drivers/char/riscom8.c

   1 /*
   2  *      linux/drivers/char/riscom.c  -- RISCom/8 multiport serial driver.
   3  *
   4  *      Copyright (C) 1994-1996  Dmitry Gorodchanin (pgmdsg@ibi.com)
   5  *
   6  *      This code is loosely based on the Linux serial driver, written by
   7  *      Linus Torvalds, Theodore T'so and others. The RISCom/8 card
   8  *      programming info was obtained from various drivers for other OSes
   9  *      (FreeBSD, ISC, etc), but no source code from those drivers were
  10  *      directly included in this driver.
  11  *
  12  *
  13  *      This program is free software; you can redistribute it and/or modify
  14  *      it under the terms of the GNU General Public License as published by
  15  *      the Free Software Foundation; either version 2 of the License, or
  16  *      (at your option) any later version.
  17  *
  18  *      This program is distributed in the hope that it will be useful,
  19  *      but WITHOUT ANY WARRANTY; without even the implied warranty of
  20  *      MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  21  *      GNU General Public License for more details.
  22  *
  23  *      You should have received a copy of the GNU General Public License
  24  *      along with this program; if not, write to the Free Software
  25  *      Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  26  *
  27  *      Revision 1.1
  28  *
  29  *      ChangeLog:
  30  *      Arnaldo Carvalho de Melo <acme@conectiva.com.br> - 27-Jun-2001
  31  *      - get rid of check_region and several cleanups
  32  */
  33
  34 #include <linux/module.h>
  35
  36 #include <asm/io.h>
  37 #include <linux/kernel.h>
  38 #include <linux/sched.h>
  39 #include <linux/ioport.h>
  40 #include <linux/interrupt.h>
  41 #include <linux/errno.h>
  42 #include <linux/tty.h>
  43 #include <linux/mm.h>
  44 #include <linux/serial.h>
  45 #include <linux/fcntl.h>
  46 #include <linux/major.h>
  47 #include <linux/init.h>
  48 #include <linux/delay.h>
  49 #include <linux/tty_flip.h>
  50
  51 #include <asm/uaccess.h>
  52
  53 #include "riscom8.h"
  54 #include "riscom8_reg.h"
  55
  56 /* Am I paranoid or not ? ;-) */
  57 #define RISCOM_PARANOIA_CHECK
  58
  59 /*
  60  * Crazy InteliCom/8 boards sometimes has swapped CTS & DSR signals.
  61  * You can slightly speed up things by #undefing the following option,
  62  * if you are REALLY sure that your board is correct one.
  63  */
  64
  65 #define RISCOM_BRAIN_DAMAGED_CTS
  66
  67 /*
  68  * The following defines are mostly for testing purposes. But if you need
  69  * some nice reporting in your syslog, you can define them also.
  70  */
  71 #undef RC_REPORT_FIFO
  72 #undef RC_REPORT_OVERRUN
  73
  74
  75 #define RISCOM_LEGAL_FLAGS \
  76         (ASYNC_HUP_NOTIFY   | ASYNC_SAK          | ASYNC_SPLIT_TERMIOS   | \
  77          ASYNC_SPD_HI       | ASYNC_SPEED_VHI    | ASYNC_SESSION_LOCKOUT | \
  78          ASYNC_PGRP_LOCKOUT | ASYNC_CALLOUT_NOHUP)
  79
  80 #define RS_EVENT_WRITE_WAKEUP   0
  81
  82 static struct tty_driver *riscom_driver;
  83
  84 static struct riscom_board rc_board[RC_NBOARD] =  {
  85         {
  86                 .base   = RC_IOBASE1,
  87         },
  88         {
  89                 .base   = RC_IOBASE2,
  90         },
  91         {
  92                 .base   = RC_IOBASE3,
  93         },
  94         {
  95                 .base   = RC_IOBASE4,
  96         },
  97 };
  98
  99 static struct riscom_port rc_port[RC_NBOARD * RC_NPORT];
 100
 101 /* RISCom/8 I/O ports addresses (without address translation) */
 102 static unsigned short rc_ioport[] =  {
 103 #if 1
 104         0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x09, 0x0a, 0x0b, 0x0c,
 105 #else
 106         0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x09, 0x0a, 0x0b, 0x0c, 0x10,
 107         0x11, 0x12, 0x18, 0x28, 0x31, 0x32, 0x39, 0x3a, 0x40, 0x41, 0x61, 0x62,
 108         0x63, 0x64, 0x6b, 0x70, 0x71, 0x78, 0x7a, 0x7b, 0x7f, 0x100, 0x101
 109 #endif
 110 };
 111 #define RC_NIOPORT      ARRAY_SIZE(rc_ioport)
 112
 113
 114 static inline int rc_paranoia_check(struct riscom_port const * port,
 115                                     char *name, const char *routine)
 116 {
 117 #ifdef RISCOM_PARANOIA_CHECK
 118         static const char badmagic[] = KERN_INFO
 119                 "rc: Warning: bad riscom port magic number for device %s in %s\n";
 120         static const char badinfo[] = KERN_INFO
 121                 "rc: Warning: null riscom port for device %s in %s\n";
 122
 123         if (!port) {
 124                 printk(badinfo, name, routine);
 125                 return 1;
 126         }
 127         if (port->magic != RISCOM8_MAGIC) {
 128                 printk(badmagic, name, routine);
 129                 return 1;
 130         }
 131 #endif
 132         return 0;
 133 }
 134
 135 /*
 136  *
 137  *  Service functions for RISCom/8 driver.
 138  *
 139  */
 140
 141 /* Get board number from pointer */
 142 static inline int board_No (struct riscom_board const * bp)
 143 {
 144         return bp - rc_board;
 145 }
 146
 147 /* Get port number from pointer */
 148 static inline int port_No (struct riscom_port const * port)
 149 {
 150         return RC_PORT(port - rc_port);
 151 }
 152
 153 /* Get pointer to board from pointer to port */
 154 static inline struct riscom_board * port_Board(struct riscom_port const * port)
 155 {
 156         return &rc_board[RC_BOARD(port - rc_port)];
 157 }
 158
 159 /* Input Byte from CL CD180 register */
 160 static inline unsigned char rc_in(struct riscom_board const * bp, unsigned short reg)
 161 {
 162         return inb(bp->base + RC_TO_ISA(reg));
 163 }
 164
 165 /* Output Byte to CL CD180 register */
 166 static inline void rc_out(struct riscom_board const * bp, unsigned short reg,
 167                           unsigned char val)
 168 {
 169         outb(val, bp->base + RC_TO_ISA(reg));
 170 }
 171
 172 /* Wait for Channel Command Register ready */
 173 static inline void rc_wait_CCR(struct riscom_board const * bp)
 174 {
 175         unsigned long delay;
 176
 177         /* FIXME: need something more descriptive then 100000 :) */
 178         for (delay = 100000; delay; delay--)
 179                 if (!rc_in(bp, CD180_CCR))
 180                         return;
 181
 182         printk(KERN_INFO "rc%d: Timeout waiting for CCR.\n", board_No(bp));
 183 }
 184
 185 /*
 186  *  RISCom/8 probe functions.
