drivers/mtd/nand/atmel_nand.c

   1 /*
   2  *  Copyright (C) 2003 Rick Bronson
   3  *
   4  *  Derived from drivers/mtd/nand/autcpu12.c
   5  *       Copyright (c) 2001 Thomas Gleixner (gleixner@autronix.de)
   6  *
   7  *  Derived from drivers/mtd/spia.c
   8  *       Copyright (C) 2000 Steven J. Hill (sjhill@cotw.com)
   9  *
  10  *
  11  *  Add Hardware ECC support for AT91SAM9260 / AT91SAM9263
  12  *     Richard Genoud (richard.genoud@gmail.com), Adeneo Copyright (C) 2007
  13  *
  14  *     Derived from Das U-Boot source code
  15  *              (u-boot-1.1.5/board/atmel/at91sam9263ek/nand.c)
  16  *     (C) Copyright 2006 ATMEL Rousset, Lacressonniere Nicolas
  17  *
  18  *
  19  * This program is free software; you can redistribute it and/or modify
  20  * it under the terms of the GNU General Public License version 2 as
  21  * published by the Free Software Foundation.
  22  *
  23  */
  24
  25 #include <linux/slab.h>
  26 #include <linux/module.h>
  27 #include <linux/platform_device.h>
  28 #include <linux/mtd/mtd.h>
  29 #include <linux/mtd/nand.h>
  30 #include <linux/mtd/partitions.h>
  31
  32 #include <linux/gpio.h>
  33 #include <linux/io.h>
  34
  35 #include <mach/board.h>
  36 #include <mach/cpu.h>
  37
  38 #ifdef CONFIG_MTD_NAND_ATMEL_ECC_HW
  39 #define hard_ecc        1
  40 #else
  41 #define hard_ecc        0
  42 #endif
  43
  44 #ifdef CONFIG_MTD_NAND_ATMEL_ECC_NONE
  45 #define no_ecc          1
  46 #else
  47 #define no_ecc          0
  48 #endif
  49
  50 /* Register access macros */
  51 #define ecc_readl(add, reg)                             \
  52         __raw_readl(add + ATMEL_ECC_##reg)
  53 #define ecc_writel(add, reg, value)                     \
  54         __raw_writel((value), add + ATMEL_ECC_##reg)
  55
  56 #include "atmel_nand_ecc.h"     /* Hardware ECC registers */
  57
  58 /* oob layout for large page size
  59  * bad block info is on bytes 0 and 1
  60  * the bytes have to be consecutives to avoid
  61  * several NAND_CMD_RNDOUT during read
  62  */
  63 static struct nand_ecclayout atmel_oobinfo_large = {
  64         .eccbytes = 4,
  65         .eccpos = {60, 61, 62, 63},
  66         .oobfree = {
  67                 {2, 58}
  68         },
  69 };
  70
  71 /* oob layout for small page size
  72  * bad block info is on bytes 4 and 5
  73  * the bytes have to be consecutives to avoid
  74  * several NAND_CMD_RNDOUT during read
  75  */
  76 static struct nand_ecclayout atmel_oobinfo_small = {
  77         .eccbytes = 4,
  78         .eccpos = {0, 1, 2, 3},
  79         .oobfree = {
  80                 {6, 10}
  81         },
  82 };
  83
  84 struct atmel_nand_host {
  85         struct nand_chip        nand_chip;
  86         struct mtd_info         mtd;
  87         void __iomem            *io_base;
  88         struct atmel_nand_data  *board;
  89         struct device           *dev;
  90         void __iomem            *ecc;
  91 };
  92
  93 /*
  94  * Enable NAND.
  95  */
  96 static void atmel_nand_enable(struct atmel_nand_host *host)
  97 {
  98         if (host->board->enable_pin)
  99                 gpio_set_value(host->board->enable_pin, 0);
 100 }
 101
 102 /*
 103  * Disable NAND.
