drivers/ide/ide-iops.c

   1 /*
   2  * linux/drivers/ide/ide-iops.c Version 0.37    Mar 05, 2003
   3  *
   4  *  Copyright (C) 2000-2002     Andre Hedrick <andre@linux-ide.org>
   5  *  Copyright (C) 2003          Red Hat <alan@redhat.com>
   6  *
   7  */
   8
   9 #include <linux/module.h>
  10 #include <linux/types.h>
  11 #include <linux/string.h>
  12 #include <linux/kernel.h>
  13 #include <linux/timer.h>
  14 #include <linux/mm.h>
  15 #include <linux/interrupt.h>
  16 #include <linux/major.h>
  17 #include <linux/errno.h>
  18 #include <linux/genhd.h>
  19 #include <linux/blkpg.h>
  20 #include <linux/slab.h>
  21 #include <linux/pci.h>
  22 #include <linux/delay.h>
  23 #include <linux/hdreg.h>
  24 #include <linux/ide.h>
  25 #include <linux/bitops.h>
  26 #include <linux/nmi.h>
  27
  28 #include <asm/byteorder.h>
  29 #include <asm/irq.h>
  30 #include <asm/uaccess.h>
  31 #include <asm/io.h>
  32
  33 /*
  34  *      Conventional PIO operations for ATA devices
  35  */
  36
  37 static u8 ide_inb (unsigned long port)
  38 {
  39         return (u8) inb(port);
  40 }
  41
  42 static u16 ide_inw (unsigned long port)
  43 {
  44         return (u16) inw(port);
  45 }
  46
  47 static void ide_insw (unsigned long port, void *addr, u32 count)
  48 {
  49         insw(port, addr, count);
  50 }
  51
  52 static void ide_insl (unsigned long port, void *addr, u32 count)
  53 {
  54         insl(port, addr, count);
  55 }
  56
  57 static void ide_outb (u8 val, unsigned long port)
  58 {
  59         outb(val, port);
  60 }
  61
  62 static void ide_outbsync (ide_drive_t *drive, u8 addr, unsigned long port)
  63 {
  64         outb(addr, port);
  65 }
  66
  67 static void ide_outw (u16 val, unsigned long port)
  68 {
  69         outw(val, port);
  70 }
  71
  72 static void ide_outsw (unsigned long port, void *addr, u32 count)
  73 {
  74         outsw(port, addr, count);
  75 }
  76
  77 static void ide_outsl (unsigned long port, void *addr, u32 count)
  78 {
  79         outsl(port, addr, count);
  80 }
  81
  82 void default_hwif_iops (ide_hwif_t *hwif)
  83 {
  84         hwif->OUTB      = ide_outb;
  85         hwif->OUTBSYNC  = ide_outbsync;
  86         hwif->OUTW      = ide_outw;
  87         hwif->OUTSW     = ide_outsw;
  88         hwif->OUTSL     = ide_outsl;
  89         hwif->INB       = ide_inb;
  90         hwif->INW       = ide_inw;
  91         hwif->INSW      = ide_insw;
  92         hwif->INSL      = ide_insl;
  93 }
  94
  95 /*
  96  *      MMIO operations, typically used for SATA controllers
  97  */
  98
  99 static u8 ide_mm_inb (unsigned long port)
 100 {
 101         return (u8) readb((void __iomem *) port);
 102 }
 103
 104 static u16 ide_mm_inw (unsigned long port)
 105 {
 106         return (u16) readw((void __iomem *) port);
 107 }
 108
 109 static void ide_mm_insw (unsigned long port, void *addr, u32 count)
 110 {
 111         __ide_mm_insw((void __iomem *) port, addr, count);
 112 }
 113
 114 static void ide_mm_insl (unsigned long port, void *addr, u32 count)
 115 {
 116         __ide_mm_insl((void __iomem *) port, addr, count);
 117 }
 118
 119 static void ide_mm_outb (u8 value, unsigned long port)
 120 {
 121         writeb(value, (void __iomem *) port);
 122 }
 123
 124 static void ide_mm_outbsync (ide_drive_t *drive, u8 value, unsigned long port)
 125 {
 126         writeb(value, (void __iomem *) port);
 127 }
 128
 129 static void ide_mm_outw (u16 value, unsigned long port)
 130 {
 131         writew(value, (void __iomem *) port);
 132 }
 133
 134 static void ide_mm_outsw (unsigned long port, void *addr, u32 count)
 135 {
 136         __ide_mm_outsw((void __iomem *) port, addr, count);
 137 }
 138
 139 static void ide_mm_outsl (unsigned long port, void *addr, u32 count)
 140 {
 141         __ide_mm_outsl((void __iomem *) port, addr, count);
 142 }
 143
 144 void default_hwif_mmiops (ide_hwif_t *hwif)
 145 {
 146         hwif->OUTB      = ide_mm_outb;
 147         /* Most systems will need to override OUTBSYNC, alas however
 148            this one is controller specific! */
 149         hwif->OUTBSYNC  = ide_mm_outbsync;
 150         hwif->OUTW      = ide_mm_outw;
 151         hwif->OUTSW     = ide_mm_outsw;
 152         hwif->OUTSL     = ide_mm_outsl;
 153         hwif->INB       = ide_mm_inb;
 154         hwif->INW       = ide_mm_inw;
 155         hwif->INSW      = ide_mm_insw;
 156         hwif->INSL      = ide_mm_insl;
 157 }
 158
 159 EXPORT_SYMBOL(default_hwif_mmiops);
 160
 161 u32 ide_read_24 (ide_drive_t *drive)
 162 {
 163         u8 hcyl = HWIF(drive)->INB(IDE_HCYL_REG);
 164         u8 lcyl = HWIF(drive)->INB(IDE_LCYL_REG);
 165         u8 sect = HWIF(drive)->INB(IDE_SECTOR_REG);
 166         return (hcyl<<16)|(lcyl<<8)|sect;
 167 }
 168
 169 void SELECT_DRIVE (ide_drive_t *drive)
 170 {
 171         if (HWIF(drive)->selectproc)
 172                 HWIF(drive)->selectproc(drive);
 173         HWIF(drive)->OUTB(drive->select.all, IDE_SELECT_REG);
 174 }
 175
 176 EXPORT_SYMBOL(SELECT_DRIVE);
 177
 178 void SELECT_INTERRUPT (ide_drive_t *drive)
 179 {
 180         if (HWIF(drive)->intrproc)
 181                 HWIF(drive)->intrproc(drive);
 182         else
 183                 HWIF(drive)->OUTB(drive->ctl|2, IDE_CONTROL_REG);
 184 }
 185
 186 void SELECT_MASK (ide_drive_t *drive, int mask)
 187 {
 188         if (HWIF(drive)->maskproc)
 189                 HWIF(drive)->maskproc(drive, mask);
 190 }
 191
 192 void QUIRK_LIST (ide_drive_t *drive)
 193 {
 194         if (HWIF(drive)->quirkproc)
 195                 drive->quirk_list = HWIF(drive)->quirkproc(drive);
 196 }
 197
 198 /*
 199  * Some localbus EIDE interfaces require a special access sequence
 200  * when using 32-bit I/O instructions to transfer data.  We call this
 201  * the "vlb_sync" sequence, which consists of three successive reads
 202  * of the sector count register location, with interrupts disabled
 203  * to ensure that the reads all happen together.
