drivers/media/video/saa7134/saa7134-dvb.c

   1 /*
   2  *
   3  * (c) 2004 Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]
   4  *
   5  *  Extended 3 / 2005 by Hartmut Hackmann to support various
   6  *  cards with the tda10046 DVB-T channel decoder
   7  *
   8  *  This program is free software; you can redistribute it and/or modify
   9  *  it under the terms of the GNU General Public License as published by
  10  *  the Free Software Foundation; either version 2 of the License, or
  11  *  (at your option) any later version.
  12  *
  13  *  This program is distributed in the hope that it will be useful,
  14  *  but WITHOUT ANY WARRANTY; without even the implied warranty of
  15  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16  *  GNU General Public License for more details.
  17  *
  18  *  You should have received a copy of the GNU General Public License
  19  *  along with this program; if not, write to the Free Software
  20  *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  21  */
  22
  23 #include <linux/init.h>
  24 #include <linux/list.h>
  25 #include <linux/module.h>
  26 #include <linux/kernel.h>
  27 #include <linux/slab.h>
  28 #include <linux/delay.h>
  29 #include <linux/kthread.h>
  30 #include <linux/suspend.h>
  31
  32 #include "saa7134-reg.h"
  33 #include "saa7134.h"
  34
  35 #ifdef HAVE_MT352
  36 # include "mt352.h"
  37 # include "mt352_priv.h" /* FIXME */
  38 #endif
  39 #ifdef HAVE_TDA1004X
  40 # include "tda1004x.h"
  41 #endif
  42
  43 MODULE_AUTHOR("Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]");
  44 MODULE_LICENSE("GPL");
  45
  46 static unsigned int antenna_pwr = 0;
  47
  48 module_param(antenna_pwr, int, 0444);
  49 MODULE_PARM_DESC(antenna_pwr,"enable antenna power (Pinnacle 300i)");
  50
  51 /* ------------------------------------------------------------------ */
  52
  53 #ifdef HAVE_MT352
  54 static int pinnacle_antenna_pwr(struct saa7134_dev *dev, int on)
  55 {
  56         u32 ok;
  57
  58         if (!on) {
  59                 saa_setl(SAA7134_GPIO_GPMODE0 >> 2,     (1 << 26));
  60                 saa_clearl(SAA7134_GPIO_GPSTATUS0 >> 2, (1 << 26));
  61                 return 0;
  62         }
  63
  64         saa_setl(SAA7134_GPIO_GPMODE0 >> 2,     (1 << 26));
  65         saa_setl(SAA7134_GPIO_GPSTATUS0 >> 2,   (1 << 26));
  66         udelay(10);
  67
  68         saa_setl(SAA7134_GPIO_GPMODE0 >> 2,     (1 << 28));
  69         saa_clearl(SAA7134_GPIO_GPSTATUS0 >> 2, (1 << 28));
  70         udelay(10);
  71         saa_setl(SAA7134_GPIO_GPSTATUS0 >> 2,   (1 << 28));
  72         udelay(10);
  73         ok = saa_readl(SAA7134_GPIO_GPSTATUS0) & (1 << 27);
  74         printk("%s: %s %s\n", dev->name, __FUNCTION__,
  75                ok ? "on" : "off");
  76
  77         if (!ok)
  78                 saa_clearl(SAA7134_GPIO_GPSTATUS0 >> 2,   (1 << 26));
  79         return ok;
  80 }
  81
  82 static int mt352_pinnacle_init(struct dvb_frontend* fe)
  83 {
  84         static u8 clock_config []  = { CLOCK_CTL,  0x3d, 0x28 };
  85         static u8 reset []         = { RESET,      0x80 };
  86         static u8 adc_ctl_1_cfg [] = { ADC_CTL_1,  0x40 };
  87         static u8 agc_cfg []       = { AGC_TARGET, 0x28, 0xa0 };
  88         static u8 capt_range_cfg[] = { CAPT_RANGE, 0x31 };
  89         static u8 fsm_ctl_cfg[]    = { 0x7b,       0x04 };
  90         static u8 gpp_ctl_cfg []   = { GPP_CTL,    0x0f };
  91         static u8 scan_ctl_cfg []  = { SCAN_CTL,   0x0d };
  92         static u8 irq_cfg []       = { INTERRUPT_EN_0, 0x00, 0x00, 0x00, 0x00 };
  93         struct saa7134_dev *dev= fe->dvb->priv;
  94
