2 # Multifunction miscellaneous devices
5 menu "Multifunction device drivers"
13 tristate "Support for Silicon Motion SM501"
15 This is the core driver for the Silicon Motion SM501 multimedia
16 companion chip. This device is a multifunction device which may
17 provide numerous interfaces including USB host controller, USB gadget,
18 asynchronous serial ports, audio functions, and a dual display video
19 interface. The device may be connected by PCI or local bus with
20 varying functions enabled.
23 bool "Export GPIO via GPIO layer"
24 depends on MFD_SM501 && GPIOLIB
26 This option uses the gpio library layer to export the 64 GPIO
27 lines on the SM501. The platform data is used to supply the
28 base number for the first GPIO line to register.
31 bool "Support for Compaq ASIC3"
32 depends on GENERIC_HARDIRQS && GPIOLIB && ARM
34 This driver supports the ASIC3 multifunction chip found on many
35 PDAs (mainly iPAQ and HTC based ones)
38 bool "HTC EGPIO support"
39 depends on GENERIC_HARDIRQS && GPIOLIB && ARM
41 This driver supports the CPLD egpio chip present on
42 several HTC phones. It provides basic support for input
43 pins, output pins, and irqs.
46 tristate "HTC PASIC3 LED/DS1WM chip support"
48 This core driver provides register access for the LED/DS1WM
49 chips labeled "AIC2" and "AIC3", found on HTC Blueangel and
50 HTC Magician devices, respectively. Actual functionality is
51 handled by the leds-pasic3 and ds1wm drivers.
54 tristate "Philips UCB1400 Core driver"
58 This enables support for the Philips UCB1400 core functions.
59 The UCB1400 is an AC97 audio codec.
61 To compile this driver as a module, choose M here: the
62 module will be called ucb1400_core.
65 bool "Texas Instruments TWL4030/TPS659x0 Support"
66 depends on I2C=y && GENERIC_HARDIRQS && (ARCH_OMAP2 || ARCH_OMAP3)
68 Say yes here if you have TWL4030 family chip on your board.
69 This core driver provides register access and IRQ handling
70 facilities, and registers devices for the various functions
71 so that function-specific drivers can bind to them.
73 These multi-function chips are found on many OMAP2 and OMAP3
74 boards, providing power management, RTC, GPIO, keypad, a
75 high speed USB OTG transceiver, an audio codec (on most
76 versions) and many other features.
79 bool "Support power sequencing scripts on TWL4030/TPS659x0"
80 depends on TWL4030_CORE
82 Say yes here if you want to use the power sequencing scripts on
83 the TWL4030/TPS659x0. These scripts control which regulators or
84 oscillators are switched off or on or reset when a sleep, wakeup
85 or warm reset event occurs.
92 bool "Support Toshiba T7L66XB"
97 Support for Toshiba Mobile IO Controller T7L66XB
100 bool "Support Toshiba TC6387XB"
105 Support for Toshiba Mobile IO Controller TC6387XB
108 bool "Support Toshiba TC6393XB"
109 depends on GPIOLIB && ARM
113 Support for Toshiba Mobile IO Controller TC6393XB
116 bool "Dialog Semiconductor DA9030/DA9034 PMIC Support"
119 Say yes here to support for Dialog Semiconductor DA9030 (a.k.a
120 ARAVA) and DA9034 (a.k.a MICCO), these are Power Management IC
121 usually found on PXA processors-based platforms. This includes
122 the I2C driver and the core APIs _only_, you have to select
123 individual components like LCD backlight, voltage regulators,
124 LEDs and battery-charger under the corresponding menus.
127 tristate "Support Wolfson Microelectronics WM8400"
130 Support for the Wolfson Microelecronics WM8400 PMIC and audio
131 CODEC. This driver adds provides common support for accessing
132 the device, additional drivers must be enabled in order to use
133 the functionality of the device.
138 config MFD_WM8350_CONFIG_MODE_0
140 depends on MFD_WM8350
142 config MFD_WM8350_CONFIG_MODE_1
144 depends on MFD_WM8350
146 config MFD_WM8350_CONFIG_MODE_2
148 depends on MFD_WM8350
150 config MFD_WM8350_CONFIG_MODE_3
152 depends on MFD_WM8350
154 config MFD_WM8350_I2C
155 tristate "Support Wolfson Microelectronics WM8350 with I2C"
159 The WM8350 is an integrated audio and power management
160 subsystem with watchdog and RTC functionality for embedded
161 systems. This option enables core support for the WM8350 with
162 I2C as the control interface. Additional options must be
163 selected to enable support for the functionality of the chip.
167 menu "Multimedia Capabilities Port drivers"
168 depends on ARCH_SA1100
175 tristate "Support SA11x0 MCP interface"
176 depends on ARCH_SA1100
181 tristate "Support for UCB1200 / UCB1300"
184 config MCP_UCB1200_TS
185 tristate "Touchscreen interface support"
186 depends on MCP_UCB1200 && INPUT