1000_driver_string[] = "Intel(R) PRO/1000 Network Driver";
34 #define DRV_VERSION "7.3.20-k3-NAPI"
35 const char e1000_driver_version[] = DRV_VERSION;
36 static const char e1000_copyright[] = "Copyright (c) 1999-2006 Intel Corporation.";
38 /* e1000_pci_tbl - PCI Device ID Table
40 * Last entry must be all 0s
43 * {PCI_DEVICE(PCI_VENDOR_ID_INTEL, device_id)}
45 static struct pci_device_id e1000_pci_tbl[] = {
46 INTEL_E1000_ETHERNET_DEVICE(0x1000),
47 INTEL_E1000_ETHERNET_DEVICE(0x1001),
48 INTEL_E1000_ETHERNET_DEVICE(0x1004),
49 INTEL_E1000_ETHERNET_DEVICE(0x1008),
50 INTEL_E1000_ETHERNET_DEVICE(0x1009),
51 INTEL_E1000_ETHERNET_DEVICE(0x100C),
52 INTEL_E1000_ETHERNET_DEVICE(0x100D),
53 INTEL_E1000_ETHERNET_DEVICE(0x100E),
54 INTEL_E1000_ETHERNET_DEVICE(0x100F),
55 INTEL_E1000_ETHERNET_DEVICE(0x1010),
56 INTEL_E1000_ETHERNET_DEVICE(0x1011),
57 INTEL_E1000_ETHERNET_DEVICE(0x1012),
58 INTEL_E1000_ETHERNET_DEVICE(0x1013),
59 INTEL_E1000_ETHERNET_DEVICE(0x1014),
60 INTEL_E1000_ETHERNET_DEVICE(0x1015),
61 INTEL_E1000_ETHERNET_DEVICE(0x1016),
62 INTEL_E1000_ETHERNET_DEVICE(0x1017),
63 INTEL_E1000_ETHERNET_DEVICE(0x1018),
64 INTEL_E1000_ETHERNET_DEVICE(0x1019),
65 INTEL_E1000_ETHERNET_DEVICE(0x101A),
66 INTEL_E1000_ETHERNET_DEVICE(0x101D),
67 INTEL_E1000_ETHERNET_DEVICE(0x101E),
68 INTEL_E1000_ETHERNET_DEVICE(0x1026),
69 INTEL_E1000_ETHERNET_DEVICE(0x1027),
70 INTEL_E1000_ETHERNET_DEVICE(0x1028),
71 INTEL_E1000_ETHERNET_DEVICE(0x1075),
72 INTEL_E1000_ETHERNET_DEVICE(0x1076),
73 INTEL_E1000_ETHERNET_DEVICE(0x1077),
74 INTEL_E1000_ETHERNET_DEVICE(0x1078),
75 INTEL_E1000_ETHERNET_DEVICE(0x1079),
76 INTEL_E1000_ETHERNET_DEVICE(0x107A),
77 INTEL_E1000_ETHERNET_DEVICE(0x107B),
78 INTEL_E1000_ETHERNET_DEVICE(0x107C),
79 INTEL_E1000_ETHERNET_DEVICE(0x108A),
80 INTEL_E1000_ETHERNET_DEVICE(0x1099),
81 INTEL_E1000_ETHERNET_DEVICE(0x10B5),
82 /* required last entry */
86 MODULE_DEVICE_TABLE(pci, e1000_pci_tbl);
88 int e1000_up(struct e1000_adapter *adapter);
89 void e1000_down(struct e1000_adapter *adapter);
90 void e1000_reinit_locked(struct e1000_adapter *adapter);
91 void e1000_reset(struct e1000_adapter *adapter);
92 int e1000_set_spd_dplx(struct e1000_adapter *adapter, u16 spddplx);
93 int e1000_setup_all_tx_resources(struct e1000_adapter *adapter);
94 int e1000_setup_all_rx_resources(struct e1000_adapter *adapter);
95 void e1000_free_all_tx_resources(struct e1000_adapter *adapter);
96 void e1000_free_all_rx_resources(struct e1000_adapter *adapter);
97 static int e1000_setup_tx_resources(struct e1000_adapter *adapter,
98 struct e1000_tx_ring *txdr);
99 static int e1000_setup_rx_resources(struct e1000_adapter *adapter,
100 struct e1000_rx_ring *rxdr);
101 static void e1000_free_tx_resources(struct e1000_adapter *adapter,
102 struct e1000_tx_ring *tx_ring);
103 static void e1000_free_rx_resources(struct e1000_adapter *adapter,
104 struct e1000_rx_ring *rx_ring);
105 void e1000_update_stats(struct e1000_adapter *adapter);
107 static int e1000_init_module(void);
108 static void e1000_exit_module(void);
109 static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent);
110 static void __devexit e1000_remove(struct pci_dev *pdev);
111 static int e1000_alloc_queues(struct e1000_adapter *adapter);
112 static int e1000_sw_init(struct e1000_adapter *adapter);
113 static int e1000_open(struct net_device *netdev);
114 static int e1000_close(struct net_device *netdev);
115 static void e1000_configure_tx(struct e1000_adapter *adapter);
116 static void e1000_configure_rx(struct e1000_adapter *adapter);
117 static void e1000_setup_rctl(struct e1000_adapter *adapter);
118 static void e1000_clean_all_tx_rings(struct e1000_adapter *adapter);
119 static void e1000_clean_all_rx_rings(struct e1000_adapter *adapter);
120 static void e1000_clean_tx_ring(struct e1000_adapter *adapter,
121 struct e1000_tx_ring *tx_ring);
122 static void e1000_clean_rx_ring(struct e1000_adapter *adapter,
123 struct e1000_rx_ring *rx_ring);
124 static void e1000_set_rx_mode(struct net_device *netdev);
125 static void e1000_update_phy_info(unsigned long data);
126 static void e1000_watchdog(unsigned long data);
127 static void e1000_82547_tx_fifo_stall(unsigned long data);
128 static int e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev);
129 static struct net_device_stats * e1000_get_stats(struct net_device *netdev);
130 static int e1000_change_mtu(struct net_device *netdev, int new_mtu);
131 static int e1000_set_mac(struct net_device *netdev, void *p);
132 static irqreturn_t e1000_intr(int irq, void *data);
133 static irqreturn_t e1000_intr_msi(int irq, void *data);
134 static bool e1000_clean_tx_irq(struct e1000_adapter *adapter,
135 struct e1000_tx_ring *tx_ring);
136 static int e1000_clean(struct napi_struct *napi, int budget);
137 static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
138 struct e1000_rx_ring *rx_ring,
139 int *work_done, int work_to_do);
140 static void e1000_alloc_rx_buffers(struct e1000_adapter *adapter,
141 struct e1000_rx_ring *rx_ring,
143 static int e1000_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd);
144 static int e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr,
146 static void e1000_enter_82542_rst(struct e1000_adapter *adapter);
147 static void e1000_leave_82542_rst(struct e1000_adapter *adapter);
148 static void e1000_tx_timeout(struct net_device *dev);
149 static void e1000_reset_task(struct work_struct *work);
150 static void e1000_smartspeed(struct e1000_adapter *adapter);
151 static int e1000_82547_fifo_workaround(struct e1000_adapter *adapter,
152 struct sk_buff *skb);
154 static void e1000_vlan_rx_register(struct net_device *netdev, struct vlan_group *grp);
155 static void e1000_vlan_rx_add_vid(struct net_device *netdev, u16 vid);
156 static void e1000_vlan_rx_kill_vid(struct net_device *netdev, u16 vid);
157 static void e1000_restore_vlan(struct e1000_adapter *adapter);
159 static int e1000_suspend(struct pci_dev *pdev, pm_message_t state);
161 static int e1000_resume(struct pci_dev *pdev);
163 static void e1000_shutdown(struct pci_dev *pdev);
165 #ifdef CONFIG_NET_POLL_CONTROLLER
166 /* for netdump / net console */
167 static void e1000_netpoll (struct net_device *netdev);
170 #define COPYBREAK_DEFAULT 256
171 static unsigned int copybreak __read_mostly = COPYBREAK_DEFAULT;
172 module_param(copybreak, uint, 0644);
173 MODULE_PARM_DESC(copybreak,
174 "Maximum size of packet that is copied to a new buffer on receive");
176 static pci_ers_result_t e1000_io_error_detected(struct pci_dev *pdev,
177 pci_channel_state_t state);
178 static pci_ers_result_t e1000_io_slot_reset(struct pci_dev *pdev);
179 static void e1000_io_resume(struct pci_dev *pdev);
181 static struct pci_error_handlers e1000_err_handler = {
182 .error_detected = e1000_io_error_detected,
183 .slot_reset = e1000_io_slot_reset,
184 .resume = e1000_io_resume,
187 static struct pci_driver e1000_driver = {
188 .name = e1000_driver_name,
189 .id_table = e1000_pci_tbl,
190 .probe = e1000_probe,
191 .remove = __devexit_p(e1000_remove),
193 /* Power Managment Hooks */
194 .suspend = e1000_suspend,
195 .resume = e1000_resume,
197 .shutdown = e1000_shutdown,
198 .err_handler = &e1000_err_handler
201 MODULE_AUTHOR("Intel Corporation, <linux.nics@intel.com>");
202 MODULE_DESCRIPTION("Intel(R) PRO/1000 Network Driver");
203 MODULE_LICENSE("GPL");
204 MODULE_VERSION(DRV_VERSION);
206 static int debug = NETIF_MSG_DRV | NETIF_MSG_PROBE;
207 module_param(debug, int, 0);
208 MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)");
211 * e1000_init_module - Driver Registration Routine
213 * e1000_init_module is the first routine called when the driver is
214 * loaded. All it does is register with the PCI subsystem.
217 static int __init e1000_init_module(void)
220 printk(KERN_INFO "%s - version %s\n",
221 e1000_driver_string, e1000_driver_version);
223 printk(KERN_INFO "%s\n", e1000_copyright);
225 ret = pci_register_driver(&e1000_driver);
226 if (copybreak != COPYBREAK_DEFAULT) {
228 printk(KERN_INFO "e1000: copybreak disabled\n");
230 printk(KERN_INFO "e1000: copybreak enabled for "
231 "packets <= %u bytes\n", copybreak);
236 module_init(e1000_init_module);
239 * e1000_exit_module - Driver Exit Cleanup Routine
241 * e1000_exit_module is called just before the driver is removed
245 static void __exit e1000_exit_module(void)
247 pci_unregister_driver(&e1000_driver);
250 module_exit(e1000_exit_module);
252 static int e1000_request_irq(struct e1000_adapter *adapter)
254 struct e1000_hw *hw = &adapter->hw;
255 struct net_device *netdev = adapter->netdev;
256 irq_handler_t handler = e1000_intr;
257 int irq_flags = IRQF_SHARED;
260 if (hw->mac_type >= e1000_82571) {
261 adapter->have_msi = !pci_enable_msi(adapter->pdev);
262 if (adapter->have_msi) {
263 handler = e1000_intr_msi;
268 err = request_irq(adapter->pdev->irq, handler, irq_flags, netdev->name,
271 if (adapter->have_msi)
272 pci_disable_msi(adapter->pdev);
274 "Unable to allocate interrupt Error: %d\n", err);
280 static void e1000_free_irq(struct e1000_adapter *adapter)
282 struct net_device *netdev = adapter->netdev;
284 free_irq(adapter->pdev->irq, netdev);
286 if (adapter->have_msi)
287 pci_disable_msi(adapter->pdev);
291 * e1000_irq_disable - Mask off interrupt generation on the NIC
292 * @adapter: board private structure
295 static void e1000_irq_disable(struct e1000_adapter *adapter)
297 struct e1000_hw *hw = &adapter->hw;
301 synchronize_irq(adapter->pdev->irq);
305 * e1000_irq_enable - Enable default interrupt generation settings
306 * @adapter: board private structure
309 static void e1000_irq_enable(struct e1000_adapter *adapter)
311 struct e1000_hw *hw = &adapter->hw;
313 ew32(IMS, IMS_ENABLE_MASK);
317 static void e1000_update_mng_vlan(struct e1000_adapter *adapter)
319 struct e1000_hw *hw = &adapter->hw;
320 struct net_device *netdev = adapter->netdev;
321 u16 vid = hw->mng_cookie.vlan_id;
322 u16 old_vid = adapter->mng_vlan_id;
323 if (adapter->vlgrp) {
324 if (!vlan_group_get_device(adapter->vlgrp, vid)) {
325 if (hw->mng_cookie.status &
326 E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) {
327 e1000_vlan_rx_add_vid(netdev, vid);
328 adapter->mng_vlan_id = vid;
330 adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
332 if ((old_vid != (u16)E1000_MNG_VLAN_NONE) &&
334 !vlan_group_get_device(adapter->vlgrp, old_vid))
335 e1000_vlan_rx_kill_vid(netdev, old_vid);
337 adapter->mng_vlan_id = vid;
342 * e1000_release_hw_control - release control of the h/w to f/w
343 * @adapter: address of board private structure
345 * e1000_release_hw_control resets {CTRL_EXT|FWSM}:DRV_LOAD bit.
346 * For ASF and Pass Through versions of f/w this means that the
347 * driver is no longer loaded. For AMT version (only with 82573) i
348 * of the f/w this means that the network i/f is closed.
352 static void e1000_release_hw_control(struct e1000_adapter *adapter)
356 struct e1000_hw *hw = &adapter->hw;
358 /* Let firmware taken over control of h/w */
359 switch (hw->mac_type) {
362 ew32(SWSM, swsm & ~E1000_SWSM_DRV_LOAD);
366 case e1000_80003es2lan:
368 ctrl_ext = er32(CTRL_EXT);
369 ew32(CTRL_EXT, ctrl_ext & ~E1000_CTRL_EXT_DRV_LOAD);
377 * e1000_get_hw_control - get control of the h/w from f/w
378 * @adapter: address of board private structure
380 * e1000_get_hw_control sets {CTRL_EXT|FWSM}:DRV_LOAD bit.
381 * For ASF and Pass Through versions of f/w this means that
382 * the driver is loaded. For AMT version (only with 82573)
383 * of the f/w this means that the network i/f is open.
387 static void e1000_get_hw_control(struct e1000_adapter *adapter)
391 struct e1000_hw *hw = &adapter->hw;
393 /* Let firmware know the driver has taken over */
394 switch (hw->mac_type) {
397 ew32(SWSM, swsm | E1000_SWSM_DRV_LOAD);
401 case e1000_80003es2lan:
403 ctrl_ext = er32(CTRL_EXT);
404 ew32(CTRL_EXT, ctrl_ext | E1000_CTRL_EXT_DRV_LOAD);
411 static void e1000_init_manageability(struct e1000_adapter *adapter)
413 struct e1000_hw *hw = &adapter->hw;
415 if (adapter->en_mng_pt) {
416 u32 manc = er32(MANC);
418 /* disable hardware interception of ARP */
419 manc &= ~(E1000_MANC_ARP_EN);
421 /* enable receiving management packets to the host */
422 /* this will probably generate destination unreachable messages
423 * from the host OS, but the packets will be handled on SMBUS */
424 if (hw->has_manc2h) {
425 u32 manc2h = er32(MANC2H);
427 manc |= E1000_MANC_EN_MNG2HOST;
428 #define E1000_MNG2HOST_PORT_623 (1 << 5)
429 #define E1000_MNG2HOST_PORT_664 (1 << 6)
430 manc2h |= E1000_MNG2HOST_PORT_623;
431 manc2h |= E1000_MNG2HOST_PORT_664;
432 ew32(MANC2H, manc2h);
439 static void e1000_release_manageability(struct e1000_adapter *adapter)
441 struct e1000_hw *hw = &adapter->hw;
443 if (adapter->en_mng_pt) {
444 u32 manc = er32(MANC);
446 /* re-enable hardware interception of ARP */
447 manc |= E1000_MANC_ARP_EN;
450 manc &= ~E1000_MANC_EN_MNG2HOST;
452 /* don't explicitly have to mess with MANC2H since
453 * MANC has an enable disable that gates MANC2H */
460 * e1000_configure - configure the hardware for RX and TX
461 * @adapter = private board structure
463 static void e1000_configure(struct e1000_adapter *adapter)
465 struct net_device *netdev = adapter->netdev;
468 e1000_set_rx_mode(netdev);
470 e1000_restore_vlan(adapter);
471 e1000_init_manageability(adapter);
473 e1000_configure_tx(adapter);
474 e1000_setup_rctl(adapter);
475 e1000_configure_rx(adapter);
476 /* call E1000_DESC_UNUSED which always leaves
477 * at least 1 descriptor unused to make sure
478 * next_to_use != next_to_clean */
479 for (i = 0; i < adapter->num_rx_queues; i++) {
480 struct e1000_rx_ring *ring = &adapter->rx_ring[i];
481 adapter->alloc_rx_buf(adapter, ring,
482 E1000_DESC_UNUSED(ring));
485 adapter->tx_queue_len = netdev->tx_queue_len;
488 int e1000_up(struct e1000_adapter *adapter)
490 struct e1000_hw *hw = &adapter->hw;
492 /* hardware has been reset, we need to reload some things */
493 e1000_configure(adapter);
495 clear_bit(__E1000_DOWN, &adapter->flags);
497 napi_enable(&adapter->napi);
499 e1000_irq_enable(adapter);
501 /* fire a link change interrupt to start the watchdog */
502 ew32(ICS, E1000_ICS_LSC);
507 * e1000_power_up_phy - restore link in case the phy was powered down
508 * @adapter: address of board private structure
510 * The phy may be powered down to save power and turn off link when the
511 * driver is unloaded and wake on lan is not enabled (among others)
512 * *** this routine MUST be followed by a call to e1000_reset ***
516 void e1000_power_up_phy(struct e1000_adapter *adapter)
518 struct e1000_hw *hw = &adapter->hw;
521 /* Just clear the power down bit to wake the phy back up */
522 if (hw->media_type == e1000_media_type_copper) {
523 /* according to the manual, the phy will retain its
524 * settings across a power-down/up cycle */
525 e1000_read_phy_reg(hw, PHY_CTRL, &mii_reg);
526 mii_reg &= ~MII_CR_POWER_DOWN;
527 e1000_write_phy_reg(hw, PHY_CTRL, mii_reg);
531 static void e1000_power_down_phy(struct e1000_adapter *adapter)
533 struct e1000_hw *hw = &adapter->hw;
535 /* Power down the PHY so no link is implied when interface is down *
536 * The PHY cannot be powered down if any of the following is true *
539 * (c) SoL/IDER session is active */
540 if (!adapter->wol && hw->mac_type >= e1000_82540 &&
541 hw->media_type == e1000_media_type_copper) {
544 switch (hw->mac_type) {
547 case e1000_82545_rev_3:
549 case e1000_82546_rev_3:
551 case e1000_82541_rev_2:
553 case e1000_82547_rev_2:
554 if (er32(MANC) & E1000_MANC_SMBUS_EN)
560 case e1000_80003es2lan:
562 if (e1000_check_mng_mode(hw) ||
563 e1000_check_phy_reset_block(hw))
569 e1000_read_phy_reg(hw, PHY_CTRL, &mii_reg);
570 mii_reg |= MII_CR_POWER_DOWN;
571 e1000_write_phy_reg(hw, PHY_CTRL, mii_reg);
578 void e1000_down(struct e1000_adapter *adapter)
580 struct net_device *netdev = adapter->netdev;
582 /* signal that we're down so the interrupt handler does not
583 * reschedule our watchdog timer */
584 set_bit(__E1000_DOWN, &adapter->flags);
586 napi_disable(&adapter->napi);
588 e1000_irq_disable(adapter);
590 del_timer_sync(&adapter->tx_fifo_stall_timer);
591 del_timer_sync(&adapter->watchdog_timer);
592 del_timer_sync(&adapter->phy_info_timer);
594 netdev->tx_queue_len = adapter->tx_queue_len;
595 adapter->link_speed = 0;
596 adapter->link_duplex = 0;
597 netif_carrier_off(netdev);
598 netif_stop_queue(netdev);
600 e1000_reset(adapter);
601 e1000_clean_all_tx_rings(adapter);
602 e1000_clean_all_rx_rings(adapter);
605 void e1000_reinit_locked(struct e1000_adapter *adapter)
607 WARN_ON(in_interrupt());
608 while (test_and_set_bit(__E1000_RESETTING, &adapter->flags))
612 clear_bit(__E1000_RESETTING, &adapter->flags);
615 void e1000_reset(struct e1000_adapter *adapter)
617 struct e1000_hw *hw = &adapter->hw;
618 u32 pba = 0, tx_space, min_tx_space, min_rx_space;
619 u16 fc_high_water_mark = E1000_FC_HIGH_DIFF;
620 bool legacy_pba_adjust = false;
622 /* Repartition Pba for greater than 9k mtu
623 * To take effect CTRL.RST is required.
