drivers/ide/ide-atapi.c

   1 /*
   2  * ATAPI support.
   3  */
   4
   5 #include <linux/kernel.h>
   6 #include <linux/delay.h>
   7 #include <linux/ide.h>
   8 #include <scsi/scsi.h>
   9
  10 #ifdef DEBUG
  11 #define debug_log(fmt, args...) \
  12         printk(KERN_INFO "ide: " fmt, ## args)
  13 #else
  14 #define debug_log(fmt, args...) do {} while (0)
  15 #endif
  16
  17 /*
  18  * Check whether we can support a device,
  19  * based on the ATAPI IDENTIFY command results.
  20  */
  21 int ide_check_atapi_device(ide_drive_t *drive, const char *s)
  22 {
  23         u16 *id = drive->id;
  24         u8 gcw[2], protocol, device_type, removable, drq_type, packet_size;
  25
  26         *((u16 *)&gcw) = id[ATA_ID_CONFIG];
  27
  28         protocol    = (gcw[1] & 0xC0) >> 6;
  29         device_type =  gcw[1] & 0x1F;
  30         removable   = (gcw[0] & 0x80) >> 7;
  31         drq_type    = (gcw[0] & 0x60) >> 5;
  32         packet_size =  gcw[0] & 0x03;
  33
  34 #ifdef CONFIG_PPC
  35         /* kludge for Apple PowerBook internal zip */
  36         if (drive->media == ide_floppy && device_type == 5 &&
  37             !strstr((char *)&id[ATA_ID_PROD], "CD-ROM") &&
  38             strstr((char *)&id[ATA_ID_PROD], "ZIP"))
  39                 device_type = 0;
  40 #endif
  41
  42         if (protocol != 2)
  43                 printk(KERN_ERR "%s: %s: protocol (0x%02x) is not ATAPI\n",
  44                         s, drive->name, protocol);
  45         else if ((drive->media == ide_floppy && device_type != 0) ||
  46                  (drive->media == ide_tape && device_type != 1))
  47                 printk(KERN_ERR "%s: %s: invalid device type (0x%02x)\n",
  48                         s, drive->name, device_type);
  49         else if (removable == 0)
  50                 printk(KERN_ERR "%s: %s: the removable flag is not set\n",
  51                         s, drive->name);
  52         else if (drive->media == ide_floppy && drq_type == 3)
  53                 printk(KERN_ERR "%s: %s: sorry, DRQ type (0x%02x) not "
  54                         "supported\n", s, drive->name, drq_type);
  55         else if (packet_size != 0)
  56                 printk(KERN_ERR "%s: %s: packet size (0x%02x) is not 12 "
  57                         "bytes\n", s, drive->name, packet_size);
  58         else
  59                 return 1;
  60         return 0;
  61 }
  62 EXPORT_SYMBOL_GPL(ide_check_atapi_device);
  63
  64 /* PIO data transfer routine using the scatter gather table. */
  65 int ide_io_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc,
  66                     unsigned int bcount, int write)
  67 {
  68         ide_hwif_t *hwif = drive->hwif;
  69         const struct ide_tp_ops *tp_ops = hwif->tp_ops;
  70         xfer_func_t *xf = write ? tp_ops->output_data : tp_ops->input_data;
  71         struct scatterlist *sg = pc->sg;
  72         char *buf;
  73         int count, done = 0;
  74
  75         while (bcount) {
  76                 count = min(sg->length - pc->b_count, bcount);
  77
  78                 if (PageHighMem(sg_page(sg))) {
  79                         unsigned long flags;
  80
  81                         local_irq_save(flags);
  82                         buf = kmap_atomic(sg_page(sg), KM_IRQ0) + sg->offset;
  83                         xf(drive, NULL, buf + pc->b_count, count);
  84                         kunmap_atomic(buf - sg->offset, KM_IRQ0);
  85                         local_irq_restore(flags);
  86                 } else {
  87                         buf = sg_virt(sg);
  88                         xf(drive, NULL, buf + pc->b_count, count);
  89                 }
  90
  91                 bcount -= count;
  92                 pc->b_count += count;
  93                 done += count;
  94
  95                 if (pc->b_count == sg->length) {
  96                         if (!--pc->sg_cnt)
  97                                 break;
  98                         pc->sg = sg = sg_next(sg);
