drivers/acpi/thermal.c

   1 /*
   2  *  acpi_thermal.c - ACPI Thermal Zone Driver ($Revision: 41 $)
   3  *
   4  *  Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com>
   5  *  Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
   6  *
   7  * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   8  *
   9  *  This program is free software; you can redistribute it and/or modify
  10  *  it under the terms of the GNU General Public License as published by
  11  *  the Free Software Foundation; either version 2 of the License, or (at
  12  *  your option) any later version.
  13  *
  14  *  This program is distributed in the hope that it will be useful, but
  15  *  WITHOUT ANY WARRANTY; without even the implied warranty of
  16  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  17  *  General Public License for more details.
  18  *
  19  *  You should have received a copy of the GNU General Public License along
  20  *  with this program; if not, write to the Free Software Foundation, Inc.,
  21  *  59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
  22  *
  23  * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  24  *
  25  *  This driver fully implements the ACPI thermal policy as described in the
  26  *  ACPI 2.0 Specification.
  27  *
  28  *  TBD: 1. Implement passive cooling hysteresis.
  29  *       2. Enhance passive cooling (CPU) states/limit interface to support
  30  *          concepts of 'multiple limiters', upper/lower limits, etc.
  31  *
  32  */
  33
  34 #include <linux/kernel.h>
  35 #include <linux/module.h>
  36 #include <linux/dmi.h>
  37 #include <linux/init.h>
  38 #include <linux/types.h>
  39 #include <linux/proc_fs.h>
  40 #include <linux/timer.h>
  41 #include <linux/jiffies.h>
  42 #include <linux/kmod.h>
  43 #include <linux/seq_file.h>
  44 #include <linux/reboot.h>
  45 #include <asm/uaccess.h>
  46 #include <linux/thermal.h>
  47 #include <acpi/acpi_bus.h>
  48 #include <acpi/acpi_drivers.h>
  49
  50 #define ACPI_THERMAL_COMPONENT          0x04000000
  51 #define ACPI_THERMAL_CLASS              "thermal_zone"
  52 #define ACPI_THERMAL_DEVICE_NAME        "Thermal Zone"
  53 #define ACPI_THERMAL_FILE_STATE         "state"
  54 #define ACPI_THERMAL_FILE_TEMPERATURE   "temperature"
  55 #define ACPI_THERMAL_FILE_TRIP_POINTS   "trip_points"
  56 #define ACPI_THERMAL_FILE_COOLING_MODE  "cooling_mode"
  57 #define ACPI_THERMAL_FILE_POLLING_FREQ  "polling_frequency"
  58 #define ACPI_THERMAL_NOTIFY_TEMPERATURE 0x80
  59 #define ACPI_THERMAL_NOTIFY_THRESHOLDS  0x81
  60 #define ACPI_THERMAL_NOTIFY_DEVICES     0x82
  61 #define ACPI_THERMAL_NOTIFY_CRITICAL    0xF0
  62 #define ACPI_THERMAL_NOTIFY_HOT         0xF1
  63 #define ACPI_THERMAL_MODE_ACTIVE        0x00
  64
  65 #define ACPI_THERMAL_MAX_ACTIVE 10
  66 #define ACPI_THERMAL_MAX_LIMIT_STR_LEN 65
  67
  68 #define _COMPONENT              ACPI_THERMAL_COMPONENT
  69 ACPI_MODULE_NAME("thermal");
  70
  71 MODULE_AUTHOR("Paul Diefenbaugh");
  72 MODULE_DESCRIPTION("ACPI Thermal Zone Driver");
  73 MODULE_LICENSE("GPL");
  74
  75 static int act;
  76 module_param(act, int, 0644);
  77 MODULE_PARM_DESC(act, "Disable or override all lowest active trip points.");
  78
  79 static int crt;
  80 module_param(crt, int, 0644);
  81 MODULE_PARM_DESC(crt, "Disable or lower all critical trip points.");
  82
  83 static int tzp;
  84 module_param(tzp, int, 0444);
  85 MODULE_PARM_DESC(tzp, "Thermal zone polling frequency, in 1/10 seconds.");
  86
  87 static int nocrt;
  88 module_param(nocrt, int, 0);
  89 MODULE_PARM_DESC(nocrt, "Set to take no action upon ACPI thermal zone critical trips points.");
  90
  91 static int off;
  92 module_param(off, int, 0);
  93 MODULE_PARM_DESC(off, "Set to disable ACPI thermal support.");
  94
  95 static int psv;
  96 module_param(psv, int, 0644);
  97 MODULE_PARM_DESC(psv, "Disable or override all passive trip points.");
  98
  99 static int acpi_thermal_add(struct acpi_device *device);
 100 static int acpi_thermal_remove(struct acpi_device *device, int type);
 101 static int acpi_thermal_resume(struct acpi_device *device);
 102 static int acpi_thermal_state_open_fs(struct inode *inode, struct file *file);
 103 static int acpi_thermal_temp_open_fs(struct inode *inode, struct file *file);
 104 static int acpi_thermal_trip_open_fs(struct inode *inode, struct file *file);
 105 static int acpi_thermal_cooling_open_fs(struct inode *inode, struct file *file);
 106 static ssize_t acpi_thermal_write_cooling_mode(struct file *,
 107                                                const char __user *, size_t,
 108                                                loff_t *);
 109 static int acpi_thermal_polling_open_fs(struct inode *inode, struct file *file);
 110 static ssize_t acpi_thermal_write_polling(struct file *, const char __user *,
 111                                           size_t, loff_t *);
 112
 113 static const struct acpi_device_id  thermal_device_ids[] = {
 114         {ACPI_THERMAL_HID, 0},
 115         {"", 0},
 116 };
 117 MODULE_DEVICE_TABLE(acpi, thermal_device_ids);
 118
 119 static struct acpi_driver acpi_thermal_driver = {
 120         .name = "thermal",
 121         .class = ACPI_THERMAL_CLASS,
 122         .ids = thermal_device_ids,
 123         .ops = {
 124                 .add = acpi_thermal_add,
 125                 .remove = acpi_thermal_remove,
 126                 .resume = acpi_thermal_resume,
 127                 },
 128 };
 129
 130 struct acpi_thermal_state {
 131         u8 critical:1;
 132         u8 hot:1;
 133         u8 passive:1;
 134         u8 active:1;
 135         u8 reserved:4;
 136         int active_index;
 137 };
 138
 139 struct acpi_thermal_state_flags {
 140         u8 valid:1;
 141         u8 enabled:1;
 142         u8 reserved:6;
 143 };
 144
 145 struct acpi_thermal_critical {
 146         struct acpi_thermal_state_flags flags;
 147         unsigned long temperature;
 148 };
 149
 150 struct acpi_thermal_hot {
 151         struct acpi_thermal_state_flags flags;
 152         unsigned long temperature;
 153 };
 154
 155 struct acpi_thermal_passive {
 156         struct acpi_thermal_state_flags flags;
 157         unsigned long temperature;
 158         unsigned long tc1;
 159         unsigned long tc2;
 160         unsigned long tsp;
 161         struct acpi_handle_list devices;
 162 };
 163
 164 struct acpi_thermal_active {
 165         struct acpi_thermal_state_flags flags;
 166         unsigned long temperature;
 167         struct acpi_handle_list devices;
 168 };
 169
 170 struct acpi_thermal_trips {
 171         struct acpi_thermal_critical critical;
 172         struct acpi_thermal_hot hot;
 173         struct acpi_thermal_passive passive;
 174         struct acpi_thermal_active active[ACPI_THERMAL_MAX_ACTIVE];
 175 };
 176
 177 struct acpi_thermal_flags {
 178         u8 cooling_mode:1;      /* _SCP */
 179         u8 devices:1;           /* _TZD */
 180         u8 reserved:6;
 181 };
 182
 183 struct acpi_thermal {
 184         struct acpi_device * device;
 185         acpi_bus_id name;
 186         unsigned long temperature;
 187         unsigned long last_temperature;
 188         unsigned long polling_frequency;
 189         volatile u8 zombie;
 190         struct acpi_thermal_flags flags;
 191         struct acpi_thermal_state state;
 192         struct acpi_thermal_trips trips;
 193         struct acpi_handle_list devices;
 194         struct timer_list timer;
 195         struct thermal_zone_device *thermal_zone;
 196         int tz_enabled;
 197         struct mutex lock;
 198 };
 199
 200 static const struct file_operations acpi_thermal_state_fops = {
 201         .owner = THIS_MODULE,
 202         .open = acpi_thermal_state_open_fs,
 203         .read = seq_read,
 204         .llseek = seq_lseek,
 205         .release = single_release,
 206 };
 207
 208 static const struct file_operations acpi_thermal_temp_fops = {
 209         .owner = THIS_MODULE,
 210         .open = acpi_thermal_temp_open_fs,
 211         .read = seq_read,
 212         .llseek = seq_lseek,
 213         .release = single_release,
 214 };
 215
 216 static const struct file_operations acpi_thermal_trip_fops = {
 217         .owner = THIS_MODULE,
 218         .open = acpi_thermal_trip_open_fs,
 219         .read = seq_read,
 220         .llseek = seq_lseek,
 221         .release = single_release,
 222 };
 223
 224 static const struct file_operations acpi_thermal_cooling_fops = {
 225         .owner = THIS_MODULE,
 226         .open = acpi_thermal_cooling_open_fs,
 227         .read = seq_read,
 228         .write = acpi_thermal_write_cooling_mode,
 229         .llseek = seq_lseek,
 230         .release = single_release,
 231 };
 232
 233 static const struct file_operations acpi_thermal_polling_fops = {