626 switch (hw->mac_type) {
627 case e1000_82542_rev2_0:
628 case e1000_82542_rev2_1:
633 case e1000_82541_rev_2:
634 legacy_pba_adjust = true;
638 case e1000_82545_rev_3:
640 case e1000_82546_rev_3:
644 case e1000_82547_rev_2:
645 legacy_pba_adjust = true;
650 case e1000_80003es2lan:
658 case e1000_undefined:
663 if (legacy_pba_adjust) {
664 if (adapter->netdev->mtu > E1000_RXBUFFER_8192)
665 pba -= 8; /* allocate more FIFO for Tx */
667 if (hw->mac_type == e1000_82547) {
668 adapter->tx_fifo_head = 0;
669 adapter->tx_head_addr = pba << E1000_TX_HEAD_ADDR_SHIFT;
670 adapter->tx_fifo_size =
671 (E1000_PBA_40K - pba) << E1000_PBA_BYTES_SHIFT;
672 atomic_set(&adapter->tx_fifo_stall, 0);
674 } else if (hw->max_frame_size > MAXIMUM_ETHERNET_FRAME_SIZE) {
675 /* adjust PBA for jumbo frames */
678 /* To maintain wire speed transmits, the Tx FIFO should be
679 * large enough to accomodate two full transmit packets,
680 * rounded up to the next 1KB and expressed in KB. Likewise,
681 * the Rx FIFO should be large enough to accomodate at least
682 * one full receive packet and is similarly rounded up and
683 * expressed in KB. */
685 /* upper 16 bits has Tx packet buffer allocation size in KB */
686 tx_space = pba >> 16;
687 /* lower 16 bits has Rx packet buffer allocation size in KB */
689 /* don't include ethernet FCS because hardware appends/strips */
690 min_rx_space = adapter->netdev->mtu + ENET_HEADER_SIZE +
692 min_tx_space = min_rx_space;
694 min_tx_space = ALIGN(min_tx_space, 1024);
696 min_rx_space = ALIGN(min_rx_space, 1024);
699 /* If current Tx allocation is less than the min Tx FIFO size,
700 * and the min Tx FIFO size is less than the current Rx FIFO
701 * allocation, take space away from current Rx allocation */
702 if (tx_space < min_tx_space &&
703 ((min_tx_space - tx_space) < pba)) {
704 pba = pba - (min_tx_space - tx_space);
706 /* PCI/PCIx hardware has PBA alignment constraints */
707 switch (hw->mac_type) {
708 case e1000_82545 ... e1000_82546_rev_3:
709 pba &= ~(E1000_PBA_8K - 1);
715 /* if short on rx space, rx wins and must trump tx
716 * adjustment or use Early Receive if available */
717 if (pba < min_rx_space) {
718 switch (hw->mac_type) {
720 /* ERT enabled in e1000_configure_rx */
732 /* flow control settings */
733 /* Set the FC high water mark to 90% of the FIFO size.
734 * Required to clear last 3 LSB */
735 fc_high_water_mark = ((pba * 9216)/10) & 0xFFF8;
736 /* We can't use 90% on small FIFOs because the remainder
737 * would be less than 1 full frame. In this case, we size
738 * it to allow at least a full frame above the high water
740 if (pba < E1000_PBA_16K)
741 fc_high_water_mark = (pba * 1024) - 1600;
743 hw->fc_high_water = fc_high_water_mark;
744 hw->fc_low_water = fc_high_water_mark - 8;
745 if (hw->mac_type == e1000_80003es2lan)
746 hw->fc_pause_time = 0xFFFF;
748 hw->fc_pause_time = E1000_FC_PAUSE_TIME;
750 hw->fc = hw->original_fc;
752 /* Allow time for pending master requests to run */
754 if (hw->mac_type >= e1000_82544)
757 if (e1000_init_hw(hw))
758 DPRINTK(PROBE, ERR, "Hardware Error\n");
759 e1000_update_mng_vlan(adapter);
761 /* if (adapter->hwflags & HWFLAGS_PHY_PWR_BIT) { */
762 if (hw->mac_type >= e1000_82544 &&
763 hw->mac_type <= e1000_82547_rev_2 &&
765 hw->autoneg_advertised == ADVERTISE_1000_FULL) {
766 u32 ctrl = er32(CTRL);
767 /* clear phy power management bit if we are in gig only mode,
768 * which if enabled will attempt negotiation to 100Mb, which
769 * can cause a loss of link at power off or driver unload */
770 ctrl &= ~E1000_CTRL_SWDPIN3;
774 /* Enable h/w to recognize an 802.1Q VLAN Ethernet packet */
775 ew32(VET, ETHERNET_IEEE_VLAN_TYPE);
777 e1000_reset_adaptive(hw);
778 e1000_phy_get_info(hw, &adapter->phy_info);
780 if (!adapter->smart_power_down &&
781 (hw->mac_type == e1000_82571 ||
782 hw->mac_type == e1000_82572)) {
784 /* speed up time to link by disabling smart power down, ignore
785 * the return value of this function because there is nothing
786 * different we would do if it failed */
787 e1000_read_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT,
789 phy_data &= ~IGP02E1000_PM_SPD;
790 e1000_write_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT,
794 e1000_release_manageability(adapter);
798 * Dump the eeprom for users having checksum issues
800 static void e1000_dump_eeprom(struct e1000_adapter *adapter)
802 struct net_device *netdev = adapter->netdev;
803 struct ethtool_eeprom eeprom;
804 const struct ethtool_ops *ops = netdev->ethtool_ops;
807 u16 csum_old, csum_new = 0;
809 eeprom.len = ops->get_eeprom_len(netdev);
812 data = kmalloc(eeprom.len, GFP_KERNEL);
814 printk(KERN_ERR "Unable to allocate memory to dump EEPROM"
819 ops->get_eeprom(netdev, &eeprom, data);
821 csum_old = (data[EEPROM_CHECKSUM_REG * 2]) +
822 (data[EEPROM_CHECKSUM_REG * 2 + 1] << 8);
823 for (i = 0; i < EEPROM_CHECKSUM_REG * 2; i += 2)
824 csum_new += data[i] + (data[i + 1] << 8);
825 csum_new = EEPROM_SUM - csum_new;
827 printk(KERN_ERR "/*********************/\n");
828 printk(KERN_ERR "Current EEPROM Checksum : 0x%04x\n", csum_old);
829 printk(KERN_ERR "Calculated : 0x%04x\n", csum_new);
831 printk(KERN_ERR "Offset Values\n");
832 printk(KERN_ERR "======== ======\n");
833 print_hex_dump(KERN_ERR, "", DUMP_PREFIX_OFFSET, 16, 1, data, 128, 0);
835 printk(KERN_ERR "Include this output when contacting your support "
837 printk(KERN_ERR "This is not a software error! Something bad "
838 "happened to your hardware or\n");
839 printk(KERN_ERR "EEPROM image. Ignoring this "
840 "problem could result in further problems,\n");
841 printk(KERN_ERR "possibly loss of data, corruption or system hangs!\n");
842 printk(KERN_ERR "The MAC Address will be reset to 00:00:00:00:00:00, "
843 "which is invalid\n");
844 printk(KERN_ERR "and requires you to set the proper MAC "
845 "address manually before continuing\n");
846 printk(KERN_ERR "to enable this network device.\n");
847 printk(KERN_ERR "Please inspect the EEPROM dump and report the issue "
848 "to your hardware vendor\n");
849 printk(KERN_ERR "or Intel Customer Support.\n");
850 printk(KERN_ERR "/*********************/\n");
856 * e1000_is_need_ioport - determine if an adapter needs ioport resources or not
857 * @pdev: PCI device information struct
859 * Return true if an adapter needs ioport resources
861 static int e1000_is_need_ioport(struct pci_dev *pdev)
863 switch (pdev->device) {
864 case E1000_DEV_ID_82540EM:
865 case E1000_DEV_ID_82540EM_LOM:
866 case E1000_DEV_ID_82540EP:
867 case E1000_DEV_ID_82540EP_LOM:
868 case E1000_DEV_ID_82540EP_LP:
869 case E1000_DEV_ID_82541EI:
870 case E1000_DEV_ID_82541EI_MOBILE:
871 case E1000_DEV_ID_82541ER:
872 case E1000_DEV_ID_82541ER_LOM:
873 case E1000_DEV_ID_82541GI:
874 case E1000_DEV_ID_82541GI_LF:
875 case E1000_DEV_ID_82541GI_MOBILE:
876 case E1000_DEV_ID_82544EI_COPPER:
877 case E1000_DEV_ID_82544EI_FIBER:
878 case E1000_DEV_ID_82544GC_COPPER:
879 case E1000_DEV_ID_82544GC_LOM:
880 case E1000_DEV_ID_82545EM_COPPER:
881 case E1000_DEV_ID_82545EM_FIBER:
882 case E1000_DEV_ID_82546EB_COPPER:
883 case E1000_DEV_ID_82546EB_FIBER:
884 case E1000_DEV_ID_82546EB_QUAD_COPPER:
892 * e1000_probe - Device Initialization Routine
893 * @pdev: PCI device information struct
894 * @ent: entry in e1000_pci_tbl
896 * Returns 0 on success, negative on failure
898 * e1000_probe initializes an adapter identified by a pci_dev structure.
899 * The OS initialization, configuring of the adapter private structure,
900 * and a hardware reset occur.
902 static int __devinit e1000_probe(struct pci_dev *pdev,
903 const struct pci_device_id *ent)
905 struct net_device *netdev;
906 struct e1000_adapter *adapter;
909 static int cards_found = 0;
910 static int global_quad_port_a = 0; /* global ksp3 port a indication */
911 int i, err, pci_using_dac;
913 u16 eeprom_apme_mask = E1000_EEPROM_APME;
914 int bars, need_ioport;
916 /* do not allocate ioport bars when not needed */
917 need_ioport = e1000_is_need_ioport(pdev);
919 bars = pci_select_bars(pdev, IORESOURCE_MEM | IORESOURCE_IO);
920 err = pci_enable_device(pdev);
922 bars = pci_select_bars(pdev, IORESOURCE_MEM);
923 err = pci_enable_device(pdev);
928 if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK) &&
929 !pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK)) {
932 err = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
934 err = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
936 E1000_ERR("No usable DMA configuration, "
944 err = pci_request_selected_regions(pdev, bars, e1000_driver_name);
948 pci_set_master(pdev);
951 netdev = alloc_etherdev(sizeof(struct e1000_adapter));
953 goto err_alloc_etherdev;
955 SET_NETDEV_DEV(netdev, &pdev->dev);
957 pci_set_drvdata(pdev, netdev);
958 adapter = netdev_priv(netdev);
959 adapter->netdev = netdev;
960 adapter->pdev = pdev;
961 adapter->msg_enable = (1 << debug) - 1;
962 adapter->bars = bars;
963 adapter->need_ioport = need_ioport;
969 hw->hw_addr = ioremap(pci_resource_start(pdev, BAR_0),
970 pci_resource_len(pdev, BAR_0));
974 if (adapter->need_ioport) {
975 for (i = BAR_1; i <= BAR_5; i++) {
976 if (pci_resource_len(pdev, i) == 0)
978 if (pci_resource_flags(pdev, i) & IORESOURCE_IO) {
979 hw->io_base = pci_resource_start(pdev, i);
985 netdev->open = &e1000_open;
986 netdev->stop = &e1000_close;
987 netdev->hard_start_xmit = &e1000_xmit_frame;
988 netdev->get_stats = &e1000_get_stats;
989 netdev->set_rx_mode = &e1000_set_rx_mode;
990 netdev->set_mac_address = &e1000_set_mac;
991 netdev->change_mtu = &e1000_change_mtu;
992 netdev->do_ioctl = &e1000_ioctl;
993 e1000_set_ethtool_ops(netdev);
994 netdev->tx_timeout = &e1000_tx_timeout;
995 netdev->watchdog_timeo = 5 * HZ;
996 netif_napi_add(netdev, &adapter->napi, e1000_clean, 64);
997 netdev->vlan_rx_register = e1000_vlan_rx_register;
998 netdev->vlan_rx_add_vid = e1000_vlan_rx_add_vid;
999 netdev->vlan_rx_kill_vid = e1000_vlan_rx_kill_vid;
1000 #ifdef CONFIG_NET_POLL_CONTROLLER
1001 netdev->poll_controller = e1000_netpoll;
1003 strncpy(netdev->name, pci_name(pdev), sizeof(netdev->name) - 1);
1005 adapter->bd_number = cards_found;
1007 /* setup the private structure */
1009 err = e1000_sw_init(adapter);
1014 /* Flash BAR mapping must happen after e1000_sw_init
1015 * because it depends on mac_type */
1016 if ((hw->mac_type == e1000_ich8lan) &&
1017 (pci_resource_flags(pdev, 1) & IORESOURCE_MEM)) {
1019 ioremap(pci_resource_start(pdev, 1),
1020 pci_resource_len(pdev, 1));
1021 if (!hw->flash_address)
1025 if (e1000_check_phy_reset_block(hw))
1026 DPRINTK(PROBE, INFO, "PHY reset is blocked due to SOL/IDER session.\n");
1028 if (hw->mac_type >= e1000_82543) {
1029 netdev->features = NETIF_F_SG |
1031 NETIF_F_HW_VLAN_TX |
1032 NETIF_F_HW_VLAN_RX |
1033 NETIF_F_HW_VLAN_FILTER;
1034 if (hw->mac_type == e1000_ich8lan)
1035 netdev->features &= ~NETIF_F_HW_VLAN_FILTER;
1038 if ((hw->mac_type >= e1000_82544) &&
1039 (hw->mac_type != e1000_82547))
1040 netdev->features |= NETIF_F_TSO;
1042 if (hw->mac_type > e1000_82547_rev_2)
1043 netdev->features |= NETIF_F_TSO6;
1045 netdev->features |= NETIF_F_HIGHDMA;
1047 netdev->features |= NETIF_F_LLTX;
1049 netdev->vlan_features |= NETIF_F_TSO;
1050 netdev->vlan_features |= NETIF_F_TSO6;
1051 netdev->vlan_features |= NETIF_F_HW_CSUM;
1052 netdev->vlan_features |= NETIF_F_SG;
1054 adapter->en_mng_pt = e1000_enable_mng_pass_thru(hw);
1056 /* initialize eeprom parameters */
1057 if (e1000_init_eeprom_params(hw)) {
1058 E1000_ERR("EEPROM initialization failed\n");
1062 /* before reading the EEPROM, reset the controller to
1063 * put the device in a known good starting state */
1067 /* make sure the EEPROM is good */
1068 if (e1000_validate_eeprom_checksum(hw) < 0) {
1069 DPRINTK(PROBE, ERR, "The EEPROM Checksum Is Not Valid\n");
1070 e1000_dump_eeprom(adapter);
1072 * set MAC address to all zeroes to invalidate and temporary
1073 * disable this device for the user. This blocks regular
1074 * traffic while still permitting ethtool ioctls from reaching
1075 * the hardware as well as allowing the user to run the
1076 * interface after manually setting a hw addr using
1079 memset(hw->mac_addr, 0, netdev->addr_len);
1081 /* copy the MAC address out of the EEPROM */
1082 if (e1000_read_mac_addr(hw))
1083 DPRINTK(PROBE, ERR, "EEPROM Read Error\n");
1085 /* don't block initalization here due to bad MAC address */
1086 memcpy(netdev->dev_addr, hw->mac_addr, netdev->addr_len);
1087 memcpy(netdev->perm_addr, hw->mac_addr, netdev->addr_len);
1089 if (!is_valid_ether_addr(netdev->perm_addr))
1090 DPRINTK(PROBE, ERR, "Invalid MAC Address\n");
1092 e1000_get_bus_info(hw);
1094 init_timer(&adapter->tx_fifo_stall_timer);
1095 adapter->tx_fifo_stall_timer.function = &e1000_82547_tx_fifo_stall;
1096 adapter->tx_fifo_stall_timer.data = (unsigned long)adapter;
1098 init_timer(&adapter->watchdog_timer);
1099 adapter->watchdog_timer.function = &e1000_watchdog;
1100 adapter->watchdog_timer.data = (unsigned long) adapter;
1102 init_timer(&adapter->phy_info_timer);
1103 adapter->phy_info_timer.function = &e1000_update_phy_info;
1104 adapter->phy_info_timer.data = (unsigned long)adapter;
1106 INIT_WORK(&adapter->reset_task, e1000_reset_task);
1108 e1000_check_options(adapter);
1110 /* Initial Wake on LAN setting
1111 * If APM wake is enabled in the EEPROM,
1112 * enable the ACPI Magic Packet filter
1115 switch (hw->mac_type) {
1116 case e1000_82542_rev2_0:
1117 case e1000_82542_rev2_1:
1121 e1000_read_eeprom(hw,
1122 EEPROM_INIT_CONTROL2_REG, 1, &eeprom_data);
1123 eeprom_apme_mask = E1000_EEPROM_82544_APM;
1126 e1000_read_eeprom(hw,
1127 EEPROM_INIT_CONTROL1_REG, 1, &eeprom_data);
1128 eeprom_apme_mask = E1000_EEPROM_ICH8_APME;
1131 case e1000_82546_rev_3:
1133 case e1000_80003es2lan:
1134 if (er32(STATUS) & E1000_STATUS_FUNC_1){
1135 e1000_read_eeprom(hw,
1136 EEPROM_INIT_CONTROL3_PORT_B, 1, &eeprom_data);
1141 e1000_read_eeprom(hw,
1142 EEPROM_INIT_CONTROL3_PORT_A, 1, &eeprom_data);
1145 if (eeprom_data & eeprom_apme_mask)
1146 adapter->eeprom_wol |= E1000_WUFC_MAG;
1148 /* now that we have the eeprom settings, apply the special cases
1149 * where the eeprom may be wrong or the board simply won't support
1150 * wake on lan on a particular port */
1151 switch (pdev->device) {
1152 case E1000_DEV_ID_82546GB_PCIE:
1153 adapter->eeprom_wol = 0;
1155 case E1000_DEV_ID_82546EB_FIBER:
1156 case E1000_DEV_ID_82546GB_FIBER:
1157 case E1000_DEV_ID_82571EB_FIBER:
1158 /* Wake events only supported on port A for dual fiber
1159 * regardless of eeprom setting */
1160 if (er32(STATUS) & E1000_STATUS_FUNC_1)
1161 adapter->eeprom_wol = 0;
1163 case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3:
1164 case E1000_DEV_ID_82571EB_QUAD_COPPER:
1165 case E1000_DEV_ID_82571EB_QUAD_FIBER:
1166 case E1000_DEV_ID_82571EB_QUAD_COPPER_LOWPROFILE:
1167 case E1000_DEV_ID_82571PT_QUAD_COPPER:
1168 /* if quad port adapter, disable WoL on all but port A */
1169 if (global_quad_port_a != 0)
1170 adapter->eeprom_wol = 0;
1172 adapter->quad_port_a = 1;
1173 /* Reset for multiple quad port adapters */
1174 if (++global_quad_port_a == 4)
1175 global_quad_port_a = 0;
1179 /* initialize the wol settings based on the eeprom settings */
1180 adapter->wol = adapter->eeprom_wol;
1182 /* print bus type/speed/width info */
1183 DPRINTK(PROBE, INFO, "(PCI%s:%s:%s) ",
1184 ((hw->bus_type == e1000_bus_type_pcix) ? "-X" :
1185 (hw->bus_type == e1000_bus_type_pci_express ? " Express":"")),
1186 ((hw->bus_speed == e1000_bus_speed_2500) ? "2.5Gb/s" :
1187 (hw->bus_speed == e1000_bus_speed_133) ? "133MHz" :
1188 (hw->bus_speed == e1000_bus_speed_120) ? "120MHz" :
1189 (hw->bus_speed == e1000_bus_speed_100) ? "100MHz" :
1190 (hw->bus_speed == e1000_bus_speed_66) ? "66MHz" : "33MHz"),
1191 ((hw->bus_width == e1000_bus_width_64) ? "64-bit" :
1192 (hw->bus_width == e1000_bus_width_pciex_4) ? "Width x4" :
1193 (hw->bus_width == e1000_bus_width_pciex_1) ? "Width x1" :
1196 printk("%pM\n", netdev->dev_addr);
1198 if (hw->bus_type == e1000_bus_type_pci_express) {
1199 DPRINTK(PROBE, WARNING, "This device (id %04x:%04x) will no "
1200 "longer be supported by this driver in the future.\n",
1201 pdev->vendor, pdev->device);
1202 DPRINTK(PROBE, WARNING, "please use the \"e1000e\" "
1203 "driver instead.\n");
1206 /* reset the hardware with the new settings */
1207 e1000_reset(adapter);
1209 /* If the controller is 82573 and f/w is AMT, do not set
1210 * DRV_LOAD until the interface is up. For all other cases,
1211 * let the f/w know that the h/w is now under the control
1213 if (hw->mac_type != e1000_82573 ||
1214 !e1000_check_mng_mode(hw))
1215 e1000_get_hw_control(adapter);
1217 /* tell the stack to leave us alone until e1000_open() is called */
1218 netif_carrier_off(netdev);
1219 netif_stop_queue(netdev);
1221 strcpy(netdev->name, "eth%d");
1222 err = register_netdev(netdev);
1226 DPRINTK(PROBE, INFO, "Intel(R) PRO/1000 Network Connection\n");
1232 e1000_release_hw_control(adapter);
1234 if (!e1000_check_phy_reset_block(hw))
1235 e1000_phy_hw_reset(hw);
1237 if (hw->flash_address)
1238 iounmap(hw->flash_address);
1240 for (i = 0; i < adapter->num_rx_queues; i++)
1241 dev_put(&adapter->polling_netdev[i]);
1243 kfree(adapter->tx_ring);
1244 kfree(adapter->rx_ring);
1245 kfree(adapter->polling_netdev);
1247 iounmap(hw->hw_addr);
1249 free_netdev(netdev);
1251 pci_release_selected_regions(pdev, bars);
1254 pci_disable_device(pdev);
1259 * e1000_remove - Device Removal Routine
1260 * @pdev: PCI device information struct
1262 * e1000_remove is called by the PCI subsystem to alert the driver
1263 * that it should release a PCI device. The could be caused by a
1264 * Hot-Plug event, or because the driver is going to be removed from
1268 static void __devexit e1000_remove(struct pci_dev *pdev)
1270 struct net_device *netdev = pci_get_drvdata(pdev);
1271 struct e1000_adapter *adapter = netdev_priv(netdev);
1272 struct e1000_hw *hw = &adapter->hw;
1275 cancel_work_sync(&adapter->reset_task);
1277 e1000_release_manageability(adapter);
1279 /* Release control of h/w to f/w. If f/w is AMT enabled, this
1280 * would have already happened in close and is redundant. */
1281 e1000_release_hw_control(adapter);
1283 for (i = 0; i < adapter->num_rx_queues; i++)
1284 dev_put(&adapter->polling_netdev[i]);
1286 unregister_netdev(netdev);
1288 if (!e1000_check_phy_reset_block(hw))
1289 e1000_phy_hw_reset(hw);
1291 kfree(adapter->tx_ring);
1292 kfree(adapter->rx_ring);
1293 kfree(adapter->polling_netdev);
1295 iounmap(hw->hw_addr);
1296 if (hw->flash_address)
1297 iounmap(hw->flash_address);
1298 pci_release_selected_regions(pdev, adapter->bars);
1300 free_netdev(netdev);
1302 pci_disable_device(pdev);
1306 * e1000_sw_init - Initialize general software structures (struct e1000_adapter)
1307 * @adapter: board private structure to initialize
1309 * e1000_sw_init initializes the Adapter private data structure.
