4 * Copyright (C) 1994-1996 Scott Snyder <snyder@fnald0.fnal.gov>
5 * Copyright (C) 1996-1998 Erik Andersen <andersee@debian.org>
6 * Copyright (C) 1998-2000 Jens Axboe <axboe@suse.de>
7 * Copyright (C) 2005, 2007 Bartlomiej Zolnierkiewicz
9 * May be copied or modified under the terms of the GNU General Public
10 * License. See linux/COPYING for more information.
12 * See Documentation/cdrom/ide-cd for usage information.
14 * Suggestions are welcome. Patches that work are more welcome though. ;-)
15 * For those wishing to work on this driver, please be sure you download
16 * and comply with the latest Mt. Fuji (SFF8090 version 4) and ATAPI
17 * (SFF-8020i rev 2.6) standards. These documents can be obtained by
19 * ftp://fission.dt.wdc.com/pub/standards/SFF_atapi/spec/SFF8020-r2.6/PS/8020r26.ps
20 * ftp://ftp.avc-pioneer.com/Mtfuji4/Spec/Fuji4r10.pdf
22 * For historical changelog please see:
23 * Documentation/ide/ChangeLog.ide-cd.1994-2004
26 #define IDECD_VERSION "5.00"
28 #include <linux/module.h>
29 #include <linux/types.h>
30 #include <linux/kernel.h>
31 #include <linux/delay.h>
32 #include <linux/timer.h>
33 #include <linux/slab.h>
34 #include <linux/interrupt.h>
35 #include <linux/errno.h>
36 #include <linux/cdrom.h>
37 #include <linux/ide.h>
38 #include <linux/completion.h>
39 #include <linux/mutex.h>
40 #include <linux/bcd.h>
42 /* For SCSI -> ATAPI command conversion */
43 #include <scsi/scsi.h>
45 #include <linux/irq.h>
47 #include <asm/byteorder.h>
48 #include <linux/uaccess.h>
49 #include <asm/unaligned.h>
53 static DEFINE_MUTEX(idecd_ref_mutex);
55 #define to_ide_cd(obj) container_of(obj, struct cdrom_info, kref)
57 #define ide_cd_g(disk) \
58 container_of((disk)->private_data, struct cdrom_info, driver)
60 static void ide_cd_release(struct kref *);
62 static struct cdrom_info *ide_cd_get(struct gendisk *disk)
64 struct cdrom_info *cd = NULL;
66 mutex_lock(&idecd_ref_mutex);
69 if (ide_device_get(cd->drive))
75 mutex_unlock(&idecd_ref_mutex);
79 static void ide_cd_put(struct cdrom_info *cd)
81 ide_drive_t *drive = cd->drive;
83 mutex_lock(&idecd_ref_mutex);
84 kref_put(&cd->kref, ide_cd_release);
85 ide_device_put(drive);
86 mutex_unlock(&idecd_ref_mutex);
90 * Generic packet command support and error handling routines.
93 /* Mark that we've seen a media change and invalidate our internal buffers. */
94 static void cdrom_saw_media_change(ide_drive_t *drive)
96 drive->atapi_flags |= IDE_AFLAG_MEDIA_CHANGED;
97 drive->atapi_flags &= ~IDE_AFLAG_TOC_VALID;
100 static int cdrom_log_sense(ide_drive_t *drive, struct request *rq,
101 struct request_sense *sense)
105 if (!sense || !rq || (rq->cmd_flags & REQ_QUIET))
108 switch (sense->sense_key) {
110 case RECOVERED_ERROR:
114 * don't care about tray state messages for e.g. capacity
115 * commands or in-progress or becoming ready
117 if (sense->asc == 0x3a || sense->asc == 0x04)
121 case ILLEGAL_REQUEST:
123 * don't log START_STOP unit with LoEj set, since we cannot
124 * reliably check if drive can auto-close
126 if (rq->cmd[0] == GPCMD_START_STOP_UNIT && sense->asc == 0x24)
132 * Make good and sure we've seen this potential media change.
133 * Some drives (i.e. Creative) fail to present the correct sense
134 * key in the error register.
136 cdrom_saw_media_change(drive);
145 static void cdrom_analyze_sense_data(ide_drive_t *drive,
146 struct request *failed_command,
147 struct request_sense *sense)
149 unsigned long sector;
150 unsigned long bio_sectors;
151 struct cdrom_info *info = drive->driver_data;
153 if (!cdrom_log_sense(drive, failed_command, sense))
157 * If a read toc is executed for a CD-R or CD-RW medium where the first
158 * toc has not been recorded yet, it will fail with 05/24/00 (which is a
161 if (failed_command && failed_command->cmd[0] == GPCMD_READ_TOC_PMA_ATIP)
162 if (sense->sense_key == 0x05 && sense->asc == 0x24)
166 if (sense->error_code == 0x70) {
167 switch (sense->sense_key) {
169 case VOLUME_OVERFLOW:
170 case ILLEGAL_REQUEST:
173 if (failed_command == NULL ||
174 !blk_fs_request(failed_command))
176 sector = (sense->information[0] << 24) |
177 (sense->information[1] << 16) |
178 (sense->information[2] << 8) |
179 (sense->information[3]);
181 if (drive->queue->hardsect_size == 2048)
182 /* device sector size is 2K */
185 bio_sectors = max(bio_sectors(failed_command->bio), 4U);
186 sector &= ~(bio_sectors - 1);
188 if (sector < get_capacity(info->disk) &&
189 drive->probed_capacity - sector < 4 * 75)
190 set_capacity(info->disk, sector);
194 ide_cd_log_error(drive->name, failed_command, sense);
197 static void cdrom_queue_request_sense(ide_drive_t *drive, void *sense,
198 struct request *failed_command)
200 struct cdrom_info *info = drive->driver_data;
201 struct request *rq = &info->request_sense_request;
204 sense = &info->sense_data;
206 /* stuff the sense request in front of our current request */
207 blk_rq_init(NULL, rq);
208 rq->cmd_type = REQ_TYPE_ATA_PC;
209 rq->rq_disk = info->disk;
212 rq->cmd[0] = GPCMD_REQUEST_SENSE;
216 rq->cmd_type = REQ_TYPE_SENSE;
217 rq->cmd_flags |= REQ_PREEMPT;
219 /* NOTE! Save the failed command in "rq->buffer" */
220 rq->buffer = (void *) failed_command;
222 ide_do_drive_cmd(drive, rq);
225 static void cdrom_end_request(ide_drive_t *drive, int uptodate)
227 struct request *rq = HWGROUP(drive)->rq;
228 int nsectors = rq->hard_cur_sectors;
230 if (blk_sense_request(rq) && uptodate) {
232 * For REQ_TYPE_SENSE, "rq->buffer" points to the original
235 struct request *failed = (struct request *) rq->buffer;
236 struct cdrom_info *info = drive->driver_data;
237 void *sense = &info->sense_data;
242 sense = failed->sense;
243 failed->sense_len = rq->sense_len;
245 cdrom_analyze_sense_data(drive, failed, sense);
247 * now end the failed request
249 if (blk_fs_request(failed)) {
250 if (ide_end_dequeued_request(drive, failed, 0,
251 failed->hard_nr_sectors))
254 spin_lock_irqsave(&ide_lock, flags);
255 if (__blk_end_request(failed, -EIO,
258 spin_unlock_irqrestore(&ide_lock, flags);
261 cdrom_analyze_sense_data(drive, NULL, sense);
264 if (!rq->current_nr_sectors && blk_fs_request(rq))
266 /* make sure it's fully ended */
267 if (blk_pc_request(rq))
268 nsectors = (rq->data_len + 511) >> 9;
272 ide_end_request(drive, uptodate, nsectors);
275 static void ide_dump_status_no_sense(ide_drive_t *drive, const char *msg, u8 st)
279 ide_dump_status(drive, msg, st);
284 * 0: if the request should be continued.
285 * 1: if the request was ended.
287 static int cdrom_decode_status(ide_drive_t *drive, int good_stat, int *stat_ret)
289 ide_hwif_t *hwif = drive->hwif;
290 struct request *rq = hwif->hwgroup->rq;
291 int stat, err, sense_key;
293 /* check for errors */
294 stat = hwif->tp_ops->read_status(hwif);
299 if (OK_STAT(stat, good_stat, BAD_R_STAT))
302 /* get the IDE error register */
303 err = ide_read_error(drive);
304 sense_key = err >> 4;
307 printk(KERN_ERR "%s: missing rq in %s\n",
308 drive->name, __func__);
312 if (blk_sense_request(rq)) {
314 * We got an error trying to get sense info from the drive
315 * (probably while trying to recover from a former error).