 104  */
 105 static void atmel_nand_disable(struct atmel_nand_host *host)
 106 {
 107         if (host->board->enable_pin)
 108                 gpio_set_value(host->board->enable_pin, 1);
 109 }
 110
 111 /*
 112  * Hardware specific access to control-lines
 113  */
 114 static void atmel_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
 115 {
 116         struct nand_chip *nand_chip = mtd->priv;
 117         struct atmel_nand_host *host = nand_chip->priv;
 118
 119         if (ctrl & NAND_CTRL_CHANGE) {
 120                 if (ctrl & NAND_NCE)
 121                         atmel_nand_enable(host);
 122                 else
 123                         atmel_nand_disable(host);
 124         }
 125         if (cmd == NAND_CMD_NONE)
 126                 return;
 127
 128         if (ctrl & NAND_CLE)
 129                 writeb(cmd, host->io_base + (1 << host->board->cle));
 130         else
 131                 writeb(cmd, host->io_base + (1 << host->board->ale));
 132 }
 133
 134 /*
 135  * Read the Device Ready pin.
 136  */
 137 static int atmel_nand_device_ready(struct mtd_info *mtd)
 138 {
 139         struct nand_chip *nand_chip = mtd->priv;
 140         struct atmel_nand_host *host = nand_chip->priv;
 141
 142         return gpio_get_value(host->board->rdy_pin);
 143 }
 144
 145 /*
 146  * Minimal-overhead PIO for data access.
 147  */
 148 static void atmel_read_buf(struct mtd_info *mtd, u8 *buf, int len)
 149 {
 150         struct nand_chip        *nand_chip = mtd->priv;
 151
 152         __raw_readsb(nand_chip->IO_ADDR_R, buf, len);
 153 }
 154
 155 static void atmel_read_buf16(struct mtd_info *mtd, u8 *buf, int len)
 156 {
 157         struct nand_chip        *nand_chip = mtd->priv;
 158
 159         __raw_readsw(nand_chip->IO_ADDR_R, buf, len / 2);
 160 }
 161
 162 static void atmel_write_buf(struct mtd_info *mtd, const u8 *buf, int len)
 163 {
 164         struct nand_chip        *nand_chip = mtd->priv;
 165
 166         __raw_writesb(nand_chip->IO_ADDR_W, buf, len);
 167 }
 168
 169 static void atmel_write_buf16(struct mtd_info *mtd, const u8 *buf, int len)
 170 {
 171         struct nand_chip        *nand_chip = mtd->priv;
 172
 173         __raw_writesw(nand_chip->IO_ADDR_W, buf, len / 2);
 174 }
 175
 176 /*
 177  * write oob for small pages
 178  */
 179 static int atmel_nand_write_oob_512(struct mtd_info *mtd,
 180                 struct nand_chip *chip, int page)
 181 {
 182         int chunk = chip->ecc.bytes + chip->ecc.prepad + chip->ecc.postpad;
 183         int eccsize = chip->ecc.size, length = mtd->oobsize;
 184         int len, pos, status = 0;
 185         const uint8_t *bufpoi = chip->oob_poi;
 186
 187         pos = eccsize + chunk;
 188
 189         chip->cmdfunc(mtd, NAND_CMD_SEQIN, pos, page);
 190         len = min_t(int, length, chunk);
 191         chip->write_buf(mtd, bufpoi, len);
 192         bufpoi += len;
 193         length -= len;
 194         if (length > 0)
 195                 chip->write_buf(mtd, bufpoi, length);
 196
 197         chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
 198         status = chip->waitfunc(mtd, chip);
 199
 200         return status & NAND_STATUS_FAIL ? -EIO : 0;
 201
 202 }
 203
 204 /*
 205  * read oob for small pages
 206  */
 207 static int atmel_nand_read_oob_512(struct mtd_info *mtd,
 208                 struct nand_chip *chip, int page, int sndcmd)
 209 {
 210         if (sndcmd) {
 211                 chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page);
 212                 sndcmd = 0;
 213         }
 214         chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
 215         return sndcmd;
 216 }
 217
 218 /*
 219  * Calculate HW ECC
 220  *
 221  * function called after a write
 222  *
 223  * mtd:        MTD block structure
 224  * dat:        raw data (unused)
 225  * ecc_code:   buffer for ECC
 226  */
 227 static int atmel_nand_calculate(struct mtd_info *mtd,
 228                 const u_char *dat, unsigned char *ecc_code)
 229 {
 230         struct nand_chip *nand_chip = mtd->priv;
 231         struct atmel_nand_host *host = nand_chip->priv;
 232         uint32_t *eccpos = nand_chip->ecc.layout->eccpos;
 233         unsigned int ecc_value;
 234
 235         /* get the first 2 ECC bytes */
 236         ecc_value = ecc_readl(host->ecc, PR);
 237
 238         ecc_code[eccpos[0]] = ecc_value & 0xFF;
 239         ecc_code[eccpos[1]] = (ecc_value >> 8) & 0xFF;
 240