1310 * Fields are initialized based on PCI device information and
1311 * OS network device settings (MTU size).
1314 static int __devinit e1000_sw_init(struct e1000_adapter *adapter)
1316 struct e1000_hw *hw = &adapter->hw;
1317 struct net_device *netdev = adapter->netdev;
1318 struct pci_dev *pdev = adapter->pdev;
1321 /* PCI config space info */
1323 hw->vendor_id = pdev->vendor;
1324 hw->device_id = pdev->device;
1325 hw->subsystem_vendor_id = pdev->subsystem_vendor;
1326 hw->subsystem_id = pdev->subsystem_device;
1327 hw->revision_id = pdev->revision;
1329 pci_read_config_word(pdev, PCI_COMMAND, &hw->pci_cmd_word);
1331 adapter->rx_buffer_len = MAXIMUM_ETHERNET_VLAN_SIZE;
1332 hw->max_frame_size = netdev->mtu +
1333 ENET_HEADER_SIZE + ETHERNET_FCS_SIZE;
1334 hw->min_frame_size = MINIMUM_ETHERNET_FRAME_SIZE;
1336 /* identify the MAC */
1338 if (e1000_set_mac_type(hw)) {
1339 DPRINTK(PROBE, ERR, "Unknown MAC Type\n");
1343 switch (hw->mac_type) {
1348 case e1000_82541_rev_2:
1349 case e1000_82547_rev_2:
1350 hw->phy_init_script = 1;
1354 e1000_set_media_type(hw);
1356 hw->wait_autoneg_complete = false;
1357 hw->tbi_compatibility_en = true;
1358 hw->adaptive_ifs = true;
1360 /* Copper options */
1362 if (hw->media_type == e1000_media_type_copper) {
1363 hw->mdix = AUTO_ALL_MODES;
1364 hw->disable_polarity_correction = false;
1365 hw->master_slave = E1000_MASTER_SLAVE;
1368 adapter->num_tx_queues = 1;
1369 adapter->num_rx_queues = 1;
1371 if (e1000_alloc_queues(adapter)) {
1372 DPRINTK(PROBE, ERR, "Unable to allocate memory for queues\n");
1376 for (i = 0; i < adapter->num_rx_queues; i++) {
1377 adapter->polling_netdev[i].priv = adapter;
1378 dev_hold(&adapter->polling_netdev[i]);
1379 set_bit(__LINK_STATE_START, &adapter->polling_netdev[i].state);
1381 spin_lock_init(&adapter->tx_queue_lock);
1383 /* Explicitly disable IRQ since the NIC can be in any state. */
1384 e1000_irq_disable(adapter);
1386 spin_lock_init(&adapter->stats_lock);
1388 set_bit(__E1000_DOWN, &adapter->flags);
1394 * e1000_alloc_queues - Allocate memory for all rings
1395 * @adapter: board private structure to initialize
1397 * We allocate one ring per queue at run-time since we don't know the
1398 * number of queues at compile-time. The polling_netdev array is
1399 * intended for Multiqueue, but should work fine with a single queue.
1402 static int __devinit e1000_alloc_queues(struct e1000_adapter *adapter)
1404 adapter->tx_ring = kcalloc(adapter->num_tx_queues,
1405 sizeof(struct e1000_tx_ring), GFP_KERNEL);
1406 if (!adapter->tx_ring)
1409 adapter->rx_ring = kcalloc(adapter->num_rx_queues,
1410 sizeof(struct e1000_rx_ring), GFP_KERNEL);
1411 if (!adapter->rx_ring) {
1412 kfree(adapter->tx_ring);
1416 adapter->polling_netdev = kcalloc(adapter->num_rx_queues,
1417 sizeof(struct net_device),
1419 if (!adapter->polling_netdev) {
1420 kfree(adapter->tx_ring);
1421 kfree(adapter->rx_ring);
1425 return E1000_SUCCESS;
1429 * e1000_open - Called when a network interface is made active
1430 * @netdev: network interface device structure
1432 * Returns 0 on success, negative value on failure
1434 * The open entry point is called when a network interface is made
1435 * active by the system (IFF_UP). At this point all resources needed
1436 * for transmit and receive operations are allocated, the interrupt
1437 * handler is registered with the OS, the watchdog timer is started,
1438 * and the stack is notified that the interface is ready.
1441 static int e1000_open(struct net_device *netdev)
1443 struct e1000_adapter *adapter = netdev_priv(netdev);
1444 struct e1000_hw *hw = &adapter->hw;
1447 /* disallow open during test */
1448 if (test_bit(__E1000_TESTING, &adapter->flags))
1451 /* allocate transmit descriptors */
1452 err = e1000_setup_all_tx_resources(adapter);
1456 /* allocate receive descriptors */
1457 err = e1000_setup_all_rx_resources(adapter);
1461 e1000_power_up_phy(adapter);
1463 adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
1464 if ((hw->mng_cookie.status &
1465 E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT)) {
1466 e1000_update_mng_vlan(adapter);
1469 /* If AMT is enabled, let the firmware know that the network
1470 * interface is now open */
1471 if (hw->mac_type == e1000_82573 &&
1472 e1000_check_mng_mode(hw))
1473 e1000_get_hw_control(adapter);
1475 /* before we allocate an interrupt, we must be ready to handle it.
1476 * Setting DEBUG_SHIRQ in the kernel makes it fire an interrupt
1477 * as soon as we call pci_request_irq, so we have to setup our
1478 * clean_rx handler before we do so. */
1479 e1000_configure(adapter);
1481 err = e1000_request_irq(adapter);
1485 /* From here on the code is the same as e1000_up() */
1486 clear_bit(__E1000_DOWN, &adapter->flags);
1488 napi_enable(&adapter->napi);
1490 e1000_irq_enable(adapter);
1492 netif_start_queue(netdev);
1494 /* fire a link status change interrupt to start the watchdog */
1495 ew32(ICS, E1000_ICS_LSC);
1497 return E1000_SUCCESS;
1500 e1000_release_hw_control(adapter);
1501 e1000_power_down_phy(adapter);
1502 e1000_free_all_rx_resources(adapter);
1504 e1000_free_all_tx_resources(adapter);
1506 e1000_reset(adapter);
1512 * e1000_close - Disables a network interface
1513 * @netdev: network interface device structure
1515 * Returns 0, this is not allowed to fail
1517 * The close entry point is called when an interface is de-activated
1518 * by the OS. The hardware is still under the drivers control, but
1519 * needs to be disabled. A global MAC reset is issued to stop the
1520 * hardware, and all transmit and receive resources are freed.
1523 static int e1000_close(struct net_device *netdev)
1525 struct e1000_adapter *adapter = netdev_priv(netdev);
1526 struct e1000_hw *hw = &adapter->hw;
1528 WARN_ON(test_bit(__E1000_RESETTING, &adapter->flags));
1529 e1000_down(adapter);
1530 e1000_power_down_phy(adapter);
1531 e1000_free_irq(adapter);
1533 e1000_free_all_tx_resources(adapter);
1534 e1000_free_all_rx_resources(adapter);
1536 /* kill manageability vlan ID if supported, but not if a vlan with
1537 * the same ID is registered on the host OS (let 8021q kill it) */
1538 if ((hw->mng_cookie.status &
1539 E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) &&
1541 vlan_group_get_device(adapter->vlgrp, adapter->mng_vlan_id))) {
1542 e1000_vlan_rx_kill_vid(netdev, adapter->mng_vlan_id);
1545 /* If AMT is enabled, let the firmware know that the network
1546 * interface is now closed */
1547 if (hw->mac_type == e1000_82573 &&
1548 e1000_check_mng_mode(hw))
1549 e1000_release_hw_control(adapter);
1555 * e1000_check_64k_bound - check that memory doesn't cross 64kB boundary
1556 * @adapter: address of board private structure
1557 * @start: address of beginning of memory
1558 * @len: length of memory
1560 static bool e1000_check_64k_bound(struct e1000_adapter *adapter, void *start,
1563 struct e1000_hw *hw = &adapter->hw;
1564 unsigned long begin = (unsigned long)start;
1565 unsigned long end = begin + len;
1567 /* First rev 82545 and 82546 need to not allow any memory
1568 * write location to cross 64k boundary due to errata 23 */
1569 if (hw->mac_type == e1000_82545 ||
1570 hw->mac_type == e1000_82546) {
1571 return ((begin ^ (end - 1)) >> 16) != 0 ? false : true;
1578 * e1000_setup_tx_resources - allocate Tx resources (Descriptors)
1579 * @adapter: board private structure
1580 * @txdr: tx descriptor ring (for a specific queue) to setup
1582 * Return 0 on success, negative on failure
1585 static int e1000_setup_tx_resources(struct e1000_adapter *adapter,
1586 struct e1000_tx_ring *txdr)
1588 struct pci_dev *pdev = adapter->pdev;
1591 size = sizeof(struct e1000_buffer) * txdr->count;
1592 txdr->buffer_info = vmalloc(size);
1593 if (!txdr->buffer_info) {
1595 "Unable to allocate memory for the transmit descriptor ring\n");
1598 memset(txdr->buffer_info, 0, size);
1600 /* round up to nearest 4K */
1602 txdr->size = txdr->count * sizeof(struct e1000_tx_desc);
1603 txdr->size = ALIGN(txdr->size, 4096);
1605 txdr->desc = pci_alloc_consistent(pdev, txdr->size, &txdr->dma);
1608 vfree(txdr->buffer_info);
1610 "Unable to allocate memory for the transmit descriptor ring\n");
1614 /* Fix for errata 23, can't cross 64kB boundary */
1615 if (!e1000_check_64k_bound(adapter, txdr->desc, txdr->size)) {
1616 void *olddesc = txdr->desc;
1617 dma_addr_t olddma = txdr->dma;
1618 DPRINTK(TX_ERR, ERR, "txdr align check failed: %u bytes "
1619 "at %p\n", txdr->size, txdr->desc);
1620 /* Try again, without freeing the previous */
1621 txdr->desc = pci_alloc_consistent(pdev, txdr->size, &txdr->dma);
1622 /* Failed allocation, critical failure */
1624 pci_free_consistent(pdev, txdr->size, olddesc, olddma);
1625 goto setup_tx_desc_die;
1628 if (!e1000_check_64k_bound(adapter, txdr->desc, txdr->size)) {
1630 pci_free_consistent(pdev, txdr->size, txdr->desc,
1632 pci_free_consistent(pdev, txdr->size, olddesc, olddma);
1634 "Unable to allocate aligned memory "
1635 "for the transmit descriptor ring\n");
1636 vfree(txdr->buffer_info);
1639 /* Free old allocation, new allocation was successful */
1640 pci_free_consistent(pdev, txdr->size, olddesc, olddma);
1643 memset(txdr->desc, 0, txdr->size);
1645 txdr->next_to_use = 0;
1646 txdr->next_to_clean = 0;
1647 spin_lock_init(&txdr->tx_lock);
1653 * e1000_setup_all_tx_resources - wrapper to allocate Tx resources
1654 * (Descriptors) for all queues
1655 * @adapter: board private structure
1657 * Return 0 on success, negative on failure
1660 int e1000_setup_all_tx_resources(struct e1000_adapter *adapter)
1664 for (i = 0; i < adapter->num_tx_queues; i++) {
1665 err = e1000_setup_tx_resources(adapter, &adapter->tx_ring[i]);
1668 "Allocation for Tx Queue %u failed\n", i);
1669 for (i-- ; i >= 0; i--)
1670 e1000_free_tx_resources(adapter,
1671 &adapter->tx_ring[i]);
1680 * e1000_configure_tx - Configure 8254x Transmit Unit after Reset
1681 * @adapter: board private structure
1683 * Configure the Tx unit of the MAC after a reset.
1686 static void e1000_configure_tx(struct e1000_adapter *adapter)
1689 struct e1000_hw *hw = &adapter->hw;
1690 u32 tdlen, tctl, tipg, tarc;
1693 /* Setup the HW Tx Head and Tail descriptor pointers */
1695 switch (adapter->num_tx_queues) {
1698 tdba = adapter->tx_ring[0].dma;
1699 tdlen = adapter->tx_ring[0].count *
1700 sizeof(struct e1000_tx_desc);
1702 ew32(TDBAH, (tdba >> 32));
1703 ew32(TDBAL, (tdba & 0x00000000ffffffffULL));
1706 adapter->tx_ring[0].tdh = ((hw->mac_type >= e1000_82543) ? E1000_TDH : E1000_82542_TDH);
1707 adapter->tx_ring[0].tdt = ((hw->mac_type >= e1000_82543) ? E1000_TDT : E1000_82542_TDT);
1711 /* Set the default values for the Tx Inter Packet Gap timer */
1712 if (hw->mac_type <= e1000_82547_rev_2 &&
1713 (hw->media_type == e1000_media_type_fiber ||
1714 hw->media_type == e1000_media_type_internal_serdes))
1715 tipg = DEFAULT_82543_TIPG_IPGT_FIBER;
1717 tipg = DEFAULT_82543_TIPG_IPGT_COPPER;
1719 switch (hw->mac_type) {
1720 case e1000_82542_rev2_0:
1721 case e1000_82542_rev2_1:
1722 tipg = DEFAULT_82542_TIPG_IPGT;
1723 ipgr1 = DEFAULT_82542_TIPG_IPGR1;
1724 ipgr2 = DEFAULT_82542_TIPG_IPGR2;
1726 case e1000_80003es2lan:
1727 ipgr1 = DEFAULT_82543_TIPG_IPGR1;
1728 ipgr2 = DEFAULT_80003ES2LAN_TIPG_IPGR2;
1731 ipgr1 = DEFAULT_82543_TIPG_IPGR1;
1732 ipgr2 = DEFAULT_82543_TIPG_IPGR2;
1735 tipg |= ipgr1 << E1000_TIPG_IPGR1_SHIFT;
1736 tipg |= ipgr2 << E1000_TIPG_IPGR2_SHIFT;
1739 /* Set the Tx Interrupt Delay register */
1741 ew32(TIDV, adapter->tx_int_delay);
1742 if (hw->mac_type >= e1000_82540)
1743 ew32(TADV, adapter->tx_abs_int_delay);
1745 /* Program the Transmit Control Register */
1748 tctl &= ~E1000_TCTL_CT;
1749 tctl |= E1000_TCTL_PSP | E1000_TCTL_RTLC |
1750 (E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT);
1752 if (hw->mac_type == e1000_82571 || hw->mac_type == e1000_82572) {
1754 /* set the speed mode bit, we'll clear it if we're not at
1755 * gigabit link later */
1758 } else if (hw->mac_type == e1000_80003es2lan) {
1767 e1000_config_collision_dist(hw);
1769 /* Setup Transmit Descriptor Settings for eop descriptor */
1770 adapter->txd_cmd = E1000_TXD_CMD_EOP | E1000_TXD_CMD_IFCS;
1772 /* only set IDE if we are delaying interrupts using the timers */
1773 if (adapter->tx_int_delay)
1774 adapter->txd_cmd |= E1000_TXD_CMD_IDE;
1776 if (hw->mac_type < e1000_82543)
1777 adapter->txd_cmd |= E1000_TXD_CMD_RPS;
1779 adapter->txd_cmd |= E1000_TXD_CMD_RS;
1781 /* Cache if we're 82544 running in PCI-X because we'll
1782 * need this to apply a workaround later in the send path. */
1783 if (hw->mac_type == e1000_82544 &&
1784 hw->bus_type == e1000_bus_type_pcix)
1785 adapter->pcix_82544 = 1;
1792 * e1000_setup_rx_resources - allocate Rx resources (Descriptors)
1793 * @adapter: board private structure
1794 * @rxdr: rx descriptor ring (for a specific queue) to setup
1796 * Returns 0 on success, negative on failure
1799 static int e1000_setup_rx_resources(struct e1000_adapter *adapter,
1800 struct e1000_rx_ring *rxdr)
1802 struct e1000_hw *hw = &adapter->hw;
1803 struct pci_dev *pdev = adapter->pdev;
1806 size = sizeof(struct e1000_buffer) * rxdr->count;
1807 rxdr->buffer_info = vmalloc(size);
1808 if (!rxdr->buffer_info) {
1810 "Unable to allocate memory for the receive descriptor ring\n");
1813 memset(rxdr->buffer_info, 0, size);
1815 if (hw->mac_type <= e1000_82547_rev_2)
1816 desc_len = sizeof(struct e1000_rx_desc);
1818 desc_len = sizeof(union e1000_rx_desc_packet_split);
1820 /* Round up to nearest 4K */
1822 rxdr->size = rxdr->count * desc_len;
1823 rxdr->size = ALIGN(rxdr->size, 4096);
1825 rxdr->desc = pci_alloc_consistent(pdev, rxdr->size, &rxdr->dma);
1829 "Unable to allocate memory for the receive descriptor ring\n");
1831 vfree(rxdr->buffer_info);
1835 /* Fix for errata 23, can't cross 64kB boundary */
1836 if (!e1000_check_64k_bound(adapter, rxdr->desc, rxdr->size)) {
1837 void *olddesc = rxdr->desc;
1838 dma_addr_t olddma = rxdr->dma;
1839 DPRINTK(RX_ERR, ERR, "rxdr align check failed: %u bytes "
1840 "at %p\n", rxdr->size, rxdr->desc);
1841 /* Try again, without freeing the previous */
1842 rxdr->desc = pci_alloc_consistent(pdev, rxdr->size, &rxdr->dma);
1843 /* Failed allocation, critical failure */
1845 pci_free_consistent(pdev, rxdr->size, olddesc, olddma);
1847 "Unable to allocate memory "
1848 "for the receive descriptor ring\n");
1849 goto setup_rx_desc_die;
1852 if (!e1000_check_64k_bound(adapter, rxdr->desc, rxdr->size)) {
1854 pci_free_consistent(pdev, rxdr->size, rxdr->desc,
1856 pci_free_consistent(pdev, rxdr->size, olddesc, olddma);
1858 "Unable to allocate aligned memory "
1859 "for the receive descriptor ring\n");
1860 goto setup_rx_desc_die;
1862 /* Free old allocation, new allocation was successful */
1863 pci_free_consistent(pdev, rxdr->size, olddesc, olddma);
1866 memset(rxdr->desc, 0, rxdr->size);
1868 rxdr->next_to_clean = 0;
1869 rxdr->next_to_use = 0;
1875 * e1000_setup_all_rx_resources - wrapper to allocate Rx resources
1876 * (Descriptors) for all queues
1877 * @adapter: board private structure
1879 * Return 0 on success, negative on failure
1882 int e1000_setup_all_rx_resources(struct e1000_adapter *adapter)
1886 for (i = 0; i < adapter->num_rx_queues; i++) {
1887 err = e1000_setup_rx_resources(adapter, &adapter->rx_ring[i]);
1890 "Allocation for Rx Queue %u failed\n", i);
1891 for (i-- ; i >= 0; i--)
1892 e1000_free_rx_resources(adapter,
1893 &adapter->rx_ring[i]);
1902 * e1000_setup_rctl - configure the receive control registers
1903 * @adapter: Board private structure
1905 #define PAGE_USE_COUNT(S) (((S) >> PAGE_SHIFT) + \
1906 (((S) & (PAGE_SIZE - 1)) ? 1 : 0))
1907 static void e1000_setup_rctl(struct e1000_adapter *adapter)
1909 struct e1000_hw *hw = &adapter->hw;
1914 rctl &= ~(3 << E1000_RCTL_MO_SHIFT);
1916 rctl |= E1000_RCTL_EN | E1000_RCTL_BAM |
1917 E1000_RCTL_LBM_NO | E1000_RCTL_RDMTS_HALF |
1918 (hw->mc_filter_type << E1000_RCTL_MO_SHIFT);
1920 if (hw->tbi_compatibility_on == 1)
1921 rctl |= E1000_RCTL_SBP;
1923 rctl &= ~E1000_RCTL_SBP;
1925 if (adapter->netdev->mtu <= ETH_DATA_LEN)
1926 rctl &= ~E1000_RCTL_LPE;
1928 rctl |= E1000_RCTL_LPE;
1930 /* Setup buffer sizes */
1931 rctl &= ~E1000_RCTL_SZ_4096;
1932 rctl |= E1000_RCTL_BSEX;
1933 switch (adapter->rx_buffer_len) {
1934 case E1000_RXBUFFER_256:
1935 rctl |= E1000_RCTL_SZ_256;
1936 rctl &= ~E1000_RCTL_BSEX;
1938 case E1000_RXBUFFER_512:
1939 rctl |= E1000_RCTL_SZ_512;
1940 rctl &= ~E1000_RCTL_BSEX;
1942 case E1000_RXBUFFER_1024:
1943 rctl |= E1000_RCTL_SZ_1024;
1944 rctl &= ~E1000_RCTL_BSEX;
1946 case E1000_RXBUFFER_2048:
1948 rctl |= E1000_RCTL_SZ_2048;
1949 rctl &= ~E1000_RCTL_BSEX;
1951 case E1000_RXBUFFER_4096:
1952 rctl |= E1000_RCTL_SZ_4096;
1954 case E1000_RXBUFFER_8192:
1955 rctl |= E1000_RCTL_SZ_8192;
1957 case E1000_RXBUFFER_16384:
1958 rctl |= E1000_RCTL_SZ_16384;
1966 * e1000_configure_rx - Configure 8254x Receive Unit after Reset
1967 * @adapter: board private structure
1969 * Configure the Rx unit of the MAC after a reset.
