]> www.pilppa.org Git - linux-2.6-omap-h63xx.git/blob - arch/x86/kernel/setup_64.c
413b8fc3154510089d38288585c38e5d959709c9
[linux-2.6-omap-h63xx.git] / arch / x86 / kernel / setup_64.c
1 /*
2  *  Copyright (C) 1995  Linus Torvalds
3  */
4
5 /*
6  * This file handles the architecture-dependent parts of initialization
7  */
8
9 #include <linux/errno.h>
10 #include <linux/sched.h>
11 #include <linux/kernel.h>
12 #include <linux/mm.h>
13 #include <linux/stddef.h>
14 #include <linux/unistd.h>
15 #include <linux/ptrace.h>
16 #include <linux/slab.h>
17 #include <linux/user.h>
18 #include <linux/screen_info.h>
19 #include <linux/ioport.h>
20 #include <linux/delay.h>
21 #include <linux/init.h>
22 #include <linux/initrd.h>
23 #include <linux/highmem.h>
24 #include <linux/bootmem.h>
25 #include <linux/module.h>
26 #include <asm/processor.h>
27 #include <linux/console.h>
28 #include <linux/seq_file.h>
29 #include <linux/crash_dump.h>
30 #include <linux/root_dev.h>
31 #include <linux/pci.h>
32 #include <linux/efi.h>
33 #include <linux/acpi.h>
34 #include <linux/kallsyms.h>
35 #include <linux/edd.h>
36 #include <linux/mmzone.h>
37 #include <linux/kexec.h>
38 #include <linux/cpufreq.h>
39 #include <linux/dmi.h>
40 #include <linux/dma-mapping.h>
41 #include <linux/ctype.h>
42 #include <linux/uaccess.h>
43 #include <linux/init_ohci1394_dma.h>
44
45 #include <asm/mtrr.h>
46 #include <asm/uaccess.h>
47 #include <asm/system.h>
48 #include <asm/vsyscall.h>
49 #include <asm/io.h>
50 #include <asm/smp.h>
51 #include <asm/msr.h>
52 #include <asm/desc.h>
53 #include <video/edid.h>
54 #include <asm/e820.h>
55 #include <asm/dma.h>
56 #include <asm/gart.h>
57 #include <asm/mpspec.h>
58 #include <asm/mmu_context.h>
59 #include <asm/proto.h>
60 #include <asm/setup.h>
61 #include <asm/mach_apic.h>
62 #include <asm/numa.h>
63 #include <asm/sections.h>
64 #include <asm/dmi.h>
65 #include <asm/cacheflush.h>
66 #include <asm/mce.h>
67 #include <asm/ds.h>
68 #include <asm/topology.h>
69
70 #ifdef CONFIG_PARAVIRT
71 #include <asm/paravirt.h>
72 #else
73 #define ARCH_SETUP
74 #endif
75
76 /*
77  * Machine setup..
78  */
79
80 struct cpuinfo_x86 boot_cpu_data __read_mostly;
81 EXPORT_SYMBOL(boot_cpu_data);
82
83 __u32 cleared_cpu_caps[NCAPINTS] __cpuinitdata;
84
85 unsigned long mmu_cr4_features;
86
87 /* Boot loader ID as an integer, for the benefit of proc_dointvec */
88 int bootloader_type;
89
90 unsigned long saved_video_mode;
91
92 int force_mwait __cpuinitdata;
93
94 /*
95  * Early DMI memory
96  */
97 int dmi_alloc_index;
98 char dmi_alloc_data[DMI_MAX_DATA];
99
100 /*
101  * Setup options
102  */
103 struct screen_info screen_info;
104 EXPORT_SYMBOL(screen_info);
105 struct sys_desc_table_struct {
106         unsigned short length;
107         unsigned char table[0];
108 };
109
110 struct edid_info edid_info;
111 EXPORT_SYMBOL_GPL(edid_info);
112
113 extern int root_mountflags;
114
115 char __initdata command_line[COMMAND_LINE_SIZE];
116
117 struct resource standard_io_resources[] = {
118         { .name = "dma1", .start = 0x00, .end = 0x1f,
119                 .flags = IORESOURCE_BUSY | IORESOURCE_IO },
120         { .name = "pic1", .start = 0x20, .end = 0x21,
