drivers/media/video/em28xx/em28xx-cards.c

   1 /*
   2    em28xx-cards.c - driver for Empia EM2800/EM2820/2840 USB
   3                     video capture devices
   4
   5    Copyright (C) 2005 Ludovico Cavedon <cavedon@sssup.it>
   6                       Markus Rechberger <mrechberger@gmail.com>
   7                       Mauro Carvalho Chehab <mchehab@infradead.org>
   8                       Sascha Sommer <saschasommer@freenet.de>
   9
  10    This program is free software; you can redistribute it and/or modify
  11    it under the terms of the GNU General Public License as published by
  12    the Free Software Foundation; either version 2 of the License, or
  13    (at your option) any later version.
  14
  15    This program is distributed in the hope that it will be useful,
  16    but WITHOUT ANY WARRANTY; without even the implied warranty of
  17    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  18    GNU General Public License for more details.
  19
  20    You should have received a copy of the GNU General Public License
  21    along with this program; if not, write to the Free Software
  22    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  23  */
  24
  25 #include <linux/init.h>
  26 #include <linux/module.h>
  27 #include <linux/delay.h>
  28 #include <linux/i2c.h>
  29 #include <linux/usb.h>
  30 #include <media/tuner.h>
  31 #include <media/msp3400.h>
  32 #include <media/saa7115.h>
  33 #include <media/tvp5150.h>
  34 #include <media/tveeprom.h>
  35 #include <media/v4l2-common.h>
  36 #include <media/v4l2-chip-ident.h>
  37
  38 #include "em28xx.h"
  39
  40 static int tuner = -1;
  41 module_param(tuner, int, 0444);
  42 MODULE_PARM_DESC(tuner, "tuner type");
  43
  44 static unsigned int disable_ir;
  45 module_param(disable_ir, int, 0444);
  46 MODULE_PARM_DESC(disable_ir, "disable infrared remote support");
  47
  48 struct em28xx_hash_table {
  49         unsigned long hash;
  50         unsigned int  model;
  51         unsigned int  tuner;
  52 };
  53
  54 struct em28xx_board em28xx_boards[] = {
  55         [EM2750_BOARD_UNKNOWN] = {
  56                 .name          = "Unknown EM2750/EM2751 webcam grabber",
  57                 .vchannels     = 1,
  58                 .input         = { {
  59                         .type     = EM28XX_VMUX_COMPOSITE1,
  60                         .vmux     = 0,
  61                         .amux     = 0,
  62                 } },
  63         },
  64         [EM2800_BOARD_UNKNOWN] = {
  65                 .name         = "Unknown EM2800 video grabber",
  66                 .is_em2800    = 1,
  67                 .vchannels    = 2,
  68                 .tda9887_conf = TDA9887_PRESENT,
  69                 .decoder      = EM28XX_SAA7113,
  70                 .input           = { {
  71                         .type     = EM28XX_VMUX_COMPOSITE1,
  72                         .vmux     = SAA7115_COMPOSITE0,
  73                         .amux     = 1,
  74                 }, {
  75                         .type     = EM28XX_VMUX_SVIDEO,
  76                         .vmux     = SAA7115_SVIDEO3,
  77                         .amux     = 1,
  78                 } },
  79         },
  80         [EM2820_BOARD_UNKNOWN] = {
  81                 .name         = "Unknown EM2750/28xx video grabber",
  82                 .is_em2800    = 0,
  83                 .tuner_type   = TUNER_ABSENT,
  84         },
  85         [EM2750_BOARD_DLCW_130] = {
  86                 /* Beijing Huaqi Information Digital Technology Co., Ltd */
  87                 .name          = "Huaqi DLCW-130",
  88                 .valid         = EM28XX_BOARD_NOT_VALIDATED,
  89                 .vchannels     = 1,
  90                 .input         = { {
  91                         .type     = EM28XX_VMUX_COMPOSITE1,
  92                         .vmux     = 0,
  93                         .amux     = 0,
  94                 } },
  95         },
  96         [EM2800_BOARD_KWORLD_USB2800] = {
  97                 .name         = "Kworld USB2800",
  98                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
  99                 .is_em2800    = 1,
 100                 .vchannels    = 3,
 101                 .tuner_type   = TUNER_PHILIPS_FCV1236D,
 102                 .tda9887_conf = TDA9887_PRESENT,
 103                 .decoder      = EM28XX_SAA7113,
 104                 .input          = { {
 105                         .type     = EM28XX_VMUX_TELEVISION,
 106                         .vmux     = SAA7115_COMPOSITE2,
 107                         .amux     = 0,
 108                 }, {
 109                         .type     = EM28XX_VMUX_COMPOSITE1,
 110                         .vmux     = SAA7115_COMPOSITE0,
 111                         .amux     = 1,
 112                 }, {
 113                         .type     = EM28XX_VMUX_SVIDEO,
 114                         .vmux     = SAA7115_SVIDEO3,
 115                         .amux     = 1,
 116                 } },
 117         },
 118         [EM2820_BOARD_KWORLD_PVRTV2800RF] = {
 119                 .name         = "Kworld PVR TV 2800 RF",
 120                 .is_em2800    = 0,
 121                 .vchannels    = 2,
 122                 .tuner_type   = TUNER_TEMIC_PAL,
 123                 .tda9887_conf = TDA9887_PRESENT,
 124                 .decoder      = EM28XX_SAA7113,
 125                 .input           = { {
 126                         .type     = EM28XX_VMUX_COMPOSITE1,
 127                         .vmux     = SAA7115_COMPOSITE0,
 128                         .amux     = 1,
 129                 }, {
 130                         .type     = EM28XX_VMUX_SVIDEO,
 131                         .vmux     = SAA7115_SVIDEO3,
 132                         .amux     = 1,
 133                 } },
 134         },
 135         [EM2820_BOARD_TERRATEC_CINERGY_250] = {
 136                 .name         = "Terratec Cinergy 250 USB",
 137                 .vchannels    = 3,
 138                 .tuner_type   = TUNER_LG_PAL_NEW_TAPC,
 139                 .tda9887_conf = TDA9887_PRESENT,
 140                 .decoder      = EM28XX_SAA7113,
 141                 .input          = { {
 142                         .type     = EM28XX_VMUX_TELEVISION,
 143                         .vmux     = SAA7115_COMPOSITE2,
 144                         .amux     = 1,
 145                 }, {
 146                         .type     = EM28XX_VMUX_COMPOSITE1,
 147                         .vmux     = SAA7115_COMPOSITE0,
 148                         .amux     = 1,
 149                 }, {
 150                         .type     = EM28XX_VMUX_SVIDEO,
 151                         .vmux     = SAA7115_SVIDEO3,
 152                         .amux     = 1,
 153                 } },
 154         },
 155         [EM2820_BOARD_PINNACLE_USB_2] = {
 156                 .name         = "Pinnacle PCTV USB 2",
 157                 .vchannels    = 3,
 158                 .tuner_type   = TUNER_LG_PAL_NEW_TAPC,
 159                 .tda9887_conf = TDA9887_PRESENT,
 160                 .decoder      = EM28XX_SAA7113,
 161                 .input          = { {
 162                         .type     = EM28XX_VMUX_TELEVISION,
 163                         .vmux     = SAA7115_COMPOSITE2,
 164                         .amux     = 0,
 165                 }, {
 166                         .type     = EM28XX_VMUX_COMPOSITE1,
 167                         .vmux     = SAA7115_COMPOSITE0,
 168                         .amux     = 1,
 169                 }, {
 170                         .type     = EM28XX_VMUX_SVIDEO,
 171                         .vmux     = SAA7115_SVIDEO3,
 172                         .amux     = 1,
 173                 } },
 174         },
 175         [EM2820_BOARD_HAUPPAUGE_WINTV_USB_2] = {
 176                 .name         = "Hauppauge WinTV USB 2",
 177                 .vchannels    = 3,
 178                 .tuner_type   = TUNER_PHILIPS_FM1236_MK3,
 179                 .tda9887_conf = TDA9887_PRESENT |
 180                                 TDA9887_PORT1_ACTIVE|
 181                                 TDA9887_PORT2_ACTIVE,
 182                 .decoder      = EM28XX_TVP5150,
 183                 .has_msp34xx  = 1,
 184                 /*FIXME: S-Video not tested */
 185                 .input          = { {
 186                         .type     = EM28XX_VMUX_TELEVISION,
 187                         .vmux     = TVP5150_COMPOSITE0,
 188                         .amux     = MSP_INPUT_DEFAULT,
 189                 }, {
 190                         .type     = EM28XX_VMUX_SVIDEO,
 191                         .vmux     = TVP5150_SVIDEO,
 192                         .amux     = MSP_INPUT(MSP_IN_SCART1, MSP_IN_TUNER1,
 193                                         MSP_DSP_IN_SCART, MSP_DSP_IN_SCART),
 194                 } },
 195         },
 196         [EM2820_BOARD_DLINK_USB_TV] = {
 197                 .name         = "D-Link DUB-T210 TV Tuner",
 198                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 199                 .vchannels    = 3,
 200                 .is_em2800    = 0,
 201                 .tuner_type   = TUNER_LG_PAL_NEW_TAPC,
 202                 .tda9887_conf = TDA9887_PRESENT,
 203                 .decoder      = EM28XX_SAA7113,
 204                 .input          = { {
 205                         .type     = EM28XX_VMUX_TELEVISION,
 206                         .vmux     = SAA7115_COMPOSITE2,
 207                         .amux     = 1,
 208                 }, {
 209                         .type     = EM28XX_VMUX_COMPOSITE1,
 210                         .vmux     = SAA7115_COMPOSITE0,
 211                         .amux     = 1,
 212                 }, {
 213                         .type     = EM28XX_VMUX_SVIDEO,
 214                         .vmux     = SAA7115_SVIDEO3,
 215                         .amux     = 1,
 216                 } },
 217         },
 218         [EM2820_BOARD_HERCULES_SMART_TV_USB2] = {
 219                 .name         = "Hercules Smart TV USB 2.0",
 220                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 221                 .vchannels    = 3,
 222                 .tuner_type   = TUNER_LG_PAL_NEW_TAPC,
 223                 .tda9887_conf = TDA9887_PRESENT,
 224                 .decoder      = EM28XX_SAA7113,
 225                 .input        = { {
 226                         .type     = EM28XX_VMUX_TELEVISION,
 227                         .vmux     = SAA7115_COMPOSITE2,
 228                         .amux     = 1,
 229                 }, {
 230                         .type     = EM28XX_VMUX_COMPOSITE1,
 231                         .vmux     = SAA7115_COMPOSITE0,
 232                         .amux     = 1,
 233                 }, {
 234                         .type     = EM28XX_VMUX_SVIDEO,
 235                         .vmux     = SAA7115_SVIDEO3,
 236                         .amux     = 1,
 237                 } },
 238         },
 239         [EM2820_BOARD_PINNACLE_USB_2_FM1216ME] = {
 240                 .name         = "Pinnacle PCTV USB 2 (Philips FM1216ME)",
 241                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 242                 .vchannels    = 3,
