]> www.pilppa.org Git - linux-2.6-omap-h63xx.git/blob - drivers/i2c/busses/i2c-mpc.c
bbe787b243b7e6766576a49a525dab883f49b620
[linux-2.6-omap-h63xx.git] / drivers / i2c / busses / i2c-mpc.c
1 /*
2  * (C) Copyright 2003-2004
3  * Humboldt Solutions Ltd, adrian@humboldt.co.uk.
4
5  * This is a combined i2c adapter and algorithm driver for the
6  * MPC107/Tsi107 PowerPC northbridge and processors that include
7  * the same I2C unit (8240, 8245, 85xx).
8  *
9  * Release 0.8
10  *
11  * This file is licensed under the terms of the GNU General Public
12  * License version 2. This program is licensed "as is" without any
13  * warranty of any kind, whether express or implied.
14  */
15
16 #include <linux/kernel.h>
17 #include <linux/module.h>
18 #include <linux/sched.h>
19 #include <linux/init.h>
20 #include <linux/platform_device.h>
21
22 #include <asm/io.h>
23 #include <linux/fsl_devices.h>
24 #include <linux/i2c.h>
25 #include <linux/interrupt.h>
26 #include <linux/delay.h>
27
28 #define MPC_I2C_ADDR  0x00
29 #define MPC_I2C_FDR     0x04
30 #define MPC_I2C_CR      0x08
31 #define MPC_I2C_SR      0x0c
32 #define MPC_I2C_DR      0x10
33 #define MPC_I2C_DFSRR 0x14
34 #define MPC_I2C_REGION 0x20
35
36 #define CCR_MEN  0x80
37 #define CCR_MIEN 0x40
38 #define CCR_MSTA 0x20
39 #define CCR_MTX  0x10
40 #define CCR_TXAK 0x08
41 #define CCR_RSTA 0x04
42
43 #define CSR_MCF  0x80
44 #define CSR_MAAS 0x40
45 #define CSR_MBB  0x20
46 #define CSR_MAL  0x10
47 #define CSR_SRW  0x04
48 #define CSR_MIF  0x02
49 #define CSR_RXAK 0x01
50
51 struct mpc_i2c {
52         void __iomem *base;
53         u32 interrupt;
54         wait_queue_head_t queue;
55         struct i2c_adapter adap;
56         int irq;
57         u32 flags;
58 };
59
60 static __inline__ void writeccr(struct mpc_i2c *i2c, u32 x)
61 {
62         writeb(x, i2c->base + MPC_I2C_CR);
63 }
64
65 static irqreturn_t mpc_i2c_isr(int irq, void *dev_id)
66 {
67         struct mpc_i2c *i2c = dev_id;
68         if (readb(i2c->base + MPC_I2C_SR) & CSR_MIF) {
69                 /* Read again to allow register to stabilise */
70                 i2c->interrupt = readb(i2c->base + MPC_I2C_SR);
71                 writeb(0, i2c->base + MPC_I2C_SR);
72                 wake_up_interruptible(&i2c->queue);
73         }
74         return IRQ_HANDLED;
75 }
76
77 /* Sometimes 9th clock pulse isn't generated, and slave doesn't release
78  * the bus, because it wants to send ACK.
79  * Following sequence of enabling/disabling and sending start/stop generates
80  * the pulse, so it's all OK.
81  */
82 static void mpc_i2c_fixup(struct mpc_i2c *i2c)
83 {
84         writeccr(i2c, 0);
85         udelay(30);
86         writeccr(i2c, CCR_MEN);
87         udelay(30);
88         writeccr(i2c, CCR_MSTA | CCR_MTX);
89         udelay(30);
90         writeccr(i2c, CCR_MSTA | CCR_MTX | CCR_MEN);
91         udelay(30);
92         writeccr(i2c, CCR_MEN);
93         udelay(30);
94 }
95
96 static int i2c_wait(struct mpc_i2c *i2c, unsigned timeout, int writing)
97 {
98         unsigned long orig_jiffies = jiffies;
99         u32 x;
100         int result = 0;
101
102         if (i2c->irq == 0)
103         {
104                 while (!(readb(i2c->base + MPC_I2C_SR) & CSR_MIF)) {
105                         schedule();
106                         if (time_after(jiffies, orig_jiffies + timeout)) {
107                                 pr_debug("I2C: timeout\n");
108                                 writeccr(i2c, 0);
109                                 result = -EIO;
110                                 break;
111                         }
112                 }
113                 x = readb(i2c->base + MPC_I2C_SR);
114                 writeb(0, i2c->base + MPC_I2C_SR);
115         } else {
116                 /* Interrupt mode */
117                 result = wait_event_interruptible_timeout(i2c->queue,
118                         (i2c->interrupt & CSR_MIF), timeout * HZ);
119
120                 if (unlikely(result < 0)) {
121                         pr_debug("I2C: wait interrupted\n");
122                         writeccr(i2c, 0);
123                 } else if (unlikely(!(i2c->interrupt & CSR_MIF))) {
124                         pr_debug("I2C: wait timeout\n");
125                         writeccr(i2c, 0);
126                         result = -ETIMEDOUT;
127                 }
128
129                 x = i2c->interrupt;
130                 i2c->interrupt = 0;
131         }
132
133         if (result < 0)
134                 return result;
135
136         if (!(x & CSR_MCF)) {
137                 pr_debug("I2C: unfinished\n");
138                 return -EIO;
139         }
140
141         if (x & CSR_MAL) {
142                 pr_debug("I2C: MAL\n");
143                 return -EIO;
144         }