  95         printk("%s: %s called\n",dev->name,__FUNCTION__);
  96
  97         mt352_write(fe, clock_config,   sizeof(clock_config));
  98         udelay(200);
  99         mt352_write(fe, reset,          sizeof(reset));
 100         mt352_write(fe, adc_ctl_1_cfg,  sizeof(adc_ctl_1_cfg));
 101         mt352_write(fe, agc_cfg,        sizeof(agc_cfg));
 102         mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg));
 103         mt352_write(fe, gpp_ctl_cfg,    sizeof(gpp_ctl_cfg));
 104
 105         mt352_write(fe, fsm_ctl_cfg,    sizeof(fsm_ctl_cfg));
 106         mt352_write(fe, scan_ctl_cfg,   sizeof(scan_ctl_cfg));
 107         mt352_write(fe, irq_cfg,        sizeof(irq_cfg));
 108         return 0;
 109 }
 110
 111 static int mt352_pinnacle_pll_set(struct dvb_frontend* fe,
 112                                   struct dvb_frontend_parameters* params,
 113                                   u8* pllbuf)
 114 {
 115         static int on  = TDA9887_PRESENT | TDA9887_PORT2_INACTIVE;
 116         static int off = TDA9887_PRESENT | TDA9887_PORT2_ACTIVE;
 117         struct saa7134_dev *dev = fe->dvb->priv;
 118         struct v4l2_frequency f;
 119
 120         /* set frequency (mt2050) */
 121         f.tuner     = 0;
 122         f.type      = V4L2_TUNER_DIGITAL_TV;
 123         f.frequency = params->frequency / 1000 * 16 / 1000;
 124         saa7134_i2c_call_clients(dev,TDA9887_SET_CONFIG,&on);
 125         saa7134_i2c_call_clients(dev,VIDIOC_S_FREQUENCY,&f);
 126         saa7134_i2c_call_clients(dev,TDA9887_SET_CONFIG,&off);
 127
 128         pinnacle_antenna_pwr(dev, antenna_pwr);
 129
 130         /* mt352 setup */
 131         mt352_pinnacle_init(fe);
 132         pllbuf[0] = 0xc2;
 133         pllbuf[1] = 0x00;
 134         pllbuf[2] = 0x00;
 135         pllbuf[3] = 0x80;
 136         pllbuf[4] = 0x00;
 137         return 0;
 138 }
 139
 140 static struct mt352_config pinnacle_300i = {
 141         .demod_address = 0x3c >> 1,
 142         .adc_clock     = 20333,
 143         .if2           = 36150,
 144         .no_tuner      = 1,
 145         .demod_init    = mt352_pinnacle_init,
 146         .pll_set       = mt352_pinnacle_pll_set,
 147 };
 148 #endif
 149
 150 /* ------------------------------------------------------------------ */
 151
 152 #ifdef HAVE_TDA1004X
 153
 154 static int philips_tda6651_pll_set(u8 addr, struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
 155 {
 156         struct saa7134_dev *dev = fe->dvb->priv;
 157         u8 tuner_buf[4];
 158         struct i2c_msg tuner_msg = {.addr = addr,.flags = 0,.buf = tuner_buf,.len =
 159                         sizeof(tuner_buf) };
 160         int tuner_frequency = 0;
 161         u8 band, cp, filter;
 162
 163         /* determine charge pump */
 164         tuner_frequency = params->frequency + 36166000;
 165         if (tuner_frequency < 87000000)
 166                 return -EINVAL;
 167         else if (tuner_frequency < 130000000)
 168                 cp = 3;
 169         else if (tuner_frequency < 160000000)
 170                 cp = 5;
 171         else if (tuner_frequency < 200000000)
 172                 cp = 6;
 173         else if (tuner_frequency < 290000000)
 174                 cp = 3;
 175         else if (tuner_frequency < 420000000)
 176                 cp = 5;
 177         else if (tuner_frequency < 480000000)
 178                 cp = 6;
 179         else if (tuner_frequency < 620000000)
 180                 cp = 3;
 181         else if (tuner_frequency < 830000000)
 182                 cp = 5;
 183         else if (tuner_frequency < 895000000)
 184                 cp = 7;
 185         else
 186                 return -EINVAL;
 187