1972 static void e1000_configure_rx(struct e1000_adapter *adapter)
1975 struct e1000_hw *hw = &adapter->hw;
1976 u32 rdlen, rctl, rxcsum, ctrl_ext;
1978 rdlen = adapter->rx_ring[0].count *
1979 sizeof(struct e1000_rx_desc);
1980 adapter->clean_rx = e1000_clean_rx_irq;
1981 adapter->alloc_rx_buf = e1000_alloc_rx_buffers;
1983 /* disable receives while setting up the descriptors */
1985 ew32(RCTL, rctl & ~E1000_RCTL_EN);
1987 /* set the Receive Delay Timer Register */
1988 ew32(RDTR, adapter->rx_int_delay);
1990 if (hw->mac_type >= e1000_82540) {
1991 ew32(RADV, adapter->rx_abs_int_delay);
1992 if (adapter->itr_setting != 0)
1993 ew32(ITR, 1000000000 / (adapter->itr * 256));
1996 if (hw->mac_type >= e1000_82571) {
1997 ctrl_ext = er32(CTRL_EXT);
1998 /* Reset delay timers after every interrupt */
1999 ctrl_ext |= E1000_CTRL_EXT_INT_TIMER_CLR;
2000 /* Auto-Mask interrupts upon ICR access */
2001 ctrl_ext |= E1000_CTRL_EXT_IAME;
2002 ew32(IAM, 0xffffffff);
2003 ew32(CTRL_EXT, ctrl_ext);
2004 E1000_WRITE_FLUSH();
2007 /* Setup the HW Rx Head and Tail Descriptor Pointers and
2008 * the Base and Length of the Rx Descriptor Ring */
2009 switch (adapter->num_rx_queues) {
2012 rdba = adapter->rx_ring[0].dma;
2014 ew32(RDBAH, (rdba >> 32));
2015 ew32(RDBAL, (rdba & 0x00000000ffffffffULL));
2018 adapter->rx_ring[0].rdh = ((hw->mac_type >= e1000_82543) ? E1000_RDH : E1000_82542_RDH);
2019 adapter->rx_ring[0].rdt = ((hw->mac_type >= e1000_82543) ? E1000_RDT : E1000_82542_RDT);
2023 /* Enable 82543 Receive Checksum Offload for TCP and UDP */
2024 if (hw->mac_type >= e1000_82543) {
2025 rxcsum = er32(RXCSUM);
2026 if (adapter->rx_csum)
2027 rxcsum |= E1000_RXCSUM_TUOFL;
2029 /* don't need to clear IPPCSE as it defaults to 0 */
2030 rxcsum &= ~E1000_RXCSUM_TUOFL;
2031 ew32(RXCSUM, rxcsum);
2034 /* Enable Receives */
2039 * e1000_free_tx_resources - Free Tx Resources per Queue
2040 * @adapter: board private structure
2041 * @tx_ring: Tx descriptor ring for a specific queue
2043 * Free all transmit software resources
2046 static void e1000_free_tx_resources(struct e1000_adapter *adapter,
2047 struct e1000_tx_ring *tx_ring)
2049 struct pci_dev *pdev = adapter->pdev;
2051 e1000_clean_tx_ring(adapter, tx_ring);
2053 vfree(tx_ring->buffer_info);
2054 tx_ring->buffer_info = NULL;
2056 pci_free_consistent(pdev, tx_ring->size, tx_ring->desc, tx_ring->dma);
2058 tx_ring->desc = NULL;
2062 * e1000_free_all_tx_resources - Free Tx Resources for All Queues
2063 * @adapter: board private structure
2065 * Free all transmit software resources
2068 void e1000_free_all_tx_resources(struct e1000_adapter *adapter)
2072 for (i = 0; i < adapter->num_tx_queues; i++)
2073 e1000_free_tx_resources(adapter, &adapter->tx_ring[i]);
2076 static void e1000_unmap_and_free_tx_resource(struct e1000_adapter *adapter,
2077 struct e1000_buffer *buffer_info)
2079 if (buffer_info->dma) {
2080 pci_unmap_page(adapter->pdev,
2082 buffer_info->length,
2084 buffer_info->dma = 0;
2086 if (buffer_info->skb) {
2087 dev_kfree_skb_any(buffer_info->skb);
2088 buffer_info->skb = NULL;
2090 /* buffer_info must be completely set up in the transmit path */
2094 * e1000_clean_tx_ring - Free Tx Buffers
2095 * @adapter: board private structure
2096 * @tx_ring: ring to be cleaned
2099 static void e1000_clean_tx_ring(struct e1000_adapter *adapter,
2100 struct e1000_tx_ring *tx_ring)
2102 struct e1000_hw *hw = &adapter->hw;
2103 struct e1000_buffer *buffer_info;
2107 /* Free all the Tx ring sk_buffs */
2109 for (i = 0; i < tx_ring->count; i++) {
2110 buffer_info = &tx_ring->buffer_info[i];
2111 e1000_unmap_and_free_tx_resource(adapter, buffer_info);
2114 size = sizeof(struct e1000_buffer) * tx_ring->count;
2115 memset(tx_ring->buffer_info, 0, size);
2117 /* Zero out the descriptor ring */
2119 memset(tx_ring->desc, 0, tx_ring->size);
2121 tx_ring->next_to_use = 0;
2122 tx_ring->next_to_clean = 0;
2123 tx_ring->last_tx_tso = 0;
2125 writel(0, hw->hw_addr + tx_ring->tdh);
2126 writel(0, hw->hw_addr + tx_ring->tdt);
2130 * e1000_clean_all_tx_rings - Free Tx Buffers for all queues
2131 * @adapter: board private structure
2134 static void e1000_clean_all_tx_rings(struct e1000_adapter *adapter)
2138 for (i = 0; i < adapter->num_tx_queues; i++)
2139 e1000_clean_tx_ring(adapter, &adapter->tx_ring[i]);
2143 * e1000_free_rx_resources - Free Rx Resources
2144 * @adapter: board private structure
2145 * @rx_ring: ring to clean the resources from
2147 * Free all receive software resources
2150 static void e1000_free_rx_resources(struct e1000_adapter *adapter,
2151 struct e1000_rx_ring *rx_ring)
2153 struct pci_dev *pdev = adapter->pdev;
2155 e1000_clean_rx_ring(adapter, rx_ring);
2157 vfree(rx_ring->buffer_info);
2158 rx_ring->buffer_info = NULL;
2160 pci_free_consistent(pdev, rx_ring->size, rx_ring->desc, rx_ring->dma);
2162 rx_ring->desc = NULL;
2166 * e1000_free_all_rx_resources - Free Rx Resources for All Queues
2167 * @adapter: board private structure
2169 * Free all receive software resources
2172 void e1000_free_all_rx_resources(struct e1000_adapter *adapter)
2176 for (i = 0; i < adapter->num_rx_queues; i++)
2177 e1000_free_rx_resources(adapter, &adapter->rx_ring[i]);
2181 * e1000_clean_rx_ring - Free Rx Buffers per Queue
2182 * @adapter: board private structure
2183 * @rx_ring: ring to free buffers from
2186 static void e1000_clean_rx_ring(struct e1000_adapter *adapter,
2187 struct e1000_rx_ring *rx_ring)
2189 struct e1000_hw *hw = &adapter->hw;
2190 struct e1000_buffer *buffer_info;
2191 struct pci_dev *pdev = adapter->pdev;
2195 /* Free all the Rx ring sk_buffs */
2196 for (i = 0; i < rx_ring->count; i++) {
2197 buffer_info = &rx_ring->buffer_info[i];
2198 if (buffer_info->skb) {
2199 pci_unmap_single(pdev,
2201 buffer_info->length,
2202 PCI_DMA_FROMDEVICE);
2204 dev_kfree_skb(buffer_info->skb);
2205 buffer_info->skb = NULL;
2209 size = sizeof(struct e1000_buffer) * rx_ring->count;
2210 memset(rx_ring->buffer_info, 0, size);
2212 /* Zero out the descriptor ring */
2214 memset(rx_ring->desc, 0, rx_ring->size);
2216 rx_ring->next_to_clean = 0;
2217 rx_ring->next_to_use = 0;
2219 writel(0, hw->hw_addr + rx_ring->rdh);
2220 writel(0, hw->hw_addr + rx_ring->rdt);
2224 * e1000_clean_all_rx_rings - Free Rx Buffers for all queues
2225 * @adapter: board private structure
2228 static void e1000_clean_all_rx_rings(struct e1000_adapter *adapter)
2232 for (i = 0; i < adapter->num_rx_queues; i++)
2233 e1000_clean_rx_ring(adapter, &adapter->rx_ring[i]);
2236 /* The 82542 2.0 (revision 2) needs to have the receive unit in reset
2237 * and memory write and invalidate disabled for certain operations
2239 static void e1000_enter_82542_rst(struct e1000_adapter *adapter)
2241 struct e1000_hw *hw = &adapter->hw;
2242 struct net_device *netdev = adapter->netdev;
2245 e1000_pci_clear_mwi(hw);
2248 rctl |= E1000_RCTL_RST;
2250 E1000_WRITE_FLUSH();
2253 if (netif_running(netdev))
2254 e1000_clean_all_rx_rings(adapter);
2257 static void e1000_leave_82542_rst(struct e1000_adapter *adapter)
2259 struct e1000_hw *hw = &adapter->hw;
2260 struct net_device *netdev = adapter->netdev;
2264 rctl &= ~E1000_RCTL_RST;
2266 E1000_WRITE_FLUSH();
2269 if (hw->pci_cmd_word & PCI_COMMAND_INVALIDATE)
2270 e1000_pci_set_mwi(hw);
2272 if (netif_running(netdev)) {
2273 /* No need to loop, because 82542 supports only 1 queue */
2274 struct e1000_rx_ring *ring = &adapter->rx_ring[0];
2275 e1000_configure_rx(adapter);
2276 adapter->alloc_rx_buf(adapter, ring, E1000_DESC_UNUSED(ring));
2281 * e1000_set_mac - Change the Ethernet Address of the NIC
2282 * @netdev: network interface device structure
2283 * @p: pointer to an address structure
2285 * Returns 0 on success, negative on failure
2288 static int e1000_set_mac(struct net_device *netdev, void *p)
2290 struct e1000_adapter *adapter = netdev_priv(netdev);
2291 struct e1000_hw *hw = &adapter->hw;
2292 struct sockaddr *addr = p;
2294 if (!is_valid_ether_addr(addr->sa_data))
2295 return -EADDRNOTAVAIL;
2297 /* 82542 2.0 needs to be in reset to write receive address registers */
2299 if (hw->mac_type == e1000_82542_rev2_0)
2300 e1000_enter_82542_rst(adapter);
2302 memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
2303 memcpy(hw->mac_addr, addr->sa_data, netdev->addr_len);
2305 e1000_rar_set(hw, hw->mac_addr, 0);
2307 /* With 82571 controllers, LAA may be overwritten (with the default)
2308 * due to controller reset from the other port. */
2309 if (hw->mac_type == e1000_82571) {
2310 /* activate the work around */
2311 hw->laa_is_present = 1;
2313 /* Hold a copy of the LAA in RAR[14] This is done so that
2314 * between the time RAR[0] gets clobbered and the time it
2315 * gets fixed (in e1000_watchdog), the actual LAA is in one
2316 * of the RARs and no incoming packets directed to this port
2317 * are dropped. Eventaully the LAA will be in RAR[0] and
2319 e1000_rar_set(hw, hw->mac_addr,
2320 E1000_RAR_ENTRIES - 1);
2323 if (hw->mac_type == e1000_82542_rev2_0)
2324 e1000_leave_82542_rst(adapter);
2330 * e1000_set_rx_mode - Secondary Unicast, Multicast and Promiscuous mode set
2331 * @netdev: network interface device structure
2333 * The set_rx_mode entry point is called whenever the unicast or multicast
2334 * address lists or the network interface flags are updated. This routine is
2335 * responsible for configuring the hardware for proper unicast, multicast,
2336 * promiscuous mode, and all-multi behavior.
2339 static void e1000_set_rx_mode(struct net_device *netdev)
2341 struct e1000_adapter *adapter = netdev_priv(netdev);
2342 struct e1000_hw *hw = &adapter->hw;
2343 struct dev_addr_list *uc_ptr;
2344 struct dev_addr_list *mc_ptr;
2347 int i, rar_entries = E1000_RAR_ENTRIES;
2348 int mta_reg_count = (hw->mac_type == e1000_ich8lan) ?
2349 E1000_NUM_MTA_REGISTERS_ICH8LAN :
2350 E1000_NUM_MTA_REGISTERS;
2352 if (hw->mac_type == e1000_ich8lan)
2353 rar_entries = E1000_RAR_ENTRIES_ICH8LAN;
2355 /* reserve RAR[14] for LAA over-write work-around */
2356 if (hw->mac_type == e1000_82571)
2359 /* Check for Promiscuous and All Multicast modes */
2363 if (netdev->flags & IFF_PROMISC) {
2364 rctl |= (E1000_RCTL_UPE | E1000_RCTL_MPE);
2365 rctl &= ~E1000_RCTL_VFE;
2367 if (netdev->flags & IFF_ALLMULTI) {
2368 rctl |= E1000_RCTL_MPE;
2370 rctl &= ~E1000_RCTL_MPE;
2372 if (adapter->hw.mac_type != e1000_ich8lan)
2373 rctl |= E1000_RCTL_VFE;
2377 if (netdev->uc_count > rar_entries - 1) {
2378 rctl |= E1000_RCTL_UPE;
2379 } else if (!(netdev->flags & IFF_PROMISC)) {
2380 rctl &= ~E1000_RCTL_UPE;
2381 uc_ptr = netdev->uc_list;
2386 /* 82542 2.0 needs to be in reset to write receive address registers */
2388 if (hw->mac_type == e1000_82542_rev2_0)
2389 e1000_enter_82542_rst(adapter);
2391 /* load the first 14 addresses into the exact filters 1-14. Unicast
2392 * addresses take precedence to avoid disabling unicast filtering
2395 * RAR 0 is used for the station MAC adddress
2396 * if there are not 14 addresses, go ahead and clear the filters
2397 * -- with 82571 controllers only 0-13 entries are filled here
2399 mc_ptr = netdev->mc_list;
2401 for (i = 1; i < rar_entries; i++) {
2403 e1000_rar_set(hw, uc_ptr->da_addr, i);
2404 uc_ptr = uc_ptr->next;
2405 } else if (mc_ptr) {
2406 e1000_rar_set(hw, mc_ptr->da_addr, i);
2407 mc_ptr = mc_ptr->next;
2409 E1000_WRITE_REG_ARRAY(hw, RA, i << 1, 0);
2410 E1000_WRITE_FLUSH();
2411 E1000_WRITE_REG_ARRAY(hw, RA, (i << 1) + 1, 0);
2412 E1000_WRITE_FLUSH();
2415 WARN_ON(uc_ptr != NULL);
2417 /* clear the old settings from the multicast hash table */
2419 for (i = 0; i < mta_reg_count; i++) {
2420 E1000_WRITE_REG_ARRAY(hw, MTA, i, 0);
2421 E1000_WRITE_FLUSH();
2424 /* load any remaining addresses into the hash table */
2426 for (; mc_ptr; mc_ptr = mc_ptr->next) {
2427 hash_value = e1000_hash_mc_addr(hw, mc_ptr->da_addr);
2428 e1000_mta_set(hw, hash_value);
2431 if (hw->mac_type == e1000_82542_rev2_0)
2432 e1000_leave_82542_rst(adapter);
2435 /* Need to wait a few seconds after link up to get diagnostic information from
2438 static void e1000_update_phy_info(unsigned long data)
2440 struct e1000_adapter *adapter = (struct e1000_adapter *)data;
2441 struct e1000_hw *hw = &adapter->hw;
2442 e1000_phy_get_info(hw, &adapter->phy_info);
2446 * e1000_82547_tx_fifo_stall - Timer Call-back
2447 * @data: pointer to adapter cast into an unsigned long
2450 static void e1000_82547_tx_fifo_stall(unsigned long data)
2452 struct e1000_adapter *adapter = (struct e1000_adapter *)data;
2453 struct e1000_hw *hw = &adapter->hw;
2454 struct net_device *netdev = adapter->netdev;
2457 if (atomic_read(&adapter->tx_fifo_stall)) {
2458 if ((er32(TDT) == er32(TDH)) &&
2459 (er32(TDFT) == er32(TDFH)) &&
2460 (er32(TDFTS) == er32(TDFHS))) {
2462 ew32(TCTL, tctl & ~E1000_TCTL_EN);
2463 ew32(TDFT, adapter->tx_head_addr);
2464 ew32(TDFH, adapter->tx_head_addr);
2465 ew32(TDFTS, adapter->tx_head_addr);
2466 ew32(TDFHS, adapter->tx_head_addr);
2468 E1000_WRITE_FLUSH();
2470 adapter->tx_fifo_head = 0;
2471 atomic_set(&adapter->tx_fifo_stall, 0);
2472 netif_wake_queue(netdev);
2474 mod_timer(&adapter->tx_fifo_stall_timer, jiffies + 1);
2480 * e1000_watchdog - Timer Call-back
2481 * @data: pointer to adapter cast into an unsigned long
2483 static void e1000_watchdog(unsigned long data)
2485 struct e1000_adapter *adapter = (struct e1000_adapter *)data;
2486 struct e1000_hw *hw = &adapter->hw;
2487 struct net_device *netdev = adapter->netdev;
2488 struct e1000_tx_ring *txdr = adapter->tx_ring;
2492 ret_val = e1000_check_for_link(hw);
2493 if ((ret_val == E1000_ERR_PHY) &&
2494 (hw->phy_type == e1000_phy_igp_3) &&
2495 (er32(CTRL) & E1000_PHY_CTRL_GBE_DISABLE)) {
2496 /* See e1000_kumeran_lock_loss_workaround() */
2498 "Gigabit has been disabled, downgrading speed\n");
2501 if (hw->mac_type == e1000_82573) {
2502 e1000_enable_tx_pkt_filtering(hw);
2503 if (adapter->mng_vlan_id != hw->mng_cookie.vlan_id)
2504 e1000_update_mng_vlan(adapter);
2507 if ((hw->media_type == e1000_media_type_internal_serdes) &&
2508 !(er32(TXCW) & E1000_TXCW_ANE))
2509 link = !hw->serdes_link_down;
2511 link = er32(STATUS) & E1000_STATUS_LU;
2514 if (!netif_carrier_ok(netdev)) {
2517 e1000_get_speed_and_duplex(hw,
2518 &adapter->link_speed,
2519 &adapter->link_duplex);
2522 DPRINTK(LINK, INFO, "NIC Link is Up %d Mbps %s, "
2523 "Flow Control: %s\n",
2524 adapter->link_speed,
2525 adapter->link_duplex == FULL_DUPLEX ?