 234         .owner = THIS_MODULE,
 235         .open = acpi_thermal_polling_open_fs,
 236         .read = seq_read,
 237         .write = acpi_thermal_write_polling,
 238         .llseek = seq_lseek,
 239         .release = single_release,
 240 };
 241
 242 /* --------------------------------------------------------------------------
 243                              Thermal Zone Management
 244    -------------------------------------------------------------------------- */
 245
 246 static int acpi_thermal_get_temperature(struct acpi_thermal *tz)
 247 {
 248         acpi_status status = AE_OK;
 249
 250
 251         if (!tz)
 252                 return -EINVAL;
 253
 254         tz->last_temperature = tz->temperature;
 255
 256         status =
 257             acpi_evaluate_integer(tz->device->handle, "_TMP", NULL, &tz->temperature);
 258         if (ACPI_FAILURE(status))
 259                 return -ENODEV;
 260
 261         ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Temperature is %lu dK\n",
 262                           tz->temperature));
 263
 264         return 0;
 265 }
 266
 267 static int acpi_thermal_get_polling_frequency(struct acpi_thermal *tz)
 268 {
 269         acpi_status status = AE_OK;
 270
 271
 272         if (!tz)
 273                 return -EINVAL;
 274
 275         status =
 276             acpi_evaluate_integer(tz->device->handle, "_TZP", NULL,
 277                                   &tz->polling_frequency);
 278         if (ACPI_FAILURE(status))
 279                 return -ENODEV;
 280
 281         ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Polling frequency is %lu dS\n",
 282                           tz->polling_frequency));
 283
 284         return 0;
 285 }
 286
 287 static int acpi_thermal_set_polling(struct acpi_thermal *tz, int seconds)
 288 {
 289
 290         if (!tz)
 291                 return -EINVAL;
 292
 293         tz->polling_frequency = seconds * 10;   /* Convert value to deci-seconds */
 294
 295         ACPI_DEBUG_PRINT((ACPI_DB_INFO,
 296                           "Polling frequency set to %lu seconds\n",
 297                           tz->polling_frequency/10));
 298
 299         return 0;
 300 }
 301
 302 static int acpi_thermal_set_cooling_mode(struct acpi_thermal *tz, int mode)
 303 {
 304         acpi_status status = AE_OK;
 305         union acpi_object arg0 = { ACPI_TYPE_INTEGER };
 306         struct acpi_object_list arg_list = { 1, &arg0 };
 307         acpi_handle handle = NULL;
 308
 309
 310         if (!tz)
 311                 return -EINVAL;
 312
 313         status = acpi_get_handle(tz->device->handle, "_SCP", &handle);
 314         if (ACPI_FAILURE(status)) {
 315                 ACPI_DEBUG_PRINT((ACPI_DB_INFO, "_SCP not present\n"));
 316                 return -ENODEV;
 317         }
 318
 319         arg0.integer.value = mode;
 320
 321         status = acpi_evaluate_object(handle, NULL, &arg_list, NULL);
 322         if (ACPI_FAILURE(status))
 323                 return -ENODEV;
 324
 325         return 0;
 326 }
 327
 328 #define ACPI_TRIPS_CRITICAL     0x01
 329 #define ACPI_TRIPS_HOT          0x02
 330 #define ACPI_TRIPS_PASSIVE      0x04
 331 #define ACPI_TRIPS_ACTIVE       0x08
 332 #define ACPI_TRIPS_DEVICES      0x10
 333
 334 #define ACPI_TRIPS_REFRESH_THRESHOLDS   (ACPI_TRIPS_PASSIVE | ACPI_TRIPS_ACTIVE)
 335 #define ACPI_TRIPS_REFRESH_DEVICES      ACPI_TRIPS_DEVICES
 336
 337 #define ACPI_TRIPS_INIT      (ACPI_TRIPS_CRITICAL | ACPI_TRIPS_HOT |    \
 338                               ACPI_TRIPS_PASSIVE | ACPI_TRIPS_ACTIVE |  \
 339                               ACPI_TRIPS_DEVICES)
 340
 341 /*
 342  * This exception is thrown out in two cases:
 343  * 1.An invalid trip point becomes invalid or a valid trip point becomes invalid
 344  *   when re-evaluating the AML code.
 345  * 2.TODO: Devices listed in _PSL, _ALx, _TZD may change.
 346  *   We need to re-bind the cooling devices of a thermal zone when this occurs.
 347  */
 348 #define ACPI_THERMAL_TRIPS_EXCEPTION(flags, str)        \
 349 do {    \
 350         if (flags != ACPI_TRIPS_INIT)   \
 351                 ACPI_EXCEPTION((AE_INFO, AE_ERROR,      \
 352                 "ACPI thermal trip point %s changed\n"  \
 353                 "Please send acpidump to linux-acpi@vger.kernel.org\n", str)); \
 354 } while (0)
 355
 356 static int acpi_thermal_trips_update(struct acpi_thermal *tz, int flag)
 357 {
 358         acpi_status status = AE_OK;
 359         struct acpi_handle_list devices;
 360         int valid = 0;
 361         int i;
 362
 363         /* Critical Shutdown (required) */
 364         if (flag & ACPI_TRIPS_CRITICAL) {
 365                 status = acpi_evaluate_integer(tz->device->handle,
 366                                 "_CRT", NULL, &tz->trips.critical.temperature);
 367                 if (ACPI_FAILURE(status)) {
 368                         tz->trips.critical.flags.valid = 0;
 369                         ACPI_EXCEPTION((AE_INFO, status,
 370                                         "No critical threshold"));
 371                         return -ENODEV;
 372                 } else {
 373                         tz->trips.critical.flags.valid = 1;
 374                         ACPI_DEBUG_PRINT((ACPI_DB_INFO,
 375                                         "Found critical threshold [%lu]\n",
 376                                         tz->trips.critical.temperature));
 377                 }
 378                 if (tz->trips.critical.flags.valid == 1) {
 379                         if (crt == -1) {
 380                                 tz->trips.critical.flags.valid = 0;
 381                         } else if (crt > 0) {
 382                                 unsigned long crt_k = CELSIUS_TO_KELVIN(crt);
 383                                 /*
 384                                  * Allow override to lower critical threshold
 385                                  */
 386                                 if (crt_k < tz->trips.critical.temperature)
 387                                         tz->trips.critical.temperature = crt_k;
 388                         }
 389                 }
 390         }
 391
 392         /* Critical Sleep (optional) */
 393         if (flag & ACPI_TRIPS_HOT) {
 394                 status = acpi_evaluate_integer(tz->device->handle,
 395                                 "_HOT", NULL, &tz->trips.hot.temperature);
 396                 if (ACPI_FAILURE(status)) {
 397                         tz->trips.hot.flags.valid = 0;
 398                         ACPI_DEBUG_PRINT((ACPI_DB_INFO,
 399                                         "No hot threshold\n"));
 400                 } else {
 401                         tz->trips.hot.flags.valid = 1;
 402                         ACPI_DEBUG_PRINT((ACPI_DB_INFO,
 403                                         "Found hot threshold [%lu]\n",
 404                                         tz->trips.critical.temperature));
 405                 }
 406         }
 407
 408         /* Passive (optional) */
 409         if (flag & ACPI_TRIPS_PASSIVE) {
 410                 valid = tz->trips.passive.flags.valid;
 411                 if (psv == -1) {
 412                         status = AE_SUPPORT;
 413                 } else if (psv > 0) {
 414                         tz->trips.passive.temperature = CELSIUS_TO_KELVIN(psv);
 415                         status = AE_OK;
 416                 } else {
 417                         status = acpi_evaluate_integer(tz->device->handle,
 418                                 "_PSV", NULL, &tz->trips.passive.temperature);
 419                 }
 420
 421                 if (ACPI_FAILURE(status))
 422                         tz->trips.passive.flags.valid = 0;
 423                 else {
 424                         tz->trips.passive.flags.valid = 1;
 425                         if (flag == ACPI_TRIPS_INIT) {
 426                                 status = acpi_evaluate_integer(
 427                                                 tz->device->handle, "_TC1",
 428                                                 NULL, &tz->trips.passive.tc1);
 429                                 if (ACPI_FAILURE(status))
 430                                         tz->trips.passive.flags.valid = 0;
 431                                 status = acpi_evaluate_integer(
 432                                                 tz->device->handle, "_TC2",
 433                                                 NULL, &tz->trips.passive.tc2);
 434                                 if (ACPI_FAILURE(status))
 435                                         tz->trips.passive.flags.valid = 0;
 436                                 status = acpi_evaluate_integer(
 437                                                 tz->device->handle, "_TSP",
