2 # Generic video config states
7 depends on VIDEO_DEV && VIDEO_V4L2_COMMON
8 default VIDEO_DEV && VIDEO_V4L2_COMMON
12 depends on VIDEO_DEV && VIDEO_V4L2_COMMON && VIDEO_ALLOW_V4L1
13 default VIDEO_DEV && VIDEO_V4L2_COMMON && VIDEO_ALLOW_V4L1
18 config VIDEOBUF_DMA_SG
23 config VIDEOBUF_VMALLOC
30 select VIDEOBUF_DMA_SG
41 select VIDEO_IR_I2C if I2C
48 # Multimedia Video device configuration
51 menuconfig VIDEO_CAPTURE_DRIVERS
52 bool "Video capture adapters"
56 Say Y here to enable selecting the video adapters for
57 webcams, analog TV, and hybrid analog/digital TV.
58 Some of those devices also supports FM radio.
60 if VIDEO_CAPTURE_DRIVERS && VIDEO_V4L2
62 config VIDEO_ADV_DEBUG
63 bool "Enable advanced debug functionality"
66 Say Y here to enable advanced debugging functionality on some
70 config VIDEO_HELPER_CHIPS_AUTO
71 bool "Autoselect pertinent encoders/decoders and other helper chips"
74 Most video cards may require additional modules to encode or
75 decode audio/video standards. This option will autoselect
76 all pertinent modules to each selected video module.
78 Unselect this only if you know exactly what you are doing, since
79 it may break support on some boards.
84 # Encoder / Decoder module configuration
87 menu "Encoders/decoders and other helper chips"
88 depends on !VIDEO_HELPER_CHIPS_AUTO
90 comment "Audio decoders"
93 tristate "Simple audio decoder chips"
94 depends on VIDEO_V4L2 && I2C
96 Support for several audio decoder chips found on some bt8xx boards:
97 Philips: tda9840, tda9873h, tda9874h/a, tda9850, tda985x, tea6300,
98 tea6320, tea6420, tda8425, ta8874z.
99 Microchip: pic16c54 based design on ProVideo PV951 board.
101 To compile this driver as a module, choose M here: the
102 module will be called tvaudio.
105 tristate "Philips TDA7432 audio processor"
106 depends on VIDEO_V4L2 && I2C
108 Support for tda7432 audio decoder chip found on some bt8xx boards.
110 To compile this driver as a module, choose M here: the
111 module will be called tda7432.
114 tristate "Philips TDA9840 audio processor"
117 Support for tda9840 audio decoder chip found on some Zoran boards.
119 To compile this driver as a module, choose M here: the
120 module will be called tda9840.
123 tristate "Philips TDA9875 audio processor"
124 depends on VIDEO_V4L2 && I2C
126 Support for tda9875 audio decoder chip found on some bt8xx boards.
128 To compile this driver as a module, choose M here: the
129 module will be called tda9875.
131 config VIDEO_TEA6415C
132 tristate "Philips TEA6415C audio processor"
135 Support for tea6415c audio decoder chip found on some bt8xx boards.
137 To compile this driver as a module, choose M here: the
138 module will be called tea6415c.
141 tristate "Philips TEA6420 audio processor"
144 Support for tea6420 audio decoder chip found on some bt8xx boards.
146 To compile this driver as a module, choose M here: the
147 module will be called tea6420.
150 tristate "Micronas MSP34xx audio decoders"
151 depends on VIDEO_V4L2 && I2C
153 Support for the Micronas MSP34xx series of audio decoders.
155 To compile this driver as a module, choose M here: the
156 module will be called msp3400.
159 tristate "Cirrus Logic CS5345 audio ADC"
160 depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
162 Support for the Cirrus Logic CS5345 24-bit, 192 kHz
163 stereo A/D converter.
165 To compile this driver as a module, choose M here: the
166 module will be called cs5345.
168 config VIDEO_CS53L32A
169 tristate "Cirrus Logic CS53L32A audio ADC"
170 depends on VIDEO_V4L2 && I2C
172 Support for the Cirrus Logic CS53L32A low voltage
173 stereo A/D converter.
175 To compile this driver as a module, choose M here: the
176 module will be called cs53l32a.
179 tristate "Mitsubishi M52790 A/V switch"
180 depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
182 Support for the Mitsubishi M52790 A/V switch.
184 To compile this driver as a module, choose M here: the
185 module will be called m52790.