 188         /* determine band */
 189         if (params->frequency < 49000000)
 190                 return -EINVAL;
 191         else if (params->frequency < 161000000)
 192                 band = 1;
 193         else if (params->frequency < 444000000)
 194                 band = 2;
 195         else if (params->frequency < 861000000)
 196                 band = 4;
 197         else
 198                 return -EINVAL;
 199
 200         /* setup PLL filter */
 201         switch (params->u.ofdm.bandwidth) {
 202         case BANDWIDTH_6_MHZ:
 203                 filter = 0;
 204                 break;
 205
 206         case BANDWIDTH_7_MHZ:
 207                 filter = 0;
 208                 break;
 209
 210         case BANDWIDTH_8_MHZ:
 211                 filter = 1;
 212                 break;
 213
 214         default:
 215                 return -EINVAL;
 216         }
 217
 218         /* calculate divisor
 219          * ((36166000+((1000000/6)/2)) + Finput)/(1000000/6)
 220          */
 221         tuner_frequency = (((params->frequency / 1000) * 6) + 217496) / 1000;
 222
 223         /* setup tuner buffer */
 224         tuner_buf[0] = (tuner_frequency >> 8) & 0x7f;
 225         tuner_buf[1] = tuner_frequency & 0xff;
 226         tuner_buf[2] = 0xca;
 227         tuner_buf[3] = (cp << 5) | (filter << 3) | band;
 228
 229         if (i2c_transfer(&dev->i2c_adap, &tuner_msg, 1) != 1)
 230                 return -EIO;
 231         msleep(1);
 232         return 0;
 233 }
 234
 235 static int philips_tda6651_pll_init(u8 addr, struct dvb_frontend *fe)
 236 {
 237         struct saa7134_dev *dev = fe->dvb->priv;
 238         static u8 tu1216_init[] = { 0x0b, 0xf5, 0x85, 0xab };
 239         struct i2c_msg tuner_msg = {.addr = addr,.flags = 0,.buf = tu1216_init,.len = sizeof(tu1216_init) };
 240
 241         /* setup PLL configuration */
 242         if (i2c_transfer(&dev->i2c_adap, &tuner_msg, 1) != 1)
 243                 return -EIO;
 244         msleep(1);
 245
 246         return 0;
 247 }
 248
 249 /* ------------------------------------------------------------------ */
 250
 251 static int philips_tu1216_pll_60_init(struct dvb_frontend *fe)
 252 {
 253         return philips_tda6651_pll_init(0x60, fe);
 254 }
 255
 256 static int philips_tu1216_pll_60_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
 257 {
 258         return philips_tda6651_pll_set(0x60, fe, params);
 259 }
 260
 261 static int philips_tu1216_request_firmware(struct dvb_frontend *fe,
 262                                            const struct firmware **fw, char *name)
 263 {
 264         struct saa7134_dev *dev = fe->dvb->priv;
 265         return request_firmware(fw, name, &dev->pci->dev);
 266 }
 267
 268 static struct tda1004x_config philips_tu1216_60_config = {
 269
 270         .demod_address = 0x8,
 271         .invert        = 1,
 272         .invert_oclk   = 0,
 273         .xtal_freq     = TDA10046_XTAL_4M,
 274         .agc_config    = TDA10046_AGC_DEFAULT,
 275         .if_freq       = TDA10046_FREQ_3617,
 276         .pll_init      = philips_tu1216_pll_60_init,
 277         .pll_set       = philips_tu1216_pll_60_set,
 278         .pll_sleep     = NULL,
 279         .request_firmware = philips_tu1216_request_firmware,
 280 };
 281
 282 /* ------------------------------------------------------------------ */
 283
 284 static int philips_tu1216_pll_61_init(struct dvb_frontend *fe)
 285 {
 286         return philips_tda6651_pll_init(0x61, fe);
 287 }
 288
 289 static int philips_tu1216_pll_61_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
 290 {
 291         return philips_tda6651_pll_set(0x61, fe, params);
 292 }
 293