 438                                                 NULL, &tz->trips.passive.tsp);
 439                                 if (ACPI_FAILURE(status))
 440                                         tz->trips.passive.flags.valid = 0;
 441                         }
 442                 }
 443         }
 444         if ((flag & ACPI_TRIPS_DEVICES) && tz->trips.passive.flags.valid) {
 445                 memset(&devices, 0, sizeof(struct acpi_handle_list));
 446                 status = acpi_evaluate_reference(tz->device->handle, "_PSL",
 447                                                         NULL, &devices);
 448                 if (ACPI_FAILURE(status))
 449                         tz->trips.passive.flags.valid = 0;
 450                 else
 451                         tz->trips.passive.flags.valid = 1;
 452
 453                 if (memcmp(&tz->trips.passive.devices, &devices,
 454                                 sizeof(struct acpi_handle_list))) {
 455                         memcpy(&tz->trips.passive.devices, &devices,
 456                                 sizeof(struct acpi_handle_list));
 457                         ACPI_THERMAL_TRIPS_EXCEPTION(flag, "device");
 458                 }
 459         }
 460         if ((flag & ACPI_TRIPS_PASSIVE) || (flag & ACPI_TRIPS_DEVICES)) {
 461                 if (valid != tz->trips.passive.flags.valid)
 462                                 ACPI_THERMAL_TRIPS_EXCEPTION(flag, "state");
 463         }
 464
 465         /* Active (optional) */
 466         for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++) {
 467                 char name[5] = { '_', 'A', 'C', ('0' + i), '\0' };
 468                 valid = tz->trips.active[i].flags.valid;
 469
 470                 if (act == -1)
 471                         break; /* disable all active trip points */
 472
 473                 if (flag & ACPI_TRIPS_ACTIVE) {
 474                         status = acpi_evaluate_integer(tz->device->handle,
 475                                 name, NULL, &tz->trips.active[i].temperature);
 476                         if (ACPI_FAILURE(status)) {
 477                                 tz->trips.active[i].flags.valid = 0;
 478                                 if (i == 0)
 479                                         break;
 480                                 if (act <= 0)
 481                                         break;
 482                                 if (i == 1)
 483                                         tz->trips.active[0].temperature =
 484                                                 CELSIUS_TO_KELVIN(act);
 485                                 else
 486                                         /*
 487                                          * Don't allow override higher than
 488                                          * the next higher trip point
 489                                          */
 490                                         tz->trips.active[i - 1].temperature =
 491                                                 (tz->trips.active[i - 2].temperature <
 492                                                 CELSIUS_TO_KELVIN(act) ?
 493                                                 tz->trips.active[i - 2].temperature :
 494                                                 CELSIUS_TO_KELVIN(act));
 495                                 break;
 496                         } else
 497                                 tz->trips.active[i].flags.valid = 1;
 498                 }
 499
 500                 name[2] = 'L';
 501                 if ((flag & ACPI_TRIPS_DEVICES) && tz->trips.active[i].flags.valid ) {
 502                         memset(&devices, 0, sizeof(struct acpi_handle_list));
 503                         status = acpi_evaluate_reference(tz->device->handle,
 504                                                 name, NULL, &devices);
 505                         if (ACPI_FAILURE(status))
 506                                 tz->trips.active[i].flags.valid = 0;
 507                         else
 508                                 tz->trips.active[i].flags.valid = 1;
 509
 510                         if (memcmp(&tz->trips.active[i].devices, &devices,
 511                                         sizeof(struct acpi_handle_list))) {
 512                                 memcpy(&tz->trips.active[i].devices, &devices,
 513                                         sizeof(struct acpi_handle_list));
 514                                 ACPI_THERMAL_TRIPS_EXCEPTION(flag, "device");
 515                         }
 516                 }
 517                 if ((flag & ACPI_TRIPS_ACTIVE) || (flag & ACPI_TRIPS_DEVICES))
 518                         if (valid != tz->trips.active[i].flags.valid)
 519                                 ACPI_THERMAL_TRIPS_EXCEPTION(flag, "state");
 520
 521                 if (!tz->trips.active[i].flags.valid)
 522                         break;
 523         }
 524
 525         if (flag & ACPI_TRIPS_DEVICES) {
 526                 memset(&devices, 0, sizeof(struct acpi_handle_list));
 527                 status = acpi_evaluate_reference(tz->device->handle, "_TZD",
 528                                                 NULL, &devices);
 529                 if (memcmp(&tz->devices, &devices,
 530                                 sizeof(struct acpi_handle_list))) {
 531                         memcpy(&tz->devices, &devices,
 532                                 sizeof(struct acpi_handle_list));
 533                         ACPI_THERMAL_TRIPS_EXCEPTION(flag, "device");
 534                 }
 535         }
 536
 537         return 0;
 538 }
 539
 540 static int acpi_thermal_get_trip_points(struct acpi_thermal *tz)
 541 {
 542         return acpi_thermal_trips_update(tz, ACPI_TRIPS_INIT);
 543 }
 544
 545 static int acpi_thermal_critical(struct acpi_thermal *tz)
 546 {
 547         if (!tz || !tz->trips.critical.flags.valid)
 548                 return -EINVAL;
 549
 550         if (tz->temperature >= tz->trips.critical.temperature) {
 551                 printk(KERN_WARNING PREFIX "Critical trip point\n");
 552                 tz->trips.critical.flags.enabled = 1;
 553         } else if (tz->trips.critical.flags.enabled)
 554                 tz->trips.critical.flags.enabled = 0;
 555
 556         acpi_bus_generate_proc_event(tz->device, ACPI_THERMAL_NOTIFY_CRITICAL,
 557                                 tz->trips.critical.flags.enabled);
 558         acpi_bus_generate_netlink_event(tz->device->pnp.device_class,
 559                                           tz->device->dev.bus_id,
 560                                           ACPI_THERMAL_NOTIFY_CRITICAL,
 561                                           tz->trips.critical.flags.enabled);
 562
 563         /* take no action if nocrt is set */
 564         if(!nocrt) {
 565                 printk(KERN_EMERG
 566                         "Critical temperature reached (%ld C), shutting down.\n",
 567                         KELVIN_TO_CELSIUS(tz->temperature));
 568                 orderly_poweroff(true);
 569         }
 570
 571         return 0;
 572 }
 573
 574 static int acpi_thermal_hot(struct acpi_thermal *tz)
 575 {
 576         if (!tz || !tz->trips.hot.flags.valid)
 577                 return -EINVAL;
 578
 579         if (tz->temperature >= tz->trips.hot.temperature) {
 580                 printk(KERN_WARNING PREFIX "Hot trip point\n");
 581                 tz->trips.hot.flags.enabled = 1;
 582         } else if (tz->trips.hot.flags.enabled)
 583                 tz->trips.hot.flags.enabled = 0;
 584
 585         acpi_bus_generate_proc_event(tz->device, ACPI_THERMAL_NOTIFY_HOT,
 586                                 tz->trips.hot.flags.enabled);
 587         acpi_bus_generate_netlink_event(tz->device->pnp.device_class,
 588                                           tz->device->dev.bus_id,
 589                                           ACPI_THERMAL_NOTIFY_HOT,
 590                                           tz->trips.hot.flags.enabled);
 591
 592         /* TBD: Call user-mode "sleep(S4)" function if nocrt is cleared */
 593
 594         return 0;
 595 }
 596
 597 static void acpi_thermal_passive(struct acpi_thermal *tz)
 598 {
 599         int result = 1;
 600         struct acpi_thermal_passive *passive = NULL;
 601         int trend = 0;
 602         int i = 0;
 603
 604
 605         if (!tz || !tz->trips.passive.flags.valid)
 606                 return;
 607
 608         passive = &(tz->trips.passive);
 609
 610         /*
 611          * Above Trip?
 612          * -----------
 613          * Calculate the thermal trend (using the passive cooling equation)
 614          * and modify the performance limit for all passive cooling devices
 615          * accordingly.  Note that we assume symmetry.