  99                         pc->b_count = 0;
 100                 }
 101         }
 102
 103         if (bcount) {
 104                 printk(KERN_ERR "%s: %d leftover bytes, %s\n", drive->name,
 105                         bcount, write ? "padding with zeros"
 106                                       : "discarding data");
 107                 ide_pad_transfer(drive, write, bcount);
 108         }
 109
 110         return done;
 111 }
 112 EXPORT_SYMBOL_GPL(ide_io_buffers);
 113
 114 void ide_init_pc(struct ide_atapi_pc *pc)
 115 {
 116         memset(pc, 0, sizeof(*pc));
 117         pc->buf = pc->pc_buf;
 118         pc->buf_size = IDE_PC_BUFFER_SIZE;
 119 }
 120 EXPORT_SYMBOL_GPL(ide_init_pc);
 121
 122 /*
 123  * Generate a new packet command request in front of the request queue, before
 124  * the current request, so that it will be processed immediately, on the next
 125  * pass through the driver.
 126  */
 127 void ide_queue_pc_head(ide_drive_t *drive, struct gendisk *disk,
 128                        struct ide_atapi_pc *pc, struct request *rq)
 129 {
 130         blk_rq_init(NULL, rq);
 131         rq->cmd_type = REQ_TYPE_SPECIAL;
 132         rq->cmd_flags |= REQ_PREEMPT;
 133         rq->buffer = (char *)pc;
 134         rq->rq_disk = disk;
 135         memcpy(rq->cmd, pc->c, 12);
 136         if (drive->media == ide_tape)
 137                 rq->cmd[13] = REQ_IDETAPE_PC1;
 138         ide_do_drive_cmd(drive, rq);
 139 }
 140 EXPORT_SYMBOL_GPL(ide_queue_pc_head);
 141
 142 /*
 143  * Add a special packet command request to the tail of the request queue,
 144  * and wait for it to be serviced.
 145  */
 146 int ide_queue_pc_tail(ide_drive_t *drive, struct gendisk *disk,
 147                       struct ide_atapi_pc *pc)
 148 {
 149         struct request *rq;
 150         int error;
 151
 152         rq = blk_get_request(drive->queue, READ, __GFP_WAIT);
 153         rq->cmd_type = REQ_TYPE_SPECIAL;
 154         rq->buffer = (char *)pc;
 155         memcpy(rq->cmd, pc->c, 12);
 156         if (drive->media == ide_tape)
 157                 rq->cmd[13] = REQ_IDETAPE_PC1;
 158         error = blk_execute_rq(drive->queue, disk, rq, 0);
 159         blk_put_request(rq);
 160
 161         return error;
 162 }
 163 EXPORT_SYMBOL_GPL(ide_queue_pc_tail);
 164
 165 /* TODO: unify the code thus making some arguments go away */
 166 ide_startstop_t ide_pc_intr(ide_drive_t *drive, struct ide_atapi_pc *pc,
 167         ide_handler_t *handler, unsigned int timeout, ide_expiry_t *expiry,
 168         void (*update_buffers)(ide_drive_t *, struct ide_atapi_pc *),
 169         void (*retry_pc)(ide_drive_t *), void (*dsc_handle)(ide_drive_t *),
 170         int (*io_buffers)(ide_drive_t *, struct ide_atapi_pc *, unsigned, int))
 171 {
 172         ide_hwif_t *hwif = drive->hwif;
 173         struct request *rq = hwif->hwgroup->rq;
 174         const struct ide_tp_ops *tp_ops = hwif->tp_ops;
 175         xfer_func_t *xferfunc;
 176         unsigned int temp;
 177         u16 bcount;
 178         u8 stat, ireason, scsi = drive->scsi;
 179
 180         debug_log("Enter %s - interrupt handler\n", __func__);
 181
 182         if (pc->flags & PC_FLAG_TIMEDOUT) {
 183                 drive->pc_callback(drive);
 184                 return ide_stopped;
 185         }
 186
 187         /* Clear the interrupt */
 188         stat = tp_ops->read_status(hwif);
 189
 190         if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) {
 191                 if (hwif->dma_ops->dma_end(drive) ||
 192                     (drive->media == ide_tape && !scsi && (stat & ATA_ERR))) {
 193                         if (drive->media == ide_floppy && !scsi)
 194                                 printk(KERN_ERR "%s: DMA %s error\n",
 195                                         drive->name, rq_data_dir(pc->rq)
 196                                                      ? "write" : "read");
 197                         pc->flags |= PC_FLAG_DMA_ERROR;