121                 .flags = IORESOURCE_BUSY | IORESOURCE_IO },
122         { .name = "timer0", .start = 0x40, .end = 0x43,
123                 .flags = IORESOURCE_BUSY | IORESOURCE_IO },
124         { .name = "timer1", .start = 0x50, .end = 0x53,
125                 .flags = IORESOURCE_BUSY | IORESOURCE_IO },
126         { .name = "keyboard", .start = 0x60, .end = 0x6f,
127                 .flags = IORESOURCE_BUSY | IORESOURCE_IO },
128         { .name = "dma page reg", .start = 0x80, .end = 0x8f,
129                 .flags = IORESOURCE_BUSY | IORESOURCE_IO },
130         { .name = "pic2", .start = 0xa0, .end = 0xa1,
131                 .flags = IORESOURCE_BUSY | IORESOURCE_IO },
132         { .name = "dma2", .start = 0xc0, .end = 0xdf,
133                 .flags = IORESOURCE_BUSY | IORESOURCE_IO },
134         { .name = "fpu", .start = 0xf0, .end = 0xff,
135                 .flags = IORESOURCE_BUSY | IORESOURCE_IO }
136 };
137
138 #define IORESOURCE_RAM (IORESOURCE_BUSY | IORESOURCE_MEM)
139
140 static struct resource data_resource = {
141         .name = "Kernel data",
142         .start = 0,
143         .end = 0,
144         .flags = IORESOURCE_RAM,
145 };
146 static struct resource code_resource = {
147         .name = "Kernel code",
148         .start = 0,
149         .end = 0,
150         .flags = IORESOURCE_RAM,
151 };
152 static struct resource bss_resource = {
153         .name = "Kernel bss",
154         .start = 0,
155         .end = 0,
156         .flags = IORESOURCE_RAM,
157 };
158
159 static void __cpuinit early_identify_cpu(struct cpuinfo_x86 *c);
160
161 #ifdef CONFIG_PROC_VMCORE
162 /* elfcorehdr= specifies the location of elf core header
163  * stored by the crashed kernel. This option will be passed
164  * by kexec loader to the capture kernel.
165  */
166 static int __init setup_elfcorehdr(char *arg)
167 {
168         char *end;
169         if (!arg)
170                 return -EINVAL;
171         elfcorehdr_addr = memparse(arg, &end);
172         return end > arg ? 0 : -EINVAL;
173 }
174 early_param("elfcorehdr", setup_elfcorehdr);
175 #endif
176
177 #ifndef CONFIG_NUMA
178 static void __init
179 contig_initmem_init(unsigned long start_pfn, unsigned long end_pfn)
180 {
181         unsigned long bootmap_size, bootmap;
182
183         bootmap_size = bootmem_bootmap_pages(end_pfn)<<PAGE_SHIFT;
184         bootmap = find_e820_area(0, end_pfn<<PAGE_SHIFT, bootmap_size,
185                                  PAGE_SIZE);
186         if (bootmap == -1L)
187                 panic("Cannot find bootmem map of size %ld\n", bootmap_size);
188         bootmap_size = init_bootmem(bootmap >> PAGE_SHIFT, end_pfn);
189         e820_register_active_regions(0, start_pfn, end_pfn);
190         free_bootmem_with_active_regions(0, end_pfn);
191         reserve_bootmem(bootmap, bootmap_size, BOOTMEM_DEFAULT);
192 }
193 #endif
194
195 #if defined(CONFIG_EDD) || defined(CONFIG_EDD_MODULE)
196 struct edd edd;
197 #ifdef CONFIG_EDD_MODULE
198 EXPORT_SYMBOL(edd);
199 #endif
200 /**
201  * copy_edd() - Copy the BIOS EDD information
202  *              from boot_params into a safe place.