 616          */
 617         if (tz->temperature >= passive->temperature) {
 618                 trend =
 619                     (passive->tc1 * (tz->temperature - tz->last_temperature)) +
 620                     (passive->tc2 * (tz->temperature - passive->temperature));
 621                 ACPI_DEBUG_PRINT((ACPI_DB_INFO,
 622                                   "trend[%d]=(tc1[%lu]*(tmp[%lu]-last[%lu]))+(tc2[%lu]*(tmp[%lu]-psv[%lu]))\n",
 623                                   trend, passive->tc1, tz->temperature,
 624                                   tz->last_temperature, passive->tc2,
 625                                   tz->temperature, passive->temperature));
 626                 passive->flags.enabled = 1;
 627                 /* Heating up? */
 628                 if (trend > 0)
 629                         for (i = 0; i < passive->devices.count; i++)
 630                                 acpi_processor_set_thermal_limit(passive->
 631                                                                  devices.
 632                                                                  handles[i],
 633                                                                  ACPI_PROCESSOR_LIMIT_INCREMENT);
 634                 /* Cooling off? */
 635                 else if (trend < 0) {
 636                         for (i = 0; i < passive->devices.count; i++)
 637                                 /*
 638                                  * assume that we are on highest
 639                                  * freq/lowest thrott and can leave
 640                                  * passive mode, even in error case
 641                                  */
 642                                 if (!acpi_processor_set_thermal_limit
 643                                     (passive->devices.handles[i],
 644                                      ACPI_PROCESSOR_LIMIT_DECREMENT))
 645                                         result = 0;
 646                         /*
 647                          * Leave cooling mode, even if the temp might
 648                          * higher than trip point This is because some
 649                          * machines might have long thermal polling
 650                          * frequencies (tsp) defined. We will fall back
 651                          * into passive mode in next cycle (probably quicker)
 652                          */
 653                         if (result) {
 654                                 passive->flags.enabled = 0;
 655                                 ACPI_DEBUG_PRINT((ACPI_DB_INFO,
 656                                                   "Disabling passive cooling, still above threshold,"
 657                                                   " but we are cooling down\n"));
 658                         }
 659                 }
 660                 return;
 661         }
 662
 663         /*
 664          * Below Trip?
 665          * -----------
 666          * Implement passive cooling hysteresis to slowly increase performance
 667          * and avoid thrashing around the passive trip point.  Note that we
 668          * assume symmetry.
 669          */
 670         if (!passive->flags.enabled)
 671                 return;
 672         for (i = 0; i < passive->devices.count; i++)
 673                 if (!acpi_processor_set_thermal_limit
 674                     (passive->devices.handles[i],
 675                      ACPI_PROCESSOR_LIMIT_DECREMENT))
 676                         result = 0;
 677         if (result) {
 678                 passive->flags.enabled = 0;
 679                 ACPI_DEBUG_PRINT((ACPI_DB_INFO,
 680                                   "Disabling passive cooling (zone is cool)\n"));
 681         }
 682 }
 683
 684 static void acpi_thermal_active(struct acpi_thermal *tz)
 685 {
 686         int result = 0;
 687         struct acpi_thermal_active *active = NULL;
 688         int i = 0;
 689         int j = 0;
 690         unsigned long maxtemp = 0;
 691
 692
 693         if (!tz)
 694                 return;
 695
 696         for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++) {
 697                 active = &(tz->trips.active[i]);
 698                 if (!active || !active->flags.valid)
 699                         break;
 700                 if (tz->temperature >= active->temperature) {
 701                         /*
 702                          * Above Threshold?
 703                          * ----------------
 704                          * If not already enabled, turn ON all cooling devices
 705                          * associated with this active threshold.
 706                          */
 707                         if (active->temperature > maxtemp)
 708                                 tz->state.active_index = i;
 709                         maxtemp = active->temperature;
 710                         if (active->flags.enabled)
 711                                 continue;
 712                         for (j = 0; j < active->devices.count; j++) {
 713                                 result =
 714                                     acpi_bus_set_power(active->devices.
 715                                                        handles[j],
 716                                                        ACPI_STATE_D0);
 717                                 if (result) {
 718                                         printk(KERN_WARNING PREFIX
 719                                                       "Unable to turn cooling device [%p] 'on'\n",
 720                                                       active->devices.
 721                                                       handles[j]);
 722                                         continue;
 723                                 }
 724                                 active->flags.enabled = 1;
 725                                 ACPI_DEBUG_PRINT((ACPI_DB_INFO,
 726                                                   "Cooling device [%p] now 'on'\n",
 727                                                   active->devices.handles[j]));
 728                         }
 729                         continue;
 730                 }
 731                 if (!active->flags.enabled)
 732                         continue;
 733                 /*
 734                  * Below Threshold?
 735                  * ----------------
 736                  * Turn OFF all cooling devices associated with this
 737                  * threshold.
 738                  */
 739                 for (j = 0; j < active->devices.count; j++) {
 740                         result = acpi_bus_set_power(active->devices.handles[j],
 741                                                     ACPI_STATE_D3);
 742                         if (result) {
 743                                 printk(KERN_WARNING PREFIX
 744                                               "Unable to turn cooling device [%p] 'off'\n",
 745                                               active->devices.handles[j]);
 746                                 continue;
 747                         }
 748                         active->flags.enabled = 0;
 749                         ACPI_DEBUG_PRINT((ACPI_DB_INFO,
 750                                           "Cooling device [%p] now 'off'\n",
 751                                           active->devices.handles[j]));
 752                 }
 753         }
 754 }
 755
 756 static void acpi_thermal_check(void *context);
 757
 758 static void acpi_thermal_run(unsigned long data)
 759 {
 760         struct acpi_thermal *tz = (struct acpi_thermal *)data;
 761         if (!tz->zombie)
 762                 acpi_os_execute(OSL_GPE_HANDLER, acpi_thermal_check, (void *)data);
 763 }
 764
 765 static void acpi_thermal_check(void *data)
 766 {
 767         int result = 0;
 768         struct acpi_thermal *tz = data;
 769         unsigned long sleep_time = 0;
 770         unsigned long timeout_jiffies = 0;
 771         int i = 0;
 772         struct acpi_thermal_state state;
 773
 774
 775         if (!tz) {
 776                 printk(KERN_ERR PREFIX "Invalid (NULL) context\n");
 777                 return;
 778         }
 779
 780         /* Check if someone else is already running */
 781         if (!mutex_trylock(&tz->lock))
 782                 return;
 783
 784         state = tz->state;
 785
 786         result = acpi_thermal_get_temperature(tz);
 787         if (result)
 788                 goto unlock;
 789
 790         if (!tz->tz_enabled)
 791                 goto unlock;
 792
 793         memset(&tz->state, 0, sizeof(tz->state));
 794
 795         /*
 796          * Check Trip Points
 797          * -----------------
 798          * Compare the current temperature to the trip point values to see
 799          * if we've entered one of the thermal policy states.  Note that
 800          * this function determines when a state is entered, but the
 801          * individual policy decides when it is exited (e.g. hysteresis).
 802          */
 803         if (tz->trips.critical.flags.valid)
 804                 state.critical |=
 805                     (tz->temperature >= tz->trips.critical.temperature);
 806         if (tz->trips.hot.flags.valid)
 807                 state.hot |= (tz->temperature >= tz->trips.hot.temperature);
 808         if (tz->trips.passive.flags.valid)
 809                 state.passive |=
 810                     (tz->temperature >= tz->trips.passive.temperature);
 811         for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++)
 812                 if (tz->trips.active[i].flags.valid)
 813                         state.active |=
 814                             (tz->temperature >=
 815                              tz->trips.active[i].temperature);
 816
 817         /*
 818          * Invoke Policy
 819          * -------------
 820          * Separated from the above check to allow individual policy to
 821          * determine when to exit a given state.
 822          */
 823         if (state.critical)
 824                 acpi_thermal_critical(tz);
 825         if (state.hot)
 826                 acpi_thermal_hot(tz);
 827         if (state.passive)
 828                 acpi_thermal_passive(tz);
 829         if (state.active)
 830                 acpi_thermal_active(tz);
 831
 832         /*
 833          * Calculate State
 834          * ---------------
 835          * Again, separated from the above two to allow independent policy
 836          * decisions.
 837          */
 838         tz->state.critical = tz->trips.critical.flags.enabled;
 839         tz->state.hot = tz->trips.hot.flags.enabled;
 840         tz->state.passive = tz->trips.passive.flags.enabled;
 841         tz->state.active = 0;
 842         for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++)
 843                 tz->state.active |= tz->trips.active[i].flags.enabled;
 844
 845         /*
 846          * Calculate Sleep Time
 847          * --------------------
 848          * If we're in the passive state, use _TSP's value.  Otherwise
 849          * use the default polling frequency (e.g. _TZP).  If no polling
 850          * frequency is specified then we'll wait forever (at least until
 851          * a thermal event occurs).  Note that _TSP and _TZD values are
 852          * given in 1/10th seconds (we must covert to milliseconds).
