]> www.pilppa.org Git - linux-2.6-omap-h63xx.git/blob - drivers/acpi/events/evxfevnt.c
Merge branch 'ec' into release
[linux-2.6-omap-h63xx.git] / drivers / acpi / events / evxfevnt.c
1 /******************************************************************************
2  *
3  * Module Name: evxfevnt - External Interfaces, ACPI event disable/enable
4  *
5  *****************************************************************************/
6
7 /*
8  * Copyright (C) 2000 - 2008, Intel Corp.
9  * All rights reserved.
10  *
11  * Redistribution and use in source and binary forms, with or without
12  * modification, are permitted provided that the following conditions
13  * are met:
14  * 1. Redistributions of source code must retain the above copyright
15  *    notice, this list of conditions, and the following disclaimer,
16  *    without modification.
17  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
18  *    substantially similar to the "NO WARRANTY" disclaimer below
19  *    ("Disclaimer") and any redistribution must be conditioned upon
20  *    including a substantially similar Disclaimer requirement for further
21  *    binary redistribution.
22  * 3. Neither the names of the above-listed copyright holders nor the names
23  *    of any contributors may be used to endorse or promote products derived
24  *    from this software without specific prior written permission.
25  *
26  * Alternatively, this software may be distributed under the terms of the
27  * GNU General Public License ("GPL") version 2 as published by the Free
28  * Software Foundation.
29  *
30  * NO WARRANTY
31  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
32  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
33  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
34  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
35  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
36  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
37  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
38  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
39  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
40  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
41  * POSSIBILITY OF SUCH DAMAGES.
42  */
43
44 #include <acpi/acpi.h>
45 #include <acpi/acevents.h>
46 #include <acpi/acnamesp.h>
47 #include <acpi/actables.h>
48
49 #define _COMPONENT          ACPI_EVENTS
50 ACPI_MODULE_NAME("evxfevnt")
51
52 /*******************************************************************************
53  *
54  * FUNCTION:    acpi_enable
55  *
56  * PARAMETERS:  None
57  *
58  * RETURN:      Status
59  *
60  * DESCRIPTION: Transfers the system into ACPI mode.
61  *
62  ******************************************************************************/
63 acpi_status acpi_enable(void)
64 {
65         acpi_status status = AE_OK;
66
67         ACPI_FUNCTION_TRACE(acpi_enable);
68
69         /* ACPI tables must be present */
70
71         if (!acpi_tb_tables_loaded()) {
72                 return_ACPI_STATUS(AE_NO_ACPI_TABLES);
73         }
74
75         /* Check current mode */
76
77         if (acpi_hw_get_mode() == ACPI_SYS_MODE_ACPI) {
78                 ACPI_DEBUG_PRINT((ACPI_DB_INIT,
79                                   "System is already in ACPI mode\n"));
80         } else {
81                 /* Transition to ACPI mode */
82
83                 status = acpi_hw_set_mode(ACPI_SYS_MODE_ACPI);
84                 if (ACPI_FAILURE(status)) {
85                         ACPI_ERROR((AE_INFO,
86                                     "Could not transition to ACPI mode"));
87                         return_ACPI_STATUS(status);
88                 }
89
90                 ACPI_DEBUG_PRINT((ACPI_DB_INIT,
91                                   "Transition to ACPI mode successful\n"));
92         }
93
94         return_ACPI_STATUS(status);
95 }
96
97 ACPI_EXPORT_SYMBOL(acpi_enable)
98
99 /*******************************************************************************
100  *
101  * FUNCTION:    acpi_disable
102  *
103  * PARAMETERS:  None
104  *
105  * RETURN:      Status
106  *
107  * DESCRIPTION: Transfers the system into LEGACY (non-ACPI) mode.