 243                 .is_em2800    = 0,
 244                 .tuner_type   = TUNER_PHILIPS_FM1216ME_MK3,
 245                 .tda9887_conf = TDA9887_PRESENT,
 246                 .decoder      = EM28XX_SAA7113,
 247                 .input          = { {
 248                         .type     = EM28XX_VMUX_TELEVISION,
 249                         .vmux     = SAA7115_COMPOSITE2,
 250                         .amux     = 0,
 251                 }, {
 252                         .type     = EM28XX_VMUX_COMPOSITE1,
 253                         .vmux     = SAA7115_COMPOSITE0,
 254                         .amux     = 1,
 255                 }, {
 256                         .type     = EM28XX_VMUX_SVIDEO,
 257                         .vmux     = SAA7115_SVIDEO3,
 258                         .amux     = 1,
 259                 } },
 260         },
 261         [EM2820_BOARD_GADMEI_UTV310] = {
 262                 .name         = "Gadmei UTV310",
 263                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 264                 .vchannels    = 3,
 265                 .tuner_type   = TUNER_TNF_5335MF,
 266                 .tda9887_conf = TDA9887_PRESENT,
 267                 .decoder      = EM28XX_SAA7113,
 268                 .input          = { {
 269                         .type     = EM28XX_VMUX_TELEVISION,
 270                         .vmux     = SAA7115_COMPOSITE1,
 271                         .amux     = 1,
 272                 }, {
 273                         .type     = EM28XX_VMUX_COMPOSITE1,
 274                         .vmux     = SAA7115_COMPOSITE0,
 275                         .amux     = 1,
 276                 }, {
 277                         .type     = EM28XX_VMUX_SVIDEO,
 278                         .vmux     = SAA7115_SVIDEO3,
 279                         .amux     = 1,
 280                 } },
 281         },
 282         [EM2820_BOARD_LEADTEK_WINFAST_USBII_DELUXE] = {
 283                 .name         = "Leadtek Winfast USB II Deluxe",
 284                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 285                 .vchannels    = 3,
 286                 .tuner_type   = TUNER_PHILIPS_FM1216ME_MK3,
 287                 .tda9887_conf = TDA9887_PRESENT,
 288                 .decoder      = EM28XX_SAA7114,
 289                 .input          = { {
 290                         .type     = EM28XX_VMUX_TELEVISION,
 291                         .vmux     = 2,
 292                         .amux     = 0,
 293                 }, {
 294                         .type     = EM28XX_VMUX_COMPOSITE1,
 295                         .vmux     = 0,
 296                         .amux     = 1,
 297                 }, {
 298                         .type     = EM28XX_VMUX_SVIDEO,
 299                         .vmux     = 9,
 300                         .amux     = 1,
 301                 } },
 302         },
 303         [EM2820_BOARD_PINNACLE_DVC_100] = {
 304                 .name         = "Pinnacle Dazzle DVC 100",
 305                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 306                 .vchannels    = 3,
 307                 .decoder      = EM28XX_SAA7113,
 308                 .input          = { {
 309                         .type     = EM28XX_VMUX_COMPOSITE1,
 310                         .vmux     = SAA7115_COMPOSITE0,
 311                         .amux     = 1,
 312                 }, {
 313                         .type     = EM28XX_VMUX_SVIDEO,
 314                         .vmux     = SAA7115_SVIDEO3,
 315                         .amux     = 1,
 316                 } },
 317         },
 318         [EM2820_BOARD_VIDEOLOGY_20K14XUSB] = {
 319                 .name          = "Videology 20K14XUSB USB2.0",
 320                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 321                 .vchannels     = 1,
 322                 .input         = { {
 323                         .type     = EM28XX_VMUX_COMPOSITE1,
 324                         .vmux     = 0,
 325                         .amux     = 0,
 326                 } },
 327         },
 328         [EM2821_BOARD_PROLINK_PLAYTV_USB2] = {
 329                 .name         = "SIIG AVTuner-PVR/Prolink PlayTV USB 2.0",
 330                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 331                 .vchannels    = 3,
 332                 .is_em2800    = 0,
 333                 .tuner_type   = TUNER_LG_PAL_NEW_TAPC,  /* unknown? */
 334                 .tda9887_conf = TDA9887_PRESENT,        /* unknown? */
 335                 .decoder      = EM28XX_SAA7113,
 336                 .input          = { {
 337                         .type     = EM28XX_VMUX_TELEVISION,
 338                         .vmux     = SAA7115_COMPOSITE2,
 339                         .amux     = 1,
 340                 }, {
 341                         .type     = EM28XX_VMUX_COMPOSITE1,
 342                         .vmux     = SAA7115_COMPOSITE0,
 343                         .amux     = 1,
 344                 }, {
 345                         .type     = EM28XX_VMUX_SVIDEO,
 346                         .vmux     = SAA7115_SVIDEO3,
 347                         .amux     = 1,
 348                 } },
 349         },
 350         [EM2821_BOARD_SUPERCOMP_USB_2] = {
 351                 .name         = "Supercomp USB 2.0 TV",
 352                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 353                 .vchannels    = 3,
 354                 .is_em2800    = 0,
 355                 .tuner_type   = TUNER_PHILIPS_FM1236_MK3,
 356                 .tda9887_conf = TDA9887_PRESENT |
 357                                 TDA9887_PORT1_ACTIVE |
 358                                 TDA9887_PORT2_ACTIVE,
 359                 .decoder      = EM28XX_SAA7113,
 360                 .input          = { {
 361                         .type     = EM28XX_VMUX_TELEVISION,
 362                         .vmux     = SAA7115_COMPOSITE2,
 363                         .amux     = 1,
 364                 }, {
 365                         .type     = EM28XX_VMUX_COMPOSITE1,
 366                         .vmux     = SAA7115_COMPOSITE0,
 367                         .amux     = 0,
 368                 }, {
 369                         .type     = EM28XX_VMUX_SVIDEO,
 370                         .vmux     = SAA7115_SVIDEO3,
 371                         .amux     = 1,
 372                 } },
 373         },
 374         [EM2821_BOARD_USBGEAR_VD204] = {
 375                 .name          = "Usbgear VD204v9",
 376                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 377                 .vchannels     = 2,
 378                 .decoder       = EM28XX_SAA7113,
 379                 .input          = { {
 380                         .type  = EM28XX_VMUX_COMPOSITE1,
 381                         .vmux  = SAA7115_COMPOSITE0,
 382                         .amux  = 1,
 383                 }, {
 384                         .type  = EM28XX_VMUX_SVIDEO,
 385                         .vmux  = SAA7115_SVIDEO3,
 386                         .amux  = 1,
 387                 } },
 388         },
 389         [EM2860_BOARD_NETGMBH_CAM] = {
 390                 /* Beijing Huaqi Information Digital Technology Co., Ltd */
 391                 .name          = "NetGMBH Cam",
 392                 .valid       = EM28XX_BOARD_NOT_VALIDATED,
 393                 .vchannels     = 1,
 394                 .input         = { {
 395                         .type     = EM28XX_VMUX_COMPOSITE1,
 396                         .vmux     = 0,
 397                         .amux     = 0,
 398                 } },
 399         },
 400         [EM2860_BOARD_TYPHOON_DVD_MAKER] = {
 401                 .name          = "Typhoon DVD Maker",
 402                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 403                 .vchannels     = 2,
 404                 .decoder       = EM28XX_SAA7113,
 405                 .input          = { {
 406                         .type  = EM28XX_VMUX_COMPOSITE1,
 407                         .vmux  = SAA7115_COMPOSITE0,
 408                         .amux  = 1,
 409                 }, {
 410                         .type  = EM28XX_VMUX_SVIDEO,
 411                         .vmux  = SAA7115_SVIDEO3,
 412                         .amux  = 1,
 413                 } },
 414         },
 415         [EM2860_BOARD_GADMEI_UTV330] = {
 416                 .name         = "Gadmei UTV330",
 417                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 418                 .vchannels    = 3,
 419                 .tuner_type   = TUNER_TNF_5335MF,
 420                 .tda9887_conf = TDA9887_PRESENT,
 421                 .decoder      = EM28XX_SAA7113,
 422                 .input          = { {
 423                         .type     = EM28XX_VMUX_TELEVISION,
 424                         .vmux     = SAA7115_COMPOSITE2,
 425                         .amux     = 0,
 426                 }, {
 427                         .type     = EM28XX_VMUX_COMPOSITE1,
 428                         .vmux     = SAA7115_COMPOSITE0,
 429                         .amux     = 1,
 430                 }, {
 431                         .type     = EM28XX_VMUX_SVIDEO,
 432                         .vmux     = SAA7115_SVIDEO3,
 433                         .amux     = 1,
 434                 } },
 435         },
 436         [EM2860_BOARD_TERRATEC_HYBRID_XS] = {
 437                 .name         = "Terratec Cinergy A Hybrid XS",
 438                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 439                 .vchannels    = 3,
 440                 .tuner_type   = TUNER_XC2028,
 441                 .decoder      = EM28XX_TVP5150,
 442                 .input          = { {
 443                         .type     = EM28XX_VMUX_TELEVISION,
 444                         .vmux     = TVP5150_COMPOSITE0,
 445                         .amux     = 0,
 446                 }, {
 447                         .type     = EM28XX_VMUX_COMPOSITE1,
 448                         .vmux     = TVP5150_COMPOSITE1,
 449                         .amux     = 1,
 450                 }, {
 451                         .type     = EM28XX_VMUX_SVIDEO,
 452                         .vmux     = TVP5150_SVIDEO,
 453                         .amux     = 1,
 454                 } },
 455         },
 456         [EM2861_BOARD_KWORLD_PVRTV_300U] = {
 457                 .name         = "KWorld PVRTV 300U",
 458                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 459                 .vchannels    = 3,
 460                 .tuner_type   = TUNER_XC2028,
 461                 .decoder      = EM28XX_TVP5150,
 462                 .input          = { {
 463                         .type     = EM28XX_VMUX_TELEVISION,
 464                         .vmux     = TVP5150_COMPOSITE0,
 465                         .amux     = 0,
 466                 }, {
 467                         .type     = EM28XX_VMUX_COMPOSITE1,
 468                         .vmux     = TVP5150_COMPOSITE1,
 469                         .amux     = 1,
 470                 }, {
 471                         .type     = EM28XX_VMUX_SVIDEO,
