drivers/media/video/bt8xx/bttv-cards.c

   1 /*
   2
   3     bttv-cards.c
   4
   5     this file has configuration informations - card-specific stuff
   6     like the big tvcards array for the most part
   7
   8     Copyright (C) 1996,97,98 Ralph  Metzler (rjkm@thp.uni-koeln.de)
   9                            & Marcus Metzler (mocm@thp.uni-koeln.de)
  10     (c) 1999-2001 Gerd Knorr <kraxel@goldbach.in-berlin.de>
  11
  12     This program is free software; you can redistribute it and/or modify
  13     it under the terms of the GNU General Public License as published by
  14     the Free Software Foundation; either version 2 of the License, or
  15     (at your option) any later version.
  16
  17     This program is distributed in the hope that it will be useful,
  18     but WITHOUT ANY WARRANTY; without even the implied warranty of
  19     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  20     GNU General Public License for more details.
  21
  22     You should have received a copy of the GNU General Public License
  23     along with this program; if not, write to the Free Software
  24     Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  25
  26 */
  27
  28 #include <linux/delay.h>
  29 #include <linux/module.h>
  30 #include <linux/kmod.h>
  31 #include <linux/init.h>
  32 #include <linux/pci.h>
  33 #include <linux/vmalloc.h>
  34 #include <linux/firmware.h>
  35 #include <net/checksum.h>
  36
  37 #include <asm/unaligned.h>
  38 #include <asm/io.h>
  39
  40 #include "bttvp.h"
  41 #include <media/v4l2-common.h>
  42 #include <media/tvaudio.h>
  43 #include "bttv-audio-hook.h"
  44
  45 /* fwd decl */
  46 static void boot_msp34xx(struct bttv *btv, int pin);
  47 static void boot_bt832(struct bttv *btv);
  48 static void hauppauge_eeprom(struct bttv *btv);
  49 static void avermedia_eeprom(struct bttv *btv);
  50 static void osprey_eeprom(struct bttv *btv, const u8 ee[256]);
  51 static void modtec_eeprom(struct bttv *btv);
  52 static void init_PXC200(struct bttv *btv);
  53 static void init_RTV24(struct bttv *btv);
  54
  55 static void rv605_muxsel(struct bttv *btv, unsigned int input);
  56 static void eagle_muxsel(struct bttv *btv, unsigned int input);
  57 static void xguard_muxsel(struct bttv *btv, unsigned int input);
  58 static void ivc120_muxsel(struct bttv *btv, unsigned int input);
  59 static void gvc1100_muxsel(struct bttv *btv, unsigned int input);
  60
  61 static void PXC200_muxsel(struct bttv *btv, unsigned int input);
  62
  63 static void picolo_tetra_muxsel(struct bttv *btv, unsigned int input);
  64 static void picolo_tetra_init(struct bttv *btv);
  65
  66 static void tibetCS16_muxsel(struct bttv *btv, unsigned int input);
  67 static void tibetCS16_init(struct bttv *btv);
  68
  69 static void kodicom4400r_muxsel(struct bttv *btv, unsigned int input);
  70 static void kodicom4400r_init(struct bttv *btv);
  71
  72 static void sigmaSLC_muxsel(struct bttv *btv, unsigned int input);
  73 static void sigmaSQ_muxsel(struct bttv *btv, unsigned int input);
  74
  75 static void geovision_muxsel(struct bttv *btv, unsigned int input);
  76
  77 static int terratec_active_radio_upgrade(struct bttv *btv);
  78 static int tea5757_read(struct bttv *btv);
  79 static int tea5757_write(struct bttv *btv, int value);
  80 static void identify_by_eeprom(struct bttv *btv,
  81                                unsigned char eeprom_data[256]);
  82 static int __devinit pvr_boot(struct bttv *btv);
  83
  84 /* config variables */
  85 static unsigned int triton1;
  86 static unsigned int vsfx;
  87 static unsigned int latency = UNSET;
  88 int no_overlay=-1;
  89
  90 static unsigned int card[BTTV_MAX]   = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
  91 static unsigned int pll[BTTV_MAX]    = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
  92 static unsigned int tuner[BTTV_MAX]  = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
  93 static unsigned int svhs[BTTV_MAX]   = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
  94 static unsigned int remote[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
  95 static struct bttv  *master[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = NULL };
  96 #ifdef MODULE
  97 static unsigned int autoload = 1;
  98 #else
  99 static unsigned int autoload;
 100 #endif
 101 static unsigned int gpiomask = UNSET;
 102 static unsigned int audioall = UNSET;
 103 static unsigned int audiomux[5] = { [ 0 ... 4 ] = UNSET };
 104
 105 /* insmod options */
 106 module_param(triton1,    int, 0444);
 107 module_param(vsfx,       int, 0444);
 108 module_param(no_overlay, int, 0444);
 109 module_param(latency,    int, 0444);
 110 module_param(gpiomask,   int, 0444);
 111 module_param(audioall,   int, 0444);
 112 module_param(autoload,   int, 0444);
 113
 114 module_param_array(card,     int, NULL, 0444);
 115 module_param_array(pll,      int, NULL, 0444);
 116 module_param_array(tuner,    int, NULL, 0444);
 117 module_param_array(svhs,     int, NULL, 0444);
 118 module_param_array(remote,   int, NULL, 0444);
 119 module_param_array(audiomux, int, NULL, 0444);
 120
 121 MODULE_PARM_DESC(triton1,"set ETBF pci config bit "
 122                  "[enable bug compatibility for triton1 + others]");
 123 MODULE_PARM_DESC(vsfx,"set VSFX pci config bit "
 124                  "[yet another chipset flaw workaround]");
 125 MODULE_PARM_DESC(latency,"pci latency timer");
 126 MODULE_PARM_DESC(card,"specify TV/grabber card model, see CARDLIST file for a list");
 127 MODULE_PARM_DESC(pll,"specify installed crystal (0=none, 28=28 MHz, 35=35 MHz)");
 128 MODULE_PARM_DESC(tuner,"specify installed tuner type");
 129 MODULE_PARM_DESC(autoload,"automatically load i2c modules like tuner.o, default is 1 (yes)");
 130 MODULE_PARM_DESC(no_overlay,"allow override overlay default (0 disables, 1 enables)"
 131                 " [some VIA/SIS chipsets are known to have problem with overlay]");
 132
 133 /* ----------------------------------------------------------------------- */
 134 /* list of card IDs for bt878+ cards                                       */
 135
 136 static struct CARD {
 137         unsigned id;
 138         int cardnr;
 139         char *name;
 140 } cards[] __devinitdata = {
 141         { 0x13eb0070, BTTV_BOARD_HAUPPAUGE878,  "Hauppauge WinTV" },
 142         { 0x39000070, BTTV_BOARD_HAUPPAUGE878,  "Hauppauge WinTV-D" },
 143         { 0x45000070, BTTV_BOARD_HAUPPAUGEPVR,  "Hauppauge WinTV/PVR" },
 144         { 0xff000070, BTTV_BOARD_OSPREY1x0,     "Osprey-100" },
 145         { 0xff010070, BTTV_BOARD_OSPREY2x0_SVID,"Osprey-200" },
 146         { 0xff020070, BTTV_BOARD_OSPREY500,     "Osprey-500" },
 147         { 0xff030070, BTTV_BOARD_OSPREY2000,    "Osprey-2000" },
 148         { 0xff040070, BTTV_BOARD_OSPREY540,     "Osprey-540" },
 149         { 0xff070070, BTTV_BOARD_OSPREY440,     "Osprey-440" },
 150
 151         { 0x00011002, BTTV_BOARD_ATI_TVWONDER,  "ATI TV Wonder" },
 152         { 0x00031002, BTTV_BOARD_ATI_TVWONDERVE,"ATI TV Wonder/VE" },
 153
 154         { 0x6606107d, BTTV_BOARD_WINFAST2000,   "Leadtek WinFast TV 2000" },
 155         { 0x6607107d, BTTV_BOARD_WINFASTVC100,  "Leadtek WinFast VC 100" },
 156         { 0x6609107d, BTTV_BOARD_WINFAST2000,   "Leadtek TV 2000 XP" },
 157         { 0x263610b4, BTTV_BOARD_STB2,          "STB TV PCI FM, Gateway P/N 6000704" },
 158         { 0x264510b4, BTTV_BOARD_STB2,          "STB TV PCI FM, Gateway P/N 6000704" },
 159         { 0x402010fc, BTTV_BOARD_GVBCTV3PCI,    "I-O Data Co. GV-BCTV3/PCI" },
 160         { 0x405010fc, BTTV_BOARD_GVBCTV4PCI,    "I-O Data Co. GV-BCTV4/PCI" },
 161         { 0x407010fc, BTTV_BOARD_GVBCTV5PCI,    "I-O Data Co. GV-BCTV5/PCI" },
 162         { 0xd01810fc, BTTV_BOARD_GVBCTV5PCI,    "I-O Data Co. GV-BCTV5/PCI" },
 163
 164         { 0x001211bd, BTTV_BOARD_PINNACLE,      "Pinnacle PCTV" },
 165         /* some cards ship with byteswapped IDs ... */
 166         { 0x1200bd11, BTTV_BOARD_PINNACLE,      "Pinnacle PCTV [bswap]" },
 167         { 0xff00bd11, BTTV_BOARD_PINNACLE,      "Pinnacle PCTV [bswap]" },
 168         /* this seems to happen as well ... */
 169         { 0xff1211bd, BTTV_BOARD_PINNACLE,      "Pinnacle PCTV" },
 170
 171         { 0x3000121a, BTTV_BOARD_VOODOOTV_200,  "3Dfx VoodooTV 200" },
 172         { 0x263710b4, BTTV_BOARD_VOODOOTV_FM,   "3Dfx VoodooTV FM" },
 173         { 0x3060121a, BTTV_BOARD_STB2,    "3Dfx VoodooTV 100/ STB OEM" },
 174
 175         { 0x3000144f, BTTV_BOARD_MAGICTVIEW063, "(Askey Magic/others) TView99 CPH06x" },
 176         { 0xa005144f, BTTV_BOARD_MAGICTVIEW063, "CPH06X TView99-Card" },
 177         { 0x3002144f, BTTV_BOARD_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH05x" },
 178         { 0x3005144f, BTTV_BOARD_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH061/06L (T1/LC)" },
 179         { 0x5000144f, BTTV_BOARD_MAGICTVIEW061, "Askey CPH050" },
 180         { 0x300014ff, BTTV_BOARD_MAGICTVIEW061, "TView 99 (CPH061)" },
 181         { 0x300214ff, BTTV_BOARD_PHOEBE_TVMAS,  "Phoebe TV Master (CPH060)" },
 182
 183         { 0x00011461, BTTV_BOARD_AVPHONE98,     "AVerMedia TVPhone98" },
 184         { 0x00021461, BTTV_BOARD_AVERMEDIA98,   "AVermedia TVCapture 98" },
 185         { 0x00031461, BTTV_BOARD_AVPHONE98,     "AVerMedia TVPhone98" },
 186         { 0x00041461, BTTV_BOARD_AVERMEDIA98,   "AVerMedia TVCapture 98" },
 187         { 0x03001461, BTTV_BOARD_AVERMEDIA98,   "VDOMATE TV TUNER CARD" },
 188
 189         { 0x1117153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue (Philips PAL B/G)" },
 190         { 0x1118153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue (Temic PAL B/G)" },
 191         { 0x1119153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue (Philips PAL I)" },
 192         { 0x111a153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue (Temic PAL I)" },
 193
 194         { 0x1123153b, BTTV_BOARD_TERRATVRADIO,  "Terratec TV Radio+" },
 195         { 0x1127153b, BTTV_BOARD_TERRATV,       "Terratec TV+ (V1.05)"    },
 196         /* clashes with FlyVideo
 197          *{ 0x18521852, BTTV_BOARD_TERRATV,     "Terratec TV+ (V1.10)"    }, */
 198         { 0x1134153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue (LR102)" },
 199         { 0x1135153b, BTTV_BOARD_TERRATVALUER,  "Terratec TValue Radio" }, /* LR102 */
 200         { 0x5018153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue" },       /* ?? */
 201         { 0xff3b153b, BTTV_BOARD_TERRATVALUER,  "Terratec TValue Radio" }, /* ?? */
 202
 203         { 0x400015b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV" },
 204         { 0x400a15b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV" },
 205         { 0x400d15b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
 206         { 0x401015b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
 207         { 0x401615b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
 208
 209         { 0x1430aa00, BTTV_BOARD_PV143,         "Provideo PV143A" },
 210         { 0x1431aa00, BTTV_BOARD_PV143,         "Provideo PV143B" },
 211         { 0x1432aa00, BTTV_BOARD_PV143,         "Provideo PV143C" },
 212         { 0x1433aa00, BTTV_BOARD_PV143,         "Provideo PV143D" },
 213         { 0x1433aa03, BTTV_BOARD_PV143,         "Security Eyes" },
 214
 215         { 0x1460aa00, BTTV_BOARD_PV150,         "Provideo PV150A-1" },
 216         { 0x1461aa01, BTTV_BOARD_PV150,         "Provideo PV150A-2" },
 217         { 0x1462aa02, BTTV_BOARD_PV150,         "Provideo PV150A-3" },
 218         { 0x1463aa03, BTTV_BOARD_PV150,         "Provideo PV150A-4" },
 219
 220         { 0x1464aa04, BTTV_BOARD_PV150,         "Provideo PV150B-1" },
 221         { 0x1465aa05, BTTV_BOARD_PV150,         "Provideo PV150B-2" },
 222         { 0x1466aa06, BTTV_BOARD_PV150,         "Provideo PV150B-3" },
 223         { 0x1467aa07, BTTV_BOARD_PV150,         "Provideo PV150B-4" },
 224
 225         { 0xa132ff00, BTTV_BOARD_IVC100,        "IVC-100"  },
 226         { 0xa1550000, BTTV_BOARD_IVC200,        "IVC-200"  },
 227         { 0xa1550001, BTTV_BOARD_IVC200,        "IVC-200"  },
 228         { 0xa1550002, BTTV_BOARD_IVC200,        "IVC-200"  },
 229         { 0xa1550003, BTTV_BOARD_IVC200,        "IVC-200"  },
 230         { 0xa1550100, BTTV_BOARD_IVC200,        "IVC-200G" },
 231         { 0xa1550101, BTTV_BOARD_IVC200,        "IVC-200G" },
 232         { 0xa1550102, BTTV_BOARD_IVC200,        "IVC-200G" },
 233         { 0xa1550103, BTTV_BOARD_IVC200,        "IVC-200G" },
 234         { 0xa182ff00, BTTV_BOARD_IVC120,        "IVC-120G" },
 235         { 0xa182ff01, BTTV_BOARD_IVC120,        "IVC-120G" },
 236         { 0xa182ff02, BTTV_BOARD_IVC120,        "IVC-120G" },
 237         { 0xa182ff03, BTTV_BOARD_IVC120,        "IVC-120G" },
 238         { 0xa182ff04, BTTV_BOARD_IVC120,        "IVC-120G" },
 239         { 0xa182ff05, BTTV_BOARD_IVC120,        "IVC-120G" },
 240         { 0xa182ff06, BTTV_BOARD_IVC120,        "IVC-120G" },
 241         { 0xa182ff07, BTTV_BOARD_IVC120,        "IVC-120G" },
 242         { 0xa182ff08, BTTV_BOARD_IVC120,        "IVC-120G" },
 243         { 0xa182ff09, BTTV_BOARD_IVC120,        "IVC-120G" },
 244         { 0xa182ff0a, BTTV_BOARD_IVC120,        "IVC-120G" },
 245         { 0xa182ff0b, BTTV_BOARD_IVC120,        "IVC-120G" },
 246         { 0xa182ff0c, BTTV_BOARD_IVC120,        "IVC-120G" },
 247         { 0xa182ff0d, BTTV_BOARD_IVC120,        "IVC-120G" },
 248         { 0xa182ff0e, BTTV_BOARD_IVC120,        "IVC-120G" },
 249         { 0xa182ff0f, BTTV_BOARD_IVC120,        "IVC-120G" },
 250
 251         { 0x41424344, BTTV_BOARD_GRANDTEC,      "GrandTec Multi Capture" },
 252         { 0x01020304, BTTV_BOARD_XGUARD,        "Grandtec Grand X-Guard" },
 253
 254         { 0x18501851, BTTV_BOARD_CHRONOS_VS2,   "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" },
 255         { 0xa0501851, BTTV_BOARD_CHRONOS_VS2,   "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" },
 256         { 0x18511851, BTTV_BOARD_FLYVIDEO98EZ,  "FlyVideo 98EZ (LR51)/ CyberMail AV" },
 257         { 0x18521852, BTTV_BOARD_TYPHOON_TVIEW, "FlyVideo 98FM (LR50)/ Typhoon TView TV/FM Tuner" },
 258         { 0x41a0a051, BTTV_BOARD_FLYVIDEO_98FM, "Lifeview FlyVideo 98 LR50 Rev Q" },
 259         { 0x18501f7f, BTTV_BOARD_FLYVIDEO_98,   "Lifeview Flyvideo 98" },
 260
 261         { 0x010115cb, BTTV_BOARD_GMV1,          "AG GMV1" },
 262         { 0x010114c7, BTTV_BOARD_MODTEC_205,    "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV" },
 263
 264         { 0x10b42636, BTTV_BOARD_HAUPPAUGE878,  "STB ???" },
 265         { 0x217d6606, BTTV_BOARD_WINFAST2000,   "Leadtek WinFast TV 2000" },
 266         { 0xfff6f6ff, BTTV_BOARD_WINFAST2000,   "Leadtek WinFast TV 2000" },
 267         { 0x03116000, BTTV_BOARD_SENSORAY311,   "Sensoray 311" },
 268         { 0x00790e11, BTTV_BOARD_WINDVR,        "Canopus WinDVR PCI" },
 269         { 0xa0fca1a0, BTTV_BOARD_ZOLTRIX,       "Face to Face Tvmax" },
 270         { 0x82b2aa6a, BTTV_BOARD_SIMUS_GVC1100, "SIMUS GVC1100" },
 271         { 0x146caa0c, BTTV_BOARD_PV951,         "ituner spectra8" },
 272         { 0x200a1295, BTTV_BOARD_PXC200,        "ImageNation PXC200A" },
 273
 274         { 0x40111554, BTTV_BOARD_PV_BT878P_9B,  "Prolink Pixelview PV-BT" },
 275         { 0x17de0a01, BTTV_BOARD_KWORLD,        "Mecer TV/FM/Video Tuner" },
 276
 277         { 0x01051805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #1" },
 278         { 0x01061805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #2" },
 279         { 0x01071805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #3" },
 280         { 0x01081805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #4" },
 281
 282         { 0x15409511, BTTV_BOARD_ACORP_Y878F, "Acorp Y878F" },
 283
 284         { 0x53534149, BTTV_BOARD_SSAI_SECURITY, "SSAI Security Video Interface" },
 285         { 0x5353414a, BTTV_BOARD_SSAI_ULTRASOUND, "SSAI Ultrasound Video Interface" },
 286
 287         /* likely broken, vendor id doesn't match the other magic views ...
 288          * { 0xa0fca04f, BTTV_BOARD_MAGICTVIEW063, "Guillemot Maxi TV Video 3" }, */
 289
 290         /* Duplicate PCI ID, reconfigure for this board during the eeprom read.
 291         * { 0x13eb0070, BTTV_BOARD_HAUPPAUGE_IMPACTVCB,  "Hauppauge ImpactVCB" }, */
 292
 293         /* DVB cards (using pci function .1 for mpeg data xfer) */
 294         { 0x001c11bd, BTTV_BOARD_PINNACLESAT,   "Pinnacle PCTV Sat" },
 295         { 0x01010071, BTTV_BOARD_NEBULA_DIGITV, "Nebula Electronics DigiTV" },
 296         { 0x20007063, BTTV_BOARD_PC_HDTV,       "pcHDTV HD-2000 TV"},
 297         { 0x002611bd, BTTV_BOARD_TWINHAN_DST,   "Pinnacle PCTV SAT CI" },
 298         { 0x00011822, BTTV_BOARD_TWINHAN_DST,   "Twinhan VisionPlus DVB" },
 299         { 0xfc00270f, BTTV_BOARD_TWINHAN_DST,   "ChainTech digitop DST-1000 DVB-S" },
 300         { 0x07711461, BTTV_BOARD_AVDVBT_771,    "AVermedia AverTV DVB-T 771" },
 301         { 0x07611461, BTTV_BOARD_AVDVBT_761,    "AverMedia AverTV DVB-T 761" },
 302         { 0xdb1018ac, BTTV_BOARD_DVICO_DVBT_LITE,    "DViCO FusionHDTV DVB-T Lite" },
 303         { 0xdb1118ac, BTTV_BOARD_DVICO_DVBT_LITE,    "Ultraview DVB-T Lite" },
 304         { 0xd50018ac, BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE,    "DViCO FusionHDTV 5 Lite" },
 305         { 0x00261822, BTTV_BOARD_TWINHAN_DST,   "DNTV Live! Mini "},
 306         { 0xd200dbc0, BTTV_BOARD_DVICO_FUSIONHDTV_2,    "DViCO FusionHDTV 2" },
 307         { 0x763c008a, BTTV_BOARD_GEOVISION_GV600,       "GeoVision GV-600" },
 308
 309         { 0, -1, NULL }
 310 };
 311
 312 /* ----------------------------------------------------------------------- */
 313 /* array with description for bt848 / bt878 tv/grabber cards               */
 314
 315 struct tvcard bttv_tvcards[] = {
 316         /* ---- card 0x00 ---------------------------------- */
 317         [BTTV_BOARD_UNKNOWN] = {
 318                 .name           = " *** UNKNOWN/GENERIC *** ",
 319                 .video_inputs   = 4,
 320                 .audio_inputs   = 1,
 321                 .tuner          = 0,
 322                 .svhs           = 2,
 323                 .muxsel         = { 2, 3, 1, 0 },
 324                 .tuner_type     = UNSET,
 325                 .tuner_addr     = ADDR_UNSET,
 326                 .radio_addr     = ADDR_UNSET,
 327         },
 328         [BTTV_BOARD_MIRO] = {
 329                 .name           = "MIRO PCTV",
 330                 .video_inputs   = 4,
 331                 .audio_inputs   = 1,
 332                 .tuner          = 0,
 333                 .svhs           = 2,
 334                 .gpiomask       = 15,
 335                 .muxsel         = { 2, 3, 1, 1 },
 336                 .gpiomux        = { 2, 0, 0, 0 },
 337                 .gpiomute       = 10,
 338                 .needs_tvaudio  = 1,
 339                 .tuner_type     = UNSET,
 340                 .tuner_addr     = ADDR_UNSET,
 341                 .radio_addr     = ADDR_UNSET,
 342         },
 343         [BTTV_BOARD_HAUPPAUGE] = {
 344                 .name           = "Hauppauge (bt848)",
 345                 .video_inputs   = 4,
 346                 .audio_inputs   = 1,
 347                 .tuner          = 0,
 348                 .svhs           = 2,
 349                 .gpiomask       = 7,
 350                 .muxsel         = { 2, 3, 1, 1 },
 351                 .gpiomux        = { 0, 1, 2, 3 },
 352                 .gpiomute       = 4,
 353                 .needs_tvaudio  = 1,
 354                 .tuner_type     = UNSET,
 355                 .tuner_addr     = ADDR_UNSET,
 356                 .radio_addr     = ADDR_UNSET,
 357         },
 358         [BTTV_BOARD_STB] = {
 359                 .name           = "STB, Gateway P/N 6000699 (bt848)",
 360                 .video_inputs   = 3,
 361                 .audio_inputs   = 1,
 362                 .tuner          = 0,
 363                 .svhs           = 2,
 364                 .gpiomask       = 7,
 365                 .muxsel         = { 2, 3, 1, 1 },
 366                 .gpiomux        = { 4, 0, 2, 3 },
 367                 .gpiomute       = 1,
 368                 .no_msp34xx     = 1,
 369                 .needs_tvaudio  = 1,
 370                 .tuner_type     = TUNER_PHILIPS_NTSC,
 371                 .tuner_addr     = ADDR_UNSET,
 372                 .radio_addr     = ADDR_UNSET,
 373                 .pll            = PLL_28,
 374                 .has_radio      = 1,
 375         },
 376
 377         /* ---- card 0x04 ---------------------------------- */
 378         [BTTV_BOARD_INTEL] = {
 379                 .name           = "Intel Create and Share PCI/ Smart Video Recorder III",
 380                 .video_inputs   = 4,
 381                 .audio_inputs   = 0,
 382                 .tuner          = UNSET,
 383                 .svhs           = 2,
 384                 .gpiomask       = 0,
 385                 .muxsel         = { 2, 3, 1, 1 },
 386                 .gpiomux        = { 0 },
 387                 .needs_tvaudio  = 0,
 388                 .tuner_type     = TUNER_ABSENT,
 389                 .tuner_addr     = ADDR_UNSET,
 390                 .radio_addr     = ADDR_UNSET,
 391         },
 392         [BTTV_BOARD_DIAMOND] = {
 393                 .name           = "Diamond DTV2000",
 394                 .video_inputs   = 4,
 395                 .audio_inputs   = 1,
 396                 .tuner          = 0,
 397                 .svhs           = 2,
 398                 .gpiomask       = 3,
 399                 .muxsel         = { 2, 3, 1, 0 },
 400                 .gpiomux        = { 0, 1, 0, 1 },
 401                 .gpiomute       = 3,
 402                 .needs_tvaudio  = 1,
 403                 .tuner_type     = UNSET,
 404                 .tuner_addr     = ADDR_UNSET,
 405                 .radio_addr     = ADDR_UNSET,
 406         },
 407         [BTTV_BOARD_AVERMEDIA] = {
 408                 .name           = "AVerMedia TVPhone",
 409                 .video_inputs   = 3,
 410                 .audio_inputs   = 1,
 411                 .tuner          = 0,
 412                 .svhs           = 3,
 413                 .muxsel         = { 2, 3, 1, 1 },
 414                 .gpiomask       = 0x0f,
 415                 .gpiomux        = { 0x0c, 0x04, 0x08, 0x04 },
 416                 /*                0x04 for some cards ?? */
 417                 .needs_tvaudio  = 1,
 418                 .tuner_type     = UNSET,
 419                 .tuner_addr     = ADDR_UNSET,
 420                 .radio_addr     = ADDR_UNSET,
 421                 .audio_mode_gpio= avermedia_tvphone_audio,
 422                 .has_remote     = 1,
 423         },
 424         [BTTV_BOARD_MATRIX_VISION] = {
 425                 .name           = "MATRIX-Vision MV-Delta",
 426                 .video_inputs   = 5,
 427                 .audio_inputs   = 1,
 428                 .tuner          = UNSET,
 429                 .svhs           = 3,
 430                 .gpiomask       = 0,
 431                 .muxsel         = { 2, 3, 1, 0, 0 },
 432                 .gpiomux        = { 0 },
 433                 .needs_tvaudio  = 1,
 434                 .tuner_type     = UNSET,
 435                 .tuner_addr     = ADDR_UNSET,
 436                 .radio_addr     = ADDR_UNSET,
 437         },
 438
 439         /* ---- card 0x08 ---------------------------------- */
 440         [BTTV_BOARD_FLYVIDEO] = {
 441                 .name           = "Lifeview FlyVideo II (Bt848) LR26 / MAXI TV Video PCI2 LR26",
 442                 .video_inputs   = 4,
 443                 .audio_inputs   = 1,
 444                 .tuner          = 0,
 445                 .svhs           = 2,
 446                 .gpiomask       = 0xc00,
 447                 .muxsel         = { 2, 3, 1, 1 },
 448                 .gpiomux        = { 0, 0xc00, 0x800, 0x400 },
 449                 .gpiomute       = 0xc00,
 450                 .needs_tvaudio  = 1,
 451                 .pll            = PLL_28,
 452                 .tuner_type     = UNSET,
 453                 .tuner_addr     = ADDR_UNSET,
 454                 .radio_addr     = ADDR_UNSET,
 455         },
 456         [BTTV_BOARD_TURBOTV] = {
 457                 .name           = "IMS/IXmicro TurboTV",
 458                 .video_inputs   = 3,
 459                 .audio_inputs   = 1,
 460                 .tuner          = 0,
 461                 .svhs           = 2,
 462                 .gpiomask       = 3,
 463                 .muxsel         = { 2, 3, 1, 1 },
 464                 .gpiomux        = { 1, 1, 2, 3 },
 465                 .needs_tvaudio  = 0,
 466                 .pll            = PLL_28,
 467                 .tuner_type     = TUNER_TEMIC_PAL,
 468                 .tuner_addr     = ADDR_UNSET,
 469                 .radio_addr     = ADDR_UNSET,
 470         },
 471         [BTTV_BOARD_HAUPPAUGE878] = {
 472                 .name           = "Hauppauge (bt878)",
 473                 .video_inputs   = 4,
 474                 .audio_inputs   = 1,
 475                 .tuner          = 0,
 476                 .svhs           = 2,
 477                 .gpiomask       = 0x0f, /* old: 7 */
 478                 .muxsel         = { 2, 0, 1, 1 },
 479                 .gpiomux        = { 0, 1, 2, 3 },
 480                 .gpiomute       = 4,
 481                 .needs_tvaudio  = 1,
 482                 .pll            = PLL_28,
 483                 .tuner_type     = UNSET,
 484                 .tuner_addr     = ADDR_UNSET,
 485                 .radio_addr     = ADDR_UNSET,
 486         },
 487         [BTTV_BOARD_MIROPRO] = {
 488                 .name           = "MIRO PCTV pro",
 489                 .video_inputs   = 3,
 490                 .audio_inputs   = 1,
 491                 .tuner          = 0,
 492                 .svhs           = 2,
 493                 .gpiomask       = 0x3014f,
 494                 .muxsel         = { 2, 3, 1, 1 },
 495                 .gpiomux        = { 0x20001,0x10001, 0, 0 },
 496                 .gpiomute       = 10,
 497                 .needs_tvaudio  = 1,
 498                 .tuner_type     = UNSET,
 499                 .tuner_addr     = ADDR_UNSET,
 500                 .radio_addr     = ADDR_UNSET,
 501         },
 502
 503         /* ---- card 0x0c ---------------------------------- */
 504         [BTTV_BOARD_ADSTECH_TV] = {
 505                 .name           = "ADS Technologies Channel Surfer TV (bt848)",
 506                 .video_inputs   = 3,
 507                 .audio_inputs   = 1,
 508                 .tuner          = 0,
 509                 .svhs           = 2,
 510                 .gpiomask       = 15,
 511                 .muxsel         = { 2, 3, 1, 1 },
 512                 .gpiomux        = { 13, 14, 11, 7 },
 513                 .needs_tvaudio  = 1,
 514                 .tuner_type     = UNSET,
 515                 .tuner_addr     = ADDR_UNSET,
 516                 .radio_addr     = ADDR_UNSET,
 517         },
 518         [BTTV_BOARD_AVERMEDIA98] = {
 519                 .name           = "AVerMedia TVCapture 98",
 520                 .video_inputs   = 3,
 521                 .audio_inputs   = 4,
 522                 .tuner          = 0,
 523                 .svhs           = 2,
 524                 .gpiomask       = 15,
 525                 .muxsel         = { 2, 3, 1, 1 },
 526                 .gpiomux        = { 13, 14, 11, 7 },
 527                 .needs_tvaudio  = 1,
 528                 .msp34xx_alt    = 1,
 529                 .pll            = PLL_28,
 530                 .tuner_type     = TUNER_PHILIPS_PAL,
 531                 .tuner_addr     = ADDR_UNSET,
 532                 .radio_addr     = ADDR_UNSET,
 533                 .audio_mode_gpio= avermedia_tv_stereo_audio,
 534                 .no_gpioirq     = 1,
 535         },
 536         [BTTV_BOARD_VHX] = {
 537                 .name           = "Aimslab Video Highway Xtreme (VHX)",
 538                 .video_inputs   = 3,
 539                 .audio_inputs   = 1,
 540                 .tuner          = 0,
 541                 .svhs           = 2,
 542                 .gpiomask       = 7,
 543                 .muxsel         = { 2, 3, 1, 1 },
 544                 .gpiomux        = { 0, 2, 1, 3 }, /* old: {0, 1, 2, 3, 4} */
 545                 .gpiomute       = 4,
 546                 .needs_tvaudio  = 1,
 547                 .pll            = PLL_28,
 548                 .tuner_type     = UNSET,
 549                 .tuner_addr     = ADDR_UNSET,
 550                 .radio_addr     = ADDR_UNSET,
 551         },
 552         [BTTV_BOARD_ZOLTRIX] = {
 553                 .name           = "Zoltrix TV-Max",
 554                 .video_inputs   = 3,
 555                 .audio_inputs   = 1,
 556                 .tuner          = 0,
 557                 .svhs           = 2,
 558                 .gpiomask       = 15,
 559                 .muxsel         = { 2, 3, 1, 1 },
 560                 .gpiomux        = { 0, 0, 1, 0 },
 561                 .gpiomute       = 10,
 562                 .needs_tvaudio  = 1,
 563                 .tuner_type     = UNSET,