2526 "Full Duplex" : "Half Duplex",
2527 ((ctrl & E1000_CTRL_TFCE) && (ctrl &
2528 E1000_CTRL_RFCE)) ? "RX/TX" : ((ctrl &
2529 E1000_CTRL_RFCE) ? "RX" : ((ctrl &
2530 E1000_CTRL_TFCE) ? "TX" : "None" )));
2532 /* tweak tx_queue_len according to speed/duplex
2533 * and adjust the timeout factor */
2534 netdev->tx_queue_len = adapter->tx_queue_len;
2535 adapter->tx_timeout_factor = 1;
2536 switch (adapter->link_speed) {
2539 netdev->tx_queue_len = 10;
2540 adapter->tx_timeout_factor = 8;
2544 netdev->tx_queue_len = 100;
2545 /* maybe add some timeout factor ? */
2549 if ((hw->mac_type == e1000_82571 ||
2550 hw->mac_type == e1000_82572) &&
2553 tarc0 = er32(TARC0);
2554 tarc0 &= ~(1 << 21);
2558 /* disable TSO for pcie and 10/100 speeds, to avoid
2559 * some hardware issues */
2560 if (!adapter->tso_force &&
2561 hw->bus_type == e1000_bus_type_pci_express){
2562 switch (adapter->link_speed) {
2566 "10/100 speed: disabling TSO\n");
2567 netdev->features &= ~NETIF_F_TSO;
2568 netdev->features &= ~NETIF_F_TSO6;
2571 netdev->features |= NETIF_F_TSO;
2572 netdev->features |= NETIF_F_TSO6;
2580 /* enable transmits in the hardware, need to do this
2581 * after setting TARC0 */
2583 tctl |= E1000_TCTL_EN;
2586 netif_carrier_on(netdev);
2587 netif_wake_queue(netdev);
2588 mod_timer(&adapter->phy_info_timer, round_jiffies(jiffies + 2 * HZ));
2589 adapter->smartspeed = 0;
2591 /* make sure the receive unit is started */
2592 if (hw->rx_needs_kicking) {
2593 u32 rctl = er32(RCTL);
2594 ew32(RCTL, rctl | E1000_RCTL_EN);
2598 if (netif_carrier_ok(netdev)) {
2599 adapter->link_speed = 0;
2600 adapter->link_duplex = 0;
2601 DPRINTK(LINK, INFO, "NIC Link is Down\n");
2602 netif_carrier_off(netdev);
2603 netif_stop_queue(netdev);
2604 mod_timer(&adapter->phy_info_timer, round_jiffies(jiffies + 2 * HZ));
2606 /* 80003ES2LAN workaround--
2607 * For packet buffer work-around on link down event;
2608 * disable receives in the ISR and
2609 * reset device here in the watchdog
2611 if (hw->mac_type == e1000_80003es2lan)
2613 schedule_work(&adapter->reset_task);
2616 e1000_smartspeed(adapter);
2619 e1000_update_stats(adapter);
2621 hw->tx_packet_delta = adapter->stats.tpt - adapter->tpt_old;
2622 adapter->tpt_old = adapter->stats.tpt;
2623 hw->collision_delta = adapter->stats.colc - adapter->colc_old;
2624 adapter->colc_old = adapter->stats.colc;
2626 adapter->gorcl = adapter->stats.gorcl - adapter->gorcl_old;
2627 adapter->gorcl_old = adapter->stats.gorcl;
2628 adapter->gotcl = adapter->stats.gotcl - adapter->gotcl_old;
2629 adapter->gotcl_old = adapter->stats.gotcl;
2631 e1000_update_adaptive(hw);
2633 if (!netif_carrier_ok(netdev)) {
2634 if (E1000_DESC_UNUSED(txdr) + 1 < txdr->count) {
2635 /* We've lost link, so the controller stops DMA,
2636 * but we've got queued Tx work that's never going
2637 * to get done, so reset controller to flush Tx.
2638 * (Do the reset outside of interrupt context). */
2639 adapter->tx_timeout_count++;
2640 schedule_work(&adapter->reset_task);
2644 /* Cause software interrupt to ensure rx ring is cleaned */
2645 ew32(ICS, E1000_ICS_RXDMT0);
2647 /* Force detection of hung controller every watchdog period */
2648 adapter->detect_tx_hung = true;
2650 /* With 82571 controllers, LAA may be overwritten due to controller
2651 * reset from the other port. Set the appropriate LAA in RAR[0] */
2652 if (hw->mac_type == e1000_82571 && hw->laa_is_present)
2653 e1000_rar_set(hw, hw->mac_addr, 0);
2655 /* Reset the timer */
2656 mod_timer(&adapter->watchdog_timer, round_jiffies(jiffies + 2 * HZ));
2659 enum latency_range {
2663 latency_invalid = 255
2667 * e1000_update_itr - update the dynamic ITR value based on statistics
2668 * Stores a new ITR value based on packets and byte
2669 * counts during the last interrupt. The advantage of per interrupt
2670 * computation is faster updates and more accurate ITR for the current
2671 * traffic pattern. Constants in this function were computed
2672 * based on theoretical maximum wire speed and thresholds were set based
2673 * on testing data as well as attempting to minimize response time
2674 * while increasing bulk throughput.
2675 * this functionality is controlled by the InterruptThrottleRate module
2676 * parameter (see e1000_param.c)
2677 * @adapter: pointer to adapter
2678 * @itr_setting: current adapter->itr
2679 * @packets: the number of packets during this measurement interval
2680 * @bytes: the number of bytes during this measurement interval
2682 static unsigned int e1000_update_itr(struct e1000_adapter *adapter,
2683 u16 itr_setting, int packets, int bytes)
2685 unsigned int retval = itr_setting;
2686 struct e1000_hw *hw = &adapter->hw;
2688 if (unlikely(hw->mac_type < e1000_82540))
2689 goto update_itr_done;
2692 goto update_itr_done;
2694 switch (itr_setting) {
2695 case lowest_latency:
2696 /* jumbo frames get bulk treatment*/
2697 if (bytes/packets > 8000)
2698 retval = bulk_latency;
2699 else if ((packets < 5) && (bytes > 512))
2700 retval = low_latency;
2702 case low_latency: /* 50 usec aka 20000 ints/s */
2703 if (bytes > 10000) {
2704 /* jumbo frames need bulk latency setting */
2705 if (bytes/packets > 8000)
2706 retval = bulk_latency;
2707 else if ((packets < 10) || ((bytes/packets) > 1200))
2708 retval = bulk_latency;
2709 else if ((packets > 35))
2710 retval = lowest_latency;
2711 } else if (bytes/packets > 2000)
2712 retval = bulk_latency;
2713 else if (packets <= 2 && bytes < 512)
2714 retval = lowest_latency;
2716 case bulk_latency: /* 250 usec aka 4000 ints/s */
2717 if (bytes > 25000) {
2719 retval = low_latency;
2720 } else if (bytes < 6000) {
2721 retval = low_latency;
2730 static void e1000_set_itr(struct e1000_adapter *adapter)
2732 struct e1000_hw *hw = &adapter->hw;
2734 u32 new_itr = adapter->itr;
2736 if (unlikely(hw->mac_type < e1000_82540))
2739 /* for non-gigabit speeds, just fix the interrupt rate at 4000 */
2740 if (unlikely(adapter->link_speed != SPEED_1000)) {
2746 adapter->tx_itr = e1000_update_itr(adapter,
2748 adapter->total_tx_packets,
2749 adapter->total_tx_bytes);
2750 /* conservative mode (itr 3) eliminates the lowest_latency setting */
2751 if (adapter->itr_setting == 3 && adapter->tx_itr == lowest_latency)
2752 adapter->tx_itr = low_latency;
2754 adapter->rx_itr = e1000_update_itr(adapter,
2756 adapter->total_rx_packets,
2757 adapter->total_rx_bytes);
2758 /* conservative mode (itr 3) eliminates the lowest_latency setting */
2759 if (adapter->itr_setting == 3 && adapter->rx_itr == lowest_latency)
2760 adapter->rx_itr = low_latency;
2762 current_itr = max(adapter->rx_itr, adapter->tx_itr);
2764 switch (current_itr) {
2765 /* counts and packets in update_itr are dependent on these numbers */
2766 case lowest_latency:
2770 new_itr = 20000; /* aka hwitr = ~200 */
2780 if (new_itr != adapter->itr) {
2781 /* this attempts to bias the interrupt rate towards Bulk
2782 * by adding intermediate steps when interrupt rate is
2784 new_itr = new_itr > adapter->itr ?
2785 min(adapter->itr + (new_itr >> 2), new_itr) :
2787 adapter->itr = new_itr;
2788 ew32(ITR, 1000000000 / (new_itr * 256));
2794 #define E1000_TX_FLAGS_CSUM 0x00000001
2795 #define E1000_TX_FLAGS_VLAN 0x00000002
2796 #define E1000_TX_FLAGS_TSO 0x00000004
2797 #define E1000_TX_FLAGS_IPV4 0x00000008
2798 #define E1000_TX_FLAGS_VLAN_MASK 0xffff0000
2799 #define E1000_TX_FLAGS_VLAN_SHIFT 16
2801 static int e1000_tso(struct e1000_adapter *adapter,
2802 struct e1000_tx_ring *tx_ring, struct sk_buff *skb)
2804 struct e1000_context_desc *context_desc;
2805 struct e1000_buffer *buffer_info;
2808 u16 ipcse = 0, tucse, mss;
2809 u8 ipcss, ipcso, tucss, tucso, hdr_len;
2812 if (skb_is_gso(skb)) {
2813 if (skb_header_cloned(skb)) {
2814 err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC);
2819 hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
2820 mss = skb_shinfo(skb)->gso_size;
2821 if (skb->protocol == htons(ETH_P_IP)) {
2822 struct iphdr *iph = ip_hdr(skb);
2825 tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr,
2829 cmd_length = E1000_TXD_CMD_IP;
2830 ipcse = skb_transport_offset(skb) - 1;
2831 } else if (skb->protocol == htons(ETH_P_IPV6)) {
2832 ipv6_hdr(skb)->payload_len = 0;
2833 tcp_hdr(skb)->check =
2834 ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr,
2835 &ipv6_hdr(skb)->daddr,
2839 ipcss = skb_network_offset(skb);
2840 ipcso = (void *)&(ip_hdr(skb)->check) - (void *)skb->data;
2841 tucss = skb_transport_offset(skb);
2842 tucso = (void *)&(tcp_hdr(skb)->check) - (void *)skb->data;
2845 cmd_length |= (E1000_TXD_CMD_DEXT | E1000_TXD_CMD_TSE |
2846 E1000_TXD_CMD_TCP | (skb->len - (hdr_len)));
2848 i = tx_ring->next_to_use;
2849 context_desc = E1000_CONTEXT_DESC(*tx_ring, i);
2850 buffer_info = &tx_ring->buffer_info[i];
2852 context_desc->lower_setup.ip_fields.ipcss = ipcss;
2853 context_desc->lower_setup.ip_fields.ipcso = ipcso;
2854 context_desc->lower_setup.ip_fields.ipcse = cpu_to_le16(ipcse);
2855 context_desc->upper_setup.tcp_fields.tucss = tucss;
2856 context_desc->upper_setup.tcp_fields.tucso = tucso;
2857 context_desc->upper_setup.tcp_fields.tucse = cpu_to_le16(tucse);
2858 context_desc->tcp_seg_setup.fields.mss = cpu_to_le16(mss);
2859 context_desc->tcp_seg_setup.fields.hdr_len = hdr_len;
2860 context_desc->cmd_and_length = cpu_to_le32(cmd_length);
2862 buffer_info->time_stamp = jiffies;
2863 buffer_info->next_to_watch = i;
2865 if (++i == tx_ring->count) i = 0;
2866 tx_ring->next_to_use = i;
2873 static bool e1000_tx_csum(struct e1000_adapter *adapter,
2874 struct e1000_tx_ring *tx_ring, struct sk_buff *skb)
2876 struct e1000_context_desc *context_desc;
2877 struct e1000_buffer *buffer_info;
2880 u32 cmd_len = E1000_TXD_CMD_DEXT;
2882 if (skb->ip_summed != CHECKSUM_PARTIAL)
2885 switch (skb->protocol) {
2886 case __constant_htons(ETH_P_IP):
2887 if (ip_hdr(skb)->protocol == IPPROTO_TCP)
2888 cmd_len |= E1000_TXD_CMD_TCP;
2890 case __constant_htons(ETH_P_IPV6):
2891 /* XXX not handling all IPV6 headers */
2892 if (ipv6_hdr(skb)->nexthdr == IPPROTO_TCP)
2893 cmd_len |= E1000_TXD_CMD_TCP;
2896 if (unlikely(net_ratelimit()))
2897 DPRINTK(DRV, WARNING,
2898 "checksum_partial proto=%x!\n", skb->protocol);
2902 css = skb_transport_offset(skb);
2904 i = tx_ring->next_to_use;
2905 buffer_info = &tx_ring->buffer_info[i];
2906 context_desc = E1000_CONTEXT_DESC(*tx_ring, i);
2908 context_desc->lower_setup.ip_config = 0;
2909 context_desc->upper_setup.tcp_fields.tucss = css;
2910 context_desc->upper_setup.tcp_fields.tucso =
2911 css + skb->csum_offset;
2912 context_desc->upper_setup.tcp_fields.tucse = 0;
2913 context_desc->tcp_seg_setup.data = 0;
2914 context_desc->cmd_and_length = cpu_to_le32(cmd_len);
2916 buffer_info->time_stamp = jiffies;
2917 buffer_info->next_to_watch = i;
2919 if (unlikely(++i == tx_ring->count)) i = 0;
2920 tx_ring->next_to_use = i;
2925 #define E1000_MAX_TXD_PWR 12
2926 #define E1000_MAX_DATA_PER_TXD (1<<E1000_MAX_TXD_PWR)
2928 static int e1000_tx_map(struct e1000_adapter *adapter,
2929 struct e1000_tx_ring *tx_ring,
2930 struct sk_buff *skb, unsigned int first,
2931 unsigned int max_per_txd, unsigned int nr_frags,
2934 struct e1000_hw *hw = &adapter->hw;
2935 struct e1000_buffer *buffer_info;
2936 unsigned int len = skb->len;
2937 unsigned int offset = 0, size, count = 0, i;
2939 len -= skb->data_len;
2941 i = tx_ring->next_to_use;
2944 buffer_info = &tx_ring->buffer_info[i];
2945 size = min(len, max_per_txd);
2946 /* Workaround for Controller erratum --
2947 * descriptor for non-tso packet in a linear SKB that follows a
2948 * tso gets written back prematurely before the data is fully
2949 * DMA'd to the controller */
2950 if (!skb->data_len && tx_ring->last_tx_tso &&
2952 tx_ring->last_tx_tso = 0;
2956 /* Workaround for premature desc write-backs
2957 * in TSO mode. Append 4-byte sentinel desc */
2958 if (unlikely(mss && !nr_frags && size == len && size > 8))
2960 /* work-around for errata 10 and it applies
2961 * to all controllers in PCI-X mode
2962 * The fix is to make sure that the first descriptor of a
2963 * packet is smaller than 2048 - 16 - 16 (or 2016) bytes
2965 if (unlikely((hw->bus_type == e1000_bus_type_pcix) &&
2966 (size > 2015) && count == 0))
2969 /* Workaround for potential 82544 hang in PCI-X. Avoid
2970 * terminating buffers within evenly-aligned dwords. */
2971 if (unlikely(adapter->pcix_82544 &&
2972 !((unsigned long)(skb->data + offset + size - 1) & 4) &&
2976 buffer_info->length = size;
2978 pci_map_single(adapter->pdev,
2982 buffer_info->time_stamp = jiffies;
2983 buffer_info->next_to_watch = i;
2988 if (unlikely(++i == tx_ring->count)) i = 0;
2991 for (f = 0; f < nr_frags; f++) {
2992 struct skb_frag_struct *frag;
2994 frag = &skb_shinfo(skb)->frags[f];
2996 offset = frag->page_offset;
2999 buffer_info = &tx_ring->buffer_info[i];
3000 size = min(len, max_per_txd);
3001 /* Workaround for premature desc write-backs
3002 * in TSO mode. Append 4-byte sentinel desc */
3003 if (unlikely(mss && f == (nr_frags-1) && size == len && size > 8))
3005 /* Workaround for potential 82544 hang in PCI-X.
3006 * Avoid terminating buffers within evenly-aligned
3008 if (unlikely(adapter->pcix_82544 &&
3009 !((unsigned long)(frag->page+offset+size-1) & 4) &&
3013 buffer_info->length = size;
3015 pci_map_page(adapter->pdev,
3020 buffer_info->time_stamp = jiffies;
3021 buffer_info->next_to_watch = i;
3026 if (unlikely(++i == tx_ring->count)) i = 0;
3030 i = (i == 0) ? tx_ring->count - 1 : i - 1;
3031 tx_ring->buffer_info[i].skb = skb;
3032 tx_ring->buffer_info[first].next_to_watch = i;
3037 static void e1000_tx_queue(struct e1000_adapter *adapter,
3038 struct e1000_tx_ring *tx_ring, int tx_flags,
3041 struct e1000_hw *hw = &adapter->hw;
3042 struct e1000_tx_desc *tx_desc = NULL;
3043 struct e1000_buffer *buffer_info;
3044 u32 txd_upper = 0, txd_lower = E1000_TXD_CMD_IFCS;
3047 if (likely(tx_flags & E1000_TX_FLAGS_TSO)) {
3048 txd_lower |= E1000_TXD_CMD_DEXT | E1000_TXD_DTYP_D |
3050 txd_upper |= E1000_TXD_POPTS_TXSM << 8;
3052 if (likely(tx_flags & E1000_TX_FLAGS_IPV4))
3053 txd_upper |= E1000_TXD_POPTS_IXSM << 8;
3056 if (likely(tx_flags & E1000_TX_FLAGS_CSUM)) {
3057 txd_lower |= E1000_TXD_CMD_DEXT | E1000_TXD_DTYP_D;
3058 txd_upper |= E1000_TXD_POPTS_TXSM << 8;
3061 if (unlikely(tx_flags & E1000_TX_FLAGS_VLAN)) {
3062 txd_lower |= E1000_TXD_CMD_VLE;
3063 txd_upper |= (tx_flags & E1000_TX_FLAGS_VLAN_MASK);
3066 i = tx_ring->next_to_use;
3069 buffer_info = &tx_ring->buffer_info[i];
3070 tx_desc = E1000_TX_DESC(*tx_ring, i);
3071 tx_desc->buffer_addr = cpu_to_le64(buffer_info->dma);
3072 tx_desc->lower.data =
3073 cpu_to_le32(txd_lower | buffer_info->length);
3074 tx_desc->upper.data = cpu_to_le32(txd_upper);
3075 if (unlikely(++i == tx_ring->count)) i = 0;
3078 tx_desc->lower.data |= cpu_to_le32(adapter->txd_cmd);
3080 /* Force memory writes to complete before letting h/w
3081 * know there are new descriptors to fetch. (Only
3082 * applicable for weak-ordered memory model archs,
3083 * such as IA-64). */
3086 tx_ring->next_to_use = i;
3087 writel(i, hw->hw_addr + tx_ring->tdt);
3088 /* we need this if more than one processor can write to our tail
3089 * at a time, it syncronizes IO on IA64/Altix systems */
3094 * 82547 workaround to avoid controller hang in half-duplex environment.
