drivers/media/video/em28xx/em28xx-cards.c

   1 /*
   2    em28xx-cards.c - driver for Empia EM2800/EM2820/2840 USB
   3                     video capture devices
   4
   5    Copyright (C) 2005 Ludovico Cavedon <cavedon@sssup.it>
   6                       Markus Rechberger <mrechberger@gmail.com>
   7                       Mauro Carvalho Chehab <mchehab@infradead.org>
   8                       Sascha Sommer <saschasommer@freenet.de>
   9
  10    This program is free software; you can redistribute it and/or modify
  11    it under the terms of the GNU General Public License as published by
  12    the Free Software Foundation; either version 2 of the License, or
  13    (at your option) any later version.
  14
  15    This program is distributed in the hope that it will be useful,
  16    but WITHOUT ANY WARRANTY; without even the implied warranty of
  17    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  18    GNU General Public License for more details.
  19
  20    You should have received a copy of the GNU General Public License
  21    along with this program; if not, write to the Free Software
  22    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  23  */
  24
  25 #include <linux/init.h>
  26 #include <linux/module.h>
  27 #include <linux/delay.h>
  28 #include <linux/i2c.h>
  29 #include <linux/usb.h>
  30 #include <media/tuner.h>
  31 #include <media/msp3400.h>
  32 #include <media/saa7115.h>
  33 #include <media/tvp5150.h>
  34 #include <media/tvaudio.h>
  35 #include <media/i2c-addr.h>
  36 #include <media/tveeprom.h>
  37 #include <media/v4l2-common.h>
  38 #include <media/v4l2-chip-ident.h>
  39
  40 #include "em28xx.h"
  41
  42 #define DRIVER_NAME         "em28xx"
  43
  44 static int tuner = -1;
  45 module_param(tuner, int, 0444);
  46 MODULE_PARM_DESC(tuner, "tuner type");
  47
  48 static unsigned int disable_ir;
  49 module_param(disable_ir, int, 0444);
  50 MODULE_PARM_DESC(disable_ir, "disable infrared remote support");
  51
  52 static unsigned int card[]     = {[0 ... (EM28XX_MAXBOARDS - 1)] = UNSET };
  53 module_param_array(card,  int, NULL, 0444);
  54 MODULE_PARM_DESC(card,     "card type");
  55
  56 /* Bitmask marking allocated devices from 0 to EM28XX_MAXBOARDS */
  57 static unsigned long em28xx_devused;
  58
  59 struct em28xx_hash_table {
  60         unsigned long hash;
  61         unsigned int  model;
  62         unsigned int  tuner;
  63 };
  64
  65 /*
  66  *  Reset sequences for analog/digital modes
  67  */
  68
  69 /* Reset for the most [analog] boards */
  70 static struct em28xx_reg_seq default_analog[] = {
  71         {EM28XX_R08_GPIO,       0x6d,   ~EM_GPIO_4,     10},
  72         {       -1,             -1,     -1,             -1},
  73 };
  74
  75 /* Reset for the most [digital] boards */
  76 static struct em28xx_reg_seq default_digital[] = {
  77         {EM28XX_R08_GPIO,       0x6e,   ~EM_GPIO_4,     10},
  78         {       -1,             -1,     -1,             -1},
  79 };
  80
  81 /* Board Hauppauge WinTV HVR 900 analog */
  82 static struct em28xx_reg_seq hauppauge_wintv_hvr_900_analog[] = {
  83         {EM28XX_R08_GPIO,       0x2d,   ~EM_GPIO_4,     10},
  84         {0x05,                  0xff,   0x10,           10},
  85         {  -1,                  -1,     -1,             -1},
  86 };
  87
  88 /* Board Hauppauge WinTV HVR 900 digital */
  89 static struct em28xx_reg_seq hauppauge_wintv_hvr_900_digital[] = {
  90         {EM28XX_R08_GPIO,       0x2e,   ~EM_GPIO_4,     10},
  91         {EM2880_R04_GPO,        0x04,   0x0f,           10},
  92         {EM2880_R04_GPO,        0x0c,   0x0f,           10},
  93         { -1,                   -1,     -1,             -1},
  94 };
  95
  96 /* Boards - EM2880 MSI DIGIVOX AD and EM2880_BOARD_MSI_DIGIVOX_AD_II */
  97 static struct em28xx_reg_seq em2880_msi_digivox_ad_analog[] = {
  98         {EM28XX_R08_GPIO,       0x69,   ~EM_GPIO_4,      10},
  99         {       -1,             -1,     -1,              -1},
 100 };
 101
 102 /* Boards - EM2880 MSI DIGIVOX AD and EM2880_BOARD_MSI_DIGIVOX_AD_II */
 103
 104 /* Board  - EM2870 Kworld 355u
 105    Analog - No input analog */
 106
 107 static struct em28xx_reg_seq kworld_330u_analog[] = {
 108         {EM28XX_R08_GPIO,       0x6d,   ~EM_GPIO_4,     10},
 109         {EM2880_R04_GPO,        0x00,   0xff,           10},
 110         { -1,                   -1,     -1,             -1},
 111 };
 112
 113 static struct em28xx_reg_seq kworld_330u_digital[] = {
 114         {EM28XX_R08_GPIO,       0x6e,   ~EM_GPIO_4,     10},
 115         {EM2880_R04_GPO,        0x08,   0xff,           10},
 116         { -1,                   -1,     -1,             -1},
 117 };
 118
 119 /* Callback for the most boards */
 120 static struct em28xx_reg_seq default_tuner_gpio[] = {
 121         {EM28XX_R08_GPIO,       EM_GPIO_4,      EM_GPIO_4,      10},
 122         {EM28XX_R08_GPIO,       0,              EM_GPIO_4,      10},
 123         {EM28XX_R08_GPIO,       EM_GPIO_4,      EM_GPIO_4,      10},
 124         {  -1,                  -1,             -1,             -1},
 125 };
 126
 127 /* Mute/unmute */
 128 static struct em28xx_reg_seq compro_unmute_tv_gpio[] = {
 129         {EM28XX_R08_GPIO,       5,              7,              10},
 130         {  -1,                  -1,             -1,             -1},
 131 };
 132
 133 static struct em28xx_reg_seq compro_unmute_svid_gpio[] = {
 134         {EM28XX_R08_GPIO,       4,              7,              10},
 135         {  -1,                  -1,             -1,             -1},
 136 };
 137
 138 static struct em28xx_reg_seq compro_mute_gpio[] = {
 139         {EM28XX_R08_GPIO,       6,              7,              10},
 140         {  -1,                  -1,             -1,             -1},
 141 };
 142
 143 /*
 144  *  Board definitions
 145  */
 146 struct em28xx_board em28xx_boards[] = {
 147         [EM2750_BOARD_UNKNOWN] = {
 148                 .name          = "Unknown EM2750/EM2751 webcam grabber",
 149                 .xclk          = EM28XX_XCLK_FREQUENCY_48MHZ,
 150                 .tuner_type    = TUNER_ABSENT,  /* This is a webcam */
 151                 .input         = { {
 152                         .type     = EM28XX_VMUX_COMPOSITE1,
 153                         .vmux     = 0,
 154                         .amux     = EM28XX_AMUX_VIDEO,
 155                 } },
 156         },
 157         [EM2800_BOARD_UNKNOWN] = {
 158                 .name         = "Unknown EM2800 video grabber",
 159                 .is_em2800    = 1,
 160                 .tda9887_conf = TDA9887_PRESENT,
 161                 .decoder      = EM28XX_SAA711X,
 162                 .tuner_type   = TUNER_ABSENT,
 163                 .input        = { {
 164                         .type     = EM28XX_VMUX_COMPOSITE1,
 165                         .vmux     = SAA7115_COMPOSITE0,
 166                         .amux     = EM28XX_AMUX_LINE_IN,
 167                 }, {
 168                         .type     = EM28XX_VMUX_SVIDEO,
 169                         .vmux     = SAA7115_SVIDEO3,
 170                         .amux     = EM28XX_AMUX_LINE_IN,
 171                 } },
 172         },
 173         [EM2820_BOARD_UNKNOWN] = {
 174                 .name          = "Unknown EM2750/28xx video grabber",
 175                 .tuner_type    = TUNER_ABSENT,
 176         },
 177         [EM2750_BOARD_DLCW_130] = {
 178                 /* Beijing Huaqi Information Digital Technology Co., Ltd */
 179                 .name          = "Huaqi DLCW-130",
 180                 .valid         = EM28XX_BOARD_NOT_VALIDATED,
 181                 .xclk          = EM28XX_XCLK_FREQUENCY_48MHZ,
 182                 .tuner_type    = TUNER_ABSENT,  /* This is a webcam */
 183                 .input         = { {
 184                         .type     = EM28XX_VMUX_COMPOSITE1,
 185                         .vmux     = 0,
 186                         .amux     = EM28XX_AMUX_VIDEO,
 187                 } },
 188         },
 189         [EM2820_BOARD_KWORLD_PVRTV2800RF] = {
 190                 .name         = "Kworld PVR TV 2800 RF",
 191                 .tuner_type   = TUNER_TEMIC_PAL,
 192                 .tda9887_conf = TDA9887_PRESENT,
 193                 .decoder      = EM28XX_SAA711X,
 194                 .input        = { {
 195                         .type     = EM28XX_VMUX_COMPOSITE1,
 196                         .vmux     = SAA7115_COMPOSITE0,
 197                         .amux     = EM28XX_AMUX_LINE_IN,
 198                 }, {
 199                         .type     = EM28XX_VMUX_SVIDEO,
 200                         .vmux     = SAA7115_SVIDEO3,
 201                         .amux     = EM28XX_AMUX_LINE_IN,
 202                 } },
 203         },
 204         [EM2820_BOARD_GADMEI_TVR200] = {
 205                 .name         = "Gadmei TVR200",
 206                 .tuner_type   = TUNER_LG_PAL_NEW_TAPC,
 207                 .tda9887_conf = TDA9887_PRESENT,
 208                 .decoder      = EM28XX_SAA711X,
 209                 .input        = { {
 210                         .type     = EM28XX_VMUX_TELEVISION,
 211                         .vmux     = SAA7115_COMPOSITE2,
 212                         .amux     = EM28XX_AMUX_LINE_IN,
 213                 }, {
 214                         .type     = EM28XX_VMUX_COMPOSITE1,
 215                         .vmux     = SAA7115_COMPOSITE0,
 216                         .amux     = EM28XX_AMUX_LINE_IN,
 217                 }, {
 218                         .type     = EM28XX_VMUX_SVIDEO,
 219                         .vmux     = SAA7115_SVIDEO3,
 220                         .amux     = EM28XX_AMUX_LINE_IN,
 221                 } },
 222         },
 223         [EM2820_BOARD_TERRATEC_CINERGY_250] = {
 224                 .name         = "Terratec Cinergy 250 USB",
 225                 .tuner_type   = TUNER_LG_PAL_NEW_TAPC,
 226                 .tda9887_conf = TDA9887_PRESENT,
 227                 .decoder      = EM28XX_SAA711X,
 228                 .input        = { {
 229                         .type     = EM28XX_VMUX_TELEVISION,
 230                         .vmux     = SAA7115_COMPOSITE2,
 231                         .amux     = EM28XX_AMUX_LINE_IN,
 232                 }, {
 233                         .type     = EM28XX_VMUX_COMPOSITE1,
 234                         .vmux     = SAA7115_COMPOSITE0,
 235                         .amux     = EM28XX_AMUX_LINE_IN,
 236                 }, {
 237                         .type     = EM28XX_VMUX_SVIDEO,
 238                         .vmux     = SAA7115_SVIDEO3,
 239                         .amux     = EM28XX_AMUX_LINE_IN,
 240                 } },
 241         },
 242         [EM2820_BOARD_PINNACLE_USB_2] = {
 243                 .name         = "Pinnacle PCTV USB 2",
 244                 .tuner_type   = TUNER_LG_PAL_NEW_TAPC,
 245                 .tda9887_conf = TDA9887_PRESENT,
 246                 .decoder      = EM28XX_SAA711X,
 247                 .input        = { {
 248                         .type     = EM28XX_VMUX_TELEVISION,
 249                         .vmux     = SAA7115_COMPOSITE2,
 250                         .amux     = EM28XX_AMUX_VIDEO,
 251                 }, {
 252                         .type     = EM28XX_VMUX_COMPOSITE1,
 253                         .vmux     = SAA7115_COMPOSITE0,
 254                         .amux     = EM28XX_AMUX_LINE_IN,
 255                 }, {
 256                         .type     = EM28XX_VMUX_SVIDEO,
 257                         .vmux     = SAA7115_SVIDEO3,
 258                         .amux     = EM28XX_AMUX_LINE_IN,
 259                 } },
 260         },
 261         [EM2820_BOARD_HAUPPAUGE_WINTV_USB_2] = {
 262                 .name         = "Hauppauge WinTV USB 2",
 263                 .tuner_type   = TUNER_PHILIPS_FM1236_MK3,
 264                 .tda9887_conf = TDA9887_PRESENT |
 265                                 TDA9887_PORT1_ACTIVE |
 266                                 TDA9887_PORT2_ACTIVE,
 267                 .decoder      = EM28XX_TVP5150,
 268                 .has_msp34xx  = 1,
 269                 .input        = { {
 270                         .type     = EM28XX_VMUX_TELEVISION,
 271                         .vmux     = TVP5150_COMPOSITE0,
 272                         .amux     = MSP_INPUT_DEFAULT,
 273                 }, {
 274                         .type     = EM28XX_VMUX_SVIDEO,
 275                         .vmux     = TVP5150_SVIDEO,
 276                         .amux     = MSP_INPUT(MSP_IN_SCART1, MSP_IN_TUNER1,
 277                                         MSP_DSP_IN_SCART, MSP_DSP_IN_SCART),
 278                 } },
 279         },
 280         [EM2820_BOARD_DLINK_USB_TV] = {
 281                 .name         = "D-Link DUB-T210 TV Tuner",
 282                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 283                 .tuner_type   = TUNER_LG_PAL_NEW_TAPC,
 284                 .tda9887_conf = TDA9887_PRESENT,
 285                 .decoder      = EM28XX_SAA711X,
 286                 .input        = { {
 287                         .type     = EM28XX_VMUX_TELEVISION,
 288                         .vmux     = SAA7115_COMPOSITE2,
 289                         .amux     = EM28XX_AMUX_LINE_IN,
 290                 }, {
 291                         .type     = EM28XX_VMUX_COMPOSITE1,
 292                         .vmux     = SAA7115_COMPOSITE0,
 293                         .amux     = EM28XX_AMUX_LINE_IN,
 294                 }, {
 295                         .type     = EM28XX_VMUX_SVIDEO,
 296                         .vmux     = SAA7115_SVIDEO3,
 297                         .amux     = EM28XX_AMUX_LINE_IN,
 298                 } },
 299         },
 300         [EM2820_BOARD_HERCULES_SMART_TV_USB2] = {
 301                 .name         = "Hercules Smart TV USB 2.0",
 302                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 303                 .tuner_type   = TUNER_LG_PAL_NEW_TAPC,
 304                 .tda9887_conf = TDA9887_PRESENT,
 305                 .decoder      = EM28XX_SAA711X,
 306                 .input        = { {
 307                         .type     = EM28XX_VMUX_TELEVISION,
 308                         .vmux     = SAA7115_COMPOSITE2,
 309                         .amux     = EM28XX_AMUX_LINE_IN,
 310                 }, {
 311                         .type     = EM28XX_VMUX_COMPOSITE1,
 312                         .vmux     = SAA7115_COMPOSITE0,
 313                         .amux     = EM28XX_AMUX_LINE_IN,
 314                 }, {
 315                         .type     = EM28XX_VMUX_SVIDEO,
 316                         .vmux     = SAA7115_SVIDEO3,