 204  */
 205 static void ata_vlb_sync(ide_drive_t *drive, unsigned long port)
 206 {
 207         (void) HWIF(drive)->INB(port);
 208         (void) HWIF(drive)->INB(port);
 209         (void) HWIF(drive)->INB(port);
 210 }
 211
 212 /*
 213  * This is used for most PIO data transfers *from* the IDE interface
 214  */
 215 static void ata_input_data(ide_drive_t *drive, void *buffer, u32 wcount)
 216 {
 217         ide_hwif_t *hwif        = HWIF(drive);
 218         u8 io_32bit             = drive->io_32bit;
 219
 220         if (io_32bit) {
 221                 if (io_32bit & 2) {
 222                         unsigned long flags;
 223                         local_irq_save(flags);
 224                         ata_vlb_sync(drive, IDE_NSECTOR_REG);
 225                         hwif->INSL(IDE_DATA_REG, buffer, wcount);
 226                         local_irq_restore(flags);
 227                 } else
 228                         hwif->INSL(IDE_DATA_REG, buffer, wcount);
 229         } else {
 230                 hwif->INSW(IDE_DATA_REG, buffer, wcount<<1);
 231         }
 232 }
 233
 234 /*
 235  * This is used for most PIO data transfers *to* the IDE interface
 236  */
 237 static void ata_output_data(ide_drive_t *drive, void *buffer, u32 wcount)
 238 {
 239         ide_hwif_t *hwif        = HWIF(drive);
 240         u8 io_32bit             = drive->io_32bit;
 241
 242         if (io_32bit) {
 243                 if (io_32bit & 2) {
 244                         unsigned long flags;
 245                         local_irq_save(flags);
 246                         ata_vlb_sync(drive, IDE_NSECTOR_REG);
 247                         hwif->OUTSL(IDE_DATA_REG, buffer, wcount);
 248                         local_irq_restore(flags);
 249                 } else
 250                         hwif->OUTSL(IDE_DATA_REG, buffer, wcount);
 251         } else {
 252                 hwif->OUTSW(IDE_DATA_REG, buffer, wcount<<1);
 253         }
 254 }
 255
 256 /*
 257  * The following routines are mainly used by the ATAPI drivers.
 258  *
 259  * These routines will round up any request for an odd number of bytes,
 260  * so if an odd bytecount is specified, be sure that there's at least one
 261  * extra byte allocated for the buffer.
 262  */
 263
 264 static void atapi_input_bytes(ide_drive_t *drive, void *buffer, u32 bytecount)
 265 {
 266         ide_hwif_t *hwif = HWIF(drive);
 267
 268         ++bytecount;
 269 #if defined(CONFIG_ATARI) || defined(CONFIG_Q40)
 270         if (MACH_IS_ATARI || MACH_IS_Q40) {
 271                 /* Atari has a byte-swapped IDE interface */
 272                 insw_swapw(IDE_DATA_REG, buffer, bytecount / 2);
 273                 return;
 274         }
 275 #endif /* CONFIG_ATARI || CONFIG_Q40 */
 276         hwif->ata_input_data(drive, buffer, bytecount / 4);
 277         if ((bytecount & 0x03) >= 2)
 278                 hwif->INSW(IDE_DATA_REG, ((u8 *)buffer)+(bytecount & ~0x03), 1);
 279 }
 280
 281 static void atapi_output_bytes(ide_drive_t *drive, void *buffer, u32 bytecount)
 282 {
 283         ide_hwif_t *hwif = HWIF(drive);
 284
 285         ++bytecount;
 286 #if defined(CONFIG_ATARI) || defined(CONFIG_Q40)
 287         if (MACH_IS_ATARI || MACH_IS_Q40) {
 288                 /* Atari has a byte-swapped IDE interface */
 289                 outsw_swapw(IDE_DATA_REG, buffer, bytecount / 2);
 290                 return;
 291         }
 292 #endif /* CONFIG_ATARI || CONFIG_Q40 */
 293         hwif->ata_output_data(drive, buffer, bytecount / 4);
 294         if ((bytecount & 0x03) >= 2)
 295                 hwif->OUTSW(IDE_DATA_REG, ((u8*)buffer)+(bytecount & ~0x03), 1);
 296 }
 297
 298 void default_hwif_transport(ide_hwif_t *hwif)
 299 {
 300         hwif->ata_input_data            = ata_input_data;
 301         hwif->ata_output_data           = ata_output_data;
 302         hwif->atapi_input_bytes         = atapi_input_bytes;
 303         hwif->atapi_output_bytes        = atapi_output_bytes;
 304 }
 305
 306 /*
 307  * Beginning of Taskfile OPCODE Library and feature sets.