 853          */
 854         if (tz->state.passive) {
 855                 sleep_time = tz->trips.passive.tsp * 100;
 856                 timeout_jiffies =  jiffies + (HZ * sleep_time) / 1000;
 857         } else if (tz->polling_frequency > 0) {
 858                 sleep_time = tz->polling_frequency * 100;
 859                 timeout_jiffies =  round_jiffies(jiffies + (HZ * sleep_time) / 1000);
 860         }
 861
 862         ACPI_DEBUG_PRINT((ACPI_DB_INFO, "%s: temperature[%lu] sleep[%lu]\n",
 863                           tz->name, tz->temperature, sleep_time));
 864
 865         /*
 866          * Schedule Next Poll
 867          * ------------------
 868          */
 869         if (!sleep_time) {
 870                 if (timer_pending(&(tz->timer)))
 871                         del_timer(&(tz->timer));
 872         } else {
 873                 if (timer_pending(&(tz->timer)))
 874                         mod_timer(&(tz->timer), timeout_jiffies);
 875                 else {
 876                         tz->timer.data = (unsigned long)tz;
 877                         tz->timer.function = acpi_thermal_run;
 878                         tz->timer.expires = timeout_jiffies;
 879                         add_timer(&(tz->timer));
 880                 }
 881         }
 882       unlock:
 883         mutex_unlock(&tz->lock);
 884 }
 885
 886 /* sys I/F for generic thermal sysfs support */
 887 #define KELVIN_TO_MILLICELSIUS(t) (t * 100 - 273200)
 888
 889 static int thermal_get_temp(struct thermal_zone_device *thermal, char *buf)
 890 {
 891         struct acpi_thermal *tz = thermal->devdata;
 892         int result;
 893
 894         if (!tz)
 895                 return -EINVAL;
 896
 897         result = acpi_thermal_get_temperature(tz);
 898         if (result)
 899                 return result;
 900
 901         return sprintf(buf, "%ld\n", KELVIN_TO_MILLICELSIUS(tz->temperature));
 902 }
 903
 904 static const char enabled[] = "kernel";
 905 static const char disabled[] = "user";
 906 static int thermal_get_mode(struct thermal_zone_device *thermal,
 907                                 char *buf)
 908 {
 909         struct acpi_thermal *tz = thermal->devdata;
 910
 911         if (!tz)
 912                 return -EINVAL;
 913
 914         return sprintf(buf, "%s\n", tz->tz_enabled ?
 915                         enabled : disabled);
 916 }
 917
 918 static int thermal_set_mode(struct thermal_zone_device *thermal,
 919                                 const char *buf)
 920 {
 921         struct acpi_thermal *tz = thermal->devdata;
 922         int enable;
 923
 924         if (!tz)
 925                 return -EINVAL;
 926
 927         /*
 928          * enable/disable thermal management from ACPI thermal driver
 929          */
 930         if (!strncmp(buf, enabled, sizeof enabled - 1))
 931                 enable = 1;
 932         else if (!strncmp(buf, disabled, sizeof disabled - 1))
 933                 enable = 0;
 934         else
 935                 return -EINVAL;
 936
 937         if (enable != tz->tz_enabled) {
 938                 tz->tz_enabled = enable;
 939                 ACPI_DEBUG_PRINT((ACPI_DB_INFO,
 940                         "%s ACPI thermal control\n",
 941                         tz->tz_enabled ? enabled : disabled));
 942                 acpi_thermal_check(tz);
 943         }
 944         return 0;
 945 }
 946
 947 static int thermal_get_trip_type(struct thermal_zone_device *thermal,
 948                                  int trip, char *buf)
 949 {
 950         struct acpi_thermal *tz = thermal->devdata;
 951         int i;
 952
 953         if (!tz || trip < 0)
 954                 return -EINVAL;
 955
 956         if (tz->trips.critical.flags.valid) {
 957                 if (!trip)
 958                         return sprintf(buf, "critical\n");
 959                 trip--;
 960         }
 961
 962         if (tz->trips.hot.flags.valid) {
 963                 if (!trip)
 964                         return sprintf(buf, "hot\n");
 965                 trip--;
 966         }
 967
 968         if (tz->trips.passive.flags.valid) {
 969                 if (!trip)
 970                         return sprintf(buf, "passive\n");
 971                 trip--;
 972         }
 973
 974         for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE &&
 975                 tz->trips.active[i].flags.valid; i++) {
 976                 if (!trip)
 977                         return sprintf(buf, "active%d\n", i);
 978                 trip--;
 979         }
 980
 981         return -EINVAL;
 982 }
 983
 984 static int thermal_get_trip_temp(struct thermal_zone_device *thermal,
 985                                  int trip, char *buf)
 986 {
 987         struct acpi_thermal *tz = thermal->devdata;
 988         int i;
 989
 990         if (!tz || trip < 0)
 991                 return -EINVAL;
 992
 993         if (tz->trips.critical.flags.valid) {
 994                 if (!trip)
 995                         return sprintf(buf, "%ld\n", KELVIN_TO_MILLICELSIUS(
 996                                 tz->trips.critical.temperature));
 997                 trip--;
 998         }
 999
1000         if (tz->trips.hot.flags.valid) {
1001                 if (!trip)
1002                         return sprintf(buf, "%ld\n", KELVIN_TO_MILLICELSIUS(
1003                                         tz->trips.hot.temperature));
1004                 trip--;
1005         }
1006
1007         if (tz->trips.passive.flags.valid) {
1008                 if (!trip)
1009                         return sprintf(buf, "%ld\n", KELVIN_TO_MILLICELSIUS(
1010                                         tz->trips.passive.temperature));
1011                 trip--;
1012         }
1013
1014         for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE &&
1015                 tz->trips.active[i].flags.valid; i++) {
1016                 if (!trip)
1017                         return sprintf(buf, "%ld\n", KELVIN_TO_MILLICELSIUS(
1018                                         tz->trips.active[i].temperature));
1019                 trip--;
1020         }
1021
1022         return -EINVAL;
1023 }
1024
1025 static int thermal_get_crit_temp(struct thermal_zone_device *thermal,
1026                                 unsigned long *temperature) {
1027         struct acpi_thermal *tz = thermal->devdata;
1028
1029         if (tz->trips.critical.flags.valid) {
1030                 *temperature = KELVIN_TO_MILLICELSIUS(
1031                                 tz->trips.critical.temperature);
1032                 return 0;
1033         } else
1034                 return -EINVAL;
1035 }
1036
1037 typedef int (*cb)(struct thermal_zone_device *, int,
1038                   struct thermal_cooling_device *);
1039 static int acpi_thermal_cooling_device_cb(struct thermal_zone_device *thermal,
1040                                         struct thermal_cooling_device *cdev,
1041                                         cb action)
1042 {
1043         struct acpi_device *device = cdev->devdata;
1044         struct acpi_thermal *tz = thermal->devdata;
1045         struct acpi_device *dev;
1046         acpi_status status;
1047         acpi_handle handle;
1048         int i;
1049         int j;
1050         int trip = -1;
1051         int result = 0;
1052
1053         if (tz->trips.critical.flags.valid)
1054                 trip++;
1055
1056         if (tz->trips.hot.flags.valid)
1057                 trip++;
1058
1059         if (tz->trips.passive.flags.valid) {
1060                 trip++;
1061                 for (i = 0; i < tz->trips.passive.devices.count;
1062                     i++) {
1063                         handle = tz->trips.passive.devices.handles[i];
1064                         status = acpi_bus_get_device(handle, &dev);
1065                         if (ACPI_SUCCESS(status) && (dev == device)) {
1066                                 result = action(thermal, trip, cdev);
1067                                 if (result)
1068                                         goto failed;
1069                         }
1070                 }
1071         }
1072
1073         for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++) {
1074                 if (!tz->trips.active[i].flags.valid)
1075                         break;
1076                 trip++;
1077                 for (j = 0;
1078                     j < tz->trips.active[i].devices.count;
1079                     j++) {
1080                         handle = tz->trips.active[i].devices.handles[j];
1081                         status = acpi_bus_get_device(handle, &dev);
1082                         if (ACPI_SUCCESS(status) && (dev == device)) {