 317                         .amux     = EM28XX_AMUX_LINE_IN,
 318                 } },
 319         },
 320         [EM2820_BOARD_PINNACLE_USB_2_FM1216ME] = {
 321                 .name         = "Pinnacle PCTV USB 2 (Philips FM1216ME)",
 322                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 323                 .tuner_type   = TUNER_PHILIPS_FM1216ME_MK3,
 324                 .tda9887_conf = TDA9887_PRESENT,
 325                 .decoder      = EM28XX_SAA711X,
 326                 .input        = { {
 327                         .type     = EM28XX_VMUX_TELEVISION,
 328                         .vmux     = SAA7115_COMPOSITE2,
 329                         .amux     = EM28XX_AMUX_VIDEO,
 330                 }, {
 331                         .type     = EM28XX_VMUX_COMPOSITE1,
 332                         .vmux     = SAA7115_COMPOSITE0,
 333                         .amux     = EM28XX_AMUX_LINE_IN,
 334                 }, {
 335                         .type     = EM28XX_VMUX_SVIDEO,
 336                         .vmux     = SAA7115_SVIDEO3,
 337                         .amux     = EM28XX_AMUX_LINE_IN,
 338                 } },
 339         },
 340         [EM2820_BOARD_GADMEI_UTV310] = {
 341                 .name         = "Gadmei UTV310",
 342                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 343                 .tuner_type   = TUNER_TNF_5335MF,
 344                 .tda9887_conf = TDA9887_PRESENT,
 345                 .decoder      = EM28XX_SAA711X,
 346                 .input        = { {
 347                         .type     = EM28XX_VMUX_TELEVISION,
 348                         .vmux     = SAA7115_COMPOSITE1,
 349                         .amux     = EM28XX_AMUX_LINE_IN,
 350                 }, {
 351                         .type     = EM28XX_VMUX_COMPOSITE1,
 352                         .vmux     = SAA7115_COMPOSITE0,
 353                         .amux     = EM28XX_AMUX_LINE_IN,
 354                 }, {
 355                         .type     = EM28XX_VMUX_SVIDEO,
 356                         .vmux     = SAA7115_SVIDEO3,
 357                         .amux     = EM28XX_AMUX_LINE_IN,
 358                 } },
 359         },
 360         [EM2820_BOARD_LEADTEK_WINFAST_USBII_DELUXE] = {
 361                 .name         = "Leadtek Winfast USB II Deluxe",
 362                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 363                 .tuner_type   = TUNER_PHILIPS_FM1216ME_MK3,
 364                 .tda9887_conf = TDA9887_PRESENT,
 365                 .decoder      = EM28XX_SAA711X,
 366                 .input        = { {
 367                         .type     = EM28XX_VMUX_TELEVISION,
 368                         .vmux     = SAA7115_COMPOSITE2,
 369                         .amux     = EM28XX_AMUX_VIDEO,
 370                 }, {
 371                         .type     = EM28XX_VMUX_COMPOSITE1,
 372                         .vmux     = SAA7115_COMPOSITE0,
 373                         .amux     = EM28XX_AMUX_LINE_IN,
 374                 }, {
 375                         .type     = EM28XX_VMUX_SVIDEO,
 376                         .vmux     = SAA7115_COMPOSITE0,
 377                         .amux     = EM28XX_AMUX_LINE_IN,
 378                 } },
 379         },
 380         [EM2820_BOARD_VIDEOLOGY_20K14XUSB] = {
 381                 .name         = "Videology 20K14XUSB USB2.0",
 382                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 383                 .tuner_type   = TUNER_ABSENT,   /* This is a webcam */
 384                 .input        = { {
 385                         .type     = EM28XX_VMUX_COMPOSITE1,
 386                         .vmux     = 0,
 387                         .amux     = EM28XX_AMUX_VIDEO,
 388                 } },
 389         },
 390         [EM2821_BOARD_SUPERCOMP_USB_2] = {
 391                 .name         = "Supercomp USB 2.0 TV",
 392                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 393                 .tuner_type   = TUNER_PHILIPS_FM1236_MK3,
 394                 .tda9887_conf = TDA9887_PRESENT |
 395                                 TDA9887_PORT1_ACTIVE |
 396                                 TDA9887_PORT2_ACTIVE,
 397                 .decoder      = EM28XX_SAA711X,
 398                 .input        = { {
 399                         .type     = EM28XX_VMUX_TELEVISION,
 400                         .vmux     = SAA7115_COMPOSITE2,
 401                         .amux     = EM28XX_AMUX_LINE_IN,
 402                 }, {
 403                         .type     = EM28XX_VMUX_COMPOSITE1,
 404                         .vmux     = SAA7115_COMPOSITE0,
 405                         .amux     = EM28XX_AMUX_VIDEO,
 406                 }, {
 407                         .type     = EM28XX_VMUX_SVIDEO,
 408                         .vmux     = SAA7115_SVIDEO3,
 409                         .amux     = EM28XX_AMUX_LINE_IN,
 410                 } },
 411         },
 412         [EM2821_BOARD_USBGEAR_VD204] = {
 413                 .name         = "Usbgear VD204v9",
 414                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 415                 .tuner_type   = TUNER_ABSENT,   /* Capture only device */
 416                 .decoder      = EM28XX_SAA711X,
 417                 .input        = { {
 418                         .type  = EM28XX_VMUX_COMPOSITE1,
 419                         .vmux  = SAA7115_COMPOSITE0,
 420                         .amux  = EM28XX_AMUX_LINE_IN,
 421                 }, {
 422                         .type  = EM28XX_VMUX_SVIDEO,
 423                         .vmux  = SAA7115_SVIDEO3,
 424                         .amux  = EM28XX_AMUX_LINE_IN,
 425                 } },
 426         },
 427         [EM2860_BOARD_NETGMBH_CAM] = {
 428                 /* Beijing Huaqi Information Digital Technology Co., Ltd */
 429                 .name         = "NetGMBH Cam",
 430                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 431                 .tuner_type   = TUNER_ABSENT,   /* This is a webcam */
 432                 .input        = { {
 433                         .type     = EM28XX_VMUX_COMPOSITE1,
 434                         .vmux     = 0,
 435                         .amux     = EM28XX_AMUX_VIDEO,
 436                 } },
 437         },
 438         [EM2860_BOARD_TYPHOON_DVD_MAKER] = {
 439                 .name         = "Typhoon DVD Maker",
 440                 .decoder      = EM28XX_SAA711X,
 441                 .tuner_type   = TUNER_ABSENT,   /* Capture only device */
 442                 .input        = { {
 443                         .type  = EM28XX_VMUX_COMPOSITE1,
 444                         .vmux  = SAA7115_COMPOSITE0,
 445                         .amux  = EM28XX_AMUX_LINE_IN,
 446                 }, {
 447                         .type  = EM28XX_VMUX_SVIDEO,
 448                         .vmux  = SAA7115_SVIDEO3,
 449                         .amux  = EM28XX_AMUX_LINE_IN,
 450                 } },
 451         },
 452         [EM2860_BOARD_GADMEI_UTV330] = {
 453                 .name         = "Gadmei UTV330",
 454                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 455                 .tuner_type   = TUNER_TNF_5335MF,
 456                 .tda9887_conf = TDA9887_PRESENT,
 457                 .decoder      = EM28XX_SAA711X,
 458                 .input        = { {
 459                         .type     = EM28XX_VMUX_TELEVISION,
 460                         .vmux     = SAA7115_COMPOSITE2,
 461                         .amux     = EM28XX_AMUX_VIDEO,
 462                 }, {
 463                         .type     = EM28XX_VMUX_COMPOSITE1,
 464                         .vmux     = SAA7115_COMPOSITE0,
 465                         .amux     = EM28XX_AMUX_LINE_IN,
 466                 }, {
 467                         .type     = EM28XX_VMUX_SVIDEO,
 468                         .vmux     = SAA7115_SVIDEO3,
 469                         .amux     = EM28XX_AMUX_LINE_IN,
 470                 } },
 471         },
 472         [EM2860_BOARD_TERRATEC_HYBRID_XS] = {
 473                 .name         = "Terratec Cinergy A Hybrid XS",
 474                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 475                 .tuner_type   = TUNER_XC2028,
 476                 .tuner_gpio   = default_tuner_gpio,
 477                 .decoder      = EM28XX_TVP5150,
 478
 479                 .input        = { {
 480                         .type     = EM28XX_VMUX_TELEVISION,
 481                         .vmux     = TVP5150_COMPOSITE0,
 482                         .amux     = EM28XX_AMUX_VIDEO,
 483                         .gpio     = hauppauge_wintv_hvr_900_analog,
 484                 }, {
 485                         .type     = EM28XX_VMUX_COMPOSITE1,
 486                         .vmux     = TVP5150_COMPOSITE1,
 487                         .amux     = EM28XX_AMUX_LINE_IN,
 488                         .gpio     = hauppauge_wintv_hvr_900_analog,
 489                 }, {
 490                         .type     = EM28XX_VMUX_SVIDEO,
 491                         .vmux     = TVP5150_SVIDEO,
 492                         .amux     = EM28XX_AMUX_LINE_IN,
 493                         .gpio     = hauppauge_wintv_hvr_900_analog,
 494                 } },
 495         },
 496         [EM2861_BOARD_KWORLD_PVRTV_300U] = {
 497                 .name         = "KWorld PVRTV 300U",
 498                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 499                 .tuner_type   = TUNER_XC2028,
 500                 .tuner_gpio   = default_tuner_gpio,
 501                 .decoder      = EM28XX_TVP5150,
 502                 .input        = { {
 503                         .type     = EM28XX_VMUX_TELEVISION,
 504                         .vmux     = TVP5150_COMPOSITE0,
 505                         .amux     = EM28XX_AMUX_VIDEO,
 506                 }, {
 507                         .type     = EM28XX_VMUX_COMPOSITE1,
 508                         .vmux     = TVP5150_COMPOSITE1,
 509                         .amux     = EM28XX_AMUX_LINE_IN,
 510                 }, {
 511                         .type     = EM28XX_VMUX_SVIDEO,
 512                         .vmux     = TVP5150_SVIDEO,
 513                         .amux     = EM28XX_AMUX_LINE_IN,
 514                 } },
 515         },
 516         [EM2861_BOARD_YAKUMO_MOVIE_MIXER] = {
 517                 .name          = "Yakumo MovieMixer",
 518                 .tuner_type    = TUNER_ABSENT,  /* Capture only device */
 519                 .decoder       = EM28XX_TVP5150,
 520                 .input         = { {
 521                         .type     = EM28XX_VMUX_TELEVISION,
 522                         .vmux     = TVP5150_COMPOSITE0,
 523                         .amux     = EM28XX_AMUX_VIDEO,
 524                 }, {
 525                         .type     = EM28XX_VMUX_COMPOSITE1,
 526                         .vmux     = TVP5150_COMPOSITE1,
 527                         .amux     = EM28XX_AMUX_LINE_IN,
 528                 }, {
 529                         .type     = EM28XX_VMUX_SVIDEO,
 530                         .vmux     = TVP5150_SVIDEO,
 531                         .amux     = EM28XX_AMUX_LINE_IN,
 532                 } },
 533         },
 534         [EM2861_BOARD_PLEXTOR_PX_TV100U] = {
 535                 .name         = "Plextor ConvertX PX-TV100U",
 536                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 537                 .tuner_type   = TUNER_TNF_5335MF,
 538                 .tda9887_conf = TDA9887_PRESENT,
 539                 .decoder      = EM28XX_TVP5150,
 540                 .input        = { {
 541                         .type     = EM28XX_VMUX_TELEVISION,
 542                         .vmux     = TVP5150_COMPOSITE0,
 543                         .amux     = EM28XX_AMUX_LINE_IN,
 544                 }, {
 545                         .type     = EM28XX_VMUX_COMPOSITE1,
 546                         .vmux     = TVP5150_COMPOSITE1,
 547                         .amux     = EM28XX_AMUX_LINE_IN,
 548                 }, {
 549                         .type     = EM28XX_VMUX_SVIDEO,
 550                         .vmux     = TVP5150_SVIDEO,
 551                         .amux     = EM28XX_AMUX_LINE_IN,
 552                 } },
 553         },
 554
 555         /* Those boards with em2870 are DVB Only*/
 556
 557         [EM2870_BOARD_TERRATEC_XS] = {
 558                 .name         = "Terratec Cinergy T XS",
 559                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 560                 .tuner_type   = TUNER_XC2028,
 561                 .tuner_gpio   = default_tuner_gpio,
 562         },
 563         [EM2870_BOARD_TERRATEC_XS_MT2060] = {
 564                 .name         = "Terratec Cinergy T XS (MT2060)",
 565                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 566                 .tuner_type   = TUNER_ABSENT, /* MT2060 */
 567         },
 568         [EM2870_BOARD_KWORLD_350U] = {
 569                 .name         = "Kworld 350 U DVB-T",
 570                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 571                 .tuner_type   = TUNER_XC2028,
 572                 .tuner_gpio   = default_tuner_gpio,
 573         },
 574         [EM2870_BOARD_KWORLD_355U] = {
 575                 .name         = "Kworld 355 U DVB-T",
 576                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 577         },
 578         [EM2870_BOARD_PINNACLE_PCTV_DVB] = {
 579                 .name         = "Pinnacle PCTV DVB-T",
 580                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 581                 .tuner_type   = TUNER_ABSENT, /* MT2060 */
 582                 /* djh - I have serious doubts this is right... */
 583                 .xclk         = EM28XX_XCLK_IR_RC5_MODE |
 584                                 EM28XX_XCLK_FREQUENCY_10MHZ,
 585         },
 586         [EM2870_BOARD_COMPRO_VIDEOMATE] = {
 587                 .name         = "Compro, VideoMate U3",
 588                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 589                 .tuner_type   = TUNER_ABSENT, /* MT2060 */
 590         },
 591
 592         [EM2880_BOARD_TERRATEC_HYBRID_XS_FR] = {
 593                 .name         = "Terratec Hybrid XS Secam",
 594                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 595                 .has_msp34xx  = 1,
 596                 .tuner_type   = TUNER_XC2028,
 597                 .tuner_gpio   = default_tuner_gpio,
 598                 .decoder      = EM28XX_TVP5150,
 599                 .input        = { {
 600                         .type     = EM28XX_VMUX_TELEVISION,