318 rq->cmd_flags |= REQ_FAILED;
319 cdrom_end_request(drive, 0);
320 ide_error(drive, "request sense failure", stat);
323 } else if (blk_pc_request(rq) || rq->cmd_type == REQ_TYPE_ATA_PC) {
324 /* All other functions, except for READ. */
327 * if we have an error, pass back CHECK_CONDITION as the
330 if (blk_pc_request(rq) && !rq->errors)
331 rq->errors = SAM_STAT_CHECK_CONDITION;
333 /* check for tray open */
334 if (sense_key == NOT_READY) {
335 cdrom_saw_media_change(drive);
336 } else if (sense_key == UNIT_ATTENTION) {
337 /* check for media change */
338 cdrom_saw_media_change(drive);
340 } else if (sense_key == ILLEGAL_REQUEST &&
341 rq->cmd[0] == GPCMD_START_STOP_UNIT) {
343 * Don't print error message for this condition--
344 * SFF8090i indicates that 5/24/00 is the correct
345 * response to a request to close the tray if the
346 * drive doesn't have that capability.
347 * cdrom_log_sense() knows this!
349 } else if (!(rq->cmd_flags & REQ_QUIET)) {
350 /* otherwise, print an error */
351 ide_dump_status(drive, "packet command error", stat);
354 rq->cmd_flags |= REQ_FAILED;
357 * instead of playing games with moving completions around,
358 * remove failed request completely and end it when the
359 * request sense has completed
363 } else if (blk_fs_request(rq)) {
364 int do_end_request = 0;
366 /* handle errors from READ and WRITE requests */
368 if (blk_noretry_request(rq))
371 if (sense_key == NOT_READY) {
373 if (rq_data_dir(rq) == READ) {
374 cdrom_saw_media_change(drive);
376 /* fail the request */
377 printk(KERN_ERR "%s: tray open\n", drive->name);
380 struct cdrom_info *info = drive->driver_data;
383 * Allow the drive 5 seconds to recover, some
384 * devices will return this error while flushing
388 info->write_timeout = jiffies +
389 ATAPI_WAIT_WRITE_BUSY;
391 if (time_after(jiffies, info->write_timeout))
397 * take a breather relying on the unplug
398 * timer to kick us again
400 spin_lock_irqsave(&ide_lock, flags);
401 blk_plug_device(drive->queue);
402 spin_unlock_irqrestore(&ide_lock,
407 } else if (sense_key == UNIT_ATTENTION) {
409 cdrom_saw_media_change(drive);
412 * Arrange to retry the request but be sure to give up
413 * if we've retried too many times.
415 if (++rq->errors > ERROR_MAX)
417 } else if (sense_key == ILLEGAL_REQUEST ||
418 sense_key == DATA_PROTECT) {
420 * No point in retrying after an illegal request or data
423 ide_dump_status_no_sense(drive, "command error", stat);
425 } else if (sense_key == MEDIUM_ERROR) {
427 * No point in re-trying a zillion times on a bad
428 * sector. If we got here the error is not correctable.
430 ide_dump_status_no_sense(drive,
431 "media error (bad sector)",
434 } else if (sense_key == BLANK_CHECK) {
435 /* disk appears blank ?? */
436 ide_dump_status_no_sense(drive, "media error (blank)",
439 } else if ((err & ~ABRT_ERR) != 0) {
440 /* go to the default handler for other errors */
441 ide_error(drive, "cdrom_decode_status", stat);
443 } else if ((++rq->errors > ERROR_MAX)) {
444 /* we've racked up too many retries, abort */
449 * End a request through request sense analysis when we have
450 * sense data. We need this in order to perform end of media
457 * If we got a CHECK_CONDITION status, queue
458 * a request sense command.
461 cdrom_queue_request_sense(drive, NULL, NULL);
463 blk_dump_rq_flags(rq, "ide-cd: bad rq");
464 cdrom_end_request(drive, 0);
467 /* retry, or handle the next request */
471 if (stat & ERR_STAT) {
474 spin_lock_irqsave(&ide_lock, flags);
475 blkdev_dequeue_request(rq);
476 HWGROUP(drive)->rq = NULL;
477 spin_unlock_irqrestore(&ide_lock, flags);
479 cdrom_queue_request_sense(drive, rq->sense, rq);
481 cdrom_end_request(drive, 0);
486 static int cdrom_timer_expiry(ide_drive_t *drive)
488 struct request *rq = HWGROUP(drive)->rq;
489 unsigned long wait = 0;
492 * Some commands are *slow* and normally take a long time to complete.
493 * Usually we can use the ATAPI "disconnect" to bypass this, but not all
494 * commands/drives support that. Let ide_timer_expiry keep polling us
497 switch (rq->cmd[0]) {
499 case GPCMD_FORMAT_UNIT:
500 case GPCMD_RESERVE_RZONE_TRACK:
501 case GPCMD_CLOSE_TRACK:
502 case GPCMD_FLUSH_CACHE:
503 wait = ATAPI_WAIT_PC;
506 if (!(rq->cmd_flags & REQ_QUIET))
507 printk(KERN_INFO "ide-cd: cmd 0x%x timed out\n",
516 * Set up the device registers for transferring a packet command on DEV,
517 * expecting to later transfer XFERLEN bytes. HANDLER is the routine
518 * which actually transfers the command to the drive. If this is a
519 * drq_interrupt device, this routine will arrange for HANDLER to be
520 * called when the interrupt from the drive arrives. Otherwise, HANDLER
521 * will be called immediately after the drive is prepared for the transfer.
523 static ide_startstop_t cdrom_start_packet_command(ide_drive_t *drive,
525 ide_handler_t *handler)
527 struct cdrom_info *info = drive->driver_data;
528 ide_hwif_t *hwif = drive->hwif;
530 /* FIXME: for Virtual DMA we must check harder */
532 info->dma = !hwif->dma_ops->dma_setup(drive);
534 /* set up the controller registers */
535 ide_pktcmd_tf_load(drive, IDE_TFLAG_OUT_NSECT | IDE_TFLAG_OUT_LBAL,
538 if (drive->atapi_flags & IDE_AFLAG_DRQ_INTERRUPT) {
539 /* waiting for CDB interrupt, not DMA yet. */
541 drive->waiting_for_dma = 0;
544 ide_execute_command(drive, WIN_PACKETCMD, handler,
545 ATAPI_WAIT_PC, cdrom_timer_expiry);
548 ide_execute_pkt_cmd(drive);
550 return (*handler) (drive);
555 * Send a packet command to DRIVE described by CMD_BUF and CMD_LEN. The device
556 * registers must have already been prepared by cdrom_start_packet_command.
557 * HANDLER is the interrupt handler to call when the command completes or
558 * there's data ready.
560 #define ATAPI_MIN_CDB_BYTES 12
561 static ide_startstop_t cdrom_transfer_packet_command(ide_drive_t *drive,
563 ide_handler_t *handler)
565 ide_hwif_t *hwif = drive->hwif;
567 struct cdrom_info *info = drive->driver_data;
568 ide_startstop_t startstop;
570 if (drive->atapi_flags & IDE_AFLAG_DRQ_INTERRUPT) {
572 * Here we should have been called after receiving an interrupt
573 * from the device. DRQ should how be set.
576 /* check for errors */
577 if (cdrom_decode_status(drive, DRQ_STAT, NULL))
580 /* ok, next interrupt will be DMA interrupt */
582 drive->waiting_for_dma = 1;
584 /* otherwise, we must wait for DRQ to get set */
585 if (ide_wait_stat(&startstop, drive, DRQ_STAT,
586 BUSY_STAT, WAIT_READY))
590 /* arm the interrupt handler */
591 ide_set_handler(drive, handler, rq->timeout, cdrom_timer_expiry);
593 /* ATAPI commands get padded out to 12 bytes minimum */
594 cmd_len = COMMAND_SIZE(rq->cmd[0]);
595 if (cmd_len < ATAPI_MIN_CDB_BYTES)
596 cmd_len = ATAPI_MIN_CDB_BYTES;
598 /* send the command to the device */
599 hwif->tp_ops->output_data(drive, NULL, rq->cmd, cmd_len);
601 /* start the DMA if need be */
603 hwif->dma_ops->dma_start(drive);
609 * Check the contents of the interrupt reason register from the cdrom
610 * and attempt to recover if there are problems. Returns 0 if everything's
611 * ok; nonzero if the request has been terminated.
