arch/x86/oprofile/op_model_ppro.c

   1 /*
   2  * @file op_model_ppro.h
   3  * Family 6 perfmon and architectural perfmon MSR operations
   4  *
   5  * @remark Copyright 2002 OProfile authors
   6  * @remark Copyright 2008 Intel Corporation
   7  * @remark Read the file COPYING
   8  *
   9  * @author John Levon
  10  * @author Philippe Elie
  11  * @author Graydon Hoare
  12  * @author Andi Kleen
  13  */
  14
  15 #include <linux/oprofile.h>
  16 #include <linux/slab.h>
  17 #include <asm/ptrace.h>
  18 #include <asm/msr.h>
  19 #include <asm/apic.h>
  20 #include <asm/nmi.h>
  21 #include <asm/intel_arch_perfmon.h>
  22
  23 #include "op_x86_model.h"
  24 #include "op_counter.h"
  25
  26 static int num_counters = 2;
  27 static int counter_width = 32;
  28
  29 #define CTR_IS_RESERVED(msrs, c) (msrs->counters[(c)].addr ? 1 : 0)
  30 #define CTR_OVERFLOWED(n) (!((n) & (1ULL<<(counter_width-1))))
  31
  32 #define CTRL_IS_RESERVED(msrs, c) (msrs->controls[(c)].addr ? 1 : 0)
  33 #define CTRL_READ(l, h, msrs, c) do {rdmsr((msrs->controls[(c)].addr), (l), (h)); } while (0)
  34 #define CTRL_WRITE(l, h, msrs, c) do {wrmsr((msrs->controls[(c)].addr), (l), (h)); } while (0)
  35 #define CTRL_SET_ACTIVE(n) (n |= (1<<22))
  36 #define CTRL_SET_INACTIVE(n) (n &= ~(1<<22))
  37 #define CTRL_CLEAR(x) (x &= (1<<21))
  38 #define CTRL_SET_ENABLE(val) (val |= 1<<20)
  39 #define CTRL_SET_USR(val, u) (val |= ((u & 1) << 16))
  40 #define CTRL_SET_KERN(val, k) (val |= ((k & 1) << 17))
  41 #define CTRL_SET_UM(val, m) (val |= (m << 8))
  42 #define CTRL_SET_EVENT(val, e) (val |= e)
  43
  44 static u64 *reset_value;
  45
  46 static void ppro_fill_in_addresses(struct op_msrs * const msrs)
  47 {
  48         int i;
  49
  50         for (i = 0; i < num_counters; i++) {
  51                 if (reserve_perfctr_nmi(MSR_P6_PERFCTR0 + i))
  52                         msrs->counters[i].addr = MSR_P6_PERFCTR0 + i;
  53                 else
  54                         msrs->counters[i].addr = 0;
  55         }
  56
  57         for (i = 0; i < num_counters; i++) {
  58                 if (reserve_evntsel_nmi(MSR_P6_EVNTSEL0 + i))
  59                         msrs->controls[i].addr = MSR_P6_EVNTSEL0 + i;
  60                 else
  61                         msrs->controls[i].addr = 0;
  62         }
  63 }
  64
  65
  66 static void ppro_setup_ctrs(struct op_msrs const * const msrs)
  67 {
  68         unsigned int low, high;
  69         int i;
  70
  71         if (!reset_value) {
  72                 reset_value = kmalloc(sizeof(reset_value[0]) * num_counters,
  73                                         GFP_ATOMIC);
  74                 if (!reset_value)
  75                         return;
  76         }
  77
  78         if (cpu_has_arch_perfmon) {
  79                 union cpuid10_eax eax;
  80                 eax.full = cpuid_eax(0xa);
  81                 if (counter_width < eax.split.bit_width)
  82                         counter_width = eax.split.bit_width;
  83         }
  84
  85         /* clear all counters */
  86         for (i = 0 ; i < num_counters; ++i) {
  87                 if (unlikely(!CTRL_IS_RESERVED(msrs, i)))
  88                         continue;
  89                 CTRL_READ(low, high, msrs, i);
  90                 CTRL_CLEAR(low);
  91                 CTRL_WRITE(low, high, msrs, i);
  92         }
  93
  94         /* avoid a false detection of ctr overflows in NMI handler */
  95         for (i = 0; i < num_counters; ++i) {
  96                 if (unlikely(!CTR_IS_RESERVED(msrs, i)))
  97                         continue;
  98                 wrmsrl(msrs->counters[i].addr, -1LL);
  99         }
 100
 101         /* enable active counters */
 102         for (i = 0; i < num_counters; ++i) {
 103                 if ((counter_config[i].enabled) && (CTR_IS_RESERVED(msrs, i))) {
 104                         reset_value[i] = counter_config[i].count;
 105
 106                         wrmsrl(msrs->counters[i].addr, -reset_value[i]);
 107
 108                         CTRL_READ(low, high, msrs, i);
 109                         CTRL_CLEAR(low);
 110                         CTRL_SET_ENABLE(low);
 111                         CTRL_SET_USR(low, counter_config[i].user);
 112                         CTRL_SET_KERN(low, counter_config[i].kernel);
 113                         CTRL_SET_UM(low, counter_config[i].unit_mask);
 114                         CTRL_SET_EVENT(low, counter_config[i].event);
 115                         CTRL_WRITE(low, high, msrs, i);
 116                 } else {
 117                         reset_value[i] = 0;
 118                 }
 119         }
 120 }
 121
 122
 123 static int ppro_check_ctrs(struct pt_regs * const regs,
 124                            struct op_msrs const * const msrs)
 125 {
 126         u64 val;
 127         int i;
 128
 129         for (i = 0 ; i < num_counters; ++i) {
 130                 if (!reset_value[i])
 131                         continue;
 132                 rdmsrl(msrs->counters[i].addr, val);
 133                 if (CTR_OVERFLOWED(val)) {
 134                         oprofile_add_sample(regs, i);
 135                         wrmsrl(msrs->counters[i].addr, -reset_value[i]);
 136                 }
 137         }
 138
 139         /* Only P6 based Pentium M need to re-unmask the apic vector but it
 140          * doesn't hurt other P6 variant */
 141         apic_write(APIC_LVTPC, apic_read(APIC_LVTPC) & ~APIC_LVT_MASKED);
 142
 143         /* We can't work out if we really handled an interrupt. We
 144          * might have caught a *second* counter just after overflowing
 145          * the interrupt for this counter then arrives
 146          * and we don't find a counter that's overflowed, so we
 147          * would return 0 and get dazed + confused. Instead we always
 148          * assume we found an overflow. This sucks.
