2 # Generic video config states
7 depends on VIDEO_DEV && VIDEO_V4L2_COMMON
8 default VIDEO_DEV && VIDEO_V4L2_COMMON
12 depends on VIDEO_DEV && VIDEO_V4L2_COMMON && VIDEO_ALLOW_V4L1
13 default VIDEO_DEV && VIDEO_V4L2_COMMON && VIDEO_ALLOW_V4L1
18 config VIDEOBUF_DMA_SG
23 config VIDEOBUF_VMALLOC
27 config VIDEOBUF_DMA_CONTIG
49 depends on MEDIA_TUNER
52 # Multimedia Video device configuration
55 menuconfig VIDEO_CAPTURE_DRIVERS
56 bool "Video capture adapters"
60 Say Y here to enable selecting the video adapters for
61 webcams, analog TV, and hybrid analog/digital TV.
62 Some of those devices also supports FM radio.
64 if VIDEO_CAPTURE_DRIVERS && VIDEO_V4L2
66 config VIDEO_ADV_DEBUG
67 bool "Enable advanced debug functionality"
70 Say Y here to enable advanced debugging functionality on some
74 config VIDEO_HELPER_CHIPS_AUTO
75 bool "Autoselect pertinent encoders/decoders and other helper chips"
78 Most video cards may require additional modules to encode or
79 decode audio/video standards. This option will autoselect
80 all pertinent modules to each selected video module.
82 Unselect this only if you know exactly what you are doing, since
83 it may break support on some boards.
88 tristate "I2C module for IR" if !VIDEO_HELPER_CHIPS_AUTO
89 depends on I2C && VIDEO_IR
92 Most boards have an IR chip directly connected via GPIO. However,
93 some video boards have the IR connected via I2C bus.
95 If your board doesn't have an I2C IR chip, you may disable this
101 # Encoder / Decoder module configuration
104 menu "Encoders/decoders and other helper chips"
105 depends on !VIDEO_HELPER_CHIPS_AUTO
107 comment "Audio decoders"
110 tristate "Simple audio decoder chips"
111 depends on VIDEO_V4L2 && I2C
113 Support for several audio decoder chips found on some bt8xx boards:
114 Philips: tda9840, tda9873h, tda9874h/a, tda9850, tda985x, tea6300,
115 tea6320, tea6420, tda8425, ta8874z.
116 Microchip: pic16c54 based design on ProVideo PV951 board.
118 To compile this driver as a module, choose M here: the
119 module will be called tvaudio.
122 tristate "Philips TDA7432 audio processor"
123 depends on VIDEO_V4L2 && I2C
125 Support for tda7432 audio decoder chip found on some bt8xx boards.
127 To compile this driver as a module, choose M here: the
128 module will be called tda7432.
131 tristate "Philips TDA9840 audio processor"
134 Support for tda9840 audio decoder chip found on some Zoran boards.
136 To compile this driver as a module, choose M here: the
137 module will be called tda9840.
140 tristate "Philips TDA9875 audio processor"
141 depends on VIDEO_V4L2 && I2C
143 Support for tda9875 audio decoder chip found on some bt8xx boards.
145 To compile this driver as a module, choose M here: the
146 module will be called tda9875.
148 config VIDEO_TEA6415C
149 tristate "Philips TEA6415C audio processor"
152 Support for tea6415c audio decoder chip found on some bt8xx boards.
154 To compile this driver as a module, choose M here: the
155 module will be called tea6415c.
158 tristate "Philips TEA6420 audio processor"
161 Support for tea6420 audio decoder chip found on some bt8xx boards.
163 To compile this driver as a module, choose M here: the
164 module will be called tea6420.
167 tristate "Micronas MSP34xx audio decoders"
168 depends on VIDEO_V4L2 && I2C
170 Support for the Micronas MSP34xx series of audio decoders.
172 To compile this driver as a module, choose M here: the
173 module will be called msp3400.