 187  */
 188
 189 static inline int rc_request_io_range(struct riscom_board * const bp)
 190 {
 191         int i;
 192
 193         for (i = 0; i < RC_NIOPORT; i++)
 194                 if (!request_region(RC_TO_ISA(rc_ioport[i]) + bp->base, 1,
 195                                    "RISCom/8"))  {
 196                         goto out_release;
 197                 }
 198         return 0;
 199 out_release:
 200         printk(KERN_INFO "rc%d: Skipping probe at 0x%03x. IO address in use.\n",
 201                          board_No(bp), bp->base);
 202         while(--i >= 0)
 203                 release_region(RC_TO_ISA(rc_ioport[i]) + bp->base, 1);
 204         return 1;
 205 }
 206
 207 static inline void rc_release_io_range(struct riscom_board * const bp)
 208 {
 209         int i;
 210
 211         for (i = 0; i < RC_NIOPORT; i++)
 212                 release_region(RC_TO_ISA(rc_ioport[i]) + bp->base, 1);
 213 }
 214
 215 /* Reset and setup CD180 chip */
 216 static void __init rc_init_CD180(struct riscom_board const * bp)
 217 {
 218         unsigned long flags;
 219
 220         save_flags(flags); cli();
 221         rc_out(bp, RC_CTOUT, 0);                   /* Clear timeout             */
 222         rc_wait_CCR(bp);                           /* Wait for CCR ready        */
 223         rc_out(bp, CD180_CCR, CCR_HARDRESET);      /* Reset CD180 chip          */
 224         sti();
 225         msleep(50);                                /* Delay 0.05 sec            */
 226         cli();
 227         rc_out(bp, CD180_GIVR, RC_ID);             /* Set ID for this chip      */
 228         rc_out(bp, CD180_GICR, 0);                 /* Clear all bits            */
 229         rc_out(bp, CD180_PILR1, RC_ACK_MINT);      /* Prio for modem intr       */
 230         rc_out(bp, CD180_PILR2, RC_ACK_TINT);      /* Prio for transmitter intr */
 231         rc_out(bp, CD180_PILR3, RC_ACK_RINT);      /* Prio for receiver intr    */
 232
 233         /* Setting up prescaler. We need 4 ticks per 1 ms */
 234         rc_out(bp, CD180_PPRH, (RC_OSCFREQ/(1000000/RISCOM_TPS)) >> 8);
 235         rc_out(bp, CD180_PPRL, (RC_OSCFREQ/(1000000/RISCOM_TPS)) & 0xff);
 236
 237         restore_flags(flags);
 238 }
 239
 240 /* Main probing routine, also sets irq. */
 241 static int __init rc_probe(struct riscom_board *bp)
 242 {
 243         unsigned char val1, val2;
 244         int irqs = 0;
 245         int retries;
 246
 247         bp->irq = 0;
 248
 249         if (rc_request_io_range(bp))
 250                 return 1;
 251
 252         /* Are the I/O ports here ? */
 253         rc_out(bp, CD180_PPRL, 0x5a);
 254         outb(0xff, 0x80);
 255         val1 = rc_in(bp, CD180_PPRL);
 256         rc_out(bp, CD180_PPRL, 0xa5);
 257         outb(0x00, 0x80);
 258         val2 = rc_in(bp, CD180_PPRL);
 259
 260         if ((val1 != 0x5a) || (val2 != 0xa5))  {
 261                 printk(KERN_ERR "rc%d: RISCom/8 Board at 0x%03x not found.\n",
 262                        board_No(bp), bp->base);
 263                 goto out_release;
 264         }
 265
 266         /* It's time to find IRQ for this board */
 267         for (retries = 0; retries < 5 && irqs <= 0; retries++)  {
 268                 irqs = probe_irq_on();
 269                 rc_init_CD180(bp);                      /* Reset CD180 chip       */
 270                 rc_out(bp, CD180_CAR, 2);               /* Select port 2          */
 271                 rc_wait_CCR(bp);
 272                 rc_out(bp, CD180_CCR, CCR_TXEN);        /* Enable transmitter     */
 273                 rc_out(bp, CD180_IER, IER_TXRDY);       /* Enable tx empty intr   */
 274                 msleep(50);
 275                 irqs = probe_irq_off(irqs);
 276                 val1 = rc_in(bp, RC_BSR);               /* Get Board Status reg   */
 277                 val2 = rc_in(bp, RC_ACK_TINT);          /* ACK interrupt          */
 278                 rc_init_CD180(bp);                      /* Reset CD180 again      */
 279
 280                 if ((val1 & RC_BSR_TINT) || (val2 != (RC_ID | GIVR_IT_TX)))  {
 281                         printk(KERN_ERR "rc%d: RISCom/8 Board at 0x%03x not "
 282                                         "found.\n", board_No(bp), bp->base);
 283                         goto out_release;
 284                 }
 285         }
 286
 287         if (irqs <= 0)  {
 288                 printk(KERN_ERR "rc%d: Can't find IRQ for RISCom/8 board "
 289                                 "at 0x%03x.\n", board_No(bp), bp->base);
 290                 goto out_release;
 291         }
 292         bp->irq = irqs;
 293         bp->flags |= RC_BOARD_PRESENT;
 294
 295         printk(KERN_INFO "rc%d: RISCom/8 Rev. %c board detected at "
 296                          "0x%03x, IRQ %d.\n",
 297                board_No(bp),
 298                (rc_in(bp, CD180_GFRCR) & 0x0f) + 'A',   /* Board revision */
 299                bp->base, bp->irq);
 300
 301         return 0;
 302 out_release:
 303         rc_release_io_range(bp);
 304         return 1;
 305 }
 306
 307 /*
 308  *
 309  *  Interrupt processing routines.
 310  *
 311  */
 312
 313 static inline void rc_mark_event(struct riscom_port * port, int event)
 314 {
 315         set_bit(event, &port->event);
 316         schedule_work(&port->tqueue);
 317 }
 318
 319 static inline struct riscom_port * rc_get_port(struct riscom_board const * bp,
 320                                                unsigned char const * what)
 321 {
 322         unsigned char channel;
 323         struct riscom_port * port;
 324
 325         channel = rc_in(bp, CD180_GICR) >> GICR_CHAN_OFF;
 326         if (channel < CD180_NCH)  {
 327                 port = &rc_port[board_No(bp) * RC_NPORT + channel];
 328                 if (port->flags & ASYNC_INITIALIZED)  {
 329                         return port;
 330                 }
 331         }
 332         printk(KERN_ERR "rc%d: %s interrupt from invalid port %d\n",
 333                board_No(bp), what, channel);
 334         return NULL;
 335 }
 336
 337 static inline void rc_receive_exc(struct riscom_board const * bp)
 338 {
 339         struct riscom_port *port;
 340         struct tty_struct *tty;
 341         unsigned char status;
 342         unsigned char ch, flag;
 343
 344         if (!(port = rc_get_port(bp, "Receive")))
 345                 return;
 346
 347         tty = port->tty;
 348
 349 #ifdef RC_REPORT_OVERRUN
 350         status = rc_in(bp, CD180_RCSR);
 351         if (status & RCSR_OE)
 352                 port->overrun++;
 353         status &= port->mark_mask;
 354 #else
 355         status = rc_in(bp, CD180_RCSR) & port->mark_mask;
 356 #endif
 357         ch = rc_in(bp, CD180_RDR);
 358         if (!status)  {
 359                 return;
 360         }
 361         if (status & RCSR_TOUT)  {
 362                 printk(KERN_WARNING "rc%d: port %d: Receiver timeout. "
 363                                     "Hardware problems ?\n",
 364                        board_No(bp), port_No(port));
 365                 return;
 366
 367         } else if (status & RCSR_BREAK)  {
 368                 printk(KERN_INFO "rc%d: port %d: Handling break...\n",
 369                        board_No(bp), port_No(port));
 370                 flag = TTY_BREAK;
 371                 if (port->flags & ASYNC_SAK)
 372                         do_SAK(tty);
 373
 374         } else if (status & RCSR_PE)
 375                 flag = TTY_PARITY;
 376
 377         else if (status & RCSR_FE)
 378                 flag = TTY_FRAME;
 379
 380         else if (status & RCSR_OE)
 381                 flag = TTY_OVERRUN;
 382
 383         else
 384                 flag = TTY_NORMAL;
 385
 386         tty_insert_flip_char(tty, ch, flag);
 387         tty_flip_buffer_push(tty);
 388 }
 389
 390 static inline void rc_receive(struct riscom_board const * bp)
 391 {
 392         struct riscom_port *port;
 393         struct tty_struct *tty;
 394         unsigned char count;
 395
 396         if (!(port = rc_get_port(bp, "Receive")))
 397                 return;
 398
 399         tty = port->tty;
 400
 401         count = rc_in(bp, CD180_RDCR);
 402
 403 #ifdef RC_REPORT_FIFO
 404         port->hits[count > 8 ? 9 : count]++;
 405 #endif
 406
 407         while (count--)  {
 408                 if (tty_buffer_request_room(tty, 1) == 0)  {
 409                         printk(KERN_WARNING "rc%d: port %d: Working around "
 410                                             "flip buffer overflow.\n",
 411                                board_No(bp), port_No(port));
 412                         break;
 413                 }
 414                 tty_insert_flip_char(tty, rc_in(bp, CD180_RDR), TTY_NORMAL);
 415         }
 416         tty_flip_buffer_push(tty);