 294 static struct tda1004x_config philips_tu1216_61_config = {
 295
 296         .demod_address = 0x8,
 297         .invert        = 1,
 298         .invert_oclk   = 0,
 299         .xtal_freq     = TDA10046_XTAL_4M,
 300         .agc_config    = TDA10046_AGC_DEFAULT,
 301         .if_freq       = TDA10046_FREQ_3617,
 302         .pll_init      = philips_tu1216_pll_61_init,
 303         .pll_set       = philips_tu1216_pll_61_set,
 304         .pll_sleep     = NULL,
 305         .request_firmware = philips_tu1216_request_firmware,
 306 };
 307
 308 /* ------------------------------------------------------------------ */
 309
 310 static int philips_europa_pll_init(struct dvb_frontend *fe)
 311 {
 312         struct saa7134_dev *dev = fe->dvb->priv;
 313         static u8 msg[] = { 0x0b, 0xf5, 0x86, 0xab };
 314         struct i2c_msg init_msg = {.addr = 0x61,.flags = 0,.buf = msg,.len = sizeof(msg) };
 315
 316         /* setup PLL configuration */
 317         if (i2c_transfer(&dev->i2c_adap, &init_msg, 1) != 1)
 318                 return -EIO;
 319         msleep(1);
 320
 321         /* switch the board to dvb mode */
 322         init_msg.addr = 0x43;
 323         init_msg.len  = 0x02;
 324         msg[0] = 0x00;
 325         msg[1] = 0x40;
 326         if (i2c_transfer(&dev->i2c_adap, &init_msg, 1) != 1)
 327                 return -EIO;
 328
 329         return 0;
 330 }
 331
 332 static int philips_td1316_pll_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
 333 {
 334         return philips_tda6651_pll_set(0x61, fe, params);
 335 }
 336
 337 static void philips_europa_analog(struct dvb_frontend *fe)
 338 {
 339         struct saa7134_dev *dev = fe->dvb->priv;
 340         /* this message actually turns the tuner back to analog mode */
 341         static u8 msg[] = { 0x0b, 0xdc, 0x86, 0xa4 };
 342         struct i2c_msg analog_msg = {.addr = 0x61,.flags = 0,.buf = msg,.len = sizeof(msg) };
 343
 344         i2c_transfer(&dev->i2c_adap, &analog_msg, 1);
 345         msleep(1);
 346
 347         /* switch the board to analog mode */
 348         analog_msg.addr = 0x43;
 349         analog_msg.len  = 0x02;
 350         msg[0] = 0x00;
 351         msg[1] = 0x14;
 352         i2c_transfer(&dev->i2c_adap, &analog_msg, 1);
 353 }
 354
 355 static struct tda1004x_config philips_europa_config = {
 356
 357         .demod_address = 0x8,
 358         .invert        = 0,
 359         .invert_oclk   = 0,
 360         .xtal_freq     = TDA10046_XTAL_4M,
 361         .agc_config    = TDA10046_AGC_IFO_AUTO_POS,
 362         .if_freq       = TDA10046_FREQ_052,
 363         .pll_init      = philips_europa_pll_init,
 364         .pll_set       = philips_td1316_pll_set,
 365         .pll_sleep     = philips_europa_analog,
 366         .request_firmware = NULL,
 367 };
 368
 369 /* ------------------------------------------------------------------ */
 370
 371 static int philips_fmd1216_pll_init(struct dvb_frontend *fe)
 372 {
 373         struct saa7134_dev *dev = fe->dvb->priv;
 374         /* this message is to set up ATC and ALC */
 375         static u8 fmd1216_init[] = { 0x0b, 0xdc, 0x9c, 0xa0 };
 376         struct i2c_msg tuner_msg = {.addr = 0x61,.flags = 0,.buf = fmd1216_init,.len = sizeof(fmd1216_init) };
 377
 378         if (i2c_transfer(&dev->i2c_adap, &tuner_msg, 1) != 1)
 379                 return -EIO;
 380         msleep(1);
 381
 382         return 0;
 383 }
 384
 385 static void philips_fmd1216_analog(struct dvb_frontend *fe)
 386 {
 387         struct saa7134_dev *dev = fe->dvb->priv;
 388         /* this message actually turns the tuner back to analog mode */
 389         static u8 fmd1216_init[] = { 0x0b, 0xdc, 0x9c, 0x60 };
