drivers/acpi/acpica/exstoren.c

   1
   2 /******************************************************************************
   3  *
   4  * Module Name: exstoren - AML Interpreter object store support,
   5  *                        Store to Node (namespace object)
   6  *
   7  *****************************************************************************/
   8
   9 /*
  10  * Copyright (C) 2000 - 2008, Intel Corp.
  11  * All rights reserved.
  12  *
  13  * Redistribution and use in source and binary forms, with or without
  14  * modification, are permitted provided that the following conditions
  15  * are met:
  16  * 1. Redistributions of source code must retain the above copyright
  17  *    notice, this list of conditions, and the following disclaimer,
  18  *    without modification.
  19  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
  20  *    substantially similar to the "NO WARRANTY" disclaimer below
  21  *    ("Disclaimer") and any redistribution must be conditioned upon
  22  *    including a substantially similar Disclaimer requirement for further
  23  *    binary redistribution.
  24  * 3. Neither the names of the above-listed copyright holders nor the names
  25  *    of any contributors may be used to endorse or promote products derived
  26  *    from this software without specific prior written permission.
  27  *
  28  * Alternatively, this software may be distributed under the terms of the
  29  * GNU General Public License ("GPL") version 2 as published by the Free
  30  * Software Foundation.
  31  *
  32  * NO WARRANTY
  33  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  34  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  35  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
  36  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  37  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  38  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  39  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  40  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  41  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
  42  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  43  * POSSIBILITY OF SUCH DAMAGES.
  44  */
  45
  46 #include <acpi/acpi.h>
  47 #include "accommon.h"
  48 #include "acinterp.h"
  49 #include "amlcode.h"
  50
  51 #define _COMPONENT          ACPI_EXECUTER
  52 ACPI_MODULE_NAME("exstoren")
  53
  54 /*******************************************************************************
  55  *
  56  * FUNCTION:    acpi_ex_resolve_object
  57  *
  58  * PARAMETERS:  source_desc_ptr     - Pointer to the source object
  59  *              target_type         - Current type of the target
  60  *              walk_state          - Current walk state
  61  *
  62  * RETURN:      Status, resolved object in source_desc_ptr.
  63  *
  64  * DESCRIPTION: Resolve an object.  If the object is a reference, dereference
  65  *              it and return the actual object in the source_desc_ptr.
  66  *
  67  ******************************************************************************/
  68 acpi_status
  69 acpi_ex_resolve_object(union acpi_operand_object **source_desc_ptr,
  70                        acpi_object_type target_type,
  71                        struct acpi_walk_state *walk_state)
  72 {
  73         union acpi_operand_object *source_desc = *source_desc_ptr;
  74         acpi_status status = AE_OK;
  75
  76         ACPI_FUNCTION_TRACE(ex_resolve_object);
  77
  78         /* Ensure we have a Target that can be stored to */
  79
  80         switch (target_type) {
  81         case ACPI_TYPE_BUFFER_FIELD:
  82         case ACPI_TYPE_LOCAL_REGION_FIELD:
  83         case ACPI_TYPE_LOCAL_BANK_FIELD:
  84         case ACPI_TYPE_LOCAL_INDEX_FIELD:
  85                 /*
  86                  * These cases all require only Integers or values that
  87                  * can be converted to Integers (Strings or Buffers)
  88                  */
  89
  90         case ACPI_TYPE_INTEGER:
  91         case ACPI_TYPE_STRING:
  92         case ACPI_TYPE_BUFFER:
  93
  94                 /*
  95                  * Stores into a Field/Region or into a Integer/Buffer/String
  96                  * are all essentially the same.  This case handles the
  97                  * "interchangeable" types Integer, String, and Buffer.
  98                  */
  99                 if (ACPI_GET_OBJECT_TYPE(source_desc) ==
 100                     ACPI_TYPE_LOCAL_REFERENCE) {
 101
 102                         /* Resolve a reference object first */
 103
 104                         status =
 105                             acpi_ex_resolve_to_value(source_desc_ptr,
 106                                                      walk_state);
 107                         if (ACPI_FAILURE(status)) {
 108                                 break;
 109                         }
 110                 }
 111
 112                 /* For copy_object, no further validation necessary */
 113
 114                 if (walk_state->opcode == AML_COPY_OP) {
 115                         break;
 116                 }
 117
 118                 /* Must have a Integer, Buffer, or String */
 119
 120                 if ((ACPI_GET_OBJECT_TYPE(source_desc) != ACPI_TYPE_INTEGER) &&
 121                     (ACPI_GET_OBJECT_TYPE(source_desc) != ACPI_TYPE_BUFFER) &&
 122                     (ACPI_GET_OBJECT_TYPE(source_desc) != ACPI_TYPE_STRING) &&
 123                     !((ACPI_GET_OBJECT_TYPE(source_desc) ==
 124                        ACPI_TYPE_LOCAL_REFERENCE)
 125                       && (source_desc->reference.class ==
 126                           ACPI_REFCLASS_TABLE))) {
 127
 128                         /* Conversion successful but still not a valid type */
 129
 130                         ACPI_ERROR((AE_INFO,
 131                                     "Cannot assign type %s to %s (must be type Int/Str/Buf)",
 132                                     acpi_ut_get_object_type_name(source_desc),
 133                                     acpi_ut_get_type_name(target_type)));
 134                         status = AE_AML_OPERAND_TYPE;
 135                 }
 136                 break;
 137
 138         case ACPI_TYPE_LOCAL_ALIAS:
 139         case ACPI_TYPE_LOCAL_METHOD_ALIAS:
 140
 141                 /*
 142                  * All aliases should have been resolved earlier, during the
 143                  * operand resolution phase.