108  *
109  ******************************************************************************/
110 acpi_status acpi_disable(void)
111 {
112         acpi_status status = AE_OK;
113
114         ACPI_FUNCTION_TRACE(acpi_disable);
115
116         if (acpi_hw_get_mode() == ACPI_SYS_MODE_LEGACY) {
117                 ACPI_DEBUG_PRINT((ACPI_DB_INIT,
118                                   "System is already in legacy (non-ACPI) mode\n"));
119         } else {
120                 /* Transition to LEGACY mode */
121
122                 status = acpi_hw_set_mode(ACPI_SYS_MODE_LEGACY);
123
124                 if (ACPI_FAILURE(status)) {
125                         ACPI_ERROR((AE_INFO,
126                                     "Could not exit ACPI mode to legacy mode"));
127                         return_ACPI_STATUS(status);
128                 }
129
130                 ACPI_DEBUG_PRINT((ACPI_DB_INIT, "ACPI mode disabled\n"));
131         }
132
133         return_ACPI_STATUS(status);
134 }
135
136 ACPI_EXPORT_SYMBOL(acpi_disable)
137
138 /*******************************************************************************
139  *
140  * FUNCTION:    acpi_enable_event
141  *
142  * PARAMETERS:  Event           - The fixed eventto be enabled
143  *              Flags           - Reserved
144  *
145  * RETURN:      Status
146  *
147  * DESCRIPTION: Enable an ACPI event (fixed)
148  *
149  ******************************************************************************/
150 acpi_status acpi_enable_event(u32 event, u32 flags)
151 {
152         acpi_status status = AE_OK;
153         u32 value;
154
155         ACPI_FUNCTION_TRACE(acpi_enable_event);
156
157         /* Decode the Fixed Event */
158
159         if (event > ACPI_EVENT_MAX) {
160                 return_ACPI_STATUS(AE_BAD_PARAMETER);
161         }
162
163         /*
164          * Enable the requested fixed event (by writing a one to the
165          * enable register bit)
166          */
167         status =
168             acpi_set_register(acpi_gbl_fixed_event_info[event].
169                               enable_register_id, 1);
170         if (ACPI_FAILURE(status)) {
171                 return_ACPI_STATUS(status);
172         }
173
174         /* Make sure that the hardware responded */
175
176         status =
177             acpi_get_register(acpi_gbl_fixed_event_info[event].
178                               enable_register_id, &value);
179         if (ACPI_FAILURE(status)) {
180                 return_ACPI_STATUS(status);
181         }
182
183         if (value != 1) {
184                 ACPI_ERROR((AE_INFO,
185                             "Could not enable %s event",
186                             acpi_ut_get_event_name(event)));
187                 return_ACPI_STATUS(AE_NO_HARDWARE_RESPONSE);
188         }
189
190         return_ACPI_STATUS(status);
191 }
192
193 ACPI_EXPORT_SYMBOL(acpi_enable_event)
194
195 /*******************************************************************************
196  *
197  * FUNCTION:    acpi_set_gpe_type
198  *
199  * PARAMETERS:  gpe_device      - Parent GPE Device
200  *              gpe_number      - GPE level within the GPE block
201  *              Type            - New GPE type
202  *
203  * RETURN:      Status
204  *
205  * DESCRIPTION: Set the type of an individual GPE
206  *
207  ******************************************************************************/
208 acpi_status acpi_set_gpe_type(acpi_handle gpe_device, u32 gpe_number, u8 type)
209 {
210         acpi_status status = AE_OK;
211         struct acpi_gpe_event_info *gpe_event_info;
212
213         ACPI_FUNCTION_TRACE(acpi_set_gpe_type);
214
215         /* Ensure that we have a valid GPE number */
216
217         gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number);
218         if (!gpe_event_info) {
219                 status = AE_BAD_PARAMETER;
220                 goto unlock_and_exit;
221         }
222
223         if ((gpe_event_info->flags & ACPI_GPE_TYPE_MASK) == type) {
224                 return_ACPI_STATUS(AE_OK);
225         }
226
227         /* Set the new type (will disable GPE if currently enabled) */
228
229         status = acpi_ev_set_gpe_type(gpe_event_info, type);
230
231       unlock_and_exit:
232         return_ACPI_STATUS(status);
233 }
234
235 ACPI_EXPORT_SYMBOL(acpi_set_gpe_type)
236
237 /*******************************************************************************
238  *
239  * FUNCTION:    acpi_enable_gpe
240  *
241  * PARAMETERS:  gpe_device      - Parent GPE Device
242  *              gpe_number      - GPE level within the GPE block
243  *              Flags           - Just enable, or also wake enable?