 241         /* get the last 2 ECC bytes */
 242         ecc_value = ecc_readl(host->ecc, NPR) & ATMEL_ECC_NPARITY;
 243
 244         ecc_code[eccpos[2]] = ecc_value & 0xFF;
 245         ecc_code[eccpos[3]] = (ecc_value >> 8) & 0xFF;
 246
 247         return 0;
 248 }
 249
 250 /*
 251  * HW ECC read page function
 252  *
 253  * mtd:        mtd info structure
 254  * chip:       nand chip info structure
 255  * buf:        buffer to store read data
 256  */
 257 static int atmel_nand_read_page(struct mtd_info *mtd,
 258                 struct nand_chip *chip, uint8_t *buf)
 259 {
 260         int eccsize = chip->ecc.size;
 261         int eccbytes = chip->ecc.bytes;
 262         uint32_t *eccpos = chip->ecc.layout->eccpos;
 263         uint8_t *p = buf;
 264         uint8_t *oob = chip->oob_poi;
 265         uint8_t *ecc_pos;
 266         int stat;
 267
 268         /*
 269          * Errata: ALE is incorrectly wired up to the ECC controller
 270          * on the AP7000, so it will include the address cycles in the
 271          * ECC calculation.
 272          *
 273          * Workaround: Reset the parity registers before reading the
 274          * actual data.
 275          */
 276         if (cpu_is_at32ap7000()) {
 277                 struct atmel_nand_host *host = chip->priv;
 278                 ecc_writel(host->ecc, CR, ATMEL_ECC_RST);
 279         }
 280
 281         /* read the page */
 282         chip->read_buf(mtd, p, eccsize);
 283
 284         /* move to ECC position if needed */
 285         if (eccpos[0] != 0) {
 286                 /* This only works on large pages
 287                  * because the ECC controller waits for
 288                  * NAND_CMD_RNDOUTSTART after the
 289                  * NAND_CMD_RNDOUT.
 290                  * anyway, for small pages, the eccpos[0] == 0
 291                  */
 292                 chip->cmdfunc(mtd, NAND_CMD_RNDOUT,
 293                                 mtd->writesize + eccpos[0], -1);
 294         }
 295
 296         /* the ECC controller needs to read the ECC just after the data */
 297         ecc_pos = oob + eccpos[0];
 298         chip->read_buf(mtd, ecc_pos, eccbytes);
 299
 300         /* check if there's an error */
 301         stat = chip->ecc.correct(mtd, p, oob, NULL);
 302
 303         if (stat < 0)
 304                 mtd->ecc_stats.failed++;
 305         else
 306                 mtd->ecc_stats.corrected += stat;
 307
 308         /* get back to oob start (end of page) */
 309         chip->cmdfunc(mtd, NAND_CMD_RNDOUT, mtd->writesize, -1);
 310
 311         /* read the oob */
 312         chip->read_buf(mtd, oob, mtd->oobsize);
 313
 314         return 0;
 315 }
 316
 317 /*
 318  * HW ECC Correction
 319  *
 320  * function called after a read
 321  *
 322  * mtd:        MTD block structure
 323  * dat:        raw data read from the chip
 324  * read_ecc:   ECC from the chip (unused)
 325  * isnull:     unused
 326  *
 327  * Detect and correct a 1 bit error for a page
 328  */
 329 static int atmel_nand_correct(struct mtd_info *mtd, u_char *dat,
 330                 u_char *read_ecc, u_char *isnull)
 331 {
 332         struct nand_chip *nand_chip = mtd->priv;
 333         struct atmel_nand_host *host = nand_chip->priv;
 334         unsigned int ecc_status;
 335         unsigned int ecc_word, ecc_bit;
 336
 337         /* get the status from the Status Register */
 338         ecc_status = ecc_readl(host->ecc, SR);
 339
 340         /* if there's no error */
 341         if (likely(!(ecc_status & ATMEL_ECC_RECERR)))
 342                 return 0;
 343
 344         /* get error bit offset (4 bits) */
 345         ecc_bit = ecc_readl(host->ecc, PR) & ATMEL_ECC_BITADDR;
 346         /* get word address (12 bits) */
 347         ecc_word = ecc_readl(host->ecc, PR) & ATMEL_ECC_WORDADDR;
 348         ecc_word >>= 4;
 349
 350         /* if there are multiple errors */
 351         if (ecc_status & ATMEL_ECC_MULERR) {
 352                 /* check if it is a freshly erased block
 353                  * (filled with 0xff) */
 354                 if ((ecc_bit == ATMEL_ECC_BITADDR)
 355                                 && (ecc_word == (ATMEL_ECC_WORDADDR >> 4))) {
 356                         /* the block has just been erased, return OK */
 357                         return 0;
 358                 }
 359                 /* it doesn't seems to be a freshly
 360                  * erased block.