 564                 .tuner_addr     = ADDR_UNSET,
 565                 .radio_addr     = ADDR_UNSET,
 566         },
 567
 568         /* ---- card 0x10 ---------------------------------- */
 569         [BTTV_BOARD_PIXVIEWPLAYTV] = {
 570                 .name           = "Prolink Pixelview PlayTV (bt878)",
 571                 .video_inputs   = 3,
 572                 .audio_inputs   = 1,
 573                 .tuner          = 0,
 574                 .svhs           = 2,
 575                 .gpiomask       = 0x01fe00,
 576                 .muxsel         = { 2, 3, 1, 1 },
 577                 /* 2003-10-20 by "Anton A. Arapov" <arapov@mail.ru> */
 578                 .gpiomux        = { 0x001e00, 0, 0x018000, 0x014000 },
 579                 .gpiomute       = 0x002000,
 580                 .needs_tvaudio  = 1,
 581                 .pll            = PLL_28,
 582                 .tuner_type     = UNSET,
 583                 .tuner_addr     = ADDR_UNSET,
 584                 .radio_addr     = ADDR_UNSET,
 585         },
 586         [BTTV_BOARD_WINVIEW_601] = {
 587                 .name           = "Leadtek WinView 601",
 588                 .video_inputs   = 3,
 589                 .audio_inputs   = 1,
 590                 .tuner          = 0,
 591                 .svhs           = 2,
 592                 .gpiomask       = 0x8300f8,
 593                 .muxsel         = { 2, 3, 1, 1,0 },
 594                 .gpiomux        = { 0x4fa007,0xcfa007,0xcfa007,0xcfa007 },
 595                 .gpiomute       = 0xcfa007,
 596                 .needs_tvaudio  = 1,
 597                 .tuner_type     = UNSET,
 598                 .tuner_addr     = ADDR_UNSET,
 599                 .radio_addr     = ADDR_UNSET,
 600                 .volume_gpio    = winview_volume,
 601                 .has_radio      = 1,
 602         },
 603         [BTTV_BOARD_AVEC_INTERCAP] = {
 604                 .name           = "AVEC Intercapture",
 605                 .video_inputs   = 3,
 606                 .audio_inputs   = 2,
 607                 .tuner          = 0,
 608                 .svhs           = 2,
 609                 .gpiomask       = 0,
 610                 .muxsel         = { 2, 3, 1, 1 },
 611                 .gpiomux        = { 1, 0, 0, 0 },
 612                 .needs_tvaudio  = 1,
 613                 .tuner_type     = UNSET,
 614                 .tuner_addr     = ADDR_UNSET,
 615                 .radio_addr     = ADDR_UNSET,
 616         },
 617         [BTTV_BOARD_LIFE_FLYKIT] = {
 618                 .name           = "Lifeview FlyVideo II EZ /FlyKit LR38 Bt848 (capture only)",
 619                 .video_inputs   = 4,
 620                 .audio_inputs   = 1,
 621                 .tuner          = UNSET,
 622                 .svhs           = UNSET,
 623                 .gpiomask       = 0x8dff00,
 624                 .muxsel         = { 2, 3, 1, 1 },
 625                 .gpiomux        = { 0 },
 626                 .no_msp34xx     = 1,
 627                 .tuner_type     = UNSET,
 628                 .tuner_addr     = ADDR_UNSET,
 629                 .radio_addr     = ADDR_UNSET,
 630         },
 631
 632         /* ---- card 0x14 ---------------------------------- */
 633         [BTTV_BOARD_CEI_RAFFLES] = {
 634                 .name           = "CEI Raffles Card",
 635                 .video_inputs   = 3,
 636                 .audio_inputs   = 3,
 637                 .tuner          = 0,
 638                 .svhs           = 2,
 639                 .muxsel         = { 2, 3, 1, 1 },
 640                 .tuner_type     = UNSET,
 641                 .tuner_addr     = ADDR_UNSET,
 642                 .radio_addr     = ADDR_UNSET,
 643         },
 644         [BTTV_BOARD_CONFERENCETV] = {
 645                 .name           = "Lifeview FlyVideo 98/ Lucky Star Image World ConferenceTV LR50",
 646                 .video_inputs   = 4,
 647                 .audio_inputs   = 2,  /* tuner, line in */
 648                 .tuner          = 0,
 649                 .svhs           = 2,
 650                 .gpiomask       = 0x1800,
 651                 .muxsel         = { 2, 3, 1, 1 },
 652                 .gpiomux        = { 0, 0x800, 0x1000, 0x1000 },
 653                 .gpiomute       = 0x1800,
 654                 .pll            = PLL_28,
 655                 .tuner_type     = TUNER_PHILIPS_PAL_I,
 656                 .tuner_addr     = ADDR_UNSET,
 657                 .radio_addr     = ADDR_UNSET,
 658         },
 659         [BTTV_BOARD_PHOEBE_TVMAS] = {
 660                 .name           = "Askey CPH050/ Phoebe Tv Master + FM",
 661                 .video_inputs   = 3,
 662                 .audio_inputs   = 1,
 663                 .tuner          = 0,
 664                 .svhs           = 2,
 665                 .gpiomask       = 0xc00,
 666                 .muxsel         = { 2, 3, 1, 1 },
 667                 .gpiomux        = { 0, 1, 0x800, 0x400 },
 668                 .gpiomute       = 0xc00,
 669                 .needs_tvaudio  = 1,
 670                 .pll            = PLL_28,
 671                 .tuner_type     = UNSET,
 672                 .tuner_addr     = ADDR_UNSET,
 673                 .radio_addr     = ADDR_UNSET,
 674         },
 675         [BTTV_BOARD_MODTEC_205] = {
 676                 .name           = "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV, bt878",
 677                 .video_inputs   = 3,
 678                 .audio_inputs   = 1,
 679                 .tuner          = 0,
 680                 .svhs           = UNSET,
 681                 .gpiomask       = 7,
 682                 .muxsel         = { 2, 3, -1 },
 683                 .digital_mode   = DIGITAL_MODE_CAMERA,
 684                 .gpiomux        = { 0, 0, 0, 0 },
 685                 .no_msp34xx     = 1,
 686                 .pll            = PLL_28,
 687                 .tuner_type     = TUNER_ALPS_TSBB5_PAL_I,
 688                 .tuner_addr     = ADDR_UNSET,
 689                 .radio_addr     = ADDR_UNSET,
 690         },
 691
 692         /* ---- card 0x18 ---------------------------------- */
 693         [BTTV_BOARD_MAGICTVIEW061] = {
 694                 .name           = "Askey CPH05X/06X (bt878) [many vendors]",
 695                 .video_inputs   = 3,
 696                 .audio_inputs   = 1,
 697                 .tuner          = 0,
 698                 .svhs           = 2,
 699                 .gpiomask       = 0xe00,
 700                 .muxsel         = { 2, 3, 1, 1 },
 701                 .gpiomux        = {0x400, 0x400, 0x400, 0x400 },
 702                 .gpiomute       = 0xc00,
 703                 .needs_tvaudio  = 1,
 704                 .pll            = PLL_28,
 705                 .tuner_type     = UNSET,
 706                 .tuner_addr     = ADDR_UNSET,
 707                 .radio_addr     = ADDR_UNSET,
 708                 .has_remote     = 1,
 709         },
 710         [BTTV_BOARD_VOBIS_BOOSTAR] = {
 711                 .name           = "Terratec TerraTV+ Version 1.0 (Bt848)/ Terra TValue Version 1.0/ Vobis TV-Boostar",
 712                 .video_inputs   = 3,
 713                 .audio_inputs   = 1,
 714                 .tuner          = 0,
 715                 .svhs           = 2,
 716                 .gpiomask       = 0x1f0fff,
 717                 .muxsel         = { 2, 3, 1, 1 },
 718                 .gpiomux        = { 0x20000, 0x30000, 0x10000, 0 },
 719                 .gpiomute       = 0x40000,
 720                 .needs_tvaudio  = 0,
 721                 .tuner_type     = TUNER_PHILIPS_PAL,
 722                 .tuner_addr     = ADDR_UNSET,
 723                 .radio_addr     = ADDR_UNSET,
 724                 .audio_mode_gpio= terratv_audio,
 725         },
 726         [BTTV_BOARD_HAUPPAUG_WCAM] = {
 727                 .name           = "Hauppauge WinCam newer (bt878)",
 728                 .video_inputs   = 4,
 729                 .audio_inputs   = 1,
 730                 .tuner          = 0,
 731                 .svhs           = 3,
 732                 .gpiomask       = 7,
 733                 .muxsel         = { 2, 0, 1, 1 },
 734                 .gpiomux        = { 0, 1, 2, 3 },
 735                 .gpiomute       = 4,
 736                 .needs_tvaudio  = 1,
 737                 .tuner_type     = UNSET,
 738                 .tuner_addr     = ADDR_UNSET,
 739                 .radio_addr     = ADDR_UNSET,
 740         },
 741         [BTTV_BOARD_MAXI] = {
 742                 .name           = "Lifeview FlyVideo 98/ MAXI TV Video PCI2 LR50",
 743                 .video_inputs   = 4,
 744                 .audio_inputs   = 2,
 745                 .tuner          = 0,
 746                 .svhs           = 2,
 747                 .gpiomask       = 0x1800,
 748                 .muxsel         = { 2, 3, 1, 1 },
 749                 .gpiomux        = { 0, 0x800, 0x1000, 0x1000 },
 750                 .gpiomute       = 0x1800,
 751                 .pll            = PLL_28,
 752                 .tuner_type     = TUNER_PHILIPS_SECAM,
 753                 .tuner_addr     = ADDR_UNSET,
 754                 .radio_addr     = ADDR_UNSET,
 755         },
 756
 757         /* ---- card 0x1c ---------------------------------- */
 758         [BTTV_BOARD_TERRATV] = {
 759                 .name           = "Terratec TerraTV+ Version 1.1 (bt878)",
 760                 .video_inputs   = 3,
 761                 .audio_inputs   = 1,
 762                 .tuner          = 0,
 763                 .svhs           = 2,
 764                 .gpiomask       = 0x1f0fff,
 765                 .muxsel         = { 2, 3, 1, 1 },
 766                 .gpiomux        = { 0x20000, 0x30000, 0x10000, 0x00000 },
 767                 .gpiomute       = 0x40000,
 768                 .needs_tvaudio  = 0,
 769                 .tuner_type     = TUNER_PHILIPS_PAL,
 770                 .tuner_addr     = ADDR_UNSET,
 771                 .radio_addr     = ADDR_UNSET,
 772                 .audio_mode_gpio= terratv_audio,
 773                 /* GPIO wiring:
 774                 External 20 pin connector (for Active Radio Upgrade board)
 775                 gpio00: i2c-sda
 776                 gpio01: i2c-scl
 777                 gpio02: om5610-data
 778                 gpio03: om5610-clk
 779                 gpio04: om5610-wre
 780                 gpio05: om5610-stereo
 781                 gpio06: rds6588-davn
 782                 gpio07: Pin 7 n.c.
 783                 gpio08: nIOW
 784                 gpio09+10: nIOR, nSEL ?? (bt878)
 785                         gpio09: nIOR (bt848)
 786                         gpio10: nSEL (bt848)
 787                 Sound Routing:
 788                 gpio16: u2-A0 (1st 4052bt)
 789                 gpio17: u2-A1
 790                 gpio18: u2-nEN
 791                 gpio19: u4-A0 (2nd 4052)
 792                 gpio20: u4-A1
 793                         u4-nEN - GND
 794                 Btspy:
 795                         00000 : Cdrom (internal audio input)
 796                         10000 : ext. Video audio input
 797                         20000 : TV Mono
 798                         a0000 : TV Mono/2
 799                 1a0000 : TV Stereo
 800                         30000 : Radio
 801                         40000 : Mute
 802         */
 803
 804         },
 805         [BTTV_BOARD_PXC200] = {
 806                 /* Jannik Fritsch <jannik@techfak.uni-bielefeld.de> */
 807                 .name           = "Imagenation PXC200",
 808                 .video_inputs   = 5,
 809                 .audio_inputs   = 1,
 810                 .tuner          = UNSET,
 811                 .svhs           = 1, /* was: 4 */
 812                 .gpiomask       = 0,
 813                 .muxsel         = { 2, 3, 1, 0, 0},
 814                 .gpiomux        = { 0 },
 815                 .needs_tvaudio  = 1,
 816                 .tuner_type     = UNSET,
 817                 .tuner_addr     = ADDR_UNSET,
 818                 .radio_addr     = ADDR_UNSET,
 819                 .muxsel_hook    = PXC200_muxsel,
 820
 821         },
 822         [BTTV_BOARD_FLYVIDEO_98] = {
 823                 .name           = "Lifeview FlyVideo 98 LR50",
 824                 .video_inputs   = 4,
 825                 .audio_inputs   = 1,
 826                 .tuner          = 0,
 827                 .svhs           = 2,
 828                 .gpiomask       = 0x1800,  /* 0x8dfe00 */
 829                 .muxsel         = { 2, 3, 1, 1 },
 830                 .gpiomux        = { 0, 0x0800, 0x1000, 0x1000 },
 831                 .gpiomute       = 0x1800,
 832                 .pll            = PLL_28,
 833                 .tuner_type     = UNSET,
 834                 .tuner_addr     = ADDR_UNSET,
 835                 .radio_addr     = ADDR_UNSET,
 836         },
 837         [BTTV_BOARD_IPROTV] = {
 838                 .name           = "Formac iProTV, Formac ProTV I (bt848)",
 839                 .video_inputs   = 4,
 840                 .audio_inputs   = 1,
 841                 .tuner          = 0,
 842                 .svhs           = 3,
 843                 .gpiomask       = 1,
 844                 .muxsel         = { 2, 3, 1, 1 },
 845                 .gpiomux        = { 1, 0, 0, 0 },
 846                 .pll            = PLL_28,
 847                 .tuner_type     = TUNER_PHILIPS_PAL,
 848                 .tuner_addr     = ADDR_UNSET,
 849                 .radio_addr     = ADDR_UNSET,
 850         },
 851
 852         /* ---- card 0x20 ---------------------------------- */
 853         [BTTV_BOARD_INTEL_C_S_PCI] = {
 854                 .name           = "Intel Create and Share PCI/ Smart Video Recorder III",
 855                 .video_inputs   = 4,
 856                 .audio_inputs   = 0,
 857                 .tuner          = UNSET,
 858                 .svhs           = 2,
 859                 .gpiomask       = 0,
 860                 .muxsel         = { 2, 3, 1, 1 },
 861                 .gpiomux        = { 0 },
 862                 .needs_tvaudio  = 0,
 863                 .tuner_type     = TUNER_ABSENT,
 864                 .tuner_addr     = ADDR_UNSET,
 865                 .radio_addr     = ADDR_UNSET,
 866         },
 867         [BTTV_BOARD_TERRATVALUE] = {
 868                 .name           = "Terratec TerraTValue Version Bt878",
 869                 .video_inputs   = 3,
 870                 .audio_inputs   = 1,
 871                 .tuner          = 0,
 872                 .svhs           = 2,
 873                 .gpiomask       = 0xffff00,
 874                 .muxsel         = { 2, 3, 1, 1 },
 875                 .gpiomux        = { 0x500, 0, 0x300, 0x900 },
 876                 .gpiomute       = 0x900,
 877                 .needs_tvaudio  = 1,
 878                 .pll            = PLL_28,
 879                 .tuner_type     = TUNER_PHILIPS_PAL,
 880                 .tuner_addr     = ADDR_UNSET,
 881                 .radio_addr     = ADDR_UNSET,
 882         },
 883         [BTTV_BOARD_WINFAST2000] = {
 884                 .name           = "Leadtek WinFast 2000/ WinFast 2000 XP",
 885                 .video_inputs   = 4,
 886                 .audio_inputs   = 1,
 887                 .tuner          = 0,
 888                 .svhs           = 2,
 889                 .muxsel         = { 2, 3, 1, 1, 0 }, /* TV, CVid, SVid, CVid over SVid connector */
 890                 /* Alexander Varakin <avarakin@hotmail.com> [stereo version] */
 891                 .gpiomask       = 0xb33000,
 892                 .gpiomux        = { 0x122000,0x1000,0x0000,0x620000 },
 893                 .gpiomute       = 0x800000,
 894                 /* Audio Routing for "WinFast 2000 XP" (no tv stereo !)
 895                         gpio23 -- hef4052:nEnable (0x800000)
 896                         gpio12 -- hef4052:A1
 897                         gpio13 -- hef4052:A0
 898                 0x0000: external audio
 899                 0x1000: FM
 900                 0x2000: TV
 901                 0x3000: n.c.
 902                 Note: There exists another variant "Winfast 2000" with tv stereo !?
 903                 Note: eeprom only contains FF and pci subsystem id 107d:6606
 904                 */
 905                 .needs_tvaudio  = 0,
 906                 .pll            = PLL_28,
 907                 .has_radio      = 1,
 908                 .tuner_type     = TUNER_PHILIPS_PAL, /* default for now, gpio reads BFFF06 for Pal bg+dk */
 909                 .tuner_addr     = ADDR_UNSET,
 910                 .radio_addr     = ADDR_UNSET,
 911                 .audio_mode_gpio= winfast2000_audio,
 912                 .has_remote     = 1,
 913         },
 914         [BTTV_BOARD_CHRONOS_VS2] = {
 915                 .name           = "Lifeview FlyVideo 98 LR50 / Chronos Video Shuttle II",
 916                 .video_inputs   = 4,
 917                 .audio_inputs   = 3,
 918                 .tuner          = 0,
 919                 .svhs           = 2,
 920                 .gpiomask       = 0x1800,
 921                 .muxsel         = { 2, 3, 1, 1 },
 922                 .gpiomux        = { 0, 0x800, 0x1000, 0x1000 },
 923                 .gpiomute       = 0x1800,
 924                 .pll            = PLL_28,
 925                 .tuner_type     = UNSET,
 926                 .tuner_addr     = ADDR_UNSET,
 927                 .radio_addr     = ADDR_UNSET,
 928         },
 929
 930         /* ---- card 0x24 ---------------------------------- */
 931         [BTTV_BOARD_TYPHOON_TVIEW] = {
 932                 .name           = "Lifeview FlyVideo 98FM LR50 / Typhoon TView TV/FM Tuner",
 933                 .video_inputs   = 4,
 934                 .audio_inputs   = 3,
 935                 .tuner          = 0,
 936                 .svhs           = 2,
 937                 .gpiomask       = 0x1800,
 938                 .muxsel         = { 2, 3, 1, 1 },
 939                 .gpiomux        = { 0, 0x800, 0x1000, 0x1000 },
 940                 .gpiomute       = 0x1800,
 941                 .pll            = PLL_28,
 942                 .tuner_type     = UNSET,
 943                 .tuner_addr     = ADDR_UNSET,
 944                 .radio_addr     = ADDR_UNSET,
 945                 .has_radio      = 1,
 946         },
 947         [BTTV_BOARD_PXELVWPLTVPRO] = {
 948                 .name           = "Prolink PixelView PlayTV pro",
 949                 .video_inputs   = 3,
 950                 .audio_inputs   = 1,
 951                 .tuner          = 0,
 952                 .svhs           = 2,
 953                 .gpiomask       = 0xff,
 954                 .muxsel         = { 2, 3, 1, 1 },
 955                 .gpiomux        = { 0x21, 0x20, 0x24, 0x2c },
 956                 .gpiomute       = 0x29,
 957                 .no_msp34xx     = 1,
 958                 .pll            = PLL_28,
 959                 .tuner_type     = UNSET,
 960                 .tuner_addr     = ADDR_UNSET,
 961                 .radio_addr     = ADDR_UNSET,
 962         },
 963         [BTTV_BOARD_MAGICTVIEW063] = {
 964                 .name           = "Askey CPH06X TView99",
 965                 .video_inputs   = 4,
 966                 .audio_inputs   = 1,
 967                 .tuner          = 0,
 968                 .svhs           = 2,
 969                 .gpiomask       = 0x551e00,
 970                 .muxsel         = { 2, 3, 1, 0 },
 971                 .gpiomux        = { 0x551400, 0x551200, 0, 0 },
 972                 .gpiomute       = 0x551c00,
 973                 .needs_tvaudio  = 1,
 974                 .pll            = PLL_28,
 975                 .tuner_type     = TUNER_PHILIPS_PAL_I,
 976                 .tuner_addr     = ADDR_UNSET,
 977                 .radio_addr     = ADDR_UNSET,
 978                 .has_remote     = 1,
 979         },
 980         [BTTV_BOARD_PINNACLE] = {
 981                 .name           = "Pinnacle PCTV Studio/Rave",
 982                 .video_inputs   = 3,
 983                 .audio_inputs   = 1,
 984                 .tuner          = 0,
 985                 .svhs           = 2,
 986                 .gpiomask       = 0x03000F,
 987                 .muxsel         = { 2, 3, 1, 1 },
 988                 .gpiomux        = { 2, 0xd0001, 0, 0 },
 989                 .gpiomute       = 1,
 990                 .needs_tvaudio  = 0,
 991                 .pll            = PLL_28,
 992                 .tuner_type     = UNSET,
 993                 .tuner_addr     = ADDR_UNSET,
 994                 .radio_addr     = ADDR_UNSET,
 995         },
 996
 997         /* ---- card 0x28 ---------------------------------- */
 998         [BTTV_BOARD_STB2] = {
 999                 .name           = "STB TV PCI FM, Gateway P/N 6000704 (bt878), 3Dfx VoodooTV 100",
1000                 .video_inputs   = 3,
1001                 .audio_inputs   = 1,
1002                 .tuner          = 0,
1003                 .svhs           = 2,
1004                 .gpiomask       = 7,
1005                 .muxsel         = { 2, 3, 1, 1 },
1006                 .gpiomux        = { 4, 0, 2, 3 },
1007                 .gpiomute       = 1,
1008                 .no_msp34xx     = 1,
1009                 .needs_tvaudio  = 1,
1010                 .tuner_type     = TUNER_PHILIPS_NTSC,
1011                 .tuner_addr     = ADDR_UNSET,
1012                 .radio_addr     = ADDR_UNSET,
1013                 .pll            = PLL_28,
1014                 .has_radio      = 1,
1015         },
1016         [BTTV_BOARD_AVPHONE98] = {
1017                 .name           = "AVerMedia TVPhone 98",
1018                 .video_inputs   = 3,
1019                 .audio_inputs   = 4,
1020                 .tuner          = 0,
1021                 .svhs           = 2,
1022                 .gpiomask       = 15,
1023                 .muxsel         = { 2, 3, 1, 1 },
1024                 .gpiomux        = { 13, 4, 11, 7 },
1025                 .needs_tvaudio  = 1,
1026                 .pll            = PLL_28,
1027                 .tuner_type     = UNSET,
1028                 .tuner_addr     = ADDR_UNSET,
1029                 .radio_addr     = ADDR_UNSET,
1030                 .has_radio      = 1,
1031                 .audio_mode_gpio= avermedia_tvphone_audio,
1032         },
1033         [BTTV_BOARD_PV951] = {
1034                 .name           = "ProVideo PV951", /* pic16c54 */
1035                 .video_inputs   = 3,
1036                 .audio_inputs   = 1,
1037                 .tuner          = 0,
1038                 .svhs           = 2,
1039                 .gpiomask       = 0,
1040                 .muxsel         = { 2, 3, 1, 1},
1041                 .gpiomux        = { 0, 0, 0, 0},
1042                 .needs_tvaudio  = 1,
1043                 .no_msp34xx     = 1,
1044                 .pll            = PLL_28,
1045                 .tuner_type     = TUNER_PHILIPS_PAL_I,
1046                 .tuner_addr     = ADDR_UNSET,
1047                 .radio_addr     = ADDR_UNSET,
1048         },
1049         [BTTV_BOARD_ONAIR_TV] = {
1050                 .name           = "Little OnAir TV",
1051                 .video_inputs   = 3,
1052                 .audio_inputs   = 1,
1053                 .tuner          = 0,
1054                 .svhs           = 2,
1055                 .gpiomask       = 0xe00b,
1056                 .muxsel         = { 2, 3, 1, 1 },
1057                 .gpiomux        = { 0xff9ff6, 0xff9ff6, 0xff1ff7, 0 },
1058                 .gpiomute       = 0xff3ffc,
1059                 .no_msp34xx     = 1,
1060                 .tuner_type     = UNSET,
1061                 .tuner_addr     = ADDR_UNSET,
1062                 .radio_addr     = ADDR_UNSET,
1063         },
1064
1065         /* ---- card 0x2c ---------------------------------- */
1066         [BTTV_BOARD_SIGMA_TVII_FM] = {
1067                 .name           = "Sigma TVII-FM",
1068                 .video_inputs   = 2,
1069                 .audio_inputs   = 1,
1070                 .tuner          = 0,
1071                 .svhs           = UNSET,
1072                 .gpiomask       = 3,
1073                 .muxsel         = { 2, 3, 1, 1 },
1074                 .gpiomux        = { 1, 1, 0, 2 },
1075                 .gpiomute       = 3,
1076                 .no_msp34xx     = 1,
1077                 .pll            = PLL_NONE,
1078                 .tuner_type     = UNSET,
1079                 .tuner_addr     = ADDR_UNSET,
1080                 .radio_addr     = ADDR_UNSET,
1081         },
1082         [BTTV_BOARD_MATRIX_VISION2] = {
1083                 .name           = "MATRIX-Vision MV-Delta 2",
1084                 .video_inputs   = 5,
1085                 .audio_inputs   = 1,
1086                 .tuner          = UNSET,
1087                 .svhs           = 3,
1088                 .gpiomask       = 0,
1089                 .muxsel         = { 2, 3, 1, 0, 0 },
1090                 .gpiomux        = { 0 },
1091                 .no_msp34xx     = 1,
1092                 .pll            = PLL_28,
1093                 .tuner_type     = UNSET,
1094                 .tuner_addr     = ADDR_UNSET,
1095                 .radio_addr     = ADDR_UNSET,
1096         },
1097         [BTTV_BOARD_ZOLTRIX_GENIE] = {
1098                 .name           = "Zoltrix Genie TV/FM",
1099                 .video_inputs   = 3,
1100                 .audio_inputs   = 1,
1101                 .tuner          = 0,
1102                 .svhs           = 2,
1103                 .gpiomask       = 0xbcf03f,
1104                 .muxsel         = { 2, 3, 1, 1 },
1105                 .gpiomux        = { 0xbc803f, 0xbc903f, 0xbcb03f, 0 },
1106                 .gpiomute       = 0xbcb03f,
1107                 .no_msp34xx     = 1,
1108                 .pll            = PLL_28,
1109                 .tuner_type     = TUNER_TEMIC_4039FR5_NTSC,
1110                 .tuner_addr     = ADDR_UNSET,
1111                 .radio_addr     = ADDR_UNSET,
1112         },
1113         [BTTV_BOARD_TERRATVRADIO] = {
1114                 .name           = "Terratec TV/Radio+",
1115                 .video_inputs   = 3,
1116                 .audio_inputs   = 1,
1117                 .tuner          = 0,
1118                 .svhs           = 2,
1119                 .gpiomask       = 0x70000,
1120                 .muxsel         = { 2, 3, 1, 1 },
1121                 .gpiomux        = { 0x20000, 0x30000, 0x10000, 0 },
1122                 .gpiomute       = 0x40000,
1123                 .needs_tvaudio  = 1,
1124                 .no_msp34xx     = 1,
1125                 .pll            = PLL_35,
1126                 .tuner_type     = TUNER_PHILIPS_PAL_I,
1127                 .tuner_addr     = ADDR_UNSET,
1128                 .radio_addr     = ADDR_UNSET,
1129                 .has_radio      = 1,
1130         },
1131
1132         /* ---- card 0x30 ---------------------------------- */
1133         [BTTV_BOARD_DYNALINK] = {
1134                 .name           = "Askey CPH03x/ Dynalink Magic TView",
1135                 .video_inputs   = 3,
1136                 .audio_inputs   = 1,
1137                 .tuner          = 0,
1138                 .svhs           = 2,
1139                 .gpiomask       = 15,
1140                 .muxsel         = { 2, 3, 1, 1 },
1141                 .gpiomux        = {2,0,0,0 },
1142                 .gpiomute       = 1,
1143                 .needs_tvaudio  = 1,
1144                 .pll            = PLL_28,
1145                 .tuner_type     = UNSET,
1146                 .tuner_addr     = ADDR_UNSET,
1147                 .radio_addr     = ADDR_UNSET,
1148         },
1149         [BTTV_BOARD_GVBCTV3PCI] = {
1150                 .name           = "IODATA GV-BCTV3/PCI",
1151                 .video_inputs   = 3,
1152                 .audio_inputs   = 1,
1153                 .tuner          = 0,
1154                 .svhs           = 2,
1155                 .gpiomask       = 0x010f00,
1156                 .muxsel         = {2, 3, 0, 0 },
1157                 .gpiomux        = {0x10000, 0, 0x10000, 0 },
1158                 .no_msp34xx     = 1,
1159                 .pll            = PLL_28,
1160                 .tuner_type     = TUNER_ALPS_TSHC6_NTSC,
1161                 .tuner_addr     = ADDR_UNSET,
1162                 .radio_addr     = ADDR_UNSET,
1163                 .audio_mode_gpio= gvbctv3pci_audio,
1164         },
1165         [BTTV_BOARD_PXELVWPLTVPAK] = {
1166                 .name           = "Prolink PV-BT878P+4E / PixelView PlayTV PAK / Lenco MXTV-9578 CP",
1167                 .video_inputs   = 5,
1168                 .audio_inputs   = 1,
1169                 .tuner          = 0,
1170                 .svhs           = 3,
1171                 .gpiomask       = 0xAA0000,
1172                 .muxsel         = { 2,3,1,1,-1 },
1173                 .digital_mode   = DIGITAL_MODE_CAMERA,
1174                 .gpiomux        = { 0x20000, 0, 0x80000, 0x80000 },
1175                 .gpiomute       = 0xa8000,
1176                 .no_msp34xx     = 1,
1177                 .pll            = PLL_28,
1178                 .tuner_type     = TUNER_PHILIPS_PAL_I,
1179                 .tuner_addr     = ADDR_UNSET,
1180                 .radio_addr     = ADDR_UNSET,
1181                 .has_remote     = 1,
1182                 /* GPIO wiring: (different from Rev.4C !)