 308  */
 309 void ide_fix_driveid (struct hd_driveid *id)
 310 {
 311 #ifndef __LITTLE_ENDIAN
 312 # ifdef __BIG_ENDIAN
 313         int i;
 314         u16 *stringcast;
 315
 316         id->config         = __le16_to_cpu(id->config);
 317         id->cyls           = __le16_to_cpu(id->cyls);
 318         id->reserved2      = __le16_to_cpu(id->reserved2);
 319         id->heads          = __le16_to_cpu(id->heads);
 320         id->track_bytes    = __le16_to_cpu(id->track_bytes);
 321         id->sector_bytes   = __le16_to_cpu(id->sector_bytes);
 322         id->sectors        = __le16_to_cpu(id->sectors);
 323         id->vendor0        = __le16_to_cpu(id->vendor0);
 324         id->vendor1        = __le16_to_cpu(id->vendor1);
 325         id->vendor2        = __le16_to_cpu(id->vendor2);
 326         stringcast = (u16 *)&id->serial_no[0];
 327         for (i = 0; i < (20/2); i++)
 328                 stringcast[i] = __le16_to_cpu(stringcast[i]);
 329         id->buf_type       = __le16_to_cpu(id->buf_type);
 330         id->buf_size       = __le16_to_cpu(id->buf_size);
 331         id->ecc_bytes      = __le16_to_cpu(id->ecc_bytes);
 332         stringcast = (u16 *)&id->fw_rev[0];
 333         for (i = 0; i < (8/2); i++)
 334                 stringcast[i] = __le16_to_cpu(stringcast[i]);
 335         stringcast = (u16 *)&id->model[0];
 336         for (i = 0; i < (40/2); i++)
 337                 stringcast[i] = __le16_to_cpu(stringcast[i]);
 338         id->dword_io       = __le16_to_cpu(id->dword_io);
 339         id->reserved50     = __le16_to_cpu(id->reserved50);
 340         id->field_valid    = __le16_to_cpu(id->field_valid);
 341         id->cur_cyls       = __le16_to_cpu(id->cur_cyls);
 342         id->cur_heads      = __le16_to_cpu(id->cur_heads);
 343         id->cur_sectors    = __le16_to_cpu(id->cur_sectors);
 344         id->cur_capacity0  = __le16_to_cpu(id->cur_capacity0);
 345         id->cur_capacity1  = __le16_to_cpu(id->cur_capacity1);
 346         id->lba_capacity   = __le32_to_cpu(id->lba_capacity);
 347         id->dma_1word      = __le16_to_cpu(id->dma_1word);
 348         id->dma_mword      = __le16_to_cpu(id->dma_mword);
 349         id->eide_pio_modes = __le16_to_cpu(id->eide_pio_modes);
 350         id->eide_dma_min   = __le16_to_cpu(id->eide_dma_min);
 351         id->eide_dma_time  = __le16_to_cpu(id->eide_dma_time);
 352         id->eide_pio       = __le16_to_cpu(id->eide_pio);
 353         id->eide_pio_iordy = __le16_to_cpu(id->eide_pio_iordy);
 354         for (i = 0; i < 2; ++i)
 355                 id->words69_70[i] = __le16_to_cpu(id->words69_70[i]);
 356         for (i = 0; i < 4; ++i)
 357                 id->words71_74[i] = __le16_to_cpu(id->words71_74[i]);
 358         id->queue_depth    = __le16_to_cpu(id->queue_depth);
 359         for (i = 0; i < 4; ++i)
 360                 id->words76_79[i] = __le16_to_cpu(id->words76_79[i]);
 361         id->major_rev_num  = __le16_to_cpu(id->major_rev_num);
 362         id->minor_rev_num  = __le16_to_cpu(id->minor_rev_num);
 363         id->command_set_1  = __le16_to_cpu(id->command_set_1);
 364         id->command_set_2  = __le16_to_cpu(id->command_set_2);
 365         id->cfsse          = __le16_to_cpu(id->cfsse);
 366         id->cfs_enable_1   = __le16_to_cpu(id->cfs_enable_1);
 367         id->cfs_enable_2   = __le16_to_cpu(id->cfs_enable_2);
 368         id->csf_default    = __le16_to_cpu(id->csf_default);
 369         id->dma_ultra      = __le16_to_cpu(id->dma_ultra);
 370         id->trseuc         = __le16_to_cpu(id->trseuc);
 371         id->trsEuc         = __le16_to_cpu(id->trsEuc);
 372         id->CurAPMvalues   = __le16_to_cpu(id->CurAPMvalues);
 373         id->mprc           = __le16_to_cpu(id->mprc);
 374         id->hw_config      = __le16_to_cpu(id->hw_config);
 375         id->acoustic       = __le16_to_cpu(id->acoustic);
 376         id->msrqs          = __le16_to_cpu(id->msrqs);
 377         id->sxfert         = __le16_to_cpu(id->sxfert);
 378         id->sal            = __le16_to_cpu(id->sal);
 379         id->spg            = __le32_to_cpu(id->spg);
 380         id->lba_capacity_2 = __le64_to_cpu(id->lba_capacity_2);
 381         for (i = 0; i < 22; i++)
 382                 id->words104_125[i]   = __le16_to_cpu(id->words104_125[i]);
 383         id->last_lun       = __le16_to_cpu(id->last_lun);
 384         id->word127        = __le16_to_cpu(id->word127);
 385         id->dlf            = __le16_to_cpu(id->dlf);
 386         id->csfo           = __le16_to_cpu(id->csfo);
 387         for (i = 0; i < 26; i++)
 388                 id->words130_155[i] = __le16_to_cpu(id->words130_155[i]);
 389         id->word156        = __le16_to_cpu(id->word156);
 390         for (i = 0; i < 3; i++)
 391                 id->words157_159[i] = __le16_to_cpu(id->words157_159[i]);
 392         id->cfa_power      = __le16_to_cpu(id->cfa_power);
 393         for (i = 0; i < 14; i++)
 394                 id->words161_175[i] = __le16_to_cpu(id->words161_175[i]);
 395         for (i = 0; i < 31; i++)
 396                 id->words176_205[i] = __le16_to_cpu(id->words176_205[i]);
 397         for (i = 0; i < 48; i++)
 398                 id->words206_254[i] = __le16_to_cpu(id->words206_254[i]);
 399         id->integrity_word  = __le16_to_cpu(id->integrity_word);
 400 # else
 401 #  error "Please fix <asm/byteorder.h>"
 402 # endif
 403 #endif
 404 }
 405
 406 /* FIXME: exported for use by the USB storage (isd200.c) code only */
 407 EXPORT_SYMBOL(ide_fix_driveid);
 408
 409 void ide_fixstring (u8 *s, const int bytecount, const int byteswap)
 410 {
 411         u8 *p = s, *end = &s[bytecount & ~1]; /* bytecount must be even */
 412
 413         if (byteswap) {
 414                 /* convert from big-endian to host byte order */
 415                 for (p = end ; p != s;) {
 416                         unsigned short *pp = (unsigned short *) (p -= 2);
 417                         *pp = ntohs(*pp);
 418                 }
 419         }
 420         /* strip leading blanks */
 421         while (s != end && *s == ' ')
 422                 ++s;
 423         /* compress internal blanks and strip trailing blanks */
 424         while (s != end && *s) {
 425                 if (*s++ != ' ' || (s != end && *s && *s != ' '))
 426                         *p++ = *(s-1);
 427         }
 428         /* wipe out trailing garbage */
 429         while (p != end)
 430                 *p++ = '\0';
 431 }
 432
 433 EXPORT_SYMBOL(ide_fixstring);
 434
 435 /*
 436  * Needed for PCI irq sharing
 437  */
 438 int drive_is_ready (ide_drive_t *drive)
 439 {
 440         ide_hwif_t *hwif        = HWIF(drive);
 441         u8 stat                 = 0;
 442
 443         if (drive->waiting_for_dma)
 444                 return hwif->ide_dma_test_irq(drive);
 445
 446 #if 0
 447         /* need to guarantee 400ns since last command was issued */
 448         udelay(1);
 449 #endif
 450
 451 #ifdef CONFIG_IDEPCI_SHARE_IRQ
 452         /*
 453          * We do a passive status test under shared PCI interrupts on
 454          * cards that truly share the ATA side interrupt, but may also share
 455          * an interrupt with another pci card/device.  We make no assumptions
 456          * about possible isa-pnp and pci-pnp issues yet.