187 config VIDEO_TLV320AIC23B
188 tristate "Texas Instruments TLV320AIC23B audio codec"
189 depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
191 Support for the Texas Instruments TLV320AIC23B audio codec.
193 To compile this driver as a module, choose M here: the
194 module will be called tlv320aic23b.
197 tristate "Wolfson Microelectronics WM8775 audio ADC with input mixer"
198 depends on VIDEO_V4L2 && I2C
200 Support for the Wolfson Microelectronics WM8775 high
201 performance stereo A/D Converter with a 4 channel input mixer.
203 To compile this driver as a module, choose M here: the
204 module will be called wm8775.
207 tristate "Wolfson Microelectronics WM8739 stereo audio ADC"
208 depends on VIDEO_V4L2 && I2C
210 Support for the Wolfson Microelectronics WM8739
211 stereo A/D Converter.
213 To compile this driver as a module, choose M here: the
214 module will be called wm8739.
216 config VIDEO_VP27SMPX
217 tristate "Panasonic VP27s internal MPX"
218 depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
220 Support for the internal MPX of the Panasonic VP27s tuner.
222 To compile this driver as a module, choose M here: the
223 module will be called vp27smpx.
225 comment "Video decoders"
228 tristate "BT819A VideoStream decoder"
229 depends on VIDEO_V4L1 && I2C
231 Support for BT819A video decoder.
233 To compile this driver as a module, choose M here: the
234 module will be called bt819.
237 tristate "BT856 VideoStream decoder"
238 depends on VIDEO_V4L1 && I2C
240 Support for BT856 video decoder.
242 To compile this driver as a module, choose M here: the
243 module will be called bt856.
246 tristate "BT866 VideoStream decoder"
247 depends on VIDEO_V4L1 && I2C
249 Support for BT866 video decoder.
251 To compile this driver as a module, choose M here: the
252 module will be called bt866.
255 tristate "KS0127 video decoder"
256 depends on VIDEO_V4L1 && I2C
258 Support for KS0127 video decoder.
260 This chip is used on AverMedia AVS6EYES Zoran-based MJPEG
263 To compile this driver as a module, choose M here: the
264 module will be called ks0127.
267 tristate "OmniVision OV7670 sensor support"
268 depends on I2C && VIDEO_V4L2
270 This is a Video4Linux2 sensor-level driver for the OmniVision
271 OV7670 VGA camera. It currently only works with the M88ALP01
275 tristate "TCM825x camera sensor support"
276 depends on I2C && VIDEO_V4L2
278 This is a driver for the Toshiba TCM825x VGA camera sensor.
279 It is used for example in Nokia N800.
282 tristate "OmniVision OV9640 sensor support"
283 depends on I2C && VIDEO_V4L2
285 This is a Video4Linux2 sensor-level driver for the OmniVision
286 OV9640 camera. It is currently working with the TI OMAP2
290 tristate "Philips SAA7110 video decoder"
291 depends on VIDEO_V4L1 && I2C
293 Support for the Philips SAA7110 video decoders.
295 To compile this driver as a module, choose M here: the
296 module will be called saa7110.
299 tristate "Philips SAA7111 video decoder"
300 depends on VIDEO_V4L1 && I2C
302 Support for the Philips SAA711 video decoder.
304 To compile this driver as a module, choose M here: the
305 module will be called saa7111.
308 tristate "Philips SAA7114 video decoder"
309 depends on VIDEO_V4L1 && I2C
311 Support for the Philips SAA7114 video decoder. This driver
312 is used only on Zoran driver and should be moved soon to
315 To compile this driver as a module, choose M here: the
316 module will be called saa7114.
319 tristate "Philips SAA7113/4/5 video decoders"
320 depends on VIDEO_V4L2 && I2C
322 Support for the Philips SAA7113/4/5 video decoders.
324 To compile this driver as a module, choose M here: the
325 module will be called saa7115.
328 tristate "Philips SAA7171/3/4 audio/video decoders"
329 depends on VIDEO_V4L2 && I2C
331 Support for the Philips SAA7171/3/4 audio/video decoders.
333 To compile this driver as a module, choose M here: the
334 module will be called saa717x.
337 tristate "Philips SAA7191 video decoder"
338 depends on VIDEO_V4L1 && I2C
340 Support for the Philips SAA7191 video decoder.
342 To compile this driver as a module, choose M here: the
343 module will be called saa7191.