145
146         if (writing && (x & CSR_RXAK)) {
147                 pr_debug("I2C: No RXAK\n");
148                 /* generate stop */
149                 writeccr(i2c, CCR_MEN);
150                 return -EIO;
151         }
152         return 0;
153 }
154
155 static void mpc_i2c_setclock(struct mpc_i2c *i2c)
156 {
157         /* Set clock and filters */
158         if (i2c->flags & FSL_I2C_DEV_SEPARATE_DFSRR) {
159                 writeb(0x31, i2c->base + MPC_I2C_FDR);
160                 writeb(0x10, i2c->base + MPC_I2C_DFSRR);
161         } else if (i2c->flags & FSL_I2C_DEV_CLOCK_5200)
162                 writeb(0x3f, i2c->base + MPC_I2C_FDR);
163         else
164                 writel(0x1031, i2c->base + MPC_I2C_FDR);
165 }
166
167 static void mpc_i2c_start(struct mpc_i2c *i2c)
168 {
169         /* Clear arbitration */
170         writeb(0, i2c->base + MPC_I2C_SR);
171         /* Start with MEN */
172         writeccr(i2c, CCR_MEN);
173 }
174
175 static void mpc_i2c_stop(struct mpc_i2c *i2c)
176 {
177         writeccr(i2c, CCR_MEN);
178 }
179
180 static int mpc_write(struct mpc_i2c *i2c, int target,
181                      const u8 * data, int length, int restart)
182 {
183         int i, result;
184         unsigned timeout = i2c->adap.timeout;
185         u32 flags = restart ? CCR_RSTA : 0;
186
187         /* Start with MEN */
188         if (!restart)
189                 writeccr(i2c, CCR_MEN);
190         /* Start as master */
191         writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA | CCR_MTX | flags);
192         /* Write target byte */
193         writeb((target << 1), i2c->base + MPC_I2C_DR);
194
195         result = i2c_wait(i2c, timeout, 1);
196         if (result < 0)
197                 return result;
198
199         for (i = 0; i < length; i++) {
200                 /* Write data byte */
201                 writeb(data[i], i2c->base + MPC_I2C_DR);
202
203                 result = i2c_wait(i2c, timeout, 1);
204                 if (result < 0)
205                         return result;
206         }
207
208         return 0;
209 }
210
211 static int mpc_read(struct mpc_i2c *i2c, int target,
212                     u8 * data, int length, int restart)
213 {
214         unsigned timeout = i2c->adap.timeout;
215         int i, result;
216         u32 flags = restart ? CCR_RSTA : 0;
217
218         /* Start with MEN */
219         if (!restart)
220                 writeccr(i2c, CCR_MEN);
221         /* Switch to read - restart */
222         writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA | CCR_MTX | flags);
223         /* Write target address byte - this time with the read flag set */
224         writeb((target << 1) | 1, i2c->base + MPC_I2C_DR);
225
226         result = i2c_wait(i2c, timeout, 1);
227         if (result < 0)
228                 return result;
229
230         if (length) {
231                 if (length == 1)
232                         writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA | CCR_TXAK);
233                 else
234                         writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA);
235                 /* Dummy read */
236                 readb(i2c->base + MPC_I2C_DR);
237         }
238
239         for (i = 0; i < length; i++) {
240                 result = i2c_wait(i2c, timeout, 0);
241                 if (result < 0)
242                         return result;
243
244                 /* Generate txack on next to last byte */
245                 if (i == length - 2)
246                         writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA | CCR_TXAK);
247                 /* Generate stop on last byte */
248                 if (i == length - 1)
249                         writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_TXAK);
250                 data[i] = readb(i2c->base + MPC_I2C_DR);
251         }
252
253         return length;
254 }
255
256 static int mpc_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
257 {
258         struct i2c_msg *pmsg;
259         int i;
260         int ret = 0;
261         unsigned long orig_jiffies = jiffies;
262         struct mpc_i2c *i2c = i2c_get_adapdata(adap);
263
264         mpc_i2c_start(i2c);
265
266         /* Allow bus up to 1s to become not busy */
267         while (readb(i2c->base + MPC_I2C_SR) & CSR_MBB) {
268                 if (signal_pending(current)) {
269                         pr_debug("I2C: Interrupted\n");
270                         writeccr(i2c, 0);
271                         return -EINTR;
272                 }
273                 if (time_after(jiffies, orig_jiffies + HZ)) {
274                         pr_debug("I2C: timeout\n");
275                         if (readb(i2c->base + MPC_I2C_SR) ==
