]> www.pilppa.org Git - linux-2.6-omap-h63xx.git/blob - drivers/mtd/chips/cfi_util.c
Merge branches 'timers/clocksource', 'timers/hrtimers', 'timers/nohz', 'timers/ntp...
[linux-2.6-omap-h63xx.git] / drivers / mtd / chips / cfi_util.c
1 /*
2  * Common Flash Interface support:
3  *   Generic utility functions not dependant on command set
4  *
5  * Copyright (C) 2002 Red Hat
6  * Copyright (C) 2003 STMicroelectronics Limited
7  *
8  * This code is covered by the GPL.
9  */
10
11 #include <linux/module.h>
12 #include <linux/types.h>
13 #include <linux/kernel.h>
14 #include <asm/io.h>
15 #include <asm/byteorder.h>
16
17 #include <linux/errno.h>
18 #include <linux/slab.h>
19 #include <linux/delay.h>
20 #include <linux/interrupt.h>
21 #include <linux/mtd/xip.h>
22 #include <linux/mtd/mtd.h>
23 #include <linux/mtd/map.h>
24 #include <linux/mtd/cfi.h>
25 #include <linux/mtd/compatmac.h>
26
27 struct cfi_extquery *
28 __xipram cfi_read_pri(struct map_info *map, __u16 adr, __u16 size, const char* name)
29 {
30         struct cfi_private *cfi = map->fldrv_priv;
31         __u32 base = 0; // cfi->chips[0].start;
32         int ofs_factor = cfi->interleave * cfi->device_type;
33         int i;
34         struct cfi_extquery *extp = NULL;
35
36         printk(" %s Extended Query Table at 0x%4.4X\n", name, adr);
37         if (!adr)
38                 goto out;
39
40         extp = kmalloc(size, GFP_KERNEL);
41         if (!extp) {
42                 printk(KERN_ERR "Failed to allocate memory\n");
43                 goto out;
44         }
45
46 #ifdef CONFIG_MTD_XIP
47         local_irq_disable();
48 #endif
49
50         /* Switch it into Query Mode */
51         cfi_send_gen_cmd(0x98, 0x55, base, map, cfi, cfi->device_type, NULL);
52
53         /* Read in the Extended Query Table */
54         for (i=0; i<size; i++) {
55                 ((unsigned char *)extp)[i] =
56                         cfi_read_query(map, base+((adr+i)*ofs_factor));
57         }
58
59         /* Make sure it returns to read mode */
60         cfi_send_gen_cmd(0xf0, 0, base, map, cfi, cfi->device_type, NULL);
61         cfi_send_gen_cmd(0xff, 0, base, map, cfi, cfi->device_type, NULL);
62
63 #ifdef CONFIG_MTD_XIP
64         (void) map_read(map, base);
65         xip_iprefetch();
66         local_irq_enable();
67 #endif
68
69  out:   return extp;
70 }
71
72 EXPORT_SYMBOL(cfi_read_pri);
73
74 void cfi_fixup(struct mtd_info *mtd, struct cfi_fixup *fixups)
75 {
76         struct map_info *map = mtd->priv;
77         struct cfi_private *cfi = map->fldrv_priv;
78         struct cfi_fixup *f;
79
80         for (f=fixups; f->fixup; f++) {
81                 if (((f->mfr == CFI_MFR_ANY) || (f->mfr == cfi->mfr)) &&
82                     ((f->id  == CFI_ID_ANY)  || (f->id  == cfi->id))) {
83                         f->fixup(mtd, f->param);
84                 }
85         }
86 }
87
88 EXPORT_SYMBOL(cfi_fixup);
89
90 int cfi_varsize_frob(struct mtd_info *mtd, varsize_frob_t frob,
91                                      loff_t ofs, size_t len, void *thunk)
92 {
93         struct map_info *map = mtd->priv;
94         struct cfi_private *cfi = map->fldrv_priv;
95         unsigned long adr;
96         int chipnum, ret = 0;
97         int i, first;
98         struct mtd_erase_region_info *regions = mtd->eraseregions;
99
100         if (ofs > mtd->size)
101                 return -EINVAL;
102
103         if ((len + ofs) > mtd->size)
104                 return -EINVAL;
105
106         /* Check that both start and end of the requested erase are
107          * aligned with the erasesize at the appropriate addresses.
108          */
109
110         i = 0;
111
112         /* Skip all erase regions which are ended before the start of
113            the requested erase. Actually, to save on the calculations,
114            we skip to the first erase region which starts after the
115            start of the requested erase, and then go back one.
116         */
117
118         while (i < mtd->numeraseregions && ofs >= regions[i].offset)
119                i++;
120         i--;
121
122         /* OK, now i is pointing at the erase region in which this
123            erase request starts. Check the start of the requested
124            erase range is aligned with the erase size which is in
125            effect here.
126         */
127
128         if (ofs & (regions[i].erasesize-1))
129                 return -EINVAL;
130
131         /* Remember the erase region we start on */
132         first = i;
133
134         /* Next, check that the end of the requested erase is aligned
135          * with the erase region at that address.
136          */
137
138         while (i<mtd->numeraseregions && (ofs + len) >= regions[i].offset)
139                 i++;
140
141         /* As before, drop back one to point at the region in which
142            the address actually falls
143         */
144         i--;
145
146         if ((ofs + len) & (regions[i].erasesize-1))
147                 return -EINVAL;
148
149         chipnum = ofs >> cfi->chipshift;
150         adr = ofs - (chipnum << cfi->chipshift);
151
152         i=first;
153
154         while(len) {
155                 int size = regions[i].erasesize;
156
157                 ret = (*frob)(map, &cfi->chips[chipnum], adr, size, thunk);
158
159                 if (ret)
160                         return ret;
161
162                 adr += size;
163                 ofs += size;
164                 len -= size;
165
166                 if (ofs == regions[i].offset + size * regions[i].numblocks)
167                         i++;
168
169                 if (adr >> cfi->chipshift) {
170                         adr = 0;
171                         chipnum++;
172
173                         if (chipnum >= cfi->numchips)
174                         break;
175                 }
176         }
177
178         return 0;
179 }
180
181 EXPORT_SYMBOL(cfi_varsize_frob);
182
183 MODULE_LICENSE("GPL");