1183                         GPIO17: U4.A0 (first hef4052bt)
1184                         GPIO19: U4.A1
1185                         GPIO20: U5.A1 (second hef4052bt)
1186                         GPIO21: U4.nEN
1187                         GPIO22: BT832 Reset Line
1188                         GPIO23: A5,A0, U5,nEN
1189                 Note: At i2c=0x8a is a Bt832 chip, which changes to 0x88 after being reset via GPIO22
1190                 */
1191         },
1192         [BTTV_BOARD_EAGLE] = {
1193                 .name           = "Eagle Wireless Capricorn2 (bt878A)",
1194                 .video_inputs   = 4,
1195                 .audio_inputs   = 1,
1196                 .tuner          = 0,
1197                 .svhs           = 2,
1198                 .gpiomask       = 7,
1199                 .muxsel         = { 2, 0, 1, 1 },
1200                 .gpiomux        = { 0, 1, 2, 3 },
1201                 .gpiomute       = 4,
1202                 .pll            = PLL_28,
1203                 .tuner_type     = UNSET /* TUNER_ALPS_TMDH2_NTSC */,
1204                 .tuner_addr     = ADDR_UNSET,
1205                 .radio_addr     = ADDR_UNSET,
1206         },
1207
1208         /* ---- card 0x34 ---------------------------------- */
1209         [BTTV_BOARD_PINNACLEPRO] = {
1210                 /* David Härdeman <david@2gen.com> */
1211                 .name           = "Pinnacle PCTV Studio Pro",
1212                 .video_inputs   = 4,
1213                 .audio_inputs   = 1,
1214                 .tuner          = 0,
1215                 .svhs           = 3,
1216                 .gpiomask       = 0x03000F,
1217                 .muxsel         = { 2, 3, 1, 1 },
1218                 .gpiomux        = { 1, 0xd0001, 0, 0 },
1219                 .gpiomute       = 10,
1220                                 /* sound path (5 sources):
1221                                 MUX1 (mask 0x03), Enable Pin 0x08 (0=enable, 1=disable)
1222                                         0= ext. Audio IN
1223                                         1= from MUX2
1224                                         2= Mono TV sound from Tuner
1225                                         3= not connected
1226                                 MUX2 (mask 0x30000):
1227                                         0,2,3= from MSP34xx
1228                                         1= FM stereo Radio from Tuner */
1229                 .needs_tvaudio  = 0,
1230                 .pll            = PLL_28,
1231                 .tuner_type     = UNSET,
1232                 .tuner_addr     = ADDR_UNSET,
1233                 .radio_addr     = ADDR_UNSET,
1234         },
1235         [BTTV_BOARD_TVIEW_RDS_FM] = {
1236                 /* Claas Langbehn <claas@bigfoot.com>,
1237                 Sven Grothklags <sven@upb.de> */
1238                 .name           = "Typhoon TView RDS + FM Stereo / KNC1 TV Station RDS",
1239                 .video_inputs   = 4,
1240                 .audio_inputs   = 3,
1241                 .tuner          = 0,
1242                 .svhs           = 2,
1243                 .gpiomask       = 0x1c,
1244                 .muxsel         = { 2, 3, 1, 1 },
1245                 .gpiomux        = { 0, 0, 0x10, 8 },
1246                 .gpiomute       = 4,
1247                 .needs_tvaudio  = 1,
1248                 .pll            = PLL_28,
1249                 .tuner_type     = TUNER_PHILIPS_PAL,
1250                 .tuner_addr     = ADDR_UNSET,
1251                 .radio_addr     = ADDR_UNSET,
1252                 .has_radio      = 1,
1253         },
1254         [BTTV_BOARD_LIFETEC_9415] = {
1255                 /* Tim Röstermundt <rosterm@uni-muenster.de>
1256                 in de.comp.os.unix.linux.hardware:
1257                         options bttv card=0 pll=1 radio=1 gpiomask=0x18e0
1258                         gpiomux =0x44c71f,0x44d71f,0,0x44d71f,0x44dfff
1259                         options tuner type=5 */
1260                 .name           = "Lifeview FlyVideo 2000 /FlyVideo A2/ Lifetec LT 9415 TV [LR90]",
1261                 .video_inputs   = 4,
1262                 .audio_inputs   = 1,
1263                 .tuner          = 0,
1264                 .svhs           = 2,
1265                 .gpiomask       = 0x18e0,
1266                 .muxsel         = { 2, 3, 1, 1 },
1267                 .gpiomux        = { 0x0000,0x0800,0x1000,0x1000 },
1268                 .gpiomute       = 0x18e0,
1269                         /* For cards with tda9820/tda9821:
1270                                 0x0000: Tuner normal stereo
1271                                 0x0080: Tuner A2 SAP (second audio program = Zweikanalton)
1272                                 0x0880: Tuner A2 stereo */
1273                 .pll            = PLL_28,
1274                 .tuner_type     = UNSET,
1275                 .tuner_addr     = ADDR_UNSET,
1276                 .radio_addr     = ADDR_UNSET,
1277         },
1278         [BTTV_BOARD_BESTBUY_EASYTV] = {
1279                 /* Miguel Angel Alvarez <maacruz@navegalia.com>
1280                 old Easy TV BT848 version (model CPH031) */
1281                 .name           = "Askey CPH031/ BESTBUY Easy TV",
1282                 .video_inputs   = 4,
1283                 .audio_inputs   = 1,
1284                 .tuner          = 0,
1285                 .svhs           = 2,
1286                 .gpiomask       = 0xF,
1287                 .muxsel         = { 2, 3, 1, 0 },
1288                 .gpiomux        = { 2, 0, 0, 0 },
1289                 .gpiomute       = 10,
1290                 .needs_tvaudio  = 0,
1291                 .pll            = PLL_28,
1292                 .tuner_type     = TUNER_TEMIC_PAL,
1293                 .tuner_addr     = ADDR_UNSET,
1294                 .radio_addr     = ADDR_UNSET,
1295         },
1296
1297         /* ---- card 0x38 ---------------------------------- */
1298         [BTTV_BOARD_FLYVIDEO_98FM] = {
1299                 /* Gordon Heydon <gjheydon@bigfoot.com ('98) */
1300                 .name           = "Lifeview FlyVideo 98FM LR50",
1301                 .video_inputs   = 4,
1302                 .audio_inputs   = 3,
1303                 .tuner          = 0,
1304                 .svhs           = 2,
1305                 .gpiomask       = 0x1800,
1306                 .muxsel         = { 2, 3, 1, 1 },
1307                 .gpiomux        = { 0, 0x800, 0x1000, 0x1000 },
1308                 .gpiomute       = 0x1800,
1309                 .pll            = PLL_28,
1310                 .tuner_type     = TUNER_PHILIPS_PAL,
1311                 .tuner_addr     = ADDR_UNSET,
1312                 .radio_addr     = ADDR_UNSET,
1313         },
1314                 /* This is the ultimate cheapo capture card
1315                 * just a BT848A on a small PCB!
1316                 * Steve Hosgood <steve@equiinet.com> */
1317         [BTTV_BOARD_GRANDTEC] = {
1318                 .name           = "GrandTec 'Grand Video Capture' (Bt848)",
1319                 .video_inputs   = 2,
1320                 .audio_inputs   = 0,
1321                 .tuner          = UNSET,
1322                 .svhs           = 1,
1323                 .gpiomask       = 0,
1324                 .muxsel         = { 3, 1 },
1325                 .gpiomux        = { 0 },
1326                 .needs_tvaudio  = 0,
1327                 .no_msp34xx     = 1,
1328                 .pll            = PLL_35,
1329                 .tuner_type     = UNSET,
1330                 .tuner_addr     = ADDR_UNSET,
1331                 .radio_addr     = ADDR_UNSET,
1332         },
1333         [BTTV_BOARD_ASKEY_CPH060] = {
1334                 /* Daniel Herrington <daniel.herrington@home.com> */
1335                 .name           = "Askey CPH060/ Phoebe TV Master Only (No FM)",
1336                 .video_inputs   = 3,
1337                 .audio_inputs   = 1,
1338                 .tuner          = 0,
1339                 .svhs           = 2,
1340                 .gpiomask       = 0xe00,
1341                 .muxsel         = { 2, 3, 1, 1},
1342                 .gpiomux        = { 0x400, 0x400, 0x400, 0x400 },
1343                 .gpiomute       = 0x800,
1344                 .needs_tvaudio  = 1,
1345                 .pll            = PLL_28,
1346                 .tuner_type     = TUNER_TEMIC_4036FY5_NTSC,
1347                 .tuner_addr     = ADDR_UNSET,
1348                 .radio_addr     = ADDR_UNSET,
1349         },
1350         [BTTV_BOARD_ASKEY_CPH03X] = {
1351                 /* Matti Mottus <mottus@physic.ut.ee> */
1352                 .name           = "Askey CPH03x TV Capturer",
1353                 .video_inputs   = 4,
1354                 .audio_inputs   = 1,
1355                 .tuner          = 0,
1356                 .svhs           = 2,
1357                 .gpiomask       = 0x03000F,
1358                 .muxsel         = { 2, 3, 1, 0 },
1359                 .gpiomux        = { 2, 0, 0, 0 },
1360                 .gpiomute       = 1,
1361                 .pll            = PLL_28,
1362                 .tuner_type     = TUNER_TEMIC_PAL,
1363                 .tuner_addr     = ADDR_UNSET,
1364                 .radio_addr     = ADDR_UNSET,
1365         },
1366
1367         /* ---- card 0x3c ---------------------------------- */
1368         [BTTV_BOARD_MM100PCTV] = {
1369                 /* Philip Blundell <philb@gnu.org> */
1370                 .name           = "Modular Technology MM100PCTV",
1371                 .video_inputs   = 2,
1372                 .audio_inputs   = 2,
1373                 .tuner          = 0,
1374                 .svhs           = UNSET,
1375                 .gpiomask       = 11,
1376                 .muxsel         = { 2, 3, 1, 1 },
1377                 .gpiomux        = { 2, 0, 0, 1 },
1378                 .gpiomute       = 8,
1379                 .pll            = PLL_35,
1380                 .tuner_type     = TUNER_TEMIC_PAL,
1381                 .tuner_addr     = ADDR_UNSET,
1382                 .radio_addr     = ADDR_UNSET,
1383         },
1384         [BTTV_BOARD_GMV1] = {
1385                 /* Adrian Cox <adrian@humboldt.co.uk */
1386                 .name           = "AG Electronics GMV1",
1387                 .video_inputs   = 2,
1388                 .audio_inputs   = 0,
1389                 .tuner          = UNSET,
1390                 .svhs           = 1,
1391                 .gpiomask       = 0xF,
1392                 .muxsel         = { 2, 2 },
1393                 .gpiomux        = { },
1394                 .no_msp34xx     = 1,
1395                 .needs_tvaudio  = 0,
1396                 .pll            = PLL_28,
1397                 .tuner_type     = UNSET,
1398                 .tuner_addr     = ADDR_UNSET,
1399                 .radio_addr     = ADDR_UNSET,
1400         },
1401         [BTTV_BOARD_BESTBUY_EASYTV2] = {
1402                 /* Miguel Angel Alvarez <maacruz@navegalia.com>
1403                 new Easy TV BT878 version (model CPH061)
1404                 special thanks to Informatica Mieres for providing the card */
1405                 .name           = "Askey CPH061/ BESTBUY Easy TV (bt878)",
1406                 .video_inputs   = 3,
1407                 .audio_inputs   = 2,
1408                 .tuner          = 0,
1409                 .svhs           = 2,
1410                 .gpiomask       = 0xFF,
1411                 .muxsel         = { 2, 3, 1, 0 },
1412                 .gpiomux        = { 1, 0, 4, 4 },
1413                 .gpiomute       = 9,
1414                 .needs_tvaudio  = 0,
1415                 .pll            = PLL_28,
1416                 .tuner_type     = TUNER_PHILIPS_PAL,
1417                 .tuner_addr     = ADDR_UNSET,
1418                 .radio_addr     = ADDR_UNSET,
1419         },
1420         [BTTV_BOARD_ATI_TVWONDER] = {
1421                 /* Lukas Gebauer <geby@volny.cz> */
1422                 .name           = "ATI TV-Wonder",
1423                 .video_inputs   = 3,
1424                 .audio_inputs   = 1,
1425                 .tuner          = 0,
1426                 .svhs           = 2,
1427                 .gpiomask       = 0xf03f,
1428                 .muxsel         = { 2, 3, 1, 0 },
1429                 .gpiomux        = { 0xbffe, 0, 0xbfff, 0 },
1430                 .gpiomute       = 0xbffe,
1431                 .pll            = PLL_28,
1432                 .tuner_type     = TUNER_TEMIC_4006FN5_MULTI_PAL,
1433                 .tuner_addr     = ADDR_UNSET,
1434                 .radio_addr     = ADDR_UNSET,
1435         },
1436
1437         /* ---- card 0x40 ---------------------------------- */
1438         [BTTV_BOARD_ATI_TVWONDERVE] = {
1439                 /* Lukas Gebauer <geby@volny.cz> */
1440                 .name           = "ATI TV-Wonder VE",
1441                 .video_inputs   = 2,
1442                 .audio_inputs   = 1,
1443                 .tuner          = 0,
1444                 .svhs           = UNSET,
1445                 .gpiomask       = 1,
1446                 .muxsel         = { 2, 3, 0, 1 },
1447                 .gpiomux        = { 0, 0, 1, 0 },
1448                 .no_msp34xx     = 1,
1449                 .pll            = PLL_28,
1450                 .tuner_type     = TUNER_TEMIC_4006FN5_MULTI_PAL,
1451                 .tuner_addr     = ADDR_UNSET,
1452                 .radio_addr     = ADDR_UNSET,
1453         },
1454         [BTTV_BOARD_FLYVIDEO2000] = {
1455                 /* DeeJay <deejay@westel900.net (2000S) */
1456                 .name           = "Lifeview FlyVideo 2000S LR90",
1457                 .video_inputs   = 3,
1458                 .audio_inputs   = 3,
1459                 .tuner          = 0,
1460                 .svhs           = 2,
1461                 .gpiomask       = 0x18e0,
1462                 .muxsel         = { 2, 3, 0, 1 },
1463                                 /* Radio changed from 1e80 to 0x800 to make
1464                                 FlyVideo2000S in .hu happy (gm)*/
1465                                 /* -dk-???: set mute=0x1800 for tda9874h daughterboard */
1466                 .gpiomux        = { 0x0000,0x0800,0x1000,0x1000 },
1467                 .gpiomute       = 0x1800,
1468                 .audio_mode_gpio= fv2000s_audio,
1469                 .no_msp34xx     = 1,
1470                 .no_tda9875     = 1,
1471                 .needs_tvaudio  = 1,
1472                 .pll            = PLL_28,
1473                 .tuner_type     = TUNER_PHILIPS_PAL,
1474                 .tuner_addr     = ADDR_UNSET,
1475                 .radio_addr     = ADDR_UNSET,
1476         },
1477         [BTTV_BOARD_TERRATVALUER] = {
1478                 .name           = "Terratec TValueRadio",
1479                 .video_inputs   = 3,
1480                 .audio_inputs   = 1,
1481                 .tuner          = 0,
1482                 .svhs           = 2,
1483                 .gpiomask       = 0xffff00,
1484                 .muxsel         = { 2, 3, 1, 1 },
1485                 .gpiomux        = { 0x500, 0x500, 0x300, 0x900 },
1486                 .gpiomute       = 0x900,
1487                 .needs_tvaudio  = 1,
1488                 .pll            = PLL_28,
1489                 .tuner_type     = TUNER_PHILIPS_PAL,
1490                 .tuner_addr     = ADDR_UNSET,
1491                 .radio_addr     = ADDR_UNSET,
1492                 .has_radio      = 1,
1493         },
1494         [BTTV_BOARD_GVBCTV4PCI] = {
1495                 /* TANAKA Kei <peg00625@nifty.com> */
1496                 .name           = "IODATA GV-BCTV4/PCI",
1497                 .video_inputs   = 3,
1498                 .audio_inputs   = 1,
1499                 .tuner          = 0,
1500                 .svhs           = 2,
1501                 .gpiomask       = 0x010f00,
1502                 .muxsel         = {2, 3, 0, 0 },
1503                 .gpiomux        = {0x10000, 0, 0x10000, 0 },
1504                 .no_msp34xx     = 1,
1505                 .pll            = PLL_28,
1506                 .tuner_type     = TUNER_SHARP_2U5JF5540_NTSC,
1507                 .tuner_addr     = ADDR_UNSET,
1508                 .radio_addr     = ADDR_UNSET,
1509                 .audio_mode_gpio= gvbctv3pci_audio,
1510         },
1511
1512         /* ---- card 0x44 ---------------------------------- */
1513         [BTTV_BOARD_VOODOOTV_FM] = {
1514                 .name           = "3Dfx VoodooTV FM (Euro)",
1515                 /* try "insmod msp3400 simple=0" if you have
1516                 * sound problems with this card. */
1517                 .video_inputs   = 4,
1518                 .audio_inputs   = 1,
1519                 .tuner          = 0,
1520                 .svhs           = UNSET,
1521                 .gpiomask       = 0x4f8a00,
1522                 /* 0x100000: 1=MSP enabled (0=disable again)
1523                 * 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC) */
1524                 .gpiomux        = {0x947fff, 0x987fff,0x947fff,0x947fff },
1525                 .gpiomute       = 0x947fff,
1526                 /* tvtuner, radio,   external,internal, mute,  stereo
1527                 * tuner, Composit, SVid, Composit-on-Svid-adapter */
1528                 .muxsel         = { 2, 3 ,0 ,1 },
1529                 .tuner_type     = TUNER_MT2032,
1530                 .tuner_addr     = ADDR_UNSET,
1531                 .radio_addr     = ADDR_UNSET,
1532                 .pll            = PLL_28,
1533                 .has_radio      = 1,
1534         },
1535         [BTTV_BOARD_VOODOOTV_200] = {
1536                 .name           = "VoodooTV 200 (USA)",
1537                 /* try "insmod msp3400 simple=0" if you have
1538                 * sound problems with this card. */
1539                 .video_inputs   = 4,
1540                 .audio_inputs   = 1,
1541                 .tuner          = 0,
1542                 .svhs           = UNSET,
1543                 .gpiomask       = 0x4f8a00,
1544                 /* 0x100000: 1=MSP enabled (0=disable again)
1545                 * 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC) */
1546                 .gpiomux        = {0x947fff, 0x987fff,0x947fff,0x947fff },
1547                 .gpiomute       = 0x947fff,
1548                 /* tvtuner, radio,   external,internal, mute,  stereo
1549                 * tuner, Composit, SVid, Composit-on-Svid-adapter */
1550                 .muxsel         = { 2, 3 ,0 ,1 },
1551                 .tuner_type     = TUNER_MT2032,
1552                 .tuner_addr     = ADDR_UNSET,
1553                 .radio_addr     = ADDR_UNSET,
1554                 .pll            = PLL_28,
1555                 .has_radio      = 1,
1556         },
1557         [BTTV_BOARD_AIMMS] = {
1558                 /* Philip Blundell <pb@nexus.co.uk> */
1559                 .name           = "Active Imaging AIMMS",
1560                 .video_inputs   = 1,
1561                 .audio_inputs   = 0,
1562                 .tuner          = UNSET,
1563                 .tuner_type     = UNSET,
1564                 .tuner_addr     = ADDR_UNSET,
1565                 .radio_addr     = ADDR_UNSET,
1566                 .pll            = PLL_28,
1567                 .muxsel         = { 2 },
1568                 .gpiomask       = 0
1569         },
1570         [BTTV_BOARD_PV_BT878P_PLUS] = {
1571                 /* Tomasz Pyra <hellfire@sedez.iq.pl> */
1572                 .name           = "Prolink Pixelview PV-BT878P+ (Rev.4C,8E)",
1573                 .video_inputs   = 3,
1574                 .audio_inputs   = 4,
1575                 .tuner          = 0,
1576                 .svhs           = 2,
1577                 .gpiomask       = 15,
1578                 .muxsel         = { 2, 3, 1, 1 },
1579                 .gpiomux        = { 0, 0, 11, 7 }, /* TV and Radio with same GPIO ! */
1580                 .gpiomute       = 13,
1581                 .needs_tvaudio  = 1,
1582                 .pll            = PLL_28,
1583                 .tuner_type     = TUNER_LG_PAL_I_FM,
1584                 .tuner_addr     = ADDR_UNSET,
1585                 .radio_addr     = ADDR_UNSET,
1586                 .has_remote     = 1,
1587                 /* GPIO wiring:
1588                         GPIO0: U4.A0 (hef4052bt)
1589                         GPIO1: U4.A1
1590                         GPIO2: U4.A1 (second hef4052bt)
1591                         GPIO3: U4.nEN, U5.A0, A5.nEN
1592                         GPIO8-15: vrd866b ?
1593                 */
1594         },
1595         [BTTV_BOARD_FLYVIDEO98EZ] = {
1596                 .name           = "Lifeview FlyVideo 98EZ (capture only) LR51",
1597                 .video_inputs   = 4,
1598                 .audio_inputs   = 0,
1599                 .tuner          = UNSET,
1600                 .svhs           = 2,
1601                 .muxsel         = { 2, 3, 1, 1 }, /* AV1, AV2, SVHS, CVid adapter on SVHS */
1602                 .pll            = PLL_28,
1603                 .no_msp34xx     = 1,
1604                 .tuner_type     = UNSET,
1605                 .tuner_addr     = ADDR_UNSET,
1606                 .radio_addr     = ADDR_UNSET,
1607         },
1608
1609         /* ---- card 0x48 ---------------------------------- */
1610         [BTTV_BOARD_PV_BT878P_9B] = {
1611                 /* Dariusz Kowalewski <darekk@automex.pl> */
1612                 .name           = "Prolink Pixelview PV-BT878P+9B (PlayTV Pro rev.9B FM+NICAM)",
1613                 .video_inputs   = 4,
1614                 .audio_inputs   = 1,
1615                 .tuner          = 0,
1616                 .svhs           = 2,
1617                 .gpiomask       = 0x3f,
1618                 .muxsel         = { 2, 3, 1, 1 },
1619                 .gpiomux        = { 0x01, 0x00, 0x03, 0x03 },
1620                 .gpiomute       = 0x09,
1621                 .needs_tvaudio  = 1,
1622                 .no_msp34xx     = 1,
1623                 .no_tda9875     = 1,
1624                 .pll            = PLL_28,
1625                 .tuner_type     = TUNER_PHILIPS_PAL,
1626                 .tuner_addr     = ADDR_UNSET,
1627                 .radio_addr     = ADDR_UNSET,
1628                 .audio_mode_gpio= pvbt878p9b_audio, /* Note: not all cards have stereo */
1629                 .has_radio      = 1,  /* Note: not all cards have radio */
1630                 .has_remote     = 1,
1631                 /* GPIO wiring:
1632                         GPIO0: A0 hef4052
1633                         GPIO1: A1 hef4052
1634                         GPIO3: nEN hef4052
1635                         GPIO8-15: vrd866b
1636                         GPIO20,22,23: R30,R29,R28
1637                 */
1638         },
1639         [BTTV_BOARD_SENSORAY311] = {
1640                 /* Clay Kunz <ckunz@mail.arc.nasa.gov> */
1641                 /* you must jumper JP5 for the card to work */
1642                 .name           = "Sensoray 311",
1643                 .video_inputs   = 5,
1644                 .audio_inputs   = 0,
1645                 .tuner          = UNSET,
1646                 .svhs           = 4,
1647                 .gpiomask       = 0,
1648                 .muxsel         = { 2, 3, 1, 0, 0 },
1649                 .gpiomux        = { 0 },
1650                 .needs_tvaudio  = 0,
1651                 .tuner_type     = UNSET,
1652                 .tuner_addr     = ADDR_UNSET,
1653                 .radio_addr     = ADDR_UNSET,
1654         },
1655         [BTTV_BOARD_RV605] = {
1656                 /* Miguel Freitas <miguel@cetuc.puc-rio.br> */
1657                 .name           = "RemoteVision MX (RV605)",
1658                 .video_inputs   = 16,
1659                 .audio_inputs   = 0,
1660                 .tuner          = UNSET,
1661                 .svhs           = UNSET,
1662                 .gpiomask       = 0x00,
1663                 .gpiomask2      = 0x07ff,
1664                 .muxsel         = { 0x33, 0x13, 0x23, 0x43, 0xf3, 0x73, 0xe3, 0x03,
1665                                 0xd3, 0xb3, 0xc3, 0x63, 0x93, 0x53, 0x83, 0xa3 },
1666                 .no_msp34xx     = 1,
1667                 .no_tda9875     = 1,
1668                 .tuner_type     = UNSET,
1669                 .tuner_addr     = ADDR_UNSET,
1670                 .radio_addr     = ADDR_UNSET,
1671                 .muxsel_hook    = rv605_muxsel,
1672         },
1673         [BTTV_BOARD_POWERCLR_MTV878] = {
1674                 .name           = "Powercolor MTV878/ MTV878R/ MTV878F",
1675                 .video_inputs   = 3,
1676                 .audio_inputs   = 2,
1677                 .tuner          = 0,
1678                 .svhs           = 2,
1679                 .gpiomask       = 0x1C800F,  /* Bit0-2: Audio select, 8-12:remote control 14:remote valid 15:remote reset */
1680                 .muxsel         = { 2, 1, 1, },
1681                 .gpiomux        = { 0, 1, 2, 2 },
1682                 .gpiomute       = 4,
1683                 .needs_tvaudio  = 0,
1684                 .tuner_type     = TUNER_PHILIPS_PAL,
1685                 .tuner_addr     = ADDR_UNSET,
1686                 .radio_addr     = ADDR_UNSET,
1687                 .pll            = PLL_28,
1688                 .has_radio      = 1,
1689         },
1690
1691         /* ---- card 0x4c ---------------------------------- */
1692         [BTTV_BOARD_WINDVR] = {
1693                 /* Masaki Suzuki <masaki@btree.org> */
1694                 .name           = "Canopus WinDVR PCI (COMPAQ Presario 3524JP, 5112JP)",
1695                 .video_inputs   = 3,
1696                 .audio_inputs   = 1,
1697                 .tuner          = 0,
1698                 .svhs           = 2,
1699                 .gpiomask       = 0x140007,
1700                 .muxsel         = { 2, 3, 1, 1 },
1701                 .gpiomux        = { 0, 1, 2, 3 },
1702                 .gpiomute       = 4,
1703                 .tuner_type     = TUNER_PHILIPS_NTSC,
1704                 .tuner_addr     = ADDR_UNSET,
1705                 .radio_addr     = ADDR_UNSET,
1706                 .audio_mode_gpio= windvr_audio,
1707         },
1708         [BTTV_BOARD_GRANDTEC_MULTI] = {
1709                 .name           = "GrandTec Multi Capture Card (Bt878)",
1710                 .video_inputs   = 4,
1711                 .audio_inputs   = 0,
1712                 .tuner          = UNSET,
1713                 .svhs           = UNSET,
1714                 .gpiomask       = 0,
1715                 .muxsel         = { 2, 3, 1, 0 },
1716                 .gpiomux        = { 0 },
1717                 .needs_tvaudio  = 0,
1718                 .no_msp34xx     = 1,
1719                 .pll            = PLL_28,
1720                 .tuner_type     = UNSET,
1721                 .tuner_addr     = ADDR_UNSET,
1722                 .radio_addr     = ADDR_UNSET,
1723         },
1724         [BTTV_BOARD_KWORLD] = {
1725                 .name           = "Jetway TV/Capture JW-TV878-FBK, Kworld KW-TV878RF",
1726                 .video_inputs   = 4,
1727                 .audio_inputs   = 3,
1728                 .tuner          = 0,
1729                 .svhs           = 2,
1730                 .gpiomask       = 7,
1731                 .muxsel         = { 2, 3, 1, 1 },   /* Tuner, SVid, SVHS, SVid to SVHS connector */
1732                 .gpiomux        = { 0, 0, 4, 4 },/* Yes, this tuner uses the same audio output for TV and FM radio!
