]> www.pilppa.org Git - linux-2.6-omap-h63xx.git/blob - drivers/ide/pci/aec62xx.c
aec62xx: fix PIO/DMA setup issues
[linux-2.6-omap-h63xx.git] / drivers / ide / pci / aec62xx.c
1 /*
2  * linux/drivers/ide/pci/aec62xx.c              Version 0.21    Apr 21, 2007
3  *
4  * Copyright (C) 1999-2002      Andre Hedrick <andre@linux-ide.org>
5  * Copyright (C) 2007           MontaVista Software, Inc. <source@mvista.com>
6  *
7  */
8
9 #include <linux/module.h>
10 #include <linux/types.h>
11 #include <linux/pci.h>
12 #include <linux/delay.h>
13 #include <linux/hdreg.h>
14 #include <linux/ide.h>
15 #include <linux/init.h>
16
17 #include <asm/io.h>
18
19 struct chipset_bus_clock_list_entry {
20         u8 xfer_speed;
21         u8 chipset_settings;
22         u8 ultra_settings;
23 };
24
25 static const struct chipset_bus_clock_list_entry aec6xxx_33_base [] = {
26         {       XFER_UDMA_6,    0x31,   0x07    },
27         {       XFER_UDMA_5,    0x31,   0x06    },
28         {       XFER_UDMA_4,    0x31,   0x05    },
29         {       XFER_UDMA_3,    0x31,   0x04    },
30         {       XFER_UDMA_2,    0x31,   0x03    },
31         {       XFER_UDMA_1,    0x31,   0x02    },
32         {       XFER_UDMA_0,    0x31,   0x01    },
33
34         {       XFER_MW_DMA_2,  0x31,   0x00    },
35         {       XFER_MW_DMA_1,  0x31,   0x00    },
36         {       XFER_MW_DMA_0,  0x0a,   0x00    },
37         {       XFER_PIO_4,     0x31,   0x00    },
38         {       XFER_PIO_3,     0x33,   0x00    },
39         {       XFER_PIO_2,     0x08,   0x00    },
40         {       XFER_PIO_1,     0x0a,   0x00    },
41         {       XFER_PIO_0,     0x00,   0x00    },
42         {       0,              0x00,   0x00    }
43 };
44
45 static const struct chipset_bus_clock_list_entry aec6xxx_34_base [] = {
46         {       XFER_UDMA_6,    0x41,   0x06    },
47         {       XFER_UDMA_5,    0x41,   0x05    },
48         {       XFER_UDMA_4,    0x41,   0x04    },
49         {       XFER_UDMA_3,    0x41,   0x03    },
50         {       XFER_UDMA_2,    0x41,   0x02    },
51         {       XFER_UDMA_1,    0x41,   0x01    },
52         {       XFER_UDMA_0,    0x41,   0x01    },
53
54         {       XFER_MW_DMA_2,  0x41,   0x00    },
55         {       XFER_MW_DMA_1,  0x42,   0x00    },
56         {       XFER_MW_DMA_0,  0x7a,   0x00    },
57         {       XFER_PIO_4,     0x41,   0x00    },
58         {       XFER_PIO_3,     0x43,   0x00    },
59         {       XFER_PIO_2,     0x78,   0x00    },
60         {       XFER_PIO_1,     0x7a,   0x00    },
61         {       XFER_PIO_0,     0x70,   0x00    },
62         {       0,              0x00,   0x00    }
63 };
64
65 #define BUSCLOCK(D)     \
66         ((struct chipset_bus_clock_list_entry *) pci_get_drvdata((D)))
67
68
69 /*
70  * TO DO: active tuning and correction of cards without a bios.