3095 * The workaround is to avoid queuing a large packet that would span
3096 * the internal Tx FIFO ring boundary by notifying the stack to resend
3097 * the packet at a later time. This gives the Tx FIFO an opportunity to
3098 * flush all packets. When that occurs, we reset the Tx FIFO pointers
3099 * to the beginning of the Tx FIFO.
3102 #define E1000_FIFO_HDR 0x10
3103 #define E1000_82547_PAD_LEN 0x3E0
3105 static int e1000_82547_fifo_workaround(struct e1000_adapter *adapter,
3106 struct sk_buff *skb)
3108 u32 fifo_space = adapter->tx_fifo_size - adapter->tx_fifo_head;
3109 u32 skb_fifo_len = skb->len + E1000_FIFO_HDR;
3111 skb_fifo_len = ALIGN(skb_fifo_len, E1000_FIFO_HDR);
3113 if (adapter->link_duplex != HALF_DUPLEX)
3114 goto no_fifo_stall_required;
3116 if (atomic_read(&adapter->tx_fifo_stall))
3119 if (skb_fifo_len >= (E1000_82547_PAD_LEN + fifo_space)) {
3120 atomic_set(&adapter->tx_fifo_stall, 1);
3124 no_fifo_stall_required:
3125 adapter->tx_fifo_head += skb_fifo_len;
3126 if (adapter->tx_fifo_head >= adapter->tx_fifo_size)
3127 adapter->tx_fifo_head -= adapter->tx_fifo_size;
3131 #define MINIMUM_DHCP_PACKET_SIZE 282
3132 static int e1000_transfer_dhcp_info(struct e1000_adapter *adapter,
3133 struct sk_buff *skb)
3135 struct e1000_hw *hw = &adapter->hw;
3137 if (vlan_tx_tag_present(skb)) {
3138 if (!((vlan_tx_tag_get(skb) == hw->mng_cookie.vlan_id) &&
3139 ( hw->mng_cookie.status &
3140 E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT)) )
3143 if (skb->len > MINIMUM_DHCP_PACKET_SIZE) {
3144 struct ethhdr *eth = (struct ethhdr *)skb->data;
3145 if ((htons(ETH_P_IP) == eth->h_proto)) {
3146 const struct iphdr *ip =
3147 (struct iphdr *)((u8 *)skb->data+14);
3148 if (IPPROTO_UDP == ip->protocol) {
3149 struct udphdr *udp =
3150 (struct udphdr *)((u8 *)ip +
3152 if (ntohs(udp->dest) == 67) {
3153 offset = (u8 *)udp + 8 - skb->data;
3154 length = skb->len - offset;
3156 return e1000_mng_write_dhcp_info(hw,
3166 static int __e1000_maybe_stop_tx(struct net_device *netdev, int size)
3168 struct e1000_adapter *adapter = netdev_priv(netdev);
3169 struct e1000_tx_ring *tx_ring = adapter->tx_ring;
3171 netif_stop_queue(netdev);
3172 /* Herbert's original patch had:
3173 * smp_mb__after_netif_stop_queue();
3174 * but since that doesn't exist yet, just open code it. */
3177 /* We need to check again in a case another CPU has just
3178 * made room available. */
3179 if (likely(E1000_DESC_UNUSED(tx_ring) < size))
3183 netif_start_queue(netdev);
3184 ++adapter->restart_queue;
3188 static int e1000_maybe_stop_tx(struct net_device *netdev,
3189 struct e1000_tx_ring *tx_ring, int size)
3191 if (likely(E1000_DESC_UNUSED(tx_ring) >= size))
3193 return __e1000_maybe_stop_tx(netdev, size);
3196 #define TXD_USE_COUNT(S, X) (((S) >> (X)) + 1 )
3197 static int e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
3199 struct e1000_adapter *adapter = netdev_priv(netdev);
3200 struct e1000_hw *hw = &adapter->hw;
3201 struct e1000_tx_ring *tx_ring;
3202 unsigned int first, max_per_txd = E1000_MAX_DATA_PER_TXD;
3203 unsigned int max_txd_pwr = E1000_MAX_TXD_PWR;
3204 unsigned int tx_flags = 0;
3205 unsigned int len = skb->len - skb->data_len;
3206 unsigned long flags;
3207 unsigned int nr_frags;
3213 /* This goes back to the question of how to logically map a tx queue
3214 * to a flow. Right now, performance is impacted slightly negatively
3215 * if using multiple tx queues. If the stack breaks away from a
3216 * single qdisc implementation, we can look at this again. */
3217 tx_ring = adapter->tx_ring;
3219 if (unlikely(skb->len <= 0)) {
3220 dev_kfree_skb_any(skb);
3221 return NETDEV_TX_OK;
3224 /* 82571 and newer doesn't need the workaround that limited descriptor
3226 if (hw->mac_type >= e1000_82571)
3229 mss = skb_shinfo(skb)->gso_size;
3230 /* The controller does a simple calculation to
3231 * make sure there is enough room in the FIFO before
3232 * initiating the DMA for each buffer. The calc is:
3233 * 4 = ceil(buffer len/mss). To make sure we don't
3234 * overrun the FIFO, adjust the max buffer len if mss
3238 max_per_txd = min(mss << 2, max_per_txd);
3239 max_txd_pwr = fls(max_per_txd) - 1;
3241 /* TSO Workaround for 82571/2/3 Controllers -- if skb->data
3242 * points to just header, pull a few bytes of payload from
3243 * frags into skb->data */
3244 hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
3245 if (skb->data_len && hdr_len == len) {
3246 switch (hw->mac_type) {
3247 unsigned int pull_size;
3249 /* Make sure we have room to chop off 4 bytes,
3250 * and that the end alignment will work out to
3251 * this hardware's requirements
3252 * NOTE: this is a TSO only workaround
3253 * if end byte alignment not correct move us
3254 * into the next dword */
3255 if ((unsigned long)(skb_tail_pointer(skb) - 1) & 4)
3262 pull_size = min((unsigned int)4, skb->data_len);
3263 if (!__pskb_pull_tail(skb, pull_size)) {
3265 "__pskb_pull_tail failed.\n");
3266 dev_kfree_skb_any(skb);
3267 return NETDEV_TX_OK;
3269 len = skb->len - skb->data_len;
3278 /* reserve a descriptor for the offload context */
3279 if ((mss) || (skb->ip_summed == CHECKSUM_PARTIAL))
3283 /* Controller Erratum workaround */
3284 if (!skb->data_len && tx_ring->last_tx_tso && !skb_is_gso(skb))
3287 count += TXD_USE_COUNT(len, max_txd_pwr);
3289 if (adapter->pcix_82544)
3292 /* work-around for errata 10 and it applies to all controllers
3293 * in PCI-X mode, so add one more descriptor to the count
3295 if (unlikely((hw->bus_type == e1000_bus_type_pcix) &&
3299 nr_frags = skb_shinfo(skb)->nr_frags;
3300 for (f = 0; f < nr_frags; f++)
3301 count += TXD_USE_COUNT(skb_shinfo(skb)->frags[f].size,
3303 if (adapter->pcix_82544)
3307 if (hw->tx_pkt_filtering &&
3308 (hw->mac_type == e1000_82573))
3309 e1000_transfer_dhcp_info(adapter, skb);
3311 if (!spin_trylock_irqsave(&tx_ring->tx_lock, flags))
3312 /* Collision - tell upper layer to requeue */
3313 return NETDEV_TX_LOCKED;
3315 /* need: count + 2 desc gap to keep tail from touching
3316 * head, otherwise try next time */
3317 if (unlikely(e1000_maybe_stop_tx(netdev, tx_ring, count + 2))) {
3318 spin_unlock_irqrestore(&tx_ring->tx_lock, flags);
3319 return NETDEV_TX_BUSY;
3322 if (unlikely(hw->mac_type == e1000_82547)) {
3323 if (unlikely(e1000_82547_fifo_workaround(adapter, skb))) {
3324 netif_stop_queue(netdev);
3325 mod_timer(&adapter->tx_fifo_stall_timer, jiffies + 1);
3326 spin_unlock_irqrestore(&tx_ring->tx_lock, flags);
3327 return NETDEV_TX_BUSY;
3331 if (unlikely(adapter->vlgrp && vlan_tx_tag_present(skb))) {
3332 tx_flags |= E1000_TX_FLAGS_VLAN;
3333 tx_flags |= (vlan_tx_tag_get(skb) << E1000_TX_FLAGS_VLAN_SHIFT);
3336 first = tx_ring->next_to_use;
3338 tso = e1000_tso(adapter, tx_ring, skb);
3340 dev_kfree_skb_any(skb);
3341 spin_unlock_irqrestore(&tx_ring->tx_lock, flags);
3342 return NETDEV_TX_OK;
3346 tx_ring->last_tx_tso = 1;
3347 tx_flags |= E1000_TX_FLAGS_TSO;
3348 } else if (likely(e1000_tx_csum(adapter, tx_ring, skb)))
3349 tx_flags |= E1000_TX_FLAGS_CSUM;
3351 /* Old method was to assume IPv4 packet by default if TSO was enabled.
3352 * 82571 hardware supports TSO capabilities for IPv6 as well...
3353 * no longer assume, we must. */
3354 if (likely(skb->protocol == htons(ETH_P_IP)))
3355 tx_flags |= E1000_TX_FLAGS_IPV4;
3357 e1000_tx_queue(adapter, tx_ring, tx_flags,
3358 e1000_tx_map(adapter, tx_ring, skb, first,
3359 max_per_txd, nr_frags, mss));
3361 netdev->trans_start = jiffies;
3363 /* Make sure there is space in the ring for the next send. */
3364 e1000_maybe_stop_tx(netdev, tx_ring, MAX_SKB_FRAGS + 2);
3366 spin_unlock_irqrestore(&tx_ring->tx_lock, flags);
3367 return NETDEV_TX_OK;
3371 * e1000_tx_timeout - Respond to a Tx Hang
3372 * @netdev: network interface device structure
3375 static void e1000_tx_timeout(struct net_device *netdev)
3377 struct e1000_adapter *adapter = netdev_priv(netdev);
3379 /* Do the reset outside of interrupt context */
3380 adapter->tx_timeout_count++;
3381 schedule_work(&adapter->reset_task);
3384 static void e1000_reset_task(struct work_struct *work)
3386 struct e1000_adapter *adapter =
3387 container_of(work, struct e1000_adapter, reset_task);
3389 e1000_reinit_locked(adapter);
3393 * e1000_get_stats - Get System Network Statistics
3394 * @netdev: network interface device structure
3396 * Returns the address of the device statistics structure.
3397 * The statistics are actually updated from the timer callback.
3400 static struct net_device_stats *e1000_get_stats(struct net_device *netdev)
3402 struct e1000_adapter *adapter = netdev_priv(netdev);
3404 /* only return the current stats */
3405 return &adapter->net_stats;
3409 * e1000_change_mtu - Change the Maximum Transfer Unit
3410 * @netdev: network interface device structure
3411 * @new_mtu: new value for maximum frame size
3413 * Returns 0 on success, negative on failure
3416 static int e1000_change_mtu(struct net_device *netdev, int new_mtu)
3418 struct e1000_adapter *adapter = netdev_priv(netdev);
3419 struct e1000_hw *hw = &adapter->hw;
3420 int max_frame = new_mtu + ENET_HEADER_SIZE + ETHERNET_FCS_SIZE;
3421 u16 eeprom_data = 0;
3423 if ((max_frame < MINIMUM_ETHERNET_FRAME_SIZE) ||
3424 (max_frame > MAX_JUMBO_FRAME_SIZE)) {
3425 DPRINTK(PROBE, ERR, "Invalid MTU setting\n");
3429 /* Adapter-specific max frame size limits. */
3430 switch (hw->mac_type) {
3431 case e1000_undefined ... e1000_82542_rev2_1:
3433 if (max_frame > MAXIMUM_ETHERNET_FRAME_SIZE) {
3434 DPRINTK(PROBE, ERR, "Jumbo Frames not supported.\n");
3439 /* Jumbo Frames not supported if:
3440 * - this is not an 82573L device
3441 * - ASPM is enabled in any way (0x1A bits 3:2) */
3442 e1000_read_eeprom(hw, EEPROM_INIT_3GIO_3, 1,
3444 if ((hw->device_id != E1000_DEV_ID_82573L) ||
3445 (eeprom_data & EEPROM_WORD1A_ASPM_MASK)) {
3446 if (max_frame > MAXIMUM_ETHERNET_FRAME_SIZE) {
3448 "Jumbo Frames not supported.\n");
3453 /* ERT will be enabled later to enable wire speed receives */
3455 /* fall through to get support */
3458 case e1000_80003es2lan:
3459 #define MAX_STD_JUMBO_FRAME_SIZE 9234
3460 if (max_frame > MAX_STD_JUMBO_FRAME_SIZE) {
3461 DPRINTK(PROBE, ERR, "MTU > 9216 not supported.\n");
3466 /* Capable of supporting up to MAX_JUMBO_FRAME_SIZE limit. */
3470 /* NOTE: netdev_alloc_skb reserves 16 bytes, and typically NET_IP_ALIGN
3471 * means we reserve 2 more, this pushes us to allocate from the next
3473 * i.e. RXBUFFER_2048 --> size-4096 slab */
3475 if (max_frame <= E1000_RXBUFFER_256)
3476 adapter->rx_buffer_len = E1000_RXBUFFER_256;
3477 else if (max_frame <= E1000_RXBUFFER_512)
3478 adapter->rx_buffer_len = E1000_RXBUFFER_512;
3479 else if (max_frame <= E1000_RXBUFFER_1024)
3480 adapter->rx_buffer_len = E1000_RXBUFFER_1024;
3481 else if (max_frame <= E1000_RXBUFFER_2048)
3482 adapter->rx_buffer_len = E1000_RXBUFFER_2048;
3483 else if (max_frame <= E1000_RXBUFFER_4096)
3484 adapter->rx_buffer_len = E1000_RXBUFFER_4096;
3485 else if (max_frame <= E1000_RXBUFFER_8192)
3486 adapter->rx_buffer_len = E1000_RXBUFFER_8192;
3487 else if (max_frame <= E1000_RXBUFFER_16384)
3488 adapter->rx_buffer_len = E1000_RXBUFFER_16384;
3490 /* adjust allocation if LPE protects us, and we aren't using SBP */
3491 if (!hw->tbi_compatibility_on &&
3492 ((max_frame == MAXIMUM_ETHERNET_FRAME_SIZE) ||
3493 (max_frame == MAXIMUM_ETHERNET_VLAN_SIZE)))
3494 adapter->rx_buffer_len = MAXIMUM_ETHERNET_VLAN_SIZE;
3496 netdev->mtu = new_mtu;
3497 hw->max_frame_size = max_frame;
3499 if (netif_running(netdev))
3500 e1000_reinit_locked(adapter);
3506 * e1000_update_stats - Update the board statistics counters
3507 * @adapter: board private structure
3510 void e1000_update_stats(struct e1000_adapter *adapter)
3512 struct e1000_hw *hw = &adapter->hw;
3513 struct pci_dev *pdev = adapter->pdev;
3514 unsigned long flags;
3517 #define PHY_IDLE_ERROR_COUNT_MASK 0x00FF
3520 * Prevent stats update while adapter is being reset, or if the pci
3521 * connection is down.