 198                 } else {
 199                         pc->xferred = pc->req_xfer;
 200                         if (update_buffers)
 201                                 update_buffers(drive, pc);
 202                 }
 203                 debug_log("%s: DMA finished\n", drive->name);
 204         }
 205
 206         /* No more interrupts */
 207         if ((stat & ATA_DRQ) == 0) {
 208                 debug_log("Packet command completed, %d bytes transferred\n",
 209                           pc->xferred);
 210
 211                 pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS;
 212
 213                 local_irq_enable_in_hardirq();
 214
 215                 if (drive->media == ide_tape && !scsi &&
 216                     (stat & ATA_ERR) && rq->cmd[0] == REQUEST_SENSE)
 217                         stat &= ~ATA_ERR;
 218
 219                 if ((stat & ATA_ERR) || (pc->flags & PC_FLAG_DMA_ERROR)) {
 220                         /* Error detected */
 221                         debug_log("%s: I/O error\n", drive->name);
 222
 223                         if (drive->media != ide_tape || scsi) {
 224                                 pc->rq->errors++;
 225                                 if (scsi)
 226                                         goto cmd_finished;
 227                         }
 228
 229                         if (rq->cmd[0] == REQUEST_SENSE) {
 230                                 printk(KERN_ERR "%s: I/O error in request sense"
 231                                                 " command\n", drive->name);
 232                                 return ide_do_reset(drive);
 233                         }
 234
 235                         debug_log("[cmd %x]: check condition\n", rq->cmd[0]);
 236
 237                         /* Retry operation */
 238                         retry_pc(drive);
 239
 240                         /* queued, but not started */
 241                         return ide_stopped;
 242                 }
 243 cmd_finished:
 244                 pc->error = 0;
 245                 if ((pc->flags & PC_FLAG_WAIT_FOR_DSC) &&
 246                     (stat & ATA_DSC) == 0) {
 247                         dsc_handle(drive);
 248                         return ide_stopped;
 249                 }
 250
 251                 /* Command finished - Call the callback function */
 252                 drive->pc_callback(drive);
 253
 254                 return ide_stopped;
 255         }
 256
 257         if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) {
 258                 pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS;
 259                 printk(KERN_ERR "%s: The device wants to issue more interrupts "
 260                                 "in DMA mode\n", drive->name);
 261                 ide_dma_off(drive);
 262                 return ide_do_reset(drive);
 263         }
 264
 265         /* Get the number of bytes to transfer on this interrupt. */
 266         ide_read_bcount_and_ireason(drive, &bcount, &ireason);
 267
 268         if (ireason & ATAPI_COD) {
 269                 printk(KERN_ERR "%s: CoD != 0 in %s\n", drive->name, __func__);
 270                 return ide_do_reset(drive);
 271         }
 272
 273         if (((ireason & ATAPI_IO) == ATAPI_IO) ==
 274                 !!(pc->flags & PC_FLAG_WRITING)) {
 275                 /* Hopefully, we will never get here */
 276                 printk(KERN_ERR "%s: We wanted to %s, but the device wants us "
 277                                 "to %s!\n", drive->name,
 278                                 (ireason & ATAPI_IO) ? "Write" : "Read",
 279                                 (ireason & ATAPI_IO) ? "Read" : "Write");
 280                 return ide_do_reset(drive);
 281         }
 282
 283         if (!(pc->flags & PC_FLAG_WRITING)) {
 284                 /* Reading - Check that we have enough space */
 285                 temp = pc->xferred + bcount;
 286                 if (temp > pc->req_xfer) {