176 tristate "Cirrus Logic CS5345 audio ADC"
177 depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
179 Support for the Cirrus Logic CS5345 24-bit, 192 kHz
180 stereo A/D converter.
182 To compile this driver as a module, choose M here: the
183 module will be called cs5345.
185 config VIDEO_CS53L32A
186 tristate "Cirrus Logic CS53L32A audio ADC"
187 depends on VIDEO_V4L2 && I2C
189 Support for the Cirrus Logic CS53L32A low voltage
190 stereo A/D converter.
192 To compile this driver as a module, choose M here: the
193 module will be called cs53l32a.
196 tristate "Mitsubishi M52790 A/V switch"
197 depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
199 Support for the Mitsubishi M52790 A/V switch.
201 To compile this driver as a module, choose M here: the
202 module will be called m52790.
204 config VIDEO_TLV320AIC23B
205 tristate "Texas Instruments TLV320AIC23B audio codec"
206 depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
208 Support for the Texas Instruments TLV320AIC23B audio codec.
210 To compile this driver as a module, choose M here: the
211 module will be called tlv320aic23b.
214 tristate "Wolfson Microelectronics WM8775 audio ADC with input mixer"
215 depends on VIDEO_V4L2 && I2C
217 Support for the Wolfson Microelectronics WM8775 high
218 performance stereo A/D Converter with a 4 channel input mixer.
220 To compile this driver as a module, choose M here: the
221 module will be called wm8775.
224 tristate "Wolfson Microelectronics WM8739 stereo audio ADC"
225 depends on VIDEO_V4L2 && I2C
227 Support for the Wolfson Microelectronics WM8739
228 stereo A/D Converter.
230 To compile this driver as a module, choose M here: the
231 module will be called wm8739.
233 config VIDEO_VP27SMPX
234 tristate "Panasonic VP27s internal MPX"
235 depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
237 Support for the internal MPX of the Panasonic VP27s tuner.
239 To compile this driver as a module, choose M here: the
240 module will be called vp27smpx.
242 comment "Video decoders"
245 tristate "BT819A VideoStream decoder"
246 depends on VIDEO_V4L1 && I2C
248 Support for BT819A video decoder.
250 To compile this driver as a module, choose M here: the
251 module will be called bt819.
254 tristate "BT856 VideoStream decoder"
255 depends on VIDEO_V4L1 && I2C
257 Support for BT856 video decoder.
259 To compile this driver as a module, choose M here: the
260 module will be called bt856.
263 tristate "BT866 VideoStream decoder"
264 depends on VIDEO_V4L1 && I2C
266 Support for BT866 video decoder.
268 To compile this driver as a module, choose M here: the
269 module will be called bt866.
272 tristate "KS0127 video decoder"
273 depends on VIDEO_V4L1 && I2C
275 Support for KS0127 video decoder.
277 This chip is used on AverMedia AVS6EYES Zoran-based MJPEG
280 To compile this driver as a module, choose M here: the
281 module will be called ks0127.
284 tristate "OmniVision OV7670 sensor support"
285 depends on I2C && VIDEO_V4L2
287 This is a Video4Linux2 sensor-level driver for the OmniVision
288 OV7670 VGA camera. It currently only works with the M88ALP01
292 tristate "TCM825x camera sensor support"
293 depends on I2C && VIDEO_V4L2
295 This is a driver for the Toshiba TCM825x VGA camera sensor.
296 It is used for example in Nokia N800.
299 tristate "OmniVision OV9640 sensor support"
300 depends on I2C && VIDEO_V4L2
302 This is a Video4Linux2 sensor-level driver for the OmniVision
303 OV9640 camera. It is currently working with the TI OMAP2
307 tristate "Philips SAA7110 video decoder"
308 depends on VIDEO_V4L1 && I2C
310 Support for the Philips SAA7110 video decoders.
312 To compile this driver as a module, choose M here: the
313 module will be called saa7110.
316 tristate "Philips SAA7111 video decoder"
317 depends on VIDEO_V4L1 && I2C
319 Support for the Philips SAA711 video decoder.
321 To compile this driver as a module, choose M here: the
322 module will be called saa7111.