 417 }
 418
 419 static inline void rc_transmit(struct riscom_board const * bp)
 420 {
 421         struct riscom_port *port;
 422         struct tty_struct *tty;
 423         unsigned char count;
 424
 425
 426         if (!(port = rc_get_port(bp, "Transmit")))
 427                 return;
 428
 429         tty = port->tty;
 430
 431         if (port->IER & IER_TXEMPTY)  {
 432                 /* FIFO drained */
 433                 rc_out(bp, CD180_CAR, port_No(port));
 434                 port->IER &= ~IER_TXEMPTY;
 435                 rc_out(bp, CD180_IER, port->IER);
 436                 return;
 437         }
 438
 439         if ((port->xmit_cnt <= 0 && !port->break_length)
 440             || tty->stopped || tty->hw_stopped)  {
 441                 rc_out(bp, CD180_CAR, port_No(port));
 442                 port->IER &= ~IER_TXRDY;
 443                 rc_out(bp, CD180_IER, port->IER);
 444                 return;
 445         }
 446
 447         if (port->break_length)  {
 448                 if (port->break_length > 0)  {
 449                         if (port->COR2 & COR2_ETC)  {
 450                                 rc_out(bp, CD180_TDR, CD180_C_ESC);
 451                                 rc_out(bp, CD180_TDR, CD180_C_SBRK);
 452                                 port->COR2 &= ~COR2_ETC;
 453                         }
 454                         count = min_t(int, port->break_length, 0xff);
 455                         rc_out(bp, CD180_TDR, CD180_C_ESC);
 456                         rc_out(bp, CD180_TDR, CD180_C_DELAY);
 457                         rc_out(bp, CD180_TDR, count);
 458                         if (!(port->break_length -= count))
 459                                 port->break_length--;
 460                 } else  {
 461                         rc_out(bp, CD180_TDR, CD180_C_ESC);
 462                         rc_out(bp, CD180_TDR, CD180_C_EBRK);
 463                         rc_out(bp, CD180_COR2, port->COR2);
 464                         rc_wait_CCR(bp);
 465                         rc_out(bp, CD180_CCR, CCR_CORCHG2);
 466                         port->break_length = 0;
 467                 }
 468                 return;
 469         }
 470
 471         count = CD180_NFIFO;
 472         do {
 473                 rc_out(bp, CD180_TDR, port->xmit_buf[port->xmit_tail++]);
 474                 port->xmit_tail = port->xmit_tail & (SERIAL_XMIT_SIZE-1);
 475                 if (--port->xmit_cnt <= 0)
 476                         break;
 477         } while (--count > 0);
 478
 479         if (port->xmit_cnt <= 0)  {
 480                 rc_out(bp, CD180_CAR, port_No(port));
 481                 port->IER &= ~IER_TXRDY;
 482                 rc_out(bp, CD180_IER, port->IER);
 483         }
 484         if (port->xmit_cnt <= port->wakeup_chars)
 485                 rc_mark_event(port, RS_EVENT_WRITE_WAKEUP);
 486 }
 487
 488 static inline void rc_check_modem(struct riscom_board const * bp)
 489 {
 490         struct riscom_port *port;
 491         struct tty_struct *tty;
 492         unsigned char mcr;
 493
 494         if (!(port = rc_get_port(bp, "Modem")))
 495                 return;
 496
 497         tty = port->tty;
 498
 499         mcr = rc_in(bp, CD180_MCR);
 500         if (mcr & MCR_CDCHG)  {
 501                 if (rc_in(bp, CD180_MSVR) & MSVR_CD)
 502                         wake_up_interruptible(&port->open_wait);
 503                 else
 504                         schedule_work(&port->tqueue_hangup);
 505         }
 506
 507 #ifdef RISCOM_BRAIN_DAMAGED_CTS
 508         if (mcr & MCR_CTSCHG)  {
 509                 if (rc_in(bp, CD180_MSVR) & MSVR_CTS)  {
 510                         tty->hw_stopped = 0;
 511                         port->IER |= IER_TXRDY;
 512                         if (port->xmit_cnt <= port->wakeup_chars)
 513                                 rc_mark_event(port, RS_EVENT_WRITE_WAKEUP);
 514                 } else  {
 515                         tty->hw_stopped = 1;
 516                         port->IER &= ~IER_TXRDY;
 517                 }
 518                 rc_out(bp, CD180_IER, port->IER);
 519         }
 520         if (mcr & MCR_DSRCHG)  {
 521                 if (rc_in(bp, CD180_MSVR) & MSVR_DSR)  {
 522                         tty->hw_stopped = 0;
 523                         port->IER |= IER_TXRDY;
 524                         if (port->xmit_cnt <= port->wakeup_chars)
 525                                 rc_mark_event(port, RS_EVENT_WRITE_WAKEUP);
 526                 } else  {
 527                         tty->hw_stopped = 1;
 528                         port->IER &= ~IER_TXRDY;
 529                 }
 530                 rc_out(bp, CD180_IER, port->IER);
 531         }
 532 #endif /* RISCOM_BRAIN_DAMAGED_CTS */
 533
 534         /* Clear change bits */
 535         rc_out(bp, CD180_MCR, 0);
 536 }
 537
 538 /* The main interrupt processing routine */
 539 static irqreturn_t rc_interrupt(int dummy, void * dev_id)
 540 {
 541         unsigned char status;
 542         unsigned char ack;
 543         struct riscom_board *bp = dev_id;
 544         unsigned long loop = 0;
 545         int handled = 0;
 546
 547         if (!(bp->flags & RC_BOARD_ACTIVE))
 548                 return IRQ_NONE;
 549
 550         while ((++loop < 16) && ((status = ~(rc_in(bp, RC_BSR))) &
 551                                  (RC_BSR_TOUT | RC_BSR_TINT |
 552                                   RC_BSR_MINT | RC_BSR_RINT))) {
 553                 handled = 1;
 554                 if (status & RC_BSR_TOUT)
 555                         printk(KERN_WARNING "rc%d: Got timeout. Hardware "
 556                                             "error?\n", board_No(bp));
 557
 558                 else if (status & RC_BSR_RINT) {
 559                         ack = rc_in(bp, RC_ACK_RINT);
 560
 561                         if (ack == (RC_ID | GIVR_IT_RCV))
 562                                 rc_receive(bp);
 563                         else if (ack == (RC_ID | GIVR_IT_REXC))
 564                                 rc_receive_exc(bp);
 565                         else
 566                                 printk(KERN_WARNING "rc%d: Bad receive ack "
 567                                                     "0x%02x.\n",
 568                                        board_No(bp), ack);
 569
 570                 } else if (status & RC_BSR_TINT) {
 571                         ack = rc_in(bp, RC_ACK_TINT);
 572
 573                         if (ack == (RC_ID | GIVR_IT_TX))
 574                                 rc_transmit(bp);
 575                         else
 576                                 printk(KERN_WARNING "rc%d: Bad transmit ack "
 577                                                     "0x%02x.\n",
 578                                        board_No(bp), ack);
 579
 580                 } else /* if (status & RC_BSR_MINT) */ {
 581                         ack = rc_in(bp, RC_ACK_MINT);
 582
 583                         if (ack == (RC_ID | GIVR_IT_MODEM))
 584                                 rc_check_modem(bp);
 585                         else
 586                                 printk(KERN_WARNING "rc%d: Bad modem ack "
 587                                                     "0x%02x.\n",
 588                                        board_No(bp), ack);
 589
 590                 }
 591
 592                 rc_out(bp, CD180_EOIR, 0);   /* Mark end of interrupt */
 593                 rc_out(bp, RC_CTOUT, 0);     /* Clear timeout flag    */
 594         }
 595         return IRQ_RETVAL(handled);
 596 }
 597
 598 /*
 599  *  Routines for open & close processing.
 600  */
 601
 602 /* Called with disabled interrupts */
 603 static int rc_setup_board(struct riscom_board * bp)
 604 {
 605         int error;
 606
 607         if (bp->flags & RC_BOARD_ACTIVE)
 608                 return 0;
 609
 610         error = request_irq(bp->irq, rc_interrupt, IRQF_DISABLED,
 611                             "RISCom/8", bp);
 612         if (error)
 613                 return error;
 614
 615         rc_out(bp, RC_CTOUT, 0);                /* Just in case         */
 616         bp->DTR = ~0;
 617         rc_out(bp, RC_DTR, bp->DTR);            /* Drop DTR on all ports */
 618
 619         bp->flags |= RC_BOARD_ACTIVE;
 620
 621         return 0;
 622 }
 623
 624 /* Called with disabled interrupts */
 625 static void rc_shutdown_board(struct riscom_board *bp)
 626 {
 627         if (!(bp->flags & RC_BOARD_ACTIVE))
 628                 return;
 629
 630         bp->flags &= ~RC_BOARD_ACTIVE;
 631
 632         free_irq(bp->irq, NULL);
 633
 634         bp->DTR = ~0;
 635         rc_out(bp, RC_DTR, bp->DTR);           /* Drop DTR on all ports */
 636
 637 }
 638
 639 /*
 640  * Setting up port characteristics.
