]> www.pilppa.org Git - linux-2.6-omap-h63xx.git/blob - drivers/acpi/utilities/utdebug.c
NOMMU: Support XIP on initramfs
[linux-2.6-omap-h63xx.git] / drivers / acpi / utilities / utdebug.c
1 /******************************************************************************
2  *
3  * Module Name: utdebug - Debug print routines
4  *
5  *****************************************************************************/
6
7 /*
8  * Copyright (C) 2000 - 2008, Intel Corp.
9  * All rights reserved.
10  *
11  * Redistribution and use in source and binary forms, with or without
12  * modification, are permitted provided that the following conditions
13  * are met:
14  * 1. Redistributions of source code must retain the above copyright
15  *    notice, this list of conditions, and the following disclaimer,
16  *    without modification.
17  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
18  *    substantially similar to the "NO WARRANTY" disclaimer below
19  *    ("Disclaimer") and any redistribution must be conditioned upon
20  *    including a substantially similar Disclaimer requirement for further
21  *    binary redistribution.
22  * 3. Neither the names of the above-listed copyright holders nor the names
23  *    of any contributors may be used to endorse or promote products derived
24  *    from this software without specific prior written permission.
25  *
26  * Alternatively, this software may be distributed under the terms of the
27  * GNU General Public License ("GPL") version 2 as published by the Free
28  * Software Foundation.
29  *
30  * NO WARRANTY
31  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
32  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
33  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
34  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
35  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
36  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
37  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
38  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
39  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
40  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
41  * POSSIBILITY OF SUCH DAMAGES.
42  */
43
44 #include <acpi/acpi.h>
45
46 #define _COMPONENT          ACPI_UTILITIES
47 ACPI_MODULE_NAME("utdebug")
48 #ifdef ACPI_DEBUG_OUTPUT
49 static acpi_thread_id acpi_gbl_prev_thread_id;
50 static char *acpi_gbl_fn_entry_str = "----Entry";
51 static char *acpi_gbl_fn_exit_str = "----Exit-";
52
53 /* Local prototypes */
54
55 static const char *acpi_ut_trim_function_name(const char *function_name);
56
57 /*******************************************************************************
58  *
59  * FUNCTION:    acpi_ut_init_stack_ptr_trace
60  *
61  * PARAMETERS:  None
62  *
63  * RETURN:      None
64  *
65  * DESCRIPTION: Save the current CPU stack pointer at subsystem startup
66  *
67  ******************************************************************************/
68
69 void acpi_ut_init_stack_ptr_trace(void)
70 {
71         acpi_size current_sp;
72
73         acpi_gbl_entry_stack_pointer = &current_sp;
74 }
75
76 /*******************************************************************************
77  *
78  * FUNCTION:    acpi_ut_track_stack_ptr
79  *
80  * PARAMETERS:  None
81  *
82  * RETURN:      None
83  *
84  * DESCRIPTION: Save the current CPU stack pointer
85  *
86  ******************************************************************************/
87
88 void acpi_ut_track_stack_ptr(void)
89 {
90         acpi_size current_sp;
91
92         if (&current_sp < acpi_gbl_lowest_stack_pointer) {
93                 acpi_gbl_lowest_stack_pointer = &current_sp;
94         }
95
96         if (acpi_gbl_nesting_level > acpi_gbl_deepest_nesting) {
97                 acpi_gbl_deepest_nesting = acpi_gbl_nesting_level;
98         }
99 }
100
101 /*******************************************************************************
102  *
103  * FUNCTION:    acpi_ut_trim_function_name
104  *
105  * PARAMETERS:  function_name       - Ascii string containing a procedure name
106  *
107  * RETURN:      Updated pointer to the function name
108  *
109  * DESCRIPTION: Remove the "Acpi" prefix from the function name, if present.
110  *              This allows compiler macros such as __func__ to be used
111  *              with no change to the debug output.