 457          */
 458         if (IDE_CONTROL_REG)
 459                 stat = hwif->INB(IDE_ALTSTATUS_REG);
 460         else
 461 #endif /* CONFIG_IDEPCI_SHARE_IRQ */
 462                 /* Note: this may clear a pending IRQ!! */
 463                 stat = hwif->INB(IDE_STATUS_REG);
 464
 465         if (stat & BUSY_STAT)
 466                 /* drive busy:  definitely not interrupting */
 467                 return 0;
 468
 469         /* drive ready: *might* be interrupting */
 470         return 1;
 471 }
 472
 473 EXPORT_SYMBOL(drive_is_ready);
 474
 475 /*
 476  * Global for All, and taken from ide-pmac.c. Can be called
 477  * with spinlock held & IRQs disabled, so don't schedule !
 478  */
 479 int wait_for_ready (ide_drive_t *drive, int timeout)
 480 {
 481         ide_hwif_t *hwif        = HWIF(drive);
 482         u8 stat                 = 0;
 483
 484         while(--timeout) {
 485                 stat = hwif->INB(IDE_STATUS_REG);
 486                 if (!(stat & BUSY_STAT)) {
 487                         if (drive->ready_stat == 0)
 488                                 break;
 489                         else if ((stat & drive->ready_stat)||(stat & ERR_STAT))
 490                                 break;
 491                 }
 492                 mdelay(1);
 493         }
 494         if ((stat & ERR_STAT) || timeout <= 0) {
 495                 if (stat & ERR_STAT) {
 496                         printk(KERN_ERR "%s: wait_for_ready, "
 497                                 "error status: %x\n", drive->name, stat);
 498                 }
 499                 return 1;
 500         }
 501         return 0;
 502 }
 503
 504 /*
 505  * This routine busy-waits for the drive status to be not "busy".
 506  * It then checks the status for all of the "good" bits and none
 507  * of the "bad" bits, and if all is okay it returns 0.  All other
 508  * cases return 1 after invoking ide_error() -- caller should just return.
 509  *
 510  * This routine should get fixed to not hog the cpu during extra long waits..
 511  * That could be done by busy-waiting for the first jiffy or two, and then
 512  * setting a timer to wake up at half second intervals thereafter,
 513  * until timeout is achieved, before timing out.
 514  */
 515 int ide_wait_stat (ide_startstop_t *startstop, ide_drive_t *drive, u8 good, u8 bad, unsigned long timeout)
 516 {
 517         ide_hwif_t *hwif = HWIF(drive);
 518         u8 stat;
 519         int i;
 520         unsigned long flags;
 521
 522         /* bail early if we've exceeded max_failures */
 523         if (drive->max_failures && (drive->failures > drive->max_failures)) {
 524                 *startstop = ide_stopped;
 525                 return 1;
 526         }
 527
 528         udelay(1);      /* spec allows drive 400ns to assert "BUSY" */
 529         if ((stat = hwif->INB(IDE_STATUS_REG)) & BUSY_STAT) {
 530                 local_irq_set(flags);
 531                 timeout += jiffies;
 532                 while ((stat = hwif->INB(IDE_STATUS_REG)) & BUSY_STAT) {
 533                         if (time_after(jiffies, timeout)) {
 534                                 /*
 535                                  * One last read after the timeout in case
 536                                  * heavy interrupt load made us not make any
 537                                  * progress during the timeout..
 538                                  */
 539                                 stat = hwif->INB(IDE_STATUS_REG);
 540                                 if (!(stat & BUSY_STAT))
 541                                         break;
 542
 543                                 local_irq_restore(flags);
 544                                 *startstop = ide_error(drive, "status timeout", stat);
 545                                 return 1;
 546                         }
 547                 }
 548                 local_irq_restore(flags);
 549         }
 550         /*
 551          * Allow status to settle, then read it again.
 552          * A few rare drives vastly violate the 400ns spec here,
 553          * so we'll wait up to 10usec for a "good" status
 554          * rather than expensively fail things immediately.
 555          * This fix courtesy of Matthew Faupel & Niccolo Rigacci.
 556          */
 557         for (i = 0; i < 10; i++) {
 558                 udelay(1);
 559                 if (OK_STAT((stat = hwif->INB(IDE_STATUS_REG)), good, bad))
 560                         return 0;
 561         }
 562         *startstop = ide_error(drive, "status error", stat);
 563         return 1;
 564 }
 565
 566 EXPORT_SYMBOL(ide_wait_stat);
 567
 568 /**
 569  *      ide_in_drive_list       -       look for drive in black/white list
 570  *      @id: drive identifier
 571  *      @drive_table: list to inspect
 572  *
 573  *      Look for a drive in the blacklist and the whitelist tables
 574  *      Returns 1 if the drive is found in the table.
 575  */
 576
 577 int ide_in_drive_list(struct hd_driveid *id, const struct drive_list_entry *drive_table)
 578 {
 579         for ( ; drive_table->id_model; drive_table++)
 580                 if ((!strcmp(drive_table->id_model, id->model)) &&
 581                     (!drive_table->id_firmware ||
 582                      strstr(id->fw_rev, drive_table->id_firmware)))
 583                         return 1;
 584         return 0;
 585 }
 586
 587 /*
 588  * Early UDMA66 devices don't set bit14 to 1, only bit13 is valid.
 589  * We list them here and depend on the device side cable detection for them.
 590  */
 591 static const struct drive_list_entry ivb_list[] = {
 592         { "QUANTUM FIREBALLlct10 05"    , "A03.0900"    },
 593         { NULL                          , NULL          }
 594 };
 595
 596 /*
 597  *  All hosts that use the 80c ribbon must use!
 598  *  The name is derived from upper byte of word 93 and the 80c ribbon.
 599  */
 600 u8 eighty_ninty_three (ide_drive_t *drive)
 601 {
 602         ide_hwif_t *hwif = drive->hwif;
 603         struct hd_driveid *id = drive->id;
 604         int ivb = ide_in_drive_list(id, ivb_list);
 605
 606         if (hwif->cbl == ATA_CBL_PATA40_SHORT)
 607                 return 1;
 608
 609         if (ivb)
 610                 printk(KERN_DEBUG "%s: skipping word 93 validity check\n",
 611                                   drive->name);
 612
 613         if (hwif->cbl != ATA_CBL_PATA80 && !ivb)
 614                 goto no_80w;
 615
 616         /* Check for SATA but only if we are ATA5 or higher */
 617         if (id->hw_config == 0 && (id->major_rev_num & 0x7FE0))
 618                 return 1;
 619
 620         /*
 621          * FIXME:
 622          * - change master/slave IDENTIFY order
 623          * - force bit13 (80c cable present) check also for !ivb devices
 624          *   (unless the slave device is pre-ATA3)
 625          */
 626 #ifndef CONFIG_IDEDMA_IVB
 627         if ((id->hw_config & 0x4000) || (ivb && (id->hw_config & 0x2000)))
 628 #else
 629         if (id->hw_config & 0x6000)
 630 #endif
 631                 return 1;
 632
 633 no_80w:
 634         if (drive->udma33_warned == 1)
 635                 return 0;
 636
 637         printk(KERN_WARNING "%s: %s side 80-wire cable detection failed, "
 638                             "limiting max speed to UDMA33\n",
 639                             drive->name,
 640                             hwif->cbl == ATA_CBL_PATA80 ? "drive" : "host");
 641
 642         drive->udma33_warned = 1;
 643
 644         return 0;
 645 }
 646
 647 int ide_ata66_check (ide_drive_t *drive, ide_task_t *args)
 648 {
 649         if ((args->tfRegister[IDE_COMMAND_OFFSET] == WIN_SETFEATURES) &&
 650             (args->tfRegister[IDE_SECTOR_OFFSET] > XFER_UDMA_2) &&
 651             (args->tfRegister[IDE_FEATURE_OFFSET] == SETFEATURES_XFER)) {
 652                 if (eighty_ninty_three(drive) == 0) {
 653                         printk(KERN_WARNING "%s: UDMA speeds >UDMA33 cannot "
 654                                             "be set\n", drive->name);
 655                         return 1;
 656                 }
 657         }
 658
 659         return 0;
 660 }
 661
 662 /*
 663  * Backside of HDIO_DRIVE_CMD call of SETFEATURES_XFER.