244  *                                Called from ISR or not
245  *
246  * RETURN:      Status
247  *
248  * DESCRIPTION: Enable an ACPI event (general purpose)
249  *
250  ******************************************************************************/
251 acpi_status acpi_enable_gpe(acpi_handle gpe_device, u32 gpe_number)
252 {
253         acpi_status status = AE_OK;
254         acpi_cpu_flags flags;
255         struct acpi_gpe_event_info *gpe_event_info;
256
257         ACPI_FUNCTION_TRACE(acpi_enable_gpe);
258
259         flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
260
261         /* Ensure that we have a valid GPE number */
262
263         gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number);
264         if (!gpe_event_info) {
265                 status = AE_BAD_PARAMETER;
266                 goto unlock_and_exit;
267         }
268
269         /* Perform the enable */
270
271         status = acpi_ev_enable_gpe(gpe_event_info, TRUE);
272
273       unlock_and_exit:
274         acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
275         return_ACPI_STATUS(status);
276 }
277
278 ACPI_EXPORT_SYMBOL(acpi_enable_gpe)
279
280 /*******************************************************************************
281  *
282  * FUNCTION:    acpi_disable_gpe
283  *
284  * PARAMETERS:  gpe_device      - Parent GPE Device
285  *              gpe_number      - GPE level within the GPE block
286  *              Flags           - Just disable, or also wake disable?
287  *                                Called from ISR or not
288  *
289  * RETURN:      Status
290  *
291  * DESCRIPTION: Disable an ACPI event (general purpose)
292  *
293  ******************************************************************************/
294 acpi_status acpi_disable_gpe(acpi_handle gpe_device, u32 gpe_number)
295 {
296         acpi_status status = AE_OK;
297         acpi_cpu_flags flags;
298         struct acpi_gpe_event_info *gpe_event_info;
299
300         ACPI_FUNCTION_TRACE(acpi_disable_gpe);
301
302         flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
303         /* Ensure that we have a valid GPE number */
304
305         gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number);
306         if (!gpe_event_info) {
307                 status = AE_BAD_PARAMETER;
308                 goto unlock_and_exit;
309         }
310
311         status = acpi_ev_disable_gpe(gpe_event_info);
312
313 unlock_and_exit:
314         acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
315         return_ACPI_STATUS(status);
316 }
317
318 ACPI_EXPORT_SYMBOL(acpi_disable_gpe)
319
320 /*******************************************************************************
321  *
322  * FUNCTION:    acpi_disable_event
323  *
324  * PARAMETERS:  Event           - The fixed eventto be enabled
325  *              Flags           - Reserved
326  *
327  * RETURN:      Status
328  *
329  * DESCRIPTION: Disable an ACPI event (fixed)
330  *
331  ******************************************************************************/
332 acpi_status acpi_disable_event(u32 event, u32 flags)
333 {
334         acpi_status status = AE_OK;
335         u32 value;
336
337         ACPI_FUNCTION_TRACE(acpi_disable_event);
338
339         /* Decode the Fixed Event */
340
341         if (event > ACPI_EVENT_MAX) {
342                 return_ACPI_STATUS(AE_BAD_PARAMETER);
343         }
344
345         /*
346          * Disable the requested fixed event (by writing a zero to the
347          * enable register bit)
348          */
349         status =
350             acpi_set_register(acpi_gbl_fixed_event_info[event].
351                               enable_register_id, 0);
352         if (ACPI_FAILURE(status)) {
353                 return_ACPI_STATUS(status);
354         }
355
356         status =
357             acpi_get_register(acpi_gbl_fixed_event_info[event].