 601                         .vmux     = TVP5150_COMPOSITE0,
 602                         .amux     = EM28XX_AMUX_VIDEO,
 603                         .gpio     = default_analog,
 604                 }, {
 605                         .type     = EM28XX_VMUX_COMPOSITE1,
 606                         .vmux     = TVP5150_COMPOSITE1,
 607                         .amux     = EM28XX_AMUX_LINE_IN,
 608                         .gpio     = default_analog,
 609                 }, {
 610                         .type     = EM28XX_VMUX_SVIDEO,
 611                         .vmux     = TVP5150_SVIDEO,
 612                         .amux     = EM28XX_AMUX_LINE_IN,
 613                         .gpio     = default_analog,
 614                 } },
 615         },
 616         [EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900] = {
 617                 .name         = "Hauppauge WinTV HVR 900",
 618                 .tda9887_conf = TDA9887_PRESENT,
 619                 .tuner_type   = TUNER_XC2028,
 620                 .tuner_gpio   = default_tuner_gpio,
 621                 .mts_firmware = 1,
 622                 .has_dvb      = 1,
 623                 .dvb_gpio     = hauppauge_wintv_hvr_900_digital,
 624                 .ir_codes     = ir_codes_hauppauge_new,
 625                 .decoder      = EM28XX_TVP5150,
 626                 .input        = { {
 627                         .type     = EM28XX_VMUX_TELEVISION,
 628                         .vmux     = TVP5150_COMPOSITE0,
 629                         .amux     = EM28XX_AMUX_VIDEO,
 630                         .gpio     = hauppauge_wintv_hvr_900_analog,
 631                 }, {
 632                         .type     = EM28XX_VMUX_COMPOSITE1,
 633                         .vmux     = TVP5150_COMPOSITE1,
 634                         .amux     = EM28XX_AMUX_LINE_IN,
 635                         .gpio     = hauppauge_wintv_hvr_900_analog,
 636                 }, {
 637                         .type     = EM28XX_VMUX_SVIDEO,
 638                         .vmux     = TVP5150_SVIDEO,
 639                         .amux     = EM28XX_AMUX_LINE_IN,
 640                         .gpio     = hauppauge_wintv_hvr_900_analog,
 641                 } },
 642         },
 643         [EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2] = {
 644                 .name         = "Hauppauge WinTV HVR 900 (R2)",
 645                 .tda9887_conf = TDA9887_PRESENT,
 646                 .tuner_type   = TUNER_XC2028,
 647                 .tuner_gpio   = default_tuner_gpio,
 648                 .mts_firmware = 1,
 649                 .ir_codes     = ir_codes_hauppauge_new,
 650                 .decoder      = EM28XX_TVP5150,
 651                 .input        = { {
 652                         .type     = EM28XX_VMUX_TELEVISION,
 653                         .vmux     = TVP5150_COMPOSITE0,
 654                         .amux     = EM28XX_AMUX_VIDEO,
 655                         .gpio     = hauppauge_wintv_hvr_900_analog,
 656                 }, {
 657                         .type     = EM28XX_VMUX_COMPOSITE1,
 658                         .vmux     = TVP5150_COMPOSITE1,
 659                         .amux     = EM28XX_AMUX_LINE_IN,
 660                         .gpio     = hauppauge_wintv_hvr_900_analog,
 661                 }, {
 662                         .type     = EM28XX_VMUX_SVIDEO,
 663                         .vmux     = TVP5150_SVIDEO,
 664                         .amux     = EM28XX_AMUX_LINE_IN,
 665                         .gpio     = hauppauge_wintv_hvr_900_analog,
 666                 } },
 667         },
 668         [EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850] = {
 669                 .name           = "Hauppauge WinTV HVR 850",
 670                 .tuner_type     = TUNER_XC2028,
 671                 .tuner_gpio     = default_tuner_gpio,
 672                 .mts_firmware   = 1,
 673                 .has_dvb        = 1,
 674                 .dvb_gpio       = hauppauge_wintv_hvr_900_digital,
 675                 .ir_codes       = ir_codes_hauppauge_new,
 676                 .decoder        = EM28XX_TVP5150,
 677                 .input          = { {
 678                         .type     = EM28XX_VMUX_TELEVISION,
 679                         .vmux     = TVP5150_COMPOSITE0,
 680                         .amux     = EM28XX_AMUX_VIDEO,
 681                         .gpio     = hauppauge_wintv_hvr_900_analog,
 682                 }, {
 683                         .type     = EM28XX_VMUX_COMPOSITE1,
 684                         .vmux     = TVP5150_COMPOSITE1,
 685                         .amux     = EM28XX_AMUX_LINE_IN,
 686                         .gpio     = hauppauge_wintv_hvr_900_analog,
 687                 }, {
 688                         .type     = EM28XX_VMUX_SVIDEO,
 689                         .vmux     = TVP5150_SVIDEO,
 690                         .amux     = EM28XX_AMUX_LINE_IN,
 691                         .gpio     = hauppauge_wintv_hvr_900_analog,
 692                 } },
 693         },
 694         [EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950] = {
 695                 .name           = "Hauppauge WinTV HVR 950",
 696                 .tuner_type     = TUNER_XC2028,
 697                 .tuner_gpio     = default_tuner_gpio,
 698                 .mts_firmware   = 1,
 699                 .has_dvb        = 1,
 700                 .dvb_gpio       = hauppauge_wintv_hvr_900_digital,
 701                 .ir_codes       = ir_codes_hauppauge_new,
 702                 .decoder        = EM28XX_TVP5150,
 703                 .input          = { {
 704                         .type     = EM28XX_VMUX_TELEVISION,
 705                         .vmux     = TVP5150_COMPOSITE0,
 706                         .amux     = EM28XX_AMUX_VIDEO,
 707                         .gpio     = hauppauge_wintv_hvr_900_analog,
 708                 }, {
 709                         .type     = EM28XX_VMUX_COMPOSITE1,
 710                         .vmux     = TVP5150_COMPOSITE1,
 711                         .amux     = EM28XX_AMUX_LINE_IN,
 712                         .gpio     = hauppauge_wintv_hvr_900_analog,
 713                 }, {
 714                         .type     = EM28XX_VMUX_SVIDEO,
 715                         .vmux     = TVP5150_SVIDEO,
 716                         .amux     = EM28XX_AMUX_LINE_IN,
 717                         .gpio     = hauppauge_wintv_hvr_900_analog,
 718                 } },
 719         },
 720         [EM2880_BOARD_PINNACLE_PCTV_HD_PRO] = {
 721                 .name           = "Pinnacle PCTV HD Pro Stick",
 722                 .tuner_type     = TUNER_XC2028,
 723                 .tuner_gpio   = default_tuner_gpio,
 724                 .mts_firmware   = 1,
 725                 .has_dvb        = 1,
 726                 .dvb_gpio       = hauppauge_wintv_hvr_900_digital,
 727                 .ir_codes       = ir_codes_pinnacle_pctv_hd,
 728                 .decoder        = EM28XX_TVP5150,
 729                 .input          = { {
 730                         .type     = EM28XX_VMUX_TELEVISION,
 731                         .vmux     = TVP5150_COMPOSITE0,
 732                         .amux     = EM28XX_AMUX_VIDEO,
 733                         .gpio     = hauppauge_wintv_hvr_900_analog,
 734                 }, {
 735                         .type     = EM28XX_VMUX_COMPOSITE1,
 736                         .vmux     = TVP5150_COMPOSITE1,
 737                         .amux     = EM28XX_AMUX_LINE_IN,
 738                         .gpio     = hauppauge_wintv_hvr_900_analog,
 739                 }, {
 740                         .type     = EM28XX_VMUX_SVIDEO,
 741                         .vmux     = TVP5150_SVIDEO,
 742                         .amux     = EM28XX_AMUX_LINE_IN,
 743                         .gpio     = hauppauge_wintv_hvr_900_analog,
 744                 } },
 745         },
 746         [EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600] = {
 747                 .name           = "AMD ATI TV Wonder HD 600",
 748                 .tuner_type     = TUNER_XC2028,
 749                 .tuner_gpio     = default_tuner_gpio,
 750                 .mts_firmware   = 1,
 751                 .has_dvb        = 1,
 752                 .dvb_gpio       = hauppauge_wintv_hvr_900_digital,
 753                 .ir_codes       = ir_codes_ati_tv_wonder_hd_600,
 754                 .decoder        = EM28XX_TVP5150,
 755                 .input          = { {
 756                         .type     = EM28XX_VMUX_TELEVISION,
 757                         .vmux     = TVP5150_COMPOSITE0,
 758                         .amux     = EM28XX_AMUX_VIDEO,
 759                         .gpio     = hauppauge_wintv_hvr_900_analog,
 760                 }, {
 761                         .type     = EM28XX_VMUX_COMPOSITE1,
 762                         .vmux     = TVP5150_COMPOSITE1,
 763                         .amux     = EM28XX_AMUX_LINE_IN,
 764                         .gpio     = hauppauge_wintv_hvr_900_analog,
 765                 }, {
 766                         .type     = EM28XX_VMUX_SVIDEO,
 767                         .vmux     = TVP5150_SVIDEO,
 768                         .amux     = EM28XX_AMUX_LINE_IN,
 769                         .gpio     = hauppauge_wintv_hvr_900_analog,
 770                 } },
 771         },
 772         [EM2880_BOARD_TERRATEC_HYBRID_XS] = {
 773                 .name           = "Terratec Hybrid XS",
 774                 .tuner_type     = TUNER_XC2028,
 775                 .tuner_gpio     = default_tuner_gpio,
 776                 .decoder        = EM28XX_TVP5150,
 777                 .has_dvb        = 1,
 778                 .dvb_gpio       = default_analog,
 779                 .input          = { {
 780                         .type     = EM28XX_VMUX_TELEVISION,
 781                         .vmux     = TVP5150_COMPOSITE0,
 782                         .amux     = EM28XX_AMUX_VIDEO,
 783                         .gpio     = default_analog,
 784                 }, {
 785                         .type     = EM28XX_VMUX_COMPOSITE1,
 786                         .vmux     = TVP5150_COMPOSITE1,
 787                         .amux     = EM28XX_AMUX_LINE_IN,
 788                         .gpio     = default_analog,
 789                 }, {
 790                         .type     = EM28XX_VMUX_SVIDEO,
 791                         .vmux     = TVP5150_SVIDEO,
 792                         .amux     = EM28XX_AMUX_LINE_IN,
 793                         .gpio     = default_analog,
 794                 } },
 795         },
 796         /* maybe there's a reason behind it why Terratec sells the Hybrid XS
 797            as Prodigy XS with a different PID, let's keep it separated for now
 798            maybe we'll need it lateron */
 799         [EM2880_BOARD_TERRATEC_PRODIGY_XS] = {
 800                 .name         = "Terratec Prodigy XS",
 801                 .tuner_type   = TUNER_XC2028,
 802                 .tuner_gpio   = default_tuner_gpio,
 803                 .decoder      = EM28XX_TVP5150,
 804                 .input        = { {
 805                         .type     = EM28XX_VMUX_TELEVISION,
 806                         .vmux     = TVP5150_COMPOSITE0,
 807                         .amux     = EM28XX_AMUX_VIDEO,
 808                         .gpio     = hauppauge_wintv_hvr_900_analog,
 809                 }, {
 810                         .type     = EM28XX_VMUX_COMPOSITE1,
 811                         .vmux     = TVP5150_COMPOSITE1,
 812                         .amux     = EM28XX_AMUX_LINE_IN,
 813                         .gpio     = hauppauge_wintv_hvr_900_analog,
 814                 }, {
 815                         .type     = EM28XX_VMUX_SVIDEO,
 816                         .vmux     = TVP5150_SVIDEO,
 817                         .amux     = EM28XX_AMUX_LINE_IN,
 818                         .gpio     = hauppauge_wintv_hvr_900_analog,
 819                 } },
 820         },
 821         [EM2820_BOARD_MSI_VOX_USB_2] = {
 822                 .name              = "MSI VOX USB 2.0",
 823                 .tuner_type        = TUNER_LG_PAL_NEW_TAPC,
 824                 .tda9887_conf      = TDA9887_PRESENT      |
 825                                      TDA9887_PORT1_ACTIVE |
 826                                      TDA9887_PORT2_ACTIVE,
 827                 .max_range_640_480 = 1,
 828                 .decoder           = EM28XX_SAA711X,
 829                 .input             = { {
 830                         .type      = EM28XX_VMUX_TELEVISION,
 831                         .vmux      = SAA7115_COMPOSITE4,
 832                         .amux      = EM28XX_AMUX_VIDEO,
 833                 }, {
 834                         .type      = EM28XX_VMUX_COMPOSITE1,
 835                         .vmux      = SAA7115_COMPOSITE0,
 836                         .amux      = EM28XX_AMUX_LINE_IN,
 837                 }, {
 838                         .type      = EM28XX_VMUX_SVIDEO,
 839                         .vmux      = SAA7115_SVIDEO3,
 840                         .amux      = EM28XX_AMUX_LINE_IN,
 841                 } },
 842         },
 843         [EM2800_BOARD_TERRATEC_CINERGY_200] = {
 844                 .name         = "Terratec Cinergy 200 USB",
 845                 .is_em2800    = 1,
 846                 .tuner_type   = TUNER_LG_PAL_NEW_TAPC,
 847                 .tda9887_conf = TDA9887_PRESENT,
 848                 .decoder      = EM28XX_SAA711X,
 849                 .input        = { {
 850                         .type     = EM28XX_VMUX_TELEVISION,
 851                         .vmux     = SAA7115_COMPOSITE2,
 852                         .amux     = EM28XX_AMUX_VIDEO,
 853                 }, {
 854                         .type     = EM28XX_VMUX_COMPOSITE1,
 855                         .vmux     = SAA7115_COMPOSITE0,
 856                         .amux     = EM28XX_AMUX_LINE_IN,
 857                 }, {
 858                         .type     = EM28XX_VMUX_SVIDEO,
 859                         .vmux     = SAA7115_SVIDEO3,
 860                         .amux     = EM28XX_AMUX_LINE_IN,
 861                 } },
 862         },
 863         [EM2800_BOARD_GRABBEEX_USB2800] = {
 864                 .name       = "eMPIA Technology, Inc. GrabBeeX+ Video Encoder",
 865                 .is_em2800  = 1,
 866                 .decoder    = EM28XX_SAA711X,
 867                 .tuner_type = TUNER_ABSENT, /* capture only board */
 868                 .input      = { {
 869                         .type     = EM28XX_VMUX_COMPOSITE1,
 870                         .vmux     = SAA7115_COMPOSITE0,
 871                         .amux     = EM28XX_AMUX_LINE_IN,