 390         struct i2c_msg tuner_msg = {.addr = 0x61,.flags = 0,.buf = fmd1216_init,.len = sizeof(fmd1216_init) };
 391
 392         i2c_transfer(&dev->i2c_adap, &tuner_msg, 1);
 393         msleep(1);
 394         fmd1216_init[2] = 0x86;
 395         fmd1216_init[3] = 0x54;
 396         i2c_transfer(&dev->i2c_adap, &tuner_msg, 1);
 397         msleep(1);
 398 }
 399
 400 static int philips_fmd1216_pll_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
 401 {
 402         struct saa7134_dev *dev = fe->dvb->priv;
 403         u8 tuner_buf[4];
 404         struct i2c_msg tuner_msg = {.addr = 0x61,.flags = 0,.buf = tuner_buf,.len =
 405                         sizeof(tuner_buf) };
 406         int tuner_frequency = 0;
 407         int divider = 0;
 408         u8 band, mode, cp;
 409
 410         /* determine charge pump */
 411         tuner_frequency = params->frequency + 36130000;
 412         if (tuner_frequency < 87000000)
 413                 return -EINVAL;
 414         /* low band */
 415         else if (tuner_frequency < 180000000) {
 416                 band = 1;
 417                 mode = 7;
 418                 cp   = 0;
 419         } else if (tuner_frequency < 195000000) {
 420                 band = 1;
 421                 mode = 6;
 422                 cp   = 1;
 423         /* mid band     */
 424         } else if (tuner_frequency < 366000000) {
 425                 if (params->u.ofdm.bandwidth == BANDWIDTH_8_MHZ) {
 426                         band = 10;
 427                 } else {
 428                         band = 2;
 429                 }
 430                 mode = 7;
 431                 cp   = 0;
 432         } else if (tuner_frequency < 478000000) {
 433                 if (params->u.ofdm.bandwidth == BANDWIDTH_8_MHZ) {
 434                         band = 10;
 435                 } else {
 436                         band = 2;
 437                 }
 438                 mode = 6;
 439                 cp   = 1;
 440         /* high band */
 441         } else if (tuner_frequency < 662000000) {
 442                 if (params->u.ofdm.bandwidth == BANDWIDTH_8_MHZ) {
 443                         band = 12;
 444                 } else {
 445                         band = 4;
 446                 }
 447                 mode = 7;
 448                 cp   = 0;
 449         } else if (tuner_frequency < 840000000) {
 450                 if (params->u.ofdm.bandwidth == BANDWIDTH_8_MHZ) {
 451                         band = 12;
 452                 } else {
 453                         band = 4;
 454                 }
 455                 mode = 6;
 456                 cp   = 1;
 457         } else {
 458                 if (params->u.ofdm.bandwidth == BANDWIDTH_8_MHZ) {
 459                         band = 12;
 460                 } else {
 461                         band = 4;
 462                 }
 463                 mode = 7;
 464                 cp   = 1;
 465
 466         }
 467         /* calculate divisor */
 468         /* ((36166000 + Finput) / 166666) rounded! */
 469         divider = (tuner_frequency + 83333) / 166667;
 470
 471         /* setup tuner buffer */
 472         tuner_buf[0] = (divider >> 8) & 0x7f;
 473         tuner_buf[1] = divider & 0xff;
 474         tuner_buf[2] = 0x80 | (cp << 6) | (mode  << 3) | 4;
 475         tuner_buf[3] = 0x40 | band;
 476
 477         if (i2c_transfer(&dev->i2c_adap, &tuner_msg, 1) != 1)
 478                 return -EIO;
 479         return 0;
 480 }
 481
 482 static struct tda1004x_config medion_cardbus = {
 483         .demod_address = 0x08,
 484         .invert        = 1,
 485         .invert_oclk   = 0,