112  *
113  ******************************************************************************/
114
115 static const char *acpi_ut_trim_function_name(const char *function_name)
116 {
117
118         /* All Function names are longer than 4 chars, check is safe */
119
120         if (*(ACPI_CAST_PTR(u32, function_name)) == ACPI_PREFIX_MIXED) {
121
122                 /* This is the case where the original source has not been modified */
123
124                 return (function_name + 4);
125         }
126
127         if (*(ACPI_CAST_PTR(u32, function_name)) == ACPI_PREFIX_LOWER) {
128
129                 /* This is the case where the source has been 'linuxized' */
130
131                 return (function_name + 5);
132         }
133
134         return (function_name);
135 }
136
137 /*******************************************************************************
138  *
139  * FUNCTION:    acpi_ut_debug_print
140  *
141  * PARAMETERS:  requested_debug_level - Requested debug print level
142  *              line_number         - Caller's line number (for error output)
143  *              function_name       - Caller's procedure name
144  *              module_name         - Caller's module name
145  *              component_id        - Caller's component ID
146  *              Format              - Printf format field
147  *              ...                 - Optional printf arguments
148  *
149  * RETURN:      None
150  *
151  * DESCRIPTION: Print error message with prefix consisting of the module name,
152  *              line number, and component ID.
153  *
154  ******************************************************************************/
155
156 void ACPI_INTERNAL_VAR_XFACE
157 acpi_ut_debug_print(u32 requested_debug_level,
158                     u32 line_number,
159                     const char *function_name,
160                     const char *module_name,
161                     u32 component_id, const char *format, ...)
162 {
163         acpi_thread_id thread_id;
164         va_list args;
165
166         /*
167          * Stay silent if the debug level or component ID is disabled
168          */
169         if (!(requested_debug_level & acpi_dbg_level) ||
170             !(component_id & acpi_dbg_layer)) {
171                 return;
172         }
173
174         /*
175          * Thread tracking and context switch notification
176          */
177         thread_id = acpi_os_get_thread_id();
178         if (thread_id != acpi_gbl_prev_thread_id) {
179                 if (ACPI_LV_THREADS & acpi_dbg_level) {
180                         acpi_os_printf
181                             ("\n**** Context Switch from TID %lX to TID %lX ****\n\n",
182                              (unsigned long)acpi_gbl_prev_thread_id,
183                              (unsigned long)thread_id);
184                 }
185
186                 acpi_gbl_prev_thread_id = thread_id;
187         }
188
189         /*
190          * Display the module name, current line number, thread ID (if requested),
191          * current procedure nesting level, and the current procedure name
192          */
193         acpi_os_printf("%8s-%04ld ", module_name, line_number);
194
195         if (ACPI_LV_THREADS & acpi_dbg_level) {
196                 acpi_os_printf("[%04lX] ", (unsigned long)thread_id);
197         }
198
199         acpi_os_printf("[%02ld] %-22.22s: ",
200                        acpi_gbl_nesting_level,
201                        acpi_ut_trim_function_name(function_name));
202
203         va_start(args, format);
204         acpi_os_vprintf(format, args);
205         va_end(args);
206 }
207
208 ACPI_EXPORT_SYMBOL(acpi_ut_debug_print)
209
210 /*******************************************************************************
211  *
212  * FUNCTION:    acpi_ut_debug_print_raw
213  *
214  * PARAMETERS:  requested_debug_level - Requested debug print level
215  *              line_number         - Caller's line number
216  *              function_name       - Caller's procedure name
217  *              module_name         - Caller's module name
218  *              component_id        - Caller's component ID
219  *              Format              - Printf format field
220  *              ...                 - Optional printf arguments
221  *
222  * RETURN:      None
223  *
224  * DESCRIPTION: Print message with no headers.  Has same interface as
225  *              debug_print so that the same macros can be used.
226  *
227  ******************************************************************************/
228 void ACPI_INTERNAL_VAR_XFACE
229 acpi_ut_debug_print_raw(u32 requested_debug_level,
230                         u32 line_number,
231                         const char *function_name,
232                         const char *module_name,
233                         u32 component_id, const char *format, ...)