1083                                 result = action(thermal, trip, cdev);
1084                                 if (result)
1085                                         goto failed;
1086                         }
1087                 }
1088         }
1089
1090         for (i = 0; i < tz->devices.count; i++) {
1091                 handle = tz->devices.handles[i];
1092                 status = acpi_bus_get_device(handle, &dev);
1093                 if (ACPI_SUCCESS(status) && (dev == device)) {
1094                         result = action(thermal, -1, cdev);
1095                         if (result)
1096                                 goto failed;
1097                 }
1098         }
1099
1100 failed:
1101         return result;
1102 }
1103
1104 static int
1105 acpi_thermal_bind_cooling_device(struct thermal_zone_device *thermal,
1106                                         struct thermal_cooling_device *cdev)
1107 {
1108         return acpi_thermal_cooling_device_cb(thermal, cdev,
1109                                 thermal_zone_bind_cooling_device);
1110 }
1111
1112 static int
1113 acpi_thermal_unbind_cooling_device(struct thermal_zone_device *thermal,
1114                                         struct thermal_cooling_device *cdev)
1115 {
1116         return acpi_thermal_cooling_device_cb(thermal, cdev,
1117                                 thermal_zone_unbind_cooling_device);
1118 }
1119
1120 static struct thermal_zone_device_ops acpi_thermal_zone_ops = {
1121         .bind = acpi_thermal_bind_cooling_device,
1122         .unbind = acpi_thermal_unbind_cooling_device,
1123         .get_temp = thermal_get_temp,
1124         .get_mode = thermal_get_mode,
1125         .set_mode = thermal_set_mode,
1126         .get_trip_type = thermal_get_trip_type,
1127         .get_trip_temp = thermal_get_trip_temp,
1128         .get_crit_temp = thermal_get_crit_temp,
1129 };
1130
1131 static int acpi_thermal_register_thermal_zone(struct acpi_thermal *tz)
1132 {
1133         int trips = 0;
1134         int result;
1135         acpi_status status;
1136         int i;
1137
1138         if (tz->trips.critical.flags.valid)
1139                 trips++;
1140
1141         if (tz->trips.hot.flags.valid)
1142                 trips++;
1143
1144         if (tz->trips.passive.flags.valid)
1145                 trips++;
1146
1147         for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE &&
1148                         tz->trips.active[i].flags.valid; i++, trips++);
1149         tz->thermal_zone = thermal_zone_device_register("acpitz",
1150                                         trips, tz, &acpi_thermal_zone_ops);
1151         if (IS_ERR(tz->thermal_zone))
1152                 return -ENODEV;
1153
1154         result = sysfs_create_link(&tz->device->dev.kobj,
1155                                    &tz->thermal_zone->device.kobj, "thermal_zone");
1156         if (result)
1157                 return result;
1158
1159         result = sysfs_create_link(&tz->thermal_zone->device.kobj,
1160                                    &tz->device->dev.kobj, "device");
1161         if (result)
1162                 return result;
1163
1164         status = acpi_attach_data(tz->device->handle,
1165                                   acpi_bus_private_data_handler,
1166                                   tz->thermal_zone);
1167         if (ACPI_FAILURE(status)) {
1168                 ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
1169                                 "Error attaching device data\n"));
1170                 return -ENODEV;
1171         }
1172
1173         tz->tz_enabled = 1;
1174
1175         printk(KERN_INFO PREFIX "%s is registered as thermal_zone%d\n",
1176                         tz->device->dev.bus_id, tz->thermal_zone->id);
1177         return 0;
1178 }
1179
1180 static void acpi_thermal_unregister_thermal_zone(struct acpi_thermal *tz)
1181 {
1182         sysfs_remove_link(&tz->device->dev.kobj, "thermal_zone");
1183         sysfs_remove_link(&tz->thermal_zone->device.kobj, "device");
1184         thermal_zone_device_unregister(tz->thermal_zone);
1185         tz->thermal_zone = NULL;
1186         acpi_detach_data(tz->device->handle, acpi_bus_private_data_handler);
1187 }
1188
1189
1190 /* --------------------------------------------------------------------------
1191                               FS Interface (/proc)
1192    -------------------------------------------------------------------------- */
1193
1194 static struct proc_dir_entry *acpi_thermal_dir;
1195
1196 static int acpi_thermal_state_seq_show(struct seq_file *seq, void *offset)
1197 {
1198         struct acpi_thermal *tz = seq->private;
1199
1200
1201         if (!tz)
1202                 goto end;
1203
1204         seq_puts(seq, "state:                   ");
1205
1206         if (!tz->state.critical && !tz->state.hot && !tz->state.passive
1207             && !tz->state.active)
1208                 seq_puts(seq, "ok\n");
1209         else {
1210                 if (tz->state.critical)
1211                         seq_puts(seq, "critical ");
1212                 if (tz->state.hot)
1213                         seq_puts(seq, "hot ");
1214                 if (tz->state.passive)
1215                         seq_puts(seq, "passive ");
1216                 if (tz->state.active)
1217                         seq_printf(seq, "active[%d]", tz->state.active_index);
1218                 seq_puts(seq, "\n");
1219         }
1220
1221       end:
1222         return 0;
1223 }
1224
1225 static int acpi_thermal_state_open_fs(struct inode *inode, struct file *file)
1226 {
1227         return single_open(file, acpi_thermal_state_seq_show, PDE(inode)->data);
1228 }
1229
1230 static int acpi_thermal_temp_seq_show(struct seq_file *seq, void *offset)
1231 {
1232         int result = 0;
1233         struct acpi_thermal *tz = seq->private;
1234
1235
1236         if (!tz)
1237                 goto end;
1238
1239         result = acpi_thermal_get_temperature(tz);
1240         if (result)
1241                 goto end;
1242
1243         seq_printf(seq, "temperature:             %ld C\n",
1244                    KELVIN_TO_CELSIUS(tz->temperature));
1245
1246       end:
1247         return 0;
1248 }
1249
1250 static int acpi_thermal_temp_open_fs(struct inode *inode, struct file *file)
1251 {
1252         return single_open(file, acpi_thermal_temp_seq_show, PDE(inode)->data);
1253 }
1254
1255 static int acpi_thermal_trip_seq_show(struct seq_file *seq, void *offset)
1256 {
1257         struct acpi_thermal *tz = seq->private;
1258         struct acpi_device *device;
1259         acpi_status status;
1260
1261         int i = 0;
1262         int j = 0;
1263
1264
1265         if (!tz)
1266                 goto end;
1267
1268         if (tz->trips.critical.flags.valid)
1269                 seq_printf(seq, "critical (S5):           %ld C%s",
1270                            KELVIN_TO_CELSIUS(tz->trips.critical.temperature),
1271                            nocrt ? " <disabled>\n" : "\n");
1272
1273         if (tz->trips.hot.flags.valid)
1274                 seq_printf(seq, "hot (S4):                %ld C%s",
1275                            KELVIN_TO_CELSIUS(tz->trips.hot.temperature),
1276                            nocrt ? " <disabled>\n" : "\n");
1277
1278         if (tz->trips.passive.flags.valid) {
1279                 seq_printf(seq,
1280                            "passive:                 %ld C: tc1=%lu tc2=%lu tsp=%lu devices=",
1281                            KELVIN_TO_CELSIUS(tz->trips.passive.temperature),
1282                            tz->trips.passive.tc1, tz->trips.passive.tc2,
1283                            tz->trips.passive.tsp);
1284                 for (j = 0; j < tz->trips.passive.devices.count; j++) {
1285                         status = acpi_bus_get_device(tz->trips.passive.devices.
1286                                                      handles[j], &device);
1287                         seq_printf(seq, "%4.4s ", status ? "" :
1288                                    acpi_device_bid(device));
1289                 }
1290                 seq_puts(seq, "\n");
1291         }
1292
1293         for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++) {
1294                 if (!(tz->trips.active[i].flags.valid))
1295                         break;
1296                 seq_printf(seq, "active[%d]:               %ld C: devices=",
1297                            i,
1298                            KELVIN_TO_CELSIUS(tz->trips.active[i].temperature));
1299                 for (j = 0; j < tz->trips.active[i].devices.count; j++){
1300                         status = acpi_bus_get_device(tz->trips.active[i].
