drivers/media/video/em28xx/em28xx-cards.c

   1 /*
   2    em28xx-cards.c - driver for Empia EM2800/EM2820/2840 USB
   3                     video capture devices
   4
   5    Copyright (C) 2005 Ludovico Cavedon <cavedon@sssup.it>
   6                       Markus Rechberger <mrechberger@gmail.com>
   7                       Mauro Carvalho Chehab <mchehab@infradead.org>
   8                       Sascha Sommer <saschasommer@freenet.de>
   9
  10    This program is free software; you can redistribute it and/or modify
  11    it under the terms of the GNU General Public License as published by
  12    the Free Software Foundation; either version 2 of the License, or
  13    (at your option) any later version.
  14
  15    This program is distributed in the hope that it will be useful,
  16    but WITHOUT ANY WARRANTY; without even the implied warranty of
  17    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  18    GNU General Public License for more details.
  19
  20    You should have received a copy of the GNU General Public License
  21    along with this program; if not, write to the Free Software
  22    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  23  */
  24
  25 #include <linux/init.h>
  26 #include <linux/module.h>
  27 #include <linux/delay.h>
  28 #include <linux/i2c.h>
  29 #include <linux/usb.h>
  30 #include <media/tuner.h>
  31 #include <media/msp3400.h>
  32 #include <media/saa7115.h>
  33 #include <media/tvp5150.h>
  34 #include <media/tveeprom.h>
  35 #include <media/v4l2-common.h>
  36 #include <media/v4l2-chip-ident.h>
  37
  38 #include "em28xx.h"
  39
  40 static int tuner = -1;
  41 module_param(tuner, int, 0444);
  42 MODULE_PARM_DESC(tuner, "tuner type");
  43
  44 static unsigned int disable_ir;
  45 module_param(disable_ir, int, 0444);
  46 MODULE_PARM_DESC(disable_ir, "disable infrared remote support");
  47
  48 struct em28xx_hash_table {
  49         unsigned long hash;
  50         unsigned int  model;
  51         unsigned int  tuner;
  52 };
  53
  54 struct em28xx_board em28xx_boards[] = {
  55         [EM2750_BOARD_UNKNOWN] = {
  56                 .name          = "Unknown EM2750/EM2751 webcam grabber",
  57                 .vchannels     = 1,
  58                 .input         = { {
  59                         .type     = EM28XX_VMUX_COMPOSITE1,
  60                         .vmux     = 0,
  61                         .amux     = 0,
  62                 } },
  63         },
  64         [EM2800_BOARD_UNKNOWN] = {
  65                 .name         = "Unknown EM2800 video grabber",
  66                 .is_em2800    = 1,
  67                 .vchannels    = 2,
  68                 .tda9887_conf = TDA9887_PRESENT,
  69                 .decoder      = EM28XX_SAA7113,
  70                 .input           = { {
  71                         .type     = EM28XX_VMUX_COMPOSITE1,
  72                         .vmux     = SAA7115_COMPOSITE0,
  73                         .amux     = 1,
  74                 }, {
  75                         .type     = EM28XX_VMUX_SVIDEO,
  76                         .vmux     = SAA7115_SVIDEO3,
  77                         .amux     = 1,
  78                 } },
  79         },
  80         [EM2820_BOARD_UNKNOWN] = {
  81                 .name         = "Unknown EM2750/28xx video grabber",
  82                 .is_em2800    = 0,
  83                 .tuner_type   = TUNER_ABSENT,
  84         },
  85         [EM2750_BOARD_DLCW_130] = {
  86                 /* Beijing Huaqi Information Digital Technology Co., Ltd */
  87                 .name          = "Huaqi DLCW-130",
  88                 .valid         = EM28XX_BOARD_NOT_VALIDATED,
  89                 .vchannels     = 1,
  90                 .input         = { {
  91                         .type     = EM28XX_VMUX_COMPOSITE1,
  92                         .vmux     = 0,
  93                         .amux     = 0,
  94                 } },
  95         },
  96         [EM2800_BOARD_KWORLD_USB2800] = {
  97                 .name         = "Kworld USB2800",
  98                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
  99                 .is_em2800    = 1,
 100                 .vchannels    = 3,
 101                 .tuner_type   = TUNER_PHILIPS_FCV1236D,
 102                 .tda9887_conf = TDA9887_PRESENT,
 103                 .decoder      = EM28XX_SAA7113,
 104                 .input          = { {
 105                         .type     = EM28XX_VMUX_TELEVISION,
 106                         .vmux     = SAA7115_COMPOSITE2,
 107                         .amux     = 0,
 108                 }, {
 109                         .type     = EM28XX_VMUX_COMPOSITE1,
 110                         .vmux     = SAA7115_COMPOSITE0,
 111                         .amux     = 1,
 112                 }, {
 113                         .type     = EM28XX_VMUX_SVIDEO,
 114                         .vmux     = SAA7115_SVIDEO3,
 115                         .amux     = 1,
 116                 } },
 117         },
 118         [EM2820_BOARD_KWORLD_PVRTV2800RF] = {
 119                 .name         = "Kworld PVR TV 2800 RF",
 120                 .is_em2800    = 0,
 121                 .vchannels    = 2,
 122                 .tuner_type   = TUNER_TEMIC_PAL,
 123                 .tda9887_conf = TDA9887_PRESENT,
 124                 .decoder      = EM28XX_SAA7113,
 125                 .input           = { {
 126                         .type     = EM28XX_VMUX_COMPOSITE1,
 127                         .vmux     = SAA7115_COMPOSITE0,
 128                         .amux     = 1,
 129                 }, {
 130                         .type     = EM28XX_VMUX_SVIDEO,
 131                         .vmux     = SAA7115_SVIDEO3,
 132                         .amux     = 1,
 133                 } },
 134         },
 135         [EM2820_BOARD_TERRATEC_CINERGY_250] = {
 136                 .name         = "Terratec Cinergy 250 USB",
 137                 .vchannels    = 3,
 138                 .tuner_type   = TUNER_LG_PAL_NEW_TAPC,
 139                 .tda9887_conf = TDA9887_PRESENT,
 140                 .decoder      = EM28XX_SAA7113,
 141                 .input          = { {
 142                         .type     = EM28XX_VMUX_TELEVISION,
 143                         .vmux     = SAA7115_COMPOSITE2,
 144                         .amux     = 1,
 145                 }, {
 146                         .type     = EM28XX_VMUX_COMPOSITE1,
 147                         .vmux     = SAA7115_COMPOSITE0,
 148                         .amux     = 1,
 149                 }, {
 150                         .type     = EM28XX_VMUX_SVIDEO,
 151                         .vmux     = SAA7115_SVIDEO3,
 152                         .amux     = 1,
 153                 } },
 154         },
 155         [EM2820_BOARD_PINNACLE_USB_2] = {
 156                 .name         = "Pinnacle PCTV USB 2",
 157                 .vchannels    = 3,
 158                 .tuner_type   = TUNER_LG_PAL_NEW_TAPC,
 159                 .tda9887_conf = TDA9887_PRESENT,
 160                 .decoder      = EM28XX_SAA7113,
 161                 .input          = { {
 162                         .type     = EM28XX_VMUX_TELEVISION,
 163                         .vmux     = SAA7115_COMPOSITE2,
 164                         .amux     = 0,
 165                 }, {
 166                         .type     = EM28XX_VMUX_COMPOSITE1,
 167                         .vmux     = SAA7115_COMPOSITE0,
 168                         .amux     = 1,
 169                 }, {
 170                         .type     = EM28XX_VMUX_SVIDEO,
 171                         .vmux     = SAA7115_SVIDEO3,
 172                         .amux     = 1,
 173                 } },
 174         },
 175         [EM2820_BOARD_HAUPPAUGE_WINTV_USB_2] = {
 176                 .name         = "Hauppauge WinTV USB 2",
 177                 .vchannels    = 3,
 178                 .tuner_type   = TUNER_PHILIPS_FM1236_MK3,
 179                 .tda9887_conf = TDA9887_PRESENT |
 180                                 TDA9887_PORT1_ACTIVE|
 181                                 TDA9887_PORT2_ACTIVE,
 182                 .decoder      = EM28XX_TVP5150,
 183                 .has_msp34xx  = 1,
 184                 /*FIXME: S-Video not tested */
 185                 .input          = { {
 186                         .type     = EM28XX_VMUX_TELEVISION,
 187                         .vmux     = TVP5150_COMPOSITE0,
 188                         .amux     = MSP_INPUT_DEFAULT,
 189                 }, {
 190                         .type     = EM28XX_VMUX_SVIDEO,
 191                         .vmux     = TVP5150_SVIDEO,
 192                         .amux     = MSP_INPUT(MSP_IN_SCART1, MSP_IN_TUNER1,
 193                                         MSP_DSP_IN_SCART, MSP_DSP_IN_SCART),
 194                 } },
 195         },
 196         [EM2820_BOARD_DLINK_USB_TV] = {
 197                 .name         = "D-Link DUB-T210 TV Tuner",
 198                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 199                 .vchannels    = 3,
 200                 .is_em2800    = 0,
 201                 .tuner_type   = TUNER_LG_PAL_NEW_TAPC,
 202                 .tda9887_conf = TDA9887_PRESENT,
 203                 .decoder      = EM28XX_SAA7113,
 204                 .input          = { {
 205                         .type     = EM28XX_VMUX_TELEVISION,
 206                         .vmux     = SAA7115_COMPOSITE2,
 207                         .amux     = 1,
 208                 }, {
 209                         .type     = EM28XX_VMUX_COMPOSITE1,
 210                         .vmux     = SAA7115_COMPOSITE0,
 211                         .amux     = 1,
 212                 }, {
 213                         .type     = EM28XX_VMUX_SVIDEO,
 214                         .vmux     = SAA7115_SVIDEO3,
 215                         .amux     = 1,
 216                 } },
 217         },
 218         [EM2820_BOARD_HERCULES_SMART_TV_USB2] = {
 219                 .name         = "Hercules Smart TV USB 2.0",
 220                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 221                 .vchannels    = 3,
 222                 .tuner_type   = TUNER_LG_PAL_NEW_TAPC,
 223                 .tda9887_conf = TDA9887_PRESENT,
 224                 .decoder      = EM28XX_SAA7113,
 225                 .input        = { {
 226                         .type     = EM28XX_VMUX_TELEVISION,
 227                         .vmux     = SAA7115_COMPOSITE2,
 228                         .amux     = 1,
 229                 }, {
 230                         .type     = EM28XX_VMUX_COMPOSITE1,
 231                         .vmux     = SAA7115_COMPOSITE0,
 232                         .amux     = 1,
 233                 }, {
 234                         .type     = EM28XX_VMUX_SVIDEO,
 235                         .vmux     = SAA7115_SVIDEO3,
 236                         .amux     = 1,
 237                 } },
 238         },
 239         [EM2820_BOARD_PINNACLE_USB_2_FM1216ME] = {
