]> www.pilppa.org Git - linux-2.6-omap-h63xx.git/blob - drivers/ide/pci/aec62xx.c
bed32d0eaa3722ae479f1d4d334e6742803b41cd
[linux-2.6-omap-h63xx.git] / drivers / ide / pci / aec62xx.c
1 /*
2  * linux/drivers/ide/pci/aec62xx.c              Version 0.21    Apr 21, 2007
3  *
4  * Copyright (C) 1999-2002      Andre Hedrick <andre@linux-ide.org>
5  * Copyright (C) 2007           MontaVista Software, Inc. <source@mvista.com>
6  *
7  */
8
9 #include <linux/module.h>
10 #include <linux/types.h>
11 #include <linux/pci.h>
12 #include <linux/delay.h>
13 #include <linux/hdreg.h>
14 #include <linux/ide.h>
15 #include <linux/init.h>
16
17 #include <asm/io.h>
18
19 struct chipset_bus_clock_list_entry {
20         u8 xfer_speed;
21         u8 chipset_settings;
22         u8 ultra_settings;
23 };
24
25 static const struct chipset_bus_clock_list_entry aec6xxx_33_base [] = {
26         {       XFER_UDMA_6,    0x31,   0x07    },
27         {       XFER_UDMA_5,    0x31,   0x06    },
28         {       XFER_UDMA_4,    0x31,   0x05    },
29         {       XFER_UDMA_3,    0x31,   0x04    },
30         {       XFER_UDMA_2,    0x31,   0x03    },
31         {       XFER_UDMA_1,    0x31,   0x02    },
32         {       XFER_UDMA_0,    0x31,   0x01    },
33
34         {       XFER_MW_DMA_2,  0x31,   0x00    },
35         {       XFER_MW_DMA_1,  0x31,   0x00    },
36         {       XFER_MW_DMA_0,  0x0a,   0x00    },
37         {       XFER_PIO_4,     0x31,   0x00    },
38         {       XFER_PIO_3,     0x33,   0x00    },
39         {       XFER_PIO_2,     0x08,   0x00    },
40         {       XFER_PIO_1,     0x0a,   0x00    },
41         {       XFER_PIO_0,     0x00,   0x00    },
42         {       0,              0x00,   0x00    }
43 };
44
45 static const struct chipset_bus_clock_list_entry aec6xxx_34_base [] = {
46         {       XFER_UDMA_6,    0x41,   0x06    },
47         {       XFER_UDMA_5,    0x41,   0x05    },
48         {       XFER_UDMA_4,    0x41,   0x04    },
49         {       XFER_UDMA_3,    0x41,   0x03    },
50         {       XFER_UDMA_2,    0x41,   0x02    },
51         {       XFER_UDMA_1,    0x41,   0x01    },
52         {       XFER_UDMA_0,    0x41,   0x01    },
53
54         {       XFER_MW_DMA_2,  0x41,   0x00    },
55         {       XFER_MW_DMA_1,  0x42,   0x00    },
56         {       XFER_MW_DMA_0,  0x7a,   0x00    },
57         {       XFER_PIO_4,     0x41,   0x00    },
58         {       XFER_PIO_3,     0x43,   0x00    },
59         {       XFER_PIO_2,     0x78,   0x00    },
60         {       XFER_PIO_1,     0x7a,   0x00    },
61         {       XFER_PIO_0,     0x70,   0x00    },
62         {       0,              0x00,   0x00    }
63 };
64
65 #define BUSCLOCK(D)     \
66         ((struct chipset_bus_clock_list_entry *) pci_get_drvdata((D)))
67
68
69 /*
70  * TO DO: active tuning and correction of cards without a bios.