1301                                                      devices.handles[j],
1302                                                      &device);
1303                         seq_printf(seq, "%4.4s ", status ? "" :
1304                                    acpi_device_bid(device));
1305                 }
1306                 seq_puts(seq, "\n");
1307         }
1308
1309       end:
1310         return 0;
1311 }
1312
1313 static int acpi_thermal_trip_open_fs(struct inode *inode, struct file *file)
1314 {
1315         return single_open(file, acpi_thermal_trip_seq_show, PDE(inode)->data);
1316 }
1317
1318 static int acpi_thermal_cooling_seq_show(struct seq_file *seq, void *offset)
1319 {
1320         struct acpi_thermal *tz = seq->private;
1321
1322
1323         if (!tz)
1324                 goto end;
1325
1326         if (!tz->flags.cooling_mode)
1327                 seq_puts(seq, "<setting not supported>\n");
1328         else
1329                 seq_puts(seq, "0 - Active; 1 - Passive\n");
1330
1331       end:
1332         return 0;
1333 }
1334
1335 static int acpi_thermal_cooling_open_fs(struct inode *inode, struct file *file)
1336 {
1337         return single_open(file, acpi_thermal_cooling_seq_show,
1338                            PDE(inode)->data);
1339 }
1340
1341 static ssize_t
1342 acpi_thermal_write_cooling_mode(struct file *file,
1343                                 const char __user * buffer,
1344                                 size_t count, loff_t * ppos)
1345 {
1346         struct seq_file *m = file->private_data;
1347         struct acpi_thermal *tz = m->private;
1348         int result = 0;
1349         char mode_string[12] = { '\0' };
1350
1351
1352         if (!tz || (count > sizeof(mode_string) - 1))
1353                 return -EINVAL;
1354
1355         if (!tz->flags.cooling_mode)
1356                 return -ENODEV;
1357
1358         if (copy_from_user(mode_string, buffer, count))
1359                 return -EFAULT;
1360
1361         mode_string[count] = '\0';
1362
1363         result = acpi_thermal_set_cooling_mode(tz,
1364                                                simple_strtoul(mode_string, NULL,
1365                                                               0));
1366         if (result)
1367                 return result;
1368
1369         acpi_thermal_check(tz);
1370
1371         return count;
1372 }
1373
1374 static int acpi_thermal_polling_seq_show(struct seq_file *seq, void *offset)
1375 {
1376         struct acpi_thermal *tz = seq->private;
1377
1378
1379         if (!tz)
1380                 goto end;
1381
1382         if (!tz->polling_frequency) {
1383                 seq_puts(seq, "<polling disabled>\n");
1384                 goto end;
1385         }
1386
1387         seq_printf(seq, "polling frequency:       %lu seconds\n",
1388                    (tz->polling_frequency / 10));
1389
1390       end:
1391         return 0;
1392 }
1393
1394 static int acpi_thermal_polling_open_fs(struct inode *inode, struct file *file)
1395 {
1396         return single_open(file, acpi_thermal_polling_seq_show,
1397                            PDE(inode)->data);
1398 }
1399
1400 static ssize_t
1401 acpi_thermal_write_polling(struct file *file,
1402                            const char __user * buffer,
1403                            size_t count, loff_t * ppos)
1404 {
1405         struct seq_file *m = file->private_data;
1406         struct acpi_thermal *tz = m->private;
1407         int result = 0;
1408         char polling_string[12] = { '\0' };
1409         int seconds = 0;
1410
1411
1412         if (!tz || (count > sizeof(polling_string) - 1))
1413                 return -EINVAL;
1414
1415         if (copy_from_user(polling_string, buffer, count))
1416                 return -EFAULT;
1417
1418         polling_string[count] = '\0';
1419
1420         seconds = simple_strtoul(polling_string, NULL, 0);
1421
1422         result = acpi_thermal_set_polling(tz, seconds);
1423         if (result)
1424                 return result;
1425
1426         acpi_thermal_check(tz);
1427
1428         return count;
1429 }
1430
1431 static int acpi_thermal_add_fs(struct acpi_device *device)
1432 {
1433         struct proc_dir_entry *entry = NULL;
1434
1435
1436         if (!acpi_device_dir(device)) {
1437                 acpi_device_dir(device) = proc_mkdir(acpi_device_bid(device),
1438                                                      acpi_thermal_dir);
1439                 if (!acpi_device_dir(device))
1440                         return -ENODEV;
1441                 acpi_device_dir(device)->owner = THIS_MODULE;
1442         }
1443
1444         /* 'state' [R] */
1445         entry = proc_create_data(ACPI_THERMAL_FILE_STATE,
1446                                  S_IRUGO, acpi_device_dir(device),
1447                                  &acpi_thermal_state_fops,
1448                                  acpi_driver_data(device));
1449         if (!entry)
1450                 return -ENODEV;
1451
1452         /* 'temperature' [R] */
1453         entry = proc_create_data(ACPI_THERMAL_FILE_TEMPERATURE,
1454                                  S_IRUGO, acpi_device_dir(device),
1455                                  &acpi_thermal_temp_fops,
1456                                  acpi_driver_data(device));
1457         if (!entry)
1458                 return -ENODEV;
1459
1460         /* 'trip_points' [R] */
1461         entry = proc_create_data(ACPI_THERMAL_FILE_TRIP_POINTS,
1462                                  S_IRUGO,
1463                                  acpi_device_dir(device),
1464                                  &acpi_thermal_trip_fops,
1465                                  acpi_driver_data(device));
1466         if (!entry)
1467                 return -ENODEV;
1468
1469         /* 'cooling_mode' [R/W] */
1470         entry = proc_create_data(ACPI_THERMAL_FILE_COOLING_MODE,
1471                                  S_IFREG | S_IRUGO | S_IWUSR,
1472                                  acpi_device_dir(device),
1473                                  &acpi_thermal_cooling_fops,
1474                                  acpi_driver_data(device));
1475         if (!entry)
1476                 return -ENODEV;
1477
1478         /* 'polling_frequency' [R/W] */
1479         entry = proc_create_data(ACPI_THERMAL_FILE_POLLING_FREQ,
1480                                  S_IFREG | S_IRUGO | S_IWUSR,
1481                                  acpi_device_dir(device),
1482                                  &acpi_thermal_polling_fops,
1483                                  acpi_driver_data(device));
1484         if (!entry)
1485                 return -ENODEV;
1486         return 0;
1487 }
1488
1489 static int acpi_thermal_remove_fs(struct acpi_device *device)
1490 {
1491
1492         if (acpi_device_dir(device)) {
1493                 remove_proc_entry(ACPI_THERMAL_FILE_POLLING_FREQ,
1494                                   acpi_device_dir(device));
1495                 remove_proc_entry(ACPI_THERMAL_FILE_COOLING_MODE,
1496                                   acpi_device_dir(device));
1497                 remove_proc_entry(ACPI_THERMAL_FILE_TRIP_POINTS,
1498                                   acpi_device_dir(device));
1499                 remove_proc_entry(ACPI_THERMAL_FILE_TEMPERATURE,
1500                                   acpi_device_dir(device));
1501                 remove_proc_entry(ACPI_THERMAL_FILE_STATE,
1502                                   acpi_device_dir(device));
1503                 remove_proc_entry(acpi_device_bid(device), acpi_thermal_dir);
1504                 acpi_device_dir(device) = NULL;
1505         }
1506
1507         return 0;
1508 }
1509
1510 /* --------------------------------------------------------------------------
1511                                  Driver Interface
1512    -------------------------------------------------------------------------- */
1513
1514 static void acpi_thermal_notify(acpi_handle handle, u32 event, void *data)
1515 {
1516         struct acpi_thermal *tz = data;
1517         struct acpi_device *device = NULL;
1518
1519
1520         if (!tz)
1521                 return;
1522
1523         device = tz->device;
1524
1525         switch (event) {
1526         case ACPI_THERMAL_NOTIFY_TEMPERATURE:
1527                 acpi_thermal_check(tz);
1528                 break;
1529         case ACPI_THERMAL_NOTIFY_THRESHOLDS:
1530                 acpi_thermal_trips_update(tz, ACPI_TRIPS_REFRESH_THRESHOLDS);
1531                 acpi_thermal_check(tz);
1532                 acpi_bus_generate_proc_event(device, event, 0);
1533                 acpi_bus_generate_netlink_event(device->pnp.device_class,
1534                                                   device->dev.bus_id, event, 0);
1535                 break;
1536         case ACPI_THERMAL_NOTIFY_DEVICES:
1537                 acpi_thermal_trips_update(tz, ACPI_TRIPS_REFRESH_DEVICES);
1538                 acpi_thermal_check(tz);
1539                 acpi_bus_generate_proc_event(device, event, 0);
1540                 acpi_bus_generate_netlink_event(device->pnp.device_class,
1541                                                   device->dev.bus_id, event, 0);
1542                 break;
1543         default:
1544                 ACPI_DEBUG_PRINT((ACPI_DB_INFO,
1545                                   "Unsupported event [0x%x]\n", event));
1546                 break;
1547         }
1548
1549         return;
1550 }
1551
1552 static int acpi_thermal_get_info(struct acpi_thermal *tz)
1553 {
1554         int result = 0;
1555