 486         .xtal_freq     = TDA10046_XTAL_16M,
 487         .agc_config    = TDA10046_AGC_IFO_AUTO_NEG,
 488         .if_freq       = TDA10046_FREQ_3613,
 489         .pll_init      = philips_fmd1216_pll_init,
 490         .pll_set       = philips_fmd1216_pll_set,
 491         .pll_sleep         = philips_fmd1216_analog,
 492         .request_firmware = NULL,
 493 };
 494
 495 /* ------------------------------------------------------------------ */
 496
 497 struct tda827x_data {
 498         u32 lomax;
 499         u8  spd;
 500         u8  bs;
 501         u8  bp;
 502         u8  cp;
 503         u8  gc3;
 504         u8 div1p5;
 505 };
 506
 507 static struct tda827x_data tda827x_dvbt[] = {
 508         { .lomax =  62000000, .spd = 3, .bs = 2, .bp = 0, .cp = 0, .gc3 = 3, .div1p5 = 1},
 509         { .lomax =  66000000, .spd = 3, .bs = 3, .bp = 0, .cp = 0, .gc3 = 3, .div1p5 = 1},
 510         { .lomax =  76000000, .spd = 3, .bs = 1, .bp = 0, .cp = 0, .gc3 = 3, .div1p5 = 0},
 511         { .lomax =  84000000, .spd = 3, .bs = 2, .bp = 0, .cp = 0, .gc3 = 3, .div1p5 = 0},
 512         { .lomax =  93000000, .spd = 3, .bs = 2, .bp = 0, .cp = 0, .gc3 = 1, .div1p5 = 0},
 513         { .lomax =  98000000, .spd = 3, .bs = 3, .bp = 0, .cp = 0, .gc3 = 1, .div1p5 = 0},
 514         { .lomax = 109000000, .spd = 3, .bs = 3, .bp = 1, .cp = 0, .gc3 = 1, .div1p5 = 0},
 515         { .lomax = 123000000, .spd = 2, .bs = 2, .bp = 1, .cp = 0, .gc3 = 1, .div1p5 = 1},
 516         { .lomax = 133000000, .spd = 2, .bs = 3, .bp = 1, .cp = 0, .gc3 = 1, .div1p5 = 1},
 517         { .lomax = 151000000, .spd = 2, .bs = 1, .bp = 1, .cp = 0, .gc3 = 1, .div1p5 = 0},
 518         { .lomax = 154000000, .spd = 2, .bs = 2, .bp = 1, .cp = 0, .gc3 = 1, .div1p5 = 0},
 519         { .lomax = 181000000, .spd = 2, .bs = 2, .bp = 1, .cp = 0, .gc3 = 0, .div1p5 = 0},
 520         { .lomax = 185000000, .spd = 2, .bs = 2, .bp = 2, .cp = 0, .gc3 = 1, .div1p5 = 0},
 521         { .lomax = 217000000, .spd = 2, .bs = 3, .bp = 2, .cp = 0, .gc3 = 1, .div1p5 = 0},
 522         { .lomax = 244000000, .spd = 1, .bs = 2, .bp = 2, .cp = 0, .gc3 = 1, .div1p5 = 1},
 523         { .lomax = 265000000, .spd = 1, .bs = 3, .bp = 2, .cp = 0, .gc3 = 1, .div1p5 = 1},
 524         { .lomax = 302000000, .spd = 1, .bs = 1, .bp = 2, .cp = 0, .gc3 = 1, .div1p5 = 0},
 525         { .lomax = 324000000, .spd = 1, .bs = 2, .bp = 2, .cp = 0, .gc3 = 1, .div1p5 = 0},
 526         { .lomax = 370000000, .spd = 1, .bs = 2, .bp = 3, .cp = 0, .gc3 = 1, .div1p5 = 0},
 527         { .lomax = 454000000, .spd = 1, .bs = 3, .bp = 3, .cp = 0, .gc3 = 1, .div1p5 = 0},
 528         { .lomax = 493000000, .spd = 0, .bs = 2, .bp = 3, .cp = 0, .gc3 = 1, .div1p5 = 1},
 529         { .lomax = 530000000, .spd = 0, .bs = 3, .bp = 3, .cp = 0, .gc3 = 1, .div1p5 = 1},
 530         { .lomax = 554000000, .spd = 0, .bs = 1, .bp = 3, .cp = 0, .gc3 = 1, .div1p5 = 0},
 531         { .lomax = 604000000, .spd = 0, .bs = 1, .bp = 4, .cp = 0, .gc3 = 0, .div1p5 = 0},
 532         { .lomax = 696000000, .spd = 0, .bs = 2, .bp = 4, .cp = 0, .gc3 = 0, .div1p5 = 0},
 533         { .lomax = 740000000, .spd = 0, .bs = 2, .bp = 4, .cp = 1, .gc3 = 0, .div1p5 = 0},
 534         { .lomax = 820000000, .spd = 0, .bs = 3, .bp = 4, .cp = 0, .gc3 = 0, .div1p5 = 0},
 535         { .lomax = 865000000, .spd = 0, .bs = 3, .bp = 4, .cp = 1, .gc3 = 0, .div1p5 = 0},
 536         { .lomax =         0, .spd = 0, .bs = 0, .bp = 0, .cp = 0, .gc3 = 0, .div1p5 = 0}
 537 };
 538
 539 static int philips_tda827x_pll_init(struct dvb_frontend *fe)
 540 {
 541         return 0;
 542 }
 543
 544 static int philips_tda827x_pll_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
 545 {
