2 # SATA/PATA driver configuration
6 tristate "Serial ATA (prod) and Parallel ATA (experimental) drivers"
9 depends on !(M32R || M68K) || BROKEN
12 If you want to use a ATA hard disk, ATA tape drive, ATA CD-ROM or
13 any other ATA device under Linux, say Y and make sure that you know
14 the name of your ATA host adapter (the card inside your computer
15 that "speaks" the ATA protocol, also called ATA controller),
16 because you will be asked for it.
18 NOTE: ATA enables basic SCSI support; *however*,
19 'SCSI disk support', 'SCSI tape support', or
20 'SCSI CDROM support' may also be needed,
21 depending on your hardware configuration.
25 config ATA_NONSTANDARD
30 bool "ATA ACPI Support"
31 depends on ACPI && PCI
35 This option adds support for ATA-related ACPI objects.
36 These ACPI objects add the ability to retrieve taskfiles
37 from the ACPI BIOS and write them to the disk controller.
38 These objects may be related to performance, security,
39 power management, or other areas.
40 You can disable this at kernel boot time by using the
41 option libata.noacpi=1
44 bool "SATA Port Multiplier support"
47 This option adds support for SATA Port Multipliers
48 (the SATA version of an ethernet hub, or SAS expander).
51 tristate "AHCI SATA support"
54 This option enables support for AHCI Serial ATA.
59 tristate "Silicon Image 3124/3132 SATA support"
62 This option enables support for Silicon Image 3124/3132 Serial ATA.
67 tristate "Freescale 3.0Gbps SATA support"
70 This option enables support for Freescale 3.0Gbps SATA controller.
71 It can be found on MPC837x and MPC8315.
76 bool "ATA SFF support"
79 This option adds support for ATA controllers with SFF
80 compliant or similar programming interface.
82 SFF is the legacy IDE interface that has been around since
83 the dawn of time. Almost all PATA controllers have an
84 SFF interface. Many SATA controllers have an SFF interface
85 when configured into a legacy compatibility mode.
87 For users with exclusively modern controllers like AHCI,
88 Silicon Image 3124, or Marvell 6440, you may choose to
89 disable this uneeded SFF support.
96 tristate "ServerWorks Frodo / Apple K2 SATA support"
99 This option enables support for Broadcom/Serverworks/Apple K2
105 tristate "Intel ESB, ICH, PIIX3, PIIX4 PATA/SATA support"
108 This option enables support for ICH5/6/7/8 Serial ATA
109 and support for PATA on the Intel ESB/ICH/PIIX3/PIIX4 series
115 tristate "Marvell SATA support (HIGHLY EXPERIMENTAL)"
116 depends on EXPERIMENTAL
118 This option enables support for the Marvell Serial ATA family.
119 Currently supports 88SX[56]0[48][01] chips.
124 tristate "NVIDIA SATA support"
127 This option enables support for NVIDIA Serial ATA.
132 tristate "Pacific Digital ADMA support"
135 This option enables support for Pacific Digital ADMA controllers
140 tristate "Pacific Digital SATA QStor support"
143 This option enables support for Pacific Digital Serial ATA QStor.
148 tristate "Promise SATA TX2/TX4 support"
151 This option enables support for Promise Serial ATA TX2/TX4.
156 tristate "Promise SATA SX4 support (Experimental)"
157 depends on PCI && EXPERIMENTAL
159 This option enables support for Promise Serial ATA SX4.
164 tristate "Silicon Image SATA support"
167 This option enables support for Silicon Image Serial ATA.
172 tristate "SiS 964/965/966/180 SATA support"
176 This option enables support for SiS Serial ATA on
177 SiS 964/965/966/180 and Parallel ATA on SiS 180.
178 The PATA support for SiS 180 requires additionally to
179 enable the PATA_SIS driver in the config.
183 tristate "ULi Electronics SATA support"
186 This option enables support for ULi Electronics SATA.
191 tristate "VIA SATA support"
194 This option enables support for VIA Serial ATA.
199 tristate "VITESSE VSC-7174 / INTEL 31244 SATA support"
202 This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA.
207 tristate "Initio 162x SATA support"
210 This option enables support for Initio 162x Serial ATA.
213 tristate "ACPI firmware driver for PATA"
216 This option enables an ACPI method driver which drives
217 motherboard PATA controller interfaces through the ACPI
218 firmware in the BIOS. This driver can sometimes handle
219 otherwise unsupported hardware.
222 tristate "ALi PATA support"
225 This option enables support for the ALi ATA interfaces
226 found on the many ALi chipsets.
231 tristate "AMD/NVidia PATA support"
234 This option enables support for the AMD and NVidia PATA
235 interfaces found on the chipsets for Athlon/Athlon64.