1733                                                 * This card lacks external Audio In, so we mute it on Ext. & Int.
1734                                                 * The PCB can take a sbx1637/sbx1673, wiring unknown.
1735                                                 * This card lacks PCI subsystem ID, sigh.
1736                                                 * gpiomux =1: lower volume, 2+3: mute
1737                                                 * btwincap uses 0x80000/0x80003
1738                                                 */
1739                 .gpiomute       = 4,
1740                 .needs_tvaudio  = 0,
1741                 .no_msp34xx     = 1,
1742                 .pll            = PLL_28,
1743                 .tuner_type     = TUNER_PHILIPS_PAL,
1744                 .tuner_addr     = ADDR_UNSET,
1745                 .radio_addr     = ADDR_UNSET,
1746                 /* Samsung TCPA9095PC27A (BG+DK), philips compatible, w/FM, stereo and
1747                 radio signal strength indicators work fine. */
1748                 .has_radio      = 1,
1749                 /* GPIO Info:
1750                         GPIO0,1:   HEF4052 A0,A1
1751                         GPIO2:     HEF4052 nENABLE
1752                         GPIO3-7:   n.c.
1753                         GPIO8-13:  IRDC357 data0-5 (data6 n.c. ?) [chip not present on my card]
1754                         GPIO14,15: ??
1755                         GPIO16-21: n.c.
1756                         GPIO22,23: ??
1757                         ??       : mtu8b56ep microcontroller for IR (GPIO wiring unknown)*/
1758         },
1759         [BTTV_BOARD_DSP_TCVIDEO] = {
1760                 /* Arthur Tetzlaff-Deas, DSP Design Ltd <software@dspdesign.com> */
1761                 .name           = "DSP Design TCVIDEO",
1762                 .video_inputs   = 4,
1763                 .svhs           = UNSET,
1764                 .muxsel         = { 2, 3, 1, 0 },
1765                 .pll            = PLL_28,
1766                 .tuner_type     = UNSET,
1767                 .tuner_addr     = ADDR_UNSET,
1768                 .radio_addr     = ADDR_UNSET,
1769         },
1770
1771                 /* ---- card 0x50 ---------------------------------- */
1772         [BTTV_BOARD_HAUPPAUGEPVR] = {
1773                 .name           = "Hauppauge WinTV PVR",
1774                 .video_inputs   = 4,
1775                 .audio_inputs   = 1,
1776                 .tuner          = 0,
1777                 .svhs           = 2,
1778                 .muxsel         = { 2, 0, 1, 1 },
1779                 .needs_tvaudio  = 1,
1780                 .pll            = PLL_28,
1781                 .tuner_type     = UNSET,
1782                 .tuner_addr     = ADDR_UNSET,
1783                 .radio_addr     = ADDR_UNSET,
1784
1785                 .gpiomask       = 7,
1786                 .gpiomux        = {7},
1787         },
1788         [BTTV_BOARD_GVBCTV5PCI] = {
1789                 .name           = "IODATA GV-BCTV5/PCI",
1790                 .video_inputs   = 3,
1791                 .audio_inputs   = 1,
1792                 .tuner          = 0,
1793                 .svhs           = 2,
1794                 .gpiomask       = 0x0f0f80,
1795                 .muxsel         = {2, 3, 1, 0 },
1796                 .gpiomux        = {0x030000, 0x010000, 0, 0 },
1797                 .gpiomute       = 0x020000,
1798                 .no_msp34xx     = 1,
1799                 .pll            = PLL_28,
1800                 .tuner_type     = TUNER_PHILIPS_NTSC_M,
1801                 .tuner_addr     = ADDR_UNSET,
1802                 .radio_addr     = ADDR_UNSET,
1803                 .audio_mode_gpio= gvbctv5pci_audio,
1804                 .has_radio      = 1,
1805         },
1806         [BTTV_BOARD_OSPREY1x0] = {
1807                 .name           = "Osprey 100/150 (878)", /* 0x1(2|3)-45C6-C1 */
1808                 .video_inputs   = 4,                  /* id-inputs-clock */
1809                 .audio_inputs   = 0,
1810                 .tuner          = UNSET,
1811                 .svhs           = 3,
1812                 .muxsel         = { 3, 2, 0, 1 },
1813                 .pll            = PLL_28,
1814                 .tuner_type     = UNSET,
1815                 .tuner_addr     = ADDR_UNSET,
1816                 .radio_addr     = ADDR_UNSET,
1817                 .no_msp34xx     = 1,
1818                 .no_tda9875     = 1,
1819                 .no_tda7432     = 1,
1820         },
1821         [BTTV_BOARD_OSPREY1x0_848] = {
1822                 .name           = "Osprey 100/150 (848)", /* 0x04-54C0-C1 & older boards */
1823                 .video_inputs   = 3,
1824                 .audio_inputs   = 0,
1825                 .tuner          = UNSET,
1826                 .svhs           = 2,
1827                 .muxsel         = { 2, 3, 1 },
1828                 .pll            = PLL_28,
1829                 .tuner_type     = UNSET,
1830                 .tuner_addr     = ADDR_UNSET,
1831                 .radio_addr     = ADDR_UNSET,
1832                 .no_msp34xx     = 1,
1833                 .no_tda9875     = 1,
1834                 .no_tda7432     = 1,
1835         },
1836
1837                 /* ---- card 0x54 ---------------------------------- */
1838         [BTTV_BOARD_OSPREY101_848] = {
1839                 .name           = "Osprey 101 (848)", /* 0x05-40C0-C1 */
1840                 .video_inputs   = 2,
1841                 .audio_inputs   = 0,
1842                 .tuner          = UNSET,
1843                 .svhs           = 1,
1844                 .muxsel         = { 3, 1 },
1845                 .pll            = PLL_28,
1846                 .tuner_type     = UNSET,
1847                 .tuner_addr     = ADDR_UNSET,
1848                 .radio_addr     = ADDR_UNSET,
1849                 .no_msp34xx     = 1,
1850                 .no_tda9875     = 1,
1851                 .no_tda7432     = 1,
1852         },
1853         [BTTV_BOARD_OSPREY1x1] = {
1854                 .name           = "Osprey 101/151",       /* 0x1(4|5)-0004-C4 */
1855                 .video_inputs   = 1,
1856                 .audio_inputs   = 0,
1857                 .tuner          = UNSET,
1858                 .svhs           = UNSET,
1859                 .muxsel         = { 0 },
1860                 .pll            = PLL_28,
1861                 .tuner_type     = UNSET,
1862                 .tuner_addr     = ADDR_UNSET,
1863                 .radio_addr     = ADDR_UNSET,
1864                 .no_msp34xx     = 1,
1865                 .no_tda9875     = 1,
1866                 .no_tda7432     = 1,
1867         },
1868         [BTTV_BOARD_OSPREY1x1_SVID] = {
1869                 .name           = "Osprey 101/151 w/ svid",  /* 0x(16|17|20)-00C4-C1 */
1870                 .video_inputs   = 2,
1871                 .audio_inputs   = 0,
1872                 .tuner          = UNSET,
1873                 .svhs           = 1,
1874                 .muxsel         = { 0, 1 },
1875                 .pll            = PLL_28,
1876                 .tuner_type     = UNSET,
1877                 .tuner_addr     = ADDR_UNSET,
1878                 .radio_addr     = ADDR_UNSET,
1879                 .no_msp34xx     = 1,
1880                 .no_tda9875     = 1,
1881                 .no_tda7432     = 1,
1882         },
1883         [BTTV_BOARD_OSPREY2xx] = {
1884                 .name           = "Osprey 200/201/250/251",  /* 0x1(8|9|E|F)-0004-C4 */
1885                 .video_inputs   = 1,
1886                 .audio_inputs   = 1,
1887                 .tuner          = UNSET,
1888                 .svhs           = UNSET,
1889                 .muxsel         = { 0 },
1890                 .pll            = PLL_28,
1891                 .tuner_type     = UNSET,
1892                 .tuner_addr     = ADDR_UNSET,
1893                 .radio_addr     = ADDR_UNSET,
1894                 .no_msp34xx     = 1,
1895                 .no_tda9875     = 1,
1896                 .no_tda7432     = 1,
1897         },
1898
1899                 /* ---- card 0x58 ---------------------------------- */
1900         [BTTV_BOARD_OSPREY2x0_SVID] = {
1901                 .name           = "Osprey 200/250",   /* 0x1(A|B)-00C4-C1 */
1902                 .video_inputs   = 2,
1903                 .audio_inputs   = 1,
1904                 .tuner          = UNSET,
1905                 .svhs           = 1,
1906                 .muxsel         = { 0, 1 },
1907                 .pll            = PLL_28,
1908                 .tuner_type     = UNSET,
1909                 .tuner_addr     = ADDR_UNSET,
1910                 .radio_addr     = ADDR_UNSET,
1911                 .no_msp34xx     = 1,
1912                 .no_tda9875     = 1,
1913                 .no_tda7432     = 1,
1914         },
1915         [BTTV_BOARD_OSPREY2x0] = {
1916                 .name           = "Osprey 210/220/230",   /* 0x1(A|B)-04C0-C1 */
1917                 .video_inputs   = 2,
1918                 .audio_inputs   = 1,
1919                 .tuner          = UNSET,
1920                 .svhs           = 1,
1921                 .muxsel         = { 2, 3 },
1922                 .pll            = PLL_28,
1923                 .tuner_type     = UNSET,
1924                 .tuner_addr     = ADDR_UNSET,
1925                 .radio_addr     = ADDR_UNSET,
1926                 .no_msp34xx     = 1,
1927                 .no_tda9875     = 1,
1928                 .no_tda7432     = 1,
1929         },
1930         [BTTV_BOARD_OSPREY500] = {
1931                 .name           = "Osprey 500",   /* 500 */
1932                 .video_inputs   = 2,
1933                 .audio_inputs   = 1,
1934                 .tuner          = UNSET,
1935                 .svhs           = 1,
1936                 .muxsel         = { 2, 3 },
1937                 .pll            = PLL_28,
1938                 .tuner_type     = UNSET,
1939                 .tuner_addr     = ADDR_UNSET,
1940                 .radio_addr     = ADDR_UNSET,
1941                 .no_msp34xx     = 1,
1942                 .no_tda9875     = 1,
1943                 .no_tda7432     = 1,
1944         },
1945         [BTTV_BOARD_OSPREY540] = {
1946                 .name           = "Osprey 540",   /* 540 */
1947                 .video_inputs   = 4,
1948                 .audio_inputs   = 1,
1949                 .tuner          = UNSET,
1950                 .pll            = PLL_28,
1951                 .tuner_type     = UNSET,
1952                 .tuner_addr     = ADDR_UNSET,
1953                 .radio_addr     = ADDR_UNSET,
1954                 .no_msp34xx     = 1,
1955                 .no_tda9875     = 1,
1956                 .no_tda7432     = 1,
1957         },
1958
1959                 /* ---- card 0x5C ---------------------------------- */
1960         [BTTV_BOARD_OSPREY2000] = {
1961                 .name           = "Osprey 2000",  /* 2000 */
1962                 .video_inputs   = 2,
1963                 .audio_inputs   = 1,
1964                 .tuner          = UNSET,
1965                 .svhs           = 1,
1966                 .muxsel         = { 2, 3 },
1967                 .pll            = PLL_28,
1968                 .tuner_type     = UNSET,
1969                 .tuner_addr     = ADDR_UNSET,
1970                 .radio_addr     = ADDR_UNSET,
1971                 .no_msp34xx     = 1,
1972                 .no_tda9875     = 1,
1973                 .no_tda7432     = 1,      /* must avoid, conflicts with the bt860 */
1974         },
1975         [BTTV_BOARD_IDS_EAGLE] = {
1976                 /* M G Berberich <berberic@forwiss.uni-passau.de> */
1977                 .name           = "IDS Eagle",
1978                 .video_inputs   = 4,
1979                 .audio_inputs   = 0,
1980                 .tuner          = UNSET,
1981                 .tuner_type     = UNSET,
1982                 .tuner_addr     = ADDR_UNSET,
1983                 .radio_addr     = ADDR_UNSET,
1984                 .svhs           = UNSET,
1985                 .gpiomask       = 0,
1986                 .muxsel         = { 0, 1, 2, 3 },
1987                 .muxsel_hook    = eagle_muxsel,
1988                 .no_msp34xx     = 1,
1989                 .no_tda9875     = 1,
1990                 .pll            = PLL_28,
1991         },
1992         [BTTV_BOARD_PINNACLESAT] = {
1993                 .name           = "Pinnacle PCTV Sat",
1994                 .video_inputs   = 2,
1995                 .audio_inputs   = 0,
1996                 .svhs           = 1,
1997                 .tuner          = UNSET,
1998                 .tuner_type     = UNSET,
1999                 .tuner_addr     = ADDR_UNSET,
2000                 .radio_addr     = ADDR_UNSET,
2001                 .no_msp34xx     = 1,
2002                 .no_tda9875     = 1,
2003                 .no_tda7432     = 1,
2004                 .muxsel         = { 3, 1 },
2005                 .pll            = PLL_28,
2006                 .no_gpioirq     = 1,
2007                 .has_dvb        = 1,
2008         },
2009         [BTTV_BOARD_FORMAC_PROTV] = {
2010                 .name           = "Formac ProTV II (bt878)",
2011                 .video_inputs   = 4,
2012                 .audio_inputs   = 1,
2013                 .tuner          = 0,
2014                 .svhs           = 3,
2015                 .gpiomask       = 2,
2016                 /* TV, Comp1, Composite over SVID con, SVID */
2017                 .muxsel         = { 2, 3, 1, 1 },
2018                 .gpiomux        = { 2, 2, 0, 0 },
2019                 .pll            = PLL_28,
2020                 .has_radio      = 1,
2021                 .tuner_type     = TUNER_PHILIPS_PAL,
2022                 .tuner_addr     = ADDR_UNSET,
2023                 .radio_addr     = ADDR_UNSET,
2024         /* sound routing:
2025                 GPIO=0x00,0x01,0x03: mute (?)
2026                 0x02: both TV and radio (tuner: FM1216/I)
2027                 The card has onboard audio connectors labeled "cdrom" and "board",
2028                 not soldered here, though unknown wiring.
2029                 Card lacks: external audio in, pci subsystem id.
2030         */
2031         },
2032
2033                 /* ---- card 0x60 ---------------------------------- */
2034         [BTTV_BOARD_MACHTV] = {
2035                 .name           = "MachTV",
2036                 .video_inputs   = 3,
2037                 .audio_inputs   = 1,
2038                 .tuner          = 0,
2039                 .svhs           = UNSET,
2040                 .gpiomask       = 7,
2041                 .muxsel         = { 2, 3, 1, 1},
2042                 .gpiomux        = { 0, 1, 2, 3},
2043                 .gpiomute       = 4,
2044                 .needs_tvaudio  = 1,
2045                 .tuner_type     = TUNER_PHILIPS_PAL,
2046                 .tuner_addr     = ADDR_UNSET,
2047                 .radio_addr     = ADDR_UNSET,
2048                 .pll            = PLL_28,
2049         },
2050         [BTTV_BOARD_EURESYS_PICOLO] = {
2051                 .name           = "Euresys Picolo",
2052                 .video_inputs   = 3,
2053                 .audio_inputs   = 0,
2054                 .tuner          = UNSET,
2055                 .svhs           = 2,
2056                 .gpiomask       = 0,
2057                 .no_msp34xx     = 1,
2058                 .no_tda9875     = 1,
2059                 .no_tda7432     = 1,
2060                 .muxsel         = { 2, 0, 1},
2061                 .pll            = PLL_28,
2062                 .tuner_type     = UNSET,
2063                 .tuner_addr     = ADDR_UNSET,
2064                 .radio_addr     = ADDR_UNSET,
2065         },
2066         [BTTV_BOARD_PV150] = {
2067                 /* Luc Van Hoeylandt <luc@e-magic.be> */
2068                 .name           = "ProVideo PV150", /* 0x4f */
2069                 .video_inputs   = 2,
2070                 .audio_inputs   = 0,
2071                 .tuner          = UNSET,
2072                 .svhs           = UNSET,
2073                 .gpiomask       = 0,
2074                 .muxsel         = { 2, 3 },
2075                 .gpiomux        = { 0 },
2076                 .needs_tvaudio  = 0,
2077                 .no_msp34xx     = 1,
2078                 .pll            = PLL_28,
2079                 .tuner_type     = UNSET,
2080                 .tuner_addr     = ADDR_UNSET,
2081                 .radio_addr     = ADDR_UNSET,
2082         },
2083         [BTTV_BOARD_AD_TVK503] = {
2084                 /* Hiroshi Takekawa <sian@big.or.jp> */
2085                 /* This card lacks subsystem ID */
2086                 .name           = "AD-TVK503", /* 0x63 */
2087                 .video_inputs   = 4,
2088                 .audio_inputs   = 1,
2089                 .tuner          = 0,
2090                 .svhs           = 2,
2091                 .gpiomask       = 0x001e8007,
2092                 .muxsel         = { 2, 3, 1, 0 },
2093                 /*                  Tuner, Radio, external, internal, off,  on */
2094                 .gpiomux        = { 0x08,  0x0f,  0x0a,     0x08 },
2095                 .gpiomute       = 0x0f,
2096                 .needs_tvaudio  = 0,
2097                 .no_msp34xx     = 1,
2098                 .pll            = PLL_28,
2099                 .tuner_type     = TUNER_PHILIPS_NTSC,
2100                 .tuner_addr     = ADDR_UNSET,
2101                 .radio_addr     = ADDR_UNSET,
2102                 .audio_mode_gpio= adtvk503_audio,
2103         },
2104
2105                 /* ---- card 0x64 ---------------------------------- */
2106         [BTTV_BOARD_HERCULES_SM_TV] = {
2107                 .name           = "Hercules Smart TV Stereo",
2108                 .video_inputs   = 4,
2109                 .audio_inputs   = 1,
2110                 .tuner          = 0,
2111                 .svhs           = 2,
2112                 .gpiomask       = 0x00,
2113                 .muxsel         = { 2, 3, 1, 1 },
2114                 .needs_tvaudio  = 1,
2115                 .no_msp34xx     = 1,
2116                 .pll            = PLL_28,
2117                 .tuner_type     = TUNER_PHILIPS_PAL,
2118                 .tuner_addr     = ADDR_UNSET,
2119                 .radio_addr     = ADDR_UNSET,
2120                 /* Notes:
2121                 - card lacks subsystem ID
2122                 - stereo variant w/ daughter board with tda9874a @0xb0
2123                 - Audio Routing:
2124                         always from tda9874 independent of GPIO (?)
2125                         external line in: unknown
2126                 - Other chips: em78p156elp @ 0x96 (probably IR remote control)
2127                         hef4053 (instead 4052) for unknown function
2128                 */
2129         },
2130         [BTTV_BOARD_PACETV] = {
2131                 .name           = "Pace TV & Radio Card",
2132                 .video_inputs   = 4,
2133                 .audio_inputs   = 1,
2134                 .tuner          = 0,
2135                 .svhs           = 2,
2136                 .muxsel         = { 2, 3, 1, 1 }, /* Tuner, CVid, SVid, CVid over SVid connector */
2137                 .gpiomask       = 0,
2138                 .no_tda9875     = 1,
2139                 .no_tda7432     = 1,
2140                 .tuner_type     = TUNER_PHILIPS_PAL_I,
2141                 .tuner_addr     = ADDR_UNSET,
2142                 .radio_addr     = ADDR_UNSET,
2143                 .has_radio      = 1,
2144                 .pll            = PLL_28,
2145                 /* Bt878, Bt832, FI1246 tuner; no pci subsystem id
2146                 only internal line out: (4pin header) RGGL
2147                 Radio must be decoded by msp3410d (not routed through)*/
2148                 /*
2149                 .digital_mode   = DIGITAL_MODE_CAMERA,  todo!