346 tristate "Texas Instruments TVP5150 video decoder"
347 depends on VIDEO_V4L2 && I2C
349 Support for the Texas Instruments TVP5150 video decoder.
351 To compile this driver as a module, choose M here: the
352 module will be called tvp5150.
355 tristate "vpx3220a, vpx3216b & vpx3214c video decoders"
356 depends on VIDEO_V4L1 && I2C
358 Support for VPX322x video decoders.
360 To compile this driver as a module, choose M here: the
361 module will be called vpx3220.
363 comment "Video and audio decoders"
365 source "drivers/media/video/cx25840/Kconfig"
367 comment "MPEG video encoders"
370 tristate "Conexant CX2341x MPEG encoders"
371 depends on VIDEO_V4L2 && EXPERIMENTAL && VIDEO_V4L2_COMMON
373 Support for the Conexant CX23416 MPEG encoders
374 and CX23415 MPEG encoder/decoders.
376 This module currently supports the encoding functions only.
378 To compile this driver as a module, choose M here: the
379 module will be called cx2341x.
381 comment "Video encoders"
384 tristate "Philips SAA7127/9 digital video encoders"
385 depends on VIDEO_V4L2 && I2C
387 Support for the Philips SAA7127/9 digital video encoders.
389 To compile this driver as a module, choose M here: the
390 module will be called saa7127.
393 tristate "Philips SAA7185 video encoder"
394 depends on VIDEO_V4L1 && I2C
396 Support for the Philips SAA7185 video encoder.
398 To compile this driver as a module, choose M here: the
399 module will be called saa7185.
402 tristate "Analog Devices ADV7170 video encoder"
403 depends on VIDEO_V4L1 && I2C
405 Support for the Analog Devices ADV7170 video encoder driver
407 To compile this driver as a module, choose M here: the
408 module will be called adv7170.
411 tristate "Analog Devices ADV7175 video encoder"
412 depends on VIDEO_V4L1 && I2C
414 Support for the Analog Devices ADV7175 video encoder driver
416 To compile this driver as a module, choose M here: the
417 module will be called adv7175.
419 comment "Video improvement chips"
421 config VIDEO_UPD64031A
422 tristate "NEC Electronics uPD64031A Ghost Reduction"
423 depends on VIDEO_V4L2 && I2C
425 Support for the NEC Electronics uPD64031A Ghost Reduction
426 video chip. It is most often found in NTSC TV cards made for
427 Japan and is used to reduce the 'ghosting' effect that can
428 be present in analog TV broadcasts.
430 To compile this driver as a module, choose M here: the
431 module will be called upd64031a.
433 config VIDEO_UPD64083
434 tristate "NEC Electronics uPD64083 3-Dimensional Y/C separation"
435 depends on VIDEO_V4L2 && I2C
437 Support for the NEC Electronics uPD64083 3-Dimensional Y/C
438 separation video chip. It is used to improve the quality of
439 the colors of a composite signal.
441 To compile this driver as a module, choose M here: the
442 module will be called upd64083.
444 endmenu # encoder / decoder chips
447 tristate "Virtual Video Driver"
448 depends on VIDEO_DEV && VIDEO_V4L2 && !SPARC32 && !SPARC64
449 select VIDEOBUF_VMALLOC
452 Enables a virtual video driver. This device shows a color bar
453 and a timestamp, as a real device would generate by using V4L2
455 Say Y here if you want to test video apps or debug V4L devices.
458 source "drivers/media/video/bt8xx/Kconfig"
461 tristate "SAA6588 Radio Chip RDS decoder support on BT848 cards"
462 depends on I2C && VIDEO_BT848
465 Support for Radio Data System (RDS) decoder. This allows seeing
466 radio station identification transmitted using this standard.
467 Currently, it works only with bt8x8 chips.
469 To compile this driver as a module, choose M here: the
470 module will be called saa6588.
473 tristate "Mediavision Pro Movie Studio Video For Linux"
474 depends on ISA && VIDEO_V4L1
476 Say Y if you have such a thing.
478 To compile this driver as a module, choose M here: the
479 module will be called pms.
482 tristate "PlanB Video-In on PowerMac"
483 depends on PPC_PMAC && VIDEO_V4L1 && BROKEN
485 PlanB is the V4L driver for the PowerMac 7x00/8x00 series video
486 input hardware. If you want to experiment with this, say Y.
487 Otherwise, or if you don't understand a word, say N. See
488 <http://www.cpu.lu/~mlan/linux/dev/planb.html> for more info.