 872                 }, {
 873                         .type     = EM28XX_VMUX_SVIDEO,
 874                         .vmux     = SAA7115_SVIDEO3,
 875                         .amux     = EM28XX_AMUX_LINE_IN,
 876                 } },
 877         },
 878         [EM2800_BOARD_LEADTEK_WINFAST_USBII] = {
 879                 .name         = "Leadtek Winfast USB II",
 880                 .is_em2800    = 1,
 881                 .tuner_type   = TUNER_LG_PAL_NEW_TAPC,
 882                 .tda9887_conf = TDA9887_PRESENT,
 883                 .decoder      = EM28XX_SAA711X,
 884                 .input        = { {
 885                         .type     = EM28XX_VMUX_TELEVISION,
 886                         .vmux     = SAA7115_COMPOSITE2,
 887                         .amux     = EM28XX_AMUX_VIDEO,
 888                 }, {
 889                         .type     = EM28XX_VMUX_COMPOSITE1,
 890                         .vmux     = SAA7115_COMPOSITE0,
 891                         .amux     = EM28XX_AMUX_LINE_IN,
 892                 }, {
 893                         .type     = EM28XX_VMUX_SVIDEO,
 894                         .vmux     = SAA7115_SVIDEO3,
 895                         .amux     = EM28XX_AMUX_LINE_IN,
 896                 } },
 897         },
 898         [EM2800_BOARD_KWORLD_USB2800] = {
 899                 .name         = "Kworld USB2800",
 900                 .is_em2800    = 1,
 901                 .tuner_type   = TUNER_PHILIPS_FCV1236D,
 902                 .tda9887_conf = TDA9887_PRESENT,
 903                 .decoder      = EM28XX_SAA711X,
 904                 .input        = { {
 905                         .type     = EM28XX_VMUX_TELEVISION,
 906                         .vmux     = SAA7115_COMPOSITE2,
 907                         .amux     = EM28XX_AMUX_VIDEO,
 908                 }, {
 909                         .type     = EM28XX_VMUX_COMPOSITE1,
 910                         .vmux     = SAA7115_COMPOSITE0,
 911                         .amux     = EM28XX_AMUX_LINE_IN,
 912                 }, {
 913                         .type     = EM28XX_VMUX_SVIDEO,
 914                         .vmux     = SAA7115_SVIDEO3,
 915                         .amux     = EM28XX_AMUX_LINE_IN,
 916                 } },
 917         },
 918         [EM2820_BOARD_PINNACLE_DVC_90] = {
 919                 .name         = "Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker",
 920                 .tuner_type   = TUNER_ABSENT, /* capture only board */
 921                 .decoder      = EM28XX_SAA711X,
 922                 .input        = { {
 923                         .type     = EM28XX_VMUX_COMPOSITE1,
 924                         .vmux     = SAA7115_COMPOSITE0,
 925                         .amux     = EM28XX_AMUX_LINE_IN,
 926                 }, {
 927                         .type     = EM28XX_VMUX_SVIDEO,
 928                         .vmux     = SAA7115_SVIDEO3,
 929                         .amux     = EM28XX_AMUX_LINE_IN,
 930                 } },
 931         },
 932         [EM2800_BOARD_VGEAR_POCKETTV] = {
 933                 .name         = "V-Gear PocketTV",
 934                 .is_em2800    = 1,
 935                 .tuner_type   = TUNER_LG_PAL_NEW_TAPC,
 936                 .tda9887_conf = TDA9887_PRESENT,
 937                 .decoder      = EM28XX_SAA711X,
 938                 .input        = { {
 939                         .type     = EM28XX_VMUX_TELEVISION,
 940                         .vmux     = SAA7115_COMPOSITE2,
 941                         .amux     = EM28XX_AMUX_VIDEO,
 942                 }, {
 943                         .type     = EM28XX_VMUX_COMPOSITE1,
 944                         .vmux     = SAA7115_COMPOSITE0,
 945                         .amux     = EM28XX_AMUX_LINE_IN,
 946                 }, {
 947                         .type     = EM28XX_VMUX_SVIDEO,
 948                         .vmux     = SAA7115_SVIDEO3,
 949                         .amux     = EM28XX_AMUX_LINE_IN,
 950                 } },
 951         },
 952         [EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2] = {
 953                 .name         = "Pixelview PlayTV Box 4 USB 2.0",
 954                 .tda9887_conf = TDA9887_PRESENT,
 955                 .tuner_type   = TUNER_YMEC_TVF_5533MF,
 956                 .decoder      = EM28XX_SAA711X,
 957                 .input        = { {
 958                         .type     = EM28XX_VMUX_TELEVISION,
 959                         .vmux     = SAA7115_COMPOSITE2,
 960                         .amux     = EM28XX_AMUX_VIDEO,
 961                         .aout     = EM28XX_AOUT_MONO |  /* I2S */
 962                                     EM28XX_AOUT_MASTER, /* Line out pin */
 963                 }, {
 964                         .type     = EM28XX_VMUX_COMPOSITE1,
 965                         .vmux     = SAA7115_COMPOSITE0,
 966                         .amux     = EM28XX_AMUX_LINE_IN,
 967                 }, {
 968                         .type     = EM28XX_VMUX_SVIDEO,
 969                         .vmux     = SAA7115_SVIDEO3,
 970                         .amux     = EM28XX_AMUX_LINE_IN,
 971                 } },
 972         },
 973         [EM2820_BOARD_PROLINK_PLAYTV_USB2] = {
 974                 .name         = "SIIG AVTuner-PVR / Pixelview Prolink PlayTV USB 2.0",
 975                 .has_snapshot_button = 1,
 976                 .tda9887_conf = TDA9887_PRESENT,
 977                 .tuner_type   = TUNER_YMEC_TVF_5533MF,
 978                 .decoder      = EM28XX_SAA711X,
 979                 .input        = { {
 980                         .type     = EM28XX_VMUX_TELEVISION,
 981                         .vmux     = SAA7115_COMPOSITE2,
 982                         .amux     = EM28XX_AMUX_VIDEO,
 983                         .aout     = EM28XX_AOUT_MONO |  /* I2S */
 984                                     EM28XX_AOUT_MASTER, /* Line out pin */
 985                 }, {
 986                         .type     = EM28XX_VMUX_COMPOSITE1,
 987                         .vmux     = SAA7115_COMPOSITE0,
 988                         .amux     = EM28XX_AMUX_LINE_IN,
 989                 }, {
 990                         .type     = EM28XX_VMUX_SVIDEO,
 991                         .vmux     = SAA7115_SVIDEO3,
 992                         .amux     = EM28XX_AMUX_LINE_IN,
 993                 } },
 994         },
 995         [EM2860_BOARD_POINTNIX_INTRAORAL_CAMERA] = {
 996                 .name                = "PointNix Intra-Oral Camera",
 997                 .has_snapshot_button = 1,
 998                 .tda9887_conf        = TDA9887_PRESENT,
 999                 .tuner_type          = TUNER_ABSENT,
1000                 .decoder             = EM28XX_SAA711X,
1001                 .input               = { {
1002                         .type     = EM28XX_VMUX_SVIDEO,
1003                         .vmux     = SAA7115_SVIDEO3,
1004                         .amux     = EM28XX_AMUX_VIDEO,
1005                 } },
1006         },
1007         [EM2880_BOARD_MSI_DIGIVOX_AD] = {
1008                 .name         = "MSI DigiVox A/D",
1009                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
1010                 .tuner_type   = TUNER_XC2028,
1011                 .tuner_gpio   = default_tuner_gpio,
1012                 .decoder      = EM28XX_TVP5150,
1013                 .input        = { {
1014                         .type     = EM28XX_VMUX_TELEVISION,
1015                         .vmux     = TVP5150_COMPOSITE0,
1016                         .amux     = EM28XX_AMUX_VIDEO,
1017                         .gpio     = em2880_msi_digivox_ad_analog,
1018                 }, {
1019                         .type     = EM28XX_VMUX_COMPOSITE1,
1020                         .vmux     = TVP5150_COMPOSITE1,
1021                         .amux     = EM28XX_AMUX_LINE_IN,
1022                         .gpio     = em2880_msi_digivox_ad_analog,
1023                 }, {
1024                         .type     = EM28XX_VMUX_SVIDEO,
1025                         .vmux     = TVP5150_SVIDEO,
1026                         .amux     = EM28XX_AMUX_LINE_IN,
1027                         .gpio     = em2880_msi_digivox_ad_analog,
1028                 } },
1029         },
1030         [EM2880_BOARD_MSI_DIGIVOX_AD_II] = {
1031                 .name         = "MSI DigiVox A/D II",
1032                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
1033                 .tuner_type   = TUNER_XC2028,
1034                 .tuner_gpio   = default_tuner_gpio,
1035                 .decoder      = EM28XX_TVP5150,
1036                 .input        = { {
1037                         .type     = EM28XX_VMUX_TELEVISION,
1038                         .vmux     = TVP5150_COMPOSITE0,
1039                         .amux     = EM28XX_AMUX_VIDEO,
1040                         .gpio     = em2880_msi_digivox_ad_analog,
1041                 }, {
1042                         .type     = EM28XX_VMUX_COMPOSITE1,
1043                         .vmux     = TVP5150_COMPOSITE1,
1044                         .amux     = EM28XX_AMUX_LINE_IN,
1045                         .gpio     = em2880_msi_digivox_ad_analog,
1046                 }, {
1047                         .type     = EM28XX_VMUX_SVIDEO,
1048                         .vmux     = TVP5150_SVIDEO,
1049                         .amux     = EM28XX_AMUX_LINE_IN,
1050                         .gpio     = em2880_msi_digivox_ad_analog,
1051                 } },
1052         },
1053         [EM2880_BOARD_KWORLD_DVB_305U] = {
1054                 .name         = "KWorld DVB-T 305U",
1055                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
1056                 .tuner_type   = TUNER_XC2028,
1057                 .tuner_gpio   = default_tuner_gpio,
1058                 .decoder      = EM28XX_TVP5150,
1059                 .input        = { {
1060                         .type     = EM28XX_VMUX_TELEVISION,
1061                         .vmux     = TVP5150_COMPOSITE0,
1062                         .amux     = EM28XX_AMUX_VIDEO,
1063                 }, {
1064                         .type     = EM28XX_VMUX_COMPOSITE1,
1065                         .vmux     = TVP5150_COMPOSITE1,
1066                         .amux     = EM28XX_AMUX_LINE_IN,
1067                 }, {
1068                         .type     = EM28XX_VMUX_SVIDEO,
1069                         .vmux     = TVP5150_SVIDEO,
1070                         .amux     = EM28XX_AMUX_LINE_IN,
1071                 } },
1072         },
1073         [EM2880_BOARD_KWORLD_DVB_310U] = {
1074                 .name         = "KWorld DVB-T 310U",
1075                 .tuner_type   = TUNER_XC2028,
1076                 .tuner_gpio   = default_tuner_gpio,
1077                 .has_dvb      = 1,
1078                 .dvb_gpio     = default_digital,
1079                 .mts_firmware = 1,
1080                 .decoder      = EM28XX_TVP5150,
1081                 .input        = { {
1082                         .type     = EM28XX_VMUX_TELEVISION,
1083                         .vmux     = TVP5150_COMPOSITE0,
1084                         .amux     = EM28XX_AMUX_VIDEO,
1085                         .gpio     = default_analog,
1086                 }, {
1087                         .type     = EM28XX_VMUX_COMPOSITE1,
1088                         .vmux     = TVP5150_COMPOSITE1,
1089                         .amux     = EM28XX_AMUX_LINE_IN,
1090                         .gpio     = default_analog,
1091                 }, {    /* S-video has not been tested yet */
1092                         .type     = EM28XX_VMUX_SVIDEO,
1093                         .vmux     = TVP5150_SVIDEO,
1094                         .amux     = EM28XX_AMUX_LINE_IN,
1095                         .gpio     = default_analog,
1096                 } },
1097         },
1098         [EM2881_BOARD_DNT_DA2_HYBRID] = {
1099                 .name         = "DNT DA2 Hybrid",
1100                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
1101                 .tuner_type   = TUNER_XC2028,
1102                 .tuner_gpio   = default_tuner_gpio,
1103                 .decoder      = EM28XX_TVP5150,
1104                 .input        = { {
1105                         .type     = EM28XX_VMUX_TELEVISION,
1106                         .vmux     = TVP5150_COMPOSITE0,
1107                         .amux     = EM28XX_AMUX_VIDEO,
1108                         .gpio     = default_analog,
1109                 }, {
1110                         .type     = EM28XX_VMUX_COMPOSITE1,
1111                         .vmux     = TVP5150_COMPOSITE1,
1112                         .amux     = EM28XX_AMUX_LINE_IN,
1113                         .gpio     = default_analog,
1114                 }, {
1115                         .type     = EM28XX_VMUX_SVIDEO,
1116                         .vmux     = TVP5150_SVIDEO,
1117                         .amux     = EM28XX_AMUX_LINE_IN,
1118                         .gpio     = default_analog,
1119                 } },
1120         },
1121         [EM2881_BOARD_PINNACLE_HYBRID_PRO] = {
1122                 .name         = "Pinnacle Hybrid Pro",
1123                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
1124                 .tuner_type   = TUNER_XC2028,
1125                 .tuner_gpio   = default_tuner_gpio,
1126                 .decoder      = EM28XX_TVP5150,
1127                 .input        = { {
1128                         .type     = EM28XX_VMUX_TELEVISION,
1129                         .vmux     = TVP5150_COMPOSITE0,
1130                         .amux     = EM28XX_AMUX_VIDEO,
1131                         .gpio     = default_analog,
1132                 }, {
1133                         .type     = EM28XX_VMUX_COMPOSITE1,
1134                         .vmux     = TVP5150_COMPOSITE1,
1135                         .amux     = EM28XX_AMUX_LINE_IN,
1136                         .gpio     = default_analog,
1137                 }, {
1138                         .type     = EM28XX_VMUX_SVIDEO,
1139                         .vmux     = TVP5150_SVIDEO,
1140                         .amux     = EM28XX_AMUX_LINE_IN,
1141                         .gpio     = default_analog,
1142                 } },
1143         },
1144         [EM2882_BOARD_PINNACLE_HYBRID_PRO] = {
1145                 .name         = "Pinnacle Hybrid Pro (2)",
1146                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
1147                 .tuner_type   = TUNER_XC2028,
1148                 .tuner_gpio   = default_tuner_gpio,
1149                 .mts_firmware = 1,
1150                 .decoder      = EM28XX_TVP5150,
1151                 .input        = { {