2150                 */
2151         },
2152         [BTTV_BOARD_IVC200] = {
2153                 /* Chris Willing <chris@vislab.usyd.edu.au> */
2154                 .name           = "IVC-200",
2155                 .video_inputs   = 1,
2156                 .audio_inputs   = 0,
2157                 .tuner          = UNSET,
2158                 .tuner_type     = UNSET,
2159                 .tuner_addr     = ADDR_UNSET,
2160                 .radio_addr     = ADDR_UNSET,
2161                 .svhs           = UNSET,
2162                 .gpiomask       = 0xdf,
2163                 .muxsel         = { 2 },
2164                 .pll            = PLL_28,
2165         },
2166         [BTTV_BOARD_XGUARD] = {
2167                 .name           = "Grand X-Guard / Trust 814PCI",
2168                 .video_inputs   = 16,
2169                 .audio_inputs   = 0,
2170                 .tuner          = UNSET,
2171                 .svhs           = UNSET,
2172                 .tuner_type     = TUNER_ABSENT,
2173                 .tuner_addr     = ADDR_UNSET,
2174                 .radio_addr     = ADDR_UNSET,
2175                 .gpiomask2      = 0xff,
2176                 .muxsel         = { 2,2,2,2, 3,3,3,3, 1,1,1,1, 0,0,0,0 },
2177                 .muxsel_hook    = xguard_muxsel,
2178                 .no_msp34xx     = 1,
2179                 .no_tda9875     = 1,
2180                 .no_tda7432     = 1,
2181                 .pll            = PLL_28,
2182         },
2183
2184                 /* ---- card 0x68 ---------------------------------- */
2185         [BTTV_BOARD_NEBULA_DIGITV] = {
2186                 .name           = "Nebula Electronics DigiTV",
2187                 .video_inputs   = 1,
2188                 .tuner          = UNSET,
2189                 .svhs           = UNSET,
2190                 .muxsel         = { 2, 3, 1, 0 },
2191                 .no_msp34xx     = 1,
2192                 .no_tda9875     = 1,
2193                 .no_tda7432     = 1,
2194                 .pll            = PLL_28,
2195                 .tuner_type     = UNSET,
2196                 .tuner_addr     = ADDR_UNSET,
2197                 .radio_addr     = ADDR_UNSET,
2198                 .has_dvb        = 1,
2199                 .has_remote     = 1,
2200                 .gpiomask       = 0x1b,
2201                 .no_gpioirq     = 1,
2202         },
2203         [BTTV_BOARD_PV143] = {
2204                 /* Jorge Boncompte - DTI2 <jorge@dti2.net> */
2205                 .name           = "ProVideo PV143",
2206                 .video_inputs   = 4,
2207                 .audio_inputs   = 0,
2208                 .tuner          = UNSET,
2209                 .svhs           = UNSET,
2210                 .gpiomask       = 0,
2211                 .muxsel         = { 2, 3, 1, 0 },
2212                 .gpiomux        = { 0 },
2213                 .needs_tvaudio  = 0,
2214                 .no_msp34xx     = 1,
2215                 .pll            = PLL_28,
2216                 .tuner_type     = UNSET,
2217                 .tuner_addr     = ADDR_UNSET,
2218                 .radio_addr     = ADDR_UNSET,
2219         },
2220         [BTTV_BOARD_VD009X1_MINIDIN] = {
2221                 /* M.Klahr@phytec.de */
2222                 .name           = "PHYTEC VD-009-X1 MiniDIN (bt878)",
2223                 .video_inputs   = 4,
2224                 .audio_inputs   = 0,
2225                 .tuner          = UNSET, /* card has no tuner */
2226                 .svhs           = 3,
2227                 .gpiomask       = 0x00,
2228                 .muxsel         = { 2, 3, 1, 0 },
2229                 .gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2230                 .needs_tvaudio  = 1,
2231                 .pll            = PLL_28,
2232                 .tuner_type     = UNSET,
2233                 .tuner_addr     = ADDR_UNSET,
2234                 .radio_addr     = ADDR_UNSET,
2235         },
2236         [BTTV_BOARD_VD009X1_COMBI] = {
2237                 .name           = "PHYTEC VD-009-X1 Combi (bt878)",
2238                 .video_inputs   = 4,
2239                 .audio_inputs   = 0,
2240                 .tuner          = UNSET, /* card has no tuner */
2241                 .svhs           = 3,
2242                 .gpiomask       = 0x00,
2243                 .muxsel         = { 2, 3, 1, 1 },
2244                 .gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2245                 .needs_tvaudio  = 1,
2246                 .pll            = PLL_28,
2247                 .tuner_type     = UNSET,
2248                 .tuner_addr     = ADDR_UNSET,
2249                 .radio_addr     = ADDR_UNSET,
2250         },
2251
2252                 /* ---- card 0x6c ---------------------------------- */
2253         [BTTV_BOARD_VD009_MINIDIN] = {
2254                 .name           = "PHYTEC VD-009 MiniDIN (bt878)",
2255                 .video_inputs   = 10,
2256                 .audio_inputs   = 0,
2257                 .tuner          = UNSET, /* card has no tuner */
2258                 .svhs           = 9,
2259                 .gpiomask       = 0x00,
2260                 .gpiomask2      = 0x03, /* gpiomask2 defines the bits used to switch audio
2261                                         via the upper nibble of muxsel. here: used for
2262                                         xternal video-mux */
2263                 .muxsel         = { 0x02, 0x12, 0x22, 0x32, 0x03, 0x13, 0x23, 0x33, 0x01, 0x00 },
2264                 .gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2265                 .needs_tvaudio  = 1,
2266                 .pll            = PLL_28,
2267                 .tuner_type     = UNSET,
2268                 .tuner_addr     = ADDR_UNSET,
2269                 .radio_addr     = ADDR_UNSET,
2270         },
2271         [BTTV_BOARD_VD009_COMBI] = {
2272                 .name           = "PHYTEC VD-009 Combi (bt878)",
2273                 .video_inputs   = 10,
2274                 .audio_inputs   = 0,
2275                 .tuner          = UNSET, /* card has no tuner */
2276                 .svhs           = 9,
2277                 .gpiomask       = 0x00,
2278                 .gpiomask2      = 0x03, /* gpiomask2 defines the bits used to switch audio
2279                                         via the upper nibble of muxsel. here: used for
2280                                         xternal video-mux */
2281                 .muxsel         = { 0x02, 0x12, 0x22, 0x32, 0x03, 0x13, 0x23, 0x33, 0x01, 0x01 },
2282                 .gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2283                 .needs_tvaudio  = 1,
2284                 .pll            = PLL_28,
2285                 .tuner_type     = UNSET,
2286                 .tuner_addr     = ADDR_UNSET,
2287                 .radio_addr     = ADDR_UNSET,
2288         },
2289         [BTTV_BOARD_IVC100] = {
2290                 .name           = "IVC-100",
2291                 .video_inputs   = 4,
2292                 .audio_inputs   = 0,
2293                 .tuner          = UNSET,
2294                 .tuner_type     = UNSET,
2295                 .tuner_addr     = ADDR_UNSET,
2296                 .radio_addr     = ADDR_UNSET,
2297                 .svhs           = UNSET,
2298                 .gpiomask       = 0xdf,
2299                 .muxsel         = { 2, 3, 1, 0 },
2300                 .pll            = PLL_28,
2301         },
2302         [BTTV_BOARD_IVC120] = {
2303                 /* IVC-120G - Alan Garfield <alan@fromorbit.com> */
2304                 .name           = "IVC-120G",
2305                 .video_inputs   = 16,
2306                 .audio_inputs   = 0,    /* card has no audio */
2307                 .tuner          = UNSET,   /* card has no tuner */
2308                 .tuner_type     = UNSET,
2309                 .tuner_addr     = ADDR_UNSET,
2310                 .radio_addr     = ADDR_UNSET,
2311                 .svhs           = UNSET,   /* card has no svhs */
2312                 .needs_tvaudio  = 0,
2313                 .no_msp34xx     = 1,
2314                 .no_tda9875     = 1,
2315                 .no_tda7432     = 1,
2316                 .gpiomask       = 0x00,
2317                 .muxsel         = { 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08,
2318                                 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, 0x10 },
2319                 .muxsel_hook    = ivc120_muxsel,
2320                 .pll            = PLL_28,
2321         },
2322
2323                 /* ---- card 0x70 ---------------------------------- */
2324         [BTTV_BOARD_PC_HDTV] = {
2325                 .name           = "pcHDTV HD-2000 TV",
2326                 .video_inputs   = 4,
2327                 .audio_inputs   = 1,
2328                 .tuner          = 0,
2329                 .svhs           = 2,
2330                 .muxsel         = { 2, 3, 1, 0 },
2331                 .tuner_type     = TUNER_PHILIPS_FCV1236D,
2332                 .tuner_addr     = ADDR_UNSET,
2333                 .radio_addr     = ADDR_UNSET,
2334                 .has_dvb        = 1,
2335         },
2336         [BTTV_BOARD_TWINHAN_DST] = {
2337                 .name           = "Twinhan DST + clones",
2338                 .no_msp34xx     = 1,
2339                 .no_tda9875     = 1,
2340                 .no_tda7432     = 1,
2341                 .tuner_type     = TUNER_ABSENT,
2342                 .tuner_addr     = ADDR_UNSET,
2343                 .radio_addr     = ADDR_UNSET,
2344                 .no_video       = 1,
2345                 .has_dvb        = 1,
2346         },
2347         [BTTV_BOARD_WINFASTVC100] = {
2348                 .name           = "Winfast VC100",
2349                 .video_inputs   = 3,
2350                 .audio_inputs   = 0,
2351                 .svhs           = 1,
2352                 .tuner          = UNSET,
2353                 .muxsel         = { 3, 1, 1, 3 }, /* Vid In, SVid In, Vid over SVid in connector */
2354                 .no_msp34xx     = 1,
2355                 .no_tda9875     = 1,
2356                 .no_tda7432     = 1,
2357                 .tuner_type     = TUNER_ABSENT,
2358                 .tuner_addr     = ADDR_UNSET,
2359                 .radio_addr     = ADDR_UNSET,
2360                 .pll            = PLL_28,
2361         },
2362         [BTTV_BOARD_TEV560] = {
2363                 .name           = "Teppro TEV-560/InterVision IV-560",
2364                 .video_inputs   = 3,
2365                 .audio_inputs   = 1,
2366                 .tuner          = 0,
2367                 .svhs           = 2,
2368                 .gpiomask       = 3,
2369                 .muxsel         = { 2, 3, 1, 1 },
2370                 .gpiomux        = { 1, 1, 1, 1 },
2371                 .needs_tvaudio  = 1,
2372                 .tuner_type     = TUNER_PHILIPS_PAL,
2373                 .tuner_addr     = ADDR_UNSET,
2374                 .radio_addr     = ADDR_UNSET,
2375                 .pll            = PLL_35,
2376         },
2377
2378                 /* ---- card 0x74 ---------------------------------- */
2379         [BTTV_BOARD_SIMUS_GVC1100] = {
2380                 .name           = "SIMUS GVC1100",
2381                 .video_inputs   = 4,
2382                 .audio_inputs   = 0,
2383                 .tuner          = UNSET,
2384                 .svhs           = UNSET,
2385                 .tuner_type     = UNSET,
2386                 .tuner_addr     = ADDR_UNSET,
2387                 .radio_addr     = ADDR_UNSET,
2388                 .pll            = PLL_28,
2389                 .muxsel         = { 2, 2, 2, 2 },
2390                 .gpiomask       = 0x3F,
2391                 .muxsel_hook    = gvc1100_muxsel,
2392         },
2393         [BTTV_BOARD_NGSTV_PLUS] = {
2394                 /* Carlos Silva r3pek@r3pek.homelinux.org || card 0x75 */
2395                 .name           = "NGS NGSTV+",
2396                 .video_inputs   = 3,
2397                 .tuner          = 0,
2398                 .svhs           = 2,
2399                 .gpiomask       = 0x008007,
2400                 .muxsel         = { 2, 3, 0, 0 },
2401                 .gpiomux        = { 0, 0, 0, 0 },
2402                 .gpiomute       = 0x000003,
2403                 .pll            = PLL_28,
2404                 .tuner_type     = TUNER_PHILIPS_PAL,
2405                 .tuner_addr     = ADDR_UNSET,
2406                 .radio_addr     = ADDR_UNSET,
2407                 .has_remote     = 1,
2408         },
2409         [BTTV_BOARD_LMLBT4] = {
2410                 /* http://linuxmedialabs.com */
2411                 .name           = "LMLBT4",
2412                 .video_inputs   = 4, /* IN1,IN2,IN3,IN4 */
2413                 .audio_inputs   = 0,
2414                 .tuner          = UNSET,
2415                 .svhs           = UNSET,
2416                 .muxsel         = { 2, 3, 1, 0 },
2417                 .no_msp34xx     = 1,
2418                 .no_tda9875     = 1,
2419                 .no_tda7432     = 1,
2420                 .needs_tvaudio  = 0,
2421                 .tuner_type     = UNSET,
2422                 .tuner_addr     = ADDR_UNSET,
2423                 .radio_addr     = ADDR_UNSET,
2424         },
2425         [BTTV_BOARD_TEKRAM_M205] = {
2426                 /* Helmroos Harri <harri.helmroos@pp.inet.fi> */
2427                 .name           = "Tekram M205 PRO",
2428                 .video_inputs   = 3,
2429                 .audio_inputs   = 1,
2430                 .tuner          = 0,
2431                 .tuner_type     = TUNER_PHILIPS_PAL,
2432                 .tuner_addr     = ADDR_UNSET,
2433                 .radio_addr     = ADDR_UNSET,
2434                 .svhs           = 2,
2435                 .needs_tvaudio  = 0,
2436                 .gpiomask       = 0x68,
2437                 .muxsel         = { 2, 3, 1 },
2438                 .gpiomux        = { 0x68, 0x68, 0x61, 0x61 },
2439                 .pll            = PLL_28,
2440         },
2441
2442                 /* ---- card 0x78 ---------------------------------- */
2443         [BTTV_BOARD_CONTVFMI] = {
2444                 /* Javier Cendan Ares <jcendan@lycos.es> */
2445                 /* bt878 TV + FM without subsystem ID */
2446                 .name           = "Conceptronic CONTVFMi",
2447                 .video_inputs   = 3,
2448                 .audio_inputs   = 1,
2449                 .tuner          = 0,
2450                 .svhs           = 2,
2451                 .gpiomask       = 0x008007,
2452                 .muxsel         = { 2, 3, 1, 1 },
2453                 .gpiomux        = { 0, 1, 2, 2 },
2454                 .gpiomute       = 3,
2455                 .needs_tvaudio  = 0,
2456                 .pll            = PLL_28,
2457                 .tuner_type     = TUNER_PHILIPS_PAL,
2458                 .tuner_addr     = ADDR_UNSET,
2459                 .radio_addr     = ADDR_UNSET,
2460                 .has_remote     = 1,
2461                 .has_radio      = 1,
2462         },
2463         [BTTV_BOARD_PICOLO_TETRA_CHIP] = {
2464                 /*Eric DEBIEF <debief@telemsa.com>*/
2465                 /*EURESYS Picolo Tetra : 4 Conexant Fusion 878A, no audio, video input set with analog multiplexers GPIO controled*/
2466                 /* adds picolo_tetra_muxsel(), picolo_tetra_init(), the folowing declaration strucure, and #define BTTV_BOARD_PICOLO_TETRA_CHIP*/
2467                 /*0x79 in bttv.h*/
2468                 .name           = "Euresys Picolo Tetra",
2469                 .video_inputs   = 4,
2470                 .audio_inputs   = 0,
2471                 .tuner          = UNSET,
2472                 .svhs           = UNSET,
2473                 .gpiomask       = 0,
2474                 .gpiomask2      = 0x3C<<16,/*Set the GPIO[18]->GPIO[21] as output pin.==> drive the video inputs through analog multiplexers*/
2475                 .no_msp34xx     = 1,
2476                 .no_tda9875     = 1,
2477                 .no_tda7432     = 1,
2478                 .muxsel         = {2,2,2,2},/*878A input is always MUX0, see above.*/
2479                 .gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2480                 .pll            = PLL_28,
2481                 .needs_tvaudio  = 0,
2482                 .muxsel_hook    = picolo_tetra_muxsel,/*Required as it doesn't follow the classic input selection policy*/
2483                 .tuner_type     = UNSET,
2484                 .tuner_addr     = ADDR_UNSET,
2485                 .radio_addr     = ADDR_UNSET,
2486         },
2487         [BTTV_BOARD_SPIRIT_TV] = {
2488                 /* Spirit TV Tuner from http://spiritmodems.com.au */
2489                 /* Stafford Goodsell <surge@goliath.homeunix.org> */
2490                 .name           = "Spirit TV Tuner",
2491                 .video_inputs   = 3,
2492                 .audio_inputs   = 1,
2493                 .tuner          = 0,
2494                 .svhs           = 2,
2495                 .gpiomask       = 0x0000000f,
2496                 .muxsel         = { 2, 1, 1 },
2497                 .gpiomux        = { 0x02, 0x00, 0x00, 0x00 },
2498                 .tuner_type     = TUNER_TEMIC_PAL,
2499                 .tuner_addr     = ADDR_UNSET,
2500                 .radio_addr     = ADDR_UNSET,
2501                 .no_msp34xx     = 1,
2502                 .no_tda9875     = 1,
2503         },
2504         [BTTV_BOARD_AVDVBT_771] = {
2505                 /* Wolfram Joost <wojo@frokaschwei.de> */
2506                 .name           = "AVerMedia AVerTV DVB-T 771",
2507                 .video_inputs   = 2,
2508                 .svhs           = 1,
2509                 .tuner          = UNSET,
2510                 .tuner_type     = TUNER_ABSENT,
2511                 .tuner_addr     = ADDR_UNSET,
2512                 .radio_addr     = ADDR_UNSET,
2513                 .muxsel         = { 3 , 3 },
2514                 .no_msp34xx     = 1,
2515                 .no_tda9875     = 1,
2516                 .no_tda7432     = 1,
2517                 .pll            = PLL_28,
2518                 .has_dvb        = 1,
2519                 .no_gpioirq     = 1,
2520                 .has_remote     = 1,
2521         },
2522                 /* ---- card 0x7c ---------------------------------- */
2523         [BTTV_BOARD_AVDVBT_761] = {
2524                 /* Matt Jesson <dvb@jesson.eclipse.co.uk> */
2525                 /* Based on the Nebula card data - added remote and new card number - BTTV_BOARD_AVDVBT_761, see also ir-kbd-gpio.c */
2526                 .name           = "AverMedia AverTV DVB-T 761",
2527                 .video_inputs   = 2,
2528                 .tuner          = UNSET,
2529                 .svhs           = 1,
2530                 .muxsel         = { 3, 1, 2, 0 }, /* Comp0, S-Video, ?, ? */
2531                 .no_msp34xx     = 1,
2532                 .no_tda9875     = 1,
2533                 .no_tda7432     = 1,
2534                 .pll            = PLL_28,
2535                 .tuner_type     = UNSET,
2536                 .tuner_addr     = ADDR_UNSET,
2537                 .radio_addr     = ADDR_UNSET,
2538                 .has_dvb        = 1,
2539                 .no_gpioirq     = 1,
2540                 .has_remote     = 1,
2541         },
2542         [BTTV_BOARD_MATRIX_VISIONSQ] = {
2543                 /* andre.schwarz@matrix-vision.de */
2544                 .name             = "MATRIX Vision Sigma-SQ",
2545                 .video_inputs     = 16,
2546                 .audio_inputs     = 0,
2547                 .tuner            = UNSET,
2548                 .svhs             = UNSET,
2549                 .gpiomask         = 0x0,
2550                 .muxsel           = { 2, 2, 2, 2, 2, 2, 2, 2,
2551                                 3, 3, 3, 3, 3, 3, 3, 3 },
2552                 .muxsel_hook      = sigmaSQ_muxsel,
2553                 .gpiomux          = { 0 },
2554                 .no_msp34xx       = 1,
2555                 .pll              = PLL_28,
2556                 .tuner_type       = UNSET,
2557                 .tuner_addr       = ADDR_UNSET,
2558                 .radio_addr     = ADDR_UNSET,
2559         },
2560         [BTTV_BOARD_MATRIX_VISIONSLC] = {
2561                 /* andre.schwarz@matrix-vision.de */
2562                 .name             = "MATRIX Vision Sigma-SLC",
2563                 .video_inputs     = 4,
2564                 .audio_inputs     = 0,
2565                 .tuner            = UNSET,
2566                 .svhs             = UNSET,
2567                 .gpiomask         = 0x0,
2568                 .muxsel           = { 2, 2, 2, 2 },
2569                 .muxsel_hook      = sigmaSLC_muxsel,
2570                 .gpiomux          = { 0 },
2571                 .no_msp34xx       = 1,
2572                 .pll              = PLL_28,
2573                 .tuner_type       = UNSET,
2574                 .tuner_addr       = ADDR_UNSET,
2575                 .radio_addr     = ADDR_UNSET,
2576         },
2577                 /* BTTV_BOARD_APAC_VIEWCOMP */
2578         [BTTV_BOARD_APAC_VIEWCOMP] = {
2579                 /* Attila Kondoros <attila.kondoros@chello.hu> */
2580                 /* bt878 TV + FM 0x00000000 subsystem ID */
2581                 .name           = "APAC Viewcomp 878(AMAX)",
2582                 .video_inputs   = 2,
2583                 .audio_inputs   = 1,
2584                 .tuner          = 0,
2585                 .svhs           = UNSET,
2586                 .gpiomask       = 0xFF,
2587                 .muxsel         = { 2, 3, 1, 1 },
2588                 .gpiomux        = { 2, 0, 0, 0 },
2589                 .gpiomute       = 10,
2590                 .needs_tvaudio  = 0,
2591                 .pll            = PLL_28,
2592                 .tuner_type     = TUNER_PHILIPS_PAL,
2593                 .tuner_addr     = ADDR_UNSET,
2594                 .radio_addr     = ADDR_UNSET,
2595                 .has_remote     = 1,   /* miniremote works, see ir-kbd-gpio.c */
2596                 .has_radio      = 1,   /* not every card has radio */
2597         },
2598
2599                 /* ---- card 0x80 ---------------------------------- */
2600         [BTTV_BOARD_DVICO_DVBT_LITE] = {
2601                 /* Chris Pascoe <c.pascoe@itee.uq.edu.au> */
2602                 .name           = "DViCO FusionHDTV DVB-T Lite",
2603                 .tuner          = UNSET,
2604                 .no_msp34xx     = 1,
2605                 .no_tda9875     = 1,
2606                 .no_tda7432     = 1,
2607                 .pll            = PLL_28,
2608                 .no_video       = 1,
2609                 .has_dvb        = 1,
2610                 .tuner_type     = UNSET,
2611                 .tuner_addr     = ADDR_UNSET,
2612                 .radio_addr     = ADDR_UNSET,
2613         },
2614         [BTTV_BOARD_VGEAR_MYVCD] = {
2615                 /* Steven <photon38@pchome.com.tw> */
2616                 .name           = "V-Gear MyVCD",
2617                 .video_inputs   = 3,
2618                 .audio_inputs   = 1,
2619                 .tuner          = 0,
2620                 .svhs           = 2,
2621                 .gpiomask       = 0x3f,
2622                 .muxsel         = {2, 3, 1, 0 },
2623                 .gpiomux        = {0x31, 0x31, 0x31, 0x31 },
2624                 .gpiomute       = 0x31,
2625                 .no_msp34xx     = 1,
2626                 .pll            = PLL_28,
2627                 .tuner_type     = TUNER_PHILIPS_NTSC_M,
2628                 .tuner_addr     = ADDR_UNSET,
2629                 .radio_addr     = ADDR_UNSET,
2630                 .has_radio      = 0,
2631         },
2632         [BTTV_BOARD_SUPER_TV] = {
2633                 /* Rick C <cryptdragoon@gmail.com> */
2634                 .name           = "Super TV Tuner",
2635                 .video_inputs   = 4,
2636                 .audio_inputs   = 1,
2637                 .tuner          = 0,
2638                 .svhs           = 2,
2639                 .muxsel         = { 2, 3, 1, 0 },
2640                 .tuner_type     = TUNER_PHILIPS_NTSC,
2641                 .tuner_addr     = ADDR_UNSET,
2642                 .radio_addr     = ADDR_UNSET,
2643                 .gpiomask       = 0x008007,
2644                 .gpiomux        = { 0, 0x000001,0,0 },
2645                 .needs_tvaudio  = 1,
2646                 .has_radio      = 1,
2647         },
2648         [BTTV_BOARD_TIBET_CS16] = {
2649                 /* Chris Fanning <video4linux@haydon.net> */
2650                 .name           = "Tibet Systems 'Progress DVR' CS16",
2651                 .video_inputs   = 16,
2652                 .audio_inputs   = 0,
2653                 .tuner          = UNSET,
2654                 .svhs           = UNSET,
2655                 .muxsel         = { 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2 },
2656                 .pll            = PLL_28,
2657                 .no_msp34xx     = 1,
2658                 .no_tda9875     = 1,
2659                 .no_tda7432     = 1,
2660                 .tuner_type     = UNSET,
2661                 .tuner_addr     = ADDR_UNSET,
2662                 .radio_addr     = ADDR_UNSET,
2663                 .muxsel_hook    = tibetCS16_muxsel,
2664         },
2665         [BTTV_BOARD_KODICOM_4400R] = {
2666                 /* Bill Brack <wbrack@mmm.com.hk> */
2667                 /*
2668                 * Note that, because of the card's wiring, the "master"
2669                 * BT878A chip (i.e. the one which controls the analog switch
2670                 * and must use this card type) is the 2nd one detected.  The
2671                 * other 3 chips should use card type 0x85, whose description
2672                 * follows this one.  There is a EEPROM on the card (which is
2673                 * connected to the I2C of one of those other chips), but is
2674                 * not currently handled.  There is also a facility for a
2675                 * "monitor", which is also not currently implemented.
2676                 */
2677                 .name           = "Kodicom 4400R (master)",
2678                 .video_inputs   = 16,
2679                 .audio_inputs   = 0,
2680                 .tuner          = UNSET,
2681                 .tuner_type     = UNSET,
2682                 .tuner_addr     = ADDR_UNSET,
2683                 .radio_addr     = ADDR_UNSET,
2684                 .svhs           = UNSET,
2685                 /* GPIO bits 0-9 used for analog switch:
2686                 *   00 - 03:    camera selector
2687                 *   04 - 06:    channel (controller) selector
2688                 *   07: data (1->on, 0->off)
2689                 *   08: strobe
2690                 *   09: reset
2691                 * bit 16 is input from sync separator for the channel
2692                 */
2693                 .gpiomask       = 0x0003ff,
2694                 .no_gpioirq     = 1,
2695                 .muxsel         = { 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3 },
2696                 .pll            = PLL_28,
2697                 .no_msp34xx     = 1,
2698                 .no_tda7432     = 1,
2699                 .no_tda9875     = 1,
2700                 .muxsel_hook    = kodicom4400r_muxsel,
2701         },
2702         [BTTV_BOARD_KODICOM_4400R_SL] = {
2703                 /* Bill Brack <wbrack@mmm.com.hk> */
2704                 /* Note that, for reasons unknown, the "master" BT878A chip (i.e. the
2705                 * one which controls the analog switch, and must use the card type)
2706                 * is the 2nd one detected.  The other 3 chips should use this card
2707                 * type
2708                 */
2709                 .name           = "Kodicom 4400R (slave)",
2710                 .video_inputs   = 16,
2711                 .audio_inputs   = 0,
2712                 .tuner          = UNSET,
2713                 .tuner_type     = UNSET,
2714                 .tuner_addr     = ADDR_UNSET,
2715                 .radio_addr     = ADDR_UNSET,
2716                 .svhs           = UNSET,
2717                 .gpiomask       = 0x010000,
2718                 .no_gpioirq     = 1,
2719                 .muxsel         = { 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3 },
2720                 .pll            = PLL_28,
2721                 .no_msp34xx     = 1,
2722                 .no_tda7432     = 1,
2723                 .no_tda9875     = 1,
2724                 .muxsel_hook    = kodicom4400r_muxsel,
2725         },
2726                 /* ---- card 0x86---------------------------------- */
2727         [BTTV_BOARD_ADLINK_RTV24] = {
2728                 /* Michael Henson <mhenson@clarityvi.com> */
2729                 /* Adlink RTV24 with special unlock codes */
2730                 .name           = "Adlink RTV24",
2731                 .video_inputs   = 4,
2732                 .audio_inputs   = 1,
2733                 .tuner          = 0,
2734                 .svhs           = 2,
2735                 .muxsel         = { 2, 3, 1, 0 },
2736                 .tuner_type     = UNSET,
2737                 .tuner_addr     = ADDR_UNSET,
2738                 .radio_addr     = ADDR_UNSET,
2739                 .pll            = PLL_28,
2740         },
2741                 /* ---- card 0x87---------------------------------- */
2742         [BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE] = {
2743                 /* Michael Krufky <mkrufky@m1k.net> */
2744                 .name           = "DViCO FusionHDTV 5 Lite",
2745                 .tuner          = 0,
2746                 .tuner_type     = TUNER_LG_TDVS_H06XF, /* TDVS-H064F */
2747                 .tuner_addr     = ADDR_UNSET,
2748                 .radio_addr     = ADDR_UNSET,
2749                 .video_inputs   = 3,
2750                 .audio_inputs   = 1,
2751                 .svhs           = 2,
2752                 .muxsel         = { 2, 3, 1 },
2753                 .gpiomask       = 0x00e00007,
2754                 .gpiomux        = { 0x00400005, 0, 0x00000001, 0 },
