]> www.pilppa.org Git - linux-2.6-omap-h63xx.git/blob - drivers/media/radio/radio-sf16fmr2.c
V4L/DVB (8776): radio: replace video_exclusive_open/release
[linux-2.6-omap-h63xx.git] / drivers / media / radio / radio-sf16fmr2.c
1 /* SF16FMR2 radio driver for Linux radio support
2  * heavily based on fmi driver...
3  * (c) 2000-2002 Ziglio Frediano, freddy77@angelfire.com
4  *
5  * Notes on the hardware
6  *
7  *  Frequency control is done digitally -- ie out(port,encodefreq(95.8));
8  *  No volume control - only mute/unmute - you have to use line volume
9  *
10  *  For read stereo/mono you must wait 0.1 sec after set frequency and
11  *  card unmuted so I set frequency on unmute
12  *  Signal handling seem to work only on autoscanning (not implemented)
13  *
14  *  Converted to V4L2 API by Mauro Carvalho Chehab <mchehab@infradead.org>
15  */
16
17 #include <linux/module.h>       /* Modules                      */
18 #include <linux/init.h>         /* Initdata                     */
19 #include <linux/ioport.h>       /* request_region               */
20 #include <linux/delay.h>        /* udelay                       */
21 #include <asm/io.h>             /* outb, outb_p                 */
22 #include <asm/uaccess.h>        /* copy to/from user            */
23 #include <linux/videodev2.h>    /* kernel radio structs         */
24 #include <media/v4l2-common.h>
25 #include <media/v4l2-ioctl.h>
26 #include <linux/mutex.h>
27
28 static struct mutex lock;
29
30 #include <linux/version.h>      /* for KERNEL_VERSION MACRO     */
31 #define RADIO_VERSION KERNEL_VERSION(0,0,2)
32
33 #define AUD_VOL_INDEX 1
34
35 static struct v4l2_queryctrl radio_qctrl[] = {
36         {
37                 .id            = V4L2_CID_AUDIO_MUTE,
38                 .name          = "Mute",
39                 .minimum       = 0,
40                 .maximum       = 1,
41                 .default_value = 1,
42                 .type          = V4L2_CTRL_TYPE_BOOLEAN,
43         },
44         [AUD_VOL_INDEX] = {
45                 .id            = V4L2_CID_AUDIO_VOLUME,
46                 .name          = "Volume",
47                 .minimum       = 0,
48                 .maximum       = 15,
49                 .step          = 1,
50                 .default_value = 0,
51                 .type          = V4L2_CTRL_TYPE_INTEGER,
52         }
53 };
54
55 #undef DEBUG
56 //#define DEBUG 1
57
58 #ifdef DEBUG
59 # define  debug_print(s) printk s
60 #else
61 # define  debug_print(s)
62 #endif
63
64 /* this should be static vars for module size */
65 struct fmr2_device
66 {
67         unsigned long in_use;
68         int port;
69         int curvol; /* 0-15 */
70         int mute;
71         int stereo; /* card is producing stereo audio */
72         unsigned long curfreq; /* freq in kHz */
73         int card_type;
74         __u32 flags;
75 };
76
77 static int io = 0x384;
78 static int radio_nr = -1;
79
80 /* hw precision is 12.5 kHz
81  * It is only useful to give freq in intervall of 200 (=0.0125Mhz),
82  * other bits will be truncated
83  */
84 #define RSF16_ENCODE(x) ((x)/200+856)
85 #define RSF16_MINFREQ 87*16000
86 #define RSF16_MAXFREQ 108*16000
87
88 static inline void wait(int n,int port)
89 {
90         for (;n;--n) inb(port);
91 }
92
93 static void outbits(int bits, unsigned int data, int nWait, int port)
94 {
95         int bit;
96         for(;--bits>=0;) {
97                 bit = (data>>bits) & 1;
98                 outb(bit,port);
99                 wait(nWait,port);
100                 outb(bit|2,port);
101                 wait(nWait,port);
102                 outb(bit,port);
103                 wait(nWait,port);
104         }
105 }
106
107 static inline void fmr2_mute(int port)
108 {
109         outb(0x00, port);
110         wait(4,port);
111 }
112
113 static inline void fmr2_unmute(int port)
114 {
115         outb(0x04, port);
116         wait(4,port);
117 }
118
119 static inline int fmr2_stereo_mode(int port)
120 {
121         int n = inb(port);
122         outb(6,port);
123         inb(port);
124         n = ((n>>3)&1)^1;
125         debug_print((KERN_DEBUG "stereo: %d\n", n));
126         return n;
127 }
128
129 static int fmr2_product_info(struct fmr2_device *dev)