325 tristate "Philips SAA7114 video decoder"
326 depends on VIDEO_V4L1 && I2C
328 Support for the Philips SAA7114 video decoder. This driver
329 is used only on Zoran driver and should be moved soon to
332 To compile this driver as a module, choose M here: the
333 module will be called saa7114.
336 tristate "Philips SAA7113/4/5 video decoders"
337 depends on VIDEO_V4L2 && I2C
339 Support for the Philips SAA7113/4/5 video decoders.
341 To compile this driver as a module, choose M here: the
342 module will be called saa7115.
345 tristate "Philips SAA7171/3/4 audio/video decoders"
346 depends on VIDEO_V4L2 && I2C
348 Support for the Philips SAA7171/3/4 audio/video decoders.
350 To compile this driver as a module, choose M here: the
351 module will be called saa717x.
354 tristate "Philips SAA7191 video decoder"
355 depends on VIDEO_V4L1 && I2C
357 Support for the Philips SAA7191 video decoder.
359 To compile this driver as a module, choose M here: the
360 module will be called saa7191.
363 tristate "Texas Instruments TVP5150 video decoder"
364 depends on VIDEO_V4L2 && I2C
366 Support for the Texas Instruments TVP5150 video decoder.
368 To compile this driver as a module, choose M here: the
369 module will be called tvp5150.
372 tristate "vpx3220a, vpx3216b & vpx3214c video decoders"
373 depends on VIDEO_V4L1 && I2C
375 Support for VPX322x video decoders.
377 To compile this driver as a module, choose M here: the
378 module will be called vpx3220.
380 comment "Video and audio decoders"
382 source "drivers/media/video/cx25840/Kconfig"
384 comment "MPEG video encoders"
387 tristate "Conexant CX2341x MPEG encoders"
388 depends on VIDEO_V4L2 && EXPERIMENTAL && VIDEO_V4L2_COMMON
390 Support for the Conexant CX23416 MPEG encoders
391 and CX23415 MPEG encoder/decoders.
393 This module currently supports the encoding functions only.
395 To compile this driver as a module, choose M here: the
396 module will be called cx2341x.
398 comment "Video encoders"
401 tristate "Philips SAA7127/9 digital video encoders"
402 depends on VIDEO_V4L2 && I2C
404 Support for the Philips SAA7127/9 digital video encoders.
406 To compile this driver as a module, choose M here: the
407 module will be called saa7127.
410 tristate "Philips SAA7185 video encoder"
411 depends on VIDEO_V4L1 && I2C
413 Support for the Philips SAA7185 video encoder.
415 To compile this driver as a module, choose M here: the
416 module will be called saa7185.
419 tristate "Analog Devices ADV7170 video encoder"
420 depends on VIDEO_V4L1 && I2C
422 Support for the Analog Devices ADV7170 video encoder driver
424 To compile this driver as a module, choose M here: the
425 module will be called adv7170.
428 tristate "Analog Devices ADV7175 video encoder"
429 depends on VIDEO_V4L1 && I2C
431 Support for the Analog Devices ADV7175 video encoder driver
433 To compile this driver as a module, choose M here: the
434 module will be called adv7175.
436 comment "Video improvement chips"
438 config VIDEO_UPD64031A
439 tristate "NEC Electronics uPD64031A Ghost Reduction"
440 depends on VIDEO_V4L2 && I2C
442 Support for the NEC Electronics uPD64031A Ghost Reduction
443 video chip. It is most often found in NTSC TV cards made for
444 Japan and is used to reduce the 'ghosting' effect that can
445 be present in analog TV broadcasts.
447 To compile this driver as a module, choose M here: the
448 module will be called upd64031a.
450 config VIDEO_UPD64083
451 tristate "NEC Electronics uPD64083 3-Dimensional Y/C separation"
452 depends on VIDEO_V4L2 && I2C
454 Support for the NEC Electronics uPD64083 3-Dimensional Y/C
455 separation video chip. It is used to improve the quality of
456 the colors of a composite signal.