490 Saying M will compile this driver as a module (planb).
493 tristate "Quickcam BW Video For Linux"
494 depends on PARPORT && VIDEO_V4L1
496 Say Y have if you the black and white version of the QuickCam
497 camera. See the next option for the color version.
499 To compile this driver as a module, choose M here: the
500 module will be called bw-qcam.
503 tristate "QuickCam Colour Video For Linux (EXPERIMENTAL)"
504 depends on EXPERIMENTAL && PARPORT && VIDEO_V4L1
506 This is the video4linux driver for the colour version of the
507 Connectix QuickCam. If you have one of these cameras, say Y here,
508 otherwise say N. This driver does not work with the original
509 monochrome QuickCam, QuickCam VC or QuickClip. It is also available
510 as a module (c-qcam).
511 Read <file:Documentation/video4linux/CQcam.txt> for more information.
514 tristate "W9966CF Webcam (FlyCam Supra and others) Video For Linux"
515 depends on PARPORT_1284 && PARPORT && VIDEO_V4L1
517 Video4linux driver for Winbond's w9966 based Webcams.
518 Currently tested with the LifeView FlyCam Supra.
519 If you have one of these cameras, say Y here
521 This driver is also available as a module (w9966).
523 Check out <file:Documentation/video4linux/w9966.txt> for more
527 tristate "CPiA Video For Linux"
528 depends on VIDEO_V4L1
530 This is the video4linux driver for cameras based on Vision's CPiA
531 (Colour Processor Interface ASIC), such as the Creative Labs Video
532 Blaster Webcam II. If you have one of these cameras, say Y here
533 and select parallel port and/or USB lowlevel support below,
534 otherwise say N. This will not work with the Creative Webcam III.
536 Please read <file:Documentation/video4linux/README.cpia> for more
539 This driver is also available as a module (cpia).
542 tristate "CPiA Parallel Port Lowlevel Support"
543 depends on PARPORT_1284 && VIDEO_CPIA && PARPORT
545 This is the lowlevel parallel port support for cameras based on
546 Vision's CPiA (Colour Processor Interface ASIC), such as the
547 Creative Webcam II. If you have the parallel port version of one
548 of these cameras, say Y here, otherwise say N. It is also available
549 as a module (cpia_pp).
551 config VIDEO_CPIA_USB
552 tristate "CPiA USB Lowlevel Support"
553 depends on VIDEO_CPIA && USB
555 This is the lowlevel USB support for cameras based on Vision's CPiA
556 (Colour Processor Interface ASIC), such as the Creative Webcam II.
557 If you have the USB version of one of these cameras, say Y here,
558 otherwise say N. This will not work with the Creative Webcam III.
559 It is also available as a module (cpia_usb).
561 source "drivers/media/video/cpia2/Kconfig"
563 config VIDEO_SAA5246A
564 tristate "SAA5246A, SAA5281 Teletext processor"
565 depends on I2C && VIDEO_V4L2
567 Support for I2C bus based teletext using the SAA5246A or SAA5281
568 chip. Useful only if you live in Europe.
570 To compile this driver as a module, choose M here: the
571 module will be called saa5246a.
574 tristate "SAA5249 Teletext processor"
575 depends on I2C && VIDEO_V4L2
577 Support for I2C bus based teletext using the SAA5249 chip. At the
578 moment this is only useful on some European WinTV cards.
580 To compile this driver as a module, choose M here: the
581 module will be called saa5249.
584 tristate "SAB3036 tuner"
585 depends on I2C && VIDEO_V4L1
587 Say Y here to include support for Philips SAB3036 compatible tuners.
591 tristate "SGI Vino Video For Linux (EXPERIMENTAL)"
592 depends on I2C && SGI_IP22 && EXPERIMENTAL && VIDEO_V4L2
594 select VIDEO_SAA7191 if VIDEO_HELPER_CHIPS_AUTO
596 Say Y here to build in support for the Vino video input system found
597 on SGI Indy machines.
600 tristate "Stradis 4:2:2 MPEG-2 video driver (EXPERIMENTAL)"
601 depends on EXPERIMENTAL && PCI && VIDEO_V4L1 && VIRT_TO_BUS
603 Say Y here to enable support for the Stradis 4:2:2 MPEG-2 video
604 driver for PCI. There is a product page at
605 <http://www.stradis.com/>.