234 {
235         va_list args;
236
237         if (!(requested_debug_level & acpi_dbg_level) ||
238             !(component_id & acpi_dbg_layer)) {
239                 return;
240         }
241
242         va_start(args, format);
243         acpi_os_vprintf(format, args);
244         va_end(args);
245 }
246
247 ACPI_EXPORT_SYMBOL(acpi_ut_debug_print_raw)
248
249 /*******************************************************************************
250  *
251  * FUNCTION:    acpi_ut_trace
252  *
253  * PARAMETERS:  line_number         - Caller's line number
254  *              function_name       - Caller's procedure name
255  *              module_name         - Caller's module name
256  *              component_id        - Caller's component ID
257  *
258  * RETURN:      None
259  *
260  * DESCRIPTION: Function entry trace.  Prints only if TRACE_FUNCTIONS bit is
261  *              set in debug_level
262  *
263  ******************************************************************************/
264 void
265 acpi_ut_trace(u32 line_number,
266               const char *function_name,
267               const char *module_name, u32 component_id)
268 {
269
270         acpi_gbl_nesting_level++;
271         acpi_ut_track_stack_ptr();
272
273         acpi_ut_debug_print(ACPI_LV_FUNCTIONS,
274                             line_number, function_name, module_name,
275                             component_id, "%s\n", acpi_gbl_fn_entry_str);
276 }
277
278 ACPI_EXPORT_SYMBOL(acpi_ut_trace)
279
280 /*******************************************************************************
281  *
282  * FUNCTION:    acpi_ut_trace_ptr
283  *
284  * PARAMETERS:  line_number         - Caller's line number
285  *              function_name       - Caller's procedure name
286  *              module_name         - Caller's module name
287  *              component_id        - Caller's component ID
288  *              Pointer             - Pointer to display
289  *
290  * RETURN:      None
291  *
292  * DESCRIPTION: Function entry trace.  Prints only if TRACE_FUNCTIONS bit is
293  *              set in debug_level
294  *
295  ******************************************************************************/
296 void
297 acpi_ut_trace_ptr(u32 line_number,
298                   const char *function_name,
299                   const char *module_name, u32 component_id, void *pointer)
300 {
301         acpi_gbl_nesting_level++;
302         acpi_ut_track_stack_ptr();
303
304         acpi_ut_debug_print(ACPI_LV_FUNCTIONS,
305                             line_number, function_name, module_name,
306                             component_id, "%s %p\n", acpi_gbl_fn_entry_str,
307                             pointer);
308 }
309
310 /*******************************************************************************
311  *
312  * FUNCTION:    acpi_ut_trace_str
313  *
314  * PARAMETERS:  line_number         - Caller's line number
315  *              function_name       - Caller's procedure name
316  *              module_name         - Caller's module name
317  *              component_id        - Caller's component ID
318  *              String              - Additional string to display
319  *
320  * RETURN:      None
321  *
322  * DESCRIPTION: Function entry trace.  Prints only if TRACE_FUNCTIONS bit is
323  *              set in debug_level
324  *
325  ******************************************************************************/
326
327 void
328 acpi_ut_trace_str(u32 line_number,
329                   const char *function_name,
330                   const char *module_name, u32 component_id, char *string)
331 {
332
333         acpi_gbl_nesting_level++;
334         acpi_ut_track_stack_ptr();
335
336         acpi_ut_debug_print(ACPI_LV_FUNCTIONS,
337                             line_number, function_name, module_name,
338                             component_id, "%s %s\n", acpi_gbl_fn_entry_str,
339                             string);
340 }
341
342 /*******************************************************************************
343  *
344  * FUNCTION:    acpi_ut_trace_u32
345  *
346  * PARAMETERS:  line_number         - Caller's line number
347  *              function_name       - Caller's procedure name
348  *              module_name         - Caller's module name
349  *              component_id        - Caller's component ID
350  *              Integer             - Integer to display
351  *
352  * RETURN:      None
353  *
354  * DESCRIPTION: Function entry trace.  Prints only if TRACE_FUNCTIONS bit is
355  *              set in debug_level
356  *
357  ******************************************************************************/
358
359 void
360 acpi_ut_trace_u32(u32 line_number,
361                   const char *function_name,
362                   const char *module_name, u32 component_id, u32 integer)
363 {
364
365         acpi_gbl_nesting_level++;
366         acpi_ut_track_stack_ptr();
367
368         acpi_ut_debug_print(ACPI_LV_FUNCTIONS,
369                             line_number, function_name, module_name,
370                             component_id, "%s %08X\n", acpi_gbl_fn_entry_str,
371                             integer);
372 }
373
374 /*******************************************************************************
375  *
376  * FUNCTION:    acpi_ut_exit
377  *
378  * PARAMETERS:  line_number         - Caller's line number
379  *              function_name       - Caller's procedure name
380  *              module_name         - Caller's module name
381  *              component_id        - Caller's component ID
382  *
383  * RETURN:      None
384  *
385  * DESCRIPTION: Function exit trace.  Prints only if TRACE_FUNCTIONS bit is
386  *              set in debug_level
387  *
388  ******************************************************************************/
389
390 void
391 acpi_ut_exit(u32 line_number,
392              const char *function_name,
393              const char *module_name, u32 component_id)
394 {
395
396         acpi_ut_debug_print(ACPI_LV_FUNCTIONS,
397                             line_number, function_name, module_name,
398                             component_id, "%s\n", acpi_gbl_fn_exit_str);
399
400         acpi_gbl_nesting_level--;
401 }
402
403 ACPI_EXPORT_SYMBOL(acpi_ut_exit)
404
405 /*******************************************************************************
406  *
407  * FUNCTION:    acpi_ut_status_exit
408  *
409  * PARAMETERS:  line_number         - Caller's line number
410  *              function_name       - Caller's procedure name
411  *              module_name         - Caller's module name
412  *              component_id        - Caller's component ID
413  *              Status              - Exit status code
414  *
415  * RETURN:      None
416  *
417  * DESCRIPTION: Function exit trace.  Prints only if TRACE_FUNCTIONS bit is
418  *              set in debug_level. Prints exit status also.