 144                  */
 145                 ACPI_ERROR((AE_INFO, "Store into an unresolved Alias object"));
 146                 status = AE_AML_INTERNAL;
 147                 break;
 148
 149         case ACPI_TYPE_PACKAGE:
 150         default:
 151
 152                 /*
 153                  * All other types than Alias and the various Fields come here,
 154                  * including the untyped case - ACPI_TYPE_ANY.
 155                  */
 156                 break;
 157         }
 158
 159         return_ACPI_STATUS(status);
 160 }
 161
 162 /*******************************************************************************
 163  *
 164  * FUNCTION:    acpi_ex_store_object_to_object
 165  *
 166  * PARAMETERS:  source_desc         - Object to store
 167  *              dest_desc           - Object to receive a copy of the source
 168  *              new_desc            - New object if dest_desc is obsoleted
 169  *              walk_state          - Current walk state
 170  *
 171  * RETURN:      Status
 172  *
 173  * DESCRIPTION: "Store" an object to another object.  This may include
 174  *              converting the source type to the target type (implicit
 175  *              conversion), and a copy of the value of the source to
 176  *              the target.
 177  *
 178  *              The Assignment of an object to another (not named) object
 179  *              is handled here.
 180  *              The Source passed in will replace the current value (if any)
 181  *              with the input value.
 182  *
 183  *              When storing into an object the data is converted to the
 184  *              target object type then stored in the object.  This means
 185  *              that the target object type (for an initialized target) will
 186  *              not be changed by a store operation.
 187  *
 188  *              This module allows destination types of Number, String,
 189  *              Buffer, and Package.
 190  *
 191  *              Assumes parameters are already validated.  NOTE: source_desc
 192  *              resolution (from a reference object) must be performed by
 193  *              the caller if necessary.
 194  *
 195  ******************************************************************************/
 196
 197 acpi_status
 198 acpi_ex_store_object_to_object(union acpi_operand_object *source_desc,
 199                                union acpi_operand_object *dest_desc,
 200                                union acpi_operand_object **new_desc,
 201                                struct acpi_walk_state *walk_state)
 202 {
 203         union acpi_operand_object *actual_src_desc;
 204         acpi_status status = AE_OK;
 205
 206         ACPI_FUNCTION_TRACE_PTR(ex_store_object_to_object, source_desc);
 207
 208         actual_src_desc = source_desc;
 209         if (!dest_desc) {
 210                 /*
 211                  * There is no destination object (An uninitialized node or
 212                  * package element), so we can simply copy the source object
 213                  * creating a new destination object
 214                  */
 215                 status =
 216                     acpi_ut_copy_iobject_to_iobject(actual_src_desc, new_desc,
 217                                                     walk_state);
 218                 return_ACPI_STATUS(status);
 219         }
 220
 221         if (ACPI_GET_OBJECT_TYPE(source_desc) !=
 222             ACPI_GET_OBJECT_TYPE(dest_desc)) {
 223                 /*
 224                  * The source type does not match the type of the destination.
 225                  * Perform the "implicit conversion" of the source to the current type
 226                  * of the target as per the ACPI specification.
 227                  *
 228                  * If no conversion performed, actual_src_desc = source_desc.
 229                  * Otherwise, actual_src_desc is a temporary object to hold the
 230                  * converted object.
 231                  */
 232                 status =
 233                     acpi_ex_convert_to_target_type(ACPI_GET_OBJECT_TYPE
 234                                                    (dest_desc), source_desc,
 235                                                    &actual_src_desc,
 236                                                    walk_state);
 237                 if (ACPI_FAILURE(status)) {
 238                         return_ACPI_STATUS(status);
 239                 }
 240
 241                 if (source_desc == actual_src_desc) {
 242                         /*
 243                          * No conversion was performed. Return the source_desc as the
 244                          * new object.
 245                          */
 246                         *new_desc = source_desc;
 247                         return_ACPI_STATUS(AE_OK);
 248                 }
 249         }
 250
 251         /*
 252          * We now have two objects of identical types, and we can perform a
 253          * copy of the *value* of the source object.
 254          */
 255         switch (ACPI_GET_OBJECT_TYPE(dest_desc)) {
 256         case ACPI_TYPE_INTEGER:
 257
 258                 dest_desc->integer.value = actual_src_desc->integer.value;
 259
 260                 /* Truncate value if we are executing from a 32-bit ACPI table */
 261
 262                 acpi_ex_truncate_for32bit_table(dest_desc);
 263                 break;
 264
 265         case ACPI_TYPE_STRING:
 266
 267                 status =
 268                     acpi_ex_store_string_to_string(actual_src_desc, dest_desc);
 269                 break;
 270
 271         case ACPI_TYPE_BUFFER:
 272
 273                 status =
 274                     acpi_ex_store_buffer_to_buffer(actual_src_desc, dest_desc);
 275                 break;
 276
 277         case ACPI_TYPE_PACKAGE:
 278
 279                 status =
 280                     acpi_ut_copy_iobject_to_iobject(actual_src_desc, &dest_desc,
 281                                                     walk_state);
 282                 break;
 283
 284         default:
 285                 /*
 286                  * All other types come here.
 287                  */
 288                 ACPI_WARNING((AE_INFO, "Store into type %s not implemented",
 289                               acpi_ut_get_object_type_name(dest_desc)));
 290
 291                 status = AE_NOT_IMPLEMENTED;
 292                 break;
 293         }
 294
 295         if (actual_src_desc != source_desc) {
 296
 297                 /* Delete the intermediate (temporary) source object */
 298
 299                 acpi_ut_remove_reference(actual_src_desc);
 300         }
 301
 302         *new_desc = dest_desc;
 303         return_ACPI_STATUS(status);
 304 }