 472                         .vmux     = TVP5150_SVIDEO,
 473                         .amux     = 1,
 474                 } },
 475         },
 476         [EM2861_BOARD_YAKUMO_MOVIE_MIXER] = {
 477                 .name          = "Yakumo MovieMixer",
 478                 .valid       = EM28XX_BOARD_NOT_VALIDATED,
 479                 .vchannels     = 1,
 480                 .decoder       = EM28XX_TVP5150,
 481                 .input         = { {
 482                         .type     = EM28XX_VMUX_TELEVISION,
 483                         .vmux     = TVP5150_COMPOSITE0,
 484                         .amux     = 0,
 485                 }, {
 486                         .type     = EM28XX_VMUX_COMPOSITE1,
 487                         .vmux     = TVP5150_COMPOSITE1,
 488                         .amux     = 1,
 489                 }, {
 490                         .type     = EM28XX_VMUX_SVIDEO,
 491                         .vmux     = TVP5150_SVIDEO,
 492                         .amux     = 1,
 493                 } },
 494         },
 495         [EM2861_BOARD_PLEXTOR_PX_TV100U] = {
 496                 .name         = "Plextor ConvertX PX-TV100U",
 497                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 498                 .vchannels    = 3,
 499                 .tuner_type   = TUNER_TNF_5335MF,
 500                 .tda9887_conf = TDA9887_PRESENT,
 501                 .decoder      = EM28XX_TVP5150,
 502                 .input          = { {
 503                         .type     = EM28XX_VMUX_TELEVISION,
 504                         .vmux     = TVP5150_COMPOSITE0,
 505                         .amux     = 1,
 506                 }, {
 507                         .type     = EM28XX_VMUX_COMPOSITE1,
 508                         .vmux     = TVP5150_COMPOSITE1,
 509                         .amux     = 1,
 510                 }, {
 511                         .type     = EM28XX_VMUX_SVIDEO,
 512                         .vmux     = TVP5150_SVIDEO,
 513                         .amux     = 1,
 514                 } },
 515         },
 516         [EM2870_BOARD_TERRATEC_XS] = {
 517                 .name         = "Terratec Cinergy T XS",
 518                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 519                 .tuner_type   = TUNER_XC2028,
 520         },
 521         [EM2870_BOARD_TERRATEC_XS_MT2060] = {
 522                 .name         = "Terratec Cinergy T XS (MT2060)",
 523                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 524                 .tuner_type   = TUNER_ABSENT, /* MT2060 */
 525         },
 526         [EM2870_BOARD_KWORLD_350U] = {
 527                 .name         = "Kworld 350 U DVB-T",
 528                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 529                 .tuner_type   = TUNER_XC2028,
 530         },
 531         [EM2870_BOARD_KWORLD_355U] = {
 532                 .name         = "Kworld 355 U DVB-T",
 533                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 534         },
 535         [EM2870_BOARD_PINNACLE_PCTV_DVB] = {
 536                 .name         = "Pinnacle PCTV DVB-T",
 537                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 538                 .tuner_type   = TUNER_ABSENT, /* MT2060 */
 539         },
 540         [EM2870_BOARD_COMPRO_VIDEOMATE] = {
 541                 .name         = "Compro, VideoMate U3",
 542                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 543                 .tuner_type   = TUNER_ABSENT, /* MT2060 */
 544         },
 545         [EM2880_BOARD_TERRATEC_HYBRID_XS_FR] = {
 546                 .name         = "Terratec Hybrid XS Secam",
 547                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 548                 .vchannels    = 3,
 549                 .has_msp34xx  = 1,
 550                 .tuner_type   = TUNER_XC2028,
 551                 .decoder      = EM28XX_TVP5150,
 552                 .input          = { {
 553                         .type     = EM28XX_VMUX_TELEVISION,
 554                         .vmux     = TVP5150_COMPOSITE0,
 555                         .amux     = 0,
 556                 }, {
 557                         .type     = EM28XX_VMUX_COMPOSITE1,
 558                         .vmux     = TVP5150_COMPOSITE1,
 559                         .amux     = 1,
 560                 }, {
 561                         .type     = EM28XX_VMUX_SVIDEO,
 562                         .vmux     = TVP5150_SVIDEO,
 563                         .amux     = 1,
 564                 } },
 565         },
 566         [EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900] = {
 567                 .name         = "Hauppauge WinTV HVR 900",
 568                 .vchannels    = 3,
 569                 .tda9887_conf = TDA9887_PRESENT,
 570                 .tuner_type   = TUNER_XC2028,
 571                 .mts_firmware = 1,
 572                 .has_dvb        = 1,
 573                 .decoder      = EM28XX_TVP5150,
 574                 .input          = { {
 575                         .type     = EM28XX_VMUX_TELEVISION,
 576                         .vmux     = TVP5150_COMPOSITE0,
 577                         .amux     = 0,
 578                 }, {
 579                         .type     = EM28XX_VMUX_COMPOSITE1,
 580                         .vmux     = TVP5150_COMPOSITE1,
 581                         .amux     = 1,
 582                 }, {
 583                         .type     = EM28XX_VMUX_SVIDEO,
 584                         .vmux     = TVP5150_SVIDEO,
 585                         .amux     = 1,
 586                 } },
 587         },
 588         [EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2] = {
 589                 .name         = "Hauppauge WinTV HVR 900 (R2)",
 590                 .vchannels    = 3,
 591                 .tda9887_conf = TDA9887_PRESENT,
 592                 .tuner_type   = TUNER_XC2028,
 593                 .mts_firmware = 1,
 594                 .decoder      = EM28XX_TVP5150,
 595                 .input          = { {
 596                         .type     = EM28XX_VMUX_TELEVISION,
 597                         .vmux     = TVP5150_COMPOSITE0,
 598                         .amux     = 0,
 599                 }, {
 600                         .type     = EM28XX_VMUX_COMPOSITE1,
 601                         .vmux     = TVP5150_COMPOSITE1,
 602                         .amux     = 1,
 603                 }, {
 604                         .type     = EM28XX_VMUX_SVIDEO,
 605                         .vmux     = TVP5150_SVIDEO,
 606                         .amux     = 1,
 607                 } },
 608         },
 609         [EM2880_BOARD_HAUPPAUGE_WINTV_HVR_950] = {
 610                 .name           = "Hauppauge WinTV HVR 950",
 611                 .vchannels      = 3,
 612                 .tda9887_conf   = TDA9887_PRESENT,
 613                 .tuner_type     = TUNER_XC2028,
 614                 .mts_firmware   = 1,
 615                 .has_12mhz_i2s  = 1,
 616                 .has_dvb        = 1,
 617                 .decoder        = EM28XX_TVP5150,
 618                 .input          = { {
 619                         .type     = EM28XX_VMUX_TELEVISION,
 620                         .vmux     = TVP5150_COMPOSITE0,
 621                         .amux     = 0,
 622                 }, {
 623                         .type     = EM28XX_VMUX_COMPOSITE1,
 624                         .vmux     = TVP5150_COMPOSITE1,
 625                         .amux     = 1,
 626                 }, {
 627                         .type     = EM28XX_VMUX_SVIDEO,
 628                         .vmux     = TVP5150_SVIDEO,
 629                         .amux     = 1,
 630                 } },
 631         },
 632         [EM2880_BOARD_PINNACLE_PCTV_HD_PRO] = {
 633                 .name           = "Pinnacle PCTV HD Pro Stick",
 634                 .vchannels      = 3,
 635                 .tda9887_conf   = TDA9887_PRESENT,
 636                 .tuner_type     = TUNER_XC2028,
 637                 .mts_firmware   = 1,
 638                 .has_12mhz_i2s  = 1,
 639                 .has_dvb        = 1,
 640                 .decoder        = EM28XX_TVP5150,
 641                 .input          = { {
 642                         .type     = EM28XX_VMUX_TELEVISION,
 643                         .vmux     = TVP5150_COMPOSITE0,
 644                         .amux     = 0,
 645                 }, {
 646                         .type     = EM28XX_VMUX_COMPOSITE1,
 647                         .vmux     = TVP5150_COMPOSITE1,
 648                         .amux     = 1,
 649                 }, {
 650                         .type     = EM28XX_VMUX_SVIDEO,
 651                         .vmux     = TVP5150_SVIDEO,
 652                         .amux     = 1,
 653                 } },
 654         },
 655         [EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600] = {
 656                 .name           = "AMD ATI TV Wonder HD 600",
 657                 .vchannels      = 3,
 658                 .tda9887_conf   = TDA9887_PRESENT,
 659                 .tuner_type     = TUNER_XC2028,
 660                 .mts_firmware   = 1,
 661                 .has_12mhz_i2s  = 1,
 662                 .has_dvb        = 1,
 663                 .decoder        = EM28XX_TVP5150,
 664                 .input          = { {
 665                         .type     = EM28XX_VMUX_TELEVISION,
 666                         .vmux     = TVP5150_COMPOSITE0,
 667                         .amux     = 0,
 668                 }, {
 669                         .type     = EM28XX_VMUX_COMPOSITE1,
 670                         .vmux     = TVP5150_COMPOSITE1,
 671                         .amux     = 1,
 672                 }, {
 673                         .type     = EM28XX_VMUX_SVIDEO,
 674                         .vmux     = TVP5150_SVIDEO,
 675                         .amux     = 1,
 676                 } },
 677         },
 678         [EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600] = {
 679                 .name           = "AMD ATI TV Wonder HD 600",
 680                 .vchannels      = 3,
 681                 .tda9887_conf   = TDA9887_PRESENT,
 682                 .tuner_type     = TUNER_XC2028,
 683                 .mts_firmware   = 1,
 684                 .has_12mhz_i2s  = 1,
 685                 .has_dvb        = 1,
 686                 .decoder        = EM28XX_TVP5150,
 687                 .input          = { {
 688                         .type     = EM28XX_VMUX_TELEVISION,
 689                         .vmux     = TVP5150_COMPOSITE0,
 690                         .amux     = 0,
 691                 }, {
 692                         .type     = EM28XX_VMUX_COMPOSITE1,
 693                         .vmux     = TVP5150_COMPOSITE1,
 694                         .amux     = 1,
 695                 }, {
 696                         .type     = EM28XX_VMUX_SVIDEO,
 697                         .vmux     = TVP5150_SVIDEO,
 698                         .amux     = 1,
 699                 } },
 700         },
 701         [EM2880_BOARD_TERRATEC_HYBRID_XS] = {
 702                 .name         = "Terratec Hybrid XS",