419  *
420  ******************************************************************************/
421 void
422 acpi_ut_status_exit(u32 line_number,
423                     const char *function_name,
424                     const char *module_name,
425                     u32 component_id, acpi_status status)
426 {
427
428         if (ACPI_SUCCESS(status)) {
429                 acpi_ut_debug_print(ACPI_LV_FUNCTIONS,
430                                     line_number, function_name, module_name,
431                                     component_id, "%s %s\n",
432                                     acpi_gbl_fn_exit_str,
433                                     acpi_format_exception(status));
434         } else {
435                 acpi_ut_debug_print(ACPI_LV_FUNCTIONS,
436                                     line_number, function_name, module_name,
437                                     component_id, "%s ****Exception****: %s\n",
438                                     acpi_gbl_fn_exit_str,
439                                     acpi_format_exception(status));
440         }
441
442         acpi_gbl_nesting_level--;
443 }
444
445 ACPI_EXPORT_SYMBOL(acpi_ut_status_exit)
446
447 /*******************************************************************************
448  *
449  * FUNCTION:    acpi_ut_value_exit
450  *
451  * PARAMETERS:  line_number         - Caller's line number
452  *              function_name       - Caller's procedure name
453  *              module_name         - Caller's module name
454  *              component_id        - Caller's component ID
455  *              Value               - Value to be printed with exit msg
456  *
457  * RETURN:      None
458  *
459  * DESCRIPTION: Function exit trace.  Prints only if TRACE_FUNCTIONS bit is
460  *              set in debug_level. Prints exit value also.
461  *
462  ******************************************************************************/
463 void
464 acpi_ut_value_exit(u32 line_number,
465                    const char *function_name,
466                    const char *module_name,
467                    u32 component_id, acpi_integer value)
468 {
469
470         acpi_ut_debug_print(ACPI_LV_FUNCTIONS,
471                             line_number, function_name, module_name,
472                             component_id, "%s %8.8X%8.8X\n",
473                             acpi_gbl_fn_exit_str, ACPI_FORMAT_UINT64(value));
474
475         acpi_gbl_nesting_level--;
476 }
477
478 ACPI_EXPORT_SYMBOL(acpi_ut_value_exit)
479
480 /*******************************************************************************
481  *
482  * FUNCTION:    acpi_ut_ptr_exit
483  *
484  * PARAMETERS:  line_number         - Caller's line number
485  *              function_name       - Caller's procedure name
486  *              module_name         - Caller's module name
487  *              component_id        - Caller's component ID
488  *              Ptr                 - Pointer to display
489  *
490  * RETURN:      None
491  *
492  * DESCRIPTION: Function exit trace.  Prints only if TRACE_FUNCTIONS bit is
493  *              set in debug_level. Prints exit value also.
494  *
495  ******************************************************************************/
496 void
497 acpi_ut_ptr_exit(u32 line_number,
498                  const char *function_name,
499                  const char *module_name, u32 component_id, u8 *ptr)
500 {
501
502         acpi_ut_debug_print(ACPI_LV_FUNCTIONS,
503                             line_number, function_name, module_name,
504                             component_id, "%s %p\n", acpi_gbl_fn_exit_str, ptr);
505
506         acpi_gbl_nesting_level--;
507 }
508
509 #endif
510
511 /*******************************************************************************
512  *
513  * FUNCTION:    acpi_ut_dump_buffer
514  *
515  * PARAMETERS:  Buffer              - Buffer to dump
516  *              Count               - Amount to dump, in bytes
517  *              Display             - BYTE, WORD, DWORD, or QWORD display
518  *              component_iD        - Caller's component ID
519  *
520  * RETURN:      None
521  *
522  * DESCRIPTION: Generic dump buffer in both hex and ascii.