71  */
72 static u8 pci_bus_clock_list (u8 speed, struct chipset_bus_clock_list_entry * chipset_table)
73 {
74         for ( ; chipset_table->xfer_speed ; chipset_table++)
75                 if (chipset_table->xfer_speed == speed) {
76                         return chipset_table->chipset_settings;
77                 }
78         return chipset_table->chipset_settings;
79 }
80
81 static u8 pci_bus_clock_list_ultra (u8 speed, struct chipset_bus_clock_list_entry * chipset_table)
82 {
83         for ( ; chipset_table->xfer_speed ; chipset_table++)
84                 if (chipset_table->xfer_speed == speed) {
85                         return chipset_table->ultra_settings;
86                 }
87         return chipset_table->ultra_settings;
88 }
89
90 static u8 aec62xx_ratemask (ide_drive_t *drive)
91 {
92         ide_hwif_t *hwif        = HWIF(drive);
93         u8 mode;
94
95         switch(hwif->pci_dev->device) {
96                 case PCI_DEVICE_ID_ARTOP_ATP865:
97                 case PCI_DEVICE_ID_ARTOP_ATP865R:
98                         mode = (inb(hwif->channel ?
99                                     hwif->mate->dma_status :
100                                     hwif->dma_status) & 0x10) ? 4 : 3;
101                         break;
102                 case PCI_DEVICE_ID_ARTOP_ATP860:
103                 case PCI_DEVICE_ID_ARTOP_ATP860R:
104                         mode = 2;
105                         break;
106                 case PCI_DEVICE_ID_ARTOP_ATP850UF:
107                 default:
108                         return 1;
109         }
110
111         if (!eighty_ninty_three(drive))
112                 mode = min(mode, (u8)1);
113         return mode;
114 }
115
116 static int aec6210_tune_chipset (ide_drive_t *drive, u8 xferspeed)
117 {
118         ide_hwif_t *hwif        = HWIF(drive);
119         struct pci_dev *dev     = hwif->pci_dev;
120         u16 d_conf              = 0;
121         u8 speed        = ide_rate_filter(aec62xx_ratemask(drive), xferspeed);
122         u8 ultra = 0, ultra_conf = 0;
123         u8 tmp0 = 0, tmp1 = 0, tmp2 = 0;
124         unsigned long flags;
125
126         local_irq_save(flags);
127         /* 0x40|(2*drive->dn): Active, 0x41|(2*drive->dn): Recovery */
128         pci_read_config_word(dev, 0x40|(2*drive->dn), &d_conf);
129         tmp0 = pci_bus_clock_list(speed, BUSCLOCK(dev));
130         d_conf = ((tmp0 & 0xf0) << 4) | (tmp0 & 0xf);
131         pci_write_config_word(dev, 0x40|(2*drive->dn), d_conf);
132
133         tmp1 = 0x00;
134         tmp2 = 0x00;
135         pci_read_config_byte(dev, 0x54, &ultra);
136         tmp1 = ((0x00 << (2*drive->dn)) | (ultra & ~(3 << (2*drive->dn))));
137         ultra_conf = pci_bus_clock_list_ultra(speed, BUSCLOCK(dev));
138         tmp2 = ((ultra_conf << (2*drive->dn)) | (tmp1 & ~(3 << (2*drive->dn))));
139         pci_write_config_byte(dev, 0x54, tmp2);
140         local_irq_restore(flags);
141         return(ide_config_drive_speed(drive, speed));
142 }
143
144 static int aec6260_tune_chipset (ide_drive_t *drive, u8 xferspeed)
145 {
146         ide_hwif_t *hwif        = HWIF(drive);
147         struct pci_dev *dev     = hwif->pci_dev;
148         u8 speed        = ide_rate_filter(aec62xx_ratemask(drive), xferspeed);
149         u8 unit         = (drive->select.b.unit & 0x01);
150         u8 tmp1 = 0, tmp2 = 0;
151         u8 ultra = 0, drive_conf = 0, ultra_conf = 0;
152         unsigned long flags;
153
154         local_irq_save(flags);
155         /* high 4-bits: Active, low 4-bits: Recovery */
156         pci_read_config_byte(dev, 0x40|drive->dn, &drive_conf);
157         drive_conf = pci_bus_clock_list(speed, BUSCLOCK(dev));
158         pci_write_config_byte(dev, 0x40|drive->dn, drive_conf);