 240                 .name         = "Pinnacle PCTV USB 2 (Philips FM1216ME)",
 241                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 242                 .vchannels    = 3,
 243                 .is_em2800    = 0,
 244                 .tuner_type   = TUNER_PHILIPS_FM1216ME_MK3,
 245                 .tda9887_conf = TDA9887_PRESENT,
 246                 .decoder      = EM28XX_SAA7113,
 247                 .input          = { {
 248                         .type     = EM28XX_VMUX_TELEVISION,
 249                         .vmux     = SAA7115_COMPOSITE2,
 250                         .amux     = 0,
 251                 }, {
 252                         .type     = EM28XX_VMUX_COMPOSITE1,
 253                         .vmux     = SAA7115_COMPOSITE0,
 254                         .amux     = 1,
 255                 }, {
 256                         .type     = EM28XX_VMUX_SVIDEO,
 257                         .vmux     = SAA7115_SVIDEO3,
 258                         .amux     = 1,
 259                 } },
 260         },
 261         [EM2820_BOARD_GADMEI_UTV310] = {
 262                 .name         = "Gadmei UTV310",
 263                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 264                 .vchannels    = 3,
 265                 .tuner_type   = TUNER_TNF_5335MF,
 266                 .tda9887_conf = TDA9887_PRESENT,
 267                 .decoder      = EM28XX_SAA7113,
 268                 .input          = { {
 269                         .type     = EM28XX_VMUX_TELEVISION,
 270                         .vmux     = SAA7115_COMPOSITE1,
 271                         .amux     = 1,
 272                 }, {
 273                         .type     = EM28XX_VMUX_COMPOSITE1,
 274                         .vmux     = SAA7115_COMPOSITE0,
 275                         .amux     = 1,
 276                 }, {
 277                         .type     = EM28XX_VMUX_SVIDEO,
 278                         .vmux     = SAA7115_SVIDEO3,
 279                         .amux     = 1,
 280                 } },
 281         },
 282         [EM2820_BOARD_LEADTEK_WINFAST_USBII_DELUXE] = {
 283                 .name         = "Leadtek Winfast USB II Deluxe",
 284                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 285                 .vchannels    = 3,
 286                 .tuner_type   = TUNER_PHILIPS_FM1216ME_MK3,
 287                 .tda9887_conf = TDA9887_PRESENT,
 288                 .decoder      = EM28XX_SAA7114,
 289                 .input          = { {
 290                         .type     = EM28XX_VMUX_TELEVISION,
 291                         .vmux     = 2,
 292                         .amux     = 0,
 293                 }, {
 294                         .type     = EM28XX_VMUX_COMPOSITE1,
 295                         .vmux     = 0,
 296                         .amux     = 1,
 297                 }, {
 298                         .type     = EM28XX_VMUX_SVIDEO,
 299                         .vmux     = 9,
 300                         .amux     = 1,
 301                 } },
 302         },
 303         [EM2820_BOARD_PINNACLE_DVC_100] = {
 304                 .name         = "Pinnacle Dazzle DVC 100",
 305                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 306                 .vchannels    = 3,
 307                 .decoder      = EM28XX_SAA7113,
 308                 .input          = { {
 309                         .type     = EM28XX_VMUX_COMPOSITE1,
 310                         .vmux     = SAA7115_COMPOSITE0,
 311                         .amux     = 1,
 312                 }, {
 313                         .type     = EM28XX_VMUX_SVIDEO,
 314                         .vmux     = SAA7115_SVIDEO3,
 315                         .amux     = 1,
 316                 } },
 317         },
 318         [EM2820_BOARD_VIDEOLOGY_20K14XUSB] = {
 319                 .name          = "Videology 20K14XUSB USB2.0",
 320                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 321                 .vchannels     = 1,
 322                 .input         = { {
 323                         .type     = EM28XX_VMUX_COMPOSITE1,
 324                         .vmux     = 0,
 325                         .amux     = 0,
 326                 } },
 327         },
 328         [EM2821_BOARD_PROLINK_PLAYTV_USB2] = {
 329                 .name         = "SIIG AVTuner-PVR/Prolink PlayTV USB 2.0",
 330                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 331                 .vchannels    = 3,
 332                 .is_em2800    = 0,
 333                 .tuner_type   = TUNER_LG_PAL_NEW_TAPC,  /* unknown? */
 334                 .tda9887_conf = TDA9887_PRESENT,        /* unknown? */
 335                 .decoder      = EM28XX_SAA7113,
 336                 .input          = { {
 337                         .type     = EM28XX_VMUX_TELEVISION,
 338                         .vmux     = SAA7115_COMPOSITE2,
 339                         .amux     = 1,
 340                 }, {
 341                         .type     = EM28XX_VMUX_COMPOSITE1,
 342                         .vmux     = SAA7115_COMPOSITE0,
 343                         .amux     = 1,
 344                 }, {
 345                         .type     = EM28XX_VMUX_SVIDEO,
 346                         .vmux     = SAA7115_SVIDEO3,
 347                         .amux     = 1,
 348                 } },
 349         },
 350         [EM2821_BOARD_SUPERCOMP_USB_2] = {
 351                 .name         = "Supercomp USB 2.0 TV",
 352                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 353                 .vchannels    = 3,
 354                 .is_em2800    = 0,
 355                 .tuner_type   = TUNER_PHILIPS_FM1236_MK3,
 356                 .tda9887_conf = TDA9887_PRESENT |
 357                                 TDA9887_PORT1_ACTIVE |
 358                                 TDA9887_PORT2_ACTIVE,
 359                 .decoder      = EM28XX_SAA7113,
 360                 .input          = { {
 361                         .type     = EM28XX_VMUX_TELEVISION,
 362                         .vmux     = SAA7115_COMPOSITE2,
 363                         .amux     = 1,
 364                 }, {
 365                         .type     = EM28XX_VMUX_COMPOSITE1,
 366                         .vmux     = SAA7115_COMPOSITE0,
 367                         .amux     = 0,
 368                 }, {
 369                         .type     = EM28XX_VMUX_SVIDEO,
 370                         .vmux     = SAA7115_SVIDEO3,
 371                         .amux     = 1,
 372                 } },
 373         },
 374         [EM2821_BOARD_USBGEAR_VD204] = {
 375                 .name          = "Usbgear VD204v9",
 376                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 377                 .vchannels     = 2,
 378                 .decoder       = EM28XX_SAA7113,
 379                 .input          = { {
 380                         .type  = EM28XX_VMUX_COMPOSITE1,
 381                         .vmux  = SAA7115_COMPOSITE0,
 382                         .amux  = 1,
 383                 }, {
 384                         .type  = EM28XX_VMUX_SVIDEO,
 385                         .vmux  = SAA7115_SVIDEO3,
 386                         .amux  = 1,
 387                 } },
 388         },
 389         [EM2860_BOARD_NETGMBH_CAM] = {
 390                 /* Beijing Huaqi Information Digital Technology Co., Ltd */
 391                 .name          = "NetGMBH Cam",
 392                 .valid       = EM28XX_BOARD_NOT_VALIDATED,
 393                 .vchannels     = 1,
 394                 .input         = { {
 395                         .type     = EM28XX_VMUX_COMPOSITE1,
 396                         .vmux     = 0,
 397                         .amux     = 0,
 398                 } },
 399         },
 400         [EM2860_BOARD_TYPHOON_DVD_MAKER] = {
 401                 .name          = "Typhoon DVD Maker",
 402                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 403                 .vchannels     = 2,
 404                 .decoder       = EM28XX_SAA7113,
 405                 .input          = { {
 406                         .type  = EM28XX_VMUX_COMPOSITE1,
 407                         .vmux  = SAA7115_COMPOSITE0,
 408                         .amux  = 1,
 409                 }, {
 410                         .type  = EM28XX_VMUX_SVIDEO,
 411                         .vmux  = SAA7115_SVIDEO3,
 412                         .amux  = 1,
 413                 } },
 414         },
 415         [EM2860_BOARD_GADMEI_UTV330] = {
 416                 .name         = "Gadmei UTV330",
 417                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 418                 .vchannels    = 3,
 419                 .tuner_type   = TUNER_TNF_5335MF,
 420                 .tda9887_conf = TDA9887_PRESENT,
 421                 .decoder      = EM28XX_SAA7113,
 422                 .input          = { {
 423                         .type     = EM28XX_VMUX_TELEVISION,
 424                         .vmux     = SAA7115_COMPOSITE2,
 425                         .amux     = 0,
 426                 }, {
 427                         .type     = EM28XX_VMUX_COMPOSITE1,
 428                         .vmux     = SAA7115_COMPOSITE0,
 429                         .amux     = 1,
 430                 }, {
 431                         .type     = EM28XX_VMUX_SVIDEO,
 432                         .vmux     = SAA7115_SVIDEO3,
 433                         .amux     = 1,
 434                 } },
 435         },
 436         [EM2860_BOARD_TERRATEC_HYBRID_XS] = {
 437                 .name         = "Terratec Cinergy A Hybrid XS",
 438                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 439                 .vchannels    = 3,
 440                 .tuner_type   = TUNER_XC2028,
 441                 .decoder      = EM28XX_TVP5150,
 442                 .input          = { {
 443                         .type     = EM28XX_VMUX_TELEVISION,
 444                         .vmux     = TVP5150_COMPOSITE0,
 445                         .amux     = 0,
 446                 }, {
 447                         .type     = EM28XX_VMUX_COMPOSITE1,
 448                         .vmux     = TVP5150_COMPOSITE1,
 449                         .amux     = 1,
 450                 }, {
 451                         .type     = EM28XX_VMUX_SVIDEO,
 452                         .vmux     = TVP5150_SVIDEO,
 453                         .amux     = 1,
 454                 } },
 455         },
 456         [EM2861_BOARD_KWORLD_PVRTV_300U] = {
 457                 .name         = "KWorld PVRTV 300U",
 458                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 459                 .vchannels    = 3,
 460                 .tuner_type   = TUNER_XC2028,
 461                 .decoder      = EM28XX_TVP5150,
 462                 .input          = { {
 463                         .type     = EM28XX_VMUX_TELEVISION,
 464                         .vmux     = TVP5150_COMPOSITE0,