607 config VIDEO_ZORAN_ZR36060
611 tristate "Zoran ZR36057/36067 Video For Linux"
612 depends on PCI && I2C_ALGOBIT && VIDEO_V4L1 && VIRT_TO_BUS
614 Say Y for support for MJPEG capture cards based on the Zoran
615 36057/36067 PCI controller chipset. This includes the Iomega
616 Buz, Pinnacle DC10+ and the Linux Media Labs LML33. There is
617 a driver homepage at <http://mjpeg.sf.net/driver-zoran/>. For
618 more information, check <file:Documentation/video4linux/Zoran>.
620 To compile this driver as a module, choose M here: the
621 module will be called zr36067.
623 config VIDEO_ZORAN_BUZ
624 tristate "Iomega Buz support"
625 depends on VIDEO_ZORAN
626 select VIDEO_SAA7111 if VIDEO_HELPER_CHIPS_AUTO
627 select VIDEO_SAA7185 if VIDEO_HELPER_CHIPS_AUTO
628 select VIDEO_ZORAN_ZR36060
630 Support for the Iomega Buz MJPEG capture/playback card.
632 config VIDEO_ZORAN_DC10
633 tristate "Pinnacle/Miro DC10(+) support"
634 depends on VIDEO_ZORAN
636 select VIDEO_ADV7175 if VIDEO_HELPER_CHIPS_AUTO
637 select VIDEO_ZORAN_ZR36060
639 Support for the Pinnacle/Miro DC10(+) MJPEG capture/playback
642 config VIDEO_ZORAN_DC30
643 tristate "Pinnacle/Miro DC30(+) support"
644 depends on VIDEO_ZORAN
645 select VIDEO_ADV7175 if VIDEO_HELPER_CHIPS_AUTO
646 select VIDEO_VPX3220 if VIDEO_HELPER_CHIPS_AUTO
648 Support for the Pinnacle/Miro DC30(+) MJPEG capture/playback
649 card. This also supports really old DC10 cards based on the
650 zr36050 MJPEG codec and zr36016 VFE.
652 config VIDEO_ZORAN_LML33
653 tristate "Linux Media Labs LML33 support"
654 depends on VIDEO_ZORAN
655 select VIDEO_BT819 if VIDEO_HELPER_CHIPS_AUTO
656 select VIDEO_BT856 if VIDEO_HELPER_CHIPS_AUTO
657 select VIDEO_ZORAN_ZR36060
659 Support for the Linux Media Labs LML33 MJPEG capture/playback
662 config VIDEO_ZORAN_LML33R10
663 tristate "Linux Media Labs LML33R10 support"
664 depends on VIDEO_ZORAN
665 select VIDEO_SAA7114 if VIDEO_HELPER_CHIPS_AUTO
666 select VIDEO_ADV7170 if VIDEO_HELPER_CHIPS_AUTO
667 select VIDEO_ZORAN_ZR36060
669 support for the Linux Media Labs LML33R10 MJPEG capture/playback
672 config VIDEO_ZORAN_AVS6EYES
673 tristate "AverMedia 6 Eyes support (EXPERIMENTAL)"
674 depends on VIDEO_ZORAN && EXPERIMENTAL && VIDEO_V4L1
675 select VIDEO_BT856 if VIDEO_HELPER_CHIPS_AUTO
676 select VIDEO_KS0127 if VIDEO_HELPER_CHIPS_AUTO
677 select VIDEO_ZORAN_ZR36060
679 Support for the AverMedia 6 Eyes video surveillance card.
682 tristate "Sony Vaio Picturebook Motion Eye Video For Linux"
683 depends on PCI && SONY_LAPTOP && VIDEO_V4L1
685 This is the video4linux driver for the Motion Eye camera found
686 in the Vaio Picturebook laptops. Please read the material in
687 <file:Documentation/video4linux/meye.txt> for more information.
689 If you say Y or M here, you need to say Y or M to "Sony Laptop
690 Extras" in the misc device section.
692 To compile this driver as a module, choose M here: the
693 module will be called meye.