613 static int ide_cd_check_ireason(ide_drive_t *drive, struct request *rq,
614 int len, int ireason, int rw)
616 ide_hwif_t *hwif = drive->hwif;
619 * ireason == 0: the drive wants to receive data from us
620 * ireason == 2: the drive is expecting to transfer data to us
622 if (ireason == (!rw << 1))
624 else if (ireason == (rw << 1)) {
627 printk(KERN_ERR "%s: %s: wrong transfer direction!\n",
628 drive->name, __func__);
630 ide_pad_transfer(drive, rw, len);
631 } else if (rw == 0 && ireason == 1) {
633 * Some drives (ASUS) seem to tell us that status info is
634 * available. Just get it and ignore.
636 (void)hwif->tp_ops->read_status(hwif);
639 /* drive wants a command packet, or invalid ireason... */
640 printk(KERN_ERR "%s: %s: bad interrupt reason 0x%02x\n",
641 drive->name, __func__, ireason);
644 if (rq->cmd_type == REQ_TYPE_ATA_PC)
645 rq->cmd_flags |= REQ_FAILED;
647 cdrom_end_request(drive, 0);
652 * Assume that the drive will always provide data in multiples of at least
653 * SECTOR_SIZE, as it gets hairy to keep track of the transfers otherwise.
655 static int ide_cd_check_transfer_size(ide_drive_t *drive, int len)
657 if ((len % SECTOR_SIZE) == 0)
660 printk(KERN_ERR "%s: %s: Bad transfer size %d\n",
661 drive->name, __func__, len);
663 if (drive->atapi_flags & IDE_AFLAG_LIMIT_NFRAMES)
664 printk(KERN_ERR " This drive is not supported by "
665 "this version of the driver\n");
667 printk(KERN_ERR " Trying to limit transfer sizes\n");
668 drive->atapi_flags |= IDE_AFLAG_LIMIT_NFRAMES;
674 static ide_startstop_t cdrom_newpc_intr(ide_drive_t *);
676 static ide_startstop_t ide_cd_prepare_rw_request(ide_drive_t *drive,
679 if (rq_data_dir(rq) == READ) {
680 unsigned short sectors_per_frame =
681 queue_hardsect_size(drive->queue) >> SECTOR_BITS;
682 int nskip = rq->sector & (sectors_per_frame - 1);
685 * If the requested sector doesn't start on a frame boundary,
686 * we must adjust the start of the transfer so that it does,
687 * and remember to skip the first few sectors.
689 * If the rq->current_nr_sectors field is larger than the size
690 * of the buffer, it will mean that we're to skip a number of
691 * sectors equal to the amount by which rq->current_nr_sectors
692 * is larger than the buffer size.
695 /* sanity check... */
696 if (rq->current_nr_sectors !=
697 bio_cur_sectors(rq->bio)) {
698 printk(KERN_ERR "%s: %s: buffer botch (%u)\n",
699 drive->name, __func__,
700 rq->current_nr_sectors);
701 cdrom_end_request(drive, 0);
704 rq->current_nr_sectors += nskip;
709 /* the immediate bit */
712 /* set up the command */
713 rq->timeout = ATAPI_WAIT_PC;
719 * Routine to send a read/write packet command to the drive. This is usually
720 * called directly from cdrom_start_{read,write}(). However, for drq_interrupt
721 * devices, it is called from an interrupt when the drive is ready to accept
724 static ide_startstop_t cdrom_start_rw_cont(ide_drive_t *drive)
726 struct request *rq = drive->hwif->hwgroup->rq;
728 /* send the command to the drive and return */
729 return cdrom_transfer_packet_command(drive, rq, cdrom_newpc_intr);
732 #define IDECD_SEEK_THRESHOLD (1000) /* 1000 blocks */
733 #define IDECD_SEEK_TIMER (5 * WAIT_MIN_SLEEP) /* 100 ms */
734 #define IDECD_SEEK_TIMEOUT (2 * WAIT_CMD) /* 20 sec */
736 static ide_startstop_t cdrom_seek_intr(ide_drive_t *drive)
738 struct cdrom_info *info = drive->driver_data;
740 static int retry = 10;
742 if (cdrom_decode_status(drive, 0, &stat))
745 drive->atapi_flags |= IDE_AFLAG_SEEKING;
747 if (retry && time_after(jiffies, info->start_seek + IDECD_SEEK_TIMER)) {
749 drive->dsc_overlap = 0;
754 static void ide_cd_prepare_seek_request(ide_drive_t *drive, struct request *rq)
756 sector_t frame = rq->sector;
758 sector_div(frame, queue_hardsect_size(drive->queue) >> SECTOR_BITS);
760 memset(rq->cmd, 0, BLK_MAX_CDB);
761 rq->cmd[0] = GPCMD_SEEK;
762 put_unaligned(cpu_to_be32(frame), (unsigned int *) &rq->cmd[2]);
764 rq->timeout = ATAPI_WAIT_PC;
767 static ide_startstop_t cdrom_start_seek_continuation(ide_drive_t *drive)
769 struct request *rq = drive->hwif->hwgroup->rq;
771 return cdrom_transfer_packet_command(drive, rq, &cdrom_seek_intr);
775 * Fix up a possibly partially-processed request so that we can start it over
776 * entirely, or even put it back on the request queue.
778 static void restore_request(struct request *rq)
780 if (rq->buffer != bio_data(rq->bio)) {
782 (rq->buffer - (char *)bio_data(rq->bio)) / SECTOR_SIZE;
784 rq->buffer = bio_data(rq->bio);
788 rq->current_nr_sectors = bio_cur_sectors(rq->bio);
789 rq->hard_cur_sectors = rq->current_nr_sectors;
790 rq->hard_nr_sectors = rq->nr_sectors;
791 rq->hard_sector = rq->sector;
792 rq->q->prep_rq_fn(rq->q, rq);
796 * All other packet commands.
798 static void ide_cd_request_sense_fixup(struct request *rq)
801 * Some of the trailing request sense fields are optional,
802 * and some drives don't send them. Sigh.
804 if (rq->cmd[0] == GPCMD_REQUEST_SENSE &&
805 rq->data_len > 0 && rq->data_len <= 5)
806 while (rq->data_len > 0) {
807 *(u8 *)rq->data++ = 0;
812 int ide_cd_queue_pc(ide_drive_t *drive, const unsigned char *cmd,
813 int write, void *buffer, unsigned *bufflen,
814 struct request_sense *sense, int timeout,
815 unsigned int cmd_flags)
817 struct cdrom_info *info = drive->driver_data;
818 struct request_sense local_sense;
820 unsigned int flags = 0;
823 sense = &local_sense;
825 /* start of retry loop */
830 rq = blk_get_request(drive->queue, write, __GFP_WAIT);
832 memcpy(rq->cmd, cmd, BLK_MAX_CDB);
833 rq->cmd_type = REQ_TYPE_ATA_PC;
835 rq->cmd_flags |= cmd_flags;
836 rq->timeout = timeout;
839 rq->data_len = *bufflen;
842 error = blk_execute_rq(drive->queue, info->disk, rq, 0);
845 *bufflen = rq->data_len;
847 flags = rq->cmd_flags;
851 * FIXME: we should probably abort/retry or something in case of
854 if (flags & REQ_FAILED) {
856 * The request failed. Retry if it was due to a unit
857 * attention status (usually means media was changed).
859 struct request_sense *reqbuf = sense;
861 if (reqbuf->sense_key == UNIT_ATTENTION)
862 cdrom_saw_media_change(drive);
863 else if (reqbuf->sense_key == NOT_READY &&
864 reqbuf->asc == 4 && reqbuf->ascq != 4) {
866 * The drive is in the process of loading
867 * a disk. Retry, but wait a little to give
868 * the drive time to complete the load.
872 /* otherwise, don't retry */
878 /* end of retry loop */
879 } while ((flags & REQ_FAILED) && retries >= 0);
881 /* return an error if the command failed */
882 return (flags & REQ_FAILED) ? -EIO : 0;
886 * Called from blk_end_request_callback() after the data of the request is
887 * completed and before the request itself is completed. By returning value '1',
888 * blk_end_request_callback() returns immediately without completing it.