 465                         .amux     = 0,
 466                 }, {
 467                         .type     = EM28XX_VMUX_COMPOSITE1,
 468                         .vmux     = TVP5150_COMPOSITE1,
 469                         .amux     = 1,
 470                 }, {
 471                         .type     = EM28XX_VMUX_SVIDEO,
 472                         .vmux     = TVP5150_SVIDEO,
 473                         .amux     = 1,
 474                 } },
 475         },
 476         [EM2861_BOARD_YAKUMO_MOVIE_MIXER] = {
 477                 .name          = "Yakumo MovieMixer",
 478                 .valid       = EM28XX_BOARD_NOT_VALIDATED,
 479                 .vchannels     = 1,
 480                 .decoder       = EM28XX_TVP5150,
 481                 .input         = { {
 482                         .type     = EM28XX_VMUX_TELEVISION,
 483                         .vmux     = TVP5150_COMPOSITE0,
 484                         .amux     = 0,
 485                 }, {
 486                         .type     = EM28XX_VMUX_COMPOSITE1,
 487                         .vmux     = TVP5150_COMPOSITE1,
 488                         .amux     = 1,
 489                 }, {
 490                         .type     = EM28XX_VMUX_SVIDEO,
 491                         .vmux     = TVP5150_SVIDEO,
 492                         .amux     = 1,
 493                 } },
 494         },
 495         [EM2861_BOARD_PLEXTOR_PX_TV100U] = {
 496                 .name         = "Plextor ConvertX PX-TV100U",
 497                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 498                 .vchannels    = 3,
 499                 .tuner_type   = TUNER_TNF_5335MF,
 500                 .tda9887_conf = TDA9887_PRESENT,
 501                 .decoder      = EM28XX_TVP5150,
 502                 .input          = { {
 503                         .type     = EM28XX_VMUX_TELEVISION,
 504                         .vmux     = TVP5150_COMPOSITE0,
 505                         .amux     = 1,
 506                 }, {
 507                         .type     = EM28XX_VMUX_COMPOSITE1,
 508                         .vmux     = TVP5150_COMPOSITE1,
 509                         .amux     = 1,
 510                 }, {
 511                         .type     = EM28XX_VMUX_SVIDEO,
 512                         .vmux     = TVP5150_SVIDEO,
 513                         .amux     = 1,
 514                 } },
 515         },
 516         [EM2870_BOARD_TERRATEC_XS] = {
 517                 .name         = "Terratec Cinergy T XS",
 518                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 519                 .tuner_type   = TUNER_XC2028,
 520         },
 521         [EM2870_BOARD_TERRATEC_XS_MT2060] = {
 522                 .name         = "Terratec Cinergy T XS (MT2060)",
 523                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 524                 .tuner_type   = TUNER_ABSENT, /* MT2060 */
 525         },
 526         [EM2870_BOARD_KWORLD_350U] = {
 527                 .name         = "Kworld 350 U DVB-T",
 528                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 529                 .tuner_type   = TUNER_XC2028,
 530         },
 531         [EM2870_BOARD_KWORLD_355U] = {
 532                 .name         = "Kworld 355 U DVB-T",
 533                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 534         },
 535         [EM2870_BOARD_PINNACLE_PCTV_DVB] = {
 536                 .name         = "Pinnacle PCTV DVB-T",
 537                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 538                 .tuner_type   = TUNER_ABSENT, /* MT2060 */
 539         },
 540         [EM2870_BOARD_COMPRO_VIDEOMATE] = {
 541                 .name         = "Compro, VideoMate U3",
 542                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 543                 .tuner_type   = TUNER_ABSENT, /* MT2060 */
 544         },
 545         [EM2880_BOARD_TERRATEC_HYBRID_XS_FR] = {
 546                 .name         = "Terratec Hybrid XS Secam",
 547                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 548                 .vchannels    = 3,
 549                 .has_msp34xx  = 1,
 550                 .tuner_type   = TUNER_XC2028,
 551                 .decoder      = EM28XX_TVP5150,
 552                 .input          = { {
 553                         .type     = EM28XX_VMUX_TELEVISION,
 554                         .vmux     = TVP5150_COMPOSITE0,
 555                         .amux     = 0,
 556                 }, {
 557                         .type     = EM28XX_VMUX_COMPOSITE1,
 558                         .vmux     = TVP5150_COMPOSITE1,
 559                         .amux     = 1,
 560                 }, {
 561                         .type     = EM28XX_VMUX_SVIDEO,
 562                         .vmux     = TVP5150_SVIDEO,
 563                         .amux     = 1,
 564                 } },
 565         },
 566         [EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900] = {
 567                 .name         = "Hauppauge WinTV HVR 900",
 568                 .vchannels    = 3,
 569                 .tda9887_conf = TDA9887_PRESENT,
 570                 .tuner_type   = TUNER_XC2028,
 571                 .mts_firmware = 1,
 572                 .has_dvb        = 1,
 573                 .decoder      = EM28XX_TVP5150,
 574                 .input          = { {
 575                         .type     = EM28XX_VMUX_TELEVISION,
 576                         .vmux     = TVP5150_COMPOSITE0,
 577                         .amux     = 0,
 578                 }, {
 579                         .type     = EM28XX_VMUX_COMPOSITE1,
 580                         .vmux     = TVP5150_COMPOSITE1,
 581                         .amux     = 1,
 582                 }, {
 583                         .type     = EM28XX_VMUX_SVIDEO,
 584                         .vmux     = TVP5150_SVIDEO,
 585                         .amux     = 1,
 586                 } },
 587         },
 588         [EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2] = {
 589                 .name         = "Hauppauge WinTV HVR 900 (R2)",
 590                 .vchannels    = 3,
 591                 .tda9887_conf = TDA9887_PRESENT,
 592                 .tuner_type   = TUNER_XC2028,
 593                 .mts_firmware = 1,
 594                 .decoder      = EM28XX_TVP5150,
 595                 .input          = { {
 596                         .type     = EM28XX_VMUX_TELEVISION,
 597                         .vmux     = TVP5150_COMPOSITE0,
 598                         .amux     = 0,
 599                 }, {
 600                         .type     = EM28XX_VMUX_COMPOSITE1,
 601                         .vmux     = TVP5150_COMPOSITE1,
 602                         .amux     = 1,
 603                 }, {
 604                         .type     = EM28XX_VMUX_SVIDEO,
 605                         .vmux     = TVP5150_SVIDEO,
 606                         .amux     = 1,
 607                 } },
 608         },
 609         [EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950] = {
 610                 .name           = "Hauppauge WinTV HVR 950",
 611                 .vchannels      = 3,
 612                 .tda9887_conf   = TDA9887_PRESENT,
 613                 .tuner_type     = TUNER_XC2028,
 614                 .mts_firmware   = 1,
 615                 .has_12mhz_i2s  = 1,
 616                 .has_dvb        = 1,
 617                 .decoder        = EM28XX_TVP5150,
 618                 .input          = { {
 619                         .type     = EM28XX_VMUX_TELEVISION,
 620                         .vmux     = TVP5150_COMPOSITE0,
 621                         .amux     = 0,
 622                 }, {
 623                         .type     = EM28XX_VMUX_COMPOSITE1,
 624                         .vmux     = TVP5150_COMPOSITE1,
 625                         .amux     = 1,
 626                 }, {
 627                         .type     = EM28XX_VMUX_SVIDEO,
 628                         .vmux     = TVP5150_SVIDEO,
 629                         .amux     = 1,
 630                 } },
 631         },
 632         [EM2880_BOARD_PINNACLE_PCTV_HD_PRO] = {
 633                 .name           = "Pinnacle PCTV HD Pro Stick",
 634                 .vchannels      = 3,
 635                 .tda9887_conf   = TDA9887_PRESENT,
 636                 .tuner_type     = TUNER_XC2028,
 637                 .mts_firmware   = 1,
 638                 .has_12mhz_i2s  = 1,
 639                 .has_dvb        = 1,
 640                 .decoder        = EM28XX_TVP5150,
 641                 .input          = { {
 642                         .type     = EM28XX_VMUX_TELEVISION,
 643                         .vmux     = TVP5150_COMPOSITE0,
 644                         .amux     = 0,
 645                 }, {
 646                         .type     = EM28XX_VMUX_COMPOSITE1,
 647                         .vmux     = TVP5150_COMPOSITE1,
 648                         .amux     = 1,
 649                 }, {
 650                         .type     = EM28XX_VMUX_SVIDEO,
 651                         .vmux     = TVP5150_SVIDEO,
 652                         .amux     = 1,
 653                 } },
 654         },
 655         [EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600] = {
 656                 .name           = "AMD ATI TV Wonder HD 600",
 657                 .vchannels      = 3,
 658                 .tda9887_conf   = TDA9887_PRESENT,
 659                 .tuner_type     = TUNER_XC2028,
 660                 .mts_firmware   = 1,
 661                 .has_12mhz_i2s  = 1,
 662                 .has_dvb        = 1,
 663                 .decoder        = EM28XX_TVP5150,
 664                 .input          = { {
 665                         .type     = EM28XX_VMUX_TELEVISION,
 666                         .vmux     = TVP5150_COMPOSITE0,
 667                         .amux     = 0,
 668                 }, {
 669                         .type     = EM28XX_VMUX_COMPOSITE1,
 670                         .vmux     = TVP5150_COMPOSITE1,
 671                         .amux     = 1,
 672                 }, {
 673                         .type     = EM28XX_VMUX_SVIDEO,
 674                         .vmux     = TVP5150_SVIDEO,
 675                         .amux     = 1,
 676                 } },
 677         },
 678         [EM2880_BOARD_TERRATEC_HYBRID_XS] = {
 679                 .name         = "Terratec Hybrid XS",
 680                 .vchannels    = 3,
 681                 .tda9887_conf = TDA9887_PRESENT,
 682                 .tuner_type   = TUNER_XC2028,
 683                 .decoder      = EM28XX_TVP5150,
 684                 .has_dvb        = 1,
 685                 .input          = { {
 686                         .type     = EM28XX_VMUX_TELEVISION,
 687                         .vmux     = TVP5150_COMPOSITE0,
 688                         .amux     = 0,
 689                 }, {
 690                         .type     = EM28XX_VMUX_COMPOSITE1,