240 tristate "ARTOP 6210/6260 PATA support"
243 This option enables support for ARTOP PATA controllers.
248 tristate "Atmel AVR32 PATA support (Experimental)"
249 depends on AVR32 && PLATFORM_AT32AP && EXPERIMENTAL
251 This option enables support for the IDE devices on the
252 Atmel AT32AP platform.
257 tristate "ATI PATA support"
260 This option enables support for the ATI ATA interfaces
261 found on the many ATI chipsets.
265 config PATA_CMD640_PCI
266 tristate "CMD640 PCI PATA support (Experimental)"
267 depends on PCI && EXPERIMENTAL
269 This option enables support for the CMD640 PCI IDE
270 interface chip. Only the primary channel is currently
276 tristate "CMD64x PATA support"
279 This option enables support for the CMD64x series chips
280 except for the CMD640.
285 tristate "CS5510/5520 PATA support"
288 This option enables support for the Cyrix 5510/5520
289 companion chip used with the MediaGX/Geode processor family.
294 tristate "CS5530 PATA support"
297 This option enables support for the Cyrix/NatSemi/AMD CS5530
298 companion chip used with the MediaGX/Geode processor family.
303 tristate "CS5535 PATA support (Experimental)"
304 depends on PCI && X86 && !X86_64 && EXPERIMENTAL
306 This option enables support for the NatSemi/AMD CS5535
307 companion chip used with the Geode processor family.
312 tristate "CS5536 PATA support"
313 depends on PCI && X86 && !X86_64
315 This option enables support for the AMD CS5536
316 companion chip used with the Geode LX processor family.
321 tristate "Cypress CY82C693 PATA support (Very Experimental)"
322 depends on PCI && EXPERIMENTAL
324 This option enables support for the Cypress/Contaq CY82C693
325 chipset found in some Alpha systems
330 tristate "EFAR SLC90E66 support"
333 This option enables support for the EFAR SLC90E66
334 IDE controller found on some older machines.
339 tristate "Generic ATA support"
342 This option enables support for generic BIOS configured
343 ATA controllers via the new ATA layer
348 tristate "HPT 366/368 PATA support"
351 This option enables support for the HPT 366 and 368
352 PATA controllers via the new ATA layer.
357 tristate "HPT 370/370A/371/372/374/302 PATA support (Experimental)"
358 depends on PCI && EXPERIMENTAL
360 This option enables support for the majority of the later HPT
361 PATA controllers via the new ATA layer.
366 tristate "HPT 372N/302N PATA support (Experimental)"
367 depends on PCI && EXPERIMENTAL
369 This option enables support for the N variant HPT PATA
370 controllers via the new ATA layer
375 tristate "HPT 343/363 PATA support"
378 This option enables support for the HPT 343/363
379 PATA controllers via the new ATA layer
383 config PATA_HPT3X3_DMA
384 bool "HPT 343/363 DMA support (Experimental)"
385 depends on PATA_HPT3X3
387 This option enables DMA support for the HPT343/363
388 controllers. Enable with care as there are still some
389 problems with DMA on this chipset.
392 tristate "ISA Plug and Play PATA support"
395 This option enables support for ISA plug & play ATA
396 controllers such as those found on old soundcards.
401 tristate "IT8211/2 PATA support"
404 This option enables support for the ITE 8211 and 8212
405 PATA controllers via the new ATA layer, including RAID
411 tristate "IT8213 PATA support (Experimental)"
412 depends on PCI && EXPERIMENTAL
414 This option enables support for the ITE 821 PATA
415 controllers via the new ATA layer.
420 tristate "JMicron PATA support"
423 Enable support for the JMicron IDE controller, via the new
429 tristate "Legacy ISA PATA support (Experimental)"
430 depends on ISA && EXPERIMENTAL
432 This option enables support for ISA/VLB bus legacy PATA
433 ports and allows them to be accessed via the new ATA layer.
438 tristate "Compaq Triflex PATA support"
441 Enable support for the Compaq 'Triflex' IDE controller as found
442 on many Compaq Pentium-Pro systems, via the new ATA layer.
447 tristate "Marvell PATA support via legacy mode"
450 This option enables limited support for the Marvell 88SE61xx ATA
451 controllers. If you wish to use only the SATA ports then select
452 the AHCI driver alone. If you wish to the use the PATA port or
453 both SATA and PATA include this driver.
458 tristate "Freescale MPC52xx SoC internal IDE"
459 depends on PPC_MPC52xx && PPC_BESTCOMM
460 select PPC_BESTCOMM_ATA
462 This option enables support for integrated IDE controller
463 of the Freescale MPC52xx SoC.