203  *
204  */
205 static inline void copy_edd(void)
206 {
207      memcpy(edd.mbr_signature, boot_params.edd_mbr_sig_buffer,
208             sizeof(edd.mbr_signature));
209      memcpy(edd.edd_info, boot_params.eddbuf, sizeof(edd.edd_info));
210      edd.mbr_signature_nr = boot_params.edd_mbr_sig_buf_entries;
211      edd.edd_info_nr = boot_params.eddbuf_entries;
212 }
213 #else
214 static inline void copy_edd(void)
215 {
216 }
217 #endif
218
219 #ifdef CONFIG_KEXEC
220 static void __init reserve_crashkernel(void)
221 {
222         unsigned long long total_mem;
223         unsigned long long crash_size, crash_base;
224         int ret;
225
226         total_mem = ((unsigned long long)max_low_pfn - min_low_pfn) << PAGE_SHIFT;
227
228         ret = parse_crashkernel(boot_command_line, total_mem,
229                         &crash_size, &crash_base);
230         if (ret == 0 && crash_size) {
231                 if (crash_base <= 0) {
232                         printk(KERN_INFO "crashkernel reservation failed - "
233                                         "you have to specify a base address\n");
234                         return;
235                 }
236
237                 if (reserve_bootmem(crash_base, crash_size,
238                                         BOOTMEM_EXCLUSIVE) < 0) {
239                         printk(KERN_INFO "crashkernel reservation failed - "
240                                         "memory is in use\n");
241                         return;
242                 }
243
244                 printk(KERN_INFO "Reserving %ldMB of memory at %ldMB "
245                                 "for crashkernel (System RAM: %ldMB)\n",
246                                 (unsigned long)(crash_size >> 20),
247                                 (unsigned long)(crash_base >> 20),
248                                 (unsigned long)(total_mem >> 20));
249                 crashk_res.start = crash_base;
250                 crashk_res.end   = crash_base + crash_size - 1;
251                 insert_resource(&iomem_resource, &crashk_res);
252         }
253 }
254 #else
255 static inline void __init reserve_crashkernel(void)
256 {}
257 #endif
258
259 /* Overridden in paravirt.c if CONFIG_PARAVIRT */
260 void __attribute__((weak)) __init memory_setup(void)
261 {
262        machine_specific_memory_setup();
263 }
264
265 /*
266  * setup_arch - architecture-specific boot-time initializations
267  *
268  * Note: On x86_64, fixmaps are ready for use even before this is called.
269  */
270 void __init setup_arch(char **cmdline_p)
271 {
272         unsigned i;
273
274         printk(KERN_INFO "Command line: %s\n", boot_command_line);
275
276         ROOT_DEV = old_decode_dev(boot_params.hdr.root_dev);
277         screen_info = boot_params.screen_info;
278         edid_info = boot_params.edid_info;
279         saved_video_mode = boot_params.hdr.vid_mode;
280         bootloader_type = boot_params.hdr.type_of_loader;
281
282 #ifdef CONFIG_BLK_DEV_RAM
283         rd_image_start = boot_params.hdr.ram_size & RAMDISK_IMAGE_START_MASK;
284         rd_prompt = ((boot_params.hdr.ram_size & RAMDISK_PROMPT_FLAG) != 0);
285         rd_doload = ((boot_params.hdr.ram_size & RAMDISK_LOAD_FLAG) != 0);
286 #endif
287 #ifdef CONFIG_EFI
288         if (!strncmp((char *)&boot_params.efi_info.efi_loader_signature,
289                      "EL64", 4))
290                 efi_enabled = 1;
291 #endif
292
293         ARCH_SETUP
294
295         memory_setup();
296         copy_edd();
297
298         if (!boot_params.hdr.root_flags)
299                 root_mountflags &= ~MS_RDONLY;
300         init_mm.start_code = (unsigned long) &_text;
301         init_mm.end_code = (unsigned long) &_etext;
302         init_mm.end_data = (unsigned long) &_edata;
303         init_mm.brk = (unsigned long) &_end;
304
305         code_resource.start = virt_to_phys(&_text);
306         code_resource.end = virt_to_phys(&_etext)-1;
307         data_resource.start = virt_to_phys(&_etext);
308         data_resource.end = virt_to_phys(&_edata)-1;
309         bss_resource.start = virt_to_phys(&__bss_start);
310         bss_resource.end = virt_to_phys(&__bss_stop)-1;
311
312         early_identify_cpu(&boot_cpu_data);
313
314         strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE);
315         *cmdline_p = command_line;
316
317         parse_early_param();
318
319 #ifdef CONFIG_PROVIDE_OHCI1394_DMA_INIT
320         if (init_ohci1394_dma_early)
321                 init_ohci1394_dma_on_all_controllers();
322 #endif
323
324         finish_e820_parsing();
325
326         /* after parse_early_param, so could debug it */
327         insert_resource(&iomem_resource, &code_resource);
328         insert_resource(&iomem_resource, &data_resource);
329         insert_resource(&iomem_resource, &bss_resource);
330
331         early_gart_iommu_check();
332
333         e820_register_active_regions(0, 0, -1UL);
334         /*
335          * partially used pages are not usable - thus
336          * we are rounding upwards:
337          */
338         end_pfn = e820_end_of_ram();
339         /* update e820 for memory not covered by WB MTRRs */
340         mtrr_bp_init();
341         if (mtrr_trim_uncached_memory(end_pfn)) {
342                 e820_register_active_regions(0, 0, -1UL);
343                 end_pfn = e820_end_of_ram();
344         }
345
346         num_physpages = end_pfn;
347
348         check_efer();
349
350         init_memory_mapping(0, (max_pfn_mapped << PAGE_SHIFT));
351         if (efi_enabled)
352                 efi_init();
353
354         vsmp_init();
355
356         dmi_scan_machine();
357
358         io_delay_init();
359
360 #ifdef CONFIG_SMP
361         /* setup to use the early static init tables during kernel startup */
362         x86_cpu_to_apicid_early_ptr = (void *)x86_cpu_to_apicid_init;
363         x86_bios_cpu_apicid_early_ptr = (void *)x86_bios_cpu_apicid_init;
364 #ifdef CONFIG_NUMA
365         x86_cpu_to_node_map_early_ptr = (void *)x86_cpu_to_node_map_init;
366 #endif
367 #endif
368
369 #ifdef CONFIG_ACPI
370         /*
371          * Initialize the ACPI boot-time table parser (gets the RSDP and SDT).