890 static int cdrom_newpc_intr_dummy_cb(struct request *rq)
895 static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive)
897 ide_hwif_t *hwif = drive->hwif;
898 struct cdrom_info *info = drive->driver_data;
899 struct request *rq = HWGROUP(drive)->rq;
900 xfer_func_t *xferfunc;
901 ide_expiry_t *expiry = NULL;
902 int dma_error = 0, dma, stat, thislen, uptodate = 0;
903 int write = (rq_data_dir(rq) == WRITE) ? 1 : 0;
904 unsigned int timeout;
908 /* check for errors */
912 dma_error = hwif->dma_ops->dma_end(drive);
914 printk(KERN_ERR "%s: DMA %s error\n", drive->name,
915 write ? "write" : "read");
920 if (cdrom_decode_status(drive, 0, &stat))
923 /* using dma, transfer is complete now */
926 return ide_error(drive, "dma error", stat);
927 if (blk_fs_request(rq)) {
928 ide_end_request(drive, 1, rq->nr_sectors);
934 ide_read_bcount_and_ireason(drive, &len, &ireason);
936 thislen = blk_fs_request(rq) ? len : rq->data_len;
940 /* If DRQ is clear, the command has completed. */
941 if ((stat & DRQ_STAT) == 0) {
942 if (blk_fs_request(rq)) {
944 * If we're not done reading/writing, complain.
945 * Otherwise, complete the command normally.
948 if (rq->current_nr_sectors > 0) {
949 printk(KERN_ERR "%s: %s: data underrun "
951 drive->name, __func__,
952 rq->current_nr_sectors);
954 rq->cmd_flags |= REQ_FAILED;
957 cdrom_end_request(drive, uptodate);
959 } else if (!blk_pc_request(rq)) {
960 ide_cd_request_sense_fixup(rq);
961 /* complain if we still have data left to transfer */
962 uptodate = rq->data_len ? 0 : 1;
967 /* check which way to transfer data */
968 if (ide_cd_check_ireason(drive, rq, len, ireason, write))
971 if (blk_fs_request(rq)) {
975 if (ide_cd_check_transfer_size(drive, len)) {
976 cdrom_end_request(drive, 0);
981 * First, figure out if we need to bit-bucket
982 * any of the leading sectors.
984 nskip = min_t(int, rq->current_nr_sectors
985 - bio_cur_sectors(rq->bio),
988 ide_pad_transfer(drive, write, nskip << 9);
989 rq->current_nr_sectors -= nskip;
990 thislen -= (nskip << 9);
997 xferfunc = hwif->tp_ops->output_data;
1000 xferfunc = hwif->tp_ops->input_data;
1004 while (thislen > 0) {
1005 u8 *ptr = blk_fs_request(rq) ? NULL : rq->data;
1006 int blen = rq->data_len;
1010 if (blk_fs_request(rq)) {
1012 blen = rq->current_nr_sectors << 9;
1014 ptr = bio_data(rq->bio);
1015 blen = bio_iovec(rq->bio)->bv_len;
1020 if (blk_fs_request(rq) && !write)
1022 * If the buffers are full, pipe the rest into
1025 ide_pad_transfer(drive, 0, thislen);
1027 printk(KERN_ERR "%s: confused, missing data\n",
1029 blk_dump_rq_flags(rq, rq_data_dir(rq)
1030 ? "cdrom_newpc_intr, write"
1031 : "cdrom_newpc_intr, read");
1039 xferfunc(drive, NULL, ptr, blen);
1044 if (blk_fs_request(rq)) {
1046 rq->nr_sectors -= (blen >> 9);
1047 rq->current_nr_sectors -= (blen >> 9);
1048 rq->sector += (blen >> 9);
1050 if (rq->current_nr_sectors == 0 && rq->nr_sectors)
1051 cdrom_end_request(drive, 1);
1053 rq->data_len -= blen;
1056 * The request can't be completed until DRQ is cleared.
1057 * So complete the data, but don't complete the request
1058 * using the dummy function for the callback feature
1059 * of blk_end_request_callback().
1062 blk_end_request_callback(rq, 0, blen,
1063 cdrom_newpc_intr_dummy_cb);
1067 if (!write && blk_sense_request(rq))
1068 rq->sense_len += blen;
1071 /* pad, if necessary */
1072 if (!blk_fs_request(rq) && len > 0)
1073 ide_pad_transfer(drive, write, len);
1075 if (blk_pc_request(rq)) {
1076 timeout = rq->timeout;
1078 timeout = ATAPI_WAIT_PC;
1079 if (!blk_fs_request(rq))
1080 expiry = cdrom_timer_expiry;
1083 ide_set_handler(drive, cdrom_newpc_intr, timeout, expiry);
1087 if (blk_pc_request(rq)) {
1088 unsigned long flags;
1089 unsigned int dlen = rq->data_len;
1094 spin_lock_irqsave(&ide_lock, flags);
1095 if (__blk_end_request(rq, 0, dlen))
1097 HWGROUP(drive)->rq = NULL;
1098 spin_unlock_irqrestore(&ide_lock, flags);
1101 rq->cmd_flags |= REQ_FAILED;
1102 cdrom_end_request(drive, uptodate);
1107 static ide_startstop_t cdrom_start_rw(ide_drive_t *drive, struct request *rq)
1109 struct cdrom_info *cd = drive->driver_data;
1110 int write = rq_data_dir(rq) == WRITE;
1111 unsigned short sectors_per_frame =
1112 queue_hardsect_size(drive->queue) >> SECTOR_BITS;
1115 /* disk has become write protected */
1116 if (get_disk_ro(cd->disk)) {
1117 cdrom_end_request(drive, 0);
1122 * We may be retrying this request after an error. Fix up any
1123 * weirdness which might be present in the request packet.
1125 restore_request(rq);
1128 /* use DMA, if possible / writes *must* be hardware frame aligned */
1129 if ((rq->nr_sectors & (sectors_per_frame - 1)) ||
1130 (rq->sector & (sectors_per_frame - 1))) {
1132 cdrom_end_request(drive, 0);
1137 cd->dma = drive->using_dma;
1140 cd->devinfo.media_written = 1;
1145 static ide_startstop_t cdrom_do_newpc_cont(ide_drive_t *drive)
1147 struct request *rq = HWGROUP(drive)->rq;
1149 return cdrom_transfer_packet_command(drive, rq, cdrom_newpc_intr);
1152 static void cdrom_do_block_pc(ide_drive_t *drive, struct request *rq)
1154 struct cdrom_info *info = drive->driver_data;
1156 if (blk_pc_request(rq))
1157 rq->cmd_flags |= REQ_QUIET;
1159 rq->cmd_flags &= ~REQ_FAILED;
1164 if (rq->bio || ((rq->cmd_type == REQ_TYPE_ATA_PC) && rq->data_len)) {
1165 struct request_queue *q = drive->queue;
1166 unsigned int alignment;
1168 unsigned long stack_mask = ~(THREAD_SIZE - 1);
1171 addr = (unsigned long)bio_data(rq->bio);
1173 addr = (unsigned long)rq->data;
1175 info->dma = drive->using_dma;
1178 * check if dma is safe
1180 * NOTE! The "len" and "addr" checks should possibly have
1183 alignment = queue_dma_alignment(q) | q->dma_pad_mask;
1184 if (addr & alignment || rq->data_len & alignment)
1187 if (!((addr & stack_mask) ^
1188 ((unsigned long)current->stack & stack_mask)))
1194 * cdrom driver request routine.
1196 static ide_startstop_t ide_cd_do_request(ide_drive_t *drive, struct request *rq,
1199 struct cdrom_info *info = drive->driver_data;
1203 if (blk_fs_request(rq)) {
1204 if (drive->atapi_flags & IDE_AFLAG_SEEKING) {
1205 ide_hwif_t *hwif = drive->hwif;
1206 unsigned long elapsed = jiffies - info->start_seek;
1207 int stat = hwif->tp_ops->read_status(hwif);
1209 if ((stat & SEEK_STAT) != SEEK_STAT) {
1210 if (elapsed < IDECD_SEEK_TIMEOUT) {
1211 ide_stall_queue(drive,
1215 printk(KERN_ERR "%s: DSC timeout\n",
1218 drive->atapi_flags &= ~IDE_AFLAG_SEEKING;
1220 if (rq_data_dir(rq) == READ &&
1221 IDE_LARGE_SEEK(info->last_block, block,
1222 IDECD_SEEK_THRESHOLD) &&
1223 drive->dsc_overlap) {
1225 fn = cdrom_start_seek_continuation;
1228 info->start_seek = jiffies;
1230 ide_cd_prepare_seek_request(drive, rq);
1233 fn = cdrom_start_rw_cont;
1235 if (cdrom_start_rw(drive, rq) == ide_stopped)
1238 if (ide_cd_prepare_rw_request(drive, rq) == ide_stopped)
1241 info->last_block = block;
1242 } else if (blk_sense_request(rq) || blk_pc_request(rq) ||
1243 rq->cmd_type == REQ_TYPE_ATA_PC) {
1244 xferlen = rq->data_len;
1245 fn = cdrom_do_newpc_cont;
1248 rq->timeout = ATAPI_WAIT_PC;
1250 cdrom_do_block_pc(drive, rq);
1251 } else if (blk_special_request(rq)) {
1252 /* right now this can only be a reset... */
1253 cdrom_end_request(drive, 1);
1256 blk_dump_rq_flags(rq, "ide-cd bad flags");
1257 cdrom_end_request(drive, 0);
1261 return cdrom_start_packet_command(drive, xferlen, fn);
1267 * Routines which queue packet commands take as a final argument a pointer to a
1268 * request_sense struct. If execution of the command results in an error with a
1269 * CHECK CONDITION status, this structure will be filled with the results of the
1270 * subsequent request sense command. The pointer can also be NULL, in which case
1271 * no sense information is returned.