3523 if (adapter->link_speed == 0)
3525 if (pci_channel_offline(pdev))
3528 spin_lock_irqsave(&adapter->stats_lock, flags);
3530 /* these counters are modified from e1000_tbi_adjust_stats,
3531 * called from the interrupt context, so they must only
3532 * be written while holding adapter->stats_lock
3535 adapter->stats.crcerrs += er32(CRCERRS);
3536 adapter->stats.gprc += er32(GPRC);
3537 adapter->stats.gorcl += er32(GORCL);
3538 adapter->stats.gorch += er32(GORCH);
3539 adapter->stats.bprc += er32(BPRC);
3540 adapter->stats.mprc += er32(MPRC);
3541 adapter->stats.roc += er32(ROC);
3543 if (hw->mac_type != e1000_ich8lan) {
3544 adapter->stats.prc64 += er32(PRC64);
3545 adapter->stats.prc127 += er32(PRC127);
3546 adapter->stats.prc255 += er32(PRC255);
3547 adapter->stats.prc511 += er32(PRC511);
3548 adapter->stats.prc1023 += er32(PRC1023);
3549 adapter->stats.prc1522 += er32(PRC1522);
3552 adapter->stats.symerrs += er32(SYMERRS);
3553 adapter->stats.mpc += er32(MPC);
3554 adapter->stats.scc += er32(SCC);
3555 adapter->stats.ecol += er32(ECOL);
3556 adapter->stats.mcc += er32(MCC);
3557 adapter->stats.latecol += er32(LATECOL);
3558 adapter->stats.dc += er32(DC);
3559 adapter->stats.sec += er32(SEC);
3560 adapter->stats.rlec += er32(RLEC);
3561 adapter->stats.xonrxc += er32(XONRXC);
3562 adapter->stats.xontxc += er32(XONTXC);
3563 adapter->stats.xoffrxc += er32(XOFFRXC);
3564 adapter->stats.xofftxc += er32(XOFFTXC);
3565 adapter->stats.fcruc += er32(FCRUC);
3566 adapter->stats.gptc += er32(GPTC);
3567 adapter->stats.gotcl += er32(GOTCL);
3568 adapter->stats.gotch += er32(GOTCH);
3569 adapter->stats.rnbc += er32(RNBC);
3570 adapter->stats.ruc += er32(RUC);
3571 adapter->stats.rfc += er32(RFC);
3572 adapter->stats.rjc += er32(RJC);
3573 adapter->stats.torl += er32(TORL);
3574 adapter->stats.torh += er32(TORH);
3575 adapter->stats.totl += er32(TOTL);
3576 adapter->stats.toth += er32(TOTH);
3577 adapter->stats.tpr += er32(TPR);
3579 if (hw->mac_type != e1000_ich8lan) {
3580 adapter->stats.ptc64 += er32(PTC64);
3581 adapter->stats.ptc127 += er32(PTC127);
3582 adapter->stats.ptc255 += er32(PTC255);
3583 adapter->stats.ptc511 += er32(PTC511);
3584 adapter->stats.ptc1023 += er32(PTC1023);
3585 adapter->stats.ptc1522 += er32(PTC1522);
3588 adapter->stats.mptc += er32(MPTC);
3589 adapter->stats.bptc += er32(BPTC);
3591 /* used for adaptive IFS */
3593 hw->tx_packet_delta = er32(TPT);
3594 adapter->stats.tpt += hw->tx_packet_delta;
3595 hw->collision_delta = er32(COLC);
3596 adapter->stats.colc += hw->collision_delta;
3598 if (hw->mac_type >= e1000_82543) {
3599 adapter->stats.algnerrc += er32(ALGNERRC);
3600 adapter->stats.rxerrc += er32(RXERRC);
3601 adapter->stats.tncrs += er32(TNCRS);
3602 adapter->stats.cexterr += er32(CEXTERR);
3603 adapter->stats.tsctc += er32(TSCTC);
3604 adapter->stats.tsctfc += er32(TSCTFC);
3606 if (hw->mac_type > e1000_82547_rev_2) {
3607 adapter->stats.iac += er32(IAC);
3608 adapter->stats.icrxoc += er32(ICRXOC);
3610 if (hw->mac_type != e1000_ich8lan) {
3611 adapter->stats.icrxptc += er32(ICRXPTC);
3612 adapter->stats.icrxatc += er32(ICRXATC);
3613 adapter->stats.ictxptc += er32(ICTXPTC);
3614 adapter->stats.ictxatc += er32(ICTXATC);
3615 adapter->stats.ictxqec += er32(ICTXQEC);
3616 adapter->stats.ictxqmtc += er32(ICTXQMTC);
3617 adapter->stats.icrxdmtc += er32(ICRXDMTC);
3621 /* Fill out the OS statistics structure */
3622 adapter->net_stats.multicast = adapter->stats.mprc;
3623 adapter->net_stats.collisions = adapter->stats.colc;
3627 /* RLEC on some newer hardware can be incorrect so build
3628 * our own version based on RUC and ROC */
3629 adapter->net_stats.rx_errors = adapter->stats.rxerrc +
3630 adapter->stats.crcerrs + adapter->stats.algnerrc +
3631 adapter->stats.ruc + adapter->stats.roc +
3632 adapter->stats.cexterr;
3633 adapter->stats.rlerrc = adapter->stats.ruc + adapter->stats.roc;
3634 adapter->net_stats.rx_length_errors = adapter->stats.rlerrc;
3635 adapter->net_stats.rx_crc_errors = adapter->stats.crcerrs;
3636 adapter->net_stats.rx_frame_errors = adapter->stats.algnerrc;
3637 adapter->net_stats.rx_missed_errors = adapter->stats.mpc;
3640 adapter->stats.txerrc = adapter->stats.ecol + adapter->stats.latecol;
3641 adapter->net_stats.tx_errors = adapter->stats.txerrc;
3642 adapter->net_stats.tx_aborted_errors = adapter->stats.ecol;
3643 adapter->net_stats.tx_window_errors = adapter->stats.latecol;
3644 adapter->net_stats.tx_carrier_errors = adapter->stats.tncrs;
3645 if (hw->bad_tx_carr_stats_fd &&
3646 adapter->link_duplex == FULL_DUPLEX) {
3647 adapter->net_stats.tx_carrier_errors = 0;
3648 adapter->stats.tncrs = 0;
3651 /* Tx Dropped needs to be maintained elsewhere */
3654 if (hw->media_type == e1000_media_type_copper) {
3655 if ((adapter->link_speed == SPEED_1000) &&
3656 (!e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_tmp))) {
3657 phy_tmp &= PHY_IDLE_ERROR_COUNT_MASK;
3658 adapter->phy_stats.idle_errors += phy_tmp;
3661 if ((hw->mac_type <= e1000_82546) &&
3662 (hw->phy_type == e1000_phy_m88) &&
3663 !e1000_read_phy_reg(hw, M88E1000_RX_ERR_CNTR, &phy_tmp))
3664 adapter->phy_stats.receive_errors += phy_tmp;
3667 /* Management Stats */
3668 if (hw->has_smbus) {
3669 adapter->stats.mgptc += er32(MGTPTC);
3670 adapter->stats.mgprc += er32(MGTPRC);
3671 adapter->stats.mgpdc += er32(MGTPDC);
3674 spin_unlock_irqrestore(&adapter->stats_lock, flags);
3678 * e1000_intr_msi - Interrupt Handler
3679 * @irq: interrupt number
3680 * @data: pointer to a network interface device structure
3683 static irqreturn_t e1000_intr_msi(int irq, void *data)
3685 struct net_device *netdev = data;
3686 struct e1000_adapter *adapter = netdev_priv(netdev);
3687 struct e1000_hw *hw = &adapter->hw;
3688 u32 icr = er32(ICR);
3690 /* in NAPI mode read ICR disables interrupts using IAM */
3692 if (icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC)) {
3693 hw->get_link_status = 1;
3694 /* 80003ES2LAN workaround-- For packet buffer work-around on
3695 * link down event; disable receives here in the ISR and reset
3696 * adapter in watchdog */
3697 if (netif_carrier_ok(netdev) &&
3698 (hw->mac_type == e1000_80003es2lan)) {
3699 /* disable receives */
3700 u32 rctl = er32(RCTL);
3701 ew32(RCTL, rctl & ~E1000_RCTL_EN);
3703 /* guard against interrupt when we're going down */
3704 if (!test_bit(__E1000_DOWN, &adapter->flags))
3705 mod_timer(&adapter->watchdog_timer, jiffies + 1);
3708 if (likely(netif_rx_schedule_prep(netdev, &adapter->napi))) {
3709 adapter->total_tx_bytes = 0;
3710 adapter->total_tx_packets = 0;
3711 adapter->total_rx_bytes = 0;
3712 adapter->total_rx_packets = 0;
3713 __netif_rx_schedule(netdev, &adapter->napi);
3715 e1000_irq_enable(adapter);
3721 * e1000_intr - Interrupt Handler
3722 * @irq: interrupt number
3723 * @data: pointer to a network interface device structure
3726 static irqreturn_t e1000_intr(int irq, void *data)
3728 struct net_device *netdev = data;
3729 struct e1000_adapter *adapter = netdev_priv(netdev);
3730 struct e1000_hw *hw = &adapter->hw;
3731 u32 rctl, icr = er32(ICR);
3734 return IRQ_NONE; /* Not our interrupt */
3736 /* IMS will not auto-mask if INT_ASSERTED is not set, and if it is
3737 * not set, then the adapter didn't send an interrupt */
3738 if (unlikely(hw->mac_type >= e1000_82571 &&
3739 !(icr & E1000_ICR_INT_ASSERTED)))
3742 /* Interrupt Auto-Mask...upon reading ICR, interrupts are masked. No
3743 * need for the IMC write */
3745 if (unlikely(icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC))) {
3746 hw->get_link_status = 1;
3747 /* 80003ES2LAN workaround--
3748 * For packet buffer work-around on link down event;
3749 * disable receives here in the ISR and
3750 * reset adapter in watchdog
3752 if (netif_carrier_ok(netdev) &&
3753 (hw->mac_type == e1000_80003es2lan)) {
3754 /* disable receives */
3756 ew32(RCTL, rctl & ~E1000_RCTL_EN);
3758 /* guard against interrupt when we're going down */
3759 if (!test_bit(__E1000_DOWN, &adapter->flags))
3760 mod_timer(&adapter->watchdog_timer, jiffies + 1);
3763 if (unlikely(hw->mac_type < e1000_82571)) {
3764 /* disable interrupts, without the synchronize_irq bit */
3766 E1000_WRITE_FLUSH();
3768 if (likely(netif_rx_schedule_prep(netdev, &adapter->napi))) {
3769 adapter->total_tx_bytes = 0;
3770 adapter->total_tx_packets = 0;
3771 adapter->total_rx_bytes = 0;
3772 adapter->total_rx_packets = 0;
3773 __netif_rx_schedule(netdev, &adapter->napi);
3775 /* this really should not happen! if it does it is basically a
3776 * bug, but not a hard error, so enable ints and continue */
3777 e1000_irq_enable(adapter);
3783 * e1000_clean - NAPI Rx polling callback
3784 * @adapter: board private structure
3786 static int e1000_clean(struct napi_struct *napi, int budget)
3788 struct e1000_adapter *adapter = container_of(napi, struct e1000_adapter, napi);
3789 struct net_device *poll_dev = adapter->netdev;
3790 int tx_cleaned = 0, work_done = 0;
3792 /* Must NOT use netdev_priv macro here. */
3793 adapter = poll_dev->priv;
3795 /* e1000_clean is called per-cpu. This lock protects
3796 * tx_ring[0] from being cleaned by multiple cpus
3797 * simultaneously. A failure obtaining the lock means
3798 * tx_ring[0] is currently being cleaned anyway. */
3799 if (spin_trylock(&adapter->tx_queue_lock)) {
3800 tx_cleaned = e1000_clean_tx_irq(adapter,
3801 &adapter->tx_ring[0]);
3802 spin_unlock(&adapter->tx_queue_lock);
3805 adapter->clean_rx(adapter, &adapter->rx_ring[0],
3806 &work_done, budget);
3811 /* If budget not fully consumed, exit the polling mode */
3812 if (work_done < budget) {
3813 if (likely(adapter->itr_setting & 3))
3814 e1000_set_itr(adapter);
3815 netif_rx_complete(poll_dev, napi);
3816 e1000_irq_enable(adapter);
3823 * e1000_clean_tx_irq - Reclaim resources after transmit completes
3824 * @adapter: board private structure
3826 static bool e1000_clean_tx_irq(struct e1000_adapter *adapter,
3827 struct e1000_tx_ring *tx_ring)
3829 struct e1000_hw *hw = &adapter->hw;
3830 struct net_device *netdev = adapter->netdev;
3831 struct e1000_tx_desc *tx_desc, *eop_desc;
3832 struct e1000_buffer *buffer_info;
3833 unsigned int i, eop;
3834 unsigned int count = 0;
3835 bool cleaned = false;
3836 unsigned int total_tx_bytes=0, total_tx_packets=0;
3838 i = tx_ring->next_to_clean;
3839 eop = tx_ring->buffer_info[i].next_to_watch;
3840 eop_desc = E1000_TX_DESC(*tx_ring, eop);
3842 while (eop_desc->upper.data & cpu_to_le32(E1000_TXD_STAT_DD)) {
3843 for (cleaned = false; !cleaned; ) {
3844 tx_desc = E1000_TX_DESC(*tx_ring, i);
3845 buffer_info = &tx_ring->buffer_info[i];
3846 cleaned = (i == eop);
3849 struct sk_buff *skb = buffer_info->skb;
3850 unsigned int segs, bytecount;
3851 segs = skb_shinfo(skb)->gso_segs ?: 1;
3852 /* multiply data chunks by size of headers */
3853 bytecount = ((segs - 1) * skb_headlen(skb)) +
3855 total_tx_packets += segs;
3856 total_tx_bytes += bytecount;
3858 e1000_unmap_and_free_tx_resource(adapter, buffer_info);
3859 tx_desc->upper.data = 0;
3861 if (unlikely(++i == tx_ring->count)) i = 0;
3864 eop = tx_ring->buffer_info[i].next_to_watch;
3865 eop_desc = E1000_TX_DESC(*tx_ring, eop);
3866 #define E1000_TX_WEIGHT 64
3867 /* weight of a sort for tx, to avoid endless transmit cleanup */
3868 if (count++ == E1000_TX_WEIGHT)
3872 tx_ring->next_to_clean = i;
3874 #define TX_WAKE_THRESHOLD 32
3875 if (unlikely(cleaned && netif_carrier_ok(netdev) &&
3876 E1000_DESC_UNUSED(tx_ring) >= TX_WAKE_THRESHOLD)) {
3877 /* Make sure that anybody stopping the queue after this
3878 * sees the new next_to_clean.
3881 if (netif_queue_stopped(netdev)) {
3882 netif_wake_queue(netdev);
3883 ++adapter->restart_queue;
3887 if (adapter->detect_tx_hung) {
3888 /* Detect a transmit hang in hardware, this serializes the
3889 * check with the clearing of time_stamp and movement of i */
3890 adapter->detect_tx_hung = false;
3891 if (tx_ring->buffer_info[eop].dma &&
3892 time_after(jiffies, tx_ring->buffer_info[eop].time_stamp +
3893 (adapter->tx_timeout_factor * HZ))
3894 && !(er32(STATUS) & E1000_STATUS_TXOFF)) {
3896 /* detected Tx unit hang */
3897 DPRINTK(DRV, ERR, "Detected Tx Unit Hang\n"
3901 " next_to_use <%x>\n"
3902 " next_to_clean <%x>\n"
3903 "buffer_info[next_to_clean]\n"
3904 " time_stamp <%lx>\n"
3905 " next_to_watch <%x>\n"
3907 " next_to_watch.status <%x>\n",
3908 (unsigned long)((tx_ring - adapter->tx_ring) /
3909 sizeof(struct e1000_tx_ring)),
3910 readl(hw->hw_addr + tx_ring->tdh),
3911 readl(hw->hw_addr + tx_ring->tdt),
3912 tx_ring->next_to_use,
3913 tx_ring->next_to_clean,
3914 tx_ring->buffer_info[eop].time_stamp,
3917 eop_desc->upper.fields.status);
3918 netif_stop_queue(netdev);
3921 adapter->total_tx_bytes += total_tx_bytes;
3922 adapter->total_tx_packets += total_tx_packets;
3923 adapter->net_stats.tx_bytes += total_tx_bytes;
3924 adapter->net_stats.tx_packets += total_tx_packets;
3929 * e1000_rx_checksum - Receive Checksum Offload for 82543
3930 * @adapter: board private structure
3931 * @status_err: receive descriptor status and error fields
3932 * @csum: receive descriptor csum field
3933 * @sk_buff: socket buffer with received data
3936 static void e1000_rx_checksum(struct e1000_adapter *adapter, u32 status_err,
3937 u32 csum, struct sk_buff *skb)
3939 struct e1000_hw *hw = &adapter->hw;
3940 u16 status = (u16)status_err;
3941 u8 errors = (u8)(status_err >> 24);
3942 skb->ip_summed = CHECKSUM_NONE;
3944 /* 82543 or newer only */
3945 if (unlikely(hw->mac_type < e1000_82543)) return;
3946 /* Ignore Checksum bit is set */
3947 if (unlikely(status & E1000_RXD_STAT_IXSM)) return;
3948 /* TCP/UDP checksum error bit is set */
3949 if (unlikely(errors & E1000_RXD_ERR_TCPE)) {
3950 /* let the stack verify checksum errors */
3951 adapter->hw_csum_err++;
3954 /* TCP/UDP Checksum has not been calculated */
3955 if (hw->mac_type <= e1000_82547_rev_2) {
3956 if (!(status & E1000_RXD_STAT_TCPCS))
3959 if (!(status & (E1000_RXD_STAT_TCPCS | E1000_RXD_STAT_UDPCS)))
3962 /* It must be a TCP or UDP packet with a valid checksum */
3963 if (likely(status & E1000_RXD_STAT_TCPCS)) {
3964 /* TCP checksum is good */
3965 skb->ip_summed = CHECKSUM_UNNECESSARY;
3966 } else if (hw->mac_type > e1000_82547_rev_2) {
3967 /* IP fragment with UDP payload */
3968 /* Hardware complements the payload checksum, so we undo it
3969 * and then put the value in host order for further stack use.
3971 __sum16 sum = (__force __sum16)htons(csum);
3972 skb->csum = csum_unfold(~sum);
3973 skb->ip_summed = CHECKSUM_COMPLETE;
3975 adapter->hw_csum_good++;
3979 * e1000_clean_rx_irq - Send received data up the network stack; legacy
3980 * @adapter: board private structure
3982 static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
3983 struct e1000_rx_ring *rx_ring,
3984 int *work_done, int work_to_do)
3986 struct e1000_hw *hw = &adapter->hw;
3987 struct net_device *netdev = adapter->netdev;
3988 struct pci_dev *pdev = adapter->pdev;
3989 struct e1000_rx_desc *rx_desc, *next_rxd;
3990 struct e1000_buffer *buffer_info, *next_buffer;
3991 unsigned long flags;
3995 int cleaned_count = 0;
3996 bool cleaned = false;
3997 unsigned int total_rx_bytes=0, total_rx_packets=0;
3999 i = rx_ring->next_to_clean;
4000 rx_desc = E1000_RX_DESC(*rx_ring, i);
4001 buffer_info = &rx_ring->buffer_info[i];
4003 while (rx_desc->status & E1000_RXD_STAT_DD) {
4004 struct sk_buff *skb;
4007 if (*work_done >= work_to_do)
4011 status = rx_desc->status;
4012 skb = buffer_info->skb;
4013 buffer_info->skb = NULL;
4015 prefetch(skb->data - NET_IP_ALIGN);
4017 if (++i == rx_ring->count) i = 0;
4018 next_rxd = E1000_RX_DESC(*rx_ring, i);
4021 next_buffer = &rx_ring->buffer_info[i];
4025 pci_unmap_single(pdev,
4027 buffer_info->length,
4028 PCI_DMA_FROMDEVICE);
4030 length = le16_to_cpu(rx_desc->length);
4032 if (unlikely(!(status & E1000_RXD_STAT_EOP))) {
4033 /* All receives must fit into a single buffer */
4034 E1000_DBG("%s: Receive packet consumed multiple"
4035 " buffers\n", netdev->name);
4037 buffer_info->skb = skb;
4041 if (unlikely(rx_desc->errors & E1000_RXD_ERR_FRAME_ERR_MASK)) {
4042 last_byte = *(skb->data + length - 1);
4043 if (TBI_ACCEPT(hw, status, rx_desc->errors, length,
4045 spin_lock_irqsave(&adapter->stats_lock, flags);
4046 e1000_tbi_adjust_stats(hw, &adapter->stats,
4048 spin_unlock_irqrestore(&adapter->stats_lock,
4053 buffer_info->skb = skb;
4058 /* adjust length to remove Ethernet CRC, this must be
4059 * done after the TBI_ACCEPT workaround above */
4062 /* probably a little skewed due to removing CRC */
4063 total_rx_bytes += length;
4066 /* code added for copybreak, this should improve
4067 * performance for small packets with large amounts
4068 * of reassembly being done in the stack */
4069 if (length < copybreak) {
4070 struct sk_buff *new_skb =
4071 netdev_alloc_skb(netdev, length + NET_IP_ALIGN);
4073 skb_reserve(new_skb, NET_IP_ALIGN);
4074 skb_copy_to_linear_data_offset(new_skb,
4080 /* save the skb in buffer_info as good */
4081 buffer_info->skb = skb;
4084 /* else just continue with the old one */
4086 /* end copybreak code */
4087 skb_put(skb, length);
4089 /* Receive Checksum Offload */
4090 e1000_rx_checksum(adapter,
4092 ((u32)(rx_desc->errors) << 24),
4093 le16_to_cpu(rx_desc->csum), skb);
4095 skb->protocol = eth_type_trans(skb, netdev);
4097 if (unlikely(adapter->vlgrp &&
4098 (status & E1000_RXD_STAT_VP))) {
4099 vlan_hwaccel_receive_skb(skb, adapter->vlgrp,
4100 le16_to_cpu(rx_desc->special));
4102 netif_receive_skb(skb);
4105 netdev->last_rx = jiffies;
4108 rx_desc->status = 0;
4110 /* return some buffers to hardware, one at a time is too slow */
4111 if (unlikely(cleaned_count >= E1000_RX_BUFFER_WRITE)) {
4112 adapter->alloc_rx_buf(adapter, rx_ring, cleaned_count);
4116 /* use prefetched values */
4118 buffer_info = next_buffer;
4120 rx_ring->next_to_clean = i;
4122 cleaned_count = E1000_DESC_UNUSED(rx_ring);
4124 adapter->alloc_rx_buf(adapter, rx_ring, cleaned_count);
4126 adapter->total_rx_packets += total_rx_packets;
4127 adapter->total_rx_bytes += total_rx_bytes;
4128 adapter->net_stats.rx_bytes += total_rx_bytes;
4129 adapter->net_stats.rx_packets += total_rx_packets;
4134 * e1000_alloc_rx_buffers - Replace used receive buffers; legacy & extended
4135 * @adapter: address of board private structure
4138 static void e1000_alloc_rx_buffers(struct e1000_adapter *adapter,
4139 struct e1000_rx_ring *rx_ring,
4142 struct e1000_hw *hw = &adapter->hw;
4143 struct net_device *netdev = adapter->netdev;
4144 struct pci_dev *pdev = adapter->pdev;
4145 struct e1000_rx_desc *rx_desc;
4146 struct e1000_buffer *buffer_info;
4147 struct sk_buff *skb;
4149 unsigned int bufsz = adapter->rx_buffer_len + NET_IP_ALIGN;
4151 i = rx_ring->next_to_use;
4152 buffer_info = &rx_ring->buffer_info[i];
4154 while (cleaned_count--) {
4155 skb = buffer_info->skb;
4161 skb = netdev_alloc_skb(netdev, bufsz);
4162 if (unlikely(!skb)) {
4163 /* Better luck next round */
4164 adapter->alloc_rx_buff_failed++;
4168 /* Fix for errata 23, can't cross 64kB boundary */
4169 if (!e1000_check_64k_bound(adapter, skb->data, bufsz)) {
4170 struct sk_buff *oldskb = skb;
4171 DPRINTK(RX_ERR, ERR, "skb align check failed: %u bytes "
4172 "at %p\n", bufsz, skb->data);
4173 /* Try again, without freeing the previous */
4174 skb = netdev_alloc_skb(netdev, bufsz);
4175 /* Failed allocation, critical failure */
4177 dev_kfree_skb(oldskb);
4181 if (!e1000_check_64k_bound(adapter, skb->data, bufsz)) {
4184 dev_kfree_skb(oldskb);
4185 break; /* while !buffer_info->skb */
4188 /* Use new allocation */
4189 dev_kfree_skb(oldskb);
4191 /* Make buffer alignment 2 beyond a 16 byte boundary
4192 * this will result in a 16 byte aligned IP header after
4193 * the 14 byte MAC header is removed
4195 skb_reserve(skb, NET_IP_ALIGN);
4197 buffer_info->skb = skb;
4198 buffer_info->length = adapter->rx_buffer_len;
4200 buffer_info->dma = pci_map_single(pdev,
4202 adapter->rx_buffer_len,
4203 PCI_DMA_FROMDEVICE);
4205 /* Fix for errata 23, can't cross 64kB boundary */
4206 if (!e1000_check_64k_bound(adapter,
4207 (void *)(unsigned long)buffer_info->dma,
4208 adapter->rx_buffer_len)) {
4209 DPRINTK(RX_ERR, ERR,
4210 "dma align check failed: %u bytes at %p\n",
4211 adapter->rx_buffer_len,
4212 (void *)(unsigned long)buffer_info->dma);
4214 buffer_info->skb = NULL;
4216 pci_unmap_single(pdev, buffer_info->dma,
4217 adapter->rx_buffer_len,
4218 PCI_DMA_FROMDEVICE);
4220 break; /* while !buffer_info->skb */
4222 rx_desc = E1000_RX_DESC(*rx_ring, i);
4223 rx_desc->buffer_addr = cpu_to_le64(buffer_info->dma);
4225 if (unlikely(++i == rx_ring->count))
4227 buffer_info = &rx_ring->buffer_info[i];
4230 if (likely(rx_ring->next_to_use != i)) {
4231 rx_ring->next_to_use = i;
4232 if (unlikely(i-- == 0))
4233 i = (rx_ring->count - 1);
4235 /* Force memory writes to complete before letting h/w
4236 * know there are new descriptors to fetch. (Only
4237 * applicable for weak-ordered memory model archs,
4238 * such as IA-64). */
4240 writel(i, hw->hw_addr + rx_ring->rdt);
4245 * e1000_smartspeed - Workaround for SmartSpeed on 82541 and 82547 controllers.