 546         struct saa7134_dev *dev = fe->dvb->priv;
 547         u8 tuner_buf[14];
 548
 549         struct i2c_msg tuner_msg = {.addr = 0x60,.flags = 0,.buf = tuner_buf,
 550                                         .len = sizeof(tuner_buf) };
 551         int i, tuner_freq, if_freq;
 552         u32 N;
 553         switch (params->u.ofdm.bandwidth) {
 554         case BANDWIDTH_6_MHZ:
 555                 if_freq = 4000000;
 556                 break;
 557         case BANDWIDTH_7_MHZ:
 558                 if_freq = 4500000;
 559                 break;
 560         default:                   /* 8 MHz or Auto */
 561                 if_freq = 5000000;
 562                 break;
 563         }
 564         tuner_freq = params->frequency + if_freq;
 565
 566         i = 0;
 567         while (tda827x_dvbt[i].lomax < tuner_freq) {
 568                 if(tda827x_dvbt[i + 1].lomax == 0)
 569                         break;
 570                 i++;
 571         }
 572
 573         N = ((tuner_freq + 125000) / 250000) << (tda827x_dvbt[i].spd + 2);
 574         tuner_buf[0] = 0;
 575         tuner_buf[1] = (N>>8) | 0x40;
 576         tuner_buf[2] = N & 0xff;
 577         tuner_buf[3] = 0;
 578         tuner_buf[4] = 0x52;
 579         tuner_buf[5] = (tda827x_dvbt[i].spd << 6) + (tda827x_dvbt[i].div1p5 << 5) +
 580                                    (tda827x_dvbt[i].bs << 3) + tda827x_dvbt[i].bp;
 581         tuner_buf[6] = (tda827x_dvbt[i].gc3 << 4) + 0x8f;
 582         tuner_buf[7] = 0xbf;
 583         tuner_buf[8] = 0x2a;
 584         tuner_buf[9] = 0x05;
 585         tuner_buf[10] = 0xff;
 586         tuner_buf[11] = 0x00;
 587         tuner_buf[12] = 0x00;
 588         tuner_buf[13] = 0x40;
 589
 590         tuner_msg.len = 14;
 591         if (i2c_transfer(&dev->i2c_adap, &tuner_msg, 1) != 1)
 592                 return -EIO;
 593
 594         msleep(500);
 595         /* correct CP value */
 596         tuner_buf[0] = 0x30;
 597         tuner_buf[1] = 0x50 + tda827x_dvbt[i].cp;
 598         tuner_msg.len = 2;
 599         i2c_transfer(&dev->i2c_adap, &tuner_msg, 1);
 600
 601         return 0;
 602 }
 603
 604 static void philips_tda827x_pll_sleep(struct dvb_frontend *fe)
 605 {
 606         struct saa7134_dev *dev = fe->dvb->priv;
 607         static u8 tda827x_sleep[] = { 0x30, 0xd0};
 608         struct i2c_msg tuner_msg = {.addr = 0x60,.flags = 0,.buf = tda827x_sleep,
 609                                     .len = sizeof(tda827x_sleep) };
 610         i2c_transfer(&dev->i2c_adap, &tuner_msg, 1);
 611 }
 612
 613 static struct tda1004x_config tda827x_lifeview_config = {
 614         .demod_address = 0x08,
 615         .invert        = 1,
 616         .invert_oclk   = 0,
 617         .xtal_freq     = TDA10046_XTAL_16M,
 618         .agc_config    = TDA10046_AGC_TDA827X,
 619         .if_freq       = TDA10046_FREQ_045,
 620         .pll_init      = philips_tda827x_pll_init,
 621         .pll_set       = philips_tda827x_pll_set,
 622         .pll_sleep         = philips_tda827x_pll_sleep,
 623         .request_firmware = NULL,
 624 };
 625 #endif
 626
 627 /* ------------------------------------------------------------------ */
 628
 629 static int dvb_init(struct saa7134_dev *dev)
 630 {
 631         /* init struct videobuf_dvb */
 632         dev->ts.nr_bufs    = 32;
 633         dev->ts.nr_packets = 32*4;
 634         dev->dvb.name = dev->name;
 635         videobuf_queue_init(&dev->dvb.dvbq, &saa7134_ts_qops,
 636                             dev->pci, &dev->slock,
 637                             V4L2_BUF_TYPE_VIDEO_CAPTURE,
 638                             V4L2_FIELD_ALTERNATE,
 639                             sizeof(struct saa7134_buf),