 361                  * We can't correct so many errors */
 362                 dev_dbg(host->dev, "atmel_nand : multiple errors detected."
 363                                 " Unable to correct.\n");
 364                 return -EIO;
 365         }
 366
 367         /* if there's a single bit error : we can correct it */
 368         if (ecc_status & ATMEL_ECC_ECCERR) {
 369                 /* there's nothing much to do here.
 370                  * the bit error is on the ECC itself.
 371                  */
 372                 dev_dbg(host->dev, "atmel_nand : one bit error on ECC code."
 373                                 " Nothing to correct\n");
 374                 return 0;
 375         }
 376
 377         dev_dbg(host->dev, "atmel_nand : one bit error on data."
 378                         " (word offset in the page :"
 379                         " 0x%x bit offset : 0x%x)\n",
 380                         ecc_word, ecc_bit);
 381         /* correct the error */
 382         if (nand_chip->options & NAND_BUSWIDTH_16) {
 383                 /* 16 bits words */
 384                 ((unsigned short *) dat)[ecc_word] ^= (1 << ecc_bit);
 385         } else {
 386                 /* 8 bits words */
 387                 dat[ecc_word] ^= (1 << ecc_bit);
 388         }
 389         dev_dbg(host->dev, "atmel_nand : error corrected\n");
 390         return 1;
 391 }
 392
 393 /*
 394  * Enable HW ECC : unused on most chips
 395  */
 396 static void atmel_nand_hwctl(struct mtd_info *mtd, int mode)
 397 {
 398         if (cpu_is_at32ap7000()) {
 399                 struct nand_chip *nand_chip = mtd->priv;
 400                 struct atmel_nand_host *host = nand_chip->priv;
 401                 ecc_writel(host->ecc, CR, ATMEL_ECC_RST);
 402         }
 403 }
 404
 405 #ifdef CONFIG_MTD_PARTITIONS
 406 static const char *part_probes[] = { "cmdlinepart", NULL };
 407 #endif
 408
 409 /*
 410  * Probe for the NAND device.