2755                 .gpiomute       = 0x00c00007,
2756                 .no_msp34xx     = 1,
2757                 .no_tda9875     = 1,
2758                 .no_tda7432     = 1,
2759                 .has_dvb        = 1,
2760         },
2761                 /* ---- card 0x88---------------------------------- */
2762         [BTTV_BOARD_ACORP_Y878F] = {
2763                 /* Mauro Carvalho Chehab <mchehab@infradead.org> */
2764                 .name           = "Acorp Y878F",
2765                 .video_inputs   = 3,
2766                 .audio_inputs   = 1,
2767                 .tuner          = 0,
2768                 .svhs           = 2,
2769                 .gpiomask       = 0x01fe00,
2770                 .muxsel         = { 2, 3, 1, 1 },
2771                 .gpiomux        = { 0x001e00, 0, 0x018000, 0x014000 },
2772                 .gpiomute       = 0x002000,
2773                 .needs_tvaudio  = 1,
2774                 .pll            = PLL_28,
2775                 .tuner_type     = TUNER_YMEC_TVF66T5_B_DFF,
2776                 .tuner_addr     = 0xc1 >>1,
2777                 .radio_addr     = 0xc1 >>1,
2778                 .has_radio      = 1,
2779         },
2780                 /* ---- card 0x89 ---------------------------------- */
2781         [BTTV_BOARD_CONCEPTRONIC_CTVFMI2] = {
2782                 .name           = "Conceptronic CTVFMi v2",
2783                 .video_inputs   = 3,
2784                 .audio_inputs   = 1,
2785                 .tuner          = 0,
2786                 .svhs           = 2,
2787                 .gpiomask       = 0x001c0007,
2788                 .muxsel         = { 2, 3, 1, 1 },
2789                 .gpiomux        = { 0, 1, 2, 2 },
2790                 .gpiomute       = 3,
2791                 .needs_tvaudio  = 0,
2792                 .pll            = PLL_28,
2793                 .tuner_type     = TUNER_TENA_9533_DI,
2794                 .tuner_addr     = ADDR_UNSET,
2795                 .radio_addr     = ADDR_UNSET,
2796                 .has_remote     = 1,
2797                 .has_radio      = 1,
2798         },
2799                 /* ---- card 0x8a ---------------------------------- */
2800         [BTTV_BOARD_PV_BT878P_2E] = {
2801                 .name          = "Prolink Pixelview PV-BT878P+ (Rev.2E)",
2802                 .video_inputs  = 5,
2803                 .audio_inputs  = 1,
2804                 .tuner         = 0,
2805                 .svhs          = 3,
2806                 .gpiomask      = 0x01fe00,
2807                 .muxsel        = { 2,3,1,1,-1 },
2808                 .digital_mode  = DIGITAL_MODE_CAMERA,
2809                 .gpiomux       = { 0x00400, 0x10400, 0x04400, 0x80000 },
2810                 .gpiomute      = 0x12400,
2811                 .no_msp34xx    = 1,
2812                 .pll           = PLL_28,
2813                 .tuner_type    = TUNER_LG_PAL_FM,
2814                 .tuner_addr     = ADDR_UNSET,
2815                 .radio_addr     = ADDR_UNSET,
2816                 .has_remote    = 1,
2817         },
2818                 /* ---- card 0x8b ---------------------------------- */
2819         [BTTV_BOARD_PV_M4900] = {
2820                 /* Sérgio Fortier <sergiofortier@yahoo.com.br> */
2821                 .name           = "Prolink PixelView PlayTV MPEG2 PV-M4900",
2822                 .video_inputs   = 3,
2823                 .audio_inputs   = 1,
2824                 .tuner          = 0,
2825                 .svhs           = 2,
2826                 .gpiomask       = 0x3f,
2827                 .muxsel         = { 2, 3, 1, 1 },
2828                 .gpiomux        = { 0x21, 0x20, 0x24, 0x2c },
2829                 .gpiomute       = 0x29,
2830                 .no_msp34xx     = 1,
2831                 .pll            = PLL_28,
2832                 .tuner_type     = TUNER_YMEC_TVF_5533MF,
2833                 .tuner_addr     = ADDR_UNSET,
2834                 .radio_addr     = ADDR_UNSET,
2835                 .has_radio      = 1,
2836                 .has_remote     = 1,
2837         },
2838                 /* ---- card 0x8c ---------------------------------- */
2839         /* Has four Bt878 chips behind a PCI bridge, each chip has:
2840              one external BNC composite input (mux 2)
2841              three internal composite inputs (unknown muxes)
2842              an 18-bit stereo A/D (CS5331A), which has:
2843                one external stereo unblanced (RCA) audio connection
2844                one (or 3?) internal stereo balanced (XLR) audio connection
2845                input is selected via gpio to a 14052B mux
2846                  (mask=0x300, unbal=0x000, bal=0x100, ??=0x200,0x300)
2847                gain is controlled via an X9221A chip on the I2C bus @0x28
2848                sample rate is controlled via gpio to an MK1413S
2849                  (mask=0x3, 32kHz=0x0, 44.1kHz=0x1, 48kHz=0x2, ??=0x3)
2850              There is neither a tuner nor an svideo input. */
2851         [BTTV_BOARD_OSPREY440]  = {
2852                 .name           = "Osprey 440",
2853                 .video_inputs   = 4,
2854                 .audio_inputs   = 2, /* this is meaningless */
2855                 .tuner          = UNSET,
2856                 .svhs           = UNSET,
2857                 .muxsel         = { 2, 3, 0, 1 }, /* 3,0,1 are guesses */
2858                 .gpiomask       = 0x303,
2859                 .gpiomute       = 0x000, /* int + 32kHz */
2860                 .gpiomux        = { 0, 0, 0x000, 0x100},
2861                 .pll            = PLL_28,
2862                 .tuner_type     = UNSET,
2863                 .tuner_addr     = ADDR_UNSET,
2864                 .radio_addr     = ADDR_UNSET,
2865                 .no_msp34xx     = 1,
2866                 .no_tda9875     = 1,
2867                 .no_tda7432     = 1,
2868         },
2869                 /* ---- card 0x8d ---------------------------------- */
2870         [BTTV_BOARD_ASOUND_SKYEYE] = {
2871                 .name           = "Asound Skyeye PCTV",
2872                 .video_inputs   = 3,
2873                 .audio_inputs   = 1,
2874                 .tuner          = 0,
2875                 .svhs           = 2,
2876                 .gpiomask       = 15,
2877                 .muxsel         = { 2, 3, 1, 1 },
2878                 .gpiomux        = { 2, 0, 0, 0 },
2879                 .gpiomute       = 1,
2880                 .needs_tvaudio  = 1,
2881                 .pll            = PLL_28,
2882                 .tuner_type     = TUNER_PHILIPS_NTSC,
2883                 .tuner_addr     = ADDR_UNSET,
2884                 .radio_addr     = ADDR_UNSET,
2885         },
2886                 /* ---- card 0x8e ---------------------------------- */
2887         [BTTV_BOARD_SABRENT_TVFM] = {
2888                 .name           = "Sabrent TV-FM (bttv version)",
2889                 .video_inputs   = 3,
2890                 .audio_inputs   = 1,
2891                 .tuner          = 0,
2892                 .svhs           = 2,
2893                 .gpiomask       = 0x108007,
2894                 .muxsel         = { 2, 3, 1, 1 },
2895                 .gpiomux        = { 100000, 100002, 100002, 100000 },
2896                 .no_msp34xx     = 1,
2897                 .no_tda9875     = 1,
2898                 .no_tda7432     = 1,
2899                 .pll            = PLL_28,
2900                 .tuner_type     = TUNER_TNF_5335MF,
2901                 .tuner_addr     = ADDR_UNSET,
2902                 .has_radio      = 1,
2903         },
2904         /* ---- card 0x8f ---------------------------------- */
2905         [BTTV_BOARD_HAUPPAUGE_IMPACTVCB] = {
2906                 .name           = "Hauppauge ImpactVCB (bt878)",
2907                 .video_inputs   = 4,
2908                 .audio_inputs   = 0,
2909                 .tuner          = UNSET,
2910                 .svhs           = UNSET,
2911                 .gpiomask       = 0x0f, /* old: 7 */
2912                 .muxsel         = { 0, 1, 3, 2 }, /* Composite 0-3 */
2913                 .no_msp34xx     = 1,
2914                 .no_tda9875     = 1,
2915                 .no_tda7432     = 1,
2916                 .tuner_type     = UNSET,
2917                 .tuner_addr     = ADDR_UNSET,
2918                 .radio_addr     = ADDR_UNSET,
2919         },
2920         [BTTV_BOARD_MACHTV_MAGICTV] = {
2921                 /* Julian Calaby <julian.calaby@gmail.com>
2922                  * Slightly different from original MachTV definition (0x60)
2923
2924                  * FIXME: RegSpy says gpiomask should be "0x001c800f", but it
2925                  * stuffs up remote chip. Bug is a pin on the jaecs is not set
2926                  * properly (methinks) causing no keyup bits being set */
2927
2928                 .name           = "MagicTV", /* rebranded MachTV */
2929                 .video_inputs   = 3,
2930                 .audio_inputs   = 1,
2931                 .tuner          = 0,
2932                 .svhs           = 2,
2933                 .gpiomask       = 7,
2934                 .muxsel         = { 2, 3, 1, 1 },
2935                 .gpiomux        = { 0, 1, 2, 3 },
2936                 .gpiomute       = 4,
2937                 .tuner_type     = TUNER_TEMIC_4009FR5_PAL,
2938                 .tuner_addr     = ADDR_UNSET,
2939                 .radio_addr     = ADDR_UNSET,
2940                 .pll            = PLL_28,
2941                 .has_radio      = 1,
2942                 .has_remote     = 1,
2943         },
2944         [BTTV_BOARD_SSAI_SECURITY] = {
2945                 .name           = "SSAI Security Video Interface",
2946                 .video_inputs   = 4,
2947                 .audio_inputs   = 0,
2948                 .tuner          = UNSET,
2949                 .svhs           = UNSET,
2950                 .muxsel         = { 0, 1, 2, 3 },
2951                 .tuner_type     = UNSET,
2952                 .tuner_addr     = ADDR_UNSET,
2953                 .radio_addr     = ADDR_UNSET,
2954         },
2955         [BTTV_BOARD_SSAI_ULTRASOUND] = {
2956                 .name           = "SSAI Ultrasound Video Interface",
2957                 .video_inputs   = 2,
2958                 .audio_inputs   = 0,
2959                 .tuner          = UNSET,
2960                 .svhs           = 1,
2961                 .muxsel         = { 2, 0, 1, 3 },
2962                 .tuner_type     = UNSET,
2963                 .tuner_addr     = ADDR_UNSET,
2964                 .radio_addr     = ADDR_UNSET,
2965         },
2966         /* ---- card 0x94---------------------------------- */
2967         [BTTV_BOARD_DVICO_FUSIONHDTV_2] = {
2968                 .name           = "DViCO FusionHDTV 2",
2969                 .tuner          = 0,
2970                 .tuner_type     = TUNER_PHILIPS_FCV1236D,
2971                 .tuner_addr     = ADDR_UNSET,
2972                 .radio_addr     = ADDR_UNSET,
2973                 .video_inputs   = 3,
2974                 .audio_inputs   = 1,
2975                 .svhs           = 2,
2976                 .muxsel         = { 2, 3, 1 },
2977                 .gpiomask       = 0x00e00007,
2978                 .gpiomux        = { 0x00400005, 0, 0x00000001, 0 },
2979                 .gpiomute       = 0x00c00007,
2980                 .no_msp34xx     = 1,
2981                 .no_tda9875     = 1,
2982                 .no_tda7432     = 1,
2983         },
2984         /* ---- card 0x95---------------------------------- */
2985         [BTTV_BOARD_TYPHOON_TVTUNERPCI] = {
2986                 .name           = "Typhoon TV-Tuner PCI (50684)",
2987                 .video_inputs   = 3,
2988                 .audio_inputs   = 1,
2989                 .tuner          = 0,
2990                 .svhs           = 2,
2991                 .gpiomask       = 0x3014f,
2992                 .muxsel         = { 2, 3, 1, 1 },
2993                 .gpiomux        = { 0x20001,0x10001, 0, 0 },
2994                 .gpiomute       = 10,
2995                 .needs_tvaudio  = 1,
2996                 .pll            = PLL_28,
2997                 .tuner_type     = TUNER_PHILIPS_PAL_I,
2998                 .tuner_addr     = ADDR_UNSET,
2999                 .radio_addr     = ADDR_UNSET,
3000         },
3001         [BTTV_BOARD_GEOVISION_GV600] = {
3002                 /* emhn@usb.ve */
3003                 .name             = "Geovision GV-600",
3004                 .video_inputs     = 16,
3005                 .audio_inputs     = 0,
3006                 .tuner            = UNSET,
3007                 .svhs             = UNSET,
3008                 .gpiomask         = 0x0,
3009                 .muxsel           = { 2, 2, 2, 2, 2, 2, 2, 2,
3010                                       2, 2, 2, 2, 2, 2, 2, 2 },
3011                 .muxsel_hook      = geovision_muxsel,
3012                 .gpiomux          = { 0 },
3013                 .no_msp34xx       = 1,
3014                 .pll              = PLL_28,
3015                 .tuner_type       = UNSET,
3016                 .tuner_addr       = ADDR_UNSET,
3017                 .radio_addr       = ADDR_UNSET,
3018         },
3019         [BTTV_BOARD_KOZUMI_KTV_01C] = {
3020                 /* Mauro Lacy <mauro@lacy.com.ar>
3021                  * Based on MagicTV and Conceptronic CONTVFMi */
3022
3023                 .name           = "Kozumi KTV-01C",
3024                 .video_inputs   = 3,
3025                 .audio_inputs   = 1,
3026                 .tuner          = 0,
3027                 .svhs           = 2,
3028                 .gpiomask       = 0x008007,
3029                 .muxsel         = { 2, 3, 1, 1 },
3030                 .gpiomux        = { 0, 1, 2, 2 }, /* CONTVFMi */
3031                 .gpiomute       = 3, /* CONTVFMi */
3032                 .needs_tvaudio  = 0,
3033                 .tuner_type     = TUNER_PHILIPS_FM1216ME_MK3, /* TCL MK3 */
3034                 .tuner_addr     = ADDR_UNSET,
3035                 .radio_addr     = ADDR_UNSET,
3036                 .pll            = PLL_28,
3037                 .has_radio      = 1,
3038                 .has_remote     = 1,
3039         },
3040 };
3041
3042 static const unsigned int bttv_num_tvcards = ARRAY_SIZE(bttv_tvcards);
3043
3044 /* ----------------------------------------------------------------------- */
3045
3046 static unsigned char eeprom_data[256];
3047
3048 /*
3049  * identify card
3050  */
3051 void __devinit bttv_idcard(struct bttv *btv)
3052 {
3053         unsigned int gpiobits;
3054         int i,type;
3055         unsigned short tmp;
3056
3057         /* read PCI subsystem ID */
3058         pci_read_config_word(btv->c.pci, PCI_SUBSYSTEM_ID, &tmp);
3059         btv->cardid = tmp << 16;
3060         pci_read_config_word(btv->c.pci, PCI_SUBSYSTEM_VENDOR_ID, &tmp);
3061         btv->cardid |= tmp;
3062
3063         if (0 != btv->cardid && 0xffffffff != btv->cardid) {
3064                 /* look for the card */
3065                 for (type = -1, i = 0; cards[i].id != 0; i++)
3066                         if (cards[i].id  == btv->cardid)
3067                                 type = i;
3068
3069                 if (type != -1) {
3070                         /* found it */
3071                         printk(KERN_INFO "bttv%d: detected: %s [card=%d], "
3072                                "PCI subsystem ID is %04x:%04x\n",
3073                                btv->c.nr,cards[type].name,cards[type].cardnr,
3074                                btv->cardid & 0xffff,
3075                                (btv->cardid >> 16) & 0xffff);
3076                         btv->c.type = cards[type].cardnr;
3077                 } else {
3078                         /* 404 */
3079                         printk(KERN_INFO "bttv%d: subsystem: %04x:%04x (UNKNOWN)\n",
3080                                btv->c.nr, btv->cardid & 0xffff,
3081                                (btv->cardid >> 16) & 0xffff);
3082                         printk(KERN_DEBUG "please mail id, board name and "
3083                                "the correct card= insmod option to video4linux-list@redhat.com\n");
3084                 }
3085         }
3086
3087         /* let the user override the autodetected type */
3088         if (card[btv->c.nr] < bttv_num_tvcards)
3089                 btv->c.type=card[btv->c.nr];
3090
3091         /* print which card config we are using */
3092         printk(KERN_INFO "bttv%d: using: %s [card=%d,%s]\n",btv->c.nr,
3093                bttv_tvcards[btv->c.type].name, btv->c.type,
3094                card[btv->c.nr] < bttv_num_tvcards
3095                ? "insmod option" : "autodetected");
3096
3097         /* overwrite gpio stuff ?? */
3098         if (UNSET == audioall && UNSET == audiomux[0])
3099                 return;
3100
3101         if (UNSET != audiomux[0]) {
3102                 gpiobits = 0;
3103                 for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) {
3104                         bttv_tvcards[btv->c.type].gpiomux[i] = audiomux[i];
3105                         gpiobits |= audiomux[i];
3106                 }
3107         } else {
3108                 gpiobits = audioall;
3109                 for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) {
3110                         bttv_tvcards[btv->c.type].gpiomux[i] = audioall;
3111                 }
3112         }
3113         bttv_tvcards[btv->c.type].gpiomask = (UNSET != gpiomask) ? gpiomask : gpiobits;
3114         printk(KERN_INFO "bttv%d: gpio config override: mask=0x%x, mux=",
3115                btv->c.nr,bttv_tvcards[btv->c.type].gpiomask);
3116         for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) {
3117                 printk("%s0x%x", i ? "," : "", bttv_tvcards[btv->c.type].gpiomux[i]);
3118         }
3119         printk("\n");
3120 }
3121
3122 /*
3123  * (most) board specific initialisations goes here
3124  */
3125
3126 /* Some Modular Technology cards have an eeprom, but no subsystem ID */
3127 static void identify_by_eeprom(struct bttv *btv, unsigned char eeprom_data[256])
3128 {
3129         int type = -1;
3130
3131         if (0 == strncmp(eeprom_data,"GET MM20xPCTV",13))
3132                 type = BTTV_BOARD_MODTEC_205;
3133         else if (0 == strncmp(eeprom_data+20,"Picolo",7))
3134                 type = BTTV_BOARD_EURESYS_PICOLO;
3135         else if (eeprom_data[0] == 0x84 && eeprom_data[2]== 0)
3136                 type = BTTV_BOARD_HAUPPAUGE; /* old bt848 */
3137
3138         if (-1 != type) {
3139                 btv->c.type = type;
3140                 printk("bttv%d: detected by eeprom: %s [card=%d]\n",
3141                        btv->c.nr, bttv_tvcards[btv->c.type].name, btv->c.type);
3142         }
3143 }
3144
3145 static void flyvideo_gpio(struct bttv *btv)
3146 {
3147         int gpio, has_remote, has_radio, is_capture_only;
3148         int is_lr90, has_tda9820_tda9821;
3149         int tuner_type = UNSET, ttype;
3150
3151         gpio_inout(0xffffff, 0);
3152         udelay(8);  /* without this we would see the 0x1800 mask */
3153         gpio = gpio_read();
3154         /* FIXME: must restore OUR_EN ??? */
3155
3156         /* all cards provide GPIO info, some have an additional eeprom
3157          * LR50: GPIO coding can be found lower right CP1 .. CP9
3158          *       CP9=GPIO23 .. CP1=GPIO15; when OPEN, the corresponding GPIO reads 1.
3159          *       GPIO14-12: n.c.
3160          * LR90: GP9=GPIO23 .. GP1=GPIO15 (right above the bt878)
3161
3162          * lowest 3 bytes are remote control codes (no handshake needed)
3163          * xxxFFF: No remote control chip soldered
3164          * xxxF00(LR26/LR50), xxxFE0(LR90): Remote control chip (LVA001 or CF45) soldered
3165          * Note: Some bits are Audio_Mask !
3166          */
3167         ttype = (gpio & 0x0f0000) >> 16;
3168         switch (ttype) {
3169         case 0x0:
3170                 tuner_type = 2;  /* NTSC, e.g. TPI8NSR11P */
3171                 break;
3172         case 0x2:
3173                 tuner_type = 39; /* LG NTSC (newer TAPC series) TAPC-H701P */
3174                 break;
3175         case 0x4:
3176                 tuner_type = 5;  /* Philips PAL TPI8PSB02P, TPI8PSB12P, TPI8PSB12D or FI1216, FM1216 */
3177                 break;
3178         case 0x6:
3179                 tuner_type = 37; /* LG PAL (newer TAPC series) TAPC-G702P */
3180                 break;
3181         case 0xC:
3182                 tuner_type = 3;  /* Philips SECAM(+PAL) FQ1216ME or FI1216MF */
3183                 break;
3184         default:
3185                 printk(KERN_INFO "bttv%d: FlyVideo_gpio: unknown tuner type.\n", btv->c.nr);
3186                 break;
3187         }
3188
3189         has_remote          =   gpio & 0x800000;
3190         has_radio           =   gpio & 0x400000;
3191         /*   unknown                   0x200000;
3192          *   unknown2                  0x100000; */
3193         is_capture_only     = !(gpio & 0x008000); /* GPIO15 */
3194         has_tda9820_tda9821 = !(gpio & 0x004000);
3195         is_lr90             = !(gpio & 0x002000); /* else LR26/LR50 (LR38/LR51 f. capture only) */
3196         /*
3197          * gpio & 0x001000    output bit for audio routing */
3198
3199         if (is_capture_only)
3200                 tuner_type = TUNER_ABSENT; /* No tuner present */
3201
3202         printk(KERN_INFO "bttv%d: FlyVideo Radio=%s RemoteControl=%s Tuner=%d gpio=0x%06x\n",
3203                 btv->c.nr, has_radio ? "yes" : "no ",
3204                 has_remote ? "yes" : "no ", tuner_type, gpio);
3205         printk(KERN_INFO "bttv%d: FlyVideo  LR90=%s tda9821/tda9820=%s capture_only=%s\n",
3206                 btv->c.nr, is_lr90 ? "yes" : "no ",
3207                 has_tda9820_tda9821 ? "yes" : "no ",
3208                 is_capture_only ? "yes" : "no ");
3209
3210         if (tuner_type != UNSET) /* only set if known tuner autodetected, else let insmod option through */
3211                 btv->tuner_type = tuner_type;
3212         btv->has_radio = has_radio;
3213
3214         /* LR90 Audio Routing is done by 2 hef4052, so Audio_Mask has 4 bits: 0x001c80
3215          * LR26/LR50 only has 1 hef4052, Audio_Mask 0x000c00
3216          * Audio options: from tuner, from tda9821/tda9821(mono,stereo,sap), from tda9874, ext., mute */
3217         if (has_tda9820_tda9821)
3218                 btv->audio_mode_gpio = lt9415_audio;
3219         /* todo: if(has_tda9874) btv->audio_mode_gpio = fv2000s_audio; */
3220 }
3221
3222 static int miro_tunermap[] = { 0,6,2,3,   4,5,6,0,  3,0,4,5,  5,2,16,1,
3223                                14,2,17,1, 4,1,4,3,  1,2,16,1, 4,4,4,4 };
3224 static int miro_fmtuner[]  = { 0,0,0,0,   0,0,0,0,  0,0,0,0,  0,0,0,1,
3225                                1,1,1,1,   1,1,1,0,  0,0,0,0,  0,1,0,0 };
3226
3227 static void miro_pinnacle_gpio(struct bttv *btv)
3228 {
3229         int id,msp,gpio;
3230         char *info;
3231
3232         gpio_inout(0xffffff, 0);
3233         gpio = gpio_read();
3234         id   = ((gpio>>10) & 63) -1;
3235         msp  = bttv_I2CRead(btv, I2C_ADDR_MSP3400, "MSP34xx");
3236         if (id < 32) {
3237                 btv->tuner_type = miro_tunermap[id];
3238                 if (0 == (gpio & 0x20)) {
3239                         btv->has_radio = 1;
3240                         if (!miro_fmtuner[id]) {
3241                                 btv->has_matchbox = 1;
3242                                 btv->mbox_we    = (1<<6);
3243                                 btv->mbox_most  = (1<<7);
3244                                 btv->mbox_clk   = (1<<8);
3245                                 btv->mbox_data  = (1<<9);
3246                                 btv->mbox_mask  = (1<<6)|(1<<7)|(1<<8)|(1<<9);
3247                         }
3248                 } else {
3249                         btv->has_radio = 0;
3250                 }
3251                 if (-1 != msp) {
3252                         if (btv->c.type == BTTV_BOARD_MIRO)
3253                                 btv->c.type = BTTV_BOARD_MIROPRO;
3254                         if (btv->c.type == BTTV_BOARD_PINNACLE)
3255                                 btv->c.type = BTTV_BOARD_PINNACLEPRO;
3256                 }
3257                 printk(KERN_INFO
3258                        "bttv%d: miro: id=%d tuner=%d radio=%s stereo=%s\n",
3259                        btv->c.nr, id+1, btv->tuner_type,
3260                        !btv->has_radio ? "no" :
3261                        (btv->has_matchbox ? "matchbox" : "fmtuner"),
3262                        (-1 == msp) ? "no" : "yes");
3263         } else {
3264                 /* new cards with microtune tuner */
3265                 id = 63 - id;
3266                 btv->has_radio = 0;
3267                 switch (id) {
3268                 case 1:
3269                         info = "PAL / mono";
3270                         btv->tda9887_conf = TDA9887_INTERCARRIER;
3271                         break;
3272                 case 2:
3273                         info = "PAL+SECAM / stereo";
3274                         btv->has_radio = 1;
3275                         btv->tda9887_conf = TDA9887_QSS;
3276                         break;
3277                 case 3:
3278                         info = "NTSC / stereo";
3279                         btv->has_radio = 1;
3280                         btv->tda9887_conf = TDA9887_QSS;
3281                         break;
3282                 case 4:
3283                         info = "PAL+SECAM / mono";
3284                         btv->tda9887_conf = TDA9887_QSS;
3285                         break;
3286                 case 5:
3287                         info = "NTSC / mono";
3288                         btv->tda9887_conf = TDA9887_INTERCARRIER;
3289                         break;
3290                 case 6:
3291                         info = "NTSC / stereo";
3292                         btv->tda9887_conf = TDA9887_INTERCARRIER;
3293                         break;
3294                 case 7:
3295                         info = "PAL / stereo";
3296                         btv->tda9887_conf = TDA9887_INTERCARRIER;
3297                         break;
3298                 default:
3299                         info = "oops: unknown card";
3300                         break;
3301                 }
3302                 if (-1 != msp)
3303                         btv->c.type = BTTV_BOARD_PINNACLEPRO;
3304                 printk(KERN_INFO
3305                        "bttv%d: pinnacle/mt: id=%d info=\"%s\" radio=%s\n",
3306                        btv->c.nr, id, info, btv->has_radio ? "yes" : "no");
3307                 btv->tuner_type = TUNER_MT2032;
3308         }
3309 }
3310
3311 /* GPIO21   L: Buffer aktiv, H: Buffer inaktiv */
3312 #define LM1882_SYNC_DRIVE     0x200000L
3313
3314 static void init_ids_eagle(struct bttv *btv)
3315 {
3316         gpio_inout(0xffffff,0xFFFF37);
3317         gpio_write(0x200020);
3318
3319         /* flash strobe inverter ?! */
3320         gpio_write(0x200024);
3321
3322         /* switch sync drive off */
3323         gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE);
3324
3325         /* set BT848 muxel to 2 */
3326         btaor((2)<<5, ~(2<<5), BT848_IFORM);
3327 }
3328
3329 /* Muxsel helper for the IDS Eagle.
3330  * the eagles does not use the standard muxsel-bits but
3331  * has its own multiplexer */
3332 static void eagle_muxsel(struct bttv *btv, unsigned int input)
3333 {
3334         btaor((2)<<5, ~(3<<5), BT848_IFORM);
3335         gpio_bits(3,bttv_tvcards[btv->c.type].muxsel[input&7]);
3336
3337         /* composite */
3338         /* set chroma ADC to sleep */
3339         btor(BT848_ADC_C_SLEEP, BT848_ADC);
3340         /* set to composite video */
3341         btand(~BT848_CONTROL_COMP, BT848_E_CONTROL);
3342         btand(~BT848_CONTROL_COMP, BT848_O_CONTROL);
3343
3344         /* switch sync drive off */
3345         gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE);
3346 }
3347
3348 static void gvc1100_muxsel(struct bttv *btv, unsigned int input)
3349 {
3350         static const int masks[] = {0x30, 0x01, 0x12, 0x23};
3351         gpio_write(masks[input%4]);
3352 }
3353
3354 /* LMLBT4x initialization - to allow access to GPIO bits for sensors input and
3355    alarms output
3356
3357    GPIObit    | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
3358    assignment | TI | O3|INx| O2| O1|IN4|IN3|IN2|IN1|   |   |
3359
3360    IN - sensor inputs, INx - sensor inputs and TI XORed together
3361    O1,O2,O3 - alarm outputs (relays)
3362
3363    OUT ENABLE   1    1   0  . 1  1   0   0 . 0   0   0    0   = 0x6C0
3364
3365 */
3366
3367 static void init_lmlbt4x(struct bttv *btv)
3368 {
3369         printk(KERN_DEBUG "LMLBT4x init\n");
3370         btwrite(0x000000, BT848_GPIO_REG_INP);
3371         gpio_inout(0xffffff, 0x0006C0);
3372         gpio_write(0x000000);
3373 }
3374
3375 static void sigmaSQ_muxsel(struct bttv *btv, unsigned int input)
3376 {
3377         unsigned int inmux = input % 8;
3378         gpio_inout( 0xf, 0xf );
3379         gpio_bits( 0xf, inmux );
3380 }
3381
3382 static void sigmaSLC_muxsel(struct bttv *btv, unsigned int input)
3383 {
3384         unsigned int inmux = input % 4;
3385         gpio_inout( 3<<9, 3<<9 );
3386         gpio_bits( 3<<9, inmux<<9 );
3387 }
3388
3389 static void geovision_muxsel(struct bttv *btv, unsigned int input)
3390 {
3391         unsigned int inmux = input % 16;
3392         gpio_inout(0xf, 0xf);
3393         gpio_bits(0xf, inmux);
3394 }
3395
3396 /* ----------------------------------------------------------------------- */
3397
3398 static void bttv_reset_audio(struct bttv *btv)
3399 {
3400         /*
3401          * BT878A has a audio-reset register.
3402          * 1. This register is an audio reset function but it is in
3403          *    function-0 (video capture) address space.
3404          * 2. It is enough to do this once per power-up of the card.
3405          * 3. There is a typo in the Conexant doc -- it is not at
3406          *    0x5B, but at 0x058. (B is an odd-number, obviously a typo!).