 640                             dev);
 641
 642         switch (dev->board) {
 643 #ifdef HAVE_MT352
 644         case SAA7134_BOARD_PINNACLE_300I_DVBT_PAL:
 645                 printk("%s: pinnacle 300i dvb setup\n",dev->name);
 646                 dev->dvb.frontend = mt352_attach(&pinnacle_300i,
 647                                                  &dev->i2c_adap);
 648                 break;
 649 #endif
 650 #ifdef HAVE_TDA1004X
 651         case SAA7134_BOARD_MD7134:
 652                 dev->dvb.frontend = tda10046_attach(&medion_cardbus,
 653                                                     &dev->i2c_adap);
 654                 break;
 655         case SAA7134_BOARD_PHILIPS_TOUGH:
 656                 dev->dvb.frontend = tda10046_attach(&philips_tu1216_60_config,
 657                                                     &dev->i2c_adap);
 658                 break;
 659         case SAA7134_BOARD_FLYDVBTDUO:
 660                 dev->dvb.frontend = tda10046_attach(&tda827x_lifeview_config,
 661                                                     &dev->i2c_adap);
 662                 break;
 663         case SAA7134_BOARD_THYPHOON_DVBT_DUO_CARDBUS:
 664                 dev->dvb.frontend = tda10046_attach(&tda827x_lifeview_config,
 665                                                     &dev->i2c_adap);
 666                 break;
 667         case SAA7134_BOARD_PHILIPS_EUROPA:
 668                 dev->dvb.frontend = tda10046_attach(&philips_europa_config,
 669                                                     &dev->i2c_adap);
 670                 break;
 671         case SAA7134_BOARD_VIDEOMATE_DVBT_300:
 672                 dev->dvb.frontend = tda10046_attach(&philips_europa_config,
 673                                                     &dev->i2c_adap);
 674                 break;
 675         case SAA7134_BOARD_VIDEOMATE_DVBT_200:
 676                 dev->dvb.frontend = tda10046_attach(&philips_tu1216_61_config,
 677                                                     &dev->i2c_adap);
 678                 break;
 679 #endif
 680         default:
 681                 printk("%s: Huh? unknown DVB card?\n",dev->name);
 682                 break;
 683         }
 684
 685         if (NULL == dev->dvb.frontend) {
 686                 printk("%s: frontend initialization failed\n",dev->name);
 687                 return -1;
 688         }
 689
 690         /* register everything else */
 691         return videobuf_dvb_register(&dev->dvb, THIS_MODULE, dev);
 692 }
 693
 694 static int dvb_fini(struct saa7134_dev *dev)
 695 {
 696         static int on  = TDA9887_PRESENT | TDA9887_PORT2_INACTIVE;
 697
 698         switch (dev->board) {
 699         case SAA7134_BOARD_PINNACLE_300I_DVBT_PAL:
 700                 /* otherwise we don't detect the tuner on next insmod */
 701                 saa7134_i2c_call_clients(dev,TDA9887_SET_CONFIG,&on);
 702                 break;
 703         };
 704         videobuf_dvb_unregister(&dev->dvb);
 705         return 0;
 706 }
 707
 708 static struct saa7134_mpeg_ops dvb_ops = {
 709         .type          = SAA7134_MPEG_DVB,
 710         .init          = dvb_init,
 711         .fini          = dvb_fini,
 712 };
 713
 714 static int __init dvb_register(void)
 715 {
 716         return saa7134_ts_register(&dvb_ops);
 717 }
 718
 719 static void __exit dvb_unregister(void)
 720 {
 721         saa7134_ts_unregister(&dvb_ops);
 722 }
 723
 724 module_init(dvb_register);
 725 module_exit(dvb_unregister);
 726
 727 /* ------------------------------------------------------------------ */
 728 /*
 729  * Local variables:
 730  * c-basic-offset: 8
 731  * End:
 732  */