458 To compile this driver as a module, choose M here: the
459 module will be called upd64083.
461 endmenu # encoder / decoder chips
464 tristate "Virtual Video Driver"
465 depends on VIDEO_DEV && VIDEO_V4L2 && !SPARC32 && !SPARC64
466 select VIDEOBUF_VMALLOC
469 Enables a virtual video driver. This device shows a color bar
470 and a timestamp, as a real device would generate by using V4L2
472 Say Y here if you want to test video apps or debug V4L devices.
475 source "drivers/media/video/bt8xx/Kconfig"
478 tristate "SAA6588 Radio Chip RDS decoder support on BT848 cards"
479 depends on I2C && VIDEO_BT848
482 Support for Radio Data System (RDS) decoder. This allows seeing
483 radio station identification transmitted using this standard.
484 Currently, it works only with bt8x8 chips.
486 To compile this driver as a module, choose M here: the
487 module will be called saa6588.
490 tristate "Mediavision Pro Movie Studio Video For Linux"
491 depends on ISA && VIDEO_V4L1
493 Say Y if you have such a thing.
495 To compile this driver as a module, choose M here: the
496 module will be called pms.
499 tristate "Quickcam BW Video For Linux"
500 depends on PARPORT && VIDEO_V4L1
502 Say Y have if you the black and white version of the QuickCam
503 camera. See the next option for the color version.
505 To compile this driver as a module, choose M here: the
506 module will be called bw-qcam.
509 tristate "QuickCam Colour Video For Linux (EXPERIMENTAL)"
510 depends on EXPERIMENTAL && PARPORT && VIDEO_V4L1
512 This is the video4linux driver for the colour version of the
513 Connectix QuickCam. If you have one of these cameras, say Y here,
514 otherwise say N. This driver does not work with the original
515 monochrome QuickCam, QuickCam VC or QuickClip. It is also available
516 as a module (c-qcam).
517 Read <file:Documentation/video4linux/CQcam.txt> for more information.
520 tristate "W9966CF Webcam (FlyCam Supra and others) Video For Linux"
521 depends on PARPORT_1284 && PARPORT && VIDEO_V4L1
523 Video4linux driver for Winbond's w9966 based Webcams.
524 Currently tested with the LifeView FlyCam Supra.
525 If you have one of these cameras, say Y here
527 This driver is also available as a module (w9966).
529 Check out <file:Documentation/video4linux/w9966.txt> for more
533 tristate "CPiA Video For Linux"
534 depends on VIDEO_V4L1
536 This is the video4linux driver for cameras based on Vision's CPiA
537 (Colour Processor Interface ASIC), such as the Creative Labs Video
538 Blaster Webcam II. If you have one of these cameras, say Y here
539 and select parallel port and/or USB lowlevel support below,
540 otherwise say N. This will not work with the Creative Webcam III.
542 Please read <file:Documentation/video4linux/README.cpia> for more
545 This driver is also available as a module (cpia).
548 tristate "CPiA Parallel Port Lowlevel Support"
549 depends on PARPORT_1284 && VIDEO_CPIA && PARPORT
551 This is the lowlevel parallel port support for cameras based on
552 Vision's CPiA (Colour Processor Interface ASIC), such as the
553 Creative Webcam II. If you have the parallel port version of one
554 of these cameras, say Y here, otherwise say N. It is also available
555 as a module (cpia_pp).
557 config VIDEO_CPIA_USB
558 tristate "CPiA USB Lowlevel Support"
559 depends on VIDEO_CPIA && USB
561 This is the lowlevel USB support for cameras based on Vision's CPiA
562 (Colour Processor Interface ASIC), such as the Creative Webcam II.
563 If you have the USB version of one of these cameras, say Y here,
564 otherwise say N. This will not work with the Creative Webcam III.