372          * Call this early for SRAT node setup.
373          */
374         acpi_boot_table_init();
375 #endif
376
377         /* How many end-of-memory variables you have, grandma! */
378         max_low_pfn = end_pfn;
379         max_pfn = end_pfn;
380         high_memory = (void *)__va(end_pfn * PAGE_SIZE - 1) + 1;
381
382         /* Remove active ranges so rediscovery with NUMA-awareness happens */
383         remove_all_active_ranges();
384
385 #ifdef CONFIG_ACPI_NUMA
386         /*
387          * Parse SRAT to discover nodes.
388          */
389         acpi_numa_init();
390 #endif
391
392 #ifdef CONFIG_NUMA
393         numa_initmem_init(0, end_pfn);
394 #else
395         contig_initmem_init(0, end_pfn);
396 #endif
397
398         early_res_to_bootmem();
399
400 #ifdef CONFIG_ACPI_SLEEP
401         /*
402          * Reserve low memory region for sleep support.
403          */
404        acpi_reserve_bootmem();
405 #endif
406
407         if (efi_enabled)
408                 efi_reserve_bootmem();
409
410        /*
411         * Find and reserve possible boot-time SMP configuration:
412         */
413         find_smp_config();
414 #ifdef CONFIG_BLK_DEV_INITRD
415         if (boot_params.hdr.type_of_loader && boot_params.hdr.ramdisk_image) {
416                 unsigned long ramdisk_image = boot_params.hdr.ramdisk_image;
417                 unsigned long ramdisk_size  = boot_params.hdr.ramdisk_size;
418                 unsigned long ramdisk_end   = ramdisk_image + ramdisk_size;
419                 unsigned long end_of_mem    = end_pfn << PAGE_SHIFT;
420
421                 if (ramdisk_end <= end_of_mem) {
422                         reserve_bootmem_generic(ramdisk_image, ramdisk_size);
423                         initrd_start = ramdisk_image + PAGE_OFFSET;
424                         initrd_end = initrd_start+ramdisk_size;
425                 } else {
426                         /* Assumes everything on node 0 */
427                         free_bootmem(ramdisk_image, ramdisk_size);
428                         printk(KERN_ERR "initrd extends beyond end of memory "
429                                "(0x%08lx > 0x%08lx)\ndisabling initrd\n",
430                                ramdisk_end, end_of_mem);
431                         initrd_start = 0;
432                 }
433         }
434 #endif
435         reserve_crashkernel();
436         paging_init();
437         map_vsyscall();
438
439         early_quirks();
440
441 #ifdef CONFIG_ACPI
442         /*
443          * Read APIC and some other early information from ACPI tables.
444          */
445         acpi_boot_init();
446 #endif
447
448         init_cpu_to_node();
449
450         /*
451          * get boot-time SMP configuration:
452          */
453         if (smp_found_config)
454                 get_smp_config();
455         init_apic_mappings();
456         ioapic_init_mappings();
457
458         /*
459          * We trust e820 completely. No explicit ROM probing in memory.