 664  * 1 : Safe to update drive->id DMA registers.
 665  * 0 : OOPs not allowed.
 666  */
 667 int set_transfer (ide_drive_t *drive, ide_task_t *args)
 668 {
 669         if ((args->tfRegister[IDE_COMMAND_OFFSET] == WIN_SETFEATURES) &&
 670             (args->tfRegister[IDE_SECTOR_OFFSET] >= XFER_SW_DMA_0) &&
 671             (args->tfRegister[IDE_FEATURE_OFFSET] == SETFEATURES_XFER) &&
 672             (drive->id->dma_ultra ||
 673              drive->id->dma_mword ||
 674              drive->id->dma_1word))
 675                 return 1;
 676
 677         return 0;
 678 }
 679
 680 #ifdef CONFIG_BLK_DEV_IDEDMA
 681 static u8 ide_auto_reduce_xfer (ide_drive_t *drive)
 682 {
 683         if (!drive->crc_count)
 684                 return drive->current_speed;
 685         drive->crc_count = 0;
 686
 687         switch(drive->current_speed) {
 688                 case XFER_UDMA_7:       return XFER_UDMA_6;
 689                 case XFER_UDMA_6:       return XFER_UDMA_5;
 690                 case XFER_UDMA_5:       return XFER_UDMA_4;
 691                 case XFER_UDMA_4:       return XFER_UDMA_3;
 692                 case XFER_UDMA_3:       return XFER_UDMA_2;
 693                 case XFER_UDMA_2:       return XFER_UDMA_1;
 694                 case XFER_UDMA_1:       return XFER_UDMA_0;
 695                         /*
 696                          * OOPS we do not goto non Ultra DMA modes
 697                          * without iCRC's available we force
 698                          * the system to PIO and make the user
 699                          * invoke the ATA-1 ATA-2 DMA modes.
 700                          */
 701                 case XFER_UDMA_0:
 702                 default:                return XFER_PIO_4;
 703         }
 704 }
 705 #endif /* CONFIG_BLK_DEV_IDEDMA */
 706
 707 /*
 708  * Update the
 709  */
 710 int ide_driveid_update (ide_drive_t *drive)
 711 {
 712         ide_hwif_t *hwif        = HWIF(drive);
 713         struct hd_driveid *id;
 714 #if 0
 715         id = kmalloc(SECTOR_WORDS*4, GFP_ATOMIC);
 716         if (!id)
 717                 return 0;
 718
 719         taskfile_lib_get_identify(drive, (char *)&id);
 720
 721         ide_fix_driveid(id);
 722         if (id) {
 723                 drive->id->dma_ultra = id->dma_ultra;
 724                 drive->id->dma_mword = id->dma_mword;
 725                 drive->id->dma_1word = id->dma_1word;
 726                 /* anything more ? */
 727                 kfree(id);
 728         }
 729         return 1;
 730 #else
 731         /*
 732          * Re-read drive->id for possible DMA mode
 733          * change (copied from ide-probe.c)
 734          */
 735         unsigned long timeout, flags;
 736
 737         SELECT_MASK(drive, 1);
 738         if (IDE_CONTROL_REG)
 739                 hwif->OUTB(drive->ctl,IDE_CONTROL_REG);
 740         msleep(50);
 741         hwif->OUTB(WIN_IDENTIFY, IDE_COMMAND_REG);
 742         timeout = jiffies + WAIT_WORSTCASE;
 743         do {
 744                 if (time_after(jiffies, timeout)) {
 745                         SELECT_MASK(drive, 0);
 746                         return 0;       /* drive timed-out */
 747                 }
 748                 msleep(50);     /* give drive a breather */
 749         } while (hwif->INB(IDE_ALTSTATUS_REG) & BUSY_STAT);
 750         msleep(50);     /* wait for IRQ and DRQ_STAT */
 751         if (!OK_STAT(hwif->INB(IDE_STATUS_REG),DRQ_STAT,BAD_R_STAT)) {
 752                 SELECT_MASK(drive, 0);
 753                 printk("%s: CHECK for good STATUS\n", drive->name);
 754                 return 0;
 755         }
 756         local_irq_save(flags);
 757         SELECT_MASK(drive, 0);
 758         id = kmalloc(SECTOR_WORDS*4, GFP_ATOMIC);
 759         if (!id) {
 760                 local_irq_restore(flags);
 761                 return 0;
 762         }
 763         ata_input_data(drive, id, SECTOR_WORDS);
 764         (void) hwif->INB(IDE_STATUS_REG);       /* clear drive IRQ */
 765         local_irq_enable();
 766         local_irq_restore(flags);
 767         ide_fix_driveid(id);
 768         if (id) {
 769                 drive->id->dma_ultra = id->dma_ultra;
 770                 drive->id->dma_mword = id->dma_mword;
 771                 drive->id->dma_1word = id->dma_1word;
 772                 /* anything more ? */
 773                 kfree(id);
 774         }
 775
 776         return 1;
 777 #endif
 778 }
 779
 780 /*
 781  * Similar to ide_wait_stat(), except it never calls ide_error internally.
 782  * This is a kludge to handle the new ide_config_drive_speed() function,
 783  * and should not otherwise be used anywhere.  Eventually, the tuneproc's
 784  * should be updated to return ide_startstop_t, in which case we can get
 785  * rid of this abomination again.  :)   -ml
 786  *
 787  * It is gone..........
 788  *
 789  * const char *msg == consider adding for verbose errors.