 149          */
 150         return 1;
 151 }
 152
 153
 154 static void ppro_start(struct op_msrs const * const msrs)
 155 {
 156         unsigned int low, high;
 157         int i;
 158
 159         if (!reset_value)
 160                 return;
 161         for (i = 0; i < num_counters; ++i) {
 162                 if (reset_value[i]) {
 163                         CTRL_READ(low, high, msrs, i);
 164                         CTRL_SET_ACTIVE(low);
 165                         CTRL_WRITE(low, high, msrs, i);
 166                 }
 167         }
 168 }
 169
 170
 171 static void ppro_stop(struct op_msrs const * const msrs)
 172 {
 173         unsigned int low, high;
 174         int i;
 175
 176         if (!reset_value)
 177                 return;
 178         for (i = 0; i < num_counters; ++i) {
 179                 if (!reset_value[i])
 180                         continue;
 181                 CTRL_READ(low, high, msrs, i);
 182                 CTRL_SET_INACTIVE(low);
 183                 CTRL_WRITE(low, high, msrs, i);
 184         }
 185 }
 186
 187 static void ppro_shutdown(struct op_msrs const * const msrs)
 188 {
 189         int i;
 190
 191         for (i = 0 ; i < num_counters ; ++i) {
 192                 if (CTR_IS_RESERVED(msrs, i))
 193                         release_perfctr_nmi(MSR_P6_PERFCTR0 + i);
 194         }
 195         for (i = 0 ; i < num_counters ; ++i) {
 196                 if (CTRL_IS_RESERVED(msrs, i))
 197                         release_evntsel_nmi(MSR_P6_EVNTSEL0 + i);
 198         }
 199         if (reset_value) {
 200                 kfree(reset_value);
 201                 reset_value = NULL;
 202         }
 203 }
 204
 205
 206 struct op_x86_model_spec op_ppro_spec = {
 207         .num_counters           = 2,    /* can be overriden */
 208         .num_controls           = 2,    /* dito */
 209         .fill_in_addresses      = &ppro_fill_in_addresses,
 210         .setup_ctrs             = &ppro_setup_ctrs,
 211         .check_ctrs             = &ppro_check_ctrs,
 212         .start                  = &ppro_start,
 213         .stop                   = &ppro_stop,
 214         .shutdown               = &ppro_shutdown
 215 };
 216
 217 /*
 218  * Architectural performance monitoring.
 219  *
 220  * Newer Intel CPUs (Core1+) have support for architectural
 221  * events described in CPUID 0xA. See the IA32 SDM Vol3b.18 for details.
 222  * The advantage of this is that it can be done without knowing about
 223  * the specific CPU.
 224  */
 225
 226 void arch_perfmon_setup_counters(void)
 227 {
 228         union cpuid10_eax eax;
 229
 230         eax.full = cpuid_eax(0xa);
 231
 232         /* Workaround for BIOS bugs in 6/15. Taken from perfmon2 */
 233         if (eax.split.version_id == 0 && current_cpu_data.x86 == 6 &&
 234                 current_cpu_data.x86_model == 15) {
 235                 eax.split.version_id = 2;
 236                 eax.split.num_counters = 2;
 237                 eax.split.bit_width = 40;
 238         }
 239
 240         num_counters = eax.split.num_counters;
 241
 242         op_arch_perfmon_spec.num_counters = num_counters;
 243         op_arch_perfmon_spec.num_controls = num_counters;
 244         op_ppro_spec.num_counters = num_counters;
 245         op_ppro_spec.num_controls = num_counters;
 246 }
 247
 248 struct op_x86_model_spec op_arch_perfmon_spec = {
 249         /* num_counters/num_controls filled in at runtime */
 250         .fill_in_addresses      = &ppro_fill_in_addresses,
 251         /* user space does the cpuid check for available events */
 252         .setup_ctrs             = &ppro_setup_ctrs,
 253         .check_ctrs             = &ppro_check_ctrs,
 254         .start                  = &ppro_start,
 255         .stop                   = &ppro_stop,
 256         .shutdown               = &ppro_shutdown
 257 };