565 It is also available as a module (cpia_usb).
567 source "drivers/media/video/cpia2/Kconfig"
569 config VIDEO_SAA5246A
570 tristate "SAA5246A, SAA5281 Teletext processor"
571 depends on I2C && VIDEO_V4L2
573 Support for I2C bus based teletext using the SAA5246A or SAA5281
574 chip. Useful only if you live in Europe.
576 To compile this driver as a module, choose M here: the
577 module will be called saa5246a.
580 tristate "SAA5249 Teletext processor"
581 depends on I2C && VIDEO_V4L2
583 Support for I2C bus based teletext using the SAA5249 chip. At the
584 moment this is only useful on some European WinTV cards.
586 To compile this driver as a module, choose M here: the
587 module will be called saa5249.
590 tristate "SAB3036 tuner"
591 depends on I2C && VIDEO_V4L1
593 Say Y here to include support for Philips SAB3036 compatible tuners.
597 tristate "SGI Vino Video For Linux (EXPERIMENTAL)"
598 depends on I2C && SGI_IP22 && EXPERIMENTAL && VIDEO_V4L2
600 select VIDEO_SAA7191 if VIDEO_HELPER_CHIPS_AUTO
602 Say Y here to build in support for the Vino video input system found
603 on SGI Indy machines.
606 tristate "Stradis 4:2:2 MPEG-2 video driver (EXPERIMENTAL)"
607 depends on EXPERIMENTAL && PCI && VIDEO_V4L1 && VIRT_TO_BUS
609 Say Y here to enable support for the Stradis 4:2:2 MPEG-2 video
610 driver for PCI. There is a product page at
611 <http://www.stradis.com/>.
614 tristate "Zoran ZR36057/36067 Video For Linux"
615 depends on PCI && I2C_ALGOBIT && VIDEO_V4L1 && VIRT_TO_BUS
617 Say Y for support for MJPEG capture cards based on the Zoran
618 36057/36067 PCI controller chipset. This includes the Iomega
619 Buz, Pinnacle DC10+ and the Linux Media Labs LML33. There is
620 a driver homepage at <http://mjpeg.sf.net/driver-zoran/>. For
621 more information, check <file:Documentation/video4linux/Zoran>.
623 To compile this driver as a module, choose M here: the
624 module will be called zr36067.
626 config VIDEO_ZORAN_DC30
627 tristate "Pinnacle/Miro DC30(+) support"
628 depends on VIDEO_ZORAN
629 select VIDEO_ADV7175 if VIDEO_HELPER_CHIPS_AUTO
630 select VIDEO_VPX3220 if VIDEO_HELPER_CHIPS_AUTO
632 Support for the Pinnacle/Miro DC30(+) MJPEG capture/playback
633 card. This also supports really old DC10 cards based on the
634 zr36050 MJPEG codec and zr36016 VFE.
636 config VIDEO_ZORAN_ZR36060
637 tristate "Zoran ZR36060"
638 depends on VIDEO_ZORAN
640 Say Y to support Zoran boards based on 36060 chips.
641 This includes Iomega Bus, Pinnacle DC10, Linux media Labs 33
642 and 33 R10 and AverMedia 6 boards.
644 config VIDEO_ZORAN_BUZ
645 tristate "Iomega Buz support"