 691                         .vmux     = TVP5150_COMPOSITE1,
 692                         .amux     = 1,
 693                 }, {
 694                         .type     = EM28XX_VMUX_SVIDEO,
 695                         .vmux     = TVP5150_SVIDEO,
 696                         .amux     = 1,
 697                 } },
 698         },
 699         /* maybe there's a reason behind it why Terratec sells the Hybrid XS
 700            as Prodigy XS with a different PID, let's keep it separated for now
 701            maybe we'll need it lateron */
 702         [EM2880_BOARD_TERRATEC_PRODIGY_XS] = {
 703                 .name         = "Terratec Prodigy XS",
 704                 .vchannels    = 3,
 705                 .tda9887_conf = TDA9887_PRESENT,
 706                 .tuner_type   = TUNER_XC2028,
 707                 .decoder      = EM28XX_TVP5150,
 708                 .input          = { {
 709                         .type     = EM28XX_VMUX_TELEVISION,
 710                         .vmux     = TVP5150_COMPOSITE0,
 711                         .amux     = 0,
 712                 }, {
 713                         .type     = EM28XX_VMUX_COMPOSITE1,
 714                         .vmux     = TVP5150_COMPOSITE1,
 715                         .amux     = 1,
 716                 }, {
 717                         .type     = EM28XX_VMUX_SVIDEO,
 718                         .vmux     = TVP5150_SVIDEO,
 719                         .amux     = 1,
 720                 } },
 721         },
 722         [EM2820_BOARD_MSI_VOX_USB_2] = {
 723                 .name              = "MSI VOX USB 2.0",
 724                 .vchannels         = 3,
 725                 .tuner_type        = TUNER_LG_PAL_NEW_TAPC,
 726                 .tda9887_conf      = TDA9887_PRESENT      |
 727                                      TDA9887_PORT1_ACTIVE |
 728                                      TDA9887_PORT2_ACTIVE,
 729                 .max_range_640_480 = 1,
 730
 731                 .decoder           = EM28XX_SAA7114,
 732                 .input             = { {
 733                         .type      = EM28XX_VMUX_TELEVISION,
 734                         .vmux      = SAA7115_COMPOSITE4,
 735                         .amux      = 0,
 736                 }, {
 737                         .type      = EM28XX_VMUX_COMPOSITE1,
 738                         .vmux      = SAA7115_COMPOSITE0,
 739                         .amux      = 1,
 740                 }, {
 741                         .type      = EM28XX_VMUX_SVIDEO,
 742                         .vmux      = SAA7115_SVIDEO3,
 743                         .amux      = 1,
 744                 } },
 745         },
 746         [EM2800_BOARD_TERRATEC_CINERGY_200] = {
 747                 .name         = "Terratec Cinergy 200 USB",
 748                 .is_em2800    = 1,
 749                 .vchannels    = 3,
 750                 .tuner_type   = TUNER_LG_PAL_NEW_TAPC,
 751                 .tda9887_conf = TDA9887_PRESENT,
 752                 .decoder      = EM28XX_SAA7113,
 753                 .input          = { {
 754                         .type     = EM28XX_VMUX_TELEVISION,
 755                         .vmux     = SAA7115_COMPOSITE2,
 756                         .amux     = 0,
 757                 }, {
 758                         .type     = EM28XX_VMUX_COMPOSITE1,
 759                         .vmux     = SAA7115_COMPOSITE0,
 760                         .amux     = 1,
 761                 }, {
 762                         .type     = EM28XX_VMUX_SVIDEO,
 763                         .vmux     = SAA7115_SVIDEO3,
 764                         .amux     = 1,
 765                 } },
 766         },
 767         [EM2800_BOARD_GRABBEEX_USB2800] = {
 768                 .name         = "eMPIA Technology, Inc. GrabBeeX+ Video Encoder",
 769                 .is_em2800    = 1,
 770                 .vchannels    = 2,
 771                 .decoder      = EM28XX_SAA7113,
 772                 .input          = { {
 773                         .type     = EM28XX_VMUX_COMPOSITE1,
 774                         .vmux     = SAA7115_COMPOSITE0,
 775                         .amux     = 1,
 776                 }, {
 777                         .type     = EM28XX_VMUX_SVIDEO,
 778                         .vmux     = SAA7115_SVIDEO3,
 779                         .amux     = 1,
 780                 } },
 781         },
 782         [EM2800_BOARD_LEADTEK_WINFAST_USBII] = {
 783                 .name         = "Leadtek Winfast USB II",
 784                 .is_em2800    = 1,
 785                 .vchannels    = 3,
 786                 .tuner_type   = TUNER_LG_PAL_NEW_TAPC,
 787                 .tda9887_conf = TDA9887_PRESENT,
 788                 .decoder      = EM28XX_SAA7113,
 789                 .input          = { {
 790                         .type     = EM28XX_VMUX_TELEVISION,
 791                         .vmux     = SAA7115_COMPOSITE2,
 792                         .amux     = 0,
 793                 }, {
 794                         .type     = EM28XX_VMUX_COMPOSITE1,
 795                         .vmux     = SAA7115_COMPOSITE0,
 796                         .amux     = 1,
 797                 }, {
 798                         .type     = EM28XX_VMUX_SVIDEO,
 799                         .vmux     = SAA7115_SVIDEO3,
 800                         .amux     = 1,
 801                 } },
 802         },
 803         [EM2800_BOARD_KWORLD_USB2800] = {
 804                 .name         = "Kworld USB2800",
 805                 .is_em2800    = 1,
 806                 .vchannels    = 3,
 807                 .tuner_type   = TUNER_PHILIPS_FCV1236D,
 808                 .tda9887_conf = TDA9887_PRESENT,
 809                 .decoder      = EM28XX_SAA7113,
 810                 .input          = { {
 811                         .type     = EM28XX_VMUX_TELEVISION,
 812                         .vmux     = SAA7115_COMPOSITE2,
 813                         .amux     = 0,
 814                 }, {
 815                         .type     = EM28XX_VMUX_COMPOSITE1,
 816                         .vmux     = SAA7115_COMPOSITE0,
 817                         .amux     = 1,
 818                 }, {
 819                         .type     = EM28XX_VMUX_SVIDEO,
 820                         .vmux     = SAA7115_SVIDEO3,
 821                         .amux     = 1,
 822                 } },
 823         },
 824         [EM2820_BOARD_PINNACLE_DVC_90] = {
 825                 .name         = "Pinnacle Dazzle DVC 90/DVC 100",
 826                 .vchannels    = 3,
 827                 .tuner_type   = TUNER_ABSENT,
 828                 .decoder      = EM28XX_SAA7113,
 829                 .input          = { {
 830                         .type     = EM28XX_VMUX_COMPOSITE1,
 831                         .vmux     = SAA7115_COMPOSITE0,
 832                         .amux     = 1,
 833                 }, {
 834                         .type     = EM28XX_VMUX_SVIDEO,
 835                         .vmux     = SAA7115_SVIDEO3,
 836                         .amux     = 1,
 837                 } },
 838         },
 839         [EM2800_BOARD_VGEAR_POCKETTV] = {
 840                 .name         = "V-Gear PocketTV",
 841                 .is_em2800    = 1,
 842                 .vchannels    = 3,
 843                 .tuner_type   = TUNER_LG_PAL_NEW_TAPC,
 844                 .tda9887_conf = TDA9887_PRESENT,
 845                 .decoder      = EM28XX_SAA7113,
 846                 .input          = { {
 847                         .type     = EM28XX_VMUX_TELEVISION,
 848                         .vmux     = SAA7115_COMPOSITE2,
 849                         .amux     = 0,
 850                 }, {
 851                         .type     = EM28XX_VMUX_COMPOSITE1,
 852                         .vmux     = SAA7115_COMPOSITE0,
 853                         .amux     = 1,
 854                 }, {
 855                         .type     = EM28XX_VMUX_SVIDEO,
 856                         .vmux     = SAA7115_SVIDEO3,
 857                         .amux     = 1,
 858                 } },
 859         },
 860         [EM2820_BOARD_PROLINK_PLAYTV_USB2] = {
 861                 .name         = "Pixelview Prolink PlayTV USB 2.0",
 862                 .vchannels    = 3,
 863                 .tda9887_conf = TDA9887_PRESENT,
 864                 .tuner_type   = TUNER_YMEC_TVF_5533MF,
 865                 .decoder      = EM28XX_SAA7113,
 866                 .input          = { {
 867                         .type     = EM28XX_VMUX_TELEVISION,
 868                         .vmux     = SAA7115_COMPOSITE2,
 869                         .amux     = EM28XX_AMUX_LINE_IN,
 870                 }, {
 871                         .type     = EM28XX_VMUX_COMPOSITE1,
 872                         .vmux     = SAA7115_COMPOSITE0,
 873                         .amux     = EM28XX_AMUX_LINE_IN,
 874                 }, {
 875                         .type     = EM28XX_VMUX_SVIDEO,
 876                         .vmux     = SAA7115_SVIDEO3,
 877                         .amux     = EM28XX_AMUX_LINE_IN,
 878                 } },
 879         },
 880         [EM2860_BOARD_POINTNIX_INTRAORAL_CAMERA] = {
 881                 .name         = "PointNix Intra-Oral Camera",
 882                 .has_snapshot_button = 1,
 883                 .vchannels    = 1,
 884                 .tda9887_conf = TDA9887_PRESENT,
 885                 .tuner_type   = TUNER_ABSENT,
 886                 .decoder      = EM28XX_SAA7113,
 887                 .input          = { {
 888                         .type     = EM28XX_VMUX_SVIDEO,
 889                         .vmux     = SAA7115_SVIDEO3,
 890                         .amux     = 0,
 891                 } },
 892         },
 893         [EM2880_BOARD_MSI_DIGIVOX_AD] = {
 894                 .name         = "MSI DigiVox A/D",
 895                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 896                 .vchannels    = 3,
 897                 .tuner_type   = TUNER_XC2028,
 898                 .decoder      = EM28XX_TVP5150,
 899                 .input          = { {
 900                         .type     = EM28XX_VMUX_TELEVISION,
 901                         .vmux     = TVP5150_COMPOSITE0,
 902                         .amux     = 0,
 903                 }, {
 904                         .type     = EM28XX_VMUX_COMPOSITE1,
 905                         .vmux     = TVP5150_COMPOSITE1,
 906                         .amux     = 1,
 907                 }, {
 908                         .type     = EM28XX_VMUX_SVIDEO,
 909                         .vmux     = TVP5150_SVIDEO,
 910                         .amux     = 1,
 911                 } },
 912         },
 913         [EM2880_BOARD_MSI_DIGIVOX_AD_II] = {
 914                 .name         = "MSI DigiVox A/D II",
 915                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 916                 .vchannels    = 3,
 917                 .tuner_type   = TUNER_XC2028,
 918                 .decoder      = EM28XX_TVP5150,