71  */
72 static u8 pci_bus_clock_list (u8 speed, struct chipset_bus_clock_list_entry * chipset_table)
73 {
74         for ( ; chipset_table->xfer_speed ; chipset_table++)
75                 if (chipset_table->xfer_speed == speed) {
76                         return chipset_table->chipset_settings;
77                 }
78         return chipset_table->chipset_settings;
79 }
80
81 static u8 pci_bus_clock_list_ultra (u8 speed, struct chipset_bus_clock_list_entry * chipset_table)
82 {
83         for ( ; chipset_table->xfer_speed ; chipset_table++)
84                 if (chipset_table->xfer_speed == speed) {
85                         return chipset_table->ultra_settings;
86                 }
87         return chipset_table->ultra_settings;
88 }
89
90 static int aec6210_tune_chipset (ide_drive_t *drive, u8 xferspeed)
91 {
92         ide_hwif_t *hwif        = HWIF(drive);
93         struct pci_dev *dev     = hwif->pci_dev;
94         u16 d_conf              = 0;
95         u8 speed                = ide_rate_filter(drive, xferspeed);
96         u8 ultra = 0, ultra_conf = 0;
97         u8 tmp0 = 0, tmp1 = 0, tmp2 = 0;
98         unsigned long flags;
99
100         local_irq_save(flags);
101         /* 0x40|(2*drive->dn): Active, 0x41|(2*drive->dn): Recovery */
102         pci_read_config_word(dev, 0x40|(2*drive->dn), &d_conf);
103         tmp0 = pci_bus_clock_list(speed, BUSCLOCK(dev));
104         d_conf = ((tmp0 & 0xf0) << 4) | (tmp0 & 0xf);
105         pci_write_config_word(dev, 0x40|(2*drive->dn), d_conf);
106
107         tmp1 = 0x00;
108         tmp2 = 0x00;
109         pci_read_config_byte(dev, 0x54, &ultra);
110         tmp1 = ((0x00 << (2*drive->dn)) | (ultra & ~(3 << (2*drive->dn))));
111         ultra_conf = pci_bus_clock_list_ultra(speed, BUSCLOCK(dev));
112         tmp2 = ((ultra_conf << (2*drive->dn)) | (tmp1 & ~(3 << (2*drive->dn))));
113         pci_write_config_byte(dev, 0x54, tmp2);
114         local_irq_restore(flags);
115         return(ide_config_drive_speed(drive, speed));
116 }
117
118 static int aec6260_tune_chipset (ide_drive_t *drive, u8 xferspeed)
119 {
120         ide_hwif_t *hwif        = HWIF(drive);
121         struct pci_dev *dev     = hwif->pci_dev;
122         u8 speed        = ide_rate_filter(drive, xferspeed);
123         u8 unit         = (drive->select.b.unit & 0x01);
124         u8 tmp1 = 0, tmp2 = 0;
125         u8 ultra = 0, drive_conf = 0, ultra_conf = 0;
126         unsigned long flags;
127
128         local_irq_save(flags);
129         /* high 4-bits: Active, low 4-bits: Recovery */
130         pci_read_config_byte(dev, 0x40|drive->dn, &drive_conf);
131         drive_conf = pci_bus_clock_list(speed, BUSCLOCK(dev));
132         pci_write_config_byte(dev, 0x40|drive->dn, drive_conf);
133
134         pci_read_config_byte(dev, (0x44|hwif->channel), &ultra);
135         tmp1 = ((0x00 << (4*unit)) | (ultra & ~(7 << (4*unit))));
136         ultra_conf = pci_bus_clock_list_ultra(speed, BUSCLOCK(dev));
137         tmp2 = ((ultra_conf << (4*unit)) | (tmp1 & ~(7 << (4*unit))));
138         pci_write_config_byte(dev, (0x44|hwif->channel), tmp2);
139         local_irq_restore(flags);
140         return(ide_config_drive_speed(drive, speed));
141 }
142
143 static int aec62xx_tune_chipset (ide_drive_t *drive, u8 speed)
144 {
145         switch (HWIF(drive)->pci_dev->device) {
146                 case PCI_DEVICE_ID_ARTOP_ATP865:
147                 case PCI_DEVICE_ID_ARTOP_ATP865R:
148                 case PCI_DEVICE_ID_ARTOP_ATP860:
149                 case PCI_DEVICE_ID_ARTOP_ATP860R:
150                         return ((int) aec6260_tune_chipset(drive, speed));
151                 case PCI_DEVICE_ID_ARTOP_ATP850UF:
152                         return ((int) aec6210_tune_chipset(drive, speed));
153                 default:
154                         return -1;
155         }
156 }
157
158 static void aec62xx_tune_drive (ide_drive_t *drive, u8 pio)
159 {
160         pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
161         (void) aec62xx_tune_chipset(drive, pio + XFER_PIO_0);
162 }
163
164 static int aec62xx_config_drive_xfer_rate (ide_drive_t *drive)
165 {
166         if (ide_tune_dma(drive))
167                 return 0;
168
169         if (ide_use_fast_pio(drive))
170                 aec62xx_tune_drive(drive, 255);
171
172         return -1;
173 }
174
175 static void aec62xx_dma_lost_irq (ide_drive_t *drive)
176 {
177         switch (HWIF(drive)->pci_dev->device) {
178                 case PCI_DEVICE_ID_ARTOP_ATP860:
179                 case PCI_DEVICE_ID_ARTOP_ATP860R:
180                 case PCI_DEVICE_ID_ARTOP_ATP865:
181                 case PCI_DEVICE_ID_ARTOP_ATP865R:
182                         printk(" AEC62XX time out ");
183                 default:
184                         break;
185         }
186 }
187
188 static unsigned int __devinit init_chipset_aec62xx(struct pci_dev *dev, const char *name)
189 {
190         int bus_speed = system_bus_clock();
191
192         if (dev->resource[PCI_ROM_RESOURCE].start) {
193                 pci_write_config_dword(dev, PCI_ROM_ADDRESS, dev->resource[PCI_ROM_RESOURCE].start | PCI_ROM_ADDRESS_ENABLE);
194                 printk(KERN_INFO "%s: ROM enabled at 0x%08lx\n", name,
195                         (unsigned long)dev->resource[PCI_ROM_RESOURCE].start);
196         }
197
198         if (bus_speed <= 33)
199                 pci_set_drvdata(dev, (void *) aec6xxx_33_base);
200         else
201                 pci_set_drvdata(dev, (void *) aec6xxx_34_base);
202
203         /* These are necessary to get AEC6280 Macintosh cards to work */
204         if ((dev->device == PCI_DEVICE_ID_ARTOP_ATP865) ||
205             (dev->device == PCI_DEVICE_ID_ARTOP_ATP865R)) {
206                 u8 reg49h = 0, reg4ah = 0;
207                 /* Clear reset and test bits.  */
208                 pci_read_config_byte(dev, 0x49, &reg49h);
209                 pci_write_config_byte(dev, 0x49, reg49h & ~0x30);
210                 /* Enable chip interrupt output.  */
211                 pci_read_config_byte(dev, 0x4a, &reg4ah);
212                 pci_write_config_byte(dev, 0x4a, reg4ah & ~0x01);
213                 /* Enable burst mode. */
214                 pci_read_config_byte(dev, 0x4a, &reg4ah);
215                 pci_write_config_byte(dev, 0x4a, reg4ah | 0x80);
216         }
217
218         return dev->irq;
219 }
220
221 static void __devinit init_hwif_aec62xx(ide_hwif_t *hwif)
222 {
223         struct pci_dev *dev = hwif->pci_dev;
224
225         hwif->autodma = 0;
226         hwif->tuneproc = &aec62xx_tune_drive;
227         hwif->speedproc = &aec62xx_tune_chipset;
228
229         if (dev->device == PCI_DEVICE_ID_ARTOP_ATP850UF)
230                 hwif->serialized = hwif->channel;
231
232         if (hwif->mate)
233                 hwif->mate->serialized = hwif->serialized;
234
235         if (!hwif->dma_base) {
236                 hwif->drives[0].autotune = 1;
237                 hwif->drives[1].autotune = 1;
238                 return;
239         }
240