 790  */
 791 int ide_config_drive_speed (ide_drive_t *drive, u8 speed)
 792 {
 793         ide_hwif_t *hwif        = HWIF(drive);
 794         int     i, error        = 1;
 795         u8 stat;
 796
 797 //      while (HWGROUP(drive)->busy)
 798 //              msleep(50);
 799
 800 #ifdef CONFIG_BLK_DEV_IDEDMA
 801         if (hwif->ide_dma_check)         /* check if host supports DMA */
 802                 hwif->dma_host_off(drive);
 803 #endif
 804
 805         /*
 806          * Don't use ide_wait_cmd here - it will
 807          * attempt to set_geometry and recalibrate,
 808          * but for some reason these don't work at
 809          * this point (lost interrupt).
 810          */
 811         /*
 812          * Select the drive, and issue the SETFEATURES command
 813          */
 814         disable_irq_nosync(hwif->irq);
 815
 816         /*
 817          *      FIXME: we race against the running IRQ here if
 818          *      this is called from non IRQ context. If we use
 819          *      disable_irq() we hang on the error path. Work
 820          *      is needed.
 821          */
 822
 823         udelay(1);
 824         SELECT_DRIVE(drive);
 825         SELECT_MASK(drive, 0);
 826         udelay(1);
 827         if (IDE_CONTROL_REG)
 828                 hwif->OUTB(drive->ctl | 2, IDE_CONTROL_REG);
 829         hwif->OUTB(speed, IDE_NSECTOR_REG);
 830         hwif->OUTB(SETFEATURES_XFER, IDE_FEATURE_REG);
 831         hwif->OUTB(WIN_SETFEATURES, IDE_COMMAND_REG);
 832         if ((IDE_CONTROL_REG) && (drive->quirk_list == 2))
 833                 hwif->OUTB(drive->ctl, IDE_CONTROL_REG);
 834         udelay(1);
 835         /*
 836          * Wait for drive to become non-BUSY
 837          */
 838         if ((stat = hwif->INB(IDE_STATUS_REG)) & BUSY_STAT) {
 839                 unsigned long flags, timeout;
 840                 local_irq_set(flags);
 841                 timeout = jiffies + WAIT_CMD;
 842                 while ((stat = hwif->INB(IDE_STATUS_REG)) & BUSY_STAT) {
 843                         if (time_after(jiffies, timeout))
 844                                 break;
 845                 }
 846                 local_irq_restore(flags);
 847         }
 848
 849         /*
 850          * Allow status to settle, then read it again.
 851          * A few rare drives vastly violate the 400ns spec here,
 852          * so we'll wait up to 10usec for a "good" status
 853          * rather than expensively fail things immediately.
 854          * This fix courtesy of Matthew Faupel & Niccolo Rigacci.
 855          */
 856         for (i = 0; i < 10; i++) {
 857                 udelay(1);
 858                 if (OK_STAT((stat = hwif->INB(IDE_STATUS_REG)), DRIVE_READY, BUSY_STAT|DRQ_STAT|ERR_STAT)) {
 859                         error = 0;
 860                         break;
 861                 }
 862         }
 863
 864         SELECT_MASK(drive, 0);
 865
 866         enable_irq(hwif->irq);
 867
 868         if (error) {
 869                 (void) ide_dump_status(drive, "set_drive_speed_status", stat);
 870                 return error;
 871         }
 872
 873         drive->id->dma_ultra &= ~0xFF00;
 874         drive->id->dma_mword &= ~0x0F00;
 875         drive->id->dma_1word &= ~0x0F00;
 876
 877 #ifdef CONFIG_BLK_DEV_IDEDMA
 878         if (speed >= XFER_SW_DMA_0)
 879                 hwif->dma_host_on(drive);
 880         else if (hwif->ide_dma_check)   /* check if host supports DMA */
 881                 hwif->dma_off_quietly(drive);
 882 #endif
 883
 884         switch(speed) {
 885                 case XFER_UDMA_7:   drive->id->dma_ultra |= 0x8080; break;
 886                 case XFER_UDMA_6:   drive->id->dma_ultra |= 0x4040; break;
 887                 case XFER_UDMA_5:   drive->id->dma_ultra |= 0x2020; break;
 888                 case XFER_UDMA_4:   drive->id->dma_ultra |= 0x1010; break;
 889                 case XFER_UDMA_3:   drive->id->dma_ultra |= 0x0808; break;
 890                 case XFER_UDMA_2:   drive->id->dma_ultra |= 0x0404; break;
 891                 case XFER_UDMA_1:   drive->id->dma_ultra |= 0x0202; break;
 892                 case XFER_UDMA_0:   drive->id->dma_ultra |= 0x0101; break;
 893                 case XFER_MW_DMA_2: drive->id->dma_mword |= 0x0404; break;
 894                 case XFER_MW_DMA_1: drive->id->dma_mword |= 0x0202; break;
 895                 case XFER_MW_DMA_0: drive->id->dma_mword |= 0x0101; break;
 896                 case XFER_SW_DMA_2: drive->id->dma_1word |= 0x0404; break;
 897                 case XFER_SW_DMA_1: drive->id->dma_1word |= 0x0202; break;
 898                 case XFER_SW_DMA_0: drive->id->dma_1word |= 0x0101; break;
 899                 default: break;
 900         }
 901         if (!drive->init_speed)
 902                 drive->init_speed = speed;
 903         drive->current_speed = speed;
 904         return error;
 905 }
 906
 907 EXPORT_SYMBOL(ide_config_drive_speed);
 908
 909
 910 /*
 911  * This should get invoked any time we exit the driver to
 912  * wait for an interrupt response from a drive.  handler() points
 913  * at the appropriate code to handle the next interrupt, and a
 914  * timer is started to prevent us from waiting forever in case
 915  * something goes wrong (see the ide_timer_expiry() handler later on).
 916  *
 917  * See also ide_execute_command
 918  */
 919 static void __ide_set_handler (ide_drive_t *drive, ide_handler_t *handler,
 920                       unsigned int timeout, ide_expiry_t *expiry)
 921 {
 922         ide_hwgroup_t *hwgroup = HWGROUP(drive);
 923
 924         if (hwgroup->handler != NULL) {
 925                 printk(KERN_CRIT "%s: ide_set_handler: handler not null; "
 926                         "old=%p, new=%p\n",
 927                         drive->name, hwgroup->handler, handler);
 928         }
 929         hwgroup->handler        = handler;
 930         hwgroup->expiry         = expiry;
 931         hwgroup->timer.expires  = jiffies + timeout;
 932         hwgroup->req_gen_timer = hwgroup->req_gen;
 933         add_timer(&hwgroup->timer);
 934 }
 935
 936 void ide_set_handler (ide_drive_t *drive, ide_handler_t *handler,
 937                       unsigned int timeout, ide_expiry_t *expiry)
 938 {
 939         unsigned long flags;
 940         spin_lock_irqsave(&ide_lock, flags);
 941         __ide_set_handler(drive, handler, timeout, expiry);
 942         spin_unlock_irqrestore(&ide_lock, flags);
 943 }
 944
 945 EXPORT_SYMBOL(ide_set_handler);
 946
 947 /**
 948  *      ide_execute_command     -       execute an IDE command
 949  *      @drive: IDE drive to issue the command against
 950  *      @command: command byte to write
 951  *      @handler: handler for next phase
 952  *      @timeout: timeout for command
 953  *      @expiry:  handler to run on timeout
 954  *
 955  *      Helper function to issue an IDE command. This handles the
 956  *      atomicity requirements, command timing and ensures that the
 957  *      handler and IRQ setup do not race. All IDE command kick off
 958  *      should go via this function or do equivalent locking.