 641  * Must be called with disabled interrupts
 642  */
 643 static void rc_change_speed(struct riscom_board *bp, struct riscom_port *port)
 644 {
 645         struct tty_struct *tty;
 646         unsigned long baud;
 647         long tmp;
 648         unsigned char cor1 = 0, cor3 = 0;
 649         unsigned char mcor1 = 0, mcor2 = 0;
 650
 651         if (!(tty = port->tty) || !tty->termios)
 652                 return;
 653
 654         port->IER  = 0;
 655         port->COR2 = 0;
 656         port->MSVR = MSVR_RTS;
 657
 658         baud = tty_get_baud_rate(tty);
 659
 660         /* Select port on the board */
 661         rc_out(bp, CD180_CAR, port_No(port));
 662
 663         if (!baud)  {
 664                 /* Drop DTR & exit */
 665                 bp->DTR |= (1u << port_No(port));
 666                 rc_out(bp, RC_DTR, bp->DTR);
 667                 return;
 668         } else  {
 669                 /* Set DTR on */
 670                 bp->DTR &= ~(1u << port_No(port));
 671                 rc_out(bp, RC_DTR, bp->DTR);
 672         }
 673
 674         /*
 675          * Now we must calculate some speed depended things
 676          */
 677
 678         /* Set baud rate for port */
 679         tmp = (((RC_OSCFREQ + baud/2) / baud +
 680                 CD180_TPC/2) / CD180_TPC);
 681
 682         rc_out(bp, CD180_RBPRH, (tmp >> 8) & 0xff);
 683         rc_out(bp, CD180_TBPRH, (tmp >> 8) & 0xff);
 684         rc_out(bp, CD180_RBPRL, tmp & 0xff);
 685         rc_out(bp, CD180_TBPRL, tmp & 0xff);
 686
 687         baud = (baud + 5) / 10;   /* Estimated CPS */
 688
 689         /* Two timer ticks seems enough to wakeup something like SLIP driver */
 690         tmp = ((baud + HZ/2) / HZ) * 2 - CD180_NFIFO;
 691         port->wakeup_chars = (tmp < 0) ? 0 : ((tmp >= SERIAL_XMIT_SIZE) ?
 692                                               SERIAL_XMIT_SIZE - 1 : tmp);
 693
 694         /* Receiver timeout will be transmission time for 1.5 chars */
 695         tmp = (RISCOM_TPS + RISCOM_TPS/2 + baud/2) / baud;
 696         tmp = (tmp > 0xff) ? 0xff : tmp;
 697         rc_out(bp, CD180_RTPR, tmp);
 698
 699         switch (C_CSIZE(tty))  {
 700          case CS5:
 701                 cor1 |= COR1_5BITS;
 702                 break;
 703          case CS6:
 704                 cor1 |= COR1_6BITS;
 705                 break;
 706          case CS7:
 707                 cor1 |= COR1_7BITS;
 708                 break;
 709          case CS8:
 710                 cor1 |= COR1_8BITS;
 711                 break;
 712         }
 713
 714         if (C_CSTOPB(tty))
 715                 cor1 |= COR1_2SB;
 716
 717         cor1 |= COR1_IGNORE;
 718         if (C_PARENB(tty))  {
 719                 cor1 |= COR1_NORMPAR;
 720                 if (C_PARODD(tty))
 721                         cor1 |= COR1_ODDP;
 722                 if (I_INPCK(tty))
 723                         cor1 &= ~COR1_IGNORE;
 724         }
 725         /* Set marking of some errors */
 726         port->mark_mask = RCSR_OE | RCSR_TOUT;
 727         if (I_INPCK(tty))
 728                 port->mark_mask |= RCSR_FE | RCSR_PE;
 729         if (I_BRKINT(tty) || I_PARMRK(tty))
 730                 port->mark_mask |= RCSR_BREAK;
 731         if (I_IGNPAR(tty))
 732                 port->mark_mask &= ~(RCSR_FE | RCSR_PE);
 733         if (I_IGNBRK(tty))  {
 734                 port->mark_mask &= ~RCSR_BREAK;
 735                 if (I_IGNPAR(tty))
 736                         /* Real raw mode. Ignore all */
 737                         port->mark_mask &= ~RCSR_OE;
 738         }
 739         /* Enable Hardware Flow Control */
 740         if (C_CRTSCTS(tty))  {
 741 #ifdef RISCOM_BRAIN_DAMAGED_CTS
 742                 port->IER |= IER_DSR | IER_CTS;
 743                 mcor1 |= MCOR1_DSRZD | MCOR1_CTSZD;
 744                 mcor2 |= MCOR2_DSROD | MCOR2_CTSOD;
 745                 tty->hw_stopped = !(rc_in(bp, CD180_MSVR) & (MSVR_CTS|MSVR_DSR));
 746 #else
 747                 port->COR2 |= COR2_CTSAE;
 748 #endif
 749         }
 750         /* Enable Software Flow Control. FIXME: I'm not sure about this */
 751         /* Some people reported that it works, but I still doubt */
 752         if (I_IXON(tty))  {
 753                 port->COR2 |= COR2_TXIBE;
 754                 cor3 |= (COR3_FCT | COR3_SCDE);
 755                 if (I_IXANY(tty))
 756                         port->COR2 |= COR2_IXM;
 757                 rc_out(bp, CD180_SCHR1, START_CHAR(tty));
 758                 rc_out(bp, CD180_SCHR2, STOP_CHAR(tty));
 759                 rc_out(bp, CD180_SCHR3, START_CHAR(tty));
 760                 rc_out(bp, CD180_SCHR4, STOP_CHAR(tty));
 761         }
 762         if (!C_CLOCAL(tty))  {
 763                 /* Enable CD check */
 764                 port->IER |= IER_CD;
 765                 mcor1 |= MCOR1_CDZD;
 766                 mcor2 |= MCOR2_CDOD;
 767         }
 768
 769         if (C_CREAD(tty))
 770                 /* Enable receiver */
 771                 port->IER |= IER_RXD;
 772
 773         /* Set input FIFO size (1-8 bytes) */
 774         cor3 |= RISCOM_RXFIFO;
 775         /* Setting up CD180 channel registers */
 776         rc_out(bp, CD180_COR1, cor1);
 777         rc_out(bp, CD180_COR2, port->COR2);
 778         rc_out(bp, CD180_COR3, cor3);
 779         /* Make CD180 know about registers change */
 780         rc_wait_CCR(bp);
 781         rc_out(bp, CD180_CCR, CCR_CORCHG1 | CCR_CORCHG2 | CCR_CORCHG3);
 782         /* Setting up modem option registers */
 783         rc_out(bp, CD180_MCOR1, mcor1);
 784         rc_out(bp, CD180_MCOR2, mcor2);
 785         /* Enable CD180 transmitter & receiver */
 786         rc_wait_CCR(bp);
 787         rc_out(bp, CD180_CCR, CCR_TXEN | CCR_RXEN);
 788         /* Enable interrupts */
 789         rc_out(bp, CD180_IER, port->IER);
 790         /* And finally set RTS on */
 791         rc_out(bp, CD180_MSVR, port->MSVR);
 792 }
 793
 794 /* Must be called with interrupts enabled */
 795 static int rc_setup_port(struct riscom_board *bp, struct riscom_port *port)
 796 {
 797         unsigned long flags;
 798
 799         if (port->flags & ASYNC_INITIALIZED)
 800                 return 0;
 801
 802         if (!port->xmit_buf) {
 803                 /* We may sleep in get_zeroed_page() */
 804                 unsigned long tmp;
 805
 806                 if (!(tmp = get_zeroed_page(GFP_KERNEL)))
 807                         return -ENOMEM;
 808
 809                 if (port->xmit_buf) {
 810                         free_page(tmp);
 811                         return -ERESTARTSYS;
 812                 }
 813                 port->xmit_buf = (unsigned char *) tmp;
 814         }
 815
 816         save_flags(flags); cli();
 817
 818         if (port->tty)
 819                 clear_bit(TTY_IO_ERROR, &port->tty->flags);
 820
 821         if (port->count == 1)
 822                 bp->count++;
 823
 824         port->xmit_cnt = port->xmit_head = port->xmit_tail = 0;
 825         rc_change_speed(bp, port);
 826         port->flags |= ASYNC_INITIALIZED;
 827
 828         restore_flags(flags);
 829         return 0;
 830 }
 831
 832 /* Must be called with interrupts disabled */
 833 static void rc_shutdown_port(struct riscom_board *bp, struct riscom_port *port)
 834 {
 835         struct tty_struct *tty;
 836
 837         if (!(port->flags & ASYNC_INITIALIZED))
 838                 return;
 839
 840 #ifdef RC_REPORT_OVERRUN
 841         printk(KERN_INFO "rc%d: port %d: Total %ld overruns were detected.\n",
 842                board_No(bp), port_No(port), port->overrun);
 843 #endif
 844 #ifdef RC_REPORT_FIFO
 845         {
 846                 int i;
 847
 848                 printk(KERN_INFO "rc%d: port %d: FIFO hits [ ",
 849                        board_No(bp), port_No(port));
 850                 for (i = 0; i < 10; i++)  {
 851                         printk("%ld ", port->hits[i]);
 852                 }
 853                 printk("].\n");
 854         }
 855 #endif
 856         if (port->xmit_buf)  {
 857                 free_page((unsigned long) port->xmit_buf);
 858                 port->xmit_buf = NULL;
 859         }
 860
 861         if (!(tty = port->tty) || C_HUPCL(tty))  {
 862                 /* Drop DTR */
 863                 bp->DTR |= (1u << port_No(port));
 864                 rc_out(bp, RC_DTR, bp->DTR);
 865         }
 866
 867         /* Select port */
 868         rc_out(bp, CD180_CAR, port_No(port));
 869         /* Reset port */
 870         rc_wait_CCR(bp);
 871         rc_out(bp, CD180_CCR, CCR_SOFTRESET);
 872         /* Disable all interrupts from this port */
 873         port->IER = 0;
 874         rc_out(bp, CD180_IER, port->IER);
 875
 876         if (tty)
 877                 set_bit(TTY_IO_ERROR, &tty->flags);
 878         port->flags &= ~ASYNC_INITIALIZED;
 879
 880         if (--bp->count < 0)  {
 881                 printk(KERN_INFO "rc%d: rc_shutdown_port: "
 882                                  "bad board count: %d\n",
 883                        board_No(bp), bp->count);
 884                 bp->count = 0;
 885         }
 886
 887         /*
 888          * If this is the last opened port on the board
 889          * shutdown whole board
 890          */
 891         if (!bp->count)
 892                 rc_shutdown_board(bp);
 893 }
 894
 895
 896 static int block_til_ready(struct tty_struct *tty, struct file * filp,
 897                            struct riscom_port *port)
 898 {
 899         DECLARE_WAITQUEUE(wait, current);
 900         struct riscom_board *bp = port_Board(port);
 901         int    retval;
 902         int    do_clocal = 0;
 903         int    CD;
 904
 905         /*
 906          * If the device is in the middle of being closed, then block
 907          * until it's done, and then try again.