241         hwif->ultra_mask = hwif->cds->udma_mask;
242
243         /* atp865 and atp865r */
244         if (hwif->ultra_mask == 0x3f) {
245                 /* check bit 0x10 of DMA status register */
246                 if (inb(pci_resource_start(dev, 4) + 2) & 0x10)
247                         hwif->ultra_mask = 0x7f; /* udma0-6 */
248         }
249
250         hwif->mwdma_mask = 0x07;
251
252         hwif->ide_dma_check     = &aec62xx_config_drive_xfer_rate;
253         hwif->dma_lost_irq      = &aec62xx_dma_lost_irq;
254
255         if (!noautodma)
256                 hwif->autodma = 1;
257         hwif->drives[0].autodma = hwif->autodma;
258         hwif->drives[1].autodma = hwif->autodma;
259 }
260
261 static void __devinit init_dma_aec62xx(ide_hwif_t *hwif, unsigned long dmabase)
262 {
263         struct pci_dev *dev     = hwif->pci_dev;
264
265         if (dev->device == PCI_DEVICE_ID_ARTOP_ATP850UF) {
266                 u8 reg54h = 0;
267                 unsigned long flags;
268
269                 spin_lock_irqsave(&ide_lock, flags);
270                 pci_read_config_byte(dev, 0x54, &reg54h);
271                 pci_write_config_byte(dev, 0x54, reg54h & ~(hwif->channel ? 0xF0 : 0x0F));
272                 spin_unlock_irqrestore(&ide_lock, flags);
273         } else {
274                 u8 ata66        = 0;
275                 pci_read_config_byte(hwif->pci_dev, 0x49, &ata66);
276                 if (!(hwif->udma_four))
277                         hwif->udma_four = (ata66&(hwif->channel?0x02:0x01))?0:1;
278         }
279
280         ide_setup_dma(hwif, dmabase, 8);
281 }
282
283 static int __devinit init_setup_aec62xx(struct pci_dev *dev, ide_pci_device_t *d)
284 {
285         return ide_setup_pci_device(dev, d);
286 }
287
288 static int __devinit init_setup_aec6x80(struct pci_dev *dev, ide_pci_device_t *d)
289 {
290         unsigned long bar4reg = pci_resource_start(dev, 4);
291
292         if (inb(bar4reg+2) & 0x10) {
293                 strcpy(d->name, "AEC6880");
294                 if (dev->device == PCI_DEVICE_ID_ARTOP_ATP865R)
295                         strcpy(d->name, "AEC6880R");
296         } else {
297                 strcpy(d->name, "AEC6280");
298                 if (dev->device == PCI_DEVICE_ID_ARTOP_ATP865R)
299                         strcpy(d->name, "AEC6280R");
300         }
301
302         return ide_setup_pci_device(dev, d);
303 }
304
305 static ide_pci_device_t aec62xx_chipsets[] __devinitdata = {
306         {       /* 0 */
307                 .name           = "AEC6210",
308                 .init_setup     = init_setup_aec62xx,
309                 .init_chipset   = init_chipset_aec62xx,
310                 .init_hwif      = init_hwif_aec62xx,
311                 .init_dma       = init_dma_aec62xx,
312                 .channels       = 2,
313                 .autodma        = AUTODMA,
314                 .enablebits     = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}},
315                 .bootable       = OFF_BOARD,
316                 .udma_mask      = 0x07, /* udma0-2 */
317         },{     /* 1 */
318                 .name           = "AEC6260",
319                 .init_setup     = init_setup_aec62xx,
320                 .init_chipset   = init_chipset_aec62xx,
321                 .init_hwif      = init_hwif_aec62xx,
322                 .init_dma       = init_dma_aec62xx,
323                 .channels       = 2,
324                 .autodma        = NOAUTODMA,
325                 .bootable       = OFF_BOARD,