130 {
131         int n = inb(dev->port);
132         n &= 0xC1;
133         if (n == 0)
134         {
135                 /* this should support volume set */
136                 dev->card_type = 12;
137                 return 0;
138         }
139         /* not volume (mine is 11) */
140         dev->card_type = (n==128)?11:0;
141         return n;
142 }
143
144 static inline int fmr2_getsigstr(struct fmr2_device *dev)
145 {
146         /* !!! work only if scanning freq */
147         int port = dev->port, res = 0xffff;
148         outb(5,port);
149         wait(4,port);
150         if (!(inb(port)&1)) res = 0;
151         debug_print((KERN_DEBUG "signal: %d\n", res));
152         return res;
153 }
154
155 /* set frequency and unmute card */
156 static int fmr2_setfreq(struct fmr2_device *dev)
157 {
158         int port = dev->port;
159         unsigned long freq = dev->curfreq;
160
161         fmr2_mute(port);
162
163         /* 0x42 for mono output
164          * 0x102 forward scanning
165          * 0x182 scansione avanti
166          */
167         outbits(9,0x2,3,port);
168         outbits(16,RSF16_ENCODE(freq),2,port);
169
170         fmr2_unmute(port);
171
172         /* wait 0.11 sec */
173         msleep(110);
174
175         /* NOTE if mute this stop radio
176            you must set freq on unmute */
177         dev->stereo = fmr2_stereo_mode(port);
178         return 0;
179 }
180
181 /* !!! not tested, in my card this does't work !!! */
182 static int fmr2_setvolume(struct fmr2_device *dev)
183 {
184         int vol[16] = { 0x021, 0x084, 0x090, 0x104,
185                         0x110, 0x204, 0x210, 0x402,
186                         0x404, 0x408, 0x410, 0x801,
187                         0x802, 0x804, 0x808, 0x810 };
188         int i, a, port = dev->port;
189         int n = vol[dev->curvol & 0x0f];
190
191         if (dev->card_type != 11)
192                 return 1;
193
194         for (i = 12; --i >= 0; ) {
195                 a = ((n >> i) & 1) << 6; /* if (a=0) a= 0; else a= 0x40; */
196                 outb(a | 4, port);
197                 wait(4, port);
198                 outb(a | 0x24, port);
199                 wait(4, port);
200                 outb(a | 4, port);
201                 wait(4, port);
202         }
203         for (i = 6; --i >= 0; ) {
204                 a = ((0x18 >> i) & 1) << 6;
205                 outb(a | 4, port);
206                 wait(4,port);
207                 outb(a | 0x24, port);
208                 wait(4,port);
209                 outb(a|4, port);
210                 wait(4,port);
211         }
212         wait(4, port);
213         outb(0x14, port);
214
215         return 0;
216 }
217
218 static int vidioc_querycap(struct file *file, void  *priv,
219                                         struct v4l2_capability *v)
220 {
221         strlcpy(v->driver, "radio-sf16fmr2", sizeof(v->driver));
222         strlcpy(v->card, "SF16-FMR2 radio", sizeof(v->card));
223         sprintf(v->bus_info, "ISA");
224         v->version = RADIO_VERSION;
225         v->capabilities = V4L2_CAP_TUNER;
226         return 0;
227 }
228
229 static int vidioc_g_tuner(struct file *file, void *priv,
230                                         struct v4l2_tuner *v)
231 {
232         int mult;
233         struct video_device *dev = video_devdata(file);
234         struct fmr2_device *fmr2 = dev->priv;
235
236         if (v->index > 0)
237                 return -EINVAL;
238
239         strcpy(v->name, "FM");
240         v->type = V4L2_TUNER_RADIO;
241
242         mult = (fmr2->flags & V4L2_TUNER_CAP_LOW) ? 1 : 1000;
243         v->rangelow = RSF16_MINFREQ/mult;
244         v->rangehigh = RSF16_MAXFREQ/mult;
245         v->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_MODE_STEREO;
246         v->capability = fmr2->flags&V4L2_TUNER_CAP_LOW;
247         v->audmode = fmr2->stereo ? V4L2_TUNER_MODE_STEREO:
248                                 V4L2_TUNER_MODE_MONO;
249         mutex_lock(&lock);
250         v->signal = fmr2_getsigstr(fmr2);
251         mutex_unlock(&lock);
252         return 0;
253 }
254
255 static int vidioc_s_tuner(struct file *file, void *priv,