1273 static void msf_from_bcd(struct atapi_msf *msf)
1275 msf->minute = bcd2bin(msf->minute);
1276 msf->second = bcd2bin(msf->second);
1277 msf->frame = bcd2bin(msf->frame);
1280 int cdrom_check_status(ide_drive_t *drive, struct request_sense *sense)
1282 struct cdrom_info *info = drive->driver_data;
1283 struct cdrom_device_info *cdi = &info->devinfo;
1284 unsigned char cmd[BLK_MAX_CDB];
1286 memset(cmd, 0, BLK_MAX_CDB);
1287 cmd[0] = GPCMD_TEST_UNIT_READY;
1290 * Sanyo 3 CD changer uses byte 7 of TEST_UNIT_READY to switch CDs
1291 * instead of supporting the LOAD_UNLOAD opcode.
1293 cmd[7] = cdi->sanyo_slot % 3;
1295 return ide_cd_queue_pc(drive, cmd, 0, NULL, NULL, sense, 0, REQ_QUIET);
1298 static int cdrom_read_capacity(ide_drive_t *drive, unsigned long *capacity,
1299 unsigned long *sectors_per_frame,
1300 struct request_sense *sense)
1308 unsigned char cmd[BLK_MAX_CDB];
1309 unsigned len = sizeof(capbuf);
1312 memset(cmd, 0, BLK_MAX_CDB);
1313 cmd[0] = GPCMD_READ_CDVD_CAPACITY;
1315 stat = ide_cd_queue_pc(drive, cmd, 0, &capbuf, &len, sense, 0,
1321 * Sanity check the given block size
1323 blocklen = be32_to_cpu(capbuf.blocklen);
1331 printk(KERN_ERR "%s: weird block size %u\n",
1332 drive->name, blocklen);
1333 printk(KERN_ERR "%s: default to 2kb block size\n",
1339 *capacity = 1 + be32_to_cpu(capbuf.lba);
1340 *sectors_per_frame = blocklen >> SECTOR_BITS;
1344 static int cdrom_read_tocentry(ide_drive_t *drive, int trackno, int msf_flag,
1345 int format, char *buf, int buflen,
1346 struct request_sense *sense)
1348 unsigned char cmd[BLK_MAX_CDB];
1350 memset(cmd, 0, BLK_MAX_CDB);
1352 cmd[0] = GPCMD_READ_TOC_PMA_ATIP;
1354 cmd[7] = (buflen >> 8);
1355 cmd[8] = (buflen & 0xff);
1356 cmd[9] = (format << 6);
1361 return ide_cd_queue_pc(drive, cmd, 0, buf, &buflen, sense, 0, REQ_QUIET);
1364 /* Try to read the entire TOC for the disk into our internal buffer. */
1365 int ide_cd_read_toc(ide_drive_t *drive, struct request_sense *sense)
1367 int stat, ntracks, i;
1368 struct cdrom_info *info = drive->driver_data;
1369 struct cdrom_device_info *cdi = &info->devinfo;
1370 struct atapi_toc *toc = info->toc;
1372 struct atapi_toc_header hdr;
1373 struct atapi_toc_entry ent;
1376 unsigned long sectors_per_frame = SECTORS_PER_FRAME;
1379 /* try to allocate space */
1380 toc = kmalloc(sizeof(struct atapi_toc), GFP_KERNEL);
1382 printk(KERN_ERR "%s: No cdrom TOC buffer!\n",
1390 * Check to see if the existing data is still valid. If it is,
1393 (void) cdrom_check_status(drive, sense);
1395 if (drive->atapi_flags & IDE_AFLAG_TOC_VALID)
1398 /* try to get the total cdrom capacity and sector size */
1399 stat = cdrom_read_capacity(drive, &toc->capacity, §ors_per_frame,
1402 toc->capacity = 0x1fffff;
1404 set_capacity(info->disk, toc->capacity * sectors_per_frame);
1405 /* save a private copy of the TOC capacity for error handling */
1406 drive->probed_capacity = toc->capacity * sectors_per_frame;
1408 blk_queue_hardsect_size(drive->queue,
1409 sectors_per_frame << SECTOR_BITS);
1411 /* first read just the header, so we know how long the TOC is */
1412 stat = cdrom_read_tocentry(drive, 0, 1, 0, (char *) &toc->hdr,
1413 sizeof(struct atapi_toc_header), sense);
1417 if (drive->atapi_flags & IDE_AFLAG_TOCTRACKS_AS_BCD) {
1418 toc->hdr.first_track = bcd2bin(toc->hdr.first_track);
1419 toc->hdr.last_track = bcd2bin(toc->hdr.last_track);
1422 ntracks = toc->hdr.last_track - toc->hdr.first_track + 1;
1425 if (ntracks > MAX_TRACKS)
1426 ntracks = MAX_TRACKS;
1428 /* now read the whole schmeer */
1429 stat = cdrom_read_tocentry(drive, toc->hdr.first_track, 1, 0,
1431 sizeof(struct atapi_toc_header) +
1433 sizeof(struct atapi_toc_entry), sense);
1435 if (stat && toc->hdr.first_track > 1) {
1437 * Cds with CDI tracks only don't have any TOC entries, despite
1438 * of this the returned values are
1439 * first_track == last_track = number of CDI tracks + 1,
1440 * so that this case is indistinguishable from the same layout
1441 * plus an additional audio track. If we get an error for the
1442 * regular case, we assume a CDI without additional audio
1443 * tracks. In this case the readable TOC is empty (CDI tracks
1444 * are not included) and only holds the Leadout entry.