 919                 .input          = { {
 920                         .type     = EM28XX_VMUX_TELEVISION,
 921                         .vmux     = TVP5150_COMPOSITE0,
 922                         .amux     = 0,
 923                 }, {
 924                         .type     = EM28XX_VMUX_COMPOSITE1,
 925                         .vmux     = TVP5150_COMPOSITE1,
 926                         .amux     = 1,
 927                 }, {
 928                         .type     = EM28XX_VMUX_SVIDEO,
 929                         .vmux     = TVP5150_SVIDEO,
 930                         .amux     = 1,
 931                 } },
 932         },
 933         [EM2880_BOARD_KWORLD_DVB_305U] = {
 934                 .name         = "KWorld DVB-T 305U",
 935                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 936                 .vchannels    = 3,
 937                 .tuner_type   = TUNER_XC2028,
 938                 .decoder      = EM28XX_TVP5150,
 939                 .input          = { {
 940                         .type     = EM28XX_VMUX_TELEVISION,
 941                         .vmux     = TVP5150_COMPOSITE0,
 942                         .amux     = 0,
 943                 }, {
 944                         .type     = EM28XX_VMUX_COMPOSITE1,
 945                         .vmux     = TVP5150_COMPOSITE1,
 946                         .amux     = 1,
 947                 }, {
 948                         .type     = EM28XX_VMUX_SVIDEO,
 949                         .vmux     = TVP5150_SVIDEO,
 950                         .amux     = 1,
 951                 } },
 952         },
 953         [EM2880_BOARD_KWORLD_DVB_310U] = {
 954                 .name         = "KWorld DVB-T 310U",
 955                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 956                 .vchannels    = 3,
 957                 .tuner_type   = TUNER_XC2028,
 958                 .decoder      = EM28XX_TVP5150,
 959                 .input          = { {
 960                         .type     = EM28XX_VMUX_TELEVISION,
 961                         .vmux     = TVP5150_COMPOSITE0,
 962                         .amux     = 0,
 963                 }, {
 964                         .type     = EM28XX_VMUX_COMPOSITE1,
 965                         .vmux     = TVP5150_COMPOSITE1,
 966                         .amux     = 1,
 967                 }, {
 968                         .type     = EM28XX_VMUX_SVIDEO,
 969                         .vmux     = TVP5150_SVIDEO,
 970                         .amux     = 1,
 971                 } },
 972         },
 973         [EM2881_BOARD_DNT_DA2_HYBRID] = {
 974                 .name         = "DNT DA2 Hybrid",
 975                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 976                 .vchannels    = 3,
 977                 .tuner_type   = TUNER_XC2028,
 978                 .decoder      = EM28XX_TVP5150,
 979                 .input          = { {
 980                         .type     = EM28XX_VMUX_TELEVISION,
 981                         .vmux     = TVP5150_COMPOSITE0,
 982                         .amux     = 0,
 983                 }, {
 984                         .type     = EM28XX_VMUX_COMPOSITE1,
 985                         .vmux     = TVP5150_COMPOSITE1,
 986                         .amux     = 1,
 987                 }, {
 988                         .type     = EM28XX_VMUX_SVIDEO,
 989                         .vmux     = TVP5150_SVIDEO,
 990                         .amux     = 1,
 991                 } },
 992         },
 993         [EM2881_BOARD_PINNACLE_HYBRID_PRO] = {
 994                 .name         = "Pinnacle Hybrid Pro",
 995                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 996                 .vchannels    = 3,
 997                 .tuner_type   = TUNER_XC2028,
 998                 .decoder      = EM28XX_TVP5150,
 999                 .input          = { {
1000                         .type     = EM28XX_VMUX_TELEVISION,
1001                         .vmux     = TVP5150_COMPOSITE0,
1002                         .amux     = 0,
1003                 }, {
1004                         .type     = EM28XX_VMUX_COMPOSITE1,
1005                         .vmux     = TVP5150_COMPOSITE1,
1006                         .amux     = 1,
1007                 }, {
1008                         .type     = EM28XX_VMUX_SVIDEO,
1009                         .vmux     = TVP5150_SVIDEO,
1010                         .amux     = 1,
1011                 } },
1012         },
1013         [EM2882_BOARD_PINNACLE_HYBRID_PRO] = {
1014                 .name         = "Pinnacle Hybrid Pro (2)",
1015                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
1016                 .vchannels    = 3,
1017                 .tuner_type   = TUNER_XC2028,
1018                 .mts_firmware = 1,
1019                 .decoder      = EM28XX_TVP5150,
1020                 .input          = { {
1021                         .type     = EM28XX_VMUX_TELEVISION,
1022                         .vmux     = TVP5150_COMPOSITE0,
1023                         .amux     = 0,
1024                 }, {
1025                         .type     = EM28XX_VMUX_COMPOSITE1,
1026                         .vmux     = TVP5150_COMPOSITE1,
1027                         .amux     = 1,
1028                 }, {
1029                         .type     = EM28XX_VMUX_SVIDEO,
1030                         .vmux     = TVP5150_SVIDEO,
1031                         .amux     = 1,
1032                 } },
1033         },
1034         [EM2882_BOARD_KWORLD_VS_DVBT] = {
1035                 .name         = "Kworld VS-DVB-T 323UR",
1036                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
1037                 .vchannels    = 3,
1038                 .tuner_type   = TUNER_XC2028,
1039                 .decoder      = EM28XX_TVP5150,
1040                 .input          = { {
1041                         .type     = EM28XX_VMUX_TELEVISION,
1042                         .vmux     = TVP5150_COMPOSITE0,
1043                         .amux     = 0,
1044                 }, {
1045                         .type     = EM28XX_VMUX_COMPOSITE1,
1046                         .vmux     = TVP5150_COMPOSITE1,
1047                         .amux     = 1,
1048                 }, {
1049                         .type     = EM28XX_VMUX_SVIDEO,
1050                         .vmux     = TVP5150_SVIDEO,
1051                         .amux     = 1,
1052                 } },
1053         },
1054         [EM2882_BOARD_TERRATEC_HYBRID_XS] = {
1055                 .name         = "Terratec Hybrid XS (em2882)",
1056                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
1057                 .vchannels    = 3,
1058                 .tuner_type   = TUNER_XC2028,
1059                 .decoder      = EM28XX_TVP5150,
1060                 .input          = { {
1061                         .type     = EM28XX_VMUX_TELEVISION,
1062                         .vmux     = TVP5150_COMPOSITE0,
1063                         .amux     = 0,
1064                 }, {
1065                         .type     = EM28XX_VMUX_COMPOSITE1,
1066                         .vmux     = TVP5150_COMPOSITE1,
1067                         .amux     = 1,
1068                 }, {
1069                         .type     = EM28XX_VMUX_SVIDEO,
1070                         .vmux     = TVP5150_SVIDEO,
1071                         .amux     = 1,
1072                 } },
1073         },
1074         [EM2883_BOARD_KWORLD_HYBRID_A316] = {
1075                 .name         = "Kworld PlusTV HD Hybrid 330",
1076                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
1077                 .vchannels    = 3,
1078                 .is_em2800    = 0,
1079                 .tuner_type   = TUNER_XC2028,
1080                 .decoder      = EM28XX_TVP5150,
1081                 .input          = { {
1082                         .type     = EM28XX_VMUX_TELEVISION,
1083                         .vmux     = TVP5150_COMPOSITE0,
1084                         .amux     = 0,
1085                 }, {
1086                         .type     = EM28XX_VMUX_COMPOSITE1,
1087                         .vmux     = TVP5150_COMPOSITE1,
1088                         .amux     = 1,
1089                 }, {
1090                         .type     = EM28XX_VMUX_SVIDEO,
1091                         .vmux     = TVP5150_SVIDEO,
1092                         .amux     = 1,
1093                 } },
1094         },
1095         [EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU] = {
1096                 .name         = "Compro VideoMate ForYou/Stereo",
1097                 .vchannels    = 2,
1098                 .tuner_type   = TUNER_LG_PAL_NEW_TAPC,
1099                 .tda9887_conf = TDA9887_PRESENT,
1100                 .decoder      = EM28XX_TVP5150,
1101                 .input          = { {
1102                         .type     = EM28XX_VMUX_TELEVISION,
1103                         .vmux     = TVP5150_COMPOSITE0,
1104                         .amux     = EM28XX_AMUX_LINE_IN,
1105                 }, {
1106                         .type     = EM28XX_VMUX_SVIDEO,
1107                         .vmux     = TVP5150_SVIDEO,
1108                         .amux     = EM28XX_AMUX_LINE_IN,
1109                 } },
1110         },
1111 };
1112 const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards);
1113
1114 /* table of devices that work with this driver */
1115 struct usb_device_id em28xx_id_table [] = {
1116         { USB_DEVICE(0xeb1a, 0x2750),
1117                         .driver_info = EM2750_BOARD_UNKNOWN },
1118         { USB_DEVICE(0xeb1a, 0x2751),
1119                         .driver_info = EM2750_BOARD_UNKNOWN },
1120         { USB_DEVICE(0xeb1a, 0x2800),
1121                         .driver_info = EM2800_BOARD_UNKNOWN },
1122         { USB_DEVICE(0xeb1a, 0x2820),
1123                         .driver_info = EM2820_BOARD_UNKNOWN },
1124         { USB_DEVICE(0xeb1a, 0x2821),
1125                         .driver_info = EM2820_BOARD_UNKNOWN },
1126         { USB_DEVICE(0xeb1a, 0x2860),
1127                         .driver_info = EM2820_BOARD_UNKNOWN },
1128         { USB_DEVICE(0xeb1a, 0x2861),
1129                         .driver_info = EM2820_BOARD_UNKNOWN },
1130         { USB_DEVICE(0xeb1a, 0x2870),
1131                         .driver_info = EM2820_BOARD_UNKNOWN },
1132         { USB_DEVICE(0xeb1a, 0x2881),
1133                         .driver_info = EM2820_BOARD_UNKNOWN },
1134         { USB_DEVICE(0xeb1a, 0x2883),
1135                         .driver_info = EM2820_BOARD_UNKNOWN },
1136         { USB_DEVICE(0xeb1a, 0xe300),
1137                         .driver_info = EM2861_BOARD_KWORLD_PVRTV_300U },
1138         { USB_DEVICE(0xeb1a, 0xe305),
1139                         .driver_info = EM2880_BOARD_KWORLD_DVB_305U },
1140         { USB_DEVICE(0xeb1a, 0xe310),
1141                         .driver_info = EM2880_BOARD_MSI_DIGIVOX_AD },
1142         { USB_DEVICE(0xeb1a, 0xa316),