256                                         struct v4l2_tuner *v)
257 {
258         if (v->index > 0)
259                 return -EINVAL;
260         return 0;
261 }
262
263 static int vidioc_s_frequency(struct file *file, void *priv,
264                                         struct v4l2_frequency *f)
265 {
266         struct video_device *dev = video_devdata(file);
267         struct fmr2_device *fmr2 = dev->priv;
268
269         if (!(fmr2->flags & V4L2_TUNER_CAP_LOW))
270                 f->frequency *= 1000;
271         if (f->frequency < RSF16_MINFREQ ||
272                         f->frequency > RSF16_MAXFREQ )
273                 return -EINVAL;
274         /*rounding in steps of 200 to match th freq
275         that will be used */
276         fmr2->curfreq = (f->frequency/200)*200;
277
278         /* set card freq (if not muted) */
279         if (fmr2->curvol && !fmr2->mute) {
280                 mutex_lock(&lock);
281                 fmr2_setfreq(fmr2);
282                 mutex_unlock(&lock);
283         }
284         return 0;
285 }
286
287 static int vidioc_g_frequency(struct file *file, void *priv,
288                                         struct v4l2_frequency *f)
289 {
290         struct video_device *dev = video_devdata(file);
291         struct fmr2_device *fmr2 = dev->priv;
292
293         f->type = V4L2_TUNER_RADIO;
294         f->frequency = fmr2->curfreq;
295         if (!(fmr2->flags & V4L2_TUNER_CAP_LOW))
296                 f->frequency /= 1000;
297         return 0;
298 }
299
300 static int vidioc_queryctrl(struct file *file, void *priv,
301                                         struct v4l2_queryctrl *qc)
302 {
303         int i;
304
305         for (i = 0; i < ARRAY_SIZE(radio_qctrl); i++) {
306                 if (qc->id && qc->id == radio_qctrl[i].id) {
307                         memcpy(qc, &radio_qctrl[i], sizeof(*qc));
308                         return 0;
309                 }
310         }
311         return -EINVAL;
312 }
313
314 static int vidioc_g_ctrl(struct file *file, void *priv,
315                                         struct v4l2_control *ctrl)
316 {
317         struct video_device *dev = video_devdata(file);
318         struct fmr2_device *fmr2 = dev->priv;
319
320         switch (ctrl->id) {
321         case V4L2_CID_AUDIO_MUTE:
322                 ctrl->value = fmr2->mute;
323                 return 0;
324         case V4L2_CID_AUDIO_VOLUME:
325                 ctrl->value = fmr2->curvol;
326                 return 0;
327         }
328         return -EINVAL;
329 }
330
331 static int vidioc_s_ctrl(struct file *file, void *priv,
332                                         struct v4l2_control *ctrl)
333 {
334         struct video_device *dev = video_devdata(file);
335         struct fmr2_device *fmr2 = dev->priv;
336
337         switch (ctrl->id) {
338         case V4L2_CID_AUDIO_MUTE:
339                 fmr2->mute = ctrl->value;
340                 break;
341         case V4L2_CID_AUDIO_VOLUME:
342                 if (ctrl->value > radio_qctrl[AUD_VOL_INDEX].maximum)
343                         fmr2->curvol = radio_qctrl[AUD_VOL_INDEX].maximum;
344                 else
345                         fmr2->curvol = ctrl->value;
346
347                 break;
348         default:
349                 return -EINVAL;
350         }
351
352 #ifdef DEBUG
353         if (fmr2->curvol && !fmr2->mute)
354                 printk(KERN_DEBUG "unmute\n");
355         else
356                 printk(KERN_DEBUG "mute\n");
357 #endif
358
359         mutex_lock(&lock);
360         if (fmr2->curvol && !fmr2->mute) {
361                 fmr2_setvolume(fmr2);
362                 /* Set frequency and unmute card */
363                 fmr2_setfreq(fmr2);
364         } else
365                 fmr2_mute(fmr2->port);
366         mutex_unlock(&lock);
367         return 0;
368 }
369
370 static int vidioc_g_audio(struct file *file, void *priv,
371                                         struct v4l2_audio *a)
372 {
373         if (a->index > 1)
374                 return -EINVAL;
375
376         strcpy(a->name, "Radio");
377         a->capability = V4L2_AUDCAP_STEREO;
378         return 0;
379 }
380