 908          */
 909         if (tty_hung_up_p(filp) || port->flags & ASYNC_CLOSING) {
 910                 interruptible_sleep_on(&port->close_wait);
 911                 if (port->flags & ASYNC_HUP_NOTIFY)
 912                         return -EAGAIN;
 913                 else
 914                         return -ERESTARTSYS;
 915         }
 916
 917         /*
 918          * If non-blocking mode is set, or the port is not enabled,
 919          * then make the check up front and then exit.
 920          */
 921         if ((filp->f_flags & O_NONBLOCK) ||
 922             (tty->flags & (1 << TTY_IO_ERROR))) {
 923                 port->flags |= ASYNC_NORMAL_ACTIVE;
 924                 return 0;
 925         }
 926
 927         if (C_CLOCAL(tty))
 928                 do_clocal = 1;
 929
 930         /*
 931          * Block waiting for the carrier detect and the line to become
 932          * free (i.e., not in use by the callout).  While we are in
 933          * this loop, info->count is dropped by one, so that
 934          * rs_close() knows when to free things.  We restore it upon
 935          * exit, either normal or abnormal.
 936          */
 937         retval = 0;
 938         add_wait_queue(&port->open_wait, &wait);
 939         cli();
 940         if (!tty_hung_up_p(filp))
 941                 port->count--;
 942         sti();
 943         port->blocked_open++;
 944         while (1) {
 945                 cli();
 946                 rc_out(bp, CD180_CAR, port_No(port));
 947                 CD = rc_in(bp, CD180_MSVR) & MSVR_CD;
 948                 rc_out(bp, CD180_MSVR, MSVR_RTS);
 949                 bp->DTR &= ~(1u << port_No(port));
 950                 rc_out(bp, RC_DTR, bp->DTR);
 951                 sti();
 952                 set_current_state(TASK_INTERRUPTIBLE);
 953                 if (tty_hung_up_p(filp) ||
 954                     !(port->flags & ASYNC_INITIALIZED)) {
 955                         if (port->flags & ASYNC_HUP_NOTIFY)
 956                                 retval = -EAGAIN;
 957                         else
 958                                 retval = -ERESTARTSYS;
 959                         break;
 960                 }
 961                 if (!(port->flags & ASYNC_CLOSING) &&
 962                     (do_clocal || CD))
 963                         break;
 964                 if (signal_pending(current)) {
 965                         retval = -ERESTARTSYS;
 966                         break;
 967                 }
 968                 schedule();
 969         }
 970         __set_current_state(TASK_RUNNING);
 971         remove_wait_queue(&port->open_wait, &wait);
 972         if (!tty_hung_up_p(filp))
 973                 port->count++;
 974         port->blocked_open--;
 975         if (retval)
 976                 return retval;
 977
 978         port->flags |= ASYNC_NORMAL_ACTIVE;
 979         return 0;
 980 }
 981
 982 static int rc_open(struct tty_struct * tty, struct file * filp)
 983 {
 984         int board;
 985         int error;
 986         struct riscom_port * port;
 987         struct riscom_board * bp;
 988
 989         board = RC_BOARD(tty->index);
 990         if (board >= RC_NBOARD || !(rc_board[board].flags & RC_BOARD_PRESENT))
 991                 return -ENODEV;
 992
 993         bp = &rc_board[board];
 994         port = rc_port + board * RC_NPORT + RC_PORT(tty->index);
 995         if (rc_paranoia_check(port, tty->name, "rc_open"))
 996                 return -ENODEV;
 997
 998         if ((error = rc_setup_board(bp)))
 999                 return error;
1000
1001         port->count++;
1002         tty->driver_data = port;
1003         port->tty = tty;
1004
1005         if ((error = rc_setup_port(bp, port)))
1006                 return error;
1007
1008         if ((error = block_til_ready(tty, filp, port)))
1009                 return error;
1010
1011         return 0;
1012 }
1013
1014 static void rc_close(struct tty_struct * tty, struct file * filp)
1015 {
1016         struct riscom_port *port = (struct riscom_port *) tty->driver_data;
1017         struct riscom_board *bp;
1018         unsigned long flags;
1019         unsigned long timeout;
1020
1021         if (!port || rc_paranoia_check(port, tty->name, "close"))
1022                 return;
1023
1024         save_flags(flags); cli();
1025         if (tty_hung_up_p(filp))
1026                 goto out;
1027
1028         bp = port_Board(port);
1029         if ((tty->count == 1) && (port->count != 1))  {
1030                 printk(KERN_INFO "rc%d: rc_close: bad port count;"
1031                        " tty->count is 1, port count is %d\n",
1032                        board_No(bp), port->count);
1033                 port->count = 1;
1034         }
1035         if (--port->count < 0)  {
1036                 printk(KERN_INFO "rc%d: rc_close: bad port count "
1037                                  "for tty%d: %d\n",
1038                        board_No(bp), port_No(port), port->count);
1039                 port->count = 0;
1040         }
1041         if (port->count)
1042                 goto out;
1043         port->flags |= ASYNC_CLOSING;
1044         /*
1045          * Now we wait for the transmit buffer to clear; and we notify
1046          * the line discipline to only process XON/XOFF characters.
1047          */
1048         tty->closing = 1;
1049         if (port->closing_wait != ASYNC_CLOSING_WAIT_NONE)
1050                 tty_wait_until_sent(tty, port->closing_wait);
1051         /*
1052          * At this point we stop accepting input.  To do this, we
1053          * disable the receive line status interrupts, and tell the
1054          * interrupt driver to stop checking the data ready bit in the
1055          * line status register.
1056          */
1057         port->IER &= ~IER_RXD;
1058         if (port->flags & ASYNC_INITIALIZED) {
1059                 port->IER &= ~IER_TXRDY;
1060                 port->IER |= IER_TXEMPTY;
1061                 rc_out(bp, CD180_CAR, port_No(port));
1062                 rc_out(bp, CD180_IER, port->IER);
1063                 /*
1064                  * Before we drop DTR, make sure the UART transmitter
1065                  * has completely drained; this is especially
1066                  * important if there is a transmit FIFO!