326                 .udma_mask      = 0x1f, /* udma0-4 */
327         },{     /* 2 */
328                 .name           = "AEC6260R",
329                 .init_setup     = init_setup_aec62xx,
330                 .init_chipset   = init_chipset_aec62xx,
331                 .init_hwif      = init_hwif_aec62xx,
332                 .init_dma       = init_dma_aec62xx,
333                 .channels       = 2,
334                 .autodma        = AUTODMA,
335                 .enablebits     = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}},
336                 .bootable       = NEVER_BOARD,
337                 .udma_mask      = 0x1f, /* udma0-4 */
338         },{     /* 3 */
339                 .name           = "AEC6X80",
340                 .init_setup     = init_setup_aec6x80,
341                 .init_chipset   = init_chipset_aec62xx,
342                 .init_hwif      = init_hwif_aec62xx,
343                 .init_dma       = init_dma_aec62xx,
344                 .channels       = 2,
345                 .autodma        = AUTODMA,
346                 .bootable       = OFF_BOARD,
347                 .udma_mask      = 0x3f, /* udma0-5 */
348         },{     /* 4 */
349                 .name           = "AEC6X80R",
350                 .init_setup     = init_setup_aec6x80,
351                 .init_chipset   = init_chipset_aec62xx,
352                 .init_hwif      = init_hwif_aec62xx,
353                 .init_dma       = init_dma_aec62xx,
354                 .channels       = 2,
355                 .autodma        = AUTODMA,
356                 .enablebits     = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}},
357                 .bootable       = OFF_BOARD,
358                 .udma_mask      = 0x3f, /* udma0-5 */
359         }
360 };
361
362 /**
363  *      aec62xx_init_one        -       called when a AEC is found
364  *      @dev: the aec62xx device
365  *      @id: the matching pci id
366  *
367  *      Called when the PCI registration layer (or the IDE initialization)
368  *      finds a device matching our IDE device tables.
369  */
370  
371 static int __devinit aec62xx_init_one(struct pci_dev *dev, const struct pci_device_id *id)
372 {
373         ide_pci_device_t *d = &aec62xx_chipsets[id->driver_data];
374
375         return d->init_setup(dev, d);
376 }
377
378 static struct pci_device_id aec62xx_pci_tbl[] = {
379         { PCI_VENDOR_ID_ARTOP, PCI_DEVICE_ID_ARTOP_ATP850UF, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
380         { PCI_VENDOR_ID_ARTOP, PCI_DEVICE_ID_ARTOP_ATP860,   PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1 },
381         { PCI_VENDOR_ID_ARTOP, PCI_DEVICE_ID_ARTOP_ATP860R,  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2 },
382         { PCI_VENDOR_ID_ARTOP, PCI_DEVICE_ID_ARTOP_ATP865,   PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3 },
383         { PCI_VENDOR_ID_ARTOP, PCI_DEVICE_ID_ARTOP_ATP865R,  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4 },
384         { 0, },
385 };
386 MODULE_DEVICE_TABLE(pci, aec62xx_pci_tbl);
387
388 static struct pci_driver driver = {
389         .name           = "AEC62xx_IDE",
390         .id_table       = aec62xx_pci_tbl,
391         .probe          = aec62xx_init_one,
392 };
393
394 static int __init aec62xx_ide_init(void)
395 {
396         return ide_pci_register_driver(&driver);
397 }
398
399 module_init(aec62xx_ide_init);
400
401 MODULE_AUTHOR("Andre Hedrick");
402 MODULE_DESCRIPTION("PCI driver module for ARTOP AEC62xx IDE");
403 MODULE_LICENSE("GPL");