3407          * --//Shrikumar 030609
3408          */
3409         if (btv->id != 878)
3410                 return;
3411
3412         if (bttv_debug)
3413                 printk("bttv%d: BT878A ARESET\n",btv->c.nr);
3414         btwrite((1<<7), 0x058);
3415         udelay(10);
3416         btwrite(     0, 0x058);
3417 }
3418
3419 /* initialization part one -- before registering i2c bus */
3420 void __devinit bttv_init_card1(struct bttv *btv)
3421 {
3422         switch (btv->c.type) {
3423         case BTTV_BOARD_HAUPPAUGE:
3424         case BTTV_BOARD_HAUPPAUGE878:
3425                 boot_msp34xx(btv,5);
3426                 break;
3427         case BTTV_BOARD_VOODOOTV_200:
3428         case BTTV_BOARD_VOODOOTV_FM:
3429                 boot_msp34xx(btv,20);
3430                 break;
3431         case BTTV_BOARD_AVERMEDIA98:
3432                 boot_msp34xx(btv,11);
3433                 break;
3434         case BTTV_BOARD_HAUPPAUGEPVR:
3435                 pvr_boot(btv);
3436                 break;
3437         case BTTV_BOARD_TWINHAN_DST:
3438         case BTTV_BOARD_AVDVBT_771:
3439         case BTTV_BOARD_PINNACLESAT:
3440                 btv->use_i2c_hw = 1;
3441                 break;
3442         case BTTV_BOARD_ADLINK_RTV24:
3443                 init_RTV24( btv );
3444                 break;
3445
3446         }
3447         if (!bttv_tvcards[btv->c.type].has_dvb)
3448                 bttv_reset_audio(btv);
3449 }
3450
3451 /* initialization part two -- after registering i2c bus */
3452 void __devinit bttv_init_card2(struct bttv *btv)
3453 {
3454         int addr=ADDR_UNSET;
3455
3456         btv->tuner_type = UNSET;
3457
3458         if (BTTV_BOARD_UNKNOWN == btv->c.type) {
3459                 bttv_readee(btv,eeprom_data,0xa0);
3460                 identify_by_eeprom(btv,eeprom_data);
3461         }
3462
3463         switch (btv->c.type) {
3464         case BTTV_BOARD_MIRO:
3465         case BTTV_BOARD_MIROPRO:
3466         case BTTV_BOARD_PINNACLE:
3467         case BTTV_BOARD_PINNACLEPRO:
3468                 /* miro/pinnacle */
3469                 miro_pinnacle_gpio(btv);
3470                 break;
3471         case BTTV_BOARD_FLYVIDEO_98:
3472         case BTTV_BOARD_MAXI:
3473         case BTTV_BOARD_LIFE_FLYKIT:
3474         case BTTV_BOARD_FLYVIDEO:
3475         case BTTV_BOARD_TYPHOON_TVIEW:
3476         case BTTV_BOARD_CHRONOS_VS2:
3477         case BTTV_BOARD_FLYVIDEO_98FM:
3478         case BTTV_BOARD_FLYVIDEO2000:
3479         case BTTV_BOARD_FLYVIDEO98EZ:
3480         case BTTV_BOARD_CONFERENCETV:
3481         case BTTV_BOARD_LIFETEC_9415:
3482                 flyvideo_gpio(btv);
3483                 break;
3484         case BTTV_BOARD_HAUPPAUGE:
3485         case BTTV_BOARD_HAUPPAUGE878:
3486         case BTTV_BOARD_HAUPPAUGEPVR:
3487                 /* pick up some config infos from the eeprom */
3488                 bttv_readee(btv,eeprom_data,0xa0);
3489                 hauppauge_eeprom(btv);
3490                 break;
3491         case BTTV_BOARD_AVERMEDIA98:
3492         case BTTV_BOARD_AVPHONE98:
3493                 bttv_readee(btv,eeprom_data,0xa0);
3494                 avermedia_eeprom(btv);
3495                 break;
3496         case BTTV_BOARD_PXC200:
3497                 init_PXC200(btv);
3498                 break;
3499         case BTTV_BOARD_PICOLO_TETRA_CHIP:
3500                 picolo_tetra_init(btv);
3501                 break;
3502         case BTTV_BOARD_VHX:
3503                 btv->has_radio    = 1;
3504                 btv->has_matchbox = 1;
3505                 btv->mbox_we      = 0x20;
3506                 btv->mbox_most    = 0;
3507                 btv->mbox_clk     = 0x08;
3508                 btv->mbox_data    = 0x10;
3509                 btv->mbox_mask    = 0x38;
3510                 break;
3511         case BTTV_BOARD_VOBIS_BOOSTAR:
3512         case BTTV_BOARD_TERRATV:
3513                 terratec_active_radio_upgrade(btv);
3514                 break;
3515         case BTTV_BOARD_MAGICTVIEW061:
3516                 if (btv->cardid == 0x3002144f) {
3517                         btv->has_radio=1;
3518                         printk("bttv%d: radio detected by subsystem id (CPH05x)\n",btv->c.nr);
3519                 }
3520                 break;
3521         case BTTV_BOARD_STB2:
3522                 if (btv->cardid == 0x3060121a) {
3523                         /* Fix up entry for 3DFX VoodooTV 100,
3524                            which is an OEM STB card variant. */
3525                         btv->has_radio=0;
3526                         btv->tuner_type=TUNER_TEMIC_NTSC;
3527                 }
3528                 break;
3529         case BTTV_BOARD_OSPREY1x0:
3530         case BTTV_BOARD_OSPREY1x0_848:
3531         case BTTV_BOARD_OSPREY101_848:
3532         case BTTV_BOARD_OSPREY1x1:
3533         case BTTV_BOARD_OSPREY1x1_SVID:
3534         case BTTV_BOARD_OSPREY2xx:
3535         case BTTV_BOARD_OSPREY2x0_SVID:
3536         case BTTV_BOARD_OSPREY2x0:
3537         case BTTV_BOARD_OSPREY440:
3538         case BTTV_BOARD_OSPREY500:
3539         case BTTV_BOARD_OSPREY540:
3540         case BTTV_BOARD_OSPREY2000:
3541                 bttv_readee(btv,eeprom_data,0xa0);
3542                 osprey_eeprom(btv, eeprom_data);
3543                 break;
3544         case BTTV_BOARD_IDS_EAGLE:
3545                 init_ids_eagle(btv);
3546                 break;
3547         case BTTV_BOARD_MODTEC_205:
3548                 bttv_readee(btv,eeprom_data,0xa0);
3549                 modtec_eeprom(btv);
3550                 break;
3551         case BTTV_BOARD_LMLBT4:
3552                 init_lmlbt4x(btv);
3553                 break;
3554         case BTTV_BOARD_TIBET_CS16:
3555                 tibetCS16_init(btv);
3556                 break;
3557         case BTTV_BOARD_KODICOM_4400R:
3558                 kodicom4400r_init(btv);
3559                 break;
3560         }
3561
3562         /* pll configuration */
3563         if (!(btv->id==848 && btv->revision==0x11)) {
3564                 /* defaults from card list */
3565                 if (PLL_28 == bttv_tvcards[btv->c.type].pll) {
3566                         btv->pll.pll_ifreq=28636363;
3567                         btv->pll.pll_crystal=BT848_IFORM_XT0;
3568                 }
3569                 if (PLL_35 == bttv_tvcards[btv->c.type].pll) {
3570                         btv->pll.pll_ifreq=35468950;
3571                         btv->pll.pll_crystal=BT848_IFORM_XT1;
3572                 }
3573                 /* insmod options can override */
3574                 switch (pll[btv->c.nr]) {
3575                 case 0: /* none */
3576                         btv->pll.pll_crystal = 0;
3577                         btv->pll.pll_ifreq   = 0;
3578                         btv->pll.pll_ofreq   = 0;
3579                         break;
3580                 case 1: /* 28 MHz */
3581                 case 28:
3582                         btv->pll.pll_ifreq   = 28636363;
3583                         btv->pll.pll_ofreq   = 0;
3584                         btv->pll.pll_crystal = BT848_IFORM_XT0;
3585                         break;
3586                 case 2: /* 35 MHz */
3587                 case 35:
3588                         btv->pll.pll_ifreq   = 35468950;
3589                         btv->pll.pll_ofreq   = 0;
3590                         btv->pll.pll_crystal = BT848_IFORM_XT1;
3591                         break;
3592                 }
3593         }
3594         btv->pll.pll_current = -1;
3595
3596         /* tuner configuration (from card list / autodetect / insmod option) */
3597         if (ADDR_UNSET != bttv_tvcards[btv->c.type].tuner_addr)
3598                 addr = bttv_tvcards[btv->c.type].tuner_addr;
3599
3600         if (UNSET != bttv_tvcards[btv->c.type].tuner_type)
3601                 if(UNSET == btv->tuner_type)
3602                         btv->tuner_type = bttv_tvcards[btv->c.type].tuner_type;
3603         if (UNSET != tuner[btv->c.nr])
3604                 btv->tuner_type = tuner[btv->c.nr];
3605
3606         if (btv->tuner_type == TUNER_ABSENT ||
3607             bttv_tvcards[btv->c.type].tuner == UNSET)
3608                 printk(KERN_INFO "bttv%d: tuner absent\n", btv->c.nr);
3609         else if(btv->tuner_type == UNSET)
3610                 printk(KERN_WARNING "bttv%d: tuner type unset\n", btv->c.nr);
3611         else
3612                 printk(KERN_INFO "bttv%d: tuner type=%d\n", btv->c.nr,
3613                        btv->tuner_type);
3614
3615         if (btv->tuner_type != UNSET) {
3616                 struct tuner_setup tun_setup;
3617
3618                 tun_setup.mode_mask = T_ANALOG_TV | T_DIGITAL_TV;
3619                 tun_setup.type = btv->tuner_type;
3620                 tun_setup.addr = addr;
3621
3622                 bttv_call_i2c_clients(btv, TUNER_SET_TYPE_ADDR, &tun_setup);
3623         }
3624
3625         if (btv->tda9887_conf) {
3626                 struct v4l2_priv_tun_config tda9887_cfg;
3627
3628                 tda9887_cfg.tuner = TUNER_TDA9887;
3629                 tda9887_cfg.priv = &btv->tda9887_conf;
3630
3631                 bttv_call_i2c_clients(btv, TUNER_SET_CONFIG, &tda9887_cfg);
3632         }
3633
3634         btv->svhs = bttv_tvcards[btv->c.type].svhs;
3635         if (svhs[btv->c.nr] != UNSET)
3636                 btv->svhs = svhs[btv->c.nr];
3637         if (remote[btv->c.nr] != UNSET)
3638                 btv->has_remote = remote[btv->c.nr];
3639
3640         if (bttv_tvcards[btv->c.type].has_radio)
3641                 btv->has_radio=1;
3642         if (bttv_tvcards[btv->c.type].has_remote)
3643                 btv->has_remote=1;
3644         if (!bttv_tvcards[btv->c.type].no_gpioirq)
3645                 btv->gpioirq=1;
3646         if (bttv_tvcards[btv->c.type].volume_gpio)
3647                 btv->volume_gpio=bttv_tvcards[btv->c.type].volume_gpio;
3648         if (bttv_tvcards[btv->c.type].audio_mode_gpio)
3649                 btv->audio_mode_gpio=bttv_tvcards[btv->c.type].audio_mode_gpio;
3650
3651         if (bttv_tvcards[btv->c.type].digital_mode == DIGITAL_MODE_CAMERA) {
3652                 /* detect Bt832 chip for quartzsight digital camera */
3653                 if ((bttv_I2CRead(btv, I2C_ADDR_BT832_ALT1, "Bt832") >=0) ||
3654                     (bttv_I2CRead(btv, I2C_ADDR_BT832_ALT2, "Bt832") >=0))
3655                         boot_bt832(btv);
3656         }
3657
3658         if (!autoload)
3659                 return;
3660
3661         if (bttv_tvcards[btv->c.type].tuner == UNSET)
3662                 return;  /* no tuner or related drivers to load */
3663
3664         /* try to detect audio/fader chips */
3665         if (!bttv_tvcards[btv->c.type].no_msp34xx &&
3666             bttv_I2CRead(btv, I2C_ADDR_MSP3400, "MSP34xx") >=0)
3667                 request_module("msp3400");
3668
3669         if (bttv_tvcards[btv->c.type].msp34xx_alt &&
3670             bttv_I2CRead(btv, I2C_ADDR_MSP3400_ALT, "MSP34xx (alternate address)") >=0)
3671                 request_module("msp3400");
3672
3673         if (!bttv_tvcards[btv->c.type].no_tda9875 &&
3674             bttv_I2CRead(btv, I2C_ADDR_TDA9875, "TDA9875") >=0)
3675                 request_module("tda9875");
3676
3677         if (!bttv_tvcards[btv->c.type].no_tda7432 &&
3678             bttv_I2CRead(btv, I2C_ADDR_TDA7432, "TDA7432") >=0)
3679                 request_module("tda7432");
3680
3681         if (bttv_tvcards[btv->c.type].needs_tvaudio)
3682                 request_module("tvaudio");
3683
3684         if (btv->tuner_type != UNSET && btv->tuner_type != TUNER_ABSENT)
3685                 request_module("tuner");
3686 }
3687
3688
3689 /* ----------------------------------------------------------------------- */
3690
3691 static void modtec_eeprom(struct bttv *btv)
3692 {
3693         if( strncmp(&(eeprom_data[0x1e]),"Temic 4066 FY5",14) ==0) {
3694                 btv->tuner_type=TUNER_TEMIC_4066FY5_PAL_I;
3695                 printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n",
3696                        btv->c.nr,&eeprom_data[0x1e]);
3697         } else if (strncmp(&(eeprom_data[0x1e]),"Alps TSBB5",10) ==0) {
3698                 btv->tuner_type=TUNER_ALPS_TSBB5_PAL_I;
3699                 printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n",
3700                        btv->c.nr,&eeprom_data[0x1e]);
3701         } else if (strncmp(&(eeprom_data[0x1e]),"Philips FM1246",14) ==0) {
3702                 btv->tuner_type=TUNER_PHILIPS_NTSC;
3703                 printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n",
3704                        btv->c.nr,&eeprom_data[0x1e]);
3705         } else {
3706                 printk("bttv%d: Modtec: Unknown TunerString: %s\n",
3707                        btv->c.nr,&eeprom_data[0x1e]);
3708         }
3709 }
3710
3711 static void __devinit hauppauge_eeprom(struct bttv *btv)
3712 {
3713         struct tveeprom tv;
3714
3715         tveeprom_hauppauge_analog(&btv->i2c_client, &tv, eeprom_data);
3716         btv->tuner_type = tv.tuner_type;
3717         btv->has_radio  = tv.has_radio;
3718
3719         printk("bttv%d: Hauppauge eeprom indicates model#%d\n",
3720                 btv->c.nr, tv.model);
3721
3722         /*
3723          * Some of the 878 boards have duplicate PCI IDs. Switch the board
3724          * type based on model #.
3725          */
3726         if(tv.model == 64900) {
3727                 printk("bttv%d: Switching board type from %s to %s\n",
3728                         btv->c.nr,
3729                         bttv_tvcards[btv->c.type].name,
3730                         bttv_tvcards[BTTV_BOARD_HAUPPAUGE_IMPACTVCB].name);
3731                 btv->c.type = BTTV_BOARD_HAUPPAUGE_IMPACTVCB;
3732         }
3733 }
3734
3735 static int terratec_active_radio_upgrade(struct bttv *btv)
3736 {
3737         int freq;
3738
3739         btv->has_radio    = 1;
3740         btv->has_matchbox = 1;
3741         btv->mbox_we      = 0x10;
3742         btv->mbox_most    = 0x20;
3743         btv->mbox_clk     = 0x08;
3744         btv->mbox_data    = 0x04;
3745         btv->mbox_mask    = 0x3c;
3746
3747         btv->mbox_iow     = 1 <<  8;
3748         btv->mbox_ior     = 1 <<  9;
3749         btv->mbox_csel    = 1 << 10;
3750
3751         freq=88000/62.5;
3752         tea5757_write(btv, 5 * freq + 0x358); /* write 0x1ed8 */
3753         if (0x1ed8 == tea5757_read(btv)) {
3754                 printk("bttv%d: Terratec Active Radio Upgrade found.\n",
3755                        btv->c.nr);
3756                 btv->has_radio    = 1;
3757                 btv->has_matchbox = 1;
3758         } else {
3759                 btv->has_radio    = 0;
3760                 btv->has_matchbox = 0;
3761         }
3762         return 0;
3763 }
3764
3765
3766 /* ----------------------------------------------------------------------- */
3767
3768 /*
3769  * minimal bootstrap for the WinTV/PVR -- upload altera firmware.
3770  *
3771  * The hcwamc.rbf firmware file is on the Hauppauge driver CD.  Have
3772  * a look at Pvr/pvr45xxx.EXE (self-extracting zip archive, can be
3773  * unpacked with unzip).
3774  */
3775 #define PVR_GPIO_DELAY          10
3776
3777 #define BTTV_ALT_DATA           0x000001
3778 #define BTTV_ALT_DCLK           0x100000
3779 #define BTTV_ALT_NCONFIG        0x800000
3780
3781 static int __devinit pvr_altera_load(struct bttv *btv, const u8 *micro,
3782                                      u32 microlen)
3783 {
3784         u32 n;
3785         u8 bits;
3786         int i;
3787
3788         gpio_inout(0xffffff,BTTV_ALT_DATA|BTTV_ALT_DCLK|BTTV_ALT_NCONFIG);
3789         gpio_write(0);
3790         udelay(PVR_GPIO_DELAY);
3791
3792         gpio_write(BTTV_ALT_NCONFIG);
3793         udelay(PVR_GPIO_DELAY);
3794
3795         for (n = 0; n < microlen; n++) {
3796                 bits = micro[n];
3797                 for (i = 0 ; i < 8 ; i++) {
3798                         gpio_bits(BTTV_ALT_DCLK,0);
3799                         if (bits & 0x01)
3800                                 gpio_bits(BTTV_ALT_DATA,BTTV_ALT_DATA);
3801                         else
3802                                 gpio_bits(BTTV_ALT_DATA,0);
3803                         gpio_bits(BTTV_ALT_DCLK,BTTV_ALT_DCLK);
3804                         bits >>= 1;
3805                 }
3806         }
3807         gpio_bits(BTTV_ALT_DCLK,0);
3808         udelay(PVR_GPIO_DELAY);
3809
3810         /* begin Altera init loop (Not necessary,but doesn't hurt) */
3811         for (i = 0 ; i < 30 ; i++) {
3812                 gpio_bits(BTTV_ALT_DCLK,0);
3813                 gpio_bits(BTTV_ALT_DCLK,BTTV_ALT_DCLK);
3814         }
3815         gpio_bits(BTTV_ALT_DCLK,0);
3816         return 0;
3817 }
3818
3819 static int __devinit pvr_boot(struct bttv *btv)
3820 {
3821         const struct firmware *fw_entry;
3822         int rc;
3823
3824         rc = request_firmware(&fw_entry, "hcwamc.rbf", &btv->c.pci->dev);
3825         if (rc != 0) {
3826                 printk(KERN_WARNING "bttv%d: no altera firmware [via hotplug]\n",
3827                        btv->c.nr);
3828                 return rc;
3829         }
3830         rc = pvr_altera_load(btv, fw_entry->data, fw_entry->size);
3831         printk(KERN_INFO "bttv%d: altera firmware upload %s\n",
3832                btv->c.nr, (rc < 0) ? "failed" : "ok");
3833         release_firmware(fw_entry);
3834         return rc;
3835 }
3836
3837 /* ----------------------------------------------------------------------- */
3838 /* some osprey specific stuff                                              */
3839
3840 static void __devinit osprey_eeprom(struct bttv *btv, const u8 ee[256])
3841 {
3842         int i;
3843         u32 serial = 0;
3844         int cardid = -1;
3845
3846         /* This code will nevery actually get called in this case.... */
3847         if (btv->c.type == BTTV_BOARD_UNKNOWN) {
3848                 /* this might be an antique... check for MMAC label in eeprom */
3849                 if (!strncmp(ee, "MMAC", 4)) {
3850                         u8 checksum = 0;
3851                         for (i = 0; i < 21; i++)
3852                                 checksum += ee[i];
3853                         if (checksum != ee[21])
3854                                 return;
3855                         cardid = BTTV_BOARD_OSPREY1x0_848;
3856                         for (i = 12; i < 21; i++)
3857                                 serial *= 10, serial += ee[i] - '0';
3858                 }
3859         } else {
3860                 unsigned short type;
3861
3862                 for (i = 4*16; i < 8*16; i += 16) {
3863                         u16 checksum = ip_compute_csum(ee + i, 16);
3864
3865                         if ((checksum&0xff) + (checksum>>8) == 0xff)
3866                                 break;
3867                 }
3868                 if (i >= 8*16)
3869                         return;
3870                 ee += i;
3871
3872                 /* found a valid descriptor */
3873                 type = get_unaligned_be16((__be16 *)(ee+4));
3874
3875                 switch(type) {
3876                 /* 848 based */
3877                 case 0x0004:
3878                         cardid = BTTV_BOARD_OSPREY1x0_848;
3879                         break;
3880                 case 0x0005:
3881                         cardid = BTTV_BOARD_OSPREY101_848;
3882                         break;
3883
3884                 /* 878 based */
3885                 case 0x0012:
3886                 case 0x0013:
3887                         cardid = BTTV_BOARD_OSPREY1x0;
3888                         break;
3889                 case 0x0014:
3890                 case 0x0015:
3891                         cardid = BTTV_BOARD_OSPREY1x1;
3892                         break;
3893                 case 0x0016:
3894                 case 0x0017:
3895                 case 0x0020:
3896                         cardid = BTTV_BOARD_OSPREY1x1_SVID;
3897                         break;
3898                 case 0x0018:
3899                 case 0x0019:
3900                 case 0x001E:
3901                 case 0x001F:
3902                         cardid = BTTV_BOARD_OSPREY2xx;
3903                         break;
3904                 case 0x001A:
3905                 case 0x001B:
3906                         cardid = BTTV_BOARD_OSPREY2x0_SVID;
3907                         break;
3908                 case 0x0040:
3909                         cardid = BTTV_BOARD_OSPREY500;
3910                         break;
3911                 case 0x0050:
3912                 case 0x0056:
3913                         cardid = BTTV_BOARD_OSPREY540;
3914                         /* bttv_osprey_540_init(btv); */
3915                         break;
3916                 case 0x0060:
3917                 case 0x0070:
3918                 case 0x00A0:
3919                         cardid = BTTV_BOARD_OSPREY2x0;
3920                         /* enable output on select control lines */
3921                         gpio_inout(0xffffff,0x000303);
3922                         break;
3923                 case 0x00D8:
3924                         cardid = BTTV_BOARD_OSPREY440;
3925                         break;
3926                 default:
3927                         /* unknown...leave generic, but get serial # */
3928                         printk(KERN_INFO "bttv%d: "
3929                                "osprey eeprom: unknown card type 0x%04x\n",
3930                                btv->c.nr, type);
3931                         break;
3932                 }
3933                 serial = get_unaligned_be32((__be32 *)(ee+6));
3934         }
3935
3936         printk(KERN_INFO "bttv%d: osprey eeprom: card=%d '%s' serial=%u\n",
3937                btv->c.nr, cardid,
3938                cardid>0 ? bttv_tvcards[cardid].name : "Unknown", serial);
3939
3940         if (cardid<0 || btv->c.type == cardid)
3941                 return;
3942
3943         /* card type isn't set correctly */
3944         if (card[btv->c.nr] < bttv_num_tvcards) {
3945                 printk(KERN_WARNING "bttv%d: osprey eeprom: "
3946                        "Not overriding user specified card type\n", btv->c.nr);
3947         } else {
3948                 printk(KERN_INFO "bttv%d: osprey eeprom: "
3949                        "Changing card type from %d to %d\n", btv->c.nr,
3950                        btv->c.type, cardid);
3951                 btv->c.type = cardid;
3952         }
3953 }
3954
3955 /* ----------------------------------------------------------------------- */
3956 /* AVermedia specific stuff, from  bktr_card.c                             */
3957
3958 static int tuner_0_table[] = {
3959         TUNER_PHILIPS_NTSC,  TUNER_PHILIPS_PAL /* PAL-BG*/,
3960         TUNER_PHILIPS_PAL,   TUNER_PHILIPS_PAL /* PAL-I*/,
3961         TUNER_PHILIPS_PAL,   TUNER_PHILIPS_PAL,
3962         TUNER_PHILIPS_SECAM, TUNER_PHILIPS_SECAM,
3963         TUNER_PHILIPS_SECAM, TUNER_PHILIPS_PAL,
3964         TUNER_PHILIPS_FM1216ME_MK3 };
3965
3966 static int tuner_1_table[] = {
3967         TUNER_TEMIC_NTSC,  TUNER_TEMIC_PAL,
3968         TUNER_TEMIC_PAL,   TUNER_TEMIC_PAL,
3969         TUNER_TEMIC_PAL,   TUNER_TEMIC_PAL,
3970         TUNER_TEMIC_4012FY5, TUNER_TEMIC_4012FY5, /* TUNER_TEMIC_SECAM */
3971         TUNER_TEMIC_4012FY5, TUNER_TEMIC_PAL};
3972
3973 static void __devinit avermedia_eeprom(struct bttv *btv)
3974 {
3975         int tuner_make, tuner_tv_fm, tuner_format, tuner_type = 0;
3976
3977         tuner_make      = (eeprom_data[0x41] & 0x7);
3978         tuner_tv_fm     = (eeprom_data[0x41] & 0x18) >> 3;
3979         tuner_format    = (eeprom_data[0x42] & 0xf0) >> 4;
3980         btv->has_remote = (eeprom_data[0x42] & 0x01);
3981
3982         if (tuner_make == 0 || tuner_make == 2)
3983                 if (tuner_format <= 0x0a)
3984                         tuner_type = tuner_0_table[tuner_format];
3985         if (tuner_make == 1)
3986                 if (tuner_format <= 9)
3987                         tuner_type = tuner_1_table[tuner_format];
3988
3989         if (tuner_make == 4)
3990                 if (tuner_format == 0x09)
3991                         tuner_type = TUNER_LG_NTSC_NEW_TAPC; /* TAPC-G702P */
3992
3993         printk(KERN_INFO "bttv%d: Avermedia eeprom[0x%02x%02x]: tuner=",
3994                 btv->c.nr, eeprom_data[0x41], eeprom_data[0x42]);
3995         if (tuner_type) {
3996                 btv->tuner_type = tuner_type;
3997                 printk(KERN_CONT "%d", tuner_type);
3998         } else
3999                 printk(KERN_CONT "Unknown type");
4000         printk(KERN_CONT " radio:%s remote control:%s\n",
4001                tuner_tv_fm     ? "yes" : "no",
4002                btv->has_remote ? "yes" : "no");
4003 }
4004
4005 /* used on Voodoo TV/FM (Voodoo 200), S0 wired to 0x10000 */
4006 void bttv_tda9880_setnorm(struct bttv *btv, int norm)
4007 {
4008         /* fix up our card entry */
4009         if(norm==V4L2_STD_NTSC) {
4010                 bttv_tvcards[BTTV_BOARD_VOODOOTV_FM].gpiomux[TVAUDIO_INPUT_TUNER]=0x957fff;
4011                 bttv_tvcards[BTTV_BOARD_VOODOOTV_FM].gpiomute=0x957fff;
4012                 bttv_tvcards[BTTV_BOARD_VOODOOTV_200].gpiomux[TVAUDIO_INPUT_TUNER]=0x957fff;
4013                 bttv_tvcards[BTTV_BOARD_VOODOOTV_200].gpiomute=0x957fff;
4014                 dprintk("bttv_tda9880_setnorm to NTSC\n");
4015         }
4016         else {
4017                 bttv_tvcards[BTTV_BOARD_VOODOOTV_FM].gpiomux[TVAUDIO_INPUT_TUNER]=0x947fff;
4018                 bttv_tvcards[BTTV_BOARD_VOODOOTV_FM].gpiomute=0x947fff;
4019                 bttv_tvcards[BTTV_BOARD_VOODOOTV_200].gpiomux[TVAUDIO_INPUT_TUNER]=0x947fff;
4020                 bttv_tvcards[BTTV_BOARD_VOODOOTV_200].gpiomute=0x947fff;
4021                 dprintk("bttv_tda9880_setnorm to PAL\n");
4022         }
4023         /* set GPIO according */
4024         gpio_bits(bttv_tvcards[btv->c.type].gpiomask,
4025                   bttv_tvcards[btv->c.type].gpiomux[btv->audio]);
4026 }
4027
4028
4029 /*
4030  * reset/enable the MSP on some Hauppauge cards
4031  * Thanks to Kyösti Mälkki (kmalkki@cc.hut.fi)!
4032  *
4033  * Hauppauge:  pin  5
4034  * Voodoo:     pin 20
4035  */
4036 static void __devinit boot_msp34xx(struct bttv *btv, int pin)
4037 {
4038         int mask = (1 << pin);
4039
4040         gpio_inout(mask,mask);
4041         gpio_bits(mask,0);
4042         udelay(2500);
4043         gpio_bits(mask,mask);
4044
4045         if (bttv_gpio)
4046                 bttv_gpio_tracking(btv,"msp34xx");
4047         if (bttv_verbose)
4048                 printk(KERN_INFO "bttv%d: Hauppauge/Voodoo msp34xx: reset line "
4049                        "init [%d]\n", btv->c.nr, pin);
4050 }
4051
4052 static void __devinit boot_bt832(struct bttv *btv)
4053 {
4054 }
4055
4056 /* ----------------------------------------------------------------------- */
4057 /*  Imagenation L-Model PXC200 Framegrabber */
4058 /*  This is basically the same procedure as
4059  *  used by Alessandro Rubini in his pxc200
4060  *  driver, but using BTTV functions */
4061
4062 static void __devinit init_PXC200(struct bttv *btv)
4063 {
4064         static int vals[] __devinitdata = { 0x08, 0x09, 0x0a, 0x0b, 0x0d, 0x0d,
4065                                             0x01, 0x02, 0x03, 0x04, 0x05, 0x06,
4066                                             0x00 };
4067         unsigned int i;
4068         int tmp;
4069         u32 val;
4070
4071         /* Initialise GPIO-connevted stuff */
4072         gpio_inout(0xffffff, (1<<13));
4073         gpio_write(0);
4074         udelay(3);
4075         gpio_write(1<<13);
4076         /* GPIO inputs are pulled up, so no need to drive
4077          * reset pin any longer */
4078         gpio_bits(0xffffff, 0);
4079         if (bttv_gpio)
4080                 bttv_gpio_tracking(btv,"pxc200");
4081
4082         /*  we could/should try and reset/control the AD pots? but
4083             right now  we simply  turned off the crushing.  Without
4084             this the AGC drifts drifts
4085             remember the EN is reverse logic -->
4086             setting BT848_ADC_AGC_EN disable the AGC
4087             tboult@eecs.lehigh.edu
4088         */
4089
4090         btwrite(BT848_ADC_RESERVED|BT848_ADC_AGC_EN, BT848_ADC);
4091
4092         /*      Initialise MAX517 DAC */
4093         printk(KERN_INFO "Setting DAC reference voltage level ...\n");
4094         bttv_I2CWrite(btv,0x5E,0,0x80,1);
4095
4096         /*      Initialise 12C508 PIC */
4097         /*      The I2CWrite and I2CRead commmands are actually to the
4098          *      same chips - but the R/W bit is included in the address
4099          *      argument so the numbers are different */
4100
4101
4102         printk(KERN_INFO "Initialising 12C508 PIC chip ...\n");
4103
4104         /* First of all, enable the clock line. This is used in the PXC200-F */
4105         val = btread(BT848_GPIO_DMA_CTL);
4106         val |= BT848_GPIO_DMA_CTL_GPCLKMODE;
4107         btwrite(val, BT848_GPIO_DMA_CTL);
4108
4109         /* Then, push to 0 the reset pin long enough to reset the *
4110          * device same as above for the reset line, but not the same
4111          * value sent to the GPIO-connected stuff
4112          * which one is the good one? */
4113         gpio_inout(0xffffff,(1<<2));
4114         gpio_write(0);
4115         udelay(10);
4116         gpio_write(1<<2);
4117
4118         for (i = 0; i < ARRAY_SIZE(vals); i++) {
4119                 tmp=bttv_I2CWrite(btv,0x1E,0,vals[i],1);
4120                 if (tmp != -1) {
4121                         printk(KERN_INFO
4122                                "I2C Write(%2.2x) = %i\nI2C Read () = %2.2x\n\n",
4123                                vals[i],tmp,bttv_I2CRead(btv,0x1F,NULL));
4124                 }
4125         }
4126
4127         printk(KERN_INFO "PXC200 Initialised.\n");
4128 }
4129
4130
4131
4132 /* ----------------------------------------------------------------------- */
4133 /*
4134  *  The Adlink RTV-24 (aka Angelo) has some special initialisation to unlock
4135  *  it. This apparently involves the following procedure for each 878 chip:
4136  *
4137  *  1) write 0x00C3FEFF to the GPIO_OUT_EN register
4138  *
4139  *  2)  write to GPIO_DATA
4140  *      - 0x0E
4141  *      - sleep 1ms
4142  *      - 0x10 + 0x0E
4143  *      - sleep 10ms
4144  *      - 0x0E
4145  *     read from GPIO_DATA into buf (uint_32)
4146  *      - if ( data>>18 & 0x01 != 0) || ( buf>>19 & 0x01 != 1 )
4147  *                 error. ERROR_CPLD_Check_Failed stop.
4148  *
4149  *  3) write to GPIO_DATA
4150  *      - write 0x4400 + 0x0E
4151  *      - sleep 10ms
4152  *      - write 0x4410 + 0x0E
4153  *      - sleep 1ms
4154  *      - write 0x0E
4155  *     read from GPIO_DATA into buf (uint_32)
4156  *      - if ( buf>>18 & 0x01 ) || ( buf>>19 & 0x01 != 0 )
4157  *                error. ERROR_CPLD_Check_Failed.