 703                 .vchannels    = 3,
 704                 .tda9887_conf = TDA9887_PRESENT,
 705                 .tuner_type   = TUNER_XC2028,
 706                 .decoder      = EM28XX_TVP5150,
 707                 .has_dvb        = 1,
 708                 .input          = { {
 709                         .type     = EM28XX_VMUX_TELEVISION,
 710                         .vmux     = TVP5150_COMPOSITE0,
 711                         .amux     = 0,
 712                 }, {
 713                         .type     = EM28XX_VMUX_COMPOSITE1,
 714                         .vmux     = TVP5150_COMPOSITE1,
 715                         .amux     = 1,
 716                 }, {
 717                         .type     = EM28XX_VMUX_SVIDEO,
 718                         .vmux     = TVP5150_SVIDEO,
 719                         .amux     = 1,
 720                 } },
 721         },
 722         /* maybe there's a reason behind it why Terratec sells the Hybrid XS
 723            as Prodigy XS with a different PID, let's keep it separated for now
 724            maybe we'll need it lateron */
 725         [EM2880_BOARD_TERRATEC_PRODIGY_XS] = {
 726                 .name         = "Terratec Prodigy XS",
 727                 .vchannels    = 3,
 728                 .tda9887_conf = TDA9887_PRESENT,
 729                 .tuner_type   = TUNER_XC2028,
 730                 .decoder      = EM28XX_TVP5150,
 731                 .input          = { {
 732                         .type     = EM28XX_VMUX_TELEVISION,
 733                         .vmux     = TVP5150_COMPOSITE0,
 734                         .amux     = 0,
 735                 }, {
 736                         .type     = EM28XX_VMUX_COMPOSITE1,
 737                         .vmux     = TVP5150_COMPOSITE1,
 738                         .amux     = 1,
 739                 }, {
 740                         .type     = EM28XX_VMUX_SVIDEO,
 741                         .vmux     = TVP5150_SVIDEO,
 742                         .amux     = 1,
 743                 } },
 744         },
 745         [EM2820_BOARD_MSI_VOX_USB_2] = {
 746                 .name              = "MSI VOX USB 2.0",
 747                 .vchannels         = 3,
 748                 .tuner_type        = TUNER_LG_PAL_NEW_TAPC,
 749                 .tda9887_conf      = TDA9887_PRESENT      |
 750                                      TDA9887_PORT1_ACTIVE |
 751                                      TDA9887_PORT2_ACTIVE,
 752                 .max_range_640_480 = 1,
 753
 754                 .decoder           = EM28XX_SAA7114,
 755                 .input             = { {
 756                         .type      = EM28XX_VMUX_TELEVISION,
 757                         .vmux      = SAA7115_COMPOSITE4,
 758                         .amux      = 0,
 759                 }, {
 760                         .type      = EM28XX_VMUX_COMPOSITE1,
 761                         .vmux      = SAA7115_COMPOSITE0,
 762                         .amux      = 1,
 763                 }, {
 764                         .type      = EM28XX_VMUX_SVIDEO,
 765                         .vmux      = SAA7115_SVIDEO3,
 766                         .amux      = 1,
 767                 } },
 768         },
 769         [EM2800_BOARD_TERRATEC_CINERGY_200] = {
 770                 .name         = "Terratec Cinergy 200 USB",
 771                 .is_em2800    = 1,
 772                 .vchannels    = 3,
 773                 .tuner_type   = TUNER_LG_PAL_NEW_TAPC,
 774                 .tda9887_conf = TDA9887_PRESENT,
 775                 .decoder      = EM28XX_SAA7113,
 776                 .input          = { {
 777                         .type     = EM28XX_VMUX_TELEVISION,
 778                         .vmux     = SAA7115_COMPOSITE2,
 779                         .amux     = 0,
 780                 }, {
 781                         .type     = EM28XX_VMUX_COMPOSITE1,
 782                         .vmux     = SAA7115_COMPOSITE0,
 783                         .amux     = 1,
 784                 }, {
 785                         .type     = EM28XX_VMUX_SVIDEO,
 786                         .vmux     = SAA7115_SVIDEO3,
 787                         .amux     = 1,
 788                 } },
 789         },
 790         [EM2800_BOARD_GRABBEEX_USB2800] = {
 791                 .name         = "eMPIA Technology, Inc. GrabBeeX+ Video Encoder",
 792                 .is_em2800    = 1,
 793                 .vchannels    = 2,
 794                 .decoder      = EM28XX_SAA7113,
 795                 .input          = { {
 796                         .type     = EM28XX_VMUX_COMPOSITE1,
 797                         .vmux     = SAA7115_COMPOSITE0,
 798                         .amux     = 1,
 799                 }, {
 800                         .type     = EM28XX_VMUX_SVIDEO,
 801                         .vmux     = SAA7115_SVIDEO3,
 802                         .amux     = 1,
 803                 } },
 804         },
 805         [EM2800_BOARD_LEADTEK_WINFAST_USBII] = {
 806                 .name         = "Leadtek Winfast USB II",
 807                 .is_em2800    = 1,
 808                 .vchannels    = 3,
 809                 .tuner_type   = TUNER_LG_PAL_NEW_TAPC,
 810                 .tda9887_conf = TDA9887_PRESENT,
 811                 .decoder      = EM28XX_SAA7113,
 812                 .input          = { {
 813                         .type     = EM28XX_VMUX_TELEVISION,
 814                         .vmux     = SAA7115_COMPOSITE2,
 815                         .amux     = 0,
 816                 }, {
 817                         .type     = EM28XX_VMUX_COMPOSITE1,
 818                         .vmux     = SAA7115_COMPOSITE0,
 819                         .amux     = 1,
 820                 }, {
 821                         .type     = EM28XX_VMUX_SVIDEO,
 822                         .vmux     = SAA7115_SVIDEO3,
 823                         .amux     = 1,
 824                 } },
 825         },
 826         [EM2800_BOARD_KWORLD_USB2800] = {
 827                 .name         = "Kworld USB2800",
 828                 .is_em2800    = 1,
 829                 .vchannels    = 3,
 830                 .tuner_type   = TUNER_PHILIPS_FCV1236D,
 831                 .tda9887_conf = TDA9887_PRESENT,
 832                 .decoder      = EM28XX_SAA7113,
 833                 .input          = { {
 834                         .type     = EM28XX_VMUX_TELEVISION,
 835                         .vmux     = SAA7115_COMPOSITE2,
 836                         .amux     = 0,
 837                 }, {
 838                         .type     = EM28XX_VMUX_COMPOSITE1,
 839                         .vmux     = SAA7115_COMPOSITE0,
 840                         .amux     = 1,
 841                 }, {
 842                         .type     = EM28XX_VMUX_SVIDEO,
 843                         .vmux     = SAA7115_SVIDEO3,
 844                         .amux     = 1,
 845                 } },
 846         },
 847         [EM2820_BOARD_PINNACLE_DVC_90] = {
 848                 .name         = "Pinnacle Dazzle DVC 90/DVC 100",
 849                 .vchannels    = 3,
 850                 .tuner_type   = TUNER_ABSENT,
 851                 .decoder      = EM28XX_SAA7113,
 852                 .input          = { {
 853                         .type     = EM28XX_VMUX_COMPOSITE1,
 854                         .vmux     = SAA7115_COMPOSITE0,
 855                         .amux     = 1,
 856                 }, {
 857                         .type     = EM28XX_VMUX_SVIDEO,
 858                         .vmux     = SAA7115_SVIDEO3,
 859                         .amux     = 1,
 860                 } },
 861         },
 862         [EM2800_BOARD_VGEAR_POCKETTV] = {
 863                 .name         = "V-Gear PocketTV",
 864                 .is_em2800    = 1,
 865                 .vchannels    = 3,
 866                 .tuner_type   = TUNER_LG_PAL_NEW_TAPC,
 867                 .tda9887_conf = TDA9887_PRESENT,
 868                 .decoder      = EM28XX_SAA7113,
 869                 .input          = { {
 870                         .type     = EM28XX_VMUX_TELEVISION,
 871                         .vmux     = SAA7115_COMPOSITE2,
 872                         .amux     = 0,
 873                 }, {
 874                         .type     = EM28XX_VMUX_COMPOSITE1,
 875                         .vmux     = SAA7115_COMPOSITE0,
 876                         .amux     = 1,
 877                 }, {
 878                         .type     = EM28XX_VMUX_SVIDEO,
 879                         .vmux     = SAA7115_SVIDEO3,
 880                         .amux     = 1,
 881                 } },
 882         },
 883         [EM2820_BOARD_PROLINK_PLAYTV_USB2] = {
 884                 .name         = "Pixelview Prolink PlayTV USB 2.0",
 885                 .vchannels    = 3,
 886                 .tda9887_conf = TDA9887_PRESENT,
 887                 .tuner_type   = TUNER_YMEC_TVF_5533MF,
 888                 .decoder      = EM28XX_SAA7113,
 889                 .input          = { {
 890                         .type     = EM28XX_VMUX_TELEVISION,
 891                         .vmux     = SAA7115_COMPOSITE2,
 892                         .amux     = EM28XX_AMUX_LINE_IN,
 893                 }, {
 894                         .type     = EM28XX_VMUX_COMPOSITE1,
 895                         .vmux     = SAA7115_COMPOSITE0,
 896                         .amux     = EM28XX_AMUX_LINE_IN,
 897                 }, {
 898                         .type     = EM28XX_VMUX_SVIDEO,
 899                         .vmux     = SAA7115_SVIDEO3,
 900                         .amux     = EM28XX_AMUX_LINE_IN,
 901                 } },
 902         },
 903         [EM2860_BOARD_POINTNIX_INTRAORAL_CAMERA] = {
 904                 .name         = "PointNix Intra-Oral Camera",
 905                 .has_snapshot_button = 1,
 906                 .vchannels    = 1,
 907                 .tda9887_conf = TDA9887_PRESENT,
 908                 .tuner_type   = TUNER_ABSENT,
 909                 .decoder      = EM28XX_SAA7113,
 910                 .input          = { {
 911                         .type     = EM28XX_VMUX_SVIDEO,
 912                         .vmux     = SAA7115_SVIDEO3,
 913                         .amux     = 0,
 914                 } },
 915         },
 916         [EM2880_BOARD_MSI_DIGIVOX_AD] = {
 917                 .name         = "MSI DigiVox A/D",
 918                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 919                 .vchannels    = 3,
 920                 .tuner_type   = TUNER_XC2028,
 921                 .decoder      = EM28XX_TVP5150,
 922                 .input          = { {
 923                         .type     = EM28XX_VMUX_TELEVISION,
 924                         .vmux     = TVP5150_COMPOSITE0,
 925                         .amux     = 0,
 926                 }, {
 927                         .type     = EM28XX_VMUX_COMPOSITE1,
 928                         .vmux     = TVP5150_COMPOSITE1,
 929                         .amux     = 1,
 930                 }, {
 931                         .type     = EM28XX_VMUX_SVIDEO,
 932                         .vmux     = TVP5150_SVIDEO,