 959  */
 960
 961 void ide_execute_command(ide_drive_t *drive, task_ioreg_t cmd, ide_handler_t *handler, unsigned timeout, ide_expiry_t *expiry)
 962 {
 963         unsigned long flags;
 964         ide_hwgroup_t *hwgroup = HWGROUP(drive);
 965         ide_hwif_t *hwif = HWIF(drive);
 966
 967         spin_lock_irqsave(&ide_lock, flags);
 968
 969         BUG_ON(hwgroup->handler);
 970         hwgroup->handler        = handler;
 971         hwgroup->expiry         = expiry;
 972         hwgroup->timer.expires  = jiffies + timeout;
 973         hwgroup->req_gen_timer = hwgroup->req_gen;
 974         add_timer(&hwgroup->timer);
 975         hwif->OUTBSYNC(drive, cmd, IDE_COMMAND_REG);
 976         /* Drive takes 400nS to respond, we must avoid the IRQ being
 977            serviced before that.
 978
 979            FIXME: we could skip this delay with care on non shared
 980            devices
 981         */
 982         ndelay(400);
 983         spin_unlock_irqrestore(&ide_lock, flags);
 984 }
 985
 986 EXPORT_SYMBOL(ide_execute_command);
 987
 988
 989 /* needed below */
 990 static ide_startstop_t do_reset1 (ide_drive_t *, int);
 991
 992 /*
 993  * atapi_reset_pollfunc() gets invoked to poll the interface for completion every 50ms
 994  * during an atapi drive reset operation. If the drive has not yet responded,
 995  * and we have not yet hit our maximum waiting time, then the timer is restarted
 996  * for another 50ms.
 997  */
 998 static ide_startstop_t atapi_reset_pollfunc (ide_drive_t *drive)
 999 {
1000         ide_hwgroup_t *hwgroup  = HWGROUP(drive);
1001         ide_hwif_t *hwif        = HWIF(drive);
1002         u8 stat;
1003
1004         SELECT_DRIVE(drive);
1005         udelay (10);
1006
1007         if (OK_STAT(stat = hwif->INB(IDE_STATUS_REG), 0, BUSY_STAT)) {
1008                 printk("%s: ATAPI reset complete\n", drive->name);
1009         } else {
1010                 if (time_before(jiffies, hwgroup->poll_timeout)) {
1011                         BUG_ON(HWGROUP(drive)->handler != NULL);
1012                         ide_set_handler(drive, &atapi_reset_pollfunc, HZ/20, NULL);
1013                         /* continue polling */
1014                         return ide_started;
1015                 }
1016                 /* end of polling */
1017                 hwgroup->polling = 0;
1018                 printk("%s: ATAPI reset timed-out, status=0x%02x\n",
1019                                 drive->name, stat);
1020                 /* do it the old fashioned way */
1021                 return do_reset1(drive, 1);
1022         }
1023         /* done polling */
1024         hwgroup->polling = 0;
1025         hwgroup->resetting = 0;
1026         return ide_stopped;
1027 }
1028
1029 /*
1030  * reset_pollfunc() gets invoked to poll the interface for completion every 50ms
1031  * during an ide reset operation. If the drives have not yet responded,
1032  * and we have not yet hit our maximum waiting time, then the timer is restarted
1033  * for another 50ms.
1034  */
1035 static ide_startstop_t reset_pollfunc (ide_drive_t *drive)
1036 {
1037         ide_hwgroup_t *hwgroup  = HWGROUP(drive);
1038         ide_hwif_t *hwif        = HWIF(drive);
1039         u8 tmp;
1040
1041         if (hwif->reset_poll != NULL) {
1042                 if (hwif->reset_poll(drive)) {
1043                         printk(KERN_ERR "%s: host reset_poll failure for %s.\n",
1044                                 hwif->name, drive->name);
1045                         return ide_stopped;
1046                 }
1047         }
1048
1049         if (!OK_STAT(tmp = hwif->INB(IDE_STATUS_REG), 0, BUSY_STAT)) {
1050                 if (time_before(jiffies, hwgroup->poll_timeout)) {
1051                         BUG_ON(HWGROUP(drive)->handler != NULL);
1052                         ide_set_handler(drive, &reset_pollfunc, HZ/20, NULL);
1053                         /* continue polling */
1054                         return ide_started;
1055                 }
1056                 printk("%s: reset timed-out, status=0x%02x\n", hwif->name, tmp);
1057                 drive->failures++;
1058         } else  {
1059                 printk("%s: reset: ", hwif->name);
1060                 if ((tmp = hwif->INB(IDE_ERROR_REG)) == 1) {
1061                         printk("success\n");
1062                         drive->failures = 0;
1063                 } else {
1064                         drive->failures++;
1065                         printk("master: ");
1066                         switch (tmp & 0x7f) {
1067                                 case 1: printk("passed");
1068                                         break;
1069                                 case 2: printk("formatter device error");
1070                                         break;
1071                                 case 3: printk("sector buffer error");
1072                                         break;
1073                                 case 4: printk("ECC circuitry error");
1074                                         break;
1075                                 case 5: printk("controlling MPU error");
1076                                         break;
1077                                 default:printk("error (0x%02x?)", tmp);
1078                         }
1079                         if (tmp & 0x80)
1080                                 printk("; slave: failed");
1081                         printk("\n");
1082                 }
1083         }
1084         hwgroup->polling = 0;   /* done polling */
1085         hwgroup->resetting = 0; /* done reset attempt */
1086         return ide_stopped;
1087 }
1088
1089 static void check_dma_crc(ide_drive_t *drive)
1090 {
1091 #ifdef CONFIG_BLK_DEV_IDEDMA
1092         if (drive->crc_count) {
1093                 drive->hwif->dma_off_quietly(drive);
1094                 ide_set_xfer_rate(drive, ide_auto_reduce_xfer(drive));
1095                 if (drive->current_speed >= XFER_SW_DMA_0)
1096                         (void) HWIF(drive)->ide_dma_on(drive);
1097         } else
1098                 ide_dma_off(drive);
1099 #endif
1100 }
1101
1102 static void ide_disk_pre_reset(ide_drive_t *drive)
1103 {
1104         int legacy = (drive->id->cfs_enable_2 & 0x0400) ? 0 : 1;
1105
1106         drive->special.all = 0;
1107         drive->special.b.set_geometry = legacy;
1108         drive->special.b.recalibrate  = legacy;
1109         if (OK_TO_RESET_CONTROLLER)
1110                 drive->mult_count = 0;
1111         if (!drive->keep_settings && !drive->using_dma)
1112                 drive->mult_req = 0;
1113         if (drive->mult_req != drive->mult_count)
1114                 drive->special.b.set_multmode = 1;
1115 }
1116
1117 static void pre_reset(ide_drive_t *drive)
1118 {
1119         if (drive->media == ide_disk)
1120                 ide_disk_pre_reset(drive);
1121         else
1122                 drive->post_reset = 1;
1123
1124         if (!drive->keep_settings) {
1125                 if (drive->using_dma) {
1126                         check_dma_crc(drive);
1127                 } else {
1128                         drive->unmask = 0;
1129                         drive->io_32bit = 0;
1130                 }
1131                 return;
1132         }
1133         if (drive->using_dma)
1134                 check_dma_crc(drive);
1135
1136         if (HWIF(drive)->pre_reset != NULL)
1137                 HWIF(drive)->pre_reset(drive);
1138
1139         if (drive->current_speed != 0xff)
1140                 drive->desired_speed = drive->current_speed;
1141         drive->current_speed = 0xff;
1142 }
1143
1144 /*
1145  * do_reset1() attempts to recover a confused drive by resetting it.