159
160         pci_read_config_byte(dev, (0x44|hwif->channel), &ultra);
161         tmp1 = ((0x00 << (4*unit)) | (ultra & ~(7 << (4*unit))));
162         ultra_conf = pci_bus_clock_list_ultra(speed, BUSCLOCK(dev));
163         tmp2 = ((ultra_conf << (4*unit)) | (tmp1 & ~(7 << (4*unit))));
164         pci_write_config_byte(dev, (0x44|hwif->channel), tmp2);
165         local_irq_restore(flags);
166         return(ide_config_drive_speed(drive, speed));
167 }
168
169 static int aec62xx_tune_chipset (ide_drive_t *drive, u8 speed)
170 {
171         switch (HWIF(drive)->pci_dev->device) {
172                 case PCI_DEVICE_ID_ARTOP_ATP865:
173                 case PCI_DEVICE_ID_ARTOP_ATP865R:
174                 case PCI_DEVICE_ID_ARTOP_ATP860:
175                 case PCI_DEVICE_ID_ARTOP_ATP860R:
176                         return ((int) aec6260_tune_chipset(drive, speed));
177                 case PCI_DEVICE_ID_ARTOP_ATP850UF:
178                         return ((int) aec6210_tune_chipset(drive, speed));
179                 default:
180                         return -1;
181         }
182 }
183
184 static int config_chipset_for_dma (ide_drive_t *drive)
185 {
186         u8 speed = ide_dma_speed(drive, aec62xx_ratemask(drive));       
187
188         if (!(speed))
189                 return 0;
190
191         (void) aec62xx_tune_chipset(drive, speed);
192         return ide_dma_enable(drive);
193 }
194
195 static void aec62xx_tune_drive (ide_drive_t *drive, u8 pio)
196 {
197         pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
198         (void) aec62xx_tune_chipset(drive, pio + XFER_PIO_0);
199 }
200
201 static int aec62xx_config_drive_xfer_rate (ide_drive_t *drive)
202 {
203         if (ide_use_dma(drive) && config_chipset_for_dma(drive))
204                 return 0;
205
206         if (ide_use_fast_pio(drive))
207                 aec62xx_tune_drive(drive, 255);
208
209         return -1;
210 }
211
212 static int aec62xx_irq_timeout (ide_drive_t *drive)
213 {
214         ide_hwif_t *hwif        = HWIF(drive);
215         struct pci_dev *dev     = hwif->pci_dev;
216
217         switch(dev->device) {
218                 case PCI_DEVICE_ID_ARTOP_ATP860:
219                 case PCI_DEVICE_ID_ARTOP_ATP860R:
220                 case PCI_DEVICE_ID_ARTOP_ATP865:
221                 case PCI_DEVICE_ID_ARTOP_ATP865R:
222                         printk(" AEC62XX time out ");
223                 default:
224                         break;
225         }
226         return 0;
227 }
228
229 static unsigned int __devinit init_chipset_aec62xx(struct pci_dev *dev, const char *name)
230 {
231         int bus_speed = system_bus_clock();
232
233         if (dev->resource[PCI_ROM_RESOURCE].start) {
234                 pci_write_config_dword(dev, PCI_ROM_ADDRESS, dev->resource[PCI_ROM_RESOURCE].start | PCI_ROM_ADDRESS_ENABLE);
235                 printk(KERN_INFO "%s: ROM enabled at 0x%08lx\n", name,
236                         (unsigned long)dev->resource[PCI_ROM_RESOURCE].start);
237         }
238
239         if (bus_speed <= 33)
240                 pci_set_drvdata(dev, (void *) aec6xxx_33_base);
241         else
242                 pci_set_drvdata(dev, (void *) aec6xxx_34_base);
243
244         /* These are necessary to get AEC6280 Macintosh cards to work */
245         if ((dev->device == PCI_DEVICE_ID_ARTOP_ATP865) ||
246             (dev->device == PCI_DEVICE_ID_ARTOP_ATP865R)) {
247                 u8 reg49h = 0, reg4ah = 0;
248                 /* Clear reset and test bits.  */
249                 pci_read_config_byte(dev, 0x49, &reg49h);
250                 pci_write_config_byte(dev, 0x49, reg49h & ~0x30);
251                 /* Enable chip interrupt output.  */