695 source "drivers/media/video/saa7134/Kconfig"
698 tristate "Siemens-Nixdorf 'Multimedia eXtension Board'"
699 depends on PCI && VIDEO_V4L1 && I2C
700 select VIDEO_SAA7146_VV
702 select VIDEO_SAA7111 if VIDEO_HELPER_CHIPS_AUTO
703 select VIDEO_TDA9840 if VIDEO_HELPER_CHIPS_AUTO
704 select VIDEO_TEA6415C if VIDEO_HELPER_CHIPS_AUTO
705 select VIDEO_TEA6420 if VIDEO_HELPER_CHIPS_AUTO
707 This is a video4linux driver for the 'Multimedia eXtension Board'
708 TV card by Siemens-Nixdorf.
710 To compile this driver as a module, choose M here: the
711 module will be called mxb.
714 tristate "Philips-Semiconductors 'dpc7146 demonstration board'"
715 depends on PCI && VIDEO_V4L1 && I2C
716 select VIDEO_SAA7146_VV
717 select VIDEO_SAA7111 if VIDEO_HELPER_CHIPS_AUTO
719 This is a video4linux driver for the 'dpc7146 demonstration
720 board' by Philips-Semiconductors. It's the reference design
721 for SAA7146 bases boards, so if you have some unsupported
722 saa7146 based, analog video card, chances are good that it
723 will work with this skeleton driver.
725 To compile this driver as a module, choose M here: the
726 module will be called dpc7146.
728 config VIDEO_HEXIUM_ORION
729 tristate "Hexium HV-PCI6 and Orion frame grabber"
730 depends on PCI && VIDEO_V4L2 && I2C
731 select VIDEO_SAA7146_VV
733 This is a video4linux driver for the Hexium HV-PCI6 and
734 Orion frame grabber cards by Hexium.
736 To compile this driver as a module, choose M here: the
737 module will be called hexium_orion.
739 config VIDEO_HEXIUM_GEMINI
740 tristate "Hexium Gemini frame grabber"
741 depends on PCI && VIDEO_V4L2 && I2C
742 select VIDEO_SAA7146_VV
744 This is a video4linux driver for the Hexium Gemini frame
745 grabber card by Hexium. Please note that the Gemini Dual
746 card is *not* fully supported.
748 To compile this driver as a module, choose M here: the
749 module will be called hexium_gemini.
751 source "drivers/media/video/cx88/Kconfig"
753 source "drivers/media/video/cx23885/Kconfig"
755 source "drivers/media/video/au0828/Kconfig"
757 source "drivers/media/video/ivtv/Kconfig"
759 source drivers/media/video/omap/Kconfig
761 source "drivers/media/video/cx18/Kconfig"
764 tristate "AR devices"
765 depends on M32R && VIDEO_V4L1
767 This is a video4linux driver for the Renesas AR (Artificial Retina)
770 config VIDEO_M32R_AR_M64278
771 tristate "AR device with color module M64278(VGA)"
772 depends on PLAT_M32700UT
775 This is a video4linux driver for the Renesas AR (Artificial
776 Retina) with M64278E-800 camera module.
777 This module supports VGA(640x480 pixels) resolutions.
779 To compile this driver as a module, choose M here: the
780 module will be called arv.
782 config VIDEO_CAFE_CCIC
783 tristate "Marvell 88ALP01 (Cafe) CMOS Camera Controller support"
784 depends on PCI && I2C && VIDEO_V4L2
787 This is a video4linux2 driver for the Marvell 88ALP01 integrated
788 CMOS camera controller. This is the controller found on first-
789 generation OLPC systems.
792 tristate "OMAP 2 Camera support (EXPERIMENTAL)"
794 select VIDEOBUF_DMA_SG
795 depends on VIDEO_V4L2 && ARCH_OMAP24XX
797 Driver for an OMAP 2 camera controller.
801 # USB Multimedia device configuration
804 menuconfig V4L_USB_DRIVERS
805 bool "V4L USB devices"
809 if V4L_USB_DRIVERS && USB
811 source "drivers/media/video/pvrusb2/Kconfig"
813 source "drivers/media/video/em28xx/Kconfig"
815 source "drivers/media/video/usbvision/Kconfig"
817 source "drivers/media/video/usbvideo/Kconfig"
819 source "drivers/media/video/et61x251/Kconfig"
821 config VIDEO_OVCAMCHIP
822 tristate "OmniVision Camera Chip support"
823 depends on I2C && VIDEO_V4L1
825 Support for the OmniVision OV6xxx and OV7xxx series of camera chips.
826 This driver is intended to be used with the ov511 and w9968cf USB
829 To compile this driver as a module, choose M here: the
830 module will be called ovcamchip.