523  *
524  ******************************************************************************/
525
526 void acpi_ut_dump_buffer2(u8 * buffer, u32 count, u32 display)
527 {
528         u32 i = 0;
529         u32 j;
530         u32 temp32;
531         u8 buf_char;
532
533         if (!buffer) {
534                 acpi_os_printf("Null Buffer Pointer in DumpBuffer!\n");
535                 return;
536         }
537
538         if ((count < 4) || (count & 0x01)) {
539                 display = DB_BYTE_DISPLAY;
540         }
541
542         /* Nasty little dump buffer routine! */
543
544         while (i < count) {
545
546                 /* Print current offset */
547
548                 acpi_os_printf("%6.4X: ", i);
549
550                 /* Print 16 hex chars */
551
552                 for (j = 0; j < 16;) {
553                         if (i + j >= count) {
554
555                                 /* Dump fill spaces */
556
557                                 acpi_os_printf("%*s", ((display * 2) + 1), " ");
558                                 j += display;
559                                 continue;
560                         }
561
562                         switch (display) {
563                         case DB_BYTE_DISPLAY:
564                         default:        /* Default is BYTE display */
565
566                                 acpi_os_printf("%02X ",
567                                                buffer[(acpi_size) i + j]);
568                                 break;
569
570                         case DB_WORD_DISPLAY:
571
572                                 ACPI_MOVE_16_TO_32(&temp32,
573                                                    &buffer[(acpi_size) i + j]);
574                                 acpi_os_printf("%04X ", temp32);
575                                 break;
576
577                         case DB_DWORD_DISPLAY:
578
579                                 ACPI_MOVE_32_TO_32(&temp32,
580                                                    &buffer[(acpi_size) i + j]);
581                                 acpi_os_printf("%08X ", temp32);
582                                 break;
583
584                         case DB_QWORD_DISPLAY:
585
586                                 ACPI_MOVE_32_TO_32(&temp32,
587                                                    &buffer[(acpi_size) i + j]);
588                                 acpi_os_printf("%08X", temp32);
589
590                                 ACPI_MOVE_32_TO_32(&temp32,
591                                                    &buffer[(acpi_size) i + j +
592                                                            4]);
593                                 acpi_os_printf("%08X ", temp32);
594                                 break;
595                         }
596
597                         j += display;
598                 }
599
600                 /*
601                  * Print the ASCII equivalent characters but watch out for the bad
602                  * unprintable ones (printable chars are 0x20 through 0x7E)
603                  */
604                 acpi_os_printf(" ");
605                 for (j = 0; j < 16; j++) {
606                         if (i + j >= count) {
607                                 acpi_os_printf("\n");
608                                 return;
609                         }
610
611                         buf_char = buffer[(acpi_size) i + j];
612                         if (ACPI_IS_PRINT(buf_char)) {
613                                 acpi_os_printf("%c", buf_char);
614                         } else {
615                                 acpi_os_printf(".");
616                         }
617                 }
618
619                 /* Done with that line. */
620
621                 acpi_os_printf("\n");
622                 i += 16;
623         }
624
625         return;
626 }
627
628 /*******************************************************************************
629  *
630  * FUNCTION:    acpi_ut_dump_buffer
631  *
632  * PARAMETERS:  Buffer              - Buffer to dump
633  *              Count               - Amount to dump, in bytes
634  *              Display             - BYTE, WORD, DWORD, or QWORD display
635  *              component_iD        - Caller's component ID
636  *
637  * RETURN:      None
638  *
639  * DESCRIPTION: Generic dump buffer in both hex and ascii.
640  *
641  ******************************************************************************/
642
643 void acpi_ut_dump_buffer(u8 * buffer, u32 count, u32 display, u32 component_id)
644 {
645
646         /* Only dump the buffer if tracing is enabled */
647
648         if (!((ACPI_LV_TABLES & acpi_dbg_level) &&
649               (component_id & acpi_dbg_layer))) {
650                 return;
651         }
652
653         acpi_ut_dump_buffer2(buffer, count, display);
654 }