1146  * Unfortunately, resetting a disk drive actually resets all devices on
1147  * the same interface, so it can really be thought of as resetting the
1148  * interface rather than resetting the drive.
1149  *
1150  * ATAPI devices have their own reset mechanism which allows them to be
1151  * individually reset without clobbering other devices on the same interface.
1152  *
1153  * Unfortunately, the IDE interface does not generate an interrupt to let
1154  * us know when the reset operation has finished, so we must poll for this.
1155  * Equally poor, though, is the fact that this may a very long time to complete,
1156  * (up to 30 seconds worstcase).  So, instead of busy-waiting here for it,
1157  * we set a timer to poll at 50ms intervals.
1158  */
1159 static ide_startstop_t do_reset1 (ide_drive_t *drive, int do_not_try_atapi)
1160 {
1161         unsigned int unit;
1162         unsigned long flags;
1163         ide_hwif_t *hwif;
1164         ide_hwgroup_t *hwgroup;
1165
1166         spin_lock_irqsave(&ide_lock, flags);
1167         hwif = HWIF(drive);
1168         hwgroup = HWGROUP(drive);
1169
1170         /* We must not reset with running handlers */
1171         BUG_ON(hwgroup->handler != NULL);
1172
1173         /* For an ATAPI device, first try an ATAPI SRST. */
1174         if (drive->media != ide_disk && !do_not_try_atapi) {
1175                 hwgroup->resetting = 1;
1176                 pre_reset(drive);
1177                 SELECT_DRIVE(drive);
1178                 udelay (20);
1179                 hwif->OUTBSYNC(drive, WIN_SRST, IDE_COMMAND_REG);
1180                 ndelay(400);
1181                 hwgroup->poll_timeout = jiffies + WAIT_WORSTCASE;
1182                 hwgroup->polling = 1;
1183                 __ide_set_handler(drive, &atapi_reset_pollfunc, HZ/20, NULL);
1184                 spin_unlock_irqrestore(&ide_lock, flags);
1185                 return ide_started;
1186         }
1187
1188         /*
1189          * First, reset any device state data we were maintaining
1190          * for any of the drives on this interface.
1191          */
1192         for (unit = 0; unit < MAX_DRIVES; ++unit)
1193                 pre_reset(&hwif->drives[unit]);
1194
1195 #if OK_TO_RESET_CONTROLLER
1196         if (!IDE_CONTROL_REG) {
1197                 spin_unlock_irqrestore(&ide_lock, flags);
1198                 return ide_stopped;
1199         }
1200
1201         hwgroup->resetting = 1;
1202         /*
1203          * Note that we also set nIEN while resetting the device,
1204          * to mask unwanted interrupts from the interface during the reset.
1205          * However, due to the design of PC hardware, this will cause an
1206          * immediate interrupt due to the edge transition it produces.
1207          * This single interrupt gives us a "fast poll" for drives that
1208          * recover from reset very quickly, saving us the first 50ms wait time.
1209          */
1210         /* set SRST and nIEN */
1211         hwif->OUTBSYNC(drive, drive->ctl|6,IDE_CONTROL_REG);
1212         /* more than enough time */
1213         udelay(10);
1214         if (drive->quirk_list == 2) {
1215                 /* clear SRST and nIEN */
1216                 hwif->OUTBSYNC(drive, drive->ctl, IDE_CONTROL_REG);
1217         } else {
1218                 /* clear SRST, leave nIEN */
1219                 hwif->OUTBSYNC(drive, drive->ctl|2, IDE_CONTROL_REG);
1220         }
1221         /* more than enough time */
1222         udelay(10);
1223         hwgroup->poll_timeout = jiffies + WAIT_WORSTCASE;
1224         hwgroup->polling = 1;
1225         __ide_set_handler(drive, &reset_pollfunc, HZ/20, NULL);
1226
1227         /*
1228          * Some weird controller like resetting themselves to a strange
1229          * state when the disks are reset this way. At least, the Winbond
1230          * 553 documentation says that
1231          */
1232         if (hwif->resetproc != NULL) {
1233                 hwif->resetproc(drive);
1234         }
1235
1236 #endif  /* OK_TO_RESET_CONTROLLER */
1237
1238         spin_unlock_irqrestore(&ide_lock, flags);
1239         return ide_started;
1240 }
1241
1242 /*
1243  * ide_do_reset() is the entry point to the drive/interface reset code.
1244  */
1245
1246 ide_startstop_t ide_do_reset (ide_drive_t *drive)
1247 {
1248         return do_reset1(drive, 0);
1249 }
1250
1251 EXPORT_SYMBOL(ide_do_reset);
1252
1253 /*
1254  * ide_wait_not_busy() waits for the currently selected device on the hwif
1255  * to report a non-busy status, see comments in probe_hwif().
1256  */
1257 int ide_wait_not_busy(ide_hwif_t *hwif, unsigned long timeout)
1258 {
1259         u8 stat = 0;
1260
1261         while(timeout--) {
1262                 /*
1263                  * Turn this into a schedule() sleep once I'm sure
1264                  * about locking issues (2.5 work ?).
1265                  */
1266                 mdelay(1);
1267                 stat = hwif->INB(hwif->io_ports[IDE_STATUS_OFFSET]);
1268                 if ((stat & BUSY_STAT) == 0)
1269                         return 0;
1270                 /*
1271                  * Assume a value of 0xff means nothing is connected to
1272                  * the interface and it doesn't implement the pull-down
1273                  * resistor on D7.
1274                  */
1275                 if (stat == 0xff)
1276                         return -ENODEV;
1277                 touch_softlockup_watchdog();
1278                 touch_nmi_watchdog();
1279         }
1280         return -EBUSY;
1281 }
1282
1283 EXPORT_SYMBOL_GPL(ide_wait_not_busy);
1284