833 tristate "USB W996[87]CF JPEG Dual Mode Camera support"
834 depends on VIDEO_V4L1 && I2C
835 select VIDEO_OVCAMCHIP
837 Say Y here if you want support for cameras based on OV681 or
838 Winbond W9967CF/W9968CF JPEG USB Dual Mode Camera Chips.
840 This driver has an optional plugin, which is distributed as a
841 separate module only (released under GPL). It allows to use higher
842 resolutions and framerates, but cannot be included in the official
843 Linux kernel for performance purposes.
845 See <file:Documentation/video4linux/w9968cf.txt> for more info.
847 To compile this driver as a module, choose M here: the
848 module will be called w9968cf.
851 tristate "USB OV511 Camera support"
852 depends on VIDEO_V4L1
854 Say Y here if you want to connect this type of camera to your
855 computer's USB port. See <file:Documentation/video4linux/ov511.txt>
856 for more information and for a list of supported cameras.
858 To compile this driver as a module, choose M here: the
859 module will be called ov511.
862 tristate "USB SE401 Camera support"
863 depends on VIDEO_V4L1
865 Say Y here if you want to connect this type of camera to your
866 computer's USB port. See <file:Documentation/video4linux/se401.txt>
867 for more information and for a list of supported cameras.
869 To compile this driver as a module, choose M here: the
870 module will be called se401.
872 source "drivers/media/video/sn9c102/Kconfig"
875 tristate "USB STV680 (Pencam) Camera support"
876 depends on VIDEO_V4L1
878 Say Y here if you want to connect this type of camera to your
879 computer's USB port. This includes the Pencam line of cameras.
880 See <file:Documentation/video4linux/stv680.txt> for more information
881 and for a list of supported cameras.
883 To compile this driver as a module, choose M here: the
884 module will be called stv680.
886 source "drivers/media/video/zc0301/Kconfig"
888 source "drivers/media/video/pwc/Kconfig"
891 tristate "USB ZR364XX Camera support"
892 depends on VIDEO_V4L2
894 Say Y here if you want to connect this type of camera to your
896 See <file:Documentation/video4linux/zr364xx.txt> for more info
897 and list of supported cameras.
899 To compile this driver as a module, choose M here: the
900 module will be called zr364xx.
903 tristate "USB Syntek DC1125 Camera support"
904 depends on VIDEO_V4L2 && EXPERIMENTAL
906 Say Y here if you want to use this type of camera.
907 Supported devices are typically found in some Asus laptops,
908 with USB id 174f:a311 and 05e1:0501. Other Syntek cameras
909 may be supported by the stk11xx driver, from which this is
910 derived, see http://stk11xx.sourceforge.net
912 To compile this driver as a module, choose M here: the
913 module will be called stkwebcam.
915 endif # V4L_USB_DRIVERS
918 tristate "SoC camera support"
919 depends on VIDEO_V4L2
920 select VIDEOBUF_DMA_SG
922 SoC Camera is a common API to several cameras, not connecting
923 over a bus like PCI or USB. For example some i2c camera connected
924 directly to the data bus of an SoC.
926 config SOC_CAMERA_MT9M001
927 tristate "mt9m001 support"
928 depends on SOC_CAMERA
929 select GPIO_PCA953X if MT9M001_PCA9536_SWITCH
931 This driver supports MT9M001 cameras from Micron, monochrome
934 config MT9M001_PCA9536_SWITCH
935 bool "pca9536 datawidth switch for mt9m001"
936 depends on SOC_CAMERA_MT9M001 && GENERIC_GPIO
938 Select this if your MT9M001 camera uses a PCA9536 I2C GPIO
939 extender to switch between 8 and 10 bit datawidth modes
941 config SOC_CAMERA_MT9V022
942 tristate "mt9v022 support"
943 depends on SOC_CAMERA
944 select GPIO_PCA953X if MT9V022_PCA9536_SWITCH
946 This driver supports MT9V022 cameras from Micron
948 config MT9V022_PCA9536_SWITCH
949 bool "pca9536 datawidth switch for mt9v022"
950 depends on SOC_CAMERA_MT9V022 && GENERIC_GPIO
952 Select this if your MT9V022 camera uses a PCA9536 I2C GPIO
953 extender to switch between 8 and 10 bit datawidth modes
956 tristate "PXA27x Quick Capture Interface driver"
957 depends on VIDEO_DEV && PXA27x
960 This is a v4l2 driver for the PXA27x Quick Capture Interface
962 endif # VIDEO_CAPTURE_DRIVERS