 933                         .amux     = 1,
 934                 } },
 935         },
 936         [EM2880_BOARD_MSI_DIGIVOX_AD_II] = {
 937                 .name         = "MSI DigiVox A/D II",
 938                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 939                 .vchannels    = 3,
 940                 .tuner_type   = TUNER_XC2028,
 941                 .decoder      = EM28XX_TVP5150,
 942                 .input          = { {
 943                         .type     = EM28XX_VMUX_TELEVISION,
 944                         .vmux     = TVP5150_COMPOSITE0,
 945                         .amux     = 0,
 946                 }, {
 947                         .type     = EM28XX_VMUX_COMPOSITE1,
 948                         .vmux     = TVP5150_COMPOSITE1,
 949                         .amux     = 1,
 950                 }, {
 951                         .type     = EM28XX_VMUX_SVIDEO,
 952                         .vmux     = TVP5150_SVIDEO,
 953                         .amux     = 1,
 954                 } },
 955         },
 956         [EM2880_BOARD_KWORLD_DVB_305U] = {
 957                 .name         = "KWorld DVB-T 305U",
 958                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 959                 .vchannels    = 3,
 960                 .tuner_type   = TUNER_XC2028,
 961                 .decoder      = EM28XX_TVP5150,
 962                 .input          = { {
 963                         .type     = EM28XX_VMUX_TELEVISION,
 964                         .vmux     = TVP5150_COMPOSITE0,
 965                         .amux     = 0,
 966                 }, {
 967                         .type     = EM28XX_VMUX_COMPOSITE1,
 968                         .vmux     = TVP5150_COMPOSITE1,
 969                         .amux     = 1,
 970                 }, {
 971                         .type     = EM28XX_VMUX_SVIDEO,
 972                         .vmux     = TVP5150_SVIDEO,
 973                         .amux     = 1,
 974                 } },
 975         },
 976         [EM2880_BOARD_KWORLD_DVB_310U] = {
 977                 .name         = "KWorld DVB-T 310U",
 978                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 979                 .vchannels    = 3,
 980                 .tuner_type   = TUNER_XC2028,
 981                 .decoder      = EM28XX_TVP5150,
 982                 .input          = { {
 983                         .type     = EM28XX_VMUX_TELEVISION,
 984                         .vmux     = TVP5150_COMPOSITE0,
 985                         .amux     = 0,
 986                 }, {
 987                         .type     = EM28XX_VMUX_COMPOSITE1,
 988                         .vmux     = TVP5150_COMPOSITE1,
 989                         .amux     = 1,
 990                 }, {
 991                         .type     = EM28XX_VMUX_SVIDEO,
 992                         .vmux     = TVP5150_SVIDEO,
 993                         .amux     = 1,
 994                 } },
 995         },
 996         [EM2881_BOARD_DNT_DA2_HYBRID] = {
 997                 .name         = "DNT DA2 Hybrid",
 998                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 999                 .vchannels    = 3,
1000                 .tuner_type   = TUNER_XC2028,
1001                 .decoder      = EM28XX_TVP5150,
1002                 .input          = { {
1003                         .type     = EM28XX_VMUX_TELEVISION,
1004                         .vmux     = TVP5150_COMPOSITE0,
1005                         .amux     = 0,
1006                 }, {
1007                         .type     = EM28XX_VMUX_COMPOSITE1,
1008                         .vmux     = TVP5150_COMPOSITE1,
1009                         .amux     = 1,
1010                 }, {
1011                         .type     = EM28XX_VMUX_SVIDEO,
1012                         .vmux     = TVP5150_SVIDEO,
1013                         .amux     = 1,
1014                 } },
1015         },
1016         [EM2881_BOARD_PINNACLE_HYBRID_PRO] = {
1017                 .name         = "Pinnacle Hybrid Pro",
1018                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
1019                 .vchannels    = 3,
1020                 .tuner_type   = TUNER_XC2028,
1021                 .decoder      = EM28XX_TVP5150,
1022                 .input          = { {
1023                         .type     = EM28XX_VMUX_TELEVISION,
1024                         .vmux     = TVP5150_COMPOSITE0,
1025                         .amux     = 0,
1026                 }, {
1027                         .type     = EM28XX_VMUX_COMPOSITE1,
1028                         .vmux     = TVP5150_COMPOSITE1,
1029                         .amux     = 1,
1030                 }, {
1031                         .type     = EM28XX_VMUX_SVIDEO,
1032                         .vmux     = TVP5150_SVIDEO,
1033                         .amux     = 1,
1034                 } },
1035         },
1036         [EM2882_BOARD_PINNACLE_HYBRID_PRO] = {
1037                 .name         = "Pinnacle Hybrid Pro (2)",
1038                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
1039                 .vchannels    = 3,
1040                 .tuner_type   = TUNER_XC2028,
1041                 .decoder      = EM28XX_TVP5150,
1042                 .input          = { {
1043                         .type     = EM28XX_VMUX_TELEVISION,
1044                         .vmux     = TVP5150_COMPOSITE0,
1045                         .amux     = 0,
1046                 }, {
1047                         .type     = EM28XX_VMUX_COMPOSITE1,
1048                         .vmux     = TVP5150_COMPOSITE1,
1049                         .amux     = 1,
1050                 }, {
1051                         .type     = EM28XX_VMUX_SVIDEO,
1052                         .vmux     = TVP5150_SVIDEO,
1053                         .amux     = 1,
1054                 } },
1055         },
1056         [EM2882_BOARD_KWORLD_VS_DVBT] = {
1057                 .name         = "Kworld VS-DVB-T 323UR",
1058                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
1059                 .vchannels    = 3,
1060                 .tuner_type   = TUNER_XC2028,
1061                 .decoder      = EM28XX_TVP5150,
1062                 .input          = { {
1063                         .type     = EM28XX_VMUX_TELEVISION,
1064                         .vmux     = TVP5150_COMPOSITE0,
1065                         .amux     = 0,
1066                 }, {
1067                         .type     = EM28XX_VMUX_COMPOSITE1,
1068                         .vmux     = TVP5150_COMPOSITE1,
1069                         .amux     = 1,
1070                 }, {
1071                         .type     = EM28XX_VMUX_SVIDEO,
1072                         .vmux     = TVP5150_SVIDEO,
1073                         .amux     = 1,
1074                 } },
1075         },
1076         [EM2882_BOARD_TERRATEC_HYBRID_XS] = {
1077                 .name         = "Terratec Hybrid XS (em2882)",
1078                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
1079                 .vchannels    = 3,
1080                 .tuner_type   = TUNER_XC2028,
1081                 .decoder      = EM28XX_TVP5150,
1082                 .input          = { {
1083                         .type     = EM28XX_VMUX_TELEVISION,
1084                         .vmux     = TVP5150_COMPOSITE0,
1085                         .amux     = 0,
1086                 }, {
1087                         .type     = EM28XX_VMUX_COMPOSITE1,
1088                         .vmux     = TVP5150_COMPOSITE1,
1089                         .amux     = 1,
1090                 }, {
1091                         .type     = EM28XX_VMUX_SVIDEO,
1092                         .vmux     = TVP5150_SVIDEO,
1093                         .amux     = 1,
1094                 } },
1095         },
1096         [EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950] = {
1097                 .name         = "Hauppauge WinTV HVR 950",
1098                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
1099                 .vchannels    = 3,
1100                 .tuner_type   = TUNER_XC2028,
1101                 .decoder      = EM28XX_TVP5150,
1102                 .input          = { {
1103                         .type     = EM28XX_VMUX_TELEVISION,
1104                         .vmux     = TVP5150_COMPOSITE0,
1105                         .amux     = 0,
1106                 }, {
1107                         .type     = EM28XX_VMUX_COMPOSITE1,
1108                         .vmux     = TVP5150_COMPOSITE1,
1109                         .amux     = 1,
1110                 }, {
1111                         .type     = EM28XX_VMUX_SVIDEO,
1112                         .vmux     = TVP5150_SVIDEO,
1113                         .amux     = 1,
1114                 } },
1115         },
1116         [EM2883_BOARD_KWORLD_HYBRID_A316] = {
1117                 .name         = "Kworld PlusTV HD Hybrid 330",
1118                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
1119                 .vchannels    = 3,
1120                 .is_em2800    = 0,
1121                 .tuner_type   = TUNER_XC2028,
1122                 .decoder      = EM28XX_TVP5150,
1123                 .input          = { {
1124                         .type     = EM28XX_VMUX_TELEVISION,
1125                         .vmux     = TVP5150_COMPOSITE0,
1126                         .amux     = 0,
1127                 }, {
1128                         .type     = EM28XX_VMUX_COMPOSITE1,
1129                         .vmux     = TVP5150_COMPOSITE1,
1130                         .amux     = 1,
1131                 }, {
1132                         .type     = EM28XX_VMUX_SVIDEO,
1133                         .vmux     = TVP5150_SVIDEO,
1134                         .amux     = 1,
1135                 } },
1136         },
1137 };
1138 const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards);
1139
1140 /* table of devices that work with this driver */
1141 struct usb_device_id em28xx_id_table [] = {
1142         { USB_DEVICE(0xeb1a, 0x2750),
1143                         .driver_info = EM2750_BOARD_UNKNOWN },
1144         { USB_DEVICE(0xeb1a, 0x2751),
1145                         .driver_info = EM2750_BOARD_UNKNOWN },
1146         { USB_DEVICE(0xeb1a, 0x2800),
1147                         .driver_info = EM2800_BOARD_UNKNOWN },
1148         { USB_DEVICE(0xeb1a, 0x2820),
1149                         .driver_info = EM2820_BOARD_UNKNOWN },
1150         { USB_DEVICE(0xeb1a, 0x2821),
1151                         .driver_info = EM2820_BOARD_UNKNOWN },
1152         { USB_DEVICE(0xeb1a, 0x2860),
1153                         .driver_info = EM2820_BOARD_UNKNOWN },
1154         { USB_DEVICE(0xeb1a, 0x2861),
1155                         .driver_info = EM2820_BOARD_UNKNOWN },
1156         { USB_DEVICE(0xeb1a, 0x2870),
1157                         .driver_info = EM2820_BOARD_UNKNOWN },
1158         { USB_DEVICE(0xeb1a, 0x2881),
1159                         .driver_info = EM2820_BOARD_UNKNOWN },
1160         { USB_DEVICE(0xeb1a, 0x2883),
1161                         .driver_info = EM2820_BOARD_UNKNOWN },
1162         { USB_DEVICE(0xeb1a, 0xe300),