646 depends on VIDEO_ZORAN_ZR36060
647 select VIDEO_SAA7111 if VIDEO_HELPER_CHIPS_AUTO
648 select VIDEO_SAA7185 if VIDEO_HELPER_CHIPS_AUTO
650 Support for the Iomega Buz MJPEG capture/playback card.
652 config VIDEO_ZORAN_DC10
653 tristate "Pinnacle/Miro DC10(+) support"
654 depends on VIDEO_ZORAN_ZR36060
655 select VIDEO_SAA7110 if VIDEO_HELPER_CHIPS_AUTO
656 select VIDEO_ADV7175 if VIDEO_HELPER_CHIPS_AUTO
658 Support for the Pinnacle/Miro DC10(+) MJPEG capture/playback
661 config VIDEO_ZORAN_LML33
662 tristate "Linux Media Labs LML33 support"
663 depends on VIDEO_ZORAN_ZR36060
664 select VIDEO_BT819 if VIDEO_HELPER_CHIPS_AUTO
665 select VIDEO_BT856 if VIDEO_HELPER_CHIPS_AUTO
667 Support for the Linux Media Labs LML33 MJPEG capture/playback
670 config VIDEO_ZORAN_LML33R10
671 tristate "Linux Media Labs LML33R10 support"
672 depends on VIDEO_ZORAN_ZR36060
673 select VIDEO_SAA7114 if VIDEO_HELPER_CHIPS_AUTO
674 select VIDEO_ADV7170 if VIDEO_HELPER_CHIPS_AUTO
676 support for the Linux Media Labs LML33R10 MJPEG capture/playback
679 config VIDEO_ZORAN_AVS6EYES
680 tristate "AverMedia 6 Eyes support (EXPERIMENTAL)"
681 depends on VIDEO_ZORAN_ZR36060 && EXPERIMENTAL && VIDEO_V4L1
682 select VIDEO_BT856 if VIDEO_HELPER_CHIPS_AUTO
683 select VIDEO_KS0127 if VIDEO_HELPER_CHIPS_AUTO
685 Support for the AverMedia 6 Eyes video surveillance card.
688 tristate "Sony Vaio Picturebook Motion Eye Video For Linux"
689 depends on PCI && SONY_LAPTOP && VIDEO_V4L1
691 This is the video4linux driver for the Motion Eye camera found
692 in the Vaio Picturebook laptops. Please read the material in
693 <file:Documentation/video4linux/meye.txt> for more information.
695 If you say Y or M here, you need to say Y or M to "Sony Laptop
696 Extras" in the misc device section.
698 To compile this driver as a module, choose M here: the
699 module will be called meye.
701 source "drivers/media/video/saa7134/Kconfig"
704 tristate "Siemens-Nixdorf 'Multimedia eXtension Board'"
705 depends on PCI && VIDEO_V4L1 && I2C
706 select VIDEO_SAA7146_VV
708 select VIDEO_SAA7111 if VIDEO_HELPER_CHIPS_AUTO
709 select VIDEO_TDA9840 if VIDEO_HELPER_CHIPS_AUTO
710 select VIDEO_TEA6415C if VIDEO_HELPER_CHIPS_AUTO
711 select VIDEO_TEA6420 if VIDEO_HELPER_CHIPS_AUTO
713 This is a video4linux driver for the 'Multimedia eXtension Board'
714 TV card by Siemens-Nixdorf.
716 To compile this driver as a module, choose M here: the
717 module will be called mxb.
720 tristate "Philips-Semiconductors 'dpc7146 demonstration board'"
721 depends on PCI && VIDEO_V4L1 && I2C
722 select VIDEO_SAA7146_VV
723 select VIDEO_SAA7111 if VIDEO_HELPER_CHIPS_AUTO
725 This is a video4linux driver for the 'dpc7146 demonstration
726 board' by Philips-Semiconductors. It's the reference design
727 for SAA7146 bases boards, so if you have some unsupported
728 saa7146 based, analog video card, chances are good that it
729 will work with this skeleton driver.
731 To compile this driver as a module, choose M here: the
732 module will be called dpc7146.
734 config VIDEO_HEXIUM_ORION
735 tristate "Hexium HV-PCI6 and Orion frame grabber"
736 depends on PCI && VIDEO_V4L2 && I2C
737 select VIDEO_SAA7146_VV
739 This is a video4linux driver for the Hexium HV-PCI6 and
740 Orion frame grabber cards by Hexium.
742 To compile this driver as a module, choose M here: the
743 module will be called hexium_orion.
745 config VIDEO_HEXIUM_GEMINI
746 tristate "Hexium Gemini frame grabber"
747 depends on PCI && VIDEO_V4L2 && I2C
748 select VIDEO_SAA7146_VV
750 This is a video4linux driver for the Hexium Gemini frame
751 grabber card by Hexium. Please note that the Gemini Dual
752 card is *not* fully supported.