1152                         .type     = EM28XX_VMUX_TELEVISION,
1153                         .vmux     = TVP5150_COMPOSITE0,
1154                         .amux     = EM28XX_AMUX_VIDEO,
1155                         .gpio     = hauppauge_wintv_hvr_900_analog,
1156                 }, {
1157                         .type     = EM28XX_VMUX_COMPOSITE1,
1158                         .vmux     = TVP5150_COMPOSITE1,
1159                         .amux     = EM28XX_AMUX_LINE_IN,
1160                         .gpio     = hauppauge_wintv_hvr_900_analog,
1161                 }, {
1162                         .type     = EM28XX_VMUX_SVIDEO,
1163                         .vmux     = TVP5150_SVIDEO,
1164                         .amux     = EM28XX_AMUX_LINE_IN,
1165                         .gpio     = hauppauge_wintv_hvr_900_analog,
1166                 } },
1167         },
1168         [EM2882_BOARD_KWORLD_VS_DVBT] = {
1169                 .name         = "Kworld VS-DVB-T 323UR",
1170                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
1171                 .tuner_type   = TUNER_XC2028,
1172                 .tuner_gpio   = default_tuner_gpio,
1173                 .decoder      = EM28XX_TVP5150,
1174                 .input        = { {
1175                         .type     = EM28XX_VMUX_TELEVISION,
1176                         .vmux     = TVP5150_COMPOSITE0,
1177                         .amux     = EM28XX_AMUX_VIDEO,
1178                 }, {
1179                         .type     = EM28XX_VMUX_COMPOSITE1,
1180                         .vmux     = TVP5150_COMPOSITE1,
1181                         .amux     = EM28XX_AMUX_LINE_IN,
1182                 }, {
1183                         .type     = EM28XX_VMUX_SVIDEO,
1184                         .vmux     = TVP5150_SVIDEO,
1185                         .amux     = EM28XX_AMUX_LINE_IN,
1186                 } },
1187         },
1188         [EM2882_BOARD_TERRATEC_HYBRID_XS] = {
1189                 .name         = "Terratec Hybrid XS (em2882)",
1190                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
1191                 .tuner_type   = TUNER_XC2028,
1192                 .tuner_gpio   = default_tuner_gpio,
1193                 .decoder      = EM28XX_TVP5150,
1194                 .input        = { {
1195                         .type     = EM28XX_VMUX_TELEVISION,
1196                         .vmux     = TVP5150_COMPOSITE0,
1197                         .amux     = EM28XX_AMUX_VIDEO,
1198                         .gpio     = hauppauge_wintv_hvr_900_analog,
1199                 }, {
1200                         .type     = EM28XX_VMUX_COMPOSITE1,
1201                         .vmux     = TVP5150_COMPOSITE1,
1202                         .amux     = EM28XX_AMUX_LINE_IN,
1203                         .gpio     = hauppauge_wintv_hvr_900_analog,
1204                 }, {
1205                         .type     = EM28XX_VMUX_SVIDEO,
1206                         .vmux     = TVP5150_SVIDEO,
1207                         .amux     = EM28XX_AMUX_LINE_IN,
1208                         .gpio     = hauppauge_wintv_hvr_900_analog,
1209                 } },
1210         },
1211         [EM2883_BOARD_KWORLD_HYBRID_330U] = {
1212                 .name         = "Kworld PlusTV HD Hybrid 330",
1213                 .tuner_type   = TUNER_XC2028,
1214                 .tuner_gpio   = default_tuner_gpio,
1215                 .decoder      = EM28XX_TVP5150,
1216                 .mts_firmware = 1,
1217                 .has_dvb      = 1,
1218                 .dvb_gpio     = kworld_330u_digital,
1219                 .xclk             = EM28XX_XCLK_FREQUENCY_12MHZ,
1220                 .i2c_speed        = EM28XX_I2C_CLK_WAIT_ENABLE |
1221                                     EM28XX_I2C_EEPROM_ON_BOARD |
1222                                     EM28XX_I2C_EEPROM_KEY_VALID,
1223                 .input        = { {
1224                         .type     = EM28XX_VMUX_TELEVISION,
1225                         .vmux     = TVP5150_COMPOSITE0,
1226                         .amux     = EM28XX_AMUX_VIDEO,
1227                         .gpio     = kworld_330u_analog,
1228                         .aout     = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
1229                 }, {
1230                         .type     = EM28XX_VMUX_COMPOSITE1,
1231                         .vmux     = TVP5150_COMPOSITE1,
1232                         .amux     = EM28XX_AMUX_LINE_IN,
1233                         .gpio     = kworld_330u_analog,
1234                         .aout     = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
1235                 }, {
1236                         .type     = EM28XX_VMUX_SVIDEO,
1237                         .vmux     = TVP5150_SVIDEO,
1238                         .amux     = EM28XX_AMUX_LINE_IN,
1239                         .gpio     = kworld_330u_analog,
1240                 } },
1241         },
1242         [EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU] = {
1243                 .name         = "Compro VideoMate ForYou/Stereo",
1244                 .tuner_type   = TUNER_LG_PAL_NEW_TAPC,
1245                 .tvaudio_addr = 0xb0,
1246                 .tda9887_conf = TDA9887_PRESENT,
1247                 .decoder      = EM28XX_TVP5150,
1248                 .adecoder     = EM28XX_TVAUDIO,
1249                 .mute_gpio    = compro_mute_gpio,
1250                 .input        = { {
1251                         .type     = EM28XX_VMUX_TELEVISION,
1252                         .vmux     = TVP5150_COMPOSITE0,
1253                         .amux     = EM28XX_AMUX_VIDEO,
1254                         .gpio     = compro_unmute_tv_gpio,
1255                 }, {
1256                         .type     = EM28XX_VMUX_SVIDEO,
1257                         .vmux     = TVP5150_SVIDEO,
1258                         .amux     = EM28XX_AMUX_LINE_IN,
1259                         .gpio     = compro_unmute_svid_gpio,
1260                 } },
1261         },
1262         [EM2860_BOARD_KAIOMY_TVNPC_U2] = {
1263                 .name         = "Kaiomy TVnPC U2",
1264                 .vchannels    = 3,
1265                 .tuner_type   = TUNER_XC2028,
1266                 .tuner_addr   = 0x61,
1267                 .mts_firmware = 1,
1268                 .decoder      = EM28XX_TVP5150,
1269                 .tuner_gpio   = default_tuner_gpio,
1270                 .ir_codes     = ir_codes_kaiomy,
1271                 .input          = { {
1272                         .type     = EM28XX_VMUX_TELEVISION,
1273                         .vmux     = TVP5150_COMPOSITE0,
1274                         .amux     = EM28XX_AMUX_VIDEO,
1275
1276                 }, {
1277                         .type     = EM28XX_VMUX_COMPOSITE1,
1278                         .vmux     = TVP5150_COMPOSITE1,
1279                         .amux     = EM28XX_AMUX_LINE_IN,
1280                 }, {
1281                         .type     = EM28XX_VMUX_SVIDEO,
1282                         .vmux     = TVP5150_SVIDEO,
1283                         .amux     = EM28XX_AMUX_LINE_IN,
1284                 } },
1285                 .radio          = {
1286                         .type     = EM28XX_RADIO,
1287                         .amux     = EM28XX_AMUX_LINE_IN,
1288                 }
1289         },
1290         [EM2860_BOARD_EASYCAP] = {
1291                 .name         = "Easy Cap Capture DC-60",
1292                 .vchannels    = 2,
1293                 .tuner_type   = TUNER_ABSENT,
1294                 .decoder      = EM28XX_SAA711X,
1295                 .input           = { {
1296                         .type     = EM28XX_VMUX_COMPOSITE1,
1297                         .vmux     = SAA7115_COMPOSITE0,
1298                         .amux     = EM28XX_AMUX_LINE_IN,
1299                 }, {
1300                         .type     = EM28XX_VMUX_SVIDEO,
1301                         .vmux     = SAA7115_SVIDEO3,
1302                         .amux     = EM28XX_AMUX_LINE_IN,
1303                 } },
1304         },
1305         [EM2820_BOARD_IODATA_GVMVP_SZ] = {
1306                 .name       = "IO-DATA GV-MVP/SZ",
1307                 .tuner_type   = TUNER_PHILIPS_FM1236_MK3,
1308                 .tuner_gpio   = default_tuner_gpio,
1309                 .tda9887_conf = TDA9887_PRESENT,
1310                 .decoder      = EM28XX_TVP5150,
1311                 .input        = { {
1312                         .type     = EM28XX_VMUX_TELEVISION,
1313                         .vmux     = TVP5150_COMPOSITE0,
1314                         .amux     = EM28XX_AMUX_VIDEO,
1315                 }, { /* Composite has not been tested yet */
1316                         .type     = EM28XX_VMUX_COMPOSITE1,
1317                         .vmux     = TVP5150_COMPOSITE1,
1318                         .amux     = EM28XX_AMUX_VIDEO,
1319                 }, { /* S-video has not been tested yet */
1320                         .type     = EM28XX_VMUX_SVIDEO,
1321                         .vmux     = TVP5150_SVIDEO,
1322                         .amux     = EM28XX_AMUX_VIDEO,
1323                 } },
1324         },
1325 };
1326 const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards);
1327
1328 /* table of devices that work with this driver */
1329 struct usb_device_id em28xx_id_table[] = {
1330         { USB_DEVICE(0xeb1a, 0x2750),
1331                         .driver_info = EM2750_BOARD_UNKNOWN },
1332         { USB_DEVICE(0xeb1a, 0x2751),
1333                         .driver_info = EM2750_BOARD_UNKNOWN },
1334         { USB_DEVICE(0xeb1a, 0x2800),
1335                         .driver_info = EM2800_BOARD_UNKNOWN },
1336         { USB_DEVICE(0xeb1a, 0x2820),
1337                         .driver_info = EM2820_BOARD_UNKNOWN },
1338         { USB_DEVICE(0xeb1a, 0x2821),
1339                         .driver_info = EM2820_BOARD_UNKNOWN },
1340         { USB_DEVICE(0xeb1a, 0x2860),
1341                         .driver_info = EM2820_BOARD_UNKNOWN },
1342         { USB_DEVICE(0xeb1a, 0x2861),
1343                         .driver_info = EM2820_BOARD_UNKNOWN },
1344         { USB_DEVICE(0xeb1a, 0x2870),
1345                         .driver_info = EM2820_BOARD_UNKNOWN },
1346         { USB_DEVICE(0xeb1a, 0x2881),
1347                         .driver_info = EM2820_BOARD_UNKNOWN },
1348         { USB_DEVICE(0xeb1a, 0x2883),
1349                         .driver_info = EM2820_BOARD_UNKNOWN },
1350         { USB_DEVICE(0xeb1a, 0xe300),
1351                         .driver_info = EM2861_BOARD_KWORLD_PVRTV_300U },
1352         { USB_DEVICE(0xeb1a, 0xe303),
1353                         .driver_info = EM2860_BOARD_KAIOMY_TVNPC_U2 },
1354         { USB_DEVICE(0xeb1a, 0xe305),
1355                         .driver_info = EM2880_BOARD_KWORLD_DVB_305U },
1356         { USB_DEVICE(0xeb1a, 0xe310),
1357                         .driver_info = EM2880_BOARD_MSI_DIGIVOX_AD },
1358         { USB_DEVICE(0xeb1a, 0xa316),
1359                         .driver_info = EM2883_BOARD_KWORLD_HYBRID_330U },
1360         { USB_DEVICE(0xeb1a, 0xe320),
1361                         .driver_info = EM2880_BOARD_MSI_DIGIVOX_AD_II },
1362         { USB_DEVICE(0xeb1a, 0xe323),
1363                         .driver_info = EM2882_BOARD_KWORLD_VS_DVBT },
1364         { USB_DEVICE(0xeb1a, 0xe350),
1365                         .driver_info = EM2870_BOARD_KWORLD_350U },
1366         { USB_DEVICE(0xeb1a, 0xe355),
1367                         .driver_info = EM2870_BOARD_KWORLD_355U },
1368         { USB_DEVICE(0xeb1a, 0x2801),
1369                         .driver_info = EM2800_BOARD_GRABBEEX_USB2800 },
1370         { USB_DEVICE(0xeb1a, 0xe357),
1371                         .driver_info = EM2870_BOARD_KWORLD_355U },
1372         { USB_DEVICE(0x1b80, 0xe302),
1373                         .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, /* Kaiser Baas Video to DVD maker */
1374         { USB_DEVICE(0x0ccd, 0x0036),
1375                         .driver_info = EM2820_BOARD_TERRATEC_CINERGY_250 },
1376         { USB_DEVICE(0x0ccd, 0x004c),
1377                         .driver_info = EM2880_BOARD_TERRATEC_HYBRID_XS_FR },
1378         { USB_DEVICE(0x0ccd, 0x004f),
1379                         .driver_info = EM2860_BOARD_TERRATEC_HYBRID_XS },
1380         { USB_DEVICE(0x0ccd, 0x005e),
1381                         .driver_info = EM2882_BOARD_TERRATEC_HYBRID_XS },
1382         { USB_DEVICE(0x0ccd, 0x0042),
1383                         .driver_info = EM2880_BOARD_TERRATEC_HYBRID_XS },
1384         { USB_DEVICE(0x0ccd, 0x0043),
1385                         .driver_info = EM2870_BOARD_TERRATEC_XS },
1386         { USB_DEVICE(0x0ccd, 0x0047),
1387                         .driver_info = EM2880_BOARD_TERRATEC_PRODIGY_XS },
1388         { USB_DEVICE(0x185b, 0x2870),
1389                         .driver_info = EM2870_BOARD_COMPRO_VIDEOMATE },
1390         { USB_DEVICE(0x185b, 0x2041),
1391                         .driver_info = EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU },
1392         { USB_DEVICE(0x2040, 0x4200),
1393                         .driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 },
1394         { USB_DEVICE(0x2040, 0x4201),
1395                         .driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 },
1396         { USB_DEVICE(0x2040, 0x6500),
1397                         .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900 },
1398         { USB_DEVICE(0x2040, 0x6502),
1399                         .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2 },
1400         { USB_DEVICE(0x2040, 0x6513), /* HCW HVR-980 */
1401                         .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
1402         { USB_DEVICE(0x2040, 0x6517), /* HP  HVR-950 */
1403                         .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
1404         { USB_DEVICE(0x2040, 0x651b), /* RP  HVR-950 */
1405                         .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
1406         { USB_DEVICE(0x2040, 0x651f),
1407                         .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850 },
1408         { USB_DEVICE(0x0438, 0xb002),
1409                         .driver_info = EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600 },
1410         { USB_DEVICE(0x2001, 0xf112),
1411                         .driver_info = EM2820_BOARD_DLINK_USB_TV },
1412         { USB_DEVICE(0x2304, 0x0207),
1413                         .driver_info = EM2820_BOARD_PINNACLE_DVC_90 },
1414         { USB_DEVICE(0x2304, 0x0208),
1415                         .driver_info = EM2820_BOARD_PINNACLE_USB_2 },
1416         { USB_DEVICE(0x2304, 0x021a),