1163                         .driver_info = EM2861_BOARD_KWORLD_PVRTV_300U },
1164         { USB_DEVICE(0xeb1a, 0xe305),
1165                         .driver_info = EM2880_BOARD_KWORLD_DVB_305U },
1166         { USB_DEVICE(0xeb1a, 0xe310),
1167                         .driver_info = EM2880_BOARD_MSI_DIGIVOX_AD },
1168         { USB_DEVICE(0xeb1a, 0xa316),
1169                         .driver_info = EM2883_BOARD_KWORLD_HYBRID_A316 },
1170         { USB_DEVICE(0xeb1a, 0xe320),
1171                         .driver_info = EM2880_BOARD_MSI_DIGIVOX_AD_II },
1172         { USB_DEVICE(0xeb1a, 0xe323),
1173                         .driver_info = EM2882_BOARD_KWORLD_VS_DVBT },
1174         { USB_DEVICE(0xeb1a, 0xe350),
1175                         .driver_info = EM2870_BOARD_KWORLD_350U },
1176         { USB_DEVICE(0xeb1a, 0xe355),
1177                         .driver_info = EM2870_BOARD_KWORLD_355U },
1178         { USB_DEVICE(0xeb1a, 0x2801),
1179                         .driver_info = EM2800_BOARD_GRABBEEX_USB2800 },
1180         { USB_DEVICE(0xeb1a, 0xe357),
1181                         .driver_info = EM2870_BOARD_KWORLD_355U },
1182         { USB_DEVICE(0x0ccd, 0x0036),
1183                         .driver_info = EM2820_BOARD_TERRATEC_CINERGY_250 },
1184         { USB_DEVICE(0x0ccd, 0x004c),
1185                         .driver_info = EM2880_BOARD_TERRATEC_HYBRID_XS_FR },
1186         { USB_DEVICE(0x0ccd, 0x004f),
1187                         .driver_info = EM2860_BOARD_TERRATEC_HYBRID_XS },
1188         { USB_DEVICE(0x0ccd, 0x005e),
1189                         .driver_info = EM2882_BOARD_TERRATEC_HYBRID_XS },
1190         { USB_DEVICE(0x0ccd, 0x0042),
1191                         .driver_info = EM2880_BOARD_TERRATEC_HYBRID_XS },
1192         { USB_DEVICE(0x0ccd, 0x0043),
1193                         .driver_info = EM2870_BOARD_TERRATEC_XS },
1194         { USB_DEVICE(0x0ccd, 0x0047),
1195                         .driver_info = EM2880_BOARD_TERRATEC_PRODIGY_XS },
1196         { USB_DEVICE(0x185b, 0x2870),
1197                         .driver_info = EM2870_BOARD_COMPRO_VIDEOMATE },
1198         { USB_DEVICE(0x2040, 0x4200),
1199                         .driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 },
1200         { USB_DEVICE(0x2040, 0x4201),
1201                         .driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 },
1202         { USB_DEVICE(0x2040, 0x6500),
1203                         .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900 },
1204         { USB_DEVICE(0x2040, 0x6502),
1205                         .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2 },
1206         { USB_DEVICE(0x2040, 0x6513), /* HCW HVR-980 */
1207                         .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_950 },
1208         { USB_DEVICE(0x2040, 0x6517), /* HP  HVR-950 */
1209                         .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_950 },
1210         { USB_DEVICE(0x2040, 0x651b), /* RP  HVR-950 */
1211                         .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_950 },
1212         { USB_DEVICE(0x2040, 0x651f), /* HCW HVR-850 */
1213                         .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_950 },
1214         { USB_DEVICE(0x0438, 0xb002),
1215                         .driver_info = EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600 },
1216         { USB_DEVICE(0x2001, 0xf112),
1217                         .driver_info = EM2820_BOARD_DLINK_USB_TV },
1218         { USB_DEVICE(0x2304, 0x0207),
1219                         .driver_info = EM2820_BOARD_PINNACLE_DVC_90 },
1220         { USB_DEVICE(0x2304, 0x0208),
1221                         .driver_info = EM2820_BOARD_PINNACLE_USB_2 },
1222         { USB_DEVICE(0x2304, 0x021a),
1223                         .driver_info = EM2820_BOARD_PINNACLE_DVC_90 },
1224         { USB_DEVICE(0x2304, 0x0226),
1225                         .driver_info = EM2882_BOARD_PINNACLE_HYBRID_PRO },
1226         { USB_DEVICE(0x2304, 0x0227),
1227                         .driver_info = EM2880_BOARD_PINNACLE_PCTV_HD_PRO },
1228         { USB_DEVICE(0x0413, 0x6023),
1229                         .driver_info = EM2800_BOARD_LEADTEK_WINFAST_USBII },
1230         { USB_DEVICE(0x093b, 0xa005),
1231                         .driver_info = EM2861_BOARD_PLEXTOR_PX_TV100U },
1232         { },
1233 };
1234 MODULE_DEVICE_TABLE(usb, em28xx_id_table);
1235
1236 /*
1237  *  Reset sequences for analog/digital modes
1238  */
1239
1240 /* Reset for the most [analog] boards */
1241 static struct em28xx_reg_seq default_analog[] = {
1242         {EM28XX_R08_GPIO,       0x6d,   ~EM_GPIO_4,     10},
1243         {       -1,             -1,     -1,             -1},
1244 };
1245
1246 /* Reset for the most [digital] boards */
1247 static struct em28xx_reg_seq default_digital[] = {
1248         {EM28XX_R08_GPIO,       0x6e,   ~EM_GPIO_4,     10},
1249         {       -1,             -1,     -1,             -1},
1250 };
1251
1252 /* Board Hauppauge WinTV HVR 900 analog */
1253 static struct em28xx_reg_seq hauppauge_wintv_hvr_900_analog[] = {
1254         {EM28XX_R08_GPIO,       0x2d,   ~EM_GPIO_4,     10},
1255         {0x05,                  0xff,   0x10,           10},
1256         {  -1,                  -1,     -1,             -1},
1257 };
1258
1259 /* Board Hauppauge WinTV HVR 900 digital */
1260 static struct em28xx_reg_seq hauppauge_wintv_hvr_900_digital[] = {
1261         {EM28XX_R08_GPIO,       0x2e,   ~EM_GPIO_4,     10},
1262         {EM2880_R04_GPO,        0x04,   0x0f,           10},
1263         {EM2880_R04_GPO,        0x0c,   0x0f,           10},
1264         { -1,                   -1,     -1,             -1},
1265 };
1266
1267 /* Boards - EM2880 MSI DIGIVOX AD and EM2880_BOARD_MSI_DIGIVOX_AD_II */
1268 static struct em28xx_reg_seq em2880_msi_digivox_ad_analog[] = {
1269         {EM28XX_R08_GPIO,       0x69,   ~EM_GPIO_4,      10},
1270         {       -1,             -1,     -1,              -1},
1271 };
1272
1273 /* Boards - EM2880 MSI DIGIVOX AD and EM2880_BOARD_MSI_DIGIVOX_AD_II */
1274 static struct em28xx_reg_seq em2880_msi_digivox_ad_digital[] = {
1275         {EM28XX_R08_GPIO,       0x6a,   ~EM_GPIO_4,     10},
1276         {       -1,             -1,     -1,             -1},
1277 };
1278
1279 /* Board  - EM2870 Kworld 355u
1280    Analog - No input analog */
1281 static struct em28xx_reg_seq em2870_kworld_355u_digital[] = {
1282         {EM2880_R04_GPO,        0x01,   0xff,           10},
1283         {  -1,                  -1,     -1,             -1},
1284 };
1285
1286 /* Callback for the most boards */
1287 static struct em28xx_reg_seq default_callback[] = {
1288         {EM28XX_R08_GPIO,       EM_GPIO_4,      EM_GPIO_4,      10},
1289         {EM28XX_R08_GPIO,       0,              EM_GPIO_4,      10},
1290         {EM28XX_R08_GPIO,       EM_GPIO_4,      EM_GPIO_4,      10},
1291         {  -1,                  -1,             -1,             -1},
1292 };
1293
1294 /* Callback for EM2882 TERRATEC HYBRID XS */
1295 static struct em28xx_reg_seq em2882_terratec_hybrid_xs_digital[] = {
1296         {EM28XX_R08_GPIO,       0x2e,   0xff,              6},
1297         {EM28XX_R08_GPIO,       0x3e,   ~EM_GPIO_4,        6},
1298         {EM2880_R04_GPO,        0x04,   0xff,             10},
1299         {EM2880_R04_GPO,        0x0c,   0xff,             10},
1300         {  -1,                  -1,     -1,               -1},
1301 };
1302
1303 /*
1304  * EEPROM hash table for devices with generic USB IDs
1305  */
1306 static struct em28xx_hash_table em28xx_eeprom_hash [] = {
1307         /* P/N: SA 60002070465 Tuner: TVF7533-MF */
1308         {0x6ce05a8f, EM2820_BOARD_PROLINK_PLAYTV_USB2, TUNER_YMEC_TVF_5533MF},
1309 };
1310
1311 /* I2C devicelist hash table for devices with generic USB IDs */
1312 static struct em28xx_hash_table em28xx_i2c_hash[] = {
1313         {0xb06a32c3, EM2800_BOARD_TERRATEC_CINERGY_200, TUNER_LG_PAL_NEW_TAPC},
1314         {0xf51200e3, EM2800_BOARD_VGEAR_POCKETTV, TUNER_LG_PAL_NEW_TAPC},
1315         {0x1ba50080, EM2860_BOARD_POINTNIX_INTRAORAL_CAMERA, TUNER_ABSENT},
1316 };
1317
1318 int em28xx_tuner_callback(void *ptr, int command, int arg)
1319 {
1320         int rc = 0;
1321         struct em28xx *dev = ptr;
1322
1323         if (dev->tuner_type != TUNER_XC2028)
1324                 return 0;
1325
1326         if (command != XC2028_TUNER_RESET)
1327                 return 0;
1328
1329         if (dev->mode == EM28XX_ANALOG_MODE)
1330                 rc = em28xx_gpio_set(dev, dev->tun_analog_gpio);
1331         else
1332                 rc = em28xx_gpio_set(dev, dev->tun_digital_gpio);
1333
1334         return rc;
1335 }
1336 EXPORT_SYMBOL_GPL(em28xx_tuner_callback);
1337
1338 static void em28xx_set_model(struct em28xx *dev)
1339 {
1340         dev->is_em2800 = em28xx_boards[dev->model].is_em2800;
1341         dev->has_msp34xx = em28xx_boards[dev->model].has_msp34xx;
1342         dev->tda9887_conf = em28xx_boards[dev->model].tda9887_conf;
1343         dev->decoder = em28xx_boards[dev->model].decoder;
1344         dev->video_inputs = em28xx_boards[dev->model].vchannels;
1345         dev->has_12mhz_i2s = em28xx_boards[dev->model].has_12mhz_i2s;
1346         dev->max_range_640_480 = em28xx_boards[dev->model].max_range_640_480;
1347         dev->has_dvb = em28xx_boards[dev->model].has_dvb;
1348         dev->has_snapshot_button = em28xx_boards[dev->model].has_snapshot_button;
1349         dev->valid = em28xx_boards[dev->model].valid;
1350 }
1351
1352 /* Since em28xx_pre_card_setup() requires a proper dev->model,
1353  * this won't work for boards with generic PCI IDs
1354  */
1355 void em28xx_pre_card_setup(struct em28xx *dev)
1356 {
1357         int rc;
1358
1359         rc = em28xx_read_reg(dev, EM2880_R04_GPO);
1360         if (rc >= 0)
1361                 dev->reg_gpo = rc;
1362
1363         dev->wait_after_write = 5;
1364         rc = em28xx_read_reg(dev, EM28XX_R0A_CHIPID);
1365         if (rc > 0) {
1366                 switch (rc) {
1367                 case CHIP_ID_EM2860:
1368                         em28xx_info("chip ID is em2860\n");
1369                         break;
1370                 case CHIP_ID_EM2883:
1371                         em28xx_info("chip ID is em2882/em2883\n");
1372                         dev->wait_after_write = 0;
1373                         break;
1374                 default:
1375                         em28xx_info("em28xx chip ID = %d\n", rc);
1376                 }
1377         }
1378         em28xx_set_model(dev);
1379
1380         /* request some modules */
1381         switch (dev->model) {
1382         case EM2880_BOARD_TERRATEC_PRODIGY_XS:
1383         case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
1384         case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2:
1385         case EM2860_BOARD_TERRATEC_HYBRID_XS:
1386         case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_950:
1387         case EM2880_BOARD_PINNACLE_PCTV_HD_PRO:
1388         case EM2882_BOARD_PINNACLE_HYBRID_PRO:
1389         case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950:
1390         case EM2883_BOARD_KWORLD_HYBRID_A316:
1391         case EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600:
1392                 em28xx_write_regs(dev, EM28XX_R0F_XCLK,    "\x27", 1);
1393                 em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
1394                 msleep(50);
1395
1396                 /* Sets GPO/GPIO sequences for this device */
1397                 dev->analog_gpio      = hauppauge_wintv_hvr_900_analog;
1398                 dev->digital_gpio     = hauppauge_wintv_hvr_900_digital;
1399                 dev->tun_analog_gpio  = default_callback;
1400                 dev->tun_digital_gpio = default_callback;
1401                 break;
1402
1403         case EM2882_BOARD_TERRATEC_HYBRID_XS:
1404                 em28xx_write_regs(dev, EM28XX_R0F_XCLK,    "\x27", 1);
1405                 em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
1406                 msleep(50);
1407
1408                 /* should be added ir_codes here */
1409
1410                 /* Sets GPO/GPIO sequences for this device */
1411                 dev->analog_gpio      = hauppauge_wintv_hvr_900_analog;
1412                 dev->digital_gpio     = hauppauge_wintv_hvr_900_digital;
1413                 dev->tun_analog_gpio  = default_callback;
1414                 dev->tun_digital_gpio = em2882_terratec_hybrid_xs_digital;
1415                 break;
1416
1417         case EM2880_BOARD_TERRATEC_HYBRID_XS_FR:
1418         case EM2880_BOARD_TERRATEC_HYBRID_XS:
1419         case EM2870_BOARD_TERRATEC_XS:
1420         case EM2881_BOARD_PINNACLE_HYBRID_PRO:
1421         case EM2880_BOARD_KWORLD_DVB_310U:
1422         case EM2870_BOARD_KWORLD_350U:
1423         case EM2881_BOARD_DNT_DA2_HYBRID:
1424                 em28xx_write_regs(dev, EM28XX_R0F_XCLK,    "\x27", 1);
1425                 em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
1426                 msleep(50);
1427
1428                 /* NOTE: EM2881_DNT_DA2_HYBRID spend 140 msleep for digital
1429                          and analog commands. If this commands doesn't work,
1430                          add this timer. */
1431
1432                 /* Sets GPO/GPIO sequences for this device */
1433                 dev->analog_gpio      = default_analog;
1434                 dev->digital_gpio     = default_digital;
1435                 dev->tun_analog_gpio  = default_callback;
1436                 dev->tun_digital_gpio = default_callback;
1437                 break;
1438
1439         case EM2880_BOARD_MSI_DIGIVOX_AD:
1440         case EM2880_BOARD_MSI_DIGIVOX_AD_II:
1441                 em28xx_write_regs(dev, EM28XX_R0F_XCLK,    "\x27", 1);
1442                 em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
1443                 msleep(50);
1444
1445                 /* Sets GPO/GPIO sequences for this device */
1446                 dev->analog_gpio      = em2880_msi_digivox_ad_analog;
1447                 dev->digital_gpio     = em2880_msi_digivox_ad_digital;
1448                 dev->tun_analog_gpio  = default_callback;
1449                 dev->tun_digital_gpio = default_callback;
1450                 break;
1451
1452         case EM2750_BOARD_UNKNOWN:
1453         case EM2750_BOARD_DLCW_130:
1454                 em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x0a", 1);
1455                 break;
1456
1457         case EM2861_BOARD_PLEXTOR_PX_TV100U:
1458                 em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x27", 1);
1459                 em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
1460                 /* FIXME guess */
1461                 /* Turn on analog audio output */
1462                 em28xx_write_regs_req(dev, 0x00, 0x08, "\xfd", 1);
1463                 break;
1464
1465         case EM2861_BOARD_KWORLD_PVRTV_300U:
1466         case EM2880_BOARD_KWORLD_DVB_305U:
1467                 em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x27", 1);
1468                 em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x4c", 1);
1469                 msleep(10);
1470                 em28xx_write_regs(dev, 0x08, "\x6d", 1);
1471                 msleep(10);
1472                 em28xx_write_regs(dev, 0x08, "\x7d", 1);
1473                 msleep(10);
1474                 break;
1475
1476         case EM2870_BOARD_KWORLD_355U:
1477                 em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x27", 1);
1478                 em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
1479                 msleep(50);
1480
1481                 /* Sets GPO/GPIO sequences for this device */
1482                 dev->digital_gpio     = em2870_kworld_355u_digital;
1483                 break;
1484
1485         case EM2870_BOARD_COMPRO_VIDEOMATE:
1486                 em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x27", 1);
1487                 em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
1488                 /* TODO: someone can do some cleanup here...
1489                          not everything's needed */
1490                 em28xx_write_regs(dev, 0x04, "\x00", 1);
1491                 msleep(10);
1492                 em28xx_write_regs(dev, 0x04, "\x01", 1);
1493                 msleep(10);
1494                 em28xx_write_regs(dev, 0x08, "\xfd", 1);
1495                 mdelay(70);
1496                 em28xx_write_regs(dev, 0x08, "\xfc", 1);
1497                 mdelay(70);
1498                 em28xx_write_regs(dev, 0x08, "\xdc", 1);
1499                 mdelay(70);
1500                 em28xx_write_regs(dev, 0x08, "\xfc", 1);
1501                 mdelay(70);
1502                 break;
1503
1504         case EM2870_BOARD_TERRATEC_XS_MT2060:
1505                 em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x27", 1);
1506                 em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
1507                 /* this device needs some gpio writes to get the DVB-T
1508                    demod work */
1509                 em28xx_write_regs(dev, 0x08, "\xfe", 1);
1510                 mdelay(70);
1511                 em28xx_write_regs(dev, 0x08, "\xde", 1);
1512                 mdelay(70);
1513                 dev->em28xx_write_regs(dev, 0x08, "\xfe", 1);
1514                 mdelay(70);
1515                 break;
1516
1517         case EM2870_BOARD_PINNACLE_PCTV_DVB:
1518                 em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
1519                 /* this device needs some gpio writes to get the
1520                    DVB-T demod work */
1521                 em28xx_write_regs(dev, 0x08, "\xfe", 1);
1522                 mdelay(70);
1523                 em28xx_write_regs(dev, 0x08, "\xde", 1);
1524                 mdelay(70);
1525                 em28xx_write_regs(dev, 0x08, "\xfe", 1);
1526                 mdelay(70);
1527                 /* switch em2880 rc protocol */
1528                 em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x22", 1);
1529                 /* should be added ir_codes here */
1530                 break;
1531
1532         case EM2820_BOARD_GADMEI_UTV310:
1533                 em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x27", 1);
1534                 em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
1535                 /* Turn on analog audio output */
1536                 em28xx_write_regs_req(dev, 0x00, 0x08, "\xfd", 1);
1537                 break;
1538
1539         case EM2860_BOARD_GADMEI_UTV330:
1540                 /* Turn on IR */
1541                 em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x07", 1);
1542                 em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
1543                 /* should be added ir_codes here */
1544                 break;
1545
1546         case EM2820_BOARD_MSI_VOX_USB_2:
1547                 em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x27", 1);
1548                 em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
1549                 /* enables audio for that device */
1550                 em28xx_write_regs_req(dev, 0x00, 0x08, "\xfd", 1);
1551                 break;
1552         }
1553
1554         em28xx_gpio_set(dev, dev->tun_analog_gpio);
1555         em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
1556
1557         /* Unlock device */
1558         em28xx_set_mode(dev, EM28XX_MODE_UNDEFINED);
1559 }
1560
1561 static void em28xx_setup_xc3028(struct em28xx *dev, struct xc2028_ctrl *ctl)
1562 {
1563         memset(ctl, 0, sizeof(*ctl));
1564
1565         ctl->fname   = XC2028_DEFAULT_FIRMWARE;
1566         ctl->max_len = 64;
1567         ctl->mts = em28xx_boards[dev->model].mts_firmware;
1568
1569         switch (dev->model) {
1570         case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
1571                 ctl->demod = XC3028_FE_ZARLINK456;
1572                 break;
1573         case EM2880_BOARD_TERRATEC_HYBRID_XS:
1574                 ctl->demod = XC3028_FE_ZARLINK456;
1575                 break;
1576         case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2:
1577                 /* djh - Not sure which demod we need here */
1578                 ctl->demod = XC3028_FE_DEFAULT;
1579                 break;
1580         case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_950:
1581         case EM2880_BOARD_PINNACLE_PCTV_HD_PRO:
1582         case EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600:
1583                 /* FIXME: Better to specify the needed IF */
1584                 ctl->demod = XC3028_FE_DEFAULT;
1585                 break;
1586         default:
1587                 ctl->demod = XC3028_FE_OREN538;
1588         }
1589 }
1590
1591 static void em28xx_config_tuner(struct em28xx *dev)
1592 {
1593         struct v4l2_priv_tun_config  xc2028_cfg;
1594         struct tuner_setup           tun_setup;
1595         struct v4l2_frequency        f;
1596
1597         if (dev->tuner_type == TUNER_ABSENT)
1598                 return;
1599
1600         tun_setup.mode_mask = T_ANALOG_TV | T_RADIO;
1601         tun_setup.type = dev->tuner_type;
1602         tun_setup.addr = dev->tuner_addr;
1603         tun_setup.tuner_callback = em28xx_tuner_callback;
1604
1605         em28xx_i2c_call_clients(dev, TUNER_SET_TYPE_ADDR, &tun_setup);
1606
1607         if (dev->tuner_type == TUNER_XC2028) {
1608                 struct xc2028_ctrl           ctl;
1609
1610                 em28xx_setup_xc3028(dev, &ctl);
1611
1612                 xc2028_cfg.tuner = TUNER_XC2028;
1613                 xc2028_cfg.priv  = &ctl;
1614
1615                 em28xx_i2c_call_clients(dev, TUNER_SET_CONFIG, &xc2028_cfg);
1616         }
1617
1618         /* configure tuner */
1619         f.tuner = 0;
1620         f.type = V4L2_TUNER_ANALOG_TV;
1621         f.frequency = 9076;     /* just a magic number */
1622         dev->ctl_freq = f.frequency;
1623         em28xx_i2c_call_clients(dev, VIDIOC_S_FREQUENCY, &f);
1624 }
1625
1626 static int em28xx_hint_board(struct em28xx *dev)
1627 {
1628         int i;
1629
1630         /* HINT method: EEPROM
1631          *
1632          * This method works only for boards with eeprom.