468 tristate "Intel PATA MPIIX support"
471 This option enables support for MPIIX PATA support.
476 tristate "Intel PATA old PIIX support"
479 This option enables support for early PIIX PATA support.
484 tristate "NETCELL Revolution RAID support"
487 This option enables support for the Netcell Revolution RAID
493 tristate "Ninja32/Delkin Cardbus ATA support (Experimental)"
494 depends on PCI && EXPERIMENTAL
496 This option enables support for the Ninja32, Delkin and
497 possibly other brands of Cardbus ATA adapter
502 tristate "Nat Semi NS87410 PATA support"
505 This option enables support for the National Semiconductor
506 NS87410 PCI-IDE controller.
511 tristate "Nat Semi NS87415 PATA support"
514 This option enables support for the National Semiconductor
515 NS87415 PCI-IDE controller.
520 tristate "OPTI621/6215 PATA support (Very Experimental)"
521 depends on PCI && EXPERIMENTAL
523 This option enables full PIO support for the early Opti ATA
524 controllers found on some old motherboards.
529 tristate "OPTI FireStar PATA support (Very Experimental)"
530 depends on PCI && EXPERIMENTAL
532 This option enables DMA/PIO support for the later OPTi
533 controllers found on some old motherboards and in some
539 tristate "PCMCIA PATA support"
542 This option enables support for PCMCIA ATA interfaces, including
543 compact flash card adapters via the new ATA layer.
548 tristate "Older Promise PATA controller support"
551 This option enables support for the Promise 20246, 20262, 20263,
552 20265 and 20267 adapters.
557 tristate "QDI VLB PATA support"
560 Support for QDI 6500 and 6580 PATA controllers on VESA local bus.
563 tristate "RADISYS 82600 PATA support (Experimental)"
564 depends on PCI && EXPERIMENTAL
566 This option enables support for the RADISYS 82600
567 PATA controllers via the new ATA layer
572 tristate "RouterBoard 532 PATA CompactFlash support"
573 depends on MIKROTIK_RB532
575 This option enables support for the RouterBoard 532
576 PATA CompactFlash controller.
581 tristate "PC Tech RZ1000 PATA support"
584 This option enables basic support for the PC Tech RZ1000/1
585 PATA controllers via the new ATA layer
590 tristate "SC1200 PATA support"
593 This option enables support for the NatSemi/AMD SC1200 SoC
594 companion chip used with the Geode processor family.
598 config PATA_SERVERWORKS
599 tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support"
602 This option enables support for the Serverworks OSB4/CSB5/CSB6 and
603 HT1000 PATA controllers, via the new ATA layer.
608 tristate "Promise PATA 2027x support"
611 This option enables support for Promise PATA pdc20268 to pdc20277 host adapters.
616 tristate "CMD / Silicon Image 680 PATA support"
619 This option enables support for CMD / Silicon Image 680 PATA.
624 tristate "SiS PATA support"
627 This option enables support for SiS PATA controllers
632 tristate "VIA PATA support"
635 This option enables support for the VIA PATA interfaces
636 found on the many VIA chipsets.
641 tristate "Winbond SL82C105 PATA support"
644 This option enables support for SL82C105 PATA devices found in the
645 Netwinder and some other systems
649 config PATA_WINBOND_VLB
650 tristate "Winbond W83759A VLB PATA support (Experimental)"
651 depends on ISA && EXPERIMENTAL
653 Support for the Winbond W83759A controller on Vesa Local Bus
656 config HAVE_PATA_PLATFORM
659 This is an internal configuration node for any machine that
660 uses pata-platform driver to enable the relevant driver in the
661 configuration structure without having to submit endless patches
662 to update the PATA_PLATFORM entry.
665 tristate "Generic platform device PATA support"
666 depends on EMBEDDED || PPC || HAVE_PATA_PLATFORM
668 This option enables support for generic directly connected ATA
669 devices commonly found on embedded systems.
673 config PATA_OF_PLATFORM
674 tristate "OpenFirmware platform device PATA support"
675 depends on PATA_PLATFORM && PPC_OF
677 This option enables support for generic directly connected ATA
678 devices commonly found on embedded systems with OpenFirmware
684 tristate "Acorn ICS PATA support"
685 depends on ARM && ARCH_ACORN
687 On Acorn systems, say Y here if you wish to use the ICS PATA
688 interface card. This is not required for ICS partition support.
689 If you are unsure, say N to this.
691 config PATA_IXP4XX_CF
692 tristate "IXP4XX Compact Flash support"
693 depends on ARCH_IXP4XX
695 This option enables support for a Compact Flash connected on
696 the ixp4xx expansion bus. This driver had been written for
697 Loft/Avila boards in mind but can work with others.
702 tristate "Toshiba's Cell Reference Set IDE support"
703 depends on PCI && PPC_CELLEB
705 This option enables support for the built-in IDE controller on
706 Toshiba Cell Reference Board.
711 tristate "Intel SCH PATA support"
714 This option enables support for Intel SCH PATA on the Intel
715 SCH (US15W, US15L, UL11L) series host controllers.
720 tristate "Blackfin 54x ATAPI support"
721 depends on BF542 || BF548 || BF549
723 This option enables support for the built-in ATAPI controller on
724 Blackfin 54x family chips.