1417                         .driver_info = EM2820_BOARD_PINNACLE_DVC_90 },
1418         { USB_DEVICE(0x2304, 0x0226),
1419                         .driver_info = EM2882_BOARD_PINNACLE_HYBRID_PRO },
1420         { USB_DEVICE(0x2304, 0x0227),
1421                         .driver_info = EM2880_BOARD_PINNACLE_PCTV_HD_PRO },
1422         { USB_DEVICE(0x0413, 0x6023),
1423                         .driver_info = EM2800_BOARD_LEADTEK_WINFAST_USBII },
1424         { USB_DEVICE(0x093b, 0xa005),
1425                         .driver_info = EM2861_BOARD_PLEXTOR_PX_TV100U },
1426         { USB_DEVICE(0x04bb, 0x0515),
1427                         .driver_info = EM2820_BOARD_IODATA_GVMVP_SZ },
1428         { },
1429 };
1430 MODULE_DEVICE_TABLE(usb, em28xx_id_table);
1431
1432 /*
1433  * EEPROM hash table for devices with generic USB IDs
1434  */
1435 static struct em28xx_hash_table em28xx_eeprom_hash[] = {
1436         /* P/N: SA 60002070465 Tuner: TVF7533-MF */
1437         {0x6ce05a8f, EM2820_BOARD_PROLINK_PLAYTV_USB2, TUNER_YMEC_TVF_5533MF},
1438         {0x72cc5a8b, EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2, TUNER_YMEC_TVF_5533MF},
1439         {0x966a0441, EM2880_BOARD_KWORLD_DVB_310U, TUNER_XC2028},
1440 };
1441
1442 /* I2C devicelist hash table for devices with generic USB IDs */
1443 static struct em28xx_hash_table em28xx_i2c_hash[] = {
1444         {0xb06a32c3, EM2800_BOARD_TERRATEC_CINERGY_200, TUNER_LG_PAL_NEW_TAPC},
1445         {0xf51200e3, EM2800_BOARD_VGEAR_POCKETTV, TUNER_LG_PAL_NEW_TAPC},
1446         {0x1ba50080, EM2860_BOARD_POINTNIX_INTRAORAL_CAMERA, TUNER_ABSENT},
1447         {0xc51200e3, EM2820_BOARD_GADMEI_TVR200, TUNER_LG_PAL_NEW_TAPC},
1448 };
1449
1450 /* I2C possible address to saa7115, tvp5150, msp3400, tvaudio */
1451 static unsigned short saa711x_addrs[] = {
1452         0x4a >> 1, 0x48 >> 1,   /* SAA7111, SAA7111A and SAA7113 */
1453         0x42 >> 1, 0x40 >> 1,   /* SAA7114, SAA7115 and SAA7118 */
1454         I2C_CLIENT_END };
1455
1456 static unsigned short tvp5150_addrs[] = {
1457         0xb8 >> 1,
1458         0xba >> 1,
1459         I2C_CLIENT_END
1460 };
1461
1462 static unsigned short msp3400_addrs[] = {
1463         0x80 >> 1,
1464         0x88 >> 1,
1465         I2C_CLIENT_END
1466 };
1467
1468 int em28xx_tuner_callback(void *ptr, int component, int command, int arg)
1469 {
1470         int rc = 0;
1471         struct em28xx *dev = ptr;
1472
1473         if (dev->tuner_type != TUNER_XC2028)
1474                 return 0;
1475
1476         if (command != XC2028_TUNER_RESET)
1477                 return 0;
1478
1479         rc = em28xx_gpio_set(dev, dev->board.tuner_gpio);
1480
1481         return rc;
1482 }
1483 EXPORT_SYMBOL_GPL(em28xx_tuner_callback);
1484
1485 static inline void em28xx_set_model(struct em28xx *dev)
1486 {
1487         memcpy(&dev->board, &em28xx_boards[dev->model], sizeof(dev->board));
1488
1489         /* Those are the default values for the majority of boards
1490            Use those values if not specified otherwise at boards entry
1491          */
1492         if (!dev->board.xclk)
1493                 dev->board.xclk = EM28XX_XCLK_IR_RC5_MODE |
1494                                   EM28XX_XCLK_FREQUENCY_12MHZ;
1495
1496         if (!dev->board.i2c_speed)
1497                 dev->board.i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
1498                                        EM28XX_I2C_FREQ_100_KHZ;
1499 }
1500
1501 /* Since em28xx_pre_card_setup() requires a proper dev->model,
1502  * this won't work for boards with generic PCI IDs
1503  */
1504 void em28xx_pre_card_setup(struct em28xx *dev)
1505 {
1506         int rc;
1507
1508         em28xx_set_model(dev);
1509
1510         em28xx_info("Identified as %s (card=%d)\n",
1511                     dev->board.name, dev->model);
1512
1513         /* Set the default GPO/GPIO for legacy devices */
1514         dev->reg_gpo_num = EM2880_R04_GPO;
1515         dev->reg_gpio_num = EM28XX_R08_GPIO;
1516
1517         dev->wait_after_write = 5;
1518
1519         /* Based on the Chip ID, set the device configuration */
1520         rc = em28xx_read_reg(dev, EM28XX_R0A_CHIPID);
1521         if (rc > 0) {
1522                 dev->chip_id = rc;
1523
1524                 switch (dev->chip_id) {
1525                 case CHIP_ID_EM2750:
1526                         em28xx_info("chip ID is em2750\n");
1527                         break;
1528                 case CHIP_ID_EM2820:
1529                         em28xx_info("chip ID is em2820\n");
1530                         break;
1531                 case CHIP_ID_EM2840:
1532                         em28xx_info("chip ID is em2840\n");
1533                         break;
1534                 case CHIP_ID_EM2860:
1535                         em28xx_info("chip ID is em2860\n");
1536                         break;
1537                 case CHIP_ID_EM2870:
1538                         em28xx_info("chip ID is em2870\n");
1539                         dev->wait_after_write = 0;
1540                         break;
1541                 case CHIP_ID_EM2874:
1542                         em28xx_info("chip ID is em2874\n");
1543                         dev->reg_gpio_num = EM2874_R80_GPIO;
1544                         dev->wait_after_write = 0;
1545                         break;
1546                 case CHIP_ID_EM2883:
1547                         em28xx_info("chip ID is em2882/em2883\n");
1548                         dev->wait_after_write = 0;
1549                         break;
1550                 default:
1551                         em28xx_info("em28xx chip ID = %d\n", dev->chip_id);
1552                 }
1553         }
1554
1555         /* Prepopulate cached GPO register content */
1556         rc = em28xx_read_reg(dev, dev->reg_gpo_num);
1557         if (rc >= 0)
1558                 dev->reg_gpo = rc;
1559
1560         /* Set the initial XCLK and I2C clock values based on the board
1561            definition */
1562         em28xx_write_reg(dev, EM28XX_R0F_XCLK, dev->board.xclk & 0x7f);
1563         em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, dev->board.i2c_speed);
1564         msleep(50);
1565
1566         /* request some modules */
1567         switch (dev->model) {
1568         case EM2861_BOARD_PLEXTOR_PX_TV100U:
1569                 /* FIXME guess */
1570                 /* Turn on analog audio output */
1571                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
1572                 break;
1573         case EM2861_BOARD_KWORLD_PVRTV_300U:
1574         case EM2880_BOARD_KWORLD_DVB_305U:
1575                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0x6d);
1576                 msleep(10);
1577                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0x7d);
1578                 msleep(10);
1579                 break;
1580         case EM2870_BOARD_COMPRO_VIDEOMATE:
1581                 /* TODO: someone can do some cleanup here...
1582                          not everything's needed */
1583                 em28xx_write_reg(dev, EM2880_R04_GPO, 0x00);
1584                 msleep(10);
1585                 em28xx_write_reg(dev, EM2880_R04_GPO, 0x01);
1586                 msleep(10);
1587                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
1588                 mdelay(70);
1589                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfc);
1590                 mdelay(70);
1591                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xdc);
1592                 mdelay(70);
1593                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfc);
1594                 mdelay(70);
1595                 break;
1596         case EM2870_BOARD_TERRATEC_XS_MT2060:
1597                 /* this device needs some gpio writes to get the DVB-T
1598                    demod work */
1599                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
1600                 mdelay(70);
1601                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xde);
1602                 mdelay(70);
1603                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
1604                 mdelay(70);
1605                 break;
1606         case EM2870_BOARD_PINNACLE_PCTV_DVB:
1607                 /* this device needs some gpio writes to get the
1608                    DVB-T demod work */
1609                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
1610                 mdelay(70);
1611                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xde);
1612                 mdelay(70);
1613                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
1614                 mdelay(70);
1615                 break;
1616         case EM2820_BOARD_GADMEI_UTV310:
1617         case EM2820_BOARD_MSI_VOX_USB_2:
1618                 /* enables audio for that devices */
1619                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
1620                 break;
1621
1622         case EM2860_BOARD_KAIOMY_TVNPC_U2:
1623                 em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x07", 1);
1624                 em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
1625                 em28xx_write_regs(dev, 0x0d, "\x42", 1);
1626                 em28xx_write_regs(dev, 0x08, "\xfd", 1);
1627                 msleep(10);
1628                 em28xx_write_regs(dev, 0x08, "\xff", 1);
1629                 msleep(10);
1630                 em28xx_write_regs(dev, 0x08, "\x7f", 1);
1631                 msleep(10);
1632                 em28xx_write_regs(dev, 0x08, "\x6b", 1);
1633
1634                 break;
1635         case EM2860_BOARD_EASYCAP:
1636                 em28xx_write_regs(dev, 0x08, "\xf8", 1);
1637                 break;
1638
1639         case EM2820_BOARD_IODATA_GVMVP_SZ:
1640                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xff);
1641                 msleep(70);
1642                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xf7);
1643                 msleep(10);
1644                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
1645                 msleep(70);
1646                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
1647                 msleep(70);
1648                 break;
1649         }
1650
1651         em28xx_gpio_set(dev, dev->board.tuner_gpio);
1652         em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
1653
1654         /* Unlock device */
1655         em28xx_set_mode(dev, EM28XX_SUSPEND);
1656 }
1657
1658 static void em28xx_setup_xc3028(struct em28xx *dev, struct xc2028_ctrl *ctl)
1659 {
1660         memset(ctl, 0, sizeof(*ctl));
1661
1662         ctl->fname   = XC2028_DEFAULT_FIRMWARE;
1663         ctl->max_len = 64;
1664         ctl->mts = em28xx_boards[dev->model].mts_firmware;
1665
1666         switch (dev->model) {
1667         case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
1668                 ctl->demod = XC3028_FE_ZARLINK456;
1669                 break;
1670         case EM2880_BOARD_TERRATEC_HYBRID_XS:
1671                 ctl->demod = XC3028_FE_ZARLINK456;
1672                 break;
1673         case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2:
1674                 /* djh - Not sure which demod we need here */
1675                 ctl->demod = XC3028_FE_DEFAULT;
1676                 break;
1677         case EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600:
1678                 ctl->demod = XC3028_FE_DEFAULT;
1679                 ctl->fname = XC3028L_DEFAULT_FIRMWARE;
1680                 break;
1681         case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850:
1682         case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950:
1683         case EM2880_BOARD_PINNACLE_PCTV_HD_PRO:
1684                 /* FIXME: Better to specify the needed IF */
1685                 ctl->demod = XC3028_FE_DEFAULT;
1686                 break;
1687         case EM2883_BOARD_KWORLD_HYBRID_330U:
1688                 ctl->demod = XC3028_FE_CHINA;
1689                 ctl->fname = XC2028_DEFAULT_FIRMWARE;
1690                 break;
1691         default:
1692                 ctl->demod = XC3028_FE_OREN538;
1693         }
1694 }
1695
1696 static void em28xx_tuner_setup(struct em28xx *dev)
1697 {
1698         struct tuner_setup           tun_setup;
1699         struct v4l2_frequency        f;
1700
1701         if (dev->tuner_type == TUNER_ABSENT)
1702                 return;
1703
1704         memset(&tun_setup, 0, sizeof(tun_setup));
1705
1706         tun_setup.mode_mask = T_ANALOG_TV | T_RADIO;
1707         tun_setup.tuner_callback = em28xx_tuner_callback;
1708
1709         if (dev->board.radio.type) {
1710                 tun_setup.type = dev->board.radio.type;
1711                 tun_setup.addr = dev->board.radio_addr;
1712
1713                 v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_type_addr, &tun_setup);
1714         }
1715
1716         if ((dev->tuner_type != TUNER_ABSENT) && (dev->tuner_type)) {
1717                 tun_setup.type   = dev->tuner_type;
1718                 tun_setup.addr   = dev->tuner_addr;
1719
1720                 v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_type_addr, &tun_setup);
1721         }
1722
1723         if (dev->tda9887_conf) {
1724                 struct v4l2_priv_tun_config tda9887_cfg;
1725
1726                 tda9887_cfg.tuner = TUNER_TDA9887;
1727                 tda9887_cfg.priv = &dev->tda9887_conf;
1728
1729                 v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_config, &tda9887_cfg);
1730         }
1731
1732         if (dev->tuner_type == TUNER_XC2028) {
1733                 struct v4l2_priv_tun_config  xc2028_cfg;
1734                 struct xc2028_ctrl           ctl;
1735
1736                 memset(&xc2028_cfg, 0, sizeof(xc2028_cfg));
1737                 memset(&ctl, 0, sizeof(ctl));
1738
1739                 em28xx_setup_xc3028(dev, &ctl);
1740
1741                 xc2028_cfg.tuner = TUNER_XC2028;
1742                 xc2028_cfg.priv  = &ctl;
1743
1744                 v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_config, &xc2028_cfg);
1745         }
1746
1747         /* configure tuner */
1748         f.tuner = 0;
1749         f.type = V4L2_TUNER_ANALOG_TV;
1750         f.frequency = 9076;     /* just a magic number */
1751         dev->ctl_freq = f.frequency;
1752         v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_frequency, &f);
1753 }
1754
1755 static int em28xx_hint_board(struct em28xx *dev)
1756 {
1757         int i;
1758
1759         /* HINT method: EEPROM
1760          *
1761          * This method works only for boards with eeprom.