1449 stat = cdrom_read_tocentry(drive, CDROM_LEADOUT, 1, 0,
1451 sizeof(struct atapi_toc_header) +
1453 sizeof(struct atapi_toc_entry),
1458 if (drive->atapi_flags & IDE_AFLAG_TOCTRACKS_AS_BCD) {
1459 toc->hdr.first_track = (u8)bin2bcd(CDROM_LEADOUT);
1460 toc->hdr.last_track = (u8)bin2bcd(CDROM_LEADOUT);
1462 toc->hdr.first_track = CDROM_LEADOUT;
1463 toc->hdr.last_track = CDROM_LEADOUT;
1470 toc->hdr.toc_length = be16_to_cpu(toc->hdr.toc_length);
1472 if (drive->atapi_flags & IDE_AFLAG_TOCTRACKS_AS_BCD) {
1473 toc->hdr.first_track = bcd2bin(toc->hdr.first_track);
1474 toc->hdr.last_track = bcd2bin(toc->hdr.last_track);
1477 for (i = 0; i <= ntracks; i++) {
1478 if (drive->atapi_flags & IDE_AFLAG_TOCADDR_AS_BCD) {
1479 if (drive->atapi_flags & IDE_AFLAG_TOCTRACKS_AS_BCD)
1480 toc->ent[i].track = bcd2bin(toc->ent[i].track);
1481 msf_from_bcd(&toc->ent[i].addr.msf);
1483 toc->ent[i].addr.lba = msf_to_lba(toc->ent[i].addr.msf.minute,
1484 toc->ent[i].addr.msf.second,
1485 toc->ent[i].addr.msf.frame);
1488 if (toc->hdr.first_track != CDROM_LEADOUT) {
1489 /* read the multisession information */
1490 stat = cdrom_read_tocentry(drive, 0, 0, 1, (char *)&ms_tmp,
1491 sizeof(ms_tmp), sense);
1495 toc->last_session_lba = be32_to_cpu(ms_tmp.ent.addr.lba);
1497 ms_tmp.hdr.last_track = CDROM_LEADOUT;
1498 ms_tmp.hdr.first_track = ms_tmp.hdr.last_track;
1499 toc->last_session_lba = msf_to_lba(0, 2, 0); /* 0m 2s 0f */
1502 if (drive->atapi_flags & IDE_AFLAG_TOCADDR_AS_BCD) {
1503 /* re-read multisession information using MSF format */
1504 stat = cdrom_read_tocentry(drive, 0, 1, 1, (char *)&ms_tmp,
1505 sizeof(ms_tmp), sense);
1509 msf_from_bcd(&ms_tmp.ent.addr.msf);
1510 toc->last_session_lba = msf_to_lba(ms_tmp.ent.addr.msf.minute,
1511 ms_tmp.ent.addr.msf.second,
1512 ms_tmp.ent.addr.msf.frame);
1515 toc->xa_flag = (ms_tmp.hdr.first_track != ms_tmp.hdr.last_track);
1517 /* now try to get the total cdrom capacity */
1518 stat = cdrom_get_last_written(cdi, &last_written);
1519 if (!stat && (last_written > toc->capacity)) {
1520 toc->capacity = last_written;
1521 set_capacity(info->disk, toc->capacity * sectors_per_frame);
1522 drive->probed_capacity = toc->capacity * sectors_per_frame;
1525 /* Remember that we've read this stuff. */
1526 drive->atapi_flags |= IDE_AFLAG_TOC_VALID;
1531 int ide_cdrom_get_capabilities(ide_drive_t *drive, u8 *buf)
1533 struct cdrom_info *info = drive->driver_data;
1534 struct cdrom_device_info *cdi = &info->devinfo;
1535 struct packet_command cgc;
1536 int stat, attempts = 3, size = ATAPI_CAPABILITIES_PAGE_SIZE;
1538 if ((drive->atapi_flags & IDE_AFLAG_FULL_CAPS_PAGE) == 0)
1539 size -= ATAPI_CAPABILITIES_PAGE_PAD_SIZE;
1541 init_cdrom_command(&cgc, buf, size, CGC_DATA_UNKNOWN);
1543 /* we seem to get stat=0x01,err=0x00 the first time (??) */
1544 stat = cdrom_mode_sense(cdi, &cgc, GPMODE_CAPABILITIES_PAGE, 0);
1547 } while (--attempts);
1551 void ide_cdrom_update_speed(ide_drive_t *drive, u8 *buf)
1553 struct cdrom_info *cd = drive->driver_data;
1554 u16 curspeed, maxspeed;
1556 if (drive->atapi_flags & IDE_AFLAG_LE_SPEED_FIELDS) {
1557 curspeed = le16_to_cpup((__le16 *)&buf[8 + 14]);
1558 maxspeed = le16_to_cpup((__le16 *)&buf[8 + 8]);
1560 curspeed = be16_to_cpup((__be16 *)&buf[8 + 14]);
1561 maxspeed = be16_to_cpup((__be16 *)&buf[8 + 8]);
1564 cd->current_speed = (curspeed + (176/2)) / 176;
1565 cd->max_speed = (maxspeed + (176/2)) / 176;
1568 #define IDE_CD_CAPABILITIES \
1569 (CDC_CLOSE_TRAY | CDC_OPEN_TRAY | CDC_LOCK | CDC_SELECT_SPEED | \
1570 CDC_SELECT_DISC | CDC_MULTI_SESSION | CDC_MCN | CDC_MEDIA_CHANGED | \
1571 CDC_PLAY_AUDIO | CDC_RESET | CDC_DRIVE_STATUS | CDC_CD_R | \
1572 CDC_CD_RW | CDC_DVD | CDC_DVD_R | CDC_DVD_RAM | CDC_GENERIC_PACKET | \
1573 CDC_MO_DRIVE | CDC_MRW | CDC_MRW_W | CDC_RAM)
1575 static struct cdrom_device_ops ide_cdrom_dops = {
1576 .open = ide_cdrom_open_real,
1577 .release = ide_cdrom_release_real,
1578 .drive_status = ide_cdrom_drive_status,
1579 .media_changed = ide_cdrom_check_media_change_real,
1580 .tray_move = ide_cdrom_tray_move,
1581 .lock_door = ide_cdrom_lock_door,
1582 .select_speed = ide_cdrom_select_speed,
1583 .get_last_session = ide_cdrom_get_last_session,
1584 .get_mcn = ide_cdrom_get_mcn,
1585 .reset = ide_cdrom_reset,
1586 .audio_ioctl = ide_cdrom_audio_ioctl,
1587 .capability = IDE_CD_CAPABILITIES,
1588 .generic_packet = ide_cdrom_packet,
1591 static int ide_cdrom_register(ide_drive_t *drive, int nslots)
1593 struct cdrom_info *info = drive->driver_data;
1594 struct cdrom_device_info *devinfo = &info->devinfo;
1596 devinfo->ops = &ide_cdrom_dops;
1597 devinfo->speed = info->current_speed;
1598 devinfo->capacity = nslots;
1599 devinfo->handle = drive;
1600 strcpy(devinfo->name, drive->name);
1602 if (drive->atapi_flags & IDE_AFLAG_NO_SPEED_SELECT)
1603 devinfo->mask |= CDC_SELECT_SPEED;
1605 devinfo->disk = info->disk;
1606 return register_cdrom(devinfo);
1609 static int ide_cdrom_probe_capabilities(ide_drive_t *drive)
1611 struct cdrom_info *cd = drive->driver_data;
1612 struct cdrom_device_info *cdi = &cd->devinfo;
1613 u8 buf[ATAPI_CAPABILITIES_PAGE_SIZE];
1614 mechtype_t mechtype;
1617 cdi->mask = (CDC_CD_R | CDC_CD_RW | CDC_DVD | CDC_DVD_R |
1618 CDC_DVD_RAM | CDC_SELECT_DISC | CDC_PLAY_AUDIO |
1619 CDC_MO_DRIVE | CDC_RAM);
1621 if (drive->media == ide_optical) {
1622 cdi->mask &= ~(CDC_MO_DRIVE | CDC_RAM);
1623 printk(KERN_ERR "%s: ATAPI magneto-optical drive\n",
1628 if (drive->atapi_flags & IDE_AFLAG_PRE_ATAPI12) {
1629 drive->atapi_flags &= ~IDE_AFLAG_NO_EJECT;
1630 cdi->mask &= ~CDC_PLAY_AUDIO;
1635 * We have to cheat a little here. the packet will eventually be queued
1636 * with ide_cdrom_packet(), which extracts the drive from cdi->handle.
1637 * Since this device hasn't been registered with the Uniform layer yet,
1638 * it can't do this. Same goes for cdi->ops.
1640 cdi->handle = drive;
1641 cdi->ops = &ide_cdrom_dops;
1643 if (ide_cdrom_get_capabilities(drive, buf))
1646 if ((buf[8 + 6] & 0x01) == 0)
1647 drive->atapi_flags |= IDE_AFLAG_NO_DOORLOCK;
1648 if (buf[8 + 6] & 0x08)
1649 drive->atapi_flags &= ~IDE_AFLAG_NO_EJECT;
1650 if (buf[8 + 3] & 0x01)
1651 cdi->mask &= ~CDC_CD_R;
1652 if (buf[8 + 3] & 0x02)
1653 cdi->mask &= ~(CDC_CD_RW | CDC_RAM);
1654 if (buf[8 + 2] & 0x38)
1655 cdi->mask &= ~CDC_DVD;
1656 if (buf[8 + 3] & 0x20)
1657 cdi->mask &= ~(CDC_DVD_RAM | CDC_RAM);
1658 if (buf[8 + 3] & 0x10)
1659 cdi->mask &= ~CDC_DVD_R;
1660 if ((buf[8 + 4] & 0x01) || (drive->atapi_flags & IDE_AFLAG_PLAY_AUDIO_OK))
1661 cdi->mask &= ~CDC_PLAY_AUDIO;
1663 mechtype = buf[8 + 6] >> 5;
1664 if (mechtype == mechtype_caddy ||
1665 mechtype == mechtype_popup ||
1666 (drive->atapi_flags & IDE_AFLAG_NO_AUTOCLOSE))
1667 cdi->mask |= CDC_CLOSE_TRAY;
1669 if (cdi->sanyo_slot > 0) {
1670 cdi->mask &= ~CDC_SELECT_DISC;
1672 } else if (mechtype == mechtype_individual_changer ||
1673 mechtype == mechtype_cartridge_changer) {
1674 nslots = cdrom_number_of_slots(cdi);
1676 cdi->mask &= ~CDC_SELECT_DISC;
1679 ide_cdrom_update_speed(drive, buf);
1681 printk(KERN_INFO "%s: ATAPI", drive->name);
1683 /* don't print speed if the drive reported 0 */
1685 printk(KERN_CONT " %dX", cd->max_speed);
1687 printk(KERN_CONT " %s", (cdi->mask & CDC_DVD) ? "CD-ROM" : "DVD-ROM");
1689 if ((cdi->mask & CDC_DVD_R) == 0 || (cdi->mask & CDC_DVD_RAM) == 0)
1690 printk(KERN_CONT " DVD%s%s",
1691 (cdi->mask & CDC_DVD_R) ? "" : "-R",
1692 (cdi->mask & CDC_DVD_RAM) ? "" : "-RAM");
1694 if ((cdi->mask & CDC_CD_R) == 0 || (cdi->mask & CDC_CD_RW) == 0)
1695 printk(KERN_CONT " CD%s%s",
1696 (cdi->mask & CDC_CD_R) ? "" : "-R",
1697 (cdi->mask & CDC_CD_RW) ? "" : "/RW");
1699 if ((cdi->mask & CDC_SELECT_DISC) == 0)
1700 printk(KERN_CONT " changer w/%d slots", nslots);
1702 printk(KERN_CONT " drive");
1704 printk(KERN_CONT ", %dkB Cache\n", be16_to_cpup((__be16 *)&buf[8 + 12]));
1709 /* standard prep_rq_fn that builds 10 byte cmds */
1710 static int ide_cdrom_prep_fs(struct request_queue *q, struct request *rq)
1712 int hard_sect = queue_hardsect_size(q);
1713 long block = (long)rq->hard_sector / (hard_sect >> 9);
1714 unsigned long blocks = rq->hard_nr_sectors / (hard_sect >> 9);
1716 memset(rq->cmd, 0, BLK_MAX_CDB);
1718 if (rq_data_dir(rq) == READ)
1719 rq->cmd[0] = GPCMD_READ_10;
1721 rq->cmd[0] = GPCMD_WRITE_10;
1726 rq->cmd[2] = (block >> 24) & 0xff;
1727 rq->cmd[3] = (block >> 16) & 0xff;
1728 rq->cmd[4] = (block >> 8) & 0xff;
1729 rq->cmd[5] = block & 0xff;
1732 * and transfer length
1734 rq->cmd[7] = (blocks >> 8) & 0xff;
1735 rq->cmd[8] = blocks & 0xff;
1741 * Most of the SCSI commands are supported directly by ATAPI devices.