4158  */
4159 /* ----------------------------------------------------------------------- */
4160 static void
4161 init_RTV24 (struct bttv *btv)
4162 {
4163         uint32_t dataRead = 0;
4164         long watchdog_value = 0x0E;
4165
4166         printk (KERN_INFO
4167                 "bttv%d: Adlink RTV-24 initialisation in progress ...\n",
4168                 btv->c.nr);
4169
4170         btwrite (0x00c3feff, BT848_GPIO_OUT_EN);
4171
4172         btwrite (0 + watchdog_value, BT848_GPIO_DATA);
4173         msleep (1);
4174         btwrite (0x10 + watchdog_value, BT848_GPIO_DATA);
4175         msleep (10);
4176         btwrite (0 + watchdog_value, BT848_GPIO_DATA);
4177
4178         dataRead = btread (BT848_GPIO_DATA);
4179
4180         if ((((dataRead >> 18) & 0x01) != 0) || (((dataRead >> 19) & 0x01) != 1)) {
4181                 printk (KERN_INFO
4182                         "bttv%d: Adlink RTV-24 initialisation(1) ERROR_CPLD_Check_Failed (read %d)\n",
4183                         btv->c.nr, dataRead);
4184         }
4185
4186         btwrite (0x4400 + watchdog_value, BT848_GPIO_DATA);
4187         msleep (10);
4188         btwrite (0x4410 + watchdog_value, BT848_GPIO_DATA);
4189         msleep (1);
4190         btwrite (watchdog_value, BT848_GPIO_DATA);
4191         msleep (1);
4192         dataRead = btread (BT848_GPIO_DATA);
4193
4194         if ((((dataRead >> 18) & 0x01) != 0) || (((dataRead >> 19) & 0x01) != 0)) {
4195                 printk (KERN_INFO
4196                         "bttv%d: Adlink RTV-24 initialisation(2) ERROR_CPLD_Check_Failed (read %d)\n",
4197                         btv->c.nr, dataRead);
4198
4199                 return;
4200         }
4201
4202         printk (KERN_INFO
4203                 "bttv%d: Adlink RTV-24 initialisation complete.\n", btv->c.nr);
4204 }
4205
4206
4207
4208 /* ----------------------------------------------------------------------- */
4209 /* Miro Pro radio stuff -- the tea5757 is connected to some GPIO ports     */
4210 /*
4211  * Copyright (c) 1999 Csaba Halasz <qgehali@uni-miskolc.hu>
4212  * This code is placed under the terms of the GNU General Public License
4213  *
4214  * Brutally hacked by Dan Sheridan <dan.sheridan@contact.org.uk> djs52 8/3/00
4215  */
4216
4217 static void bus_low(struct bttv *btv, int bit)
4218 {
4219         if (btv->mbox_ior) {
4220                 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4221                           btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4222                 udelay(5);
4223         }
4224
4225         gpio_bits(bit,0);
4226         udelay(5);
4227
4228         if (btv->mbox_ior) {
4229                 gpio_bits(btv->mbox_iow | btv->mbox_csel, 0);
4230                 udelay(5);
4231         }
4232 }
4233
4234 static void bus_high(struct bttv *btv, int bit)
4235 {
4236         if (btv->mbox_ior) {
4237                 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4238                           btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4239                 udelay(5);
4240         }
4241
4242         gpio_bits(bit,bit);
4243         udelay(5);
4244
4245         if (btv->mbox_ior) {
4246                 gpio_bits(btv->mbox_iow | btv->mbox_csel, 0);
4247                 udelay(5);
4248         }
4249 }
4250
4251 static int bus_in(struct bttv *btv, int bit)
4252 {
4253         if (btv->mbox_ior) {
4254                 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4255                           btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4256                 udelay(5);
4257
4258                 gpio_bits(btv->mbox_iow | btv->mbox_csel, 0);
4259                 udelay(5);
4260         }
4261         return gpio_read() & (bit);
4262 }
4263
4264 /* TEA5757 register bits */
4265 #define TEA_FREQ                0:14
4266 #define TEA_BUFFER              15:15
4267
4268 #define TEA_SIGNAL_STRENGTH     16:17
4269
4270 #define TEA_PORT1               18:18
4271 #define TEA_PORT0               19:19
4272
4273 #define TEA_BAND                20:21
4274 #define TEA_BAND_FM             0
4275 #define TEA_BAND_MW             1
4276 #define TEA_BAND_LW             2
4277 #define TEA_BAND_SW             3
4278
4279 #define TEA_MONO                22:22
4280 #define TEA_ALLOW_STEREO        0
4281 #define TEA_FORCE_MONO          1
4282
4283 #define TEA_SEARCH_DIRECTION    23:23
4284 #define TEA_SEARCH_DOWN         0
4285 #define TEA_SEARCH_UP           1
4286
4287 #define TEA_STATUS              24:24
4288 #define TEA_STATUS_TUNED        0
4289 #define TEA_STATUS_SEARCHING    1
4290
4291 /* Low-level stuff */
4292 static int tea5757_read(struct bttv *btv)
4293 {
4294         unsigned long timeout;
4295         int value = 0;
4296         int i;
4297
4298         /* better safe than sorry */
4299         gpio_inout(btv->mbox_mask, btv->mbox_clk | btv->mbox_we);
4300
4301         if (btv->mbox_ior) {
4302                 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4303                           btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4304                 udelay(5);
4305         }
4306
4307         if (bttv_gpio)
4308                 bttv_gpio_tracking(btv,"tea5757 read");
4309
4310         bus_low(btv,btv->mbox_we);
4311         bus_low(btv,btv->mbox_clk);
4312
4313         udelay(10);
4314         timeout= jiffies + msecs_to_jiffies(1000);
4315
4316         /* wait for DATA line to go low; error if it doesn't */
4317         while (bus_in(btv,btv->mbox_data) && time_before(jiffies, timeout))
4318                 schedule();
4319         if (bus_in(btv,btv->mbox_data)) {
4320                 printk(KERN_WARNING "bttv%d: tea5757: read timeout\n",btv->c.nr);
4321                 return -1;
4322         }
4323
4324         dprintk("bttv%d: tea5757:",btv->c.nr);
4325         for (i = 0; i < 24; i++) {
4326                 udelay(5);
4327                 bus_high(btv,btv->mbox_clk);
4328                 udelay(5);
4329                 dprintk("%c",(bus_in(btv,btv->mbox_most) == 0)?'T':'-');
4330                 bus_low(btv,btv->mbox_clk);
4331                 value <<= 1;
4332                 value |= (bus_in(btv,btv->mbox_data) == 0)?0:1;  /* MSB first */
4333                 dprintk("%c", (bus_in(btv,btv->mbox_most) == 0)?'S':'M');
4334         }
4335         dprintk("\nbttv%d: tea5757: read 0x%X\n", btv->c.nr, value);
4336         return value;
4337 }
4338
4339 static int tea5757_write(struct bttv *btv, int value)
4340 {
4341         int i;
4342         int reg = value;
4343
4344         gpio_inout(btv->mbox_mask, btv->mbox_clk | btv->mbox_we | btv->mbox_data);
4345
4346         if (btv->mbox_ior) {
4347                 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4348                           btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4349                 udelay(5);
4350         }
4351         if (bttv_gpio)
4352                 bttv_gpio_tracking(btv,"tea5757 write");
4353
4354         dprintk("bttv%d: tea5757: write 0x%X\n", btv->c.nr, value);
4355         bus_low(btv,btv->mbox_clk);
4356         bus_high(btv,btv->mbox_we);
4357         for (i = 0; i < 25; i++) {
4358                 if (reg & 0x1000000)
4359                         bus_high(btv,btv->mbox_data);
4360                 else
4361                         bus_low(btv,btv->mbox_data);
4362                 reg <<= 1;
4363                 bus_high(btv,btv->mbox_clk);
4364                 udelay(10);
4365                 bus_low(btv,btv->mbox_clk);
4366                 udelay(10);
4367         }
4368         bus_low(btv,btv->mbox_we);  /* unmute !!! */
4369         return 0;
4370 }
4371
4372 void tea5757_set_freq(struct bttv *btv, unsigned short freq)
4373 {
4374         dprintk("tea5757_set_freq %d\n",freq);
4375         tea5757_write(btv, 5 * freq + 0x358); /* add 10.7MHz (see docs) */
4376 }
4377
4378 /* RemoteVision MX (rv605) muxsel helper [Miguel Freitas]
4379  *
4380  * This is needed because rv605 don't use a normal multiplex, but a crosspoint
4381  * switch instead (CD22M3494E). This IC can have multiple active connections
4382  * between Xn (input) and Yn (output) pins. We need to clear any existing
4383  * connection prior to establish a new one, pulsing the STROBE pin.
4384  *
4385  * The board hardwire Y0 (xpoint) to MUX1 and MUXOUT to Yin.
4386  * GPIO pins are wired as:
4387  *  GPIO[0:3] - AX[0:3] (xpoint) - P1[0:3] (microcontroller)
4388  *  GPIO[4:6] - AY[0:2] (xpoint) - P1[4:6] (microcontroller)
4389  *  GPIO[7]   - DATA (xpoint)    - P1[7] (microcontroller)
4390  *  GPIO[8]   -                  - P3[5] (microcontroller)
4391  *  GPIO[9]   - RESET (xpoint)   - P3[6] (microcontroller)
4392  *  GPIO[10]  - STROBE (xpoint)  - P3[7] (microcontroller)
4393  *  GPINTR    -                  - P3[4] (microcontroller)
4394  *
4395  * The microcontroller is a 80C32 like. It should be possible to change xpoint
4396  * configuration either directly (as we are doing) or using the microcontroller
4397  * which is also wired to I2C interface. I have no further info on the
4398  * microcontroller features, one would need to disassembly the firmware.
4399  * note: the vendor refused to give any information on this product, all
4400  *       that stuff was found using a multimeter! :)
4401  */
4402 static void rv605_muxsel(struct bttv *btv, unsigned int input)
4403 {
4404         /* reset all conections */
4405         gpio_bits(0x200,0x200);
4406         mdelay(1);
4407         gpio_bits(0x200,0x000);
4408         mdelay(1);
4409
4410         /* create a new connection */
4411         gpio_bits(0x480,0x080);
4412         gpio_bits(0x480,0x480);
4413         mdelay(1);
4414         gpio_bits(0x480,0x080);
4415         mdelay(1);
4416 }
4417
4418 /* Tibet Systems 'Progress DVR' CS16 muxsel helper [Chris Fanning]
4419  *
4420  * The CS16 (available on eBay cheap) is a PCI board with four Fusion
4421  * 878A chips, a PCI bridge, an Atmel microcontroller, four sync seperator
4422  * chips, ten eight input analog multiplexors, a not chip and a few
4423  * other components.
4424  *
4425  * 16 inputs on a secondary bracket are provided and can be selected
4426  * from each of the four capture chips.  Two of the eight input
4427  * multiplexors are used to select from any of the 16 input signals.
4428  *
4429  * Unsupported hardware capabilities:
4430  *  . A video output monitor on the secondary bracket can be selected from
4431  *    one of the 878A chips.
4432  *  . Another passthrough but I haven't spent any time investigating it.
4433  *  . Digital I/O (logic level connected to GPIO) is available from an
4434  *    onboard header.
4435  *
4436  * The on chip input mux should always be set to 2.
4437  * GPIO[16:19] - Video input selection
4438  * GPIO[0:3]   - Video output monitor select (only available from one 878A)
4439  * GPIO[?:?]   - Digital I/O.
4440  *
4441  * There is an ATMEL microcontroller with an 8031 core on board.  I have not
4442  * determined what function (if any) it provides.  With the microcontroller
4443  * and sync seperator chips a guess is that it might have to do with video
4444  * switching and maybe some digital I/O.
4445  */
4446 static void tibetCS16_muxsel(struct bttv *btv, unsigned int input)
4447 {
4448         /* video mux */
4449         gpio_bits(0x0f0000, input << 16);
4450 }
4451
4452 static void tibetCS16_init(struct bttv *btv)
4453 {
4454         /* enable gpio bits, mask obtained via btSpy */
4455         gpio_inout(0xffffff, 0x0f7fff);
4456         gpio_write(0x0f7fff);
4457 }
4458
4459 /*
4460  * The following routines for the Kodicom-4400r get a little mind-twisting.
4461  * There is a "master" controller and three "slave" controllers, together
4462  * an analog switch which connects any of 16 cameras to any of the BT87A's.
4463  * The analog switch is controlled by the "master", but the detection order
4464  * of the four BT878A chips is in an order which I just don't understand.
4465  * The "master" is actually the second controller to be detected.  The
4466  * logic on the board uses logical numbers for the 4 controllers, but
4467  * those numbers are different from the detection sequence.  When working
4468  * with the analog switch, we need to "map" from the detection sequence
4469  * over to the board's logical controller number.  This mapping sequence
4470  * is {3, 0, 2, 1}, i.e. the first controller to be detected is logical
4471  * unit 3, the second (which is the master) is logical unit 0, etc.
4472  * We need to maintain the status of the analog switch (which of the 16
4473  * cameras is connected to which of the 4 controllers).  Rather than
4474  * add to the bttv structure for this, we use the data reserved for
4475  * the mbox (unused for this card type).
4476  */
4477
4478 /*
4479  * First a routine to set the analog switch, which controls which camera
4480  * is routed to which controller.  The switch comprises an X-address
4481  * (gpio bits 0-3, representing the camera, ranging from 0-15), and a
4482  * Y-address (gpio bits 4-6, representing the controller, ranging from 0-3).
4483  * A data value (gpio bit 7) of '1' enables the switch, and '0' disables
4484  * the switch.  A STROBE bit (gpio bit 8) latches the data value into the
4485  * specified address.  The idea is to set the address and data, then bring
4486  * STROBE high, and finally bring STROBE back to low.
4487  */
4488 static void kodicom4400r_write(struct bttv *btv,
4489                                unsigned char xaddr,
4490                                unsigned char yaddr,
4491                                unsigned char data) {
4492         unsigned int udata;
4493
4494         udata = (data << 7) | ((yaddr&3) << 4) | (xaddr&0xf);
4495         gpio_bits(0x1ff, udata);                /* write ADDR and DAT */
4496         gpio_bits(0x1ff, udata | (1 << 8));     /* strobe high */
4497         gpio_bits(0x1ff, udata);                /* strobe low */
4498 }
4499
4500 /*
4501  * Next the mux select.  Both the "master" and "slave" 'cards' (controllers)
4502  * use this routine.  The routine finds the "master" for the card, maps
4503  * the controller number from the detected position over to the logical
4504  * number, writes the appropriate data to the analog switch, and housekeeps
4505  * the local copy of the switch information.  The parameter 'input' is the
4506  * requested camera number (0 - 15).
4507  */
4508 static void kodicom4400r_muxsel(struct bttv *btv, unsigned int input)
4509 {
4510         char *sw_status;
4511         int xaddr, yaddr;
4512         struct bttv *mctlr;
4513         static unsigned char map[4] = {3, 0, 2, 1};
4514
4515         mctlr = master[btv->c.nr];
4516         if (mctlr == NULL) {    /* ignore if master not yet detected */
4517                 return;
4518         }
4519         yaddr = (btv->c.nr - mctlr->c.nr + 1) & 3; /* the '&' is for safety */
4520         yaddr = map[yaddr];
4521         sw_status = (char *)(&mctlr->mbox_we);
4522         xaddr = input & 0xf;
4523         /* Check if the controller/camera pair has changed, else ignore */
4524         if (sw_status[yaddr] != xaddr)
4525         {
4526                 /* "open" the old switch, "close" the new one, save the new */
4527                 kodicom4400r_write(mctlr, sw_status[yaddr], yaddr, 0);
4528                 sw_status[yaddr] = xaddr;
4529                 kodicom4400r_write(mctlr, xaddr, yaddr, 1);
4530         }
4531 }
4532
4533 /*
4534  * During initialisation, we need to reset the analog switch.  We
4535  * also preset the switch to map the 4 connectors on the card to the
4536  * *user's* (see above description of kodicom4400r_muxsel) channels
4537  * 0 through 3
4538  */
4539 static void kodicom4400r_init(struct bttv *btv)
4540 {
4541         char *sw_status = (char *)(&btv->mbox_we);
4542         int ix;
4543
4544         gpio_inout(0x0003ff, 0x0003ff);
4545         gpio_write(1 << 9);     /* reset MUX */
4546         gpio_write(0);
4547         /* Preset camera 0 to the 4 controllers */
4548         for (ix = 0; ix < 4; ix++) {
4549                 sw_status[ix] = ix;
4550                 kodicom4400r_write(btv, ix, ix, 1);
4551         }
4552         /*
4553          * Since this is the "master", we need to set up the
4554          * other three controller chips' pointers to this structure
4555          * for later use in the muxsel routine.
4556          */
4557         if ((btv->c.nr<1) || (btv->c.nr>BTTV_MAX-3))
4558             return;
4559         master[btv->c.nr-1] = btv;
4560         master[btv->c.nr]   = btv;
4561         master[btv->c.nr+1] = btv;
4562         master[btv->c.nr+2] = btv;
4563 }
4564
4565 /* The Grandtec X-Guard framegrabber card uses two Dual 4-channel
4566  * video multiplexers to provide up to 16 video inputs. These
4567  * multiplexers are controlled by the lower 8 GPIO pins of the
4568  * bt878. The multiplexers probably Pericom PI5V331Q or similar.
4569
4570  * xxx0 is pin xxx of multiplexer U5,
4571  * yyy1 is pin yyy of multiplexer U2
4572  */
4573 #define ENA0    0x01
4574 #define ENB0    0x02
4575 #define ENA1    0x04
4576 #define ENB1    0x08
4577
4578 #define IN10    0x10
4579 #define IN00    0x20
4580 #define IN11    0x40
4581 #define IN01    0x80
4582
4583 static void xguard_muxsel(struct bttv *btv, unsigned int input)
4584 {
4585         static const int masks[] = {
4586                 ENB0, ENB0|IN00, ENB0|IN10, ENB0|IN00|IN10,
4587                 ENA0, ENA0|IN00, ENA0|IN10, ENA0|IN00|IN10,
4588                 ENB1, ENB1|IN01, ENB1|IN11, ENB1|IN01|IN11,
4589                 ENA1, ENA1|IN01, ENA1|IN11, ENA1|IN01|IN11,
4590         };
4591         gpio_write(masks[input%16]);
4592 }
4593 static void picolo_tetra_init(struct bttv *btv)
4594 {
4595         /*This is the video input redirection fonctionality : I DID NOT USED IT. */
4596         btwrite (0x08<<16,BT848_GPIO_DATA);/*GPIO[19] [==> 4053 B+C] set to 1 */
4597         btwrite (0x04<<16,BT848_GPIO_DATA);/*GPIO[18] [==> 4053 A]  set to 1*/
4598 }
4599 static void picolo_tetra_muxsel (struct bttv* btv, unsigned int input)
4600 {
4601
4602         dprintk (KERN_DEBUG "bttv%d : picolo_tetra_muxsel =>  input = %d\n",btv->c.nr,input);
4603         /*Just set the right path in the analog multiplexers : channel 1 -> 4 ==> Analog Mux ==> MUX0*/
4604         /*GPIO[20]&GPIO[21] used to choose the right input*/
4605         btwrite (input<<20,BT848_GPIO_DATA);
4606
4607 }
4608
4609 /*
4610  * ivc120_muxsel [Added by Alan Garfield <alan@fromorbit.com>]
4611  *
4612  * The IVC120G security card has 4 i2c controlled TDA8540 matrix
4613  * swichers to provide 16 channels to MUX0. The TDA8540's have
4614  * 4 independent outputs and as such the IVC120G also has the
4615  * optional "Monitor Out" bus. This allows the card to be looking
4616  * at one input while the monitor is looking at another.
4617  *
4618  * Since I've couldn't be bothered figuring out how to add an
4619  * independant muxsel for the monitor bus, I've just set it to
4620  * whatever the card is looking at.
4621  *
4622  *  OUT0 of the TDA8540's is connected to MUX0         (0x03)
4623  *  OUT1 of the TDA8540's is connected to "Monitor Out"        (0x0C)
4624  *
4625  *  TDA8540_ALT3 IN0-3 = Channel 13 - 16       (0x03)
4626  *  TDA8540_ALT4 IN0-3 = Channel 1 - 4         (0x03)
4627  *  TDA8540_ALT5 IN0-3 = Channel 5 - 8         (0x03)
4628  *  TDA8540_ALT6 IN0-3 = Channel 9 - 12                (0x03)
4629  *
4630  */
4631
4632 /* All 7 possible sub-ids for the TDA8540 Matrix Switcher */
4633 #define I2C_TDA8540        0x90
4634 #define I2C_TDA8540_ALT1   0x92
4635 #define I2C_TDA8540_ALT2   0x94
4636 #define I2C_TDA8540_ALT3   0x96
4637 #define I2C_TDA8540_ALT4   0x98
4638 #define I2C_TDA8540_ALT5   0x9a
4639 #define I2C_TDA8540_ALT6   0x9c
4640
4641 static void ivc120_muxsel(struct bttv *btv, unsigned int input)
4642 {
4643         /* Simple maths */
4644         int key = input % 4;
4645         int matrix = input / 4;
4646
4647         dprintk("bttv%d: ivc120_muxsel: Input - %02d | TDA - %02d | In - %02d\n",
4648                 btv->c.nr, input, matrix, key);
4649
4650         /* Handles the input selection on the TDA8540's */
4651         bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x00,
4652                       ((matrix == 3) ? (key | key << 2) : 0x00), 1);
4653         bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x00,
4654                       ((matrix == 0) ? (key | key << 2) : 0x00), 1);
4655         bttv_I2CWrite(btv, I2C_TDA8540_ALT5, 0x00,
4656                       ((matrix == 1) ? (key | key << 2) : 0x00), 1);
4657         bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x00,
4658                       ((matrix == 2) ? (key | key << 2) : 0x00), 1);
4659
4660         /* Handles the output enables on the TDA8540's */
4661         bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x02,
4662                       ((matrix == 3) ? 0x03 : 0x00), 1);  /* 13 - 16 */
4663         bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x02,
4664                       ((matrix == 0) ? 0x03 : 0x00), 1);  /* 1-4 */
4665         bttv_I2CWrite(btv, I2C_TDA8540_ALT5, 0x02,
4666                       ((matrix == 1) ? 0x03 : 0x00), 1);  /* 5-8 */
4667         bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x02,
4668                       ((matrix == 2) ? 0x03 : 0x00), 1);  /* 9-12 */
4669
4670         /* Selects MUX0 for input on the 878 */
4671         btaor((0)<<5, ~(3<<5), BT848_IFORM);
4672 }
4673
4674
4675 /* PXC200 muxsel helper
4676  * luke@syseng.anu.edu.au
4677  * another transplant
4678  * from Alessandro Rubini (rubini@linux.it)
4679  *
4680  * There are 4 kinds of cards:
4681  * PXC200L which is bt848
4682  * PXC200F which is bt848 with PIC controlling mux
4683  * PXC200AL which is bt878
4684  * PXC200AF which is bt878 with PIC controlling mux
4685  */
4686 #define PX_CFG_PXC200F 0x01
4687 #define PX_FLAG_PXC200A  0x00001000 /* a pxc200A is bt-878 based */
4688 #define PX_I2C_PIC       0x0f
4689 #define PX_PXC200A_CARDID 0x200a1295
4690 #define PX_I2C_CMD_CFG   0x00
4691
4692 static void PXC200_muxsel(struct bttv *btv, unsigned int input)
4693 {
4694         int rc;
4695         long mux;
4696         int bitmask;
4697         unsigned char buf[2];
4698
4699         /* Read PIC config to determine if this is a PXC200F */
4700         /* PX_I2C_CMD_CFG*/
4701         buf[0]=0;
4702         buf[1]=0;
4703         rc=bttv_I2CWrite(btv,(PX_I2C_PIC<<1),buf[0],buf[1],1);
4704         if (rc) {
4705           printk(KERN_DEBUG "bttv%d: PXC200_muxsel: pic cfg write failed:%d\n", btv->c.nr,rc);
4706           /* not PXC ? do nothing */
4707           return;
4708         }
4709
4710         rc=bttv_I2CRead(btv,(PX_I2C_PIC<<1),NULL);
4711         if (!(rc & PX_CFG_PXC200F)) {
4712           printk(KERN_DEBUG "bttv%d: PXC200_muxsel: not PXC200F rc:%d \n", btv->c.nr,rc);
4713           return;
4714         }
4715
4716
4717         /* The multiplexer in the 200F is handled by the GPIO port */
4718         /* get correct mapping between inputs  */
4719         /*  mux = bttv_tvcards[btv->type].muxsel[input] & 3; */
4720         /* ** not needed!?   */
4721         mux = input;
4722
4723         /* make sure output pins are enabled */
4724         /* bitmask=0x30f; */
4725         bitmask=0x302;
4726         /* check whether we have a PXC200A */
4727         if (btv->cardid == PX_PXC200A_CARDID)  {
4728            bitmask ^= 0x180; /* use 7 and 9, not 8 and 9 */
4729            bitmask |= 7<<4; /* the DAC */
4730         }
4731         btwrite(bitmask, BT848_GPIO_OUT_EN);
4732
4733         bitmask = btread(BT848_GPIO_DATA);
4734         if (btv->cardid == PX_PXC200A_CARDID)
4735           bitmask = (bitmask & ~0x280) | ((mux & 2) << 8) | ((mux & 1) << 7);
4736         else /* older device */
4737           bitmask = (bitmask & ~0x300) | ((mux & 3) << 8);
4738         btwrite(bitmask,BT848_GPIO_DATA);
4739
4740         /*
4741          * Was "to be safe, set the bt848 to input 0"
4742          * Actually, since it's ok at load time, better not messing
4743          * with these bits (on PXC200AF you need to set mux 2 here)
4744          *
4745          * needed because bttv-driver sets mux before calling this function
4746          */
4747         if (btv->cardid == PX_PXC200A_CARDID)
4748           btaor(2<<5, ~BT848_IFORM_MUXSEL, BT848_IFORM);
4749         else /* older device */
4750           btand(~BT848_IFORM_MUXSEL,BT848_IFORM);
4751
4752         printk(KERN_DEBUG "bttv%d: setting input channel to:%d\n", btv->c.nr,(int)mux);
4753 }
4754
4755 /* ----------------------------------------------------------------------- */
4756 /* motherboard chipset specific stuff                                      */
4757
4758 void __init bttv_check_chipset(void)
4759 {
4760         int pcipci_fail = 0;
4761         struct pci_dev *dev = NULL;
4762
4763         if (pci_pci_problems & (PCIPCI_FAIL|PCIAGP_FAIL))       /* should check if target is AGP */
4764                 pcipci_fail = 1;
4765         if (pci_pci_problems & (PCIPCI_TRITON|PCIPCI_NATOMA|PCIPCI_VIAETBF))
4766                 triton1 = 1;
4767         if (pci_pci_problems & PCIPCI_VSFX)
4768                 vsfx = 1;
4769 #ifdef PCIPCI_ALIMAGIK
4770         if (pci_pci_problems & PCIPCI_ALIMAGIK)
4771                 latency = 0x0A;
4772 #endif
4773
4774
4775         /* print warnings about any quirks found */
4776         if (triton1)
4777                 printk(KERN_INFO "bttv: Host bridge needs ETBF enabled.\n");
4778         if (vsfx)
4779                 printk(KERN_INFO "bttv: Host bridge needs VSFX enabled.\n");
4780         if (pcipci_fail) {
4781                 printk(KERN_INFO "bttv: bttv and your chipset may not work "
4782                                                         "together.\n");
4783                 if (!no_overlay) {
4784                         printk(KERN_INFO "bttv: overlay will be disabled.\n");
4785                         no_overlay = 1;
4786                 } else {
4787                         printk(KERN_INFO "bttv: overlay forced. Use this "
4788                                                 "option at your own risk.\n");
4789                 }
4790         }
4791         if (UNSET != latency)
4792                 printk(KERN_INFO "bttv: pci latency fixup [%d]\n",latency);
4793         while ((dev = pci_get_device(PCI_VENDOR_ID_INTEL,
4794                                       PCI_DEVICE_ID_INTEL_82441, dev))) {
4795                 unsigned char b;
4796                 pci_read_config_byte(dev, 0x53, &b);
4797                 if (bttv_debug)
4798                         printk(KERN_INFO "bttv: Host bridge: 82441FX Natoma, "
4799                                "bufcon=0x%02x\n",b);
4800         }
4801 }
4802
4803 int __devinit bttv_handle_chipset(struct bttv *btv)
4804 {
4805         unsigned char command;
4806
4807         if (!triton1 && !vsfx && UNSET == latency)
4808                 return 0;
4809
4810         if (bttv_verbose) {
4811                 if (triton1)
4812                         printk(KERN_INFO "bttv%d: enabling ETBF (430FX/VP3 compatibilty)\n",btv->c.nr);
4813                 if (vsfx && btv->id >= 878)
4814                         printk(KERN_INFO "bttv%d: enabling VSFX\n",btv->c.nr);
4815                 if (UNSET != latency)
4816                         printk(KERN_INFO "bttv%d: setting pci timer to %d\n",
4817                                btv->c.nr,latency);
4818         }
4819
4820         if (btv->id < 878) {
4821                 /* bt848 (mis)uses a bit in the irq mask for etbf */
4822                 if (triton1)
4823                         btv->triton1 = BT848_INT_ETBF;
4824         } else {
4825                 /* bt878 has a bit in the pci config space for it */
4826                 pci_read_config_byte(btv->c.pci, BT878_DEVCTRL, &command);
4827                 if (triton1)
4828                         command |= BT878_EN_TBFX;
4829                 if (vsfx)
4830                         command |= BT878_EN_VSFX;
4831                 pci_write_config_byte(btv->c.pci, BT878_DEVCTRL, command);
4832         }
4833         if (UNSET != latency)
4834                 pci_write_config_byte(btv->c.pci, PCI_LATENCY_TIMER, latency);
4835         return 0;
4836 }
4837
4838
4839 /*
4840  * Local variables:
4841  * c-basic-offset: 8
4842  * End:
4843  */