252                 pci_read_config_byte(dev, 0x4a, &reg4ah);
253                 pci_write_config_byte(dev, 0x4a, reg4ah & ~0x01);
254                 /* Enable burst mode. */
255                 pci_read_config_byte(dev, 0x4a, &reg4ah);
256                 pci_write_config_byte(dev, 0x4a, reg4ah | 0x80);
257         }
258
259         return dev->irq;
260 }
261
262 static void __devinit init_hwif_aec62xx(ide_hwif_t *hwif)
263 {
264         hwif->autodma = 0;
265         hwif->tuneproc = &aec62xx_tune_drive;
266         hwif->speedproc = &aec62xx_tune_chipset;
267
268         if (hwif->pci_dev->device == PCI_DEVICE_ID_ARTOP_ATP850UF)
269                 hwif->serialized = hwif->channel;
270
271         if (hwif->mate)
272                 hwif->mate->serialized = hwif->serialized;
273
274         if (!hwif->dma_base) {
275                 hwif->drives[0].autotune = 1;
276                 hwif->drives[1].autotune = 1;
277                 return;
278         }
279
280         hwif->ultra_mask = 0x7f;
281         hwif->mwdma_mask = 0x07;
282
283         hwif->ide_dma_check     = &aec62xx_config_drive_xfer_rate;
284         hwif->ide_dma_lostirq   = &aec62xx_irq_timeout;
285
286         if (!noautodma)
287                 hwif->autodma = 1;
288         hwif->drives[0].autodma = hwif->autodma;
289         hwif->drives[1].autodma = hwif->autodma;
290 }
291
292 static void __devinit init_dma_aec62xx(ide_hwif_t *hwif, unsigned long dmabase)
293 {
294         struct pci_dev *dev     = hwif->pci_dev;
295
296         if (dev->device == PCI_DEVICE_ID_ARTOP_ATP850UF) {
297                 u8 reg54h = 0;
298                 unsigned long flags;
299
300                 spin_lock_irqsave(&ide_lock, flags);
301                 pci_read_config_byte(dev, 0x54, &reg54h);
302                 pci_write_config_byte(dev, 0x54, reg54h & ~(hwif->channel ? 0xF0 : 0x0F));
303                 spin_unlock_irqrestore(&ide_lock, flags);
304         } else {
305                 u8 ata66        = 0;
306                 pci_read_config_byte(hwif->pci_dev, 0x49, &ata66);
307                 if (!(hwif->udma_four))
308                         hwif->udma_four = (ata66&(hwif->channel?0x02:0x01))?0:1;
309         }
310
311         ide_setup_dma(hwif, dmabase, 8);
312 }
313
314 static int __devinit init_setup_aec62xx(struct pci_dev *dev, ide_pci_device_t *d)
315 {
316         return ide_setup_pci_device(dev, d);
317 }
318
319 static int __devinit init_setup_aec6x80(struct pci_dev *dev, ide_pci_device_t *d)
320 {
321         unsigned long bar4reg = pci_resource_start(dev, 4);
322
323         if (inb(bar4reg+2) & 0x10) {
324                 strcpy(d->name, "AEC6880");
325                 if (dev->device == PCI_DEVICE_ID_ARTOP_ATP865R)
326                         strcpy(d->name, "AEC6880R");
327         } else {
328                 strcpy(d->name, "AEC6280");
329                 if (dev->device == PCI_DEVICE_ID_ARTOP_ATP865R)
330                         strcpy(d->name, "AEC6280R");
331         }
332
333         return ide_setup_pci_device(dev, d);
334 }
335
336 static ide_pci_device_t aec62xx_chipsets[] __devinitdata = {
337         {       /* 0 */
338                 .name           = "AEC6210",
339                 .init_setup     = init_setup_aec62xx,
340                 .init_chipset   = init_chipset_aec62xx,
341                 .init_hwif      = init_hwif_aec62xx,
342                 .init_dma       = init_dma_aec62xx,
343                 .channels       = 2,
344                 .autodma        = AUTODMA,
345                 .enablebits     = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}},
346                 .bootable       = OFF_BOARD,
347         },{     /* 1 */