1143                         .driver_info = EM2883_BOARD_KWORLD_HYBRID_A316 },
1144         { USB_DEVICE(0xeb1a, 0xe320),
1145                         .driver_info = EM2880_BOARD_MSI_DIGIVOX_AD_II },
1146         { USB_DEVICE(0xeb1a, 0xe323),
1147                         .driver_info = EM2882_BOARD_KWORLD_VS_DVBT },
1148         { USB_DEVICE(0xeb1a, 0xe350),
1149                         .driver_info = EM2870_BOARD_KWORLD_350U },
1150         { USB_DEVICE(0xeb1a, 0xe355),
1151                         .driver_info = EM2870_BOARD_KWORLD_355U },
1152         { USB_DEVICE(0xeb1a, 0x2801),
1153                         .driver_info = EM2800_BOARD_GRABBEEX_USB2800 },
1154         { USB_DEVICE(0xeb1a, 0xe357),
1155                         .driver_info = EM2870_BOARD_KWORLD_355U },
1156         { USB_DEVICE(0x0ccd, 0x0036),
1157                         .driver_info = EM2820_BOARD_TERRATEC_CINERGY_250 },
1158         { USB_DEVICE(0x0ccd, 0x004c),
1159                         .driver_info = EM2880_BOARD_TERRATEC_HYBRID_XS_FR },
1160         { USB_DEVICE(0x0ccd, 0x004f),
1161                         .driver_info = EM2860_BOARD_TERRATEC_HYBRID_XS },
1162         { USB_DEVICE(0x0ccd, 0x005e),
1163                         .driver_info = EM2882_BOARD_TERRATEC_HYBRID_XS },
1164         { USB_DEVICE(0x0ccd, 0x0042),
1165                         .driver_info = EM2880_BOARD_TERRATEC_HYBRID_XS },
1166         { USB_DEVICE(0x0ccd, 0x0043),
1167                         .driver_info = EM2870_BOARD_TERRATEC_XS },
1168         { USB_DEVICE(0x0ccd, 0x0047),
1169                         .driver_info = EM2880_BOARD_TERRATEC_PRODIGY_XS },
1170         { USB_DEVICE(0x185b, 0x2870),
1171                         .driver_info = EM2870_BOARD_COMPRO_VIDEOMATE },
1172         { USB_DEVICE(0x185b, 0x2041),
1173                         .driver_info = EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU },
1174         { USB_DEVICE(0x2040, 0x4200),
1175                         .driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 },
1176         { USB_DEVICE(0x2040, 0x4201),
1177                         .driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 },
1178         { USB_DEVICE(0x2040, 0x6500),
1179                         .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900 },
1180         { USB_DEVICE(0x2040, 0x6502),
1181                         .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2 },
1182         { USB_DEVICE(0x2040, 0x6513), /* HCW HVR-980 */
1183                         .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
1184         { USB_DEVICE(0x2040, 0x6517), /* HP  HVR-950 */
1185                         .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
1186         { USB_DEVICE(0x2040, 0x651b), /* RP  HVR-950 */
1187                         .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
1188         { USB_DEVICE(0x2040, 0x651f), /* HCW HVR-850 */
1189                         .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
1190         { USB_DEVICE(0x0438, 0xb002),
1191                         .driver_info = EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600 },
1192         { USB_DEVICE(0x2001, 0xf112),
1193                         .driver_info = EM2820_BOARD_DLINK_USB_TV },
1194         { USB_DEVICE(0x2304, 0x0207),
1195                         .driver_info = EM2820_BOARD_PINNACLE_DVC_90 },
1196         { USB_DEVICE(0x2304, 0x0208),
1197                         .driver_info = EM2820_BOARD_PINNACLE_USB_2 },
1198         { USB_DEVICE(0x2304, 0x021a),
1199                         .driver_info = EM2820_BOARD_PINNACLE_DVC_90 },
1200         { USB_DEVICE(0x2304, 0x0226),
1201                         .driver_info = EM2882_BOARD_PINNACLE_HYBRID_PRO },
1202         { USB_DEVICE(0x2304, 0x0227),
1203                         .driver_info = EM2880_BOARD_PINNACLE_PCTV_HD_PRO },
1204         { USB_DEVICE(0x0413, 0x6023),
1205                         .driver_info = EM2800_BOARD_LEADTEK_WINFAST_USBII },
1206         { USB_DEVICE(0x093b, 0xa005),
1207                         .driver_info = EM2861_BOARD_PLEXTOR_PX_TV100U },
1208         { },
1209 };
1210 MODULE_DEVICE_TABLE(usb, em28xx_id_table);
1211
1212 /*
1213  *  Reset sequences for analog/digital modes
1214  */
1215
1216 /* Reset for the most [analog] boards */
1217 static struct em28xx_reg_seq default_analog[] = {
1218         {EM28XX_R08_GPIO,       0x6d,   ~EM_GPIO_4,     10},
1219         {       -1,             -1,     -1,             -1},
1220 };
1221
1222 /* Reset for the most [digital] boards */
1223 static struct em28xx_reg_seq default_digital[] = {
1224         {EM28XX_R08_GPIO,       0x6e,   ~EM_GPIO_4,     10},
1225         {       -1,             -1,     -1,             -1},
1226 };
1227
1228 /* Board Hauppauge WinTV HVR 900 analog */
1229 static struct em28xx_reg_seq hauppauge_wintv_hvr_900_analog[] = {
1230         {EM28XX_R08_GPIO,       0x2d,   ~EM_GPIO_4,     10},
1231         {0x05,                  0xff,   0x10,           10},
1232         {  -1,                  -1,     -1,             -1},
1233 };
1234
1235 /* Board Hauppauge WinTV HVR 900 digital */
1236 static struct em28xx_reg_seq hauppauge_wintv_hvr_900_digital[] = {
1237         {EM28XX_R08_GPIO,       0x2e,   ~EM_GPIO_4,     10},
1238         {EM2880_R04_GPO,        0x04,   0x0f,           10},
1239         {EM2880_R04_GPO,        0x0c,   0x0f,           10},
1240         { -1,                   -1,     -1,             -1},
1241 };
1242
1243 /* Boards - EM2880 MSI DIGIVOX AD and EM2880_BOARD_MSI_DIGIVOX_AD_II */
1244 static struct em28xx_reg_seq em2880_msi_digivox_ad_analog[] = {
1245         {EM28XX_R08_GPIO,       0x69,   ~EM_GPIO_4,      10},
1246         {       -1,             -1,     -1,              -1},
1247 };
1248
1249 /* Boards - EM2880 MSI DIGIVOX AD and EM2880_BOARD_MSI_DIGIVOX_AD_II */
1250 static struct em28xx_reg_seq em2880_msi_digivox_ad_digital[] = {
1251         {EM28XX_R08_GPIO,       0x6a,   ~EM_GPIO_4,     10},
1252         {       -1,             -1,     -1,             -1},
1253 };
1254
1255 /* Board  - EM2870 Kworld 355u
1256    Analog - No input analog */
1257 static struct em28xx_reg_seq em2870_kworld_355u_digital[] = {
1258         {EM2880_R04_GPO,        0x01,   0xff,           10},
1259         {  -1,                  -1,     -1,             -1},
1260 };
1261
1262 /* Callback for the most boards */
1263 static struct em28xx_reg_seq default_callback[] = {
1264         {EM28XX_R08_GPIO,       EM_GPIO_4,      EM_GPIO_4,      10},
1265         {EM28XX_R08_GPIO,       0,              EM_GPIO_4,      10},
1266         {EM28XX_R08_GPIO,       EM_GPIO_4,      EM_GPIO_4,      10},
1267         {  -1,                  -1,             -1,             -1},
1268 };
1269
1270 /* Callback for EM2882 TERRATEC HYBRID XS */
1271 static struct em28xx_reg_seq em2882_terratec_hybrid_xs_digital[] = {
1272         {EM28XX_R08_GPIO,       0x2e,   0xff,              6},
1273         {EM28XX_R08_GPIO,       0x3e,   ~EM_GPIO_4,        6},
1274         {EM2880_R04_GPO,        0x04,   0xff,             10},
1275         {EM2880_R04_GPO,        0x0c,   0xff,             10},
1276         {  -1,                  -1,     -1,               -1},
1277 };
1278
1279 /*
1280  * EEPROM hash table for devices with generic USB IDs
1281  */
1282 static struct em28xx_hash_table em28xx_eeprom_hash [] = {
1283         /* P/N: SA 60002070465 Tuner: TVF7533-MF */
1284         {0x6ce05a8f, EM2820_BOARD_PROLINK_PLAYTV_USB2, TUNER_YMEC_TVF_5533MF},
1285 };
1286
1287 /* I2C devicelist hash table for devices with generic USB IDs */
1288 static struct em28xx_hash_table em28xx_i2c_hash[] = {
1289         {0xb06a32c3, EM2800_BOARD_TERRATEC_CINERGY_200, TUNER_LG_PAL_NEW_TAPC},
1290         {0xf51200e3, EM2800_BOARD_VGEAR_POCKETTV, TUNER_LG_PAL_NEW_TAPC},
1291         {0x1ba50080, EM2860_BOARD_POINTNIX_INTRAORAL_CAMERA, TUNER_ABSENT},
1292 };
1293
1294 int em28xx_tuner_callback(void *ptr, int command, int arg)
1295 {
1296         int rc = 0;
1297         struct em28xx *dev = ptr;
1298
1299         if (dev->tuner_type != TUNER_XC2028)
1300                 return 0;
1301
1302         if (command != XC2028_TUNER_RESET)
1303                 return 0;
1304
1305         if (dev->mode == EM28XX_ANALOG_MODE)
1306                 rc = em28xx_gpio_set(dev, dev->tun_analog_gpio);
1307         else
1308                 rc = em28xx_gpio_set(dev, dev->tun_digital_gpio);
1309
1310         return rc;
1311 }
1312 EXPORT_SYMBOL_GPL(em28xx_tuner_callback);
1313
1314 static void em28xx_set_model(struct em28xx *dev)
1315 {
1316         dev->is_em2800 = em28xx_boards[dev->model].is_em2800;
1317         dev->has_msp34xx = em28xx_boards[dev->model].has_msp34xx;
1318         dev->tda9887_conf = em28xx_boards[dev->model].tda9887_conf;
1319         dev->decoder = em28xx_boards[dev->model].decoder;
1320         dev->video_inputs = em28xx_boards[dev->model].vchannels;
1321         dev->has_12mhz_i2s = em28xx_boards[dev->model].has_12mhz_i2s;
1322         dev->max_range_640_480 = em28xx_boards[dev->model].max_range_640_480;
1323         dev->has_dvb = em28xx_boards[dev->model].has_dvb;
1324         dev->has_snapshot_button = em28xx_boards[dev->model].has_snapshot_button;
1325         dev->valid = em28xx_boards[dev->model].valid;
1326 }
1327
1328 /* Since em28xx_pre_card_setup() requires a proper dev->model,
1329  * this won't work for boards with generic PCI IDs
1330  */
1331 void em28xx_pre_card_setup(struct em28xx *dev)
1332 {
1333         int rc;
1334
1335         rc = em28xx_read_reg(dev, EM2880_R04_GPO);
1336         if (rc >= 0)
1337                 dev->reg_gpo = rc;
1338
1339         dev->wait_after_write = 5;
1340         rc = em28xx_read_reg(dev, EM28XX_R0A_CHIPID);
1341         if (rc > 0) {
1342                 switch (rc) {
1343                 case CHIP_ID_EM2860:
1344                         em28xx_info("chip ID is em2860\n");
1345                         break;
1346                 case CHIP_ID_EM2883:
1347                         em28xx_info("chip ID is em2882/em2883\n");
1348                         dev->wait_after_write = 0;
1349                         break;
1350                 default:
1351                         em28xx_info("em28xx chip ID = %d\n", rc);
1352                 }
1353         }
1354         em28xx_set_model(dev);
1355
1356         /* request some modules */
1357         switch (dev->model) {
1358         case EM2880_BOARD_TERRATEC_PRODIGY_XS:
1359         case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
1360         case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2:
1361         case EM2860_BOARD_TERRATEC_HYBRID_XS:
1362         case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950:
1363         case EM2880_BOARD_PINNACLE_PCTV_HD_PRO:
1364         case EM2882_BOARD_PINNACLE_HYBRID_PRO:
1365         case EM2883_BOARD_KWORLD_HYBRID_A316:
1366         case EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600:
1367                 em28xx_write_regs(dev, EM28XX_R0F_XCLK,    "\x27", 1);
1368                 em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
1369                 msleep(50);
1370
1371                 /* Sets GPO/GPIO sequences for this device */
1372                 dev->analog_gpio      = hauppauge_wintv_hvr_900_analog;
1373                 dev->digital_gpio     = hauppauge_wintv_hvr_900_digital;
1374                 dev->tun_analog_gpio  = default_callback;
1375                 dev->tun_digital_gpio = default_callback;
1376                 break;
1377
1378         case EM2882_BOARD_TERRATEC_HYBRID_XS:
1379                 em28xx_write_regs(dev, EM28XX_R0F_XCLK,    "\x27", 1);
1380                 em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
1381                 msleep(50);
1382
1383                 /* should be added ir_codes here */
1384
1385                 /* Sets GPO/GPIO sequences for this device */
1386                 dev->analog_gpio      = hauppauge_wintv_hvr_900_analog;
1387                 dev->digital_gpio     = hauppauge_wintv_hvr_900_digital;
1388                 dev->tun_analog_gpio  = default_callback;
1389                 dev->tun_digital_gpio = em2882_terratec_hybrid_xs_digital;
1390                 break;
1391
1392         case EM2880_BOARD_TERRATEC_HYBRID_XS_FR:
1393         case EM2880_BOARD_TERRATEC_HYBRID_XS:
1394         case EM2870_BOARD_TERRATEC_XS:
1395         case EM2881_BOARD_PINNACLE_HYBRID_PRO:
1396         case EM2880_BOARD_KWORLD_DVB_310U:
1397         case EM2870_BOARD_KWORLD_350U:
1398         case EM2881_BOARD_DNT_DA2_HYBRID:
1399                 em28xx_write_regs(dev, EM28XX_R0F_XCLK,    "\x27", 1);
1400                 em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
1401                 msleep(50);
1402
1403                 /* NOTE: EM2881_DNT_DA2_HYBRID spend 140 msleep for digital
1404                          and analog commands. If this commands doesn't work,
1405                          add this timer. */
1406
1407                 /* Sets GPO/GPIO sequences for this device */
1408                 dev->analog_gpio      = default_analog;
1409                 dev->digital_gpio     = default_digital;
1410                 dev->tun_analog_gpio  = default_callback;
1411                 dev->tun_digital_gpio = default_callback;
1412                 break;
1413
1414         case EM2880_BOARD_MSI_DIGIVOX_AD:
1415         case EM2880_BOARD_MSI_DIGIVOX_AD_II:
1416                 em28xx_write_regs(dev, EM28XX_R0F_XCLK,    "\x27", 1);
1417                 em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
1418                 msleep(50);
1419
1420                 /* Sets GPO/GPIO sequences for this device */
1421                 dev->analog_gpio      = em2880_msi_digivox_ad_analog;
1422                 dev->digital_gpio     = em2880_msi_digivox_ad_digital;
1423                 dev->tun_analog_gpio  = default_callback;
1424                 dev->tun_digital_gpio = default_callback;
1425                 break;
1426
1427         case EM2750_BOARD_UNKNOWN:
1428         case EM2750_BOARD_DLCW_130:
1429                 em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x0a", 1);
1430                 break;
1431
1432         case EM2861_BOARD_PLEXTOR_PX_TV100U:
1433                 em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x27", 1);
1434                 em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
1435                 /* FIXME guess */
1436                 /* Turn on analog audio output */
1437                 em28xx_write_regs_req(dev, 0x00, 0x08, "\xfd", 1);
1438                 break;
1439
1440         case EM2861_BOARD_KWORLD_PVRTV_300U:
1441         case EM2880_BOARD_KWORLD_DVB_305U:
1442                 em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x27", 1);
1443                 em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x4c", 1);
1444                 msleep(10);
1445                 em28xx_write_regs(dev, 0x08, "\x6d", 1);
1446                 msleep(10);
1447                 em28xx_write_regs(dev, 0x08, "\x7d", 1);
1448                 msleep(10);
1449                 break;
1450
1451         case EM2870_BOARD_KWORLD_355U:
1452                 em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x27", 1);
1453                 em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
1454                 msleep(50);
1455
1456                 /* Sets GPO/GPIO sequences for this device */
1457                 dev->digital_gpio     = em2870_kworld_355u_digital;
1458                 break;
1459
1460         case EM2870_BOARD_COMPRO_VIDEOMATE:
1461                 em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x27", 1);
1462                 em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
1463                 /* TODO: someone can do some cleanup here...
1464                          not everything's needed */
1465                 em28xx_write_regs(dev, 0x04, "\x00", 1);
1466                 msleep(10);
1467                 em28xx_write_regs(dev, 0x04, "\x01", 1);
1468                 msleep(10);
1469                 em28xx_write_regs(dev, 0x08, "\xfd", 1);
1470                 mdelay(70);
1471                 em28xx_write_regs(dev, 0x08, "\xfc", 1);
1472                 mdelay(70);
1473                 em28xx_write_regs(dev, 0x08, "\xdc", 1);
1474                 mdelay(70);
1475                 em28xx_write_regs(dev, 0x08, "\xfc", 1);
1476                 mdelay(70);
1477                 break;
1478
1479         case EM2870_BOARD_TERRATEC_XS_MT2060:
1480                 em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x27", 1);
1481                 em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
1482                 /* this device needs some gpio writes to get the DVB-T
1483                    demod work */
1484                 em28xx_write_regs(dev, 0x08, "\xfe", 1);
1485                 mdelay(70);
1486                 em28xx_write_regs(dev, 0x08, "\xde", 1);
1487                 mdelay(70);
1488                 dev->em28xx_write_regs(dev, 0x08, "\xfe", 1);
1489                 mdelay(70);
1490                 break;
1491
1492         case EM2870_BOARD_PINNACLE_PCTV_DVB:
1493                 em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
1494                 /* this device needs some gpio writes to get the
1495                    DVB-T demod work */
1496                 em28xx_write_regs(dev, 0x08, "\xfe", 1);
1497                 mdelay(70);
1498                 em28xx_write_regs(dev, 0x08, "\xde", 1);
1499                 mdelay(70);
1500                 em28xx_write_regs(dev, 0x08, "\xfe", 1);
1501                 mdelay(70);
1502                 /* switch em2880 rc protocol */
1503                 em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x22", 1);
1504                 /* should be added ir_codes here */
1505                 break;
1506
1507         case EM2820_BOARD_GADMEI_UTV310:
1508                 em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x27", 1);
1509                 em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
1510                 /* Turn on analog audio output */
1511                 em28xx_write_regs_req(dev, 0x00, 0x08, "\xfd", 1);
1512                 break;
1513
1514         case EM2860_BOARD_GADMEI_UTV330:
1515                 /* Turn on IR */
1516                 em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x07", 1);
1517                 em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
1518                 /* should be added ir_codes here */
1519                 break;
1520
1521         case EM2820_BOARD_MSI_VOX_USB_2:
1522                 em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x27", 1);
1523                 em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
1524                 /* enables audio for that device */
1525                 em28xx_write_regs_req(dev, 0x00, 0x08, "\xfd", 1);
1526                 break;
1527         }
1528
1529         em28xx_gpio_set(dev, dev->tun_analog_gpio);
1530         em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
1531
1532         /* Unlock device */
1533         em28xx_set_mode(dev, EM28XX_MODE_UNDEFINED);
1534 }
1535
1536 static void em28xx_setup_xc3028(struct em28xx *dev, struct xc2028_ctrl *ctl)
1537 {
1538         memset(ctl, 0, sizeof(*ctl));
1539
1540         ctl->fname   = XC2028_DEFAULT_FIRMWARE;
1541         ctl->max_len = 64;
1542         ctl->mts = em28xx_boards[dev->model].mts_firmware;
1543
1544         switch (dev->model) {
1545         case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
1546                 ctl->demod = XC3028_FE_ZARLINK456;
1547                 break;
1548         case EM2880_BOARD_TERRATEC_HYBRID_XS:
1549                 ctl->demod = XC3028_FE_ZARLINK456;
1550                 break;
1551         case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2:
1552                 /* djh - Not sure which demod we need here */
1553                 ctl->demod = XC3028_FE_DEFAULT;
1554                 break;
1555         case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950:
1556         case EM2880_BOARD_PINNACLE_PCTV_HD_PRO:
1557         case EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600:
1558                 /* FIXME: Better to specify the needed IF */
1559                 ctl->demod = XC3028_FE_DEFAULT;
1560                 break;
1561         default:
1562                 ctl->demod = XC3028_FE_OREN538;
1563         }
1564 }
1565
1566 static void em28xx_config_tuner(struct em28xx *dev)
1567 {
1568         struct v4l2_priv_tun_config  xc2028_cfg;
1569         struct tuner_setup           tun_setup;
1570         struct v4l2_frequency        f;
1571
1572         if (dev->tuner_type == TUNER_ABSENT)
1573                 return;
1574
1575         tun_setup.mode_mask = T_ANALOG_TV | T_RADIO;
1576         tun_setup.type = dev->tuner_type;
1577         tun_setup.addr = dev->tuner_addr;
1578         tun_setup.tuner_callback = em28xx_tuner_callback;
1579
1580         em28xx_i2c_call_clients(dev, TUNER_SET_TYPE_ADDR, &tun_setup);
1581
1582         if (dev->tuner_type == TUNER_XC2028) {
1583                 struct xc2028_ctrl           ctl;
1584
1585                 em28xx_setup_xc3028(dev, &ctl);
1586
1587                 xc2028_cfg.tuner = TUNER_XC2028;
1588                 xc2028_cfg.priv  = &ctl;
1589
1590                 em28xx_i2c_call_clients(dev, TUNER_SET_CONFIG, &xc2028_cfg);
1591         }
1592
1593         /* configure tuner */
1594         f.tuner = 0;
1595         f.type = V4L2_TUNER_ANALOG_TV;
1596         f.frequency = 9076;     /* just a magic number */
1597         dev->ctl_freq = f.frequency;
1598         em28xx_i2c_call_clients(dev, VIDIOC_S_FREQUENCY, &f);
1599 }
1600
1601 static int em28xx_hint_board(struct em28xx *dev)
1602 {
1603         int i;
1604
1605         /* HINT method: EEPROM
1606          *
1607          * This method works only for boards with eeprom.