 411  */
 412 static int __init atmel_nand_probe(struct platform_device *pdev)
 413 {
 414         struct atmel_nand_host *host;
 415         struct mtd_info *mtd;
 416         struct nand_chip *nand_chip;
 417         struct resource *regs;
 418         struct resource *mem;
 419         int res;
 420
 421 #ifdef CONFIG_MTD_PARTITIONS
 422         struct mtd_partition *partitions = NULL;
 423         int num_partitions = 0;
 424 #endif
 425
 426         mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 427         if (!mem) {
 428                 printk(KERN_ERR "atmel_nand: can't get I/O resource mem\n");
 429                 return -ENXIO;
 430         }
 431
 432         /* Allocate memory for the device structure (and zero it) */
 433         host = kzalloc(sizeof(struct atmel_nand_host), GFP_KERNEL);
 434         if (!host) {
 435                 printk(KERN_ERR "atmel_nand: failed to allocate device structure.\n");
 436                 return -ENOMEM;
 437         }
 438
 439         host->io_base = ioremap(mem->start, mem->end - mem->start + 1);
 440         if (host->io_base == NULL) {
 441                 printk(KERN_ERR "atmel_nand: ioremap failed\n");
 442                 res = -EIO;
 443                 goto err_nand_ioremap;
 444         }
 445
 446         mtd = &host->mtd;
 447         nand_chip = &host->nand_chip;
 448         host->board = pdev->dev.platform_data;
 449         host->dev = &pdev->dev;
 450
 451         nand_chip->priv = host;         /* link the private data structures */
 452         mtd->priv = nand_chip;
 453         mtd->owner = THIS_MODULE;
 454
 455         /* Set address of NAND IO lines */
 456         nand_chip->IO_ADDR_R = host->io_base;
 457         nand_chip->IO_ADDR_W = host->io_base;
 458         nand_chip->cmd_ctrl = atmel_nand_cmd_ctrl;
 459
 460         if (host->board->rdy_pin)
 461                 nand_chip->dev_ready = atmel_nand_device_ready;
 462
 463         regs = platform_get_resource(pdev, IORESOURCE_MEM, 1);
 464         if (!regs && hard_ecc) {
 465                 printk(KERN_ERR "atmel_nand: can't get I/O resource "
 466                                 "regs\nFalling back on software ECC\n");
 467         }
 468
 469         nand_chip->ecc.mode = NAND_ECC_SOFT;    /* enable ECC */
 470         if (no_ecc)
 471                 nand_chip->ecc.mode = NAND_ECC_NONE;
 472         if (hard_ecc && regs) {
 473                 host->ecc = ioremap(regs->start, regs->end - regs->start + 1);
 474                 if (host->ecc == NULL) {
 475                         printk(KERN_ERR "atmel_nand: ioremap failed\n");
 476                         res = -EIO;
 477                         goto err_ecc_ioremap;
 478                 }
 479                 nand_chip->ecc.mode = NAND_ECC_HW_SYNDROME;
 480                 nand_chip->ecc.calculate = atmel_nand_calculate;
 481                 nand_chip->ecc.correct = atmel_nand_correct;
 482                 nand_chip->ecc.hwctl = atmel_nand_hwctl;
 483                 nand_chip->ecc.read_page = atmel_nand_read_page;
 484                 nand_chip->ecc.bytes = 4;
 485                 nand_chip->ecc.prepad = 0;
 486                 nand_chip->ecc.postpad = 0;
 487         }
 488
 489         nand_chip->chip_delay = 20;             /* 20us command delay time */
 490
 491         if (host->board->bus_width_16) {        /* 16-bit bus width */
 492                 nand_chip->options |= NAND_BUSWIDTH_16;
 493                 nand_chip->read_buf = atmel_read_buf16;
 494                 nand_chip->write_buf = atmel_write_buf16;
 495         } else {
 496                 nand_chip->read_buf = atmel_read_buf;
 497                 nand_chip->write_buf = atmel_write_buf;
 498         }
 499
 500         platform_set_drvdata(pdev, host);
 501         atmel_nand_enable(host);
 502
 503         if (host->board->det_pin) {
 504                 if (gpio_get_value(host->board->det_pin)) {
 505                         printk("No SmartMedia card inserted.\n");
 506                         res = ENXIO;
 507                         goto err_no_card;
 508                 }
 509         }
 510
 511         /* first scan to find the device and get the page size */
 512         if (nand_scan_ident(mtd, 1)) {
 513                 res = -ENXIO;
 514                 goto err_scan_ident;
 515         }
 516
 517         if (nand_chip->ecc.mode == NAND_ECC_HW_SYNDROME) {
 518                 /* ECC is calculated for the whole page (1 step) */
 519                 nand_chip->ecc.size = mtd->writesize;
 520
 521                 /* set ECC page size and oob layout */
 522                 switch (mtd->writesize) {