1556
1557         if (!tz)
1558                 return -EINVAL;
1559
1560         /* Get temperature [_TMP] (required) */
1561         result = acpi_thermal_get_temperature(tz);
1562         if (result)
1563                 return result;
1564
1565         /* Get trip points [_CRT, _PSV, etc.] (required) */
1566         result = acpi_thermal_get_trip_points(tz);
1567         if (result)
1568                 return result;
1569
1570         /* Set the cooling mode [_SCP] to active cooling (default) */
1571         result = acpi_thermal_set_cooling_mode(tz, ACPI_THERMAL_MODE_ACTIVE);
1572         if (!result)
1573                 tz->flags.cooling_mode = 1;
1574
1575         /* Get default polling frequency [_TZP] (optional) */
1576         if (tzp)
1577                 tz->polling_frequency = tzp;
1578         else
1579                 acpi_thermal_get_polling_frequency(tz);
1580
1581         return 0;
1582 }
1583
1584 static int acpi_thermal_add(struct acpi_device *device)
1585 {
1586         int result = 0;
1587         acpi_status status = AE_OK;
1588         struct acpi_thermal *tz = NULL;
1589
1590
1591         if (!device)
1592                 return -EINVAL;
1593
1594         tz = kzalloc(sizeof(struct acpi_thermal), GFP_KERNEL);
1595         if (!tz)
1596                 return -ENOMEM;
1597
1598         tz->device = device;
1599         strcpy(tz->name, device->pnp.bus_id);
1600         strcpy(acpi_device_name(device), ACPI_THERMAL_DEVICE_NAME);
1601         strcpy(acpi_device_class(device), ACPI_THERMAL_CLASS);
1602         acpi_driver_data(device) = tz;
1603         mutex_init(&tz->lock);
1604
1605
1606         result = acpi_thermal_get_info(tz);
1607         if (result)
1608                 goto free_memory;
1609
1610         result = acpi_thermal_register_thermal_zone(tz);
1611         if (result)
1612                 goto free_memory;
1613
1614         result = acpi_thermal_add_fs(device);
1615         if (result)
1616                 goto unregister_thermal_zone;
1617
1618         init_timer(&tz->timer);
1619
1620         acpi_thermal_check(tz);
1621
1622         status = acpi_install_notify_handler(device->handle,
1623                                              ACPI_DEVICE_NOTIFY,
1624                                              acpi_thermal_notify, tz);
1625         if (ACPI_FAILURE(status)) {
1626                 result = -ENODEV;
1627                 goto remove_fs;
1628         }
1629
1630         printk(KERN_INFO PREFIX "%s [%s] (%ld C)\n",
1631                acpi_device_name(device), acpi_device_bid(device),
1632                KELVIN_TO_CELSIUS(tz->temperature));
1633         goto end;
1634
1635 remove_fs:
1636         acpi_thermal_remove_fs(device);
1637 unregister_thermal_zone:
1638         thermal_zone_device_unregister(tz->thermal_zone);
1639 free_memory:
1640         kfree(tz);
1641 end:
1642         return result;
1643 }
1644
1645 static int acpi_thermal_remove(struct acpi_device *device, int type)
1646 {
1647         acpi_status status = AE_OK;
1648         struct acpi_thermal *tz = NULL;
1649
1650
1651         if (!device || !acpi_driver_data(device))
1652                 return -EINVAL;
1653
1654         tz = acpi_driver_data(device);
1655
1656         /* avoid timer adding new defer task */
1657         tz->zombie = 1;
1658         /* wait for running timer (on other CPUs) finish */
1659         del_timer_sync(&(tz->timer));
1660         /* synchronize deferred task */
1661         acpi_os_wait_events_complete(NULL);
1662         /* deferred task may reinsert timer */
1663         del_timer_sync(&(tz->timer));
1664
1665         status = acpi_remove_notify_handler(device->handle,
1666                                             ACPI_DEVICE_NOTIFY,
1667                                             acpi_thermal_notify);
1668
1669         /* Terminate policy */
1670         if (tz->trips.passive.flags.valid && tz->trips.passive.flags.enabled) {
1671                 tz->trips.passive.flags.enabled = 0;
1672                 acpi_thermal_passive(tz);
1673         }
1674         if (tz->trips.active[0].flags.valid
1675             && tz->trips.active[0].flags.enabled) {
1676                 tz->trips.active[0].flags.enabled = 0;
1677                 acpi_thermal_active(tz);
1678         }
1679
1680         acpi_thermal_remove_fs(device);
1681         acpi_thermal_unregister_thermal_zone(tz);
1682         mutex_destroy(&tz->lock);
1683         kfree(tz);
1684         return 0;
1685 }
1686
1687 static int acpi_thermal_resume(struct acpi_device *device)
1688 {
1689         struct acpi_thermal *tz = NULL;
1690         int i, j, power_state, result;
1691
1692
1693         if (!device || !acpi_driver_data(device))
1694                 return -EINVAL;
1695
1696         tz = acpi_driver_data(device);
1697
1698         for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++) {
1699                 if (!(&tz->trips.active[i]))
1700                         break;
1701                 if (!tz->trips.active[i].flags.valid)
1702                         break;
1703                 tz->trips.active[i].flags.enabled = 1;
1704                 for (j = 0; j < tz->trips.active[i].devices.count; j++) {
1705                         result = acpi_bus_get_power(tz->trips.active[i].devices.
1706                             handles[j], &power_state);
1707                         if (result || (power_state != ACPI_STATE_D0)) {
1708                                 tz->trips.active[i].flags.enabled = 0;
1709                                 break;
1710                         }
1711                 }
1712                 tz->state.active |= tz->trips.active[i].flags.enabled;
1713         }
1714
1715         acpi_thermal_check(tz);
1716
1717         return AE_OK;
1718 }
1719
1720 static int thermal_act(const struct dmi_system_id *d) {
1721
1722         if (act == 0) {
1723                 printk(KERN_NOTICE "ACPI: %s detected: "
1724                         "disabling all active thermal trip points\n", d->ident);
1725                 act = -1;
1726         }
1727         return 0;
1728 }
1729 static int thermal_nocrt(const struct dmi_system_id *d) {
1730
1731         printk(KERN_NOTICE "ACPI: %s detected: "
1732                 "disabling all critical thermal trip point actions.\n", d->ident);
1733         nocrt = 1;
1734         return 0;
1735 }
1736 static int thermal_tzp(const struct dmi_system_id *d) {
1737
1738         if (tzp == 0) {
1739                 printk(KERN_NOTICE "ACPI: %s detected: "
1740                         "enabling thermal zone polling\n", d->ident);
1741                 tzp = 300;      /* 300 dS = 30 Seconds */
1742         }
1743         return 0;
1744 }
1745 static int thermal_psv(const struct dmi_system_id *d) {
1746
1747         if (psv == 0) {
1748                 printk(KERN_NOTICE "ACPI: %s detected: "
1749                         "disabling all passive thermal trip points\n", d->ident);
1750                 psv = -1;
1751         }
1752         return 0;
1753 }
1754
1755 static struct dmi_system_id thermal_dmi_table[] __initdata = {
1756         /*
1757          * Award BIOS on this AOpen makes thermal control almost worthless.
1758          * http://bugzilla.kernel.org/show_bug.cgi?id=8842
1759          */
1760         {
1761          .callback = thermal_act,
1762          .ident = "AOpen i915GMm-HFS",
1763          .matches = {
1764                 DMI_MATCH(DMI_BOARD_VENDOR, "AOpen"),
1765                 DMI_MATCH(DMI_BOARD_NAME, "i915GMm-HFS"),
1766                 },
1767         },
1768         {
1769          .callback = thermal_psv,
1770          .ident = "AOpen i915GMm-HFS",
1771          .matches = {
1772                 DMI_MATCH(DMI_BOARD_VENDOR, "AOpen"),
1773                 DMI_MATCH(DMI_BOARD_NAME, "i915GMm-HFS"),
1774                 },
1775         },
1776         {
1777          .callback = thermal_tzp,
1778          .ident = "AOpen i915GMm-HFS",
1779          .matches = {
1780                 DMI_MATCH(DMI_BOARD_VENDOR, "AOpen"),
1781                 DMI_MATCH(DMI_BOARD_NAME, "i915GMm-HFS"),
1782                 },
1783         },
1784         {
1785          .callback = thermal_nocrt,
1786          .ident = "Gigabyte GA-7ZX",
1787          .matches = {
1788                 DMI_MATCH(DMI_BOARD_VENDOR, "Gigabyte Technology Co., Ltd."),
1789                 DMI_MATCH(DMI_BOARD_NAME, "7ZX"),
1790                 },
1791         },
1792         {}
1793 };
1794
1795 static int __init acpi_thermal_init(void)
1796 {
1797         int result = 0;
1798
1799         dmi_check_system(thermal_dmi_table);
1800
1801         if (off) {
1802                 printk(KERN_NOTICE "ACPI: thermal control disabled\n");
1803                 return -ENODEV;
1804         }
1805         acpi_thermal_dir = proc_mkdir(ACPI_THERMAL_CLASS, acpi_root_dir);
1806         if (!acpi_thermal_dir)
1807                 return -ENODEV;
1808         acpi_thermal_dir->owner = THIS_MODULE;
1809
1810         result = acpi_bus_register_driver(&acpi_thermal_driver);
1811         if (result < 0) {
1812                 remove_proc_entry(ACPI_THERMAL_CLASS, acpi_root_dir);
1813                 return -ENODEV;
1814         }
1815
1816         return 0;
1817 }
1818
1819 static void __exit acpi_thermal_exit(void)
1820 {
1821
1822         acpi_bus_unregister_driver(&acpi_thermal_driver);
1823
1824         remove_proc_entry(ACPI_THERMAL_CLASS, acpi_root_dir);
1825
1826         return;
1827 }
1828
1829 module_init(acpi_thermal_init);
1830 module_exit(acpi_thermal_exit);