 287                         if (temp > pc->buf_size) {
 288                                 printk(KERN_ERR "%s: The device wants to send "
 289                                                 "us more data than expected - "
 290                                                 "discarding data\n",
 291                                                 drive->name);
 292                                 if (scsi)
 293                                         temp = pc->buf_size - pc->xferred;
 294                                 else
 295                                         temp = 0;
 296                                 if (temp) {
 297                                         if (pc->sg)
 298                                                 io_buffers(drive, pc, temp, 0);
 299                                         else
 300                                                 tp_ops->input_data(drive, NULL,
 301                                                         pc->cur_pos, temp);
 302                                         printk(KERN_ERR "%s: transferred %d of "
 303                                                         "%d bytes\n",
 304                                                         drive->name,
 305                                                         temp, bcount);
 306                                 }
 307                                 pc->xferred += temp;
 308                                 pc->cur_pos += temp;
 309                                 ide_pad_transfer(drive, 0, bcount - temp);
 310                                 ide_set_handler(drive, handler, timeout,
 311                                                 expiry);
 312                                 return ide_started;
 313                         }
 314                         debug_log("The device wants to send us more data than "
 315                                   "expected - allowing transfer\n");
 316                 }
 317                 xferfunc = tp_ops->input_data;
 318         } else
 319                 xferfunc = tp_ops->output_data;
 320
 321         if ((drive->media == ide_floppy && !scsi && !pc->buf) ||
 322             (drive->media == ide_tape && !scsi && pc->bh) ||
 323             (scsi && pc->sg)) {
 324                 int done = io_buffers(drive, pc, bcount,
 325                                   !!(pc->flags & PC_FLAG_WRITING));
 326
 327                 /* FIXME: don't do partial completions */
 328                 if (drive->media == ide_floppy && !scsi)
 329                         ide_end_request(drive, 1, done >> 9);
 330         } else
 331                 xferfunc(drive, NULL, pc->cur_pos, bcount);
 332
 333         /* Update the current position */
 334         pc->xferred += bcount;
 335         pc->cur_pos += bcount;
 336
 337         debug_log("[cmd %x] transferred %d bytes on that intr.\n",
 338                   rq->cmd[0], bcount);
 339
 340         /* And set the interrupt handler again */
 341         ide_set_handler(drive, handler, timeout, expiry);
 342         return ide_started;
 343 }
 344 EXPORT_SYMBOL_GPL(ide_pc_intr);
 345
 346 static u8 ide_read_ireason(ide_drive_t *drive)
 347 {
 348         ide_task_t task;
 349
 350         memset(&task, 0, sizeof(task));
 351         task.tf_flags = IDE_TFLAG_IN_NSECT;
 352
 353         drive->hwif->tp_ops->tf_read(drive, &task);
 354
 355         return task.tf.nsect & 3;
 356 }
 357
 358 static u8 ide_wait_ireason(ide_drive_t *drive, u8 ireason)
 359 {
 360         int retries = 100;
 361
 362         while (retries-- && ((ireason & ATAPI_COD) == 0 ||
 363                 (ireason & ATAPI_IO))) {
 364                 printk(KERN_ERR "%s: (IO,CoD != (0,1) while issuing "
 365                                 "a packet command, retrying\n", drive->name);
 366                 udelay(100);
 367                 ireason = ide_read_ireason(drive);
 368                 if (retries == 0) {
 369                         printk(KERN_ERR "%s: (IO,CoD != (0,1) while issuing "