358                               enable_register_id, &value);
359         if (ACPI_FAILURE(status)) {
360                 return_ACPI_STATUS(status);
361         }
362
363         if (value != 0) {
364                 ACPI_ERROR((AE_INFO,
365                             "Could not disable %s events",
366                             acpi_ut_get_event_name(event)));
367                 return_ACPI_STATUS(AE_NO_HARDWARE_RESPONSE);
368         }
369
370         return_ACPI_STATUS(status);
371 }
372
373 ACPI_EXPORT_SYMBOL(acpi_disable_event)
374
375 /*******************************************************************************
376  *
377  * FUNCTION:    acpi_clear_event
378  *
379  * PARAMETERS:  Event           - The fixed event to be cleared
380  *
381  * RETURN:      Status
382  *
383  * DESCRIPTION: Clear an ACPI event (fixed)
384  *
385  ******************************************************************************/
386 acpi_status acpi_clear_event(u32 event)
387 {
388         acpi_status status = AE_OK;
389
390         ACPI_FUNCTION_TRACE(acpi_clear_event);
391
392         /* Decode the Fixed Event */
393
394         if (event > ACPI_EVENT_MAX) {
395                 return_ACPI_STATUS(AE_BAD_PARAMETER);
396         }
397
398         /*
399          * Clear the requested fixed event (By writing a one to the
400          * status register bit)
401          */
402         status =
403             acpi_set_register(acpi_gbl_fixed_event_info[event].
404                               status_register_id, 1);
405
406         return_ACPI_STATUS(status);
407 }
408
409 ACPI_EXPORT_SYMBOL(acpi_clear_event)
410
411 /*******************************************************************************
412  *
413  * FUNCTION:    acpi_clear_gpe
414  *
415  * PARAMETERS:  gpe_device      - Parent GPE Device
416  *              gpe_number      - GPE level within the GPE block
417  *              Flags           - Called from an ISR or not
418  *
419  * RETURN:      Status
420  *
421  * DESCRIPTION: Clear an ACPI event (general purpose)
422  *
423  ******************************************************************************/
424 acpi_status acpi_clear_gpe(acpi_handle gpe_device, u32 gpe_number, u32 flags)
425 {
426         acpi_status status = AE_OK;
427         struct acpi_gpe_event_info *gpe_event_info;
428
429         ACPI_FUNCTION_TRACE(acpi_clear_gpe);
430
431         /* Use semaphore lock if not executing at interrupt level */
432
433         if (flags & ACPI_NOT_ISR) {
434                 status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS);
435                 if (ACPI_FAILURE(status)) {
436                         return_ACPI_STATUS(status);
437                 }
438         }
439
440         /* Ensure that we have a valid GPE number */
441
442         gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number);
443         if (!gpe_event_info) {
444                 status = AE_BAD_PARAMETER;
445                 goto unlock_and_exit;
446         }
447
448         status = acpi_hw_clear_gpe(gpe_event_info);
449
450       unlock_and_exit:
451         if (flags & ACPI_NOT_ISR) {
452                 (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS);
453         }
454         return_ACPI_STATUS(status);
455 }
456
457 ACPI_EXPORT_SYMBOL(acpi_clear_gpe)
458 /*******************************************************************************
459  *
460  * FUNCTION:    acpi_get_event_status
461  *
462  * PARAMETERS:  Event           - The fixed event
463  *              event_status    - Where the current status of the event will
464  *                                be returned
465  *
466  * RETURN:      Status
467  *
468  * DESCRIPTION: Obtains and returns the current status of the event
469  *
470  ******************************************************************************/
471 acpi_status acpi_get_event_status(u32 event, acpi_event_status * event_status)
472 {
473         acpi_status status = AE_OK;
474         u32 value;
475
476         ACPI_FUNCTION_TRACE(acpi_get_event_status);
477
478         if (!event_status) {
479                 return_ACPI_STATUS(AE_BAD_PARAMETER);
480         }
481
482         /* Decode the Fixed Event */
483
484         if (event > ACPI_EVENT_MAX) {
485                 return_ACPI_STATUS(AE_BAD_PARAMETER);
486         }
487
488         /* Get the status of the requested fixed event */
489
490         status =
491             acpi_get_register(acpi_gbl_fixed_event_info[event].