1067                  */
1068                 timeout = jiffies+HZ;
1069                 while(port->IER & IER_TXEMPTY)  {
1070                         msleep_interruptible(jiffies_to_msecs(port->timeout));
1071                         if (time_after(jiffies, timeout))
1072                                 break;
1073                 }
1074         }
1075         rc_shutdown_port(bp, port);
1076         if (tty->driver->flush_buffer)
1077                 tty->driver->flush_buffer(tty);
1078         tty_ldisc_flush(tty);
1079
1080         tty->closing = 0;
1081         port->event = 0;
1082         port->tty = NULL;
1083         if (port->blocked_open) {
1084                 if (port->close_delay) {
1085                         msleep_interruptible(jiffies_to_msecs(port->close_delay));
1086                 }
1087                 wake_up_interruptible(&port->open_wait);
1088         }
1089         port->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
1090         wake_up_interruptible(&port->close_wait);
1091 out:    restore_flags(flags);
1092 }
1093
1094 static int rc_write(struct tty_struct * tty,
1095                     const unsigned char *buf, int count)
1096 {
1097         struct riscom_port *port = (struct riscom_port *)tty->driver_data;
1098         struct riscom_board *bp;
1099         int c, total = 0;
1100         unsigned long flags;
1101
1102         if (rc_paranoia_check(port, tty->name, "rc_write"))
1103                 return 0;
1104
1105         bp = port_Board(port);
1106
1107         if (!tty || !port->xmit_buf)
1108                 return 0;
1109
1110         save_flags(flags);
1111         while (1) {
1112                 cli();
1113                 c = min_t(int, count, min(SERIAL_XMIT_SIZE - port->xmit_cnt - 1,
1114                                           SERIAL_XMIT_SIZE - port->xmit_head));
1115                 if (c <= 0) {
1116                         restore_flags(flags);
1117                         break;
1118                 }
1119
1120                 memcpy(port->xmit_buf + port->xmit_head, buf, c);
1121                 port->xmit_head = (port->xmit_head + c) & (SERIAL_XMIT_SIZE-1);
1122                 port->xmit_cnt += c;
1123                 restore_flags(flags);
1124
1125                 buf += c;
1126                 count -= c;
1127                 total += c;
1128         }
1129
1130         cli();
1131         if (port->xmit_cnt && !tty->stopped && !tty->hw_stopped &&
1132             !(port->IER & IER_TXRDY)) {
1133                 port->IER |= IER_TXRDY;
1134                 rc_out(bp, CD180_CAR, port_No(port));
1135                 rc_out(bp, CD180_IER, port->IER);
1136         }
1137         restore_flags(flags);
1138
1139         return total;
1140 }
1141
1142 static void rc_put_char(struct tty_struct * tty, unsigned char ch)
1143 {
1144         struct riscom_port *port = (struct riscom_port *)tty->driver_data;
1145         unsigned long flags;
1146
1147         if (rc_paranoia_check(port, tty->name, "rc_put_char"))
1148                 return;
1149
1150         if (!tty || !port->xmit_buf)
1151                 return;
1152
1153         save_flags(flags); cli();
1154
1155         if (port->xmit_cnt >= SERIAL_XMIT_SIZE - 1)
1156                 goto out;
1157
1158         port->xmit_buf[port->xmit_head++] = ch;
1159         port->xmit_head &= SERIAL_XMIT_SIZE - 1;
1160         port->xmit_cnt++;
1161 out:    restore_flags(flags);
1162 }
1163
1164 static void rc_flush_chars(struct tty_struct * tty)
1165 {
1166         struct riscom_port *port = (struct riscom_port *)tty->driver_data;
1167         unsigned long flags;
1168
1169         if (rc_paranoia_check(port, tty->name, "rc_flush_chars"))
1170                 return;
1171
1172         if (port->xmit_cnt <= 0 || tty->stopped || tty->hw_stopped ||
1173             !port->xmit_buf)
1174                 return;
1175
1176         save_flags(flags); cli();
1177         port->IER |= IER_TXRDY;
1178         rc_out(port_Board(port), CD180_CAR, port_No(port));
1179         rc_out(port_Board(port), CD180_IER, port->IER);
1180         restore_flags(flags);
1181 }
1182
1183 static int rc_write_room(struct tty_struct * tty)
1184 {
1185         struct riscom_port *port = (struct riscom_port *)tty->driver_data;
1186         int     ret;
1187
1188         if (rc_paranoia_check(port, tty->name, "rc_write_room"))
1189                 return 0;
1190
1191         ret = SERIAL_XMIT_SIZE - port->xmit_cnt - 1;
1192         if (ret < 0)
1193                 ret = 0;
1194         return ret;
1195 }
1196
1197 static int rc_chars_in_buffer(struct tty_struct *tty)
1198 {
1199         struct riscom_port *port = (struct riscom_port *)tty->driver_data;
1200
1201         if (rc_paranoia_check(port, tty->name, "rc_chars_in_buffer"))
1202                 return 0;
1203
1204         return port->xmit_cnt;
1205 }
1206
1207 static void rc_flush_buffer(struct tty_struct *tty)
1208 {
1209         struct riscom_port *port = (struct riscom_port *)tty->driver_data;
1210         unsigned long flags;
1211
1212         if (rc_paranoia_check(port, tty->name, "rc_flush_buffer"))
1213                 return;
1214
1215         save_flags(flags); cli();
1216         port->xmit_cnt = port->xmit_head = port->xmit_tail = 0;
1217         restore_flags(flags);
1218
1219         tty_wakeup(tty);
1220 }
1221
1222 static int rc_tiocmget(struct tty_struct *tty, struct file *file)
1223 {
1224         struct riscom_port *port = (struct riscom_port *)tty->driver_data;
1225         struct riscom_board * bp;
1226         unsigned char status;
1227         unsigned int result;
1228         unsigned long flags;
1229
1230         if (rc_paranoia_check(port, tty->name, __FUNCTION__))
1231                 return -ENODEV;
1232
1233         bp = port_Board(port);
1234         save_flags(flags); cli();
1235         rc_out(bp, CD180_CAR, port_No(port));
1236         status = rc_in(bp, CD180_MSVR);
1237         result = rc_in(bp, RC_RI) & (1u << port_No(port)) ? 0 : TIOCM_RNG;
1238         restore_flags(flags);
1239         result |= ((status & MSVR_RTS) ? TIOCM_RTS : 0)
1240                 | ((status & MSVR_DTR) ? TIOCM_DTR : 0)
1241                 | ((status & MSVR_CD)  ? TIOCM_CAR : 0)
1242                 | ((status & MSVR_DSR) ? TIOCM_DSR : 0)
1243                 | ((status & MSVR_CTS) ? TIOCM_CTS : 0);
1244         return result;
1245 }
1246
1247 static int rc_tiocmset(struct tty_struct *tty, struct file *file,
1248                        unsigned int set, unsigned int clear)
1249 {
1250         struct riscom_port *port = (struct riscom_port *)tty->driver_data;
1251         unsigned long flags;
1252         struct riscom_board *bp;
1253
1254         if (rc_paranoia_check(port, tty->name, __FUNCTION__))
1255                 return -ENODEV;
1256
1257         bp = port_Board(port);
1258
1259         save_flags(flags); cli();
1260         if (set & TIOCM_RTS)
1261                 port->MSVR |= MSVR_RTS;
1262         if (set & TIOCM_DTR)
1263                 bp->DTR &= ~(1u << port_No(port));
1264
1265         if (clear & TIOCM_RTS)
1266                 port->MSVR &= ~MSVR_RTS;
1267         if (clear & TIOCM_DTR)
1268                 bp->DTR |= (1u << port_No(port));
1269
1270         rc_out(bp, CD180_CAR, port_No(port));
1271         rc_out(bp, CD180_MSVR, port->MSVR);
1272         rc_out(bp, RC_DTR, bp->DTR);
1273         restore_flags(flags);
1274         return 0;
1275 }
1276
1277 static inline void rc_send_break(struct riscom_port * port, unsigned long length)
1278 {
1279         struct riscom_board *bp = port_Board(port);
1280         unsigned long flags;
1281
1282         save_flags(flags); cli();
1283         port->break_length = RISCOM_TPS / HZ * length;
1284         port->COR2 |= COR2_ETC;
1285         port->IER  |= IER_TXRDY;
1286         rc_out(bp, CD180_CAR, port_No(port));
1287         rc_out(bp, CD180_COR2, port->COR2);
1288         rc_out(bp, CD180_IER, port->IER);
1289         rc_wait_CCR(bp);
1290         rc_out(bp, CD180_CCR, CCR_CORCHG2);
1291         rc_wait_CCR(bp);