1633          * Uses a hash of all eeprom bytes. The hash should be
1634          * unique for a vendor/tuner pair.
1635          * There are a high chance that tuners for different
1636          * video standards produce different hashes.
1637          */
1638         for (i = 0; i < ARRAY_SIZE(em28xx_eeprom_hash); i++) {
1639                 if (dev->hash == em28xx_eeprom_hash[i].hash) {
1640                         dev->model = em28xx_eeprom_hash[i].model;
1641                         dev->tuner_type = em28xx_eeprom_hash[i].tuner;
1642
1643                         em28xx_errdev("Your board has no unique USB ID.\n");
1644                         em28xx_errdev("A hint were successfully done, "
1645                                       "based on eeprom hash.\n");
1646                         em28xx_errdev("This method is not 100%% failproof.\n");
1647                         em28xx_errdev("If the board were missdetected, "
1648                                       "please email this log to:\n");
1649                         em28xx_errdev("\tV4L Mailing List "
1650                                       " <video4linux-list@redhat.com>\n");
1651                         em28xx_errdev("Board detected as %s\n",
1652                                       em28xx_boards[dev->model].name);
1653
1654                         return 0;
1655                 }
1656         }
1657
1658         /* HINT method: I2C attached devices
1659          *
1660          * This method works for all boards.
1661          * Uses a hash of i2c scanned devices.
1662          * Devices with the same i2c attached chips will
1663          * be considered equal.
1664          * This method is less precise than the eeprom one.
1665          */
1666
1667         /* user did not request i2c scanning => do it now */
1668         if (!dev->i2c_hash)
1669                 em28xx_do_i2c_scan(dev);
1670
1671         for (i = 0; i < ARRAY_SIZE(em28xx_i2c_hash); i++) {
1672                 if (dev->i2c_hash == em28xx_i2c_hash[i].hash) {
1673                         dev->model = em28xx_i2c_hash[i].model;
1674                         dev->tuner_type = em28xx_i2c_hash[i].tuner;
1675                         em28xx_errdev("Your board has no unique USB ID.\n");
1676                         em28xx_errdev("A hint were successfully done, "
1677                                       "based on i2c devicelist hash.\n");
1678                         em28xx_errdev("This method is not 100%% failproof.\n");
1679                         em28xx_errdev("If the board were missdetected, "
1680                                       "please email this log to:\n");
1681                         em28xx_errdev("\tV4L Mailing List "
1682                                       " <video4linux-list@redhat.com>\n");
1683                         em28xx_errdev("Board detected as %s\n",
1684                                       em28xx_boards[dev->model].name);
1685
1686                         return 0;
1687                 }
1688         }
1689
1690         em28xx_errdev("Your board has no unique USB ID and thus need a "
1691                       "hint to be detected.\n");
1692         em28xx_errdev("You may try to use card=<n> insmod option to "
1693                       "workaround that.\n");
1694         em28xx_errdev("Please send an email with this log to:\n");
1695         em28xx_errdev("\tV4L Mailing List <video4linux-list@redhat.com>\n");
1696         em28xx_errdev("Board eeprom hash is 0x%08lx\n", dev->hash);
1697         em28xx_errdev("Board i2c devicelist hash is 0x%08lx\n", dev->i2c_hash);
1698
1699         em28xx_errdev("Here is a list of valid choices for the card=<n>"
1700                       " insmod option:\n");
1701         for (i = 0; i < em28xx_bcount; i++) {
1702                 em28xx_errdev("    card=%d -> %s\n",
1703                                 i, em28xx_boards[i].name);
1704         }
1705         return -1;
1706 }
1707
1708 /* ----------------------------------------------------------------------- */
1709 void em28xx_set_ir(struct em28xx *dev, struct IR_i2c *ir)
1710 {
1711         if (disable_ir) {
1712                 ir->get_key = NULL;
1713                 return ;
1714         }
1715
1716         /* detect & configure */
1717         switch (dev->model) {
1718         case (EM2800_BOARD_UNKNOWN):
1719                 break;
1720         case (EM2820_BOARD_UNKNOWN):
1721                 break;
1722         case (EM2800_BOARD_TERRATEC_CINERGY_200):
1723         case (EM2820_BOARD_TERRATEC_CINERGY_250):
1724                 ir->ir_codes = ir_codes_em_terratec;
1725                 ir->get_key = em28xx_get_key_terratec;
1726                 snprintf(ir->c.name, sizeof(ir->c.name),
1727                          "i2c IR (EM28XX Terratec)");
1728                 break;
1729         case (EM2820_BOARD_PINNACLE_USB_2):
1730                 ir->ir_codes = ir_codes_pinnacle_grey;
1731                 ir->get_key = em28xx_get_key_pinnacle_usb_grey;
1732                 snprintf(ir->c.name, sizeof(ir->c.name),
1733                          "i2c IR (EM28XX Pinnacle PCTV)");
1734                 break;
1735         case (EM2820_BOARD_HAUPPAUGE_WINTV_USB_2):
1736                 ir->ir_codes = ir_codes_hauppauge_new;
1737                 ir->get_key = em28xx_get_key_em_haup;
1738                 snprintf(ir->c.name, sizeof(ir->c.name),
1739                          "i2c IR (EM2840 Hauppauge)");
1740                 break;
1741         case (EM2820_BOARD_MSI_VOX_USB_2):
1742                 break;
1743         case (EM2800_BOARD_LEADTEK_WINFAST_USBII):
1744                 break;
1745         case (EM2800_BOARD_KWORLD_USB2800):
1746                 break;
1747         case (EM2800_BOARD_GRABBEEX_USB2800):
1748                 break;
1749         }
1750 }
1751
1752 void em28xx_card_setup(struct em28xx *dev)
1753 {
1754         em28xx_set_model(dev);
1755
1756         dev->tuner_type = em28xx_boards[dev->model].tuner_type;
1757
1758         /* request some modules */
1759         switch (dev->model) {
1760         case EM2820_BOARD_HAUPPAUGE_WINTV_USB_2:
1761         case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
1762         case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2:
1763         case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_950:
1764         {
1765                 struct tveeprom tv;
1766 #ifdef CONFIG_MODULES
1767                 request_module("tveeprom");
1768 #endif
1769                 /* Call first TVeeprom */
1770
1771                 dev->i2c_client.addr = 0xa0 >> 1;
1772                 tveeprom_hauppauge_analog(&dev->i2c_client, &tv, dev->eedata);
1773
1774                 dev->tuner_type = tv.tuner_type;
1775
1776                 if (tv.audio_processor == V4L2_IDENT_MSPX4XX) {
1777                         dev->i2s_speed = 2048000;
1778                         dev->has_msp34xx = 1;
1779                 }
1780 #ifdef CONFIG_MODULES
1781                 if (tv.has_ir)
1782                         request_module("ir-kbd-i2c");
1783 #endif
1784                 break;
1785         }
1786         case EM2820_BOARD_KWORLD_PVRTV2800RF:
1787                 /* GPIO enables sound on KWORLD PVR TV 2800RF */
1788                 em28xx_write_regs_req(dev, 0x00, 0x08, "\xf9", 1);
1789                 break;
1790         case EM2820_BOARD_UNKNOWN:
1791         case EM2800_BOARD_UNKNOWN:
1792                 if (!em28xx_hint_board(dev))
1793                         em28xx_set_model(dev);
1794                 break;
1795         }
1796
1797         if (dev->has_snapshot_button)
1798                 em28xx_register_snapshot_button(dev);
1799
1800         if (dev->valid == EM28XX_BOARD_NOT_VALIDATED) {
1801                 em28xx_errdev("\n\n");
1802                 em28xx_errdev("The support for this board weren't "
1803                               "valid yet.\n");
1804                 em28xx_errdev("Please send a report of having this working\n");
1805                 em28xx_errdev("not to V4L mailing list (and/or to other "
1806                                 "addresses)\n\n");
1807         }
1808
1809         /* Allow override tuner type by a module parameter */
1810         if (tuner >= 0)
1811                 dev->tuner_type = tuner;
1812
1813 #ifdef CONFIG_MODULES
1814         /* request some modules */
1815         if (dev->has_msp34xx)
1816                 request_module("msp3400");
1817         if (dev->decoder == EM28XX_SAA7113 || dev->decoder == EM28XX_SAA7114)
1818                 request_module("saa7115");
1819         if (dev->decoder == EM28XX_TVP5150)
1820                 request_module("tvp5150");
1821         if (dev->tuner_type != TUNER_ABSENT)
1822                 request_module("tuner");
1823 #endif
1824
1825         em28xx_config_tuner(dev);
1826 }