 523                 case 512:
 524                         nand_chip->ecc.layout = &atmel_oobinfo_small;
 525                         nand_chip->ecc.read_oob = atmel_nand_read_oob_512;
 526                         nand_chip->ecc.write_oob = atmel_nand_write_oob_512;
 527                         ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_528);
 528                         break;
 529                 case 1024:
 530                         nand_chip->ecc.layout = &atmel_oobinfo_large;
 531                         ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_1056);
 532                         break;
 533                 case 2048:
 534                         nand_chip->ecc.layout = &atmel_oobinfo_large;
 535                         ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_2112);
 536                         break;
 537                 case 4096:
 538                         nand_chip->ecc.layout = &atmel_oobinfo_large;
 539                         ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_4224);
 540                         break;
 541                 default:
 542                         /* page size not handled by HW ECC */
 543                         /* switching back to soft ECC */
 544                         nand_chip->ecc.mode = NAND_ECC_SOFT;
 545                         nand_chip->ecc.calculate = NULL;
 546                         nand_chip->ecc.correct = NULL;
 547                         nand_chip->ecc.hwctl = NULL;
 548                         nand_chip->ecc.read_page = NULL;
 549                         nand_chip->ecc.postpad = 0;
 550                         nand_chip->ecc.prepad = 0;
 551                         nand_chip->ecc.bytes = 0;
 552                         break;
 553                 }
 554         }
 555
 556         /* second phase scan */
 557         if (nand_scan_tail(mtd)) {
 558                 res = -ENXIO;
 559                 goto err_scan_tail;
 560         }
 561
 562 #ifdef CONFIG_MTD_PARTITIONS
 563 #ifdef CONFIG_MTD_CMDLINE_PARTS
 564         mtd->name = "atmel_nand";
 565         num_partitions = parse_mtd_partitions(mtd, part_probes,
 566                                               &partitions, 0);
 567 #endif
 568         if (num_partitions <= 0 && host->board->partition_info)
 569                 partitions = host->board->partition_info(mtd->size,
 570                                                          &num_partitions);
 571
 572         if ((!partitions) || (num_partitions == 0)) {
 573                 printk(KERN_ERR "atmel_nand: No parititions defined, or unsupported device.\n");
 574                 res = ENXIO;
 575                 goto err_no_partitions;
 576         }
 577
 578         res = add_mtd_partitions(mtd, partitions, num_partitions);
 579 #else
 580         res = add_mtd_device(mtd);
 581 #endif
 582
 583         if (!res)
 584                 return res;
 585
 586 #ifdef CONFIG_MTD_PARTITIONS
 587 err_no_partitions:
 588 #endif
 589         nand_release(mtd);
 590 err_scan_tail:
 591 err_scan_ident:
 592 err_no_card:
 593         atmel_nand_disable(host);
 594         platform_set_drvdata(pdev, NULL);
 595         if (host->ecc)
 596                 iounmap(host->ecc);
 597 err_ecc_ioremap:
 598         iounmap(host->io_base);
 599 err_nand_ioremap:
 600         kfree(host);
 601         return res;
 602 }
 603
 604 /*
 605  * Remove a NAND device.
 606  */
 607 static int __exit atmel_nand_remove(struct platform_device *pdev)
 608 {
 609         struct atmel_nand_host *host = platform_get_drvdata(pdev);
 610         struct mtd_info *mtd = &host->mtd;
 611
 612         nand_release(mtd);
 613
 614         atmel_nand_disable(host);
 615
 616         if (host->ecc)
 617                 iounmap(host->ecc);
 618         iounmap(host->io_base);
 619         kfree(host);
 620
 621         return 0;
 622 }
 623
 624 static struct platform_driver atmel_nand_driver = {
 625         .remove         = __exit_p(atmel_nand_remove),
 626         .driver         = {
 627                 .name   = "atmel_nand",
 628                 .owner  = THIS_MODULE,
 629         },
 630 };
 631
 632 static int __init atmel_nand_init(void)
 633 {
 634         return platform_driver_probe(&atmel_nand_driver, atmel_nand_probe);
 635 }
 636
 637
 638 static void __exit atmel_nand_exit(void)
 639 {
 640         platform_driver_unregister(&atmel_nand_driver);
 641 }
 642
 643
 644 module_init(atmel_nand_init);
 645 module_exit(atmel_nand_exit);
 646
 647 MODULE_LICENSE("GPL");
 648 MODULE_AUTHOR("Rick Bronson");
 649 MODULE_DESCRIPTION("NAND/SmartMedia driver for AT91 / AVR32");
 650 MODULE_ALIAS("platform:atmel_nand");