1762          * Uses a hash of all eeprom bytes. The hash should be
1763          * unique for a vendor/tuner pair.
1764          * There are a high chance that tuners for different
1765          * video standards produce different hashes.
1766          */
1767         for (i = 0; i < ARRAY_SIZE(em28xx_eeprom_hash); i++) {
1768                 if (dev->hash == em28xx_eeprom_hash[i].hash) {
1769                         dev->model = em28xx_eeprom_hash[i].model;
1770                         dev->tuner_type = em28xx_eeprom_hash[i].tuner;
1771
1772                         em28xx_errdev("Your board has no unique USB ID.\n");
1773                         em28xx_errdev("A hint were successfully done, "
1774                                       "based on eeprom hash.\n");
1775                         em28xx_errdev("This method is not 100%% failproof.\n");
1776                         em28xx_errdev("If the board were missdetected, "
1777                                       "please email this log to:\n");
1778                         em28xx_errdev("\tV4L Mailing List "
1779                                       " <linux-media@vger.kernel.org>\n");
1780                         em28xx_errdev("Board detected as %s\n",
1781                                       em28xx_boards[dev->model].name);
1782
1783                         return 0;
1784                 }
1785         }
1786
1787         /* HINT method: I2C attached devices
1788          *
1789          * This method works for all boards.
1790          * Uses a hash of i2c scanned devices.
1791          * Devices with the same i2c attached chips will
1792          * be considered equal.
1793          * This method is less precise than the eeprom one.
1794          */
1795
1796         /* user did not request i2c scanning => do it now */
1797         if (!dev->i2c_hash)
1798                 em28xx_do_i2c_scan(dev);
1799
1800         for (i = 0; i < ARRAY_SIZE(em28xx_i2c_hash); i++) {
1801                 if (dev->i2c_hash == em28xx_i2c_hash[i].hash) {
1802                         dev->model = em28xx_i2c_hash[i].model;
1803                         dev->tuner_type = em28xx_i2c_hash[i].tuner;
1804                         em28xx_errdev("Your board has no unique USB ID.\n");
1805                         em28xx_errdev("A hint were successfully done, "
1806                                       "based on i2c devicelist hash.\n");
1807                         em28xx_errdev("This method is not 100%% failproof.\n");
1808                         em28xx_errdev("If the board were missdetected, "
1809                                       "please email this log to:\n");
1810                         em28xx_errdev("\tV4L Mailing List "
1811                                       " <linux-media@vger.kernel.org>\n");
1812                         em28xx_errdev("Board detected as %s\n",
1813                                       em28xx_boards[dev->model].name);
1814
1815                         return 0;
1816                 }
1817         }
1818
1819         em28xx_errdev("Your board has no unique USB ID and thus need a "
1820                       "hint to be detected.\n");
1821         em28xx_errdev("You may try to use card=<n> insmod option to "
1822                       "workaround that.\n");
1823         em28xx_errdev("Please send an email with this log to:\n");
1824         em28xx_errdev("\tV4L Mailing List <linux-media@vger.kernel.org>\n");
1825         em28xx_errdev("Board eeprom hash is 0x%08lx\n", dev->hash);
1826         em28xx_errdev("Board i2c devicelist hash is 0x%08lx\n", dev->i2c_hash);
1827
1828         em28xx_errdev("Here is a list of valid choices for the card=<n>"
1829                       " insmod option:\n");
1830         for (i = 0; i < em28xx_bcount; i++) {
1831                 em28xx_errdev("    card=%d -> %s\n",
1832                                 i, em28xx_boards[i].name);
1833         }
1834         return -1;
1835 }
1836
1837 /* ----------------------------------------------------------------------- */
1838 void em28xx_set_ir(struct em28xx *dev, struct IR_i2c *ir)
1839 {
1840         if (disable_ir) {
1841                 ir->get_key = NULL;
1842                 return ;
1843         }
1844
1845         /* detect & configure */
1846         switch (dev->model) {
1847         case (EM2800_BOARD_UNKNOWN):
1848                 break;
1849         case (EM2820_BOARD_UNKNOWN):
1850                 break;
1851         case (EM2800_BOARD_TERRATEC_CINERGY_200):
1852         case (EM2820_BOARD_TERRATEC_CINERGY_250):
1853                 ir->ir_codes = ir_codes_em_terratec;
1854                 ir->get_key = em28xx_get_key_terratec;
1855                 snprintf(ir->c.name, sizeof(ir->c.name),
1856                          "i2c IR (EM28XX Terratec)");
1857                 break;
1858         case (EM2820_BOARD_PINNACLE_USB_2):
1859                 ir->ir_codes = ir_codes_pinnacle_grey;
1860                 ir->get_key = em28xx_get_key_pinnacle_usb_grey;
1861                 snprintf(ir->c.name, sizeof(ir->c.name),
1862                          "i2c IR (EM28XX Pinnacle PCTV)");
1863                 break;
1864         case (EM2820_BOARD_HAUPPAUGE_WINTV_USB_2):
1865                 ir->ir_codes = ir_codes_hauppauge_new;
1866                 ir->get_key = em28xx_get_key_em_haup;
1867                 snprintf(ir->c.name, sizeof(ir->c.name),
1868                          "i2c IR (EM2840 Hauppauge)");
1869                 break;
1870         case (EM2820_BOARD_MSI_VOX_USB_2):
1871                 break;
1872         case (EM2800_BOARD_LEADTEK_WINFAST_USBII):
1873                 break;
1874         case (EM2800_BOARD_KWORLD_USB2800):
1875                 break;
1876         case (EM2800_BOARD_GRABBEEX_USB2800):
1877                 break;
1878         }
1879 }
1880
1881 void em28xx_card_setup(struct em28xx *dev)
1882 {
1883         em28xx_set_model(dev);
1884
1885         dev->tuner_type = em28xx_boards[dev->model].tuner_type;
1886         if (em28xx_boards[dev->model].tuner_addr)
1887                 dev->tuner_addr = em28xx_boards[dev->model].tuner_addr;
1888
1889         /* request some modules */
1890         switch (dev->model) {
1891         case EM2820_BOARD_HAUPPAUGE_WINTV_USB_2:
1892         case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
1893         case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2:
1894         case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850:
1895         case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950:
1896         {
1897                 struct tveeprom tv;
1898 #ifdef CONFIG_MODULES
1899                 request_module("tveeprom");
1900 #endif
1901                 /* Call first TVeeprom */
1902
1903                 dev->i2c_client.addr = 0xa0 >> 1;
1904                 tveeprom_hauppauge_analog(&dev->i2c_client, &tv, dev->eedata);
1905
1906                 dev->tuner_type = tv.tuner_type;
1907
1908                 if (tv.audio_processor == V4L2_IDENT_MSPX4XX) {
1909                         dev->i2s_speed = 2048000;
1910                         dev->board.has_msp34xx = 1;
1911                 }
1912 #ifdef CONFIG_MODULES
1913                 if (tv.has_ir)
1914                         request_module("ir-kbd-i2c");
1915 #endif
1916                 break;
1917         }
1918         case EM2820_BOARD_KWORLD_PVRTV2800RF:
1919                 /* GPIO enables sound on KWORLD PVR TV 2800RF */
1920                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xf9);
1921                 break;
1922         case EM2820_BOARD_UNKNOWN:
1923         case EM2800_BOARD_UNKNOWN:
1924                 /*
1925                  * The K-WORLD DVB-T 310U is detected as an MSI Digivox AD.
1926                  *
1927                  * This occurs because they share identical USB vendor and
1928                  * product IDs.
1929                  *
1930                  * What we do here is look up the EEPROM hash of the K-WORLD
1931                  * and if it is found then we decide that we do not have
1932                  * a DIGIVOX and reset the device to the K-WORLD instead.
1933                  *
1934                  * This solution is only valid if they do not share eeprom
1935                  * hash identities which has not been determined as yet.
1936                  */
1937         case EM2880_BOARD_MSI_DIGIVOX_AD:
1938                 if (!em28xx_hint_board(dev))
1939                         em28xx_set_model(dev);
1940                 break;
1941         }
1942
1943         if (dev->board.has_snapshot_button)
1944                 em28xx_register_snapshot_button(dev);
1945
1946         if (dev->board.valid == EM28XX_BOARD_NOT_VALIDATED) {
1947                 em28xx_errdev("\n\n");
1948                 em28xx_errdev("The support for this board weren't "
1949                               "valid yet.\n");
1950                 em28xx_errdev("Please send a report of having this working\n");
1951                 em28xx_errdev("not to V4L mailing list (and/or to other "
1952                                 "addresses)\n\n");
1953         }
1954
1955         /* Allow override tuner type by a module parameter */
1956         if (tuner >= 0)
1957                 dev->tuner_type = tuner;
1958
1959         /* request some modules */
1960         if (dev->board.has_msp34xx)
1961                 v4l2_i2c_new_probed_subdev(&dev->v4l2_dev, &dev->i2c_adap,
1962                         "msp3400", "msp3400", msp3400_addrs);
1963
1964         if (dev->board.decoder == EM28XX_SAA711X)
1965                 v4l2_i2c_new_probed_subdev(&dev->v4l2_dev, &dev->i2c_adap,
1966                         "saa7115", "saa7115_auto", saa711x_addrs);
1967
1968         if (dev->board.decoder == EM28XX_TVP5150)
1969                 v4l2_i2c_new_probed_subdev(&dev->v4l2_dev, &dev->i2c_adap,
1970                         "tvp5150", "tvp5150", tvp5150_addrs);
1971
1972         if (dev->board.adecoder == EM28XX_TVAUDIO)
1973                 v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
1974                         "tvaudio", "tvaudio", dev->board.tvaudio_addr);
1975
1976         if (dev->board.tuner_type != TUNER_ABSENT) {
1977                 int has_demod = (dev->tda9887_conf & TDA9887_PRESENT);
1978
1979                 if (dev->board.radio.type)
1980                         v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
1981                                 "tuner", "tuner", dev->board.radio_addr);
1982
1983                 if (has_demod)
1984                         v4l2_i2c_new_probed_subdev(&dev->v4l2_dev,
1985                                 &dev->i2c_adap, "tuner", "tuner",
1986                                 v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
1987                 if (dev->tuner_addr == 0) {
1988                         enum v4l2_i2c_tuner_type type =
1989                                 has_demod ? ADDRS_TV_WITH_DEMOD : ADDRS_TV;
1990                         struct v4l2_subdev *sd;
1991
1992                         sd = v4l2_i2c_new_probed_subdev(&dev->v4l2_dev,
1993                                 &dev->i2c_adap, "tuner", "tuner",
1994                                 v4l2_i2c_tuner_addrs(type));
1995
1996                         if (sd)
1997                                 dev->tuner_addr = v4l2_i2c_subdev_addr(sd);
1998                 } else {
1999                         v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
2000                                 "tuner", "tuner", dev->tuner_addr);
2001                 }
2002         }
2003
2004         em28xx_tuner_setup(dev);
2005         em28xx_ir_init(dev);
2006 }
2007
2008
2009 #if defined(CONFIG_MODULES) && defined(MODULE)
2010 static void request_module_async(struct work_struct *work)
2011 {
2012         struct em28xx *dev = container_of(work,
2013                              struct em28xx, request_module_wk);
2014
2015         if (dev->has_audio_class)
2016                 request_module("snd-usb-audio");
2017         else if (dev->has_alsa_audio)
2018                 request_module("em28xx-alsa");
2019
2020         if (dev->board.has_dvb)
2021                 request_module("em28xx-dvb");
2022 }
2023
2024 static void request_modules(struct em28xx *dev)
2025 {
2026         INIT_WORK(&dev->request_module_wk, request_module_async);
2027         schedule_work(&dev->request_module_wk);
2028 }
2029 #else
2030 #define request_modules(dev)
2031 #endif /* CONFIG_MODULES */
2032
2033 /*
2034  * em28xx_realease_resources()
2035  * unregisters the v4l2,i2c and usb devices
2036  * called when the device gets disconected or at module unload
2037 */
2038 void em28xx_release_resources(struct em28xx *dev)
2039 {
2040         if (dev->sbutton_input_dev)
2041                 em28xx_deregister_snapshot_button(dev);
2042
2043         if (dev->ir)
2044                 em28xx_ir_fini(dev);
2045
2046         /*FIXME: I2C IR should be disconnected */
2047
2048         em28xx_release_analog_resources(dev);
2049
2050         em28xx_remove_from_devlist(dev);
2051
2052         em28xx_i2c_unregister(dev);
2053
2054         v4l2_device_unregister(&dev->v4l2_dev);
2055
2056         usb_put_dev(dev->udev);
2057
2058         /* Mark device as unused */
2059         em28xx_devused &= ~(1 << dev->devno);
2060 };
2061
2062 /*
2063  * em28xx_init_dev()
2064  * allocates and inits the device structs, registers i2c bus and v4l device
2065  */
2066 static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev,
2067                            struct usb_interface *interface,
2068                            int minor)
2069 {
2070         struct em28xx *dev = *devhandle;
2071         int retval = -ENOMEM;
2072         int errCode;
2073
2074         dev->udev = udev;
2075         mutex_init(&dev->ctrl_urb_lock);
2076         spin_lock_init(&dev->slock);
2077         init_waitqueue_head(&dev->open);
2078         init_waitqueue_head(&dev->wait_frame);
2079         init_waitqueue_head(&dev->wait_stream);
2080
2081         dev->em28xx_write_regs = em28xx_write_regs;
2082         dev->em28xx_read_reg = em28xx_read_reg;
2083         dev->em28xx_read_reg_req_len = em28xx_read_reg_req_len;
2084         dev->em28xx_write_regs_req = em28xx_write_regs_req;
2085         dev->em28xx_read_reg_req = em28xx_read_reg_req;
2086         dev->board.is_em2800 = em28xx_boards[dev->model].is_em2800;
2087
2088         em28xx_pre_card_setup(dev);
2089
2090         if (!dev->board.is_em2800) {
2091                 /* Sets I2C speed to 100 KHz */
2092                 retval = em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, 0x40);
2093                 if (retval < 0) {
2094                         em28xx_errdev("%s: em28xx_write_regs_req failed!"