348                 .name           = "AEC6260",
349                 .init_setup     = init_setup_aec62xx,
350                 .init_chipset   = init_chipset_aec62xx,
351                 .init_hwif      = init_hwif_aec62xx,
352                 .init_dma       = init_dma_aec62xx,
353                 .channels       = 2,
354                 .autodma        = NOAUTODMA,
355                 .bootable       = OFF_BOARD,
356         },{     /* 2 */
357                 .name           = "AEC6260R",
358                 .init_setup     = init_setup_aec62xx,
359                 .init_chipset   = init_chipset_aec62xx,
360                 .init_hwif      = init_hwif_aec62xx,
361                 .init_dma       = init_dma_aec62xx,
362                 .channels       = 2,
363                 .autodma        = AUTODMA,
364                 .enablebits     = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}},
365                 .bootable       = NEVER_BOARD,
366         },{     /* 3 */
367                 .name           = "AEC6X80",
368                 .init_setup     = init_setup_aec6x80,
369                 .init_chipset   = init_chipset_aec62xx,
370                 .init_hwif      = init_hwif_aec62xx,
371                 .init_dma       = init_dma_aec62xx,
372                 .channels       = 2,
373                 .autodma        = AUTODMA,
374                 .bootable       = OFF_BOARD,
375         },{     /* 4 */
376                 .name           = "AEC6X80R",
377                 .init_setup     = init_setup_aec6x80,
378                 .init_chipset   = init_chipset_aec62xx,
379                 .init_hwif      = init_hwif_aec62xx,
380                 .init_dma       = init_dma_aec62xx,
381                 .channels       = 2,
382                 .autodma        = AUTODMA,
383                 .enablebits     = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}},
384                 .bootable       = OFF_BOARD,
385         }
386 };
387
388 /**
389  *      aec62xx_init_one        -       called when a AEC is found
390  *      @dev: the aec62xx device
391  *      @id: the matching pci id
392  *
393  *      Called when the PCI registration layer (or the IDE initialization)
394  *      finds a device matching our IDE device tables.
395  */
396  
397 static int __devinit aec62xx_init_one(struct pci_dev *dev, const struct pci_device_id *id)
398 {
399         ide_pci_device_t *d = &aec62xx_chipsets[id->driver_data];
400
401         return d->init_setup(dev, d);
402 }
403
404 static struct pci_device_id aec62xx_pci_tbl[] = {
405         { PCI_VENDOR_ID_ARTOP, PCI_DEVICE_ID_ARTOP_ATP850UF, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
406         { PCI_VENDOR_ID_ARTOP, PCI_DEVICE_ID_ARTOP_ATP860,   PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1 },
407         { PCI_VENDOR_ID_ARTOP, PCI_DEVICE_ID_ARTOP_ATP860R,  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2 },
408         { PCI_VENDOR_ID_ARTOP, PCI_DEVICE_ID_ARTOP_ATP865,   PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3 },
409         { PCI_VENDOR_ID_ARTOP, PCI_DEVICE_ID_ARTOP_ATP865R,  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4 },
410         { 0, },
411 };
412 MODULE_DEVICE_TABLE(pci, aec62xx_pci_tbl);
413
414 static struct pci_driver driver = {
415         .name           = "AEC62xx_IDE",
416         .id_table       = aec62xx_pci_tbl,
417         .probe          = aec62xx_init_one,
418 };
419
420 static int __init aec62xx_ide_init(void)
421 {
422         return ide_pci_register_driver(&driver);
423 }
424
425 module_init(aec62xx_ide_init);
426
427 MODULE_AUTHOR("Andre Hedrick");
428 MODULE_DESCRIPTION("PCI driver module for ARTOP AEC62xx IDE");
429 MODULE_LICENSE("GPL");