1742 * This transform handles the few exceptions.
1744 static int ide_cdrom_prep_pc(struct request *rq)
1748 /* transform 6-byte read/write commands to the 10-byte version */
1749 if (c[0] == READ_6 || c[0] == WRITE_6) {
1756 c[0] += (READ_10 - READ_6);
1762 * it's silly to pretend we understand 6-byte sense commands, just
1763 * reject with ILLEGAL_REQUEST and the caller should take the
1764 * appropriate action
1766 if (c[0] == MODE_SENSE || c[0] == MODE_SELECT) {
1767 rq->errors = ILLEGAL_REQUEST;
1768 return BLKPREP_KILL;
1774 static int ide_cdrom_prep_fn(struct request_queue *q, struct request *rq)
1776 if (blk_fs_request(rq))
1777 return ide_cdrom_prep_fs(q, rq);
1778 else if (blk_pc_request(rq))
1779 return ide_cdrom_prep_pc(rq);
1784 struct cd_list_entry {
1785 const char *id_model;
1786 const char *id_firmware;
1787 unsigned int cd_flags;
1790 #ifdef CONFIG_IDE_PROC_FS
1791 static sector_t ide_cdrom_capacity(ide_drive_t *drive)
1793 unsigned long capacity, sectors_per_frame;
1795 if (cdrom_read_capacity(drive, &capacity, §ors_per_frame, NULL))
1798 return capacity * sectors_per_frame;
1801 static int proc_idecd_read_capacity(char *page, char **start, off_t off,
1802 int count, int *eof, void *data)
1804 ide_drive_t *drive = data;
1807 len = sprintf(page, "%llu\n", (long long)ide_cdrom_capacity(drive));
1808 PROC_IDE_READ_RETURN(page, start, off, count, eof, len);
1811 static ide_proc_entry_t idecd_proc[] = {
1812 { "capacity", S_IFREG|S_IRUGO, proc_idecd_read_capacity, NULL },
1813 { NULL, 0, NULL, NULL }
1816 static void ide_cdrom_add_settings(ide_drive_t *drive)
1818 ide_add_setting(drive, "dsc_overlap", SETTING_RW, TYPE_BYTE, 0, 1, 1, 1,
1819 &drive->dsc_overlap, NULL);
1822 static inline void ide_cdrom_add_settings(ide_drive_t *drive) { ; }
1825 static const struct cd_list_entry ide_cd_quirks_list[] = {
1826 /* Limit transfer size per interrupt. */
1827 { "SAMSUNG CD-ROM SCR-2430", NULL, IDE_AFLAG_LIMIT_NFRAMES },
1828 { "SAMSUNG CD-ROM SCR-2432", NULL, IDE_AFLAG_LIMIT_NFRAMES },
1829 /* SCR-3231 doesn't support the SET_CD_SPEED command. */
1830 { "SAMSUNG CD-ROM SCR-3231", NULL, IDE_AFLAG_NO_SPEED_SELECT },
1831 /* Old NEC260 (not R) was released before ATAPI 1.2 spec. */
1832 { "NEC CD-ROM DRIVE:260", "1.01", IDE_AFLAG_TOCADDR_AS_BCD |
1833 IDE_AFLAG_PRE_ATAPI12, },
1834 /* Vertos 300, some versions of this drive like to talk BCD. */
1835 { "V003S0DS", NULL, IDE_AFLAG_VERTOS_300_SSD, },
1836 /* Vertos 600 ESD. */
1837 { "V006E0DS", NULL, IDE_AFLAG_VERTOS_600_ESD, },
1839 * Sanyo 3 CD changer uses a non-standard command for CD changing
1840 * (by default standard ATAPI support for CD changers is used).
1842 { "CD-ROM CDR-C3 G", NULL, IDE_AFLAG_SANYO_3CD },
1843 { "CD-ROM CDR-C3G", NULL, IDE_AFLAG_SANYO_3CD },
1844 { "CD-ROM CDR_C36", NULL, IDE_AFLAG_SANYO_3CD },
1845 /* Stingray 8X CD-ROM. */
1846 { "STINGRAY 8422 IDE 8X CD-ROM 7-27-95", NULL, IDE_AFLAG_PRE_ATAPI12 },
1848 * ACER 50X CD-ROM and WPI 32X CD-ROM require the full spec length
1849 * mode sense page capabilities size, but older drives break.
1851 { "ATAPI CD ROM DRIVE 50X MAX", NULL, IDE_AFLAG_FULL_CAPS_PAGE },
1852 { "WPI CDS-32X", NULL, IDE_AFLAG_FULL_CAPS_PAGE },
1853 /* ACER/AOpen 24X CD-ROM has the speed fields byte-swapped. */
1854 { "", "241N", IDE_AFLAG_LE_SPEED_FIELDS },
1856 * Some drives used by Apple don't advertise audio play
1857 * but they do support reading TOC & audio datas.