 370                                         "a packet command, ignoring\n",
 371                                         drive->name);
 372                         ireason |= ATAPI_COD;
 373                         ireason &= ~ATAPI_IO;
 374                 }
 375         }
 376
 377         return ireason;
 378 }
 379
 380 ide_startstop_t ide_transfer_pc(ide_drive_t *drive, struct ide_atapi_pc *pc,
 381                                 ide_handler_t *handler, unsigned int timeout,
 382                                 ide_expiry_t *expiry)
 383 {
 384         ide_hwif_t *hwif = drive->hwif;
 385         struct request *rq = hwif->hwgroup->rq;
 386         ide_startstop_t startstop;
 387         u8 ireason;
 388
 389         if (ide_wait_stat(&startstop, drive, ATA_DRQ, ATA_BUSY, WAIT_READY)) {
 390                 printk(KERN_ERR "%s: Strange, packet command initiated yet "
 391                                 "DRQ isn't asserted\n", drive->name);
 392                 return startstop;
 393         }
 394
 395         ireason = ide_read_ireason(drive);
 396         if (drive->media == ide_tape && !drive->scsi)
 397                 ireason = ide_wait_ireason(drive, ireason);
 398
 399         if ((ireason & ATAPI_COD) == 0 || (ireason & ATAPI_IO)) {
 400                 printk(KERN_ERR "%s: (IO,CoD) != (0,1) while issuing "
 401                                 "a packet command\n", drive->name);
 402                 return ide_do_reset(drive);
 403         }
 404
 405         /* Set the interrupt routine */
 406         ide_set_handler(drive, handler, timeout, expiry);
 407
 408         /* Begin DMA, if necessary */
 409         if (pc->flags & PC_FLAG_DMA_OK) {
 410                 pc->flags |= PC_FLAG_DMA_IN_PROGRESS;
 411                 hwif->dma_ops->dma_start(drive);
 412         }
 413
 414         /* Send the actual packet */
 415         if ((drive->atapi_flags & IDE_AFLAG_ZIP_DRIVE) == 0)
 416                 hwif->tp_ops->output_data(drive, NULL, rq->cmd, 12);
 417
 418         return ide_started;
 419 }
 420 EXPORT_SYMBOL_GPL(ide_transfer_pc);
 421
 422 ide_startstop_t ide_issue_pc(ide_drive_t *drive, struct ide_atapi_pc *pc,
 423                              ide_handler_t *handler, unsigned int timeout,
 424                              ide_expiry_t *expiry)
 425 {
 426         ide_hwif_t *hwif = drive->hwif;
 427         u16 bcount;
 428         u8 dma = 0;
 429
 430         /* We haven't transferred any data yet */
 431         pc->xferred = 0;
 432         pc->cur_pos = pc->buf;
 433
 434         /* Request to transfer the entire buffer at once */
 435         if (drive->media == ide_tape && !drive->scsi)
 436                 bcount = pc->req_xfer;
 437         else
 438                 bcount = min(pc->req_xfer, 63 * 1024);
 439
 440         if (pc->flags & PC_FLAG_DMA_ERROR) {
 441                 pc->flags &= ~PC_FLAG_DMA_ERROR;
 442                 ide_dma_off(drive);
 443         }
 444
 445         if ((pc->flags & PC_FLAG_DMA_OK) && drive->using_dma) {
 446                 if (drive->scsi)
 447                         hwif->sg_mapped = 1;
 448                 dma = !hwif->dma_ops->dma_setup(drive);
 449                 if (drive->scsi)
 450                         hwif->sg_mapped = 0;
 451         }
 452
 453         if (!dma)
 454                 pc->flags &= ~PC_FLAG_DMA_OK;
 455
 456         ide_pktcmd_tf_load(drive, drive->scsi ? 0 : IDE_TFLAG_OUT_DEVICE,
 457                            bcount, dma);
 458
 459         /* Issue the packet command */
 460         if (drive->atapi_flags & IDE_AFLAG_DRQ_INTERRUPT) {
 461                 ide_execute_command(drive, ATA_CMD_PACKET, handler,
 462                                     timeout, NULL);
 463                 return ide_started;
 464         } else {
 465                 ide_execute_pkt_cmd(drive);
 466                 return (*handler)(drive);
 467         }
 468 }
 469 EXPORT_SYMBOL_GPL(ide_issue_pc);