2095                                       " retval [%d]\n",
2096                                       __func__, retval);
2097                         return retval;
2098                 }
2099         }
2100
2101         retval = v4l2_device_register(&interface->dev, &dev->v4l2_dev);
2102         if (retval < 0) {
2103                 em28xx_errdev("Call to v4l2_device_register() failed!\n");
2104                 return retval;
2105         }
2106
2107         /* register i2c bus */
2108         errCode = em28xx_i2c_register(dev);
2109         if (errCode < 0) {
2110                 v4l2_device_unregister(&dev->v4l2_dev);
2111                 em28xx_errdev("%s: em28xx_i2c_register - errCode [%d]!\n",
2112                         __func__, errCode);
2113                 return errCode;
2114         }
2115
2116         /* Do board specific init and eeprom reading */
2117         em28xx_card_setup(dev);
2118
2119         /* Configure audio */
2120         errCode = em28xx_audio_setup(dev);
2121         if (errCode < 0) {
2122                 v4l2_device_unregister(&dev->v4l2_dev);
2123                 em28xx_errdev("%s: Error while setting audio - errCode [%d]!\n",
2124                         __func__, errCode);
2125         }
2126
2127         /* wake i2c devices */
2128         em28xx_wake_i2c(dev);
2129
2130         /* init video dma queues */
2131         INIT_LIST_HEAD(&dev->vidq.active);
2132         INIT_LIST_HEAD(&dev->vidq.queued);
2133
2134
2135         if (dev->board.has_msp34xx) {
2136                 /* Send a reset to other chips via gpio */
2137                 errCode = em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xf7);
2138                 if (errCode < 0) {
2139                         em28xx_errdev("%s: em28xx_write_regs_req - "
2140                                       "msp34xx(1) failed! errCode [%d]\n",
2141                                       __func__, errCode);
2142                         return errCode;
2143                 }
2144                 msleep(3);
2145
2146                 errCode = em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xff);
2147                 if (errCode < 0) {
2148                         em28xx_errdev("%s: em28xx_write_regs_req - "
2149                                       "msp34xx(2) failed! errCode [%d]\n",
2150                                       __func__, errCode);
2151                         return errCode;
2152                 }
2153                 msleep(3);
2154         }
2155
2156         em28xx_add_into_devlist(dev);
2157
2158         retval = em28xx_register_analog_devices(dev);
2159         if (retval < 0) {
2160                 em28xx_release_resources(dev);
2161                 goto fail_reg_devices;
2162         }
2163
2164         em28xx_init_extension(dev);
2165
2166         /* Save some power by putting tuner to sleep */
2167         v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_standby);
2168
2169         return 0;
2170
2171 fail_reg_devices:
2172         return retval;
2173 }
2174
2175 /*
2176  * em28xx_usb_probe()
2177  * checks for supported devices
2178  */
2179 static int em28xx_usb_probe(struct usb_interface *interface,
2180                             const struct usb_device_id *id)
2181 {
2182         const struct usb_endpoint_descriptor *endpoint;
2183         struct usb_device *udev;
2184         struct usb_interface *uif;
2185         struct em28xx *dev = NULL;
2186         int retval;
2187         int i, nr, ifnum, isoc_pipe;
2188         char *speed;
2189         char descr[255] = "";
2190
2191         udev = usb_get_dev(interface_to_usbdev(interface));
2192         ifnum = interface->altsetting[0].desc.bInterfaceNumber;
2193
2194         /* Check to see next free device and mark as used */
2195         nr = find_first_zero_bit(&em28xx_devused, EM28XX_MAXBOARDS);
2196         em28xx_devused |= 1<<nr;
2197
2198         /* Don't register audio interfaces */
2199         if (interface->altsetting[0].desc.bInterfaceClass == USB_CLASS_AUDIO) {
2200                 em28xx_err(DRIVER_NAME " audio device (%04x:%04x): "
2201                         "interface %i, class %i\n",
2202                         le16_to_cpu(udev->descriptor.idVendor),
2203                         le16_to_cpu(udev->descriptor.idProduct),
2204                         ifnum,
2205                         interface->altsetting[0].desc.bInterfaceClass);
2206
2207                 em28xx_devused &= ~(1<<nr);
2208                 retval = -ENODEV;
2209                 goto err;
2210         }
2211
2212         endpoint = &interface->cur_altsetting->endpoint[0].desc;
2213
2214         /* check if the device has the iso in endpoint at the correct place */
2215         if (usb_endpoint_xfer_isoc(endpoint)
2216             &&
2217             (interface->altsetting[1].endpoint[0].desc.wMaxPacketSize == 940)) {
2218                 /* It's a newer em2874/em2875 device */
2219                 isoc_pipe = 0;
2220         } else {
2221                 int check_interface = 1;
2222                 isoc_pipe = 1;
2223                 endpoint = &interface->cur_altsetting->endpoint[1].desc;
2224                 if (!usb_endpoint_xfer_isoc(endpoint))
2225                         check_interface = 0;
2226
2227                 if (usb_endpoint_dir_out(endpoint))
2228                         check_interface = 0;
2229
2230                 if (!check_interface) {
2231                         em28xx_err(DRIVER_NAME " video device (%04x:%04x): "
2232                                 "interface %i, class %i found.\n",
2233                                 le16_to_cpu(udev->descriptor.idVendor),
2234                                 le16_to_cpu(udev->descriptor.idProduct),
2235                                 ifnum,
2236                                 interface->altsetting[0].desc.bInterfaceClass);
2237
2238                         em28xx_err(DRIVER_NAME " This is an anciliary "
2239                                 "interface not used by the driver\n");
2240
2241                         em28xx_devused &= ~(1<<nr);
2242                         retval = -ENODEV;
2243                         goto err;
2244                 }
2245         }
2246
2247         switch (udev->speed) {
2248         case USB_SPEED_LOW:
2249                 speed = "1.5";
2250                 break;
2251         case USB_SPEED_UNKNOWN:
2252         case USB_SPEED_FULL:
2253                 speed = "12";
2254                 break;
2255         case USB_SPEED_HIGH:
2256                 speed = "480";
2257                 break;
2258         default:
2259                 speed = "unknown";
2260         }
2261
2262         if (udev->manufacturer)
2263                 strlcpy(descr, udev->manufacturer, sizeof(descr));
2264
2265         if (udev->product) {
2266                 if (*descr)
2267                         strlcat(descr, " ", sizeof(descr));
2268                 strlcat(descr, udev->product, sizeof(descr));
2269         }
2270         if (*descr)
2271                 strlcat(descr, " ", sizeof(descr));
2272
2273         printk(DRIVER_NAME ": New device %s@ %s Mbps "
2274                 "(%04x:%04x, interface %d, class %d)\n",
2275                 descr,
2276                 speed,
2277                 le16_to_cpu(udev->descriptor.idVendor),
2278                 le16_to_cpu(udev->descriptor.idProduct),
2279                 ifnum,
2280                 interface->altsetting->desc.bInterfaceNumber);
2281
2282         if (nr >= EM28XX_MAXBOARDS) {
2283                 printk(DRIVER_NAME ": Supports only %i em28xx boards.\n",
2284                                 EM28XX_MAXBOARDS);
2285                 em28xx_devused &= ~(1<<nr);
2286                 retval = -ENOMEM;
2287                 goto err;
2288         }
2289
2290         /* allocate memory for our device state and initialize it */
2291         dev = kzalloc(sizeof(*dev), GFP_KERNEL);
2292         if (dev == NULL) {
2293                 em28xx_err(DRIVER_NAME ": out of memory!\n");
2294                 em28xx_devused &= ~(1<<nr);
2295                 retval = -ENOMEM;
2296                 goto err;
2297         }
2298
2299         snprintf(dev->name, 29, "em28xx #%d", nr);
2300         dev->devno = nr;
2301         dev->model = id->driver_info;
2302         dev->alt   = -1;
2303
2304         /* Checks if audio is provided by some interface */
2305         for (i = 0; i < udev->config->desc.bNumInterfaces; i++) {
2306                 uif = udev->config->interface[i];
2307                 if (uif->altsetting[0].desc.bInterfaceClass == USB_CLASS_AUDIO) {
2308                         dev->has_audio_class = 1;
2309                         break;
2310                 }
2311         }
2312
2313         /* compute alternate max packet sizes */
2314         uif = udev->actconfig->interface[0];
2315
2316         dev->num_alt = uif->num_altsetting;
2317         dev->alt_max_pkt_size = kmalloc(32 * dev->num_alt, GFP_KERNEL);
2318
2319         if (dev->alt_max_pkt_size == NULL) {
2320                 em28xx_errdev("out of memory!\n");
2321                 em28xx_devused &= ~(1<<nr);
2322                 kfree(dev);
2323                 retval = -ENOMEM;
2324                 goto err;
2325         }
2326
2327         for (i = 0; i < dev->num_alt ; i++) {
2328                 u16 tmp = le16_to_cpu(uif->altsetting[i].endpoint[isoc_pipe].desc.wMaxPacketSize);
2329                 dev->alt_max_pkt_size[i] =
2330                     (tmp & 0x07ff) * (((tmp & 0x1800) >> 11) + 1);
2331         }
2332
2333         if ((card[nr] >= 0) && (card[nr] < em28xx_bcount))
2334                 dev->model = card[nr];
2335
2336         /* allocate device struct */
2337         mutex_init(&dev->lock);
2338         mutex_lock(&dev->lock);
2339         retval = em28xx_init_dev(&dev, udev, interface, nr);
2340         if (retval) {
2341                 em28xx_devused &= ~(1<<dev->devno);
2342                 kfree(dev);
2343                 goto err;
2344         }
2345
2346         /* save our data pointer in this interface device */
2347         usb_set_intfdata(interface, dev);
2348
2349         request_modules(dev);
2350
2351         /* Should be the last thing to do, to avoid newer udev's to
2352            open the device before fully initializing it
2353          */
2354         mutex_unlock(&dev->lock);
2355
2356         return 0;
2357
2358 err:
2359         return retval;
2360 }
2361
2362 /*
2363  * em28xx_usb_disconnect()
2364  * called when the device gets diconencted
2365  * video device will be unregistered on v4l2_close in case it is still open
2366  */
2367 static void em28xx_usb_disconnect(struct usb_interface *interface)
2368 {
2369         struct em28xx *dev;
2370
2371         dev = usb_get_intfdata(interface);
2372         usb_set_intfdata(interface, NULL);
2373
2374         if (!dev)
2375                 return;
2376
2377         em28xx_info("disconnecting %s\n", dev->vdev->name);
2378
2379         /* wait until all current v4l2 io is finished then deallocate
2380            resources */
2381         mutex_lock(&dev->lock);
2382
2383         wake_up_interruptible_all(&dev->open);
2384
2385         v4l2_device_disconnect(&dev->v4l2_dev);
2386
2387         if (dev->users) {
2388                 em28xx_warn
2389                     ("device /dev/video%d is open! Deregistration and memory "
2390                      "deallocation are deferred on close.\n",
2391                                 dev->vdev->num);
2392
2393                 dev->state |= DEV_MISCONFIGURED;
2394                 em28xx_uninit_isoc(dev);
2395                 dev->state |= DEV_DISCONNECTED;
2396                 wake_up_interruptible(&dev->wait_frame);
2397                 wake_up_interruptible(&dev->wait_stream);
2398         } else {
2399                 dev->state |= DEV_DISCONNECTED;
2400                 em28xx_release_resources(dev);
2401         }
2402
2403         em28xx_close_extension(dev);
2404
2405         mutex_unlock(&dev->lock);
2406
2407         if (!dev->users) {
2408                 kfree(dev->alt_max_pkt_size);
2409                 kfree(dev);
2410         }
2411 }
2412
2413 static struct usb_driver em28xx_usb_driver = {
2414         .name = "em28xx",
2415         .probe = em28xx_usb_probe,
2416         .disconnect = em28xx_usb_disconnect,
2417         .id_table = em28xx_id_table,
2418 };
2419
2420 static int __init em28xx_module_init(void)
2421 {
2422         int result;
2423
2424         /* register this driver with the USB subsystem */
2425         result = usb_register(&em28xx_usb_driver);
2426         if (result)
2427                 em28xx_err(DRIVER_NAME
2428                            " usb_register failed. Error number %d.\n", result);
2429
2430         printk(KERN_INFO DRIVER_NAME " driver loaded\n");
2431
2432         return result;
2433 }
2434
2435 static void __exit em28xx_module_exit(void)
2436 {
2437         /* deregister this driver with the USB subsystem */
2438         usb_deregister(&em28xx_usb_driver);
2439 }
2440
2441 module_init(em28xx_module_init);
2442 module_exit(em28xx_module_exit);