754 To compile this driver as a module, choose M here: the
755 module will be called hexium_gemini.
757 source "drivers/media/video/cx88/Kconfig"
759 source "drivers/media/video/cx23885/Kconfig"
761 source "drivers/media/video/au0828/Kconfig"
763 source "drivers/media/video/ivtv/Kconfig"
765 source drivers/media/video/omap/Kconfig
767 source "drivers/media/video/cx18/Kconfig"
770 tristate "AR devices"
771 depends on M32R && VIDEO_V4L1
773 This is a video4linux driver for the Renesas AR (Artificial Retina)
776 config VIDEO_M32R_AR_M64278
777 tristate "AR device with color module M64278(VGA)"
778 depends on PLAT_M32700UT
781 This is a video4linux driver for the Renesas AR (Artificial
782 Retina) with M64278E-800 camera module.
783 This module supports VGA(640x480 pixels) resolutions.
785 To compile this driver as a module, choose M here: the
786 module will be called arv.
788 config VIDEO_CAFE_CCIC
789 tristate "Marvell 88ALP01 (Cafe) CMOS Camera Controller support"
790 depends on PCI && I2C && VIDEO_V4L2
793 This is a video4linux2 driver for the Marvell 88ALP01 integrated
794 CMOS camera controller. This is the controller found on first-
795 generation OLPC systems.
798 tristate "OMAP 2 Camera support (EXPERIMENTAL)"
800 select VIDEOBUF_DMA_SG
801 depends on VIDEO_V4L2 && ARCH_OMAP24XX
803 Driver for an OMAP 2 camera controller.
807 # USB Multimedia device configuration
810 menuconfig V4L_USB_DRIVERS
811 bool "V4L USB devices"
815 if V4L_USB_DRIVERS && USB
817 source "drivers/media/video/uvc/Kconfig"
819 source "drivers/media/video/gspca/Kconfig"
821 source "drivers/media/video/pvrusb2/Kconfig"
823 source "drivers/media/video/em28xx/Kconfig"
825 source "drivers/media/video/usbvision/Kconfig"
827 source "drivers/media/video/usbvideo/Kconfig"
829 source "drivers/media/video/et61x251/Kconfig"
831 config VIDEO_OVCAMCHIP
832 tristate "OmniVision Camera Chip support"
833 depends on I2C && VIDEO_V4L1
835 Support for the OmniVision OV6xxx and OV7xxx series of camera chips.
836 This driver is intended to be used with the ov511 and w9968cf USB
839 To compile this driver as a module, choose M here: the
840 module will be called ovcamchip.
843 tristate "USB W996[87]CF JPEG Dual Mode Camera support"
844 depends on VIDEO_V4L1 && I2C
845 select VIDEO_OVCAMCHIP
847 Say Y here if you want support for cameras based on OV681 or
848 Winbond W9967CF/W9968CF JPEG USB Dual Mode Camera Chips.
850 This driver has an optional plugin, which is distributed as a
851 separate module only (released under GPL). It allows to use higher
852 resolutions and framerates, but cannot be included in the official
853 Linux kernel for performance purposes.
855 See <file:Documentation/video4linux/w9968cf.txt> for more info.
857 To compile this driver as a module, choose M here: the
858 module will be called w9968cf.
861 tristate "USB OV511 Camera support"
862 depends on VIDEO_V4L1
864 Say Y here if you want to connect this type of camera to your
865 computer's USB port. See <file:Documentation/video4linux/ov511.txt>
866 for more information and for a list of supported cameras.
868 To compile this driver as a module, choose M here: the
869 module will be called ov511.
872 tristate "USB SE401 Camera support"
873 depends on VIDEO_V4L1
875 Say Y here if you want to connect this type of camera to your
876 computer's USB port. See <file:Documentation/video4linux/se401.txt>
877 for more information and for a list of supported cameras.