492                               enable_register_id, &value);
493         if (ACPI_FAILURE(status))
494                 return_ACPI_STATUS(status);
495
496         *event_status = value;
497
498         status =
499             acpi_get_register(acpi_gbl_fixed_event_info[event].
500                               status_register_id, &value);
501         if (ACPI_FAILURE(status))
502                 return_ACPI_STATUS(status);
503
504         if (value)
505                 *event_status |= ACPI_EVENT_FLAG_SET;
506
507         if (acpi_gbl_fixed_event_handlers[event].handler)
508                 *event_status |= ACPI_EVENT_FLAG_HANDLE;
509
510         return_ACPI_STATUS(status);
511 }
512
513 ACPI_EXPORT_SYMBOL(acpi_get_event_status)
514
515 /*******************************************************************************
516  *
517  * FUNCTION:    acpi_get_gpe_status
518  *
519  * PARAMETERS:  gpe_device      - Parent GPE Device
520  *              gpe_number      - GPE level within the GPE block
521  *              Flags           - Called from an ISR or not
522  *              event_status    - Where the current status of the event will
523  *                                be returned
524  *
525  * RETURN:      Status
526  *
527  * DESCRIPTION: Get status of an event (general purpose)
528  *
529  ******************************************************************************/
530 acpi_status
531 acpi_get_gpe_status(acpi_handle gpe_device,
532                     u32 gpe_number, u32 flags, acpi_event_status * event_status)
533 {
534         acpi_status status = AE_OK;
535         struct acpi_gpe_event_info *gpe_event_info;
536
537         ACPI_FUNCTION_TRACE(acpi_get_gpe_status);
538
539         /* Use semaphore lock if not executing at interrupt level */
540
541         if (flags & ACPI_NOT_ISR) {
542                 status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS);
543                 if (ACPI_FAILURE(status)) {
544                         return_ACPI_STATUS(status);
545                 }
546         }
547
548         /* Ensure that we have a valid GPE number */
549
550         gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number);
551         if (!gpe_event_info) {
552                 status = AE_BAD_PARAMETER;
553                 goto unlock_and_exit;
554         }
555
556         /* Obtain status on the requested GPE number */
557
558         status = acpi_hw_get_gpe_status(gpe_event_info, event_status);
559
560         if (gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK)
561                 *event_status |= ACPI_EVENT_FLAG_HANDLE;
562
563       unlock_and_exit:
564         if (flags & ACPI_NOT_ISR) {
565                 (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS);
566         }
567         return_ACPI_STATUS(status);
568 }
569
570 ACPI_EXPORT_SYMBOL(acpi_get_gpe_status)
571 /*******************************************************************************
572  *
573  * FUNCTION:    acpi_install_gpe_block
574  *
575  * PARAMETERS:  gpe_device          - Handle to the parent GPE Block Device
576  *              gpe_block_address   - Address and space_iD
577  *              register_count      - Number of GPE register pairs in the block
578  *              interrupt_number    - H/W interrupt for the block
579  *
580  * RETURN:      Status
581  *
582  * DESCRIPTION: Create and Install a block of GPE registers
583  *
584  ******************************************************************************/
585 acpi_status
586 acpi_install_gpe_block(acpi_handle gpe_device,
587                        struct acpi_generic_address *gpe_block_address,
588                        u32 register_count, u32 interrupt_number)
589 {
590         acpi_status status;
591         union acpi_operand_object *obj_desc;
592         struct acpi_namespace_node *node;
593         struct acpi_gpe_block_info *gpe_block;
594
595         ACPI_FUNCTION_TRACE(acpi_install_gpe_block);
596
597         if ((!gpe_device) || (!gpe_block_address) || (!register_count)) {
598                 return_ACPI_STATUS(AE_BAD_PARAMETER);