1292         restore_flags(flags);
1293 }
1294
1295 static inline int rc_set_serial_info(struct riscom_port * port,
1296                                      struct serial_struct __user * newinfo)
1297 {
1298         struct serial_struct tmp;
1299         struct riscom_board *bp = port_Board(port);
1300         int change_speed;
1301         unsigned long flags;
1302
1303         if (copy_from_user(&tmp, newinfo, sizeof(tmp)))
1304                 return -EFAULT;
1305
1306 #if 0
1307         if ((tmp.irq != bp->irq) ||
1308             (tmp.port != bp->base) ||
1309             (tmp.type != PORT_CIRRUS) ||
1310             (tmp.baud_base != (RC_OSCFREQ + CD180_TPC/2) / CD180_TPC) ||
1311             (tmp.custom_divisor != 0) ||
1312             (tmp.xmit_fifo_size != CD180_NFIFO) ||
1313             (tmp.flags & ~RISCOM_LEGAL_FLAGS))
1314                 return -EINVAL;
1315 #endif
1316
1317         change_speed = ((port->flags & ASYNC_SPD_MASK) !=
1318                         (tmp.flags & ASYNC_SPD_MASK));
1319
1320         if (!capable(CAP_SYS_ADMIN)) {
1321                 if ((tmp.close_delay != port->close_delay) ||
1322                     (tmp.closing_wait != port->closing_wait) ||
1323                     ((tmp.flags & ~ASYNC_USR_MASK) !=
1324                      (port->flags & ~ASYNC_USR_MASK)))
1325                         return -EPERM;
1326                 port->flags = ((port->flags & ~ASYNC_USR_MASK) |
1327                                (tmp.flags & ASYNC_USR_MASK));
1328         } else  {
1329                 port->flags = ((port->flags & ~ASYNC_FLAGS) |
1330                                (tmp.flags & ASYNC_FLAGS));
1331                 port->close_delay = tmp.close_delay;
1332                 port->closing_wait = tmp.closing_wait;
1333         }
1334         if (change_speed)  {
1335                 save_flags(flags); cli();
1336                 rc_change_speed(bp, port);
1337                 restore_flags(flags);
1338         }
1339         return 0;
1340 }
1341
1342 static inline int rc_get_serial_info(struct riscom_port * port,
1343                                      struct serial_struct __user *retinfo)
1344 {
1345         struct serial_struct tmp;
1346         struct riscom_board *bp = port_Board(port);
1347
1348         memset(&tmp, 0, sizeof(tmp));
1349         tmp.type = PORT_CIRRUS;
1350         tmp.line = port - rc_port;
1351         tmp.port = bp->base;
1352         tmp.irq  = bp->irq;
1353         tmp.flags = port->flags;
1354         tmp.baud_base = (RC_OSCFREQ + CD180_TPC/2) / CD180_TPC;
1355         tmp.close_delay = port->close_delay * HZ/100;
1356         tmp.closing_wait = port->closing_wait * HZ/100;
1357         tmp.xmit_fifo_size = CD180_NFIFO;
1358         return copy_to_user(retinfo, &tmp, sizeof(tmp)) ? -EFAULT : 0;
1359 }
1360
1361 static int rc_ioctl(struct tty_struct * tty, struct file * filp,
1362                     unsigned int cmd, unsigned long arg)
1363
1364 {
1365         struct riscom_port *port = (struct riscom_port *)tty->driver_data;
1366         void __user *argp = (void __user *)arg;
1367         int retval;
1368
1369         if (rc_paranoia_check(port, tty->name, "rc_ioctl"))
1370                 return -ENODEV;
1371
1372         switch (cmd) {
1373          case TCSBRK:   /* SVID version: non-zero arg --> no break */
1374                 retval = tty_check_change(tty);
1375                 if (retval)
1376                         return retval;
1377                 tty_wait_until_sent(tty, 0);
1378                 if (!arg)
1379                         rc_send_break(port, HZ/4);      /* 1/4 second */
1380                 break;
1381          case TCSBRKP:  /* support for POSIX tcsendbreak() */
1382                 retval = tty_check_change(tty);
1383                 if (retval)
1384                         return retval;
1385                 tty_wait_until_sent(tty, 0);
1386                 rc_send_break(port, arg ? arg*(HZ/10) : HZ/4);
1387                 break;
1388          case TIOCGSOFTCAR:
1389                 return put_user(C_CLOCAL(tty) ? 1 : 0, (unsigned __user *)argp);
1390          case TIOCSSOFTCAR:
1391                 if (get_user(arg,(unsigned __user *) argp))
1392                         return -EFAULT;
1393                 tty->termios->c_cflag =
1394                         ((tty->termios->c_cflag & ~CLOCAL) |
1395                         (arg ? CLOCAL : 0));
1396                 break;
1397          case TIOCGSERIAL:
1398                 return rc_get_serial_info(port, argp);
1399          case TIOCSSERIAL:
1400                 return rc_set_serial_info(port, argp);
1401          default:
1402                 return -ENOIOCTLCMD;
1403         }
1404         return 0;
1405 }
1406
1407 static void rc_throttle(struct tty_struct * tty)
1408 {
1409         struct riscom_port *port = (struct riscom_port *)tty->driver_data;
1410         struct riscom_board *bp;
1411         unsigned long flags;
1412
1413         if (rc_paranoia_check(port, tty->name, "rc_throttle"))
1414                 return;
1415
1416         bp = port_Board(port);
1417
1418         save_flags(flags); cli();
1419         port->MSVR &= ~MSVR_RTS;
1420         rc_out(bp, CD180_CAR, port_No(port));
1421         if (I_IXOFF(tty))  {
1422                 rc_wait_CCR(bp);
1423                 rc_out(bp, CD180_CCR, CCR_SSCH2);
1424                 rc_wait_CCR(bp);
1425         }
1426         rc_out(bp, CD180_MSVR, port->MSVR);
1427         restore_flags(flags);
1428 }
1429
1430 static void rc_unthrottle(struct tty_struct * tty)
1431 {
1432         struct riscom_port *port = (struct riscom_port *)tty->driver_data;
1433         struct riscom_board *bp;
1434         unsigned long flags;
1435
1436         if (rc_paranoia_check(port, tty->name, "rc_unthrottle"))
1437                 return;
1438
1439         bp = port_Board(port);
1440
1441         save_flags(flags); cli();
1442         port->MSVR |= MSVR_RTS;
1443         rc_out(bp, CD180_CAR, port_No(port));
1444         if (I_IXOFF(tty))  {
1445                 rc_wait_CCR(bp);
1446                 rc_out(bp, CD180_CCR, CCR_SSCH1);
1447                 rc_wait_CCR(bp);
1448         }
1449         rc_out(bp, CD180_MSVR, port->MSVR);
1450         restore_flags(flags);
1451 }
1452
1453 static void rc_stop(struct tty_struct * tty)
1454 {
1455         struct riscom_port *port = (struct riscom_port *)tty->driver_data;
1456         struct riscom_board *bp;
1457         unsigned long flags;
1458
1459         if (rc_paranoia_check(port, tty->name, "rc_stop"))
1460                 return;
1461
1462         bp = port_Board(port);
1463
1464         save_flags(flags); cli();
1465         port->IER &= ~IER_TXRDY;
1466         rc_out(bp, CD180_CAR, port_No(port));
1467         rc_out(bp, CD180_IER, port->IER);
1468         restore_flags(flags);
1469 }
1470
1471 static void rc_start(struct tty_struct * tty)
1472 {
1473         struct riscom_port *port = (struct riscom_port *)tty->driver_data;
1474         struct riscom_board *bp;
1475         unsigned long flags;
1476
1477         if (rc_paranoia_check(port, tty->name, "rc_start"))
1478                 return;
1479
1480         bp = port_Board(port);
1481
1482         save_flags(flags); cli();
1483         if (port->xmit_cnt && port->xmit_buf && !(port->IER & IER_TXRDY))  {
1484                 port->IER |= IER_TXRDY;
1485                 rc_out(bp, CD180_CAR, port_No(port));
1486                 rc_out(bp, CD180_IER, port->IER);
1487         }
1488         restore_flags(flags);
1489 }
1490
1491 /*
1492  * This routine is called from the work queue when the interrupt
1493  * routine has signalled that a hangup has occurred.  The path of
1494  * hangup processing is:
1495  *
1496  *      serial interrupt routine -> (workqueue) ->
1497  *      do_rc_hangup() -> tty->hangup() -> rc_hangup()
1498  *
1499  */
1500 static void do_rc_hangup(struct work_struct *ugly_api)
1501 {
1502         struct riscom_port      *port = container_of(ugly_api, struct riscom_port, tqueue_hangup);
1503         struct tty_struct       *tty;