879 To compile this driver as a module, choose M here: the
880 module will be called se401.
882 source "drivers/media/video/sn9c102/Kconfig"
885 tristate "USB STV680 (Pencam) Camera support"
886 depends on VIDEO_V4L1
888 Say Y here if you want to connect this type of camera to your
889 computer's USB port. This includes the Pencam line of cameras.
890 See <file:Documentation/video4linux/stv680.txt> for more information
891 and for a list of supported cameras.
893 To compile this driver as a module, choose M here: the
894 module will be called stv680.
896 source "drivers/media/video/zc0301/Kconfig"
898 source "drivers/media/video/pwc/Kconfig"
901 tristate "USB ZR364XX Camera support"
902 depends on VIDEO_V4L2
904 Say Y here if you want to connect this type of camera to your
906 See <file:Documentation/video4linux/zr364xx.txt> for more info
907 and list of supported cameras.
909 To compile this driver as a module, choose M here: the
910 module will be called zr364xx.
913 tristate "USB Syntek DC1125 Camera support"
914 depends on VIDEO_V4L2 && EXPERIMENTAL
916 Say Y here if you want to use this type of camera.
917 Supported devices are typically found in some Asus laptops,
918 with USB id 174f:a311 and 05e1:0501. Other Syntek cameras
919 may be supported by the stk11xx driver, from which this is
920 derived, see http://stk11xx.sourceforge.net
922 To compile this driver as a module, choose M here: the
923 module will be called stkwebcam.
926 tristate "USB Sensoray 2255 video capture device"
927 depends on VIDEO_V4L2
928 select VIDEOBUF_VMALLOC
931 Say Y here if you want support for the Sensoray 2255 USB device.
932 This driver can be compiled as a module, called s2255drv.
934 endif # V4L_USB_DRIVERS
937 tristate "SoC camera support"
938 depends on VIDEO_V4L2 && HAS_DMA
941 SoC Camera is a common API to several cameras, not connecting
942 over a bus like PCI or USB. For example some i2c camera connected
943 directly to the data bus of an SoC.
945 config SOC_CAMERA_MT9M001
946 tristate "mt9m001 support"
947 depends on SOC_CAMERA && I2C
948 select GPIO_PCA953X if MT9M001_PCA9536_SWITCH
950 This driver supports MT9M001 cameras from Micron, monochrome
953 config MT9M001_PCA9536_SWITCH
954 bool "pca9536 datawidth switch for mt9m001"
955 depends on SOC_CAMERA_MT9M001 && GENERIC_GPIO
957 Select this if your MT9M001 camera uses a PCA9536 I2C GPIO
958 extender to switch between 8 and 10 bit datawidth modes
960 config SOC_CAMERA_MT9V022
961 tristate "mt9v022 support"
962 depends on SOC_CAMERA && I2C
963 select GPIO_PCA953X if MT9V022_PCA9536_SWITCH
965 This driver supports MT9V022 cameras from Micron
967 config MT9V022_PCA9536_SWITCH
968 bool "pca9536 datawidth switch for mt9v022"
969 depends on SOC_CAMERA_MT9V022 && GENERIC_GPIO
971 Select this if your MT9V022 camera uses a PCA9536 I2C GPIO
972 extender to switch between 8 and 10 bit datawidth modes
974 config SOC_CAMERA_PLATFORM
975 tristate "platform camera support"
976 depends on SOC_CAMERA
978 This is a generic SoC camera platform driver, useful for testing
981 tristate "PXA27x Quick Capture Interface driver"
982 depends on VIDEO_DEV && PXA27x
984 select VIDEOBUF_DMA_SG
986 This is a v4l2 driver for the PXA27x Quick Capture Interface
988 config VIDEO_SH_MOBILE_CEU
989 tristate "SuperH Mobile CEU Interface driver"
992 select VIDEOBUF_DMA_CONTIG
994 This is a v4l2 driver for the SuperH Mobile CEU Interface
996 endif # VIDEO_CAPTURE_DRIVERS