276                             (CSR_MCF | CSR_MBB | CSR_RXAK))
277                                 mpc_i2c_fixup(i2c);
278                         return -EIO;
279                 }
280                 schedule();
281         }
282
283         for (i = 0; ret >= 0 && i < num; i++) {
284                 pmsg = &msgs[i];
285                 pr_debug("Doing %s %d bytes to 0x%02x - %d of %d messages\n",
286                          pmsg->flags & I2C_M_RD ? "read" : "write",
287                          pmsg->len, pmsg->addr, i + 1, num);
288                 if (pmsg->flags & I2C_M_RD)
289                         ret =
290                             mpc_read(i2c, pmsg->addr, pmsg->buf, pmsg->len, i);
291                 else
292                         ret =
293                             mpc_write(i2c, pmsg->addr, pmsg->buf, pmsg->len, i);
294         }
295         mpc_i2c_stop(i2c);
296         return (ret < 0) ? ret : num;
297 }
298
299 static u32 mpc_functionality(struct i2c_adapter *adap)
300 {
301         return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
302 }
303
304 static const struct i2c_algorithm mpc_algo = {
305         .master_xfer = mpc_xfer,
306         .functionality = mpc_functionality,
307 };
308
309 static struct i2c_adapter mpc_ops = {
310         .owner = THIS_MODULE,
311         .name = "MPC adapter",
312         .id = I2C_HW_MPC107,
313         .algo = &mpc_algo,
314         .class = I2C_CLASS_HWMON,
315         .timeout = 1,
316 };
317
318 static int fsl_i2c_probe(struct platform_device *pdev)
319 {
320         int result = 0;
321         struct mpc_i2c *i2c;
322         struct fsl_i2c_platform_data *pdata;
323         struct resource *r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
324
325         pdata = (struct fsl_i2c_platform_data *) pdev->dev.platform_data;
326
327         i2c = kzalloc(sizeof(*i2c), GFP_KERNEL);
328         if (!i2c)
329                 return -ENOMEM;
330
331         i2c->irq = platform_get_irq(pdev, 0);
332         if (i2c->irq < 0) {
333                 result = -ENXIO;
334                 goto fail_get_irq;
335         }
336         i2c->flags = pdata->device_flags;
337         init_waitqueue_head(&i2c->queue);
338
339         i2c->base = ioremap((phys_addr_t)r->start, MPC_I2C_REGION);
340
341         if (!i2c->base) {
342                 printk(KERN_ERR "i2c-mpc - failed to map controller\n");
343                 result = -ENOMEM;
344                 goto fail_map;
345         }
346
347         if (i2c->irq != 0)
348                 if ((result = request_irq(i2c->irq, mpc_i2c_isr,
349                                           IRQF_SHARED, "i2c-mpc", i2c)) < 0) {
350                         printk(KERN_ERR
351                                "i2c-mpc - failed to attach interrupt\n");
352                         goto fail_irq;
353                 }
354
355         mpc_i2c_setclock(i2c);
356         platform_set_drvdata(pdev, i2c);
357
358         i2c->adap = mpc_ops;
359         i2c->adap.nr = pdev->id;
360         i2c_set_adapdata(&i2c->adap, i2c);
361         i2c->adap.dev.parent = &pdev->dev;
362         if ((result = i2c_add_numbered_adapter(&i2c->adap)) < 0) {
363                 printk(KERN_ERR "i2c-mpc - failed to add adapter\n");
364                 goto fail_add;
365         }
366
367         return result;
368
369       fail_add:
370         if (i2c->irq != 0)
371                 free_irq(i2c->irq, i2c);
372       fail_irq:
373         iounmap(i2c->base);
374       fail_map:
375       fail_get_irq:
376         kfree(i2c);
377         return result;
378 };
379
380 static int fsl_i2c_remove(struct platform_device *pdev)
381 {
382         struct mpc_i2c *i2c = platform_get_drvdata(pdev);
383
384         i2c_del_adapter(&i2c->adap);
385         platform_set_drvdata(pdev, NULL);
386
387         if (i2c->irq != 0)
388                 free_irq(i2c->irq, i2c);
389
390         iounmap(i2c->base);
391         kfree(i2c);
392         return 0;
393 };
394
395 /* Structure for a device driver */
396 static struct platform_driver fsl_i2c_driver = {
397         .probe = fsl_i2c_probe,
398         .remove = fsl_i2c_remove,
399         .driver = {
400                 .owner = THIS_MODULE,
401                 .name = "fsl-i2c",
402         },
403 };
404
405 static int __init fsl_i2c_init(void)
406 {
407         return platform_driver_register(&fsl_i2c_driver);
408 }
409
410 static void __exit fsl_i2c_exit(void)
411 {
412         platform_driver_unregister(&fsl_i2c_driver);
413 }
414
415 module_init(fsl_i2c_init);
416 module_exit(fsl_i2c_exit);
417
418 MODULE_AUTHOR("Adrian Cox <adrian@humboldt.co.uk>");
419 MODULE_DESCRIPTION
420     ("I2C-Bus adapter for MPC107 bridge and MPC824x/85xx/52xx processors");
421 MODULE_LICENSE("GPL");