1859 { "MATSHITADVD-ROM SR-8187", NULL, IDE_AFLAG_PLAY_AUDIO_OK },
1860 { "MATSHITADVD-ROM SR-8186", NULL, IDE_AFLAG_PLAY_AUDIO_OK },
1861 { "MATSHITADVD-ROM SR-8176", NULL, IDE_AFLAG_PLAY_AUDIO_OK },
1862 { "MATSHITADVD-ROM SR-8174", NULL, IDE_AFLAG_PLAY_AUDIO_OK },
1863 { "Optiarc DVD RW AD-5200A", NULL, IDE_AFLAG_PLAY_AUDIO_OK },
1864 { "Optiarc DVD RW AD-7200A", NULL, IDE_AFLAG_PLAY_AUDIO_OK },
1865 { "Optiarc DVD RW AD-7543A", NULL, IDE_AFLAG_NO_AUTOCLOSE },
1869 static unsigned int ide_cd_flags(struct hd_driveid *id)
1871 const struct cd_list_entry *cle = ide_cd_quirks_list;
1873 while (cle->id_model) {
1874 if (strcmp(cle->id_model, id->model) == 0 &&
1875 (cle->id_firmware == NULL ||
1876 strstr(id->fw_rev, cle->id_firmware)))
1877 return cle->cd_flags;
1884 static int ide_cdrom_setup(ide_drive_t *drive)
1886 struct cdrom_info *cd = drive->driver_data;
1887 struct cdrom_device_info *cdi = &cd->devinfo;
1888 struct hd_driveid *id = drive->id;
1891 blk_queue_prep_rq(drive->queue, ide_cdrom_prep_fn);
1892 blk_queue_dma_alignment(drive->queue, 31);
1893 blk_queue_update_dma_pad(drive->queue, 15);
1894 drive->queue->unplug_delay = (1 * HZ) / 1000;
1895 if (!drive->queue->unplug_delay)
1896 drive->queue->unplug_delay = 1;
1898 drive->special.all = 0;
1900 drive->atapi_flags = IDE_AFLAG_MEDIA_CHANGED | IDE_AFLAG_NO_EJECT |
1903 if ((id->config & 0x0060) == 0x20)
1904 drive->atapi_flags |= IDE_AFLAG_DRQ_INTERRUPT;
1906 if ((drive->atapi_flags & IDE_AFLAG_VERTOS_300_SSD) &&
1907 id->fw_rev[4] == '1' && id->fw_rev[6] <= '2')
1908 drive->atapi_flags |= (IDE_AFLAG_TOCTRACKS_AS_BCD |
1909 IDE_AFLAG_TOCADDR_AS_BCD);
1910 else if ((drive->atapi_flags & IDE_AFLAG_VERTOS_600_ESD) &&
1911 id->fw_rev[4] == '1' && id->fw_rev[6] <= '2')
1912 drive->atapi_flags |= IDE_AFLAG_TOCTRACKS_AS_BCD;
1913 else if (drive->atapi_flags & IDE_AFLAG_SANYO_3CD)
1914 /* 3 => use CD in slot 0 */
1915 cdi->sanyo_slot = 3;
1917 nslots = ide_cdrom_probe_capabilities(drive);
1919 /* set correct block size */
1920 blk_queue_hardsect_size(drive->queue, CD_FRAMESIZE);
1922 drive->dsc_overlap = (drive->next != drive);
1924 if (ide_cdrom_register(drive, nslots)) {
1925 printk(KERN_ERR "%s: %s failed to register device with the"
1926 " cdrom driver.\n", drive->name, __func__);
1927 cd->devinfo.handle = NULL;
1930 ide_cdrom_add_settings(drive);
1934 static void ide_cd_remove(ide_drive_t *drive)
1936 struct cdrom_info *info = drive->driver_data;
1938 ide_proc_unregister_driver(drive, info->driver);
1940 del_gendisk(info->disk);
1945 static void ide_cd_release(struct kref *kref)
1947 struct cdrom_info *info = to_ide_cd(kref);
1948 struct cdrom_device_info *devinfo = &info->devinfo;
1949 ide_drive_t *drive = info->drive;
1950 struct gendisk *g = info->disk;
1953 if (devinfo->handle == drive)
1954 unregister_cdrom(devinfo);
1955 drive->dsc_overlap = 0;
1956 drive->driver_data = NULL;
1957 blk_queue_prep_rq(drive->queue, NULL);
1958 g->private_data = NULL;
1963 static int ide_cd_probe(ide_drive_t *);
1965 static ide_driver_t ide_cdrom_driver = {
1967 .owner = THIS_MODULE,
1968 .name = "ide-cdrom",
1969 .bus = &ide_bus_type,
1971 .probe = ide_cd_probe,
1972 .remove = ide_cd_remove,
1973 .version = IDECD_VERSION,
1975 .supports_dsc_overlap = 1,
1976 .do_request = ide_cd_do_request,
1977 .end_request = ide_end_request,
1978 .error = __ide_error,
1979 #ifdef CONFIG_IDE_PROC_FS
1984 static int idecd_open(struct inode *inode, struct file *file)
1986 struct gendisk *disk = inode->i_bdev->bd_disk;
1987 struct cdrom_info *info;
1990 info = ide_cd_get(disk);
1994 rc = cdrom_open(&info->devinfo, inode, file);
2002 static int idecd_release(struct inode *inode, struct file *file)
2004 struct gendisk *disk = inode->i_bdev->bd_disk;
2005 struct cdrom_info *info = ide_cd_g(disk);
2007 cdrom_release(&info->devinfo, file);
2014 static int idecd_set_spindown(struct cdrom_device_info *cdi, unsigned long arg)
2016 struct packet_command cgc;
2021 if (copy_from_user(&spindown, (void __user *)arg, sizeof(char)))
2024 init_cdrom_command(&cgc, buffer, sizeof(buffer), CGC_DATA_UNKNOWN);
2026 stat = cdrom_mode_sense(cdi, &cgc, GPMODE_CDROM_PAGE, 0);
2030 buffer[11] = (buffer[11] & 0xf0) | (spindown & 0x0f);
2031 return cdrom_mode_select(cdi, &cgc);
2034 static int idecd_get_spindown(struct cdrom_device_info *cdi, unsigned long arg)
2036 struct packet_command cgc;
2041 init_cdrom_command(&cgc, buffer, sizeof(buffer), CGC_DATA_UNKNOWN);
2043 stat = cdrom_mode_sense(cdi, &cgc, GPMODE_CDROM_PAGE, 0);
2047 spindown = buffer[11] & 0x0f;
2048 if (copy_to_user((void __user *)arg, &spindown, sizeof(char)))
2053 static int idecd_ioctl(struct inode *inode, struct file *file,
2054 unsigned int cmd, unsigned long arg)
2056 struct block_device *bdev = inode->i_bdev;
2057 struct cdrom_info *info = ide_cd_g(bdev->bd_disk);
2061 case CDROMSETSPINDOWN:
2062 return idecd_set_spindown(&info->devinfo, arg);
2063 case CDROMGETSPINDOWN:
2064 return idecd_get_spindown(&info->devinfo, arg);
2069 err = generic_ide_ioctl(info->drive, file, bdev, cmd, arg);
2071 err = cdrom_ioctl(file, &info->devinfo, inode, cmd, arg);
2076 static int idecd_media_changed(struct gendisk *disk)
2078 struct cdrom_info *info = ide_cd_g(disk);
2079 return cdrom_media_changed(&info->devinfo);
2082 static int idecd_revalidate_disk(struct gendisk *disk)
2084 struct cdrom_info *info = ide_cd_g(disk);
2085 struct request_sense sense;
2087 ide_cd_read_toc(info->drive, &sense);
2092 static struct block_device_operations idecd_ops = {
2093 .owner = THIS_MODULE,
2095 .release = idecd_release,
2096 .ioctl = idecd_ioctl,
2097 .media_changed = idecd_media_changed,
2098 .revalidate_disk = idecd_revalidate_disk
2101 /* module options */
2102 static char *ignore;
2104 module_param(ignore, charp, 0400);
2105 MODULE_DESCRIPTION("ATAPI CD-ROM Driver");
2107 static int ide_cd_probe(ide_drive_t *drive)
2109 struct cdrom_info *info;
2111 struct request_sense sense;
2113 if (!strstr("ide-cdrom", drive->driver_req))
2115 if (!drive->present)
2117 if (drive->media != ide_cdrom && drive->media != ide_optical)
2119 /* skip drives that we were told to ignore */
2120 if (ignore != NULL) {
2121 if (strstr(ignore, drive->name)) {
2122 printk(KERN_INFO "ide-cd: ignoring drive %s\n",
2127 info = kzalloc(sizeof(struct cdrom_info), GFP_KERNEL);
2129 printk(KERN_ERR "%s: Can't allocate a cdrom structure\n",
2134 g = alloc_disk(1 << PARTN_BITS);
2138 ide_init_disk(g, drive);
2140 ide_proc_register_driver(drive, &ide_cdrom_driver);
2142 kref_init(&info->kref);
2144 info->drive = drive;
2145 info->driver = &ide_cdrom_driver;
2148 g->private_data = &info->driver;
2150 drive->driver_data = info;
2153 g->driverfs_dev = &drive->gendev;
2154 g->flags = GENHD_FL_CD | GENHD_FL_REMOVABLE;
2155 if (ide_cdrom_setup(drive)) {
2156 ide_proc_unregister_driver(drive, &ide_cdrom_driver);
2157 ide_cd_release(&info->kref);
2161 ide_cd_read_toc(drive, &sense);
2162 g->fops = &idecd_ops;
2163 g->flags |= GENHD_FL_REMOVABLE;
2173 static void __exit ide_cdrom_exit(void)
2175 driver_unregister(&ide_cdrom_driver.gen_driver);
2178 static int __init ide_cdrom_init(void)
2180 return driver_register(&ide_cdrom_driver.gen_driver);
2183 MODULE_ALIAS("ide:*m-cdrom*");
2184 MODULE_ALIAS("ide-cd");
2185 module_init(ide_cdrom_init);
2186 module_exit(ide_cdrom_exit);
2187 MODULE_LICENSE("GPL");