1608          * Uses a hash of all eeprom bytes. The hash should be
1609          * unique for a vendor/tuner pair.
1610          * There are a high chance that tuners for different
1611          * video standards produce different hashes.
1612          */
1613         for (i = 0; i < ARRAY_SIZE(em28xx_eeprom_hash); i++) {
1614                 if (dev->hash == em28xx_eeprom_hash[i].hash) {
1615                         dev->model = em28xx_eeprom_hash[i].model;
1616                         dev->tuner_type = em28xx_eeprom_hash[i].tuner;
1617
1618                         em28xx_errdev("Your board has no unique USB ID.\n");
1619                         em28xx_errdev("A hint were successfully done, "
1620                                       "based on eeprom hash.\n");
1621                         em28xx_errdev("This method is not 100%% failproof.\n");
1622                         em28xx_errdev("If the board were missdetected, "
1623                                       "please email this log to:\n");
1624                         em28xx_errdev("\tV4L Mailing List "
1625                                       " <video4linux-list@redhat.com>\n");
1626                         em28xx_errdev("Board detected as %s\n",
1627                                       em28xx_boards[dev->model].name);
1628
1629                         return 0;
1630                 }
1631         }
1632
1633         /* HINT method: I2C attached devices
1634          *
1635          * This method works for all boards.
1636          * Uses a hash of i2c scanned devices.
1637          * Devices with the same i2c attached chips will
1638          * be considered equal.
1639          * This method is less precise than the eeprom one.
1640          */
1641
1642         /* user did not request i2c scanning => do it now */
1643         if (!dev->i2c_hash)
1644                 em28xx_do_i2c_scan(dev);
1645
1646         for (i = 0; i < ARRAY_SIZE(em28xx_i2c_hash); i++) {
1647                 if (dev->i2c_hash == em28xx_i2c_hash[i].hash) {
1648                         dev->model = em28xx_i2c_hash[i].model;
1649                         dev->tuner_type = em28xx_i2c_hash[i].tuner;
1650                         em28xx_errdev("Your board has no unique USB ID.\n");
1651                         em28xx_errdev("A hint were successfully done, "
1652                                       "based on i2c devicelist hash.\n");
1653                         em28xx_errdev("This method is not 100%% failproof.\n");
1654                         em28xx_errdev("If the board were missdetected, "
1655                                       "please email this log to:\n");
1656                         em28xx_errdev("\tV4L Mailing List "
1657                                       " <video4linux-list@redhat.com>\n");
1658                         em28xx_errdev("Board detected as %s\n",
1659                                       em28xx_boards[dev->model].name);
1660
1661                         return 0;
1662                 }
1663         }
1664
1665         em28xx_errdev("Your board has no unique USB ID and thus need a "
1666                       "hint to be detected.\n");
1667         em28xx_errdev("You may try to use card=<n> insmod option to "
1668                       "workaround that.\n");
1669         em28xx_errdev("Please send an email with this log to:\n");
1670         em28xx_errdev("\tV4L Mailing List <video4linux-list@redhat.com>\n");
1671         em28xx_errdev("Board eeprom hash is 0x%08lx\n", dev->hash);
1672         em28xx_errdev("Board i2c devicelist hash is 0x%08lx\n", dev->i2c_hash);
1673
1674         em28xx_errdev("Here is a list of valid choices for the card=<n>"
1675                       " insmod option:\n");
1676         for (i = 0; i < em28xx_bcount; i++) {
1677                 em28xx_errdev("    card=%d -> %s\n",
1678                                 i, em28xx_boards[i].name);
1679         }
1680         return -1;
1681 }
1682
1683 /* ----------------------------------------------------------------------- */
1684 void em28xx_set_ir(struct em28xx *dev, struct IR_i2c *ir)
1685 {
1686         if (disable_ir) {
1687                 ir->get_key = NULL;
1688                 return ;
1689         }
1690
1691         /* detect & configure */
1692         switch (dev->model) {
1693         case (EM2800_BOARD_UNKNOWN):
1694                 break;
1695         case (EM2820_BOARD_UNKNOWN):
1696                 break;
1697         case (EM2800_BOARD_TERRATEC_CINERGY_200):
1698         case (EM2820_BOARD_TERRATEC_CINERGY_250):
1699                 ir->ir_codes = ir_codes_em_terratec;
1700                 ir->get_key = em28xx_get_key_terratec;
1701                 snprintf(ir->c.name, sizeof(ir->c.name),
1702                          "i2c IR (EM28XX Terratec)");
1703                 break;
1704         case (EM2820_BOARD_PINNACLE_USB_2):
1705                 ir->ir_codes = ir_codes_pinnacle_grey;
1706                 ir->get_key = em28xx_get_key_pinnacle_usb_grey;
1707                 snprintf(ir->c.name, sizeof(ir->c.name),
1708                          "i2c IR (EM28XX Pinnacle PCTV)");
1709                 break;
1710         case (EM2820_BOARD_HAUPPAUGE_WINTV_USB_2):
1711                 ir->ir_codes = ir_codes_hauppauge_new;
1712                 ir->get_key = em28xx_get_key_em_haup;
1713                 snprintf(ir->c.name, sizeof(ir->c.name),
1714                          "i2c IR (EM2840 Hauppauge)");
1715                 break;
1716         case (EM2820_BOARD_MSI_VOX_USB_2):
1717                 break;
1718         case (EM2800_BOARD_LEADTEK_WINFAST_USBII):
1719                 break;
1720         case (EM2800_BOARD_KWORLD_USB2800):
1721                 break;
1722         case (EM2800_BOARD_GRABBEEX_USB2800):
1723                 break;
1724         }
1725 }
1726
1727 void em28xx_card_setup(struct em28xx *dev)
1728 {
1729         em28xx_set_model(dev);
1730
1731         dev->tuner_type = em28xx_boards[dev->model].tuner_type;
1732
1733         /* request some modules */
1734         switch (dev->model) {
1735         case EM2820_BOARD_HAUPPAUGE_WINTV_USB_2:
1736         case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
1737         case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2:
1738         case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950:
1739         {
1740                 struct tveeprom tv;
1741 #ifdef CONFIG_MODULES
1742                 request_module("tveeprom");
1743 #endif
1744                 /* Call first TVeeprom */
1745
1746                 dev->i2c_client.addr = 0xa0 >> 1;
1747                 tveeprom_hauppauge_analog(&dev->i2c_client, &tv, dev->eedata);
1748
1749                 dev->tuner_type = tv.tuner_type;
1750
1751                 if (tv.audio_processor == V4L2_IDENT_MSPX4XX) {
1752                         dev->i2s_speed = 2048000;
1753                         dev->has_msp34xx = 1;
1754                 }
1755 #ifdef CONFIG_MODULES
1756                 if (tv.has_ir)
1757                         request_module("ir-kbd-i2c");
1758 #endif
1759                 break;
1760         }
1761         case EM2820_BOARD_KWORLD_PVRTV2800RF:
1762                 /* GPIO enables sound on KWORLD PVR TV 2800RF */
1763                 em28xx_write_regs_req(dev, 0x00, 0x08, "\xf9", 1);
1764                 break;
1765         case EM2820_BOARD_UNKNOWN:
1766         case EM2800_BOARD_UNKNOWN:
1767                 if (!em28xx_hint_board(dev))
1768                         em28xx_set_model(dev);
1769                 break;
1770         }
1771
1772         if (dev->has_snapshot_button)
1773                 em28xx_register_snapshot_button(dev);
1774
1775         if (dev->valid == EM28XX_BOARD_NOT_VALIDATED) {
1776                 em28xx_errdev("\n\n");
1777                 em28xx_errdev("The support for this board weren't "
1778                               "valid yet.\n");
1779                 em28xx_errdev("Please send a report of having this working\n");
1780                 em28xx_errdev("not to V4L mailing list (and/or to other "
1781                                 "addresses)\n\n");
1782         }
1783
1784         /* Allow override tuner type by a module parameter */
1785         if (tuner >= 0)
1786                 dev->tuner_type = tuner;
1787
1788 #ifdef CONFIG_MODULES
1789         /* request some modules */
1790         if (dev->has_msp34xx)
1791                 request_module("msp3400");
1792         if (dev->decoder == EM28XX_SAA7113 || dev->decoder == EM28XX_SAA7114)
1793                 request_module("saa7115");
1794         if (dev->decoder == EM28XX_TVP5150)
1795                 request_module("tvp5150");
1796         if (dev->tuner_type != TUNER_ABSENT)
1797                 request_module("tuner");
1798 #endif
1799
1800         em28xx_config_tuner(dev);
1801 }