4249 static void e1000_smartspeed(struct e1000_adapter *adapter)
4251 struct e1000_hw *hw = &adapter->hw;
4255 if ((hw->phy_type != e1000_phy_igp) || !hw->autoneg ||
4256 !(hw->autoneg_advertised & ADVERTISE_1000_FULL))
4259 if (adapter->smartspeed == 0) {
4260 /* If Master/Slave config fault is asserted twice,
4261 * we assume back-to-back */
4262 e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_status);
4263 if (!(phy_status & SR_1000T_MS_CONFIG_FAULT)) return;
4264 e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_status);
4265 if (!(phy_status & SR_1000T_MS_CONFIG_FAULT)) return;
4266 e1000_read_phy_reg(hw, PHY_1000T_CTRL, &phy_ctrl);
4267 if (phy_ctrl & CR_1000T_MS_ENABLE) {
4268 phy_ctrl &= ~CR_1000T_MS_ENABLE;
4269 e1000_write_phy_reg(hw, PHY_1000T_CTRL,
4271 adapter->smartspeed++;
4272 if (!e1000_phy_setup_autoneg(hw) &&
4273 !e1000_read_phy_reg(hw, PHY_CTRL,
4275 phy_ctrl |= (MII_CR_AUTO_NEG_EN |
4276 MII_CR_RESTART_AUTO_NEG);
4277 e1000_write_phy_reg(hw, PHY_CTRL,
4282 } else if (adapter->smartspeed == E1000_SMARTSPEED_DOWNSHIFT) {
4283 /* If still no link, perhaps using 2/3 pair cable */
4284 e1000_read_phy_reg(hw, PHY_1000T_CTRL, &phy_ctrl);
4285 phy_ctrl |= CR_1000T_MS_ENABLE;
4286 e1000_write_phy_reg(hw, PHY_1000T_CTRL, phy_ctrl);
4287 if (!e1000_phy_setup_autoneg(hw) &&
4288 !e1000_read_phy_reg(hw, PHY_CTRL, &phy_ctrl)) {
4289 phy_ctrl |= (MII_CR_AUTO_NEG_EN |
4290 MII_CR_RESTART_AUTO_NEG);
4291 e1000_write_phy_reg(hw, PHY_CTRL, phy_ctrl);
4294 /* Restart process after E1000_SMARTSPEED_MAX iterations */
4295 if (adapter->smartspeed++ == E1000_SMARTSPEED_MAX)
4296 adapter->smartspeed = 0;
4306 static int e1000_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
4312 return e1000_mii_ioctl(netdev, ifr, cmd);
4325 static int e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr,
4328 struct e1000_adapter *adapter = netdev_priv(netdev);
4329 struct e1000_hw *hw = &adapter->hw;
4330 struct mii_ioctl_data *data = if_mii(ifr);
4334 unsigned long flags;
4336 if (hw->media_type != e1000_media_type_copper)
4341 data->phy_id = hw->phy_addr;
4344 if (!capable(CAP_NET_ADMIN))
4346 spin_lock_irqsave(&adapter->stats_lock, flags);
4347 if (e1000_read_phy_reg(hw, data->reg_num & 0x1F,
4349 spin_unlock_irqrestore(&adapter->stats_lock, flags);
4352 spin_unlock_irqrestore(&adapter->stats_lock, flags);
4355 if (!capable(CAP_NET_ADMIN))
4357 if (data->reg_num & ~(0x1F))
4359 mii_reg = data->val_in;
4360 spin_lock_irqsave(&adapter->stats_lock, flags);
4361 if (e1000_write_phy_reg(hw, data->reg_num,
4363 spin_unlock_irqrestore(&adapter->stats_lock, flags);
4366 spin_unlock_irqrestore(&adapter->stats_lock, flags);
4367 if (hw->media_type == e1000_media_type_copper) {
4368 switch (data->reg_num) {
4370 if (mii_reg & MII_CR_POWER_DOWN)
4372 if (mii_reg & MII_CR_AUTO_NEG_EN) {
4374 hw->autoneg_advertised = 0x2F;
4377 spddplx = SPEED_1000;
4378 else if (mii_reg & 0x2000)
4379 spddplx = SPEED_100;
4382 spddplx += (mii_reg & 0x100)
4385 retval = e1000_set_spd_dplx(adapter,
4390 if (netif_running(adapter->netdev))
4391 e1000_reinit_locked(adapter);
4393 e1000_reset(adapter);
4395 case M88E1000_PHY_SPEC_CTRL:
4396 case M88E1000_EXT_PHY_SPEC_CTRL:
4397 if (e1000_phy_reset(hw))
4402 switch (data->reg_num) {
4404 if (mii_reg & MII_CR_POWER_DOWN)
4406 if (netif_running(adapter->netdev))
4407 e1000_reinit_locked(adapter);
4409 e1000_reset(adapter);
4417 return E1000_SUCCESS;
4420 void e1000_pci_set_mwi(struct e1000_hw *hw)
4422 struct e1000_adapter *adapter = hw->back;
4423 int ret_val = pci_set_mwi(adapter->pdev);
4426 DPRINTK(PROBE, ERR, "Error in setting MWI\n");
4429 void e1000_pci_clear_mwi(struct e1000_hw *hw)
4431 struct e1000_adapter *adapter = hw->back;
4433 pci_clear_mwi(adapter->pdev);
4436 int e1000_pcix_get_mmrbc(struct e1000_hw *hw)
4438 struct e1000_adapter *adapter = hw->back;
4439 return pcix_get_mmrbc(adapter->pdev);
4442 void e1000_pcix_set_mmrbc(struct e1000_hw *hw, int mmrbc)
4444 struct e1000_adapter *adapter = hw->back;
4445 pcix_set_mmrbc(adapter->pdev, mmrbc);
4448 s32 e1000_read_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value)
4450 struct e1000_adapter *adapter = hw->back;
4453 cap_offset = pci_find_capability(adapter->pdev, PCI_CAP_ID_EXP);
4455 return -E1000_ERR_CONFIG;
4457 pci_read_config_word(adapter->pdev, cap_offset + reg, value);
4459 return E1000_SUCCESS;
4462 void e1000_io_write(struct e1000_hw *hw, unsigned long port, u32 value)
4467 static void e1000_vlan_rx_register(struct net_device *netdev,
4468 struct vlan_group *grp)
4470 struct e1000_adapter *adapter = netdev_priv(netdev);
4471 struct e1000_hw *hw = &adapter->hw;
4474 if (!test_bit(__E1000_DOWN, &adapter->flags))
4475 e1000_irq_disable(adapter);
4476 adapter->vlgrp = grp;
4479 /* enable VLAN tag insert/strip */
4481 ctrl |= E1000_CTRL_VME;
4484 if (adapter->hw.mac_type != e1000_ich8lan) {
4485 /* enable VLAN receive filtering */
4487 rctl &= ~E1000_RCTL_CFIEN;
4489 e1000_update_mng_vlan(adapter);
4492 /* disable VLAN tag insert/strip */
4494 ctrl &= ~E1000_CTRL_VME;
4497 if (adapter->hw.mac_type != e1000_ich8lan) {
4498 if (adapter->mng_vlan_id !=
4499 (u16)E1000_MNG_VLAN_NONE) {
4500 e1000_vlan_rx_kill_vid(netdev,
4501 adapter->mng_vlan_id);
4502 adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
4507 if (!test_bit(__E1000_DOWN, &adapter->flags))
4508 e1000_irq_enable(adapter);
4511 static void e1000_vlan_rx_add_vid(struct net_device *netdev, u16 vid)
4513 struct e1000_adapter *adapter = netdev_priv(netdev);
4514 struct e1000_hw *hw = &adapter->hw;
4517 if ((hw->mng_cookie.status &
4518 E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) &&
4519 (vid == adapter->mng_vlan_id))
4521 /* add VID to filter table */
4522 index = (vid >> 5) & 0x7F;
4523 vfta = E1000_READ_REG_ARRAY(hw, VFTA, index);
4524 vfta |= (1 << (vid & 0x1F));
4525 e1000_write_vfta(hw, index, vfta);
4528 static void e1000_vlan_rx_kill_vid(struct net_device *netdev, u16 vid)
4530 struct e1000_adapter *adapter = netdev_priv(netdev);
4531 struct e1000_hw *hw = &adapter->hw;
4534 if (!test_bit(__E1000_DOWN, &adapter->flags))
4535 e1000_irq_disable(adapter);
4536 vlan_group_set_device(adapter->vlgrp, vid, NULL);
4537 if (!test_bit(__E1000_DOWN, &adapter->flags))
4538 e1000_irq_enable(adapter);
4540 if ((hw->mng_cookie.status &
4541 E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) &&
4542 (vid == adapter->mng_vlan_id)) {
4543 /* release control to f/w */
4544 e1000_release_hw_control(adapter);
4548 /* remove VID from filter table */
4549 index = (vid >> 5) & 0x7F;
4550 vfta = E1000_READ_REG_ARRAY(hw, VFTA, index);
4551 vfta &= ~(1 << (vid & 0x1F));
4552 e1000_write_vfta(hw, index, vfta);
4555 static void e1000_restore_vlan(struct e1000_adapter *adapter)
4557 e1000_vlan_rx_register(adapter->netdev, adapter->vlgrp);
4559 if (adapter->vlgrp) {
4561 for (vid = 0; vid < VLAN_GROUP_ARRAY_LEN; vid++) {
4562 if (!vlan_group_get_device(adapter->vlgrp, vid))
4564 e1000_vlan_rx_add_vid(adapter->netdev, vid);
4569 int e1000_set_spd_dplx(struct e1000_adapter *adapter, u16 spddplx)
4571 struct e1000_hw *hw = &adapter->hw;
4575 /* Fiber NICs only allow 1000 gbps Full duplex */
4576 if ((hw->media_type == e1000_media_type_fiber) &&
4577 spddplx != (SPEED_1000 + DUPLEX_FULL)) {
4578 DPRINTK(PROBE, ERR, "Unsupported Speed/Duplex configuration\n");
4583 case SPEED_10 + DUPLEX_HALF:
4584 hw->forced_speed_duplex = e1000_10_half;
4586 case SPEED_10 + DUPLEX_FULL:
4587 hw->forced_speed_duplex = e1000_10_full;
4589 case SPEED_100 + DUPLEX_HALF:
4590 hw->forced_speed_duplex = e1000_100_half;
4592 case SPEED_100 + DUPLEX_FULL:
4593 hw->forced_speed_duplex = e1000_100_full;
4595 case SPEED_1000 + DUPLEX_FULL:
4597 hw->autoneg_advertised = ADVERTISE_1000_FULL;
4599 case SPEED_1000 + DUPLEX_HALF: /* not supported */
4601 DPRINTK(PROBE, ERR, "Unsupported Speed/Duplex configuration\n");
4607 static int e1000_suspend(struct pci_dev *pdev, pm_message_t state)
4609 struct net_device *netdev = pci_get_drvdata(pdev);
4610 struct e1000_adapter *adapter = netdev_priv(netdev);
4611 struct e1000_hw *hw = &adapter->hw;
4612 u32 ctrl, ctrl_ext, rctl, status;
4613 u32 wufc = adapter->wol;
4618 netif_device_detach(netdev);
4620 if (netif_running(netdev)) {
4621 WARN_ON(test_bit(__E1000_RESETTING, &adapter->flags));
4622 e1000_down(adapter);
4626 retval = pci_save_state(pdev);
4631 status = er32(STATUS);
4632 if (status & E1000_STATUS_LU)
4633 wufc &= ~E1000_WUFC_LNKC;
4636 e1000_setup_rctl(adapter);
4637 e1000_set_rx_mode(netdev);
4639 /* turn on all-multi mode if wake on multicast is enabled */
4640 if (wufc & E1000_WUFC_MC) {
4642 rctl |= E1000_RCTL_MPE;
4646 if (hw->mac_type >= e1000_82540) {
4648 /* advertise wake from D3Cold */
4649 #define E1000_CTRL_ADVD3WUC 0x00100000
4650 /* phy power management enable */
4651 #define E1000_CTRL_EN_PHY_PWR_MGMT 0x00200000
4652 ctrl |= E1000_CTRL_ADVD3WUC |
4653 E1000_CTRL_EN_PHY_PWR_MGMT;
4657 if (hw->media_type == e1000_media_type_fiber ||
4658 hw->media_type == e1000_media_type_internal_serdes) {
4659 /* keep the laser running in D3 */
4660 ctrl_ext = er32(CTRL_EXT);
4661 ctrl_ext |= E1000_CTRL_EXT_SDP7_DATA;
4662 ew32(CTRL_EXT, ctrl_ext);
4665 /* Allow time for pending master requests to run */
4666 e1000_disable_pciex_master(hw);
4668 ew32(WUC, E1000_WUC_PME_EN);
4670 pci_enable_wake(pdev, PCI_D3hot, 1);
4671 pci_enable_wake(pdev, PCI_D3cold, 1);
4675 pci_enable_wake(pdev, PCI_D3hot, 0);
4676 pci_enable_wake(pdev, PCI_D3cold, 0);
4679 e1000_release_manageability(adapter);
4681 /* make sure adapter isn't asleep if manageability is enabled */
4682 if (adapter->en_mng_pt) {
4683 pci_enable_wake(pdev, PCI_D3hot, 1);
4684 pci_enable_wake(pdev, PCI_D3cold, 1);
4687 if (hw->phy_type == e1000_phy_igp_3)
4688 e1000_phy_powerdown_workaround(hw);
4690 if (netif_running(netdev))
4691 e1000_free_irq(adapter);
4693 /* Release control of h/w to f/w. If f/w is AMT enabled, this
4694 * would have already happened in close and is redundant. */
4695 e1000_release_hw_control(adapter);
4697 pci_disable_device(pdev);
4699 pci_set_power_state(pdev, pci_choose_state(pdev, state));
4705 static int e1000_resume(struct pci_dev *pdev)
4707 struct net_device *netdev = pci_get_drvdata(pdev);
4708 struct e1000_adapter *adapter = netdev_priv(netdev);
4709 struct e1000_hw *hw = &adapter->hw;
4712 pci_set_power_state(pdev, PCI_D0);
4713 pci_restore_state(pdev);
4715 if (adapter->need_ioport)
4716 err = pci_enable_device(pdev);
4718 err = pci_enable_device_mem(pdev);
4720 printk(KERN_ERR "e1000: Cannot enable PCI device from suspend\n");
4723 pci_set_master(pdev);
4725 pci_enable_wake(pdev, PCI_D3hot, 0);
4726 pci_enable_wake(pdev, PCI_D3cold, 0);
4728 if (netif_running(netdev)) {
4729 err = e1000_request_irq(adapter);
4734 e1000_power_up_phy(adapter);
4735 e1000_reset(adapter);
4738 e1000_init_manageability(adapter);
4740 if (netif_running(netdev))
4743 netif_device_attach(netdev);
4745 /* If the controller is 82573 and f/w is AMT, do not set
4746 * DRV_LOAD until the interface is up. For all other cases,
4747 * let the f/w know that the h/w is now under the control
4749 if (hw->mac_type != e1000_82573 ||
4750 !e1000_check_mng_mode(hw))
4751 e1000_get_hw_control(adapter);
4757 static void e1000_shutdown(struct pci_dev *pdev)
4759 e1000_suspend(pdev, PMSG_SUSPEND);
4762 #ifdef CONFIG_NET_POLL_CONTROLLER
4764 * Polling 'interrupt' - used by things like netconsole to send skbs
4765 * without having to re-enable interrupts. It's not called while
4766 * the interrupt routine is executing.
4768 static void e1000_netpoll(struct net_device *netdev)
4770 struct e1000_adapter *adapter = netdev_priv(netdev);
4772 disable_irq(adapter->pdev->irq);
4773 e1000_intr(adapter->pdev->irq, netdev);
4774 enable_irq(adapter->pdev->irq);
4779 * e1000_io_error_detected - called when PCI error is detected
4780 * @pdev: Pointer to PCI device
4781 * @state: The current pci conneection state
4783 * This function is called after a PCI bus error affecting
4784 * this device has been detected.
4786 static pci_ers_result_t e1000_io_error_detected(struct pci_dev *pdev,
4787 pci_channel_state_t state)
4789 struct net_device *netdev = pci_get_drvdata(pdev);
4790 struct e1000_adapter *adapter = netdev->priv;
4792 netif_device_detach(netdev);
4794 if (netif_running(netdev))
4795 e1000_down(adapter);
4796 pci_disable_device(pdev);
4798 /* Request a slot slot reset. */
4799 return PCI_ERS_RESULT_NEED_RESET;
4803 * e1000_io_slot_reset - called after the pci bus has been reset.
4804 * @pdev: Pointer to PCI device
4806 * Restart the card from scratch, as if from a cold-boot. Implementation
4807 * resembles the first-half of the e1000_resume routine.
4809 static pci_ers_result_t e1000_io_slot_reset(struct pci_dev *pdev)
4811 struct net_device *netdev = pci_get_drvdata(pdev);
4812 struct e1000_adapter *adapter = netdev->priv;
4813 struct e1000_hw *hw = &adapter->hw;
4816 if (adapter->need_ioport)
4817 err = pci_enable_device(pdev);
4819 err = pci_enable_device_mem(pdev);
4821 printk(KERN_ERR "e1000: Cannot re-enable PCI device after reset.\n");
4822 return PCI_ERS_RESULT_DISCONNECT;
4824 pci_set_master(pdev);
4826 pci_enable_wake(pdev, PCI_D3hot, 0);
4827 pci_enable_wake(pdev, PCI_D3cold, 0);
4829 e1000_reset(adapter);
4832 return PCI_ERS_RESULT_RECOVERED;
4836 * e1000_io_resume - called when traffic can start flowing again.
4837 * @pdev: Pointer to PCI device
4839 * This callback is called when the error recovery driver tells us that
4840 * its OK to resume normal operation. Implementation resembles the
4841 * second-half of the e1000_resume routine.
4843 static void e1000_io_resume(struct pci_dev *pdev)
4845 struct net_device *netdev = pci_get_drvdata(pdev);
4846 struct e1000_adapter *adapter = netdev->priv;
4847 struct e1000_hw *hw = &adapter->hw;
4849 e1000_init_manageability(adapter);
4851 if (netif_running(netdev)) {
4852 if (e1000_up(adapter)) {
4853 printk("e1000: can't bring device back up after reset\n");
4858 netif_device_attach(netdev);
4860 /* If the controller is 82573 and f/w is AMT, do not set
4861 * DRV_LOAD until the interface is up. For all other cases,
4862 * let the f/w know that the h/w is now under the control
4864 if (hw->mac_type != e1000_82573 ||
4865 !e1000_check_mng_mode(hw))
4866 e1000_get_hw_control(adapter);