2 # Multifunction miscellaneous devices
5 menu "Multifunction device drivers"
13 tristate "Support for Silicon Motion SM501"
15 This is the core driver for the Silicon Motion SM501 multimedia
16 companion chip. This device is a multifunction device which may
17 provide numerous interfaces including USB host controller, USB gadget,
18 asynchronous serial ports, audio functions, and a dual display video
19 interface. The device may be connected by PCI or local bus with
20 varying functions enabled.
23 bool "Export GPIO via GPIO layer"
24 depends on MFD_SM501 && GPIOLIB
26 This option uses the gpio library layer to export the 64 GPIO
27 lines on the SM501. The platform data is used to supply the
28 base number for the first GPIO line to register.
31 bool "Support for Compaq ASIC3"
32 depends on GENERIC_HARDIRQS && GPIOLIB && ARM
34 This driver supports the ASIC3 multifunction chip found on many
35 PDAs (mainly iPAQ and HTC based ones)
37 config MFD_DM355EVM_MSP
38 bool "DaVinci DM355 EVM microcontroller"
39 depends on I2C && MACH_DAVINCI_DM355_EVM
41 This driver supports the MSP430 microcontroller used on these
42 boards. MSP430 firmware manages resets and power sequencing,
43 inputs from buttons and the IR remote, LEDs, an RTC, and more.
46 bool "HTC EGPIO support"
47 depends on GENERIC_HARDIRQS && GPIOLIB && ARM
49 This driver supports the CPLD egpio chip present on
50 several HTC phones. It provides basic support for input
51 pins, output pins, and irqs.
54 tristate "HTC PASIC3 LED/DS1WM chip support"
56 This core driver provides register access for the LED/DS1WM
57 chips labeled "AIC2" and "AIC3", found on HTC Blueangel and
58 HTC Magician devices, respectively. Actual functionality is
59 handled by the leds-pasic3 and ds1wm drivers.
62 tristate "Philips UCB1400 Core driver"
66 This enables support for the Philips UCB1400 core functions.
67 The UCB1400 is an AC97 audio codec.
69 To compile this driver as a module, choose M here: the
70 module will be called ucb1400_core.
73 tristate "TPS6501x Power Management chips"
74 depends on I2C && GPIOLIB
75 default y if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_OSK
77 If you say yes here you get support for the TPS6501x series of
78 Power Management chips. These include voltage regulators,
79 lithium ion/polymer battery charging, and other features that
80 are often used in portable devices like cell phones and cameras.
82 This driver can also be built as a module. If so, the module
83 will be called tps65010.
86 bool "Texas Instruments TWL4030/TPS659x0 Support"
87 depends on I2C=y && GENERIC_HARDIRQS
89 Say yes here if you have TWL4030 family chip on your board.
90 This core driver provides register access and IRQ handling
91 facilities, and registers devices for the various functions
92 so that function-specific drivers can bind to them.
94 These multi-function chips are found on many OMAP2 and OMAP3
95 boards, providing power management, RTC, GPIO, keypad, a
96 high speed USB OTG transceiver, an audio codec (on most
97 versions) and many other features.
104 bool "Support Toshiba T7L66XB"
105 depends on ARM && HAVE_CLK
109 Support for Toshiba Mobile IO Controller T7L66XB
112 bool "Support Toshiba TC6387XB"
113 depends on ARM && HAVE_CLK
117 Support for Toshiba Mobile IO Controller TC6387XB
120 bool "Support Toshiba TC6393XB"
121 depends on GPIOLIB && ARM
125 Support for Toshiba Mobile IO Controller TC6393XB
128 bool "Dialog Semiconductor DA9030/DA9034 PMIC Support"
131 Say yes here to support for Dialog Semiconductor DA9030 (a.k.a
132 ARAVA) and DA9034 (a.k.a MICCO), these are Power Management IC
133 usually found on PXA processors-based platforms. This includes
134 the I2C driver and the core APIs _only_, you have to select
135 individual components like LCD backlight, voltage regulators,
136 LEDs and battery-charger under the corresponding menus.
139 tristate "Support Wolfson Microelectronics WM8400"
143 Support for the Wolfson Microelecronics WM8400 PMIC and audio
144 CODEC. This driver adds provides common support for accessing
145 the device, additional drivers must be enabled in order to use
146 the functionality of the device.
151 config MFD_WM8350_CONFIG_MODE_0
153 depends on MFD_WM8350
155 config MFD_WM8350_CONFIG_MODE_1
157 depends on MFD_WM8350
159 config MFD_WM8350_CONFIG_MODE_2
161 depends on MFD_WM8350
163 config MFD_WM8350_CONFIG_MODE_3
165 depends on MFD_WM8350
167 config MFD_WM8351_CONFIG_MODE_0
169 depends on MFD_WM8350
171 config MFD_WM8351_CONFIG_MODE_1
173 depends on MFD_WM8350
175 config MFD_WM8351_CONFIG_MODE_2
177 depends on MFD_WM8350
179 config MFD_WM8351_CONFIG_MODE_3
181 depends on MFD_WM8350
183 config MFD_WM8352_CONFIG_MODE_0
185 depends on MFD_WM8350
187 config MFD_WM8352_CONFIG_MODE_1
189 depends on MFD_WM8350
191 config MFD_WM8352_CONFIG_MODE_2
193 depends on MFD_WM8350
195 config MFD_WM8352_CONFIG_MODE_3
197 depends on MFD_WM8350
199 config MFD_WM8350_I2C
200 tristate "Support Wolfson Microelectronics WM8350 with I2C"
204 The WM8350 is an integrated audio and power management
205 subsystem with watchdog and RTC functionality for embedded
206 systems. This option enables core support for the WM8350 with
207 I2C as the control interface. Additional options must be
208 selected to enable support for the functionality of the chip.
212 menu "Multimedia Capabilities Port drivers"
213 depends on ARCH_SA1100
220 tristate "Support SA11x0 MCP interface"
221 depends on ARCH_SA1100
226 tristate "Support for UCB1200 / UCB1300"
229 config MCP_UCB1200_TS
230 tristate "Touchscreen interface support"
231 depends on MCP_UCB1200 && INPUT