2 * drivers/mtd/nand/omap-nand-flash.c
4 * Copyright (c) 2004 Texas Instruments, Jian Zhang <jzhang@ti.com>
5 * Copyright (c) 2004 David Brownell
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License version 2 as
9 * published by the Free Software Foundation.
12 #include <linux/init.h>
13 #include <linux/ioport.h>
14 #include <linux/delay.h>
15 #include <linux/kernel.h>
16 #include <linux/module.h>
17 #include <linux/platform_device.h>
18 #include <linux/types.h>
19 #include <linux/mtd/mtd.h>
20 #include <linux/mtd/nand.h>
21 #include <linux/mtd/partitions.h>
24 #include <mach/hardware.h>
25 #include <asm/mach-types.h>
26 #include <asm/mach/flash.h>
30 #include <mach/hardware.h>
31 #include <mach/nand.h>
33 #define DRIVER_NAME "omapnand"
35 #ifdef CONFIG_MTD_PARTITIONS
36 static const char *part_probes[] = { "cmdlinepart", NULL };
39 struct omap_nand_info {
40 struct omap_nand_platform_data *pdata;
41 struct mtd_partition *parts;
43 struct nand_chip nand;
47 * hardware specific access to control-lines
48 * NOTE: boards may use different bits for these!!
51 * NAND_NCE: bit 0 - don't care
52 * NAND_CLE: bit 1 -> bit 1 (0x0002)
53 * NAND_ALE: bit 2 -> bit 2 (0x0004)
56 static void omap_nand_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
58 struct nand_chip *chip = mtd->priv;
61 if (cmd == NAND_CMD_NONE)
64 mask = (ctrl & NAND_CLE) ? 0x02 : 0;
67 writeb(cmd, (unsigned long)chip->IO_ADDR_W | mask);
70 static int omap_nand_dev_ready(struct mtd_info *mtd)
72 struct omap_nand_info *info = container_of(mtd, struct omap_nand_info, mtd);
74 return info->pdata->dev_ready(info->pdata);
77 static int __devinit omap_nand_probe(struct platform_device *pdev)
79 struct omap_nand_info *info;
80 struct omap_nand_platform_data *pdata = pdev->dev.platform_data;
81 struct resource *res = pdev->resource;
82 unsigned long size = res->end - res->start + 1;
85 info = kzalloc(sizeof(struct omap_nand_info), GFP_KERNEL);
89 if (!request_mem_region(res->start, size, pdev->dev.driver->name)) {
94 info->nand.IO_ADDR_R = ioremap(res->start, size);
95 if (!info->nand.IO_ADDR_R) {
97 goto out_release_mem_region;
99 info->nand.IO_ADDR_W = info->nand.IO_ADDR_R;
100 info->nand.cmd_ctrl = omap_nand_hwcontrol;
101 info->nand.ecc.mode = NAND_ECC_SOFT;
102 info->nand.options = pdata->options;
103 if (pdata->dev_ready)
104 info->nand.dev_ready = omap_nand_dev_ready;
106 info->nand.chip_delay = 20;
108 info->mtd.name = pdev->dev.bus_id;
109 info->mtd.priv = &info->nand;
113 /* DIP switches on H2 and some other boards change between 8 and 16 bit
114 * bus widths for flash. Try the other width if the first try fails.
116 if (nand_scan(&info->mtd, 1)) {
117 info->nand.options ^= NAND_BUSWIDTH_16;
118 if (nand_scan(&info->mtd, 1)) {
123 info->mtd.owner = THIS_MODULE;
125 #ifdef CONFIG_MTD_PARTITIONS
126 err = parse_mtd_partitions(&info->mtd, part_probes, &info->parts, 0);
128 add_mtd_partitions(&info->mtd, info->parts, err);
129 else if (err < 0 && pdata->parts)
130 add_mtd_partitions(&info->mtd, pdata->parts, pdata->nr_parts);
133 add_mtd_device(&info->mtd);
135 platform_set_drvdata(pdev, info);
140 iounmap(info->nand.IO_ADDR_R);
141 out_release_mem_region:
142 release_mem_region(res->start, size);
149 static int omap_nand_remove(struct platform_device *pdev)
151 struct omap_nand_info *info = platform_get_drvdata(pdev);
153 platform_set_drvdata(pdev, NULL);
154 /* Release NAND device, its internal structures and partitions */
155 nand_release(&info->mtd);
156 iounmap(info->nand.IO_ADDR_R);
161 static struct platform_driver omap_nand_driver = {
162 .probe = omap_nand_probe,
163 .remove = omap_nand_remove,
168 MODULE_ALIAS(DRIVER_NAME);
170 static int __init omap_nand_init(void)
172 return platform_driver_register(&omap_nand_driver);
175 static void __exit omap_nand_exit(void)
177 platform_driver_unregister(&omap_nand_driver);
180 module_init(omap_nand_init);
181 module_exit(omap_nand_exit);
183 MODULE_LICENSE("GPL");
184 MODULE_AUTHOR("Jian Zhang <jzhang@ti.com> (and others)");
185 MODULE_DESCRIPTION("Glue layer for NAND flash on TI OMAP boards");