381 static int vidioc_g_input(struct file *filp, void *priv, unsigned int *i)
382 {
383         *i = 0;
384         return 0;
385 }
386
387 static int vidioc_s_input(struct file *filp, void *priv, unsigned int i)
388 {
389         if (i != 0)
390                 return -EINVAL;
391         return 0;
392 }
393
394 static int vidioc_s_audio(struct file *file, void *priv,
395                                         struct v4l2_audio *a)
396 {
397         if (a->index != 0)
398                 return -EINVAL;
399         return 0;
400 }
401
402 static struct fmr2_device fmr2_unit;
403
404 static int fmr2_exclusive_open(struct inode *inode, struct file *file)
405 {
406         return test_and_set_bit(0, &fmr2_unit.in_use) ? -EBUSY : 0;
407 }
408
409 static int fmr2_exclusive_release(struct inode *inode, struct file *file)
410 {
411         clear_bit(0, &fmr2_unit.in_use);
412         return 0;
413 }
414
415 static const struct file_operations fmr2_fops = {
416         .owner          = THIS_MODULE,
417         .open           = fmr2_exclusive_open,
418         .release        = fmr2_exclusive_release,
419         .ioctl          = video_ioctl2,
420 #ifdef CONFIG_COMPAT
421         .compat_ioctl   = v4l_compat_ioctl32,
422 #endif
423         .llseek         = no_llseek,
424 };
425
426 static const struct v4l2_ioctl_ops fmr2_ioctl_ops = {
427         .vidioc_querycap    = vidioc_querycap,
428         .vidioc_g_tuner     = vidioc_g_tuner,
429         .vidioc_s_tuner     = vidioc_s_tuner,
430         .vidioc_g_audio     = vidioc_g_audio,
431         .vidioc_s_audio     = vidioc_s_audio,
432         .vidioc_g_input     = vidioc_g_input,
433         .vidioc_s_input     = vidioc_s_input,
434         .vidioc_g_frequency = vidioc_g_frequency,
435         .vidioc_s_frequency = vidioc_s_frequency,
436         .vidioc_queryctrl   = vidioc_queryctrl,
437         .vidioc_g_ctrl      = vidioc_g_ctrl,
438         .vidioc_s_ctrl      = vidioc_s_ctrl,
439 };
440
441 static struct video_device fmr2_radio = {
442         .name           = "SF16FMR2 radio",
443         .fops           = &fmr2_fops,
444         .ioctl_ops      = &fmr2_ioctl_ops,
445 };
446
447 static int __init fmr2_init(void)
448 {
449         fmr2_unit.port = io;
450         fmr2_unit.curvol = 0;
451         fmr2_unit.mute = 0;
452         fmr2_unit.curfreq = 0;
453         fmr2_unit.stereo = 1;
454         fmr2_unit.flags = V4L2_TUNER_CAP_LOW;
455         fmr2_unit.card_type = 0;
456         fmr2_radio.priv = &fmr2_unit;
457
458         mutex_init(&lock);
459
460         if (!request_region(io, 2, "sf16fmr2")) {
461                 printk(KERN_ERR "radio-sf16fmr2: request_region failed!\n");
462                 return -EBUSY;
463         }
464
465         if (video_register_device(&fmr2_radio, VFL_TYPE_RADIO, radio_nr) < 0) {
466                 release_region(io, 2);
467                 return -EINVAL;
468         }
469
470         printk(KERN_INFO "SF16FMR2 radio card driver at 0x%x.\n", io);
471         /* mute card - prevents noisy bootups */
472         mutex_lock(&lock);
473         fmr2_mute(io);
474         fmr2_product_info(&fmr2_unit);
475         mutex_unlock(&lock);
476         debug_print((KERN_DEBUG "card_type %d\n", fmr2_unit.card_type));
477
478         /* Only card_type == 11 implements volume */
479         if (fmr2_unit.card_type != 11)
480                 radio_qctrl[AUD_VOL_INDEX].maximum = 1;
481
482         return 0;
483 }
484
485 MODULE_AUTHOR("Ziglio Frediano, freddy77@angelfire.com");
486 MODULE_DESCRIPTION("A driver for the SF16FMR2 radio.");
487 MODULE_LICENSE("GPL");
488
489 module_param(io, int, 0);
490 MODULE_PARM_DESC(io, "I/O address of the SF16FMR2 card (should be 0x384, if do not work try 0x284)");
491 module_param(radio_nr, int, 0);
492
493 static void __exit fmr2_cleanup_module(void)
494 {
495         video_unregister_device(&fmr2_radio);
496         release_region(io,2);
497 }
498
499 module_init(fmr2_init);
500 module_exit(fmr2_cleanup_module);
501
502 #ifndef MODULE
503
504 static int __init fmr2_setup_io(char *str)
505 {
506         get_option(&str, &io);
507         return 1;
508 }
509
510 __setup("sf16fmr2=", fmr2_setup_io);
511
512 #endif