599         }
600
601         status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
602         if (ACPI_FAILURE(status)) {
603                 return (status);
604         }
605
606         node = acpi_ns_map_handle_to_node(gpe_device);
607         if (!node) {
608                 status = AE_BAD_PARAMETER;
609                 goto unlock_and_exit;
610         }
611
612         /*
613          * For user-installed GPE Block Devices, the gpe_block_base_number
614          * is always zero
615          */
616         status =
617             acpi_ev_create_gpe_block(node, gpe_block_address, register_count, 0,
618                                      interrupt_number, &gpe_block);
619         if (ACPI_FAILURE(status)) {
620                 goto unlock_and_exit;
621         }
622
623         /* Run the _PRW methods and enable the GPEs */
624
625         status = acpi_ev_initialize_gpe_block(node, gpe_block);
626         if (ACPI_FAILURE(status)) {
627                 goto unlock_and_exit;
628         }
629
630         /* Get the device_object attached to the node */
631
632         obj_desc = acpi_ns_get_attached_object(node);
633         if (!obj_desc) {
634
635                 /* No object, create a new one */
636
637                 obj_desc = acpi_ut_create_internal_object(ACPI_TYPE_DEVICE);
638                 if (!obj_desc) {
639                         status = AE_NO_MEMORY;
640                         goto unlock_and_exit;
641                 }
642
643                 status =
644                     acpi_ns_attach_object(node, obj_desc, ACPI_TYPE_DEVICE);
645
646                 /* Remove local reference to the object */
647
648                 acpi_ut_remove_reference(obj_desc);
649
650                 if (ACPI_FAILURE(status)) {
651                         goto unlock_and_exit;
652                 }
653         }
654
655         /* Install the GPE block in the device_object */
656
657         obj_desc->device.gpe_block = gpe_block;
658
659       unlock_and_exit:
660         (void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
661         return_ACPI_STATUS(status);
662 }
663
664 ACPI_EXPORT_SYMBOL(acpi_install_gpe_block)
665
666 /*******************************************************************************
667  *
668  * FUNCTION:    acpi_remove_gpe_block
669  *
670  * PARAMETERS:  gpe_device          - Handle to the parent GPE Block Device
671  *
672  * RETURN:      Status
673  *
674  * DESCRIPTION: Remove a previously installed block of GPE registers
675  *
676  ******************************************************************************/
677 acpi_status acpi_remove_gpe_block(acpi_handle gpe_device)
678 {
679         union acpi_operand_object *obj_desc;
680         acpi_status status;
681         struct acpi_namespace_node *node;
682
683         ACPI_FUNCTION_TRACE(acpi_remove_gpe_block);
684
685         if (!gpe_device) {
686                 return_ACPI_STATUS(AE_BAD_PARAMETER);
687         }
688
689         status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
690         if (ACPI_FAILURE(status)) {
691                 return (status);
692         }
693
694         node = acpi_ns_map_handle_to_node(gpe_device);
695         if (!node) {
696                 status = AE_BAD_PARAMETER;
697                 goto unlock_and_exit;
698         }
699
700         /* Get the device_object attached to the node */
701
702         obj_desc = acpi_ns_get_attached_object(node);
703         if (!obj_desc || !obj_desc->device.gpe_block) {
704                 return_ACPI_STATUS(AE_NULL_OBJECT);
705         }
706
707         /* Delete the GPE block (but not the device_object) */
708
709         status = acpi_ev_delete_gpe_block(obj_desc->device.gpe_block);
710         if (ACPI_SUCCESS(status)) {
711                 obj_desc->device.gpe_block = NULL;
712         }
713
714       unlock_and_exit:
715         (void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
716         return_ACPI_STATUS(status);
717 }
718
719 ACPI_EXPORT_SYMBOL(acpi_remove_gpe_block)