1504
1505         tty = port->tty;
1506         if (tty)
1507                 tty_hangup(tty);        /* FIXME: module removal race still here */
1508 }
1509
1510 static void rc_hangup(struct tty_struct * tty)
1511 {
1512         struct riscom_port *port = (struct riscom_port *)tty->driver_data;
1513         struct riscom_board *bp;
1514
1515         if (rc_paranoia_check(port, tty->name, "rc_hangup"))
1516                 return;
1517
1518         bp = port_Board(port);
1519
1520         rc_shutdown_port(bp, port);
1521         port->event = 0;
1522         port->count = 0;
1523         port->flags &= ~ASYNC_NORMAL_ACTIVE;
1524         port->tty = NULL;
1525         wake_up_interruptible(&port->open_wait);
1526 }
1527
1528 static void rc_set_termios(struct tty_struct * tty, struct ktermios * old_termios)
1529 {
1530         struct riscom_port *port = (struct riscom_port *)tty->driver_data;
1531         unsigned long flags;
1532
1533         if (rc_paranoia_check(port, tty->name, "rc_set_termios"))
1534                 return;
1535
1536         if (tty->termios->c_cflag == old_termios->c_cflag &&
1537             tty->termios->c_iflag == old_termios->c_iflag)
1538                 return;
1539
1540         save_flags(flags); cli();
1541         rc_change_speed(port_Board(port), port);
1542         restore_flags(flags);
1543
1544         if ((old_termios->c_cflag & CRTSCTS) &&
1545             !(tty->termios->c_cflag & CRTSCTS)) {
1546                 tty->hw_stopped = 0;
1547                 rc_start(tty);
1548         }
1549 }
1550
1551 static void do_softint(struct work_struct *ugly_api)
1552 {
1553         struct riscom_port      *port = container_of(ugly_api, struct riscom_port, tqueue);
1554         struct tty_struct       *tty;
1555
1556         if(!(tty = port->tty))
1557                 return;
1558
1559         if (test_and_clear_bit(RS_EVENT_WRITE_WAKEUP, &port->event))
1560                 tty_wakeup(tty);
1561 }
1562
1563 static const struct tty_operations riscom_ops = {
1564         .open  = rc_open,
1565         .close = rc_close,
1566         .write = rc_write,
1567         .put_char = rc_put_char,
1568         .flush_chars = rc_flush_chars,
1569         .write_room = rc_write_room,
1570         .chars_in_buffer = rc_chars_in_buffer,
1571         .flush_buffer = rc_flush_buffer,
1572         .ioctl = rc_ioctl,
1573         .throttle = rc_throttle,
1574         .unthrottle = rc_unthrottle,
1575         .set_termios = rc_set_termios,
1576         .stop = rc_stop,
1577         .start = rc_start,
1578         .hangup = rc_hangup,
1579         .tiocmget = rc_tiocmget,
1580         .tiocmset = rc_tiocmset,
1581 };
1582
1583 static inline int rc_init_drivers(void)
1584 {
1585         int error;
1586         int i;
1587
1588         riscom_driver = alloc_tty_driver(RC_NBOARD * RC_NPORT);
1589         if (!riscom_driver)
1590                 return -ENOMEM;
1591
1592         riscom_driver->owner = THIS_MODULE;
1593         riscom_driver->name = "ttyL";
1594         riscom_driver->major = RISCOM8_NORMAL_MAJOR;
1595         riscom_driver->type = TTY_DRIVER_TYPE_SERIAL;
1596         riscom_driver->subtype = SERIAL_TYPE_NORMAL;
1597         riscom_driver->init_termios = tty_std_termios;
1598         riscom_driver->init_termios.c_cflag =
1599                 B9600 | CS8 | CREAD | HUPCL | CLOCAL;
1600         riscom_driver->init_termios.c_ispeed = 9600;
1601         riscom_driver->init_termios.c_ospeed = 9600;
1602         riscom_driver->flags = TTY_DRIVER_REAL_RAW;
1603         tty_set_operations(riscom_driver, &riscom_ops);
1604         if ((error = tty_register_driver(riscom_driver)))  {
1605                 put_tty_driver(riscom_driver);
1606                 printk(KERN_ERR "rc: Couldn't register RISCom/8 driver, "
1607                                 "error = %d\n",
1608                        error);
1609                 return 1;
1610         }
1611
1612         memset(rc_port, 0, sizeof(rc_port));
1613         for (i = 0; i < RC_NPORT * RC_NBOARD; i++)  {
1614                 rc_port[i].magic = RISCOM8_MAGIC;
1615                 INIT_WORK(&rc_port[i].tqueue, do_softint);
1616                 INIT_WORK(&rc_port[i].tqueue_hangup, do_rc_hangup);
1617                 rc_port[i].close_delay = 50 * HZ/100;
1618                 rc_port[i].closing_wait = 3000 * HZ/100;
1619                 init_waitqueue_head(&rc_port[i].open_wait);
1620                 init_waitqueue_head(&rc_port[i].close_wait);
1621         }
1622
1623         return 0;
1624 }
1625
1626 static void rc_release_drivers(void)
1627 {
1628         unsigned long flags;
1629
1630         save_flags(flags);
1631         cli();
1632         tty_unregister_driver(riscom_driver);
1633         put_tty_driver(riscom_driver);
1634         restore_flags(flags);
1635 }
1636
1637 #ifndef MODULE
1638 /*
1639  * Called at boot time.
1640  *
1641  * You can specify IO base for up to RC_NBOARD cards,
1642  * using line "riscom8=0xiobase1,0xiobase2,.." at LILO prompt.
1643  * Note that there will be no probing at default
1644  * addresses in this case.
1645  *
1646  */
1647 static int __init riscom8_setup(char *str)
1648 {
1649         int ints[RC_NBOARD];
1650         int i;
1651
1652         str = get_options(str, ARRAY_SIZE(ints), ints);
1653
1654         for (i = 0; i < RC_NBOARD; i++) {
1655                 if (i < ints[0])
1656                         rc_board[i].base = ints[i+1];
1657                 else
1658                         rc_board[i].base = 0;
1659         }
1660         return 1;
1661 }
1662
1663 __setup("riscom8=", riscom8_setup);
1664 #endif
1665
1666 static char banner[] __initdata =
1667         KERN_INFO "rc: SDL RISCom/8 card driver v1.1, (c) D.Gorodchanin "
1668                   "1994-1996.\n";
1669 static char no_boards_msg[] __initdata =
1670         KERN_INFO "rc: No RISCom/8 boards detected.\n";
1671
1672 /*
1673  * This routine must be called by kernel at boot time
1674  */
1675 static int __init riscom8_init(void)
1676 {
1677         int i;
1678         int found = 0;
1679
1680         printk(banner);
1681
1682         if (rc_init_drivers())
1683                 return -EIO;
1684
1685         for (i = 0; i < RC_NBOARD; i++)
1686                 if (rc_board[i].base && !rc_probe(&rc_board[i]))
1687                         found++;
1688
1689         if (!found)  {
1690                 rc_release_drivers();
1691                 printk(no_boards_msg);
1692                 return -EIO;
1693         }
1694         return 0;
1695 }
1696
1697 #ifdef MODULE
1698 static int iobase;
1699 static int iobase1;
1700 static int iobase2;
1701 static int iobase3;
1702 module_param(iobase, int, 0);
1703 module_param(iobase1, int, 0);
1704 module_param(iobase2, int, 0);
1705 module_param(iobase3, int, 0);
1706
1707 MODULE_LICENSE("GPL");
1708 #endif /* MODULE */
1709
1710 /*
1711  * You can setup up to 4 boards (current value of RC_NBOARD)
1712  * by specifying "iobase=0xXXX iobase1=0xXXX ..." as insmod parameter.
1713  *
1714  */
1715 static int __init riscom8_init_module (void)
1716 {
1717 #ifdef MODULE
1718         int i;
1719
1720         if (iobase || iobase1 || iobase2 || iobase3) {
1721                 for(i = 0; i < RC_NBOARD; i++)
1722                         rc_board[0].base = 0;
1723         }
1724
1725         if (iobase)
1726                 rc_board[0].base = iobase;
1727         if (iobase1)
1728                 rc_board[1].base = iobase1;
1729         if (iobase2)
1730                 rc_board[2].base = iobase2;
1731         if (iobase3)
1732                 rc_board[3].base = iobase3;
1733 #endif /* MODULE */
1734
1735         return riscom8_init();
1736 }
1737
1738 static void __exit riscom8_exit_module (void)
1739 {
1740         int i;
1741
1742         rc_release_drivers();
1743         for (i = 0; i < RC_NBOARD; i++)
1744                 if (rc_board[i].flags & RC_BOARD_PRESENT)
1745                         rc_release_io_range(&rc_board[i]);
1746
1747 }
1748
1749 module_init(riscom8_init_module);
1750 module_exit(riscom8_exit_module);
1751