460          */
461         e820_reserve_resources();
462         e820_mark_nosave_regions();
463
464         /* request I/O space for devices used on all i[345]86 PCs */
465         for (i = 0; i < ARRAY_SIZE(standard_io_resources); i++)
466                 request_resource(&ioport_resource, &standard_io_resources[i]);
467
468         e820_setup_gap();
469
470 #ifdef CONFIG_VT
471 #if defined(CONFIG_VGA_CONSOLE)
472         if (!efi_enabled || (efi_mem_type(0xa0000) != EFI_CONVENTIONAL_MEMORY))
473                 conswitchp = &vga_con;
474 #elif defined(CONFIG_DUMMY_CONSOLE)
475         conswitchp = &dummy_con;
476 #endif
477 #endif
478 }
479
480 static int __cpuinit get_model_name(struct cpuinfo_x86 *c)
481 {
482         unsigned int *v;
483
484         if (c->extended_cpuid_level < 0x80000004)
485                 return 0;
486
487         v = (unsigned int *) c->x86_model_id;
488         cpuid(0x80000002, &v[0], &v[1], &v[2], &v[3]);
489         cpuid(0x80000003, &v[4], &v[5], &v[6], &v[7]);
490         cpuid(0x80000004, &v[8], &v[9], &v[10], &v[11]);
491         c->x86_model_id[48] = 0;
492         return 1;
493 }
494
495
496 static void __cpuinit display_cacheinfo(struct cpuinfo_x86 *c)
497 {
498         unsigned int n, dummy, eax, ebx, ecx, edx;
499
500         n = c->extended_cpuid_level;
501
502         if (n >= 0x80000005) {
503                 cpuid(0x80000005, &dummy, &ebx, &ecx, &edx);
504                 printk(KERN_INFO "CPU: L1 I Cache: %dK (%d bytes/line), "
505                        "D cache %dK (%d bytes/line)\n",
506                        edx>>24, edx&0xFF, ecx>>24, ecx&0xFF);
507                 c->x86_cache_size = (ecx>>24) + (edx>>24);
508                 /* On K8 L1 TLB is inclusive, so don't count it */
509                 c->x86_tlbsize = 0;
510         }
511
512         if (n >= 0x80000006) {
513                 cpuid(0x80000006, &dummy, &ebx, &ecx, &edx);
514                 ecx = cpuid_ecx(0x80000006);
515                 c->x86_cache_size = ecx >> 16;
516                 c->x86_tlbsize += ((ebx >> 16) & 0xfff) + (ebx & 0xfff);
517
518                 printk(KERN_INFO "CPU: L2 Cache: %dK (%d bytes/line)\n",
519                 c->x86_cache_size, ecx & 0xFF);
520         }
521         if (n >= 0x80000008) {
522                 cpuid(0x80000008, &eax, &dummy, &dummy, &dummy);
523                 c->x86_virt_bits = (eax >> 8) & 0xff;
524                 c->x86_phys_bits = eax & 0xff;
525         }
526 }
527
528 #ifdef CONFIG_NUMA
529 static int __cpuinit nearby_node(int apicid)
530 {
531         int i, node;
532
533         for (i = apicid - 1; i >= 0; i--) {
534                 node = apicid_to_node[i];
535                 if (node != NUMA_NO_NODE && node_online(node))
536                         return node;
537         }
538         for (i = apicid + 1; i < MAX_LOCAL_APIC; i++) {
539                 node = apicid_to_node[i];
540                 if (node != NUMA_NO_NODE && node_online(node))
541                         return node;
542         }
543         return first_node(node_online_map); /* Shouldn't happen */
544 }
545 #endif
546
547 /*
548  * On a AMD dual core setup the lower bits of the APIC id distingush the cores.
549  * Assumes number of cores is a power of two.
550  */
551 static void __cpuinit amd_detect_cmp(struct cpuinfo_x86 *c)
552 {
553 #ifdef CONFIG_SMP
554         unsigned bits;
555 #ifdef CONFIG_NUMA
556         int cpu = smp_processor_id();
557         int node = 0;
558         unsigned apicid = hard_smp_processor_id();
559 #endif
560         bits = c->x86_coreid_bits;
561
562         /* Low order bits define the core id (index of core in socket) */
563         c->cpu_core_id = c->initial_apicid & ((1 << bits)-1);
564         /* Convert the initial APIC ID into the socket ID */
565         c->phys_proc_id = c->initial_apicid >> bits;
566
567 #ifdef CONFIG_NUMA
568         node = c->phys_proc_id;
569         if (apicid_to_node[apicid] != NUMA_NO_NODE)
570                 node = apicid_to_node[apicid];
571         if (!node_online(node)) {
572                 /* Two possibilities here:
573                    - The CPU is missing memory and no node was created.
574                    In that case try picking one from a nearby CPU
575                    - The APIC IDs differ from the HyperTransport node IDs
576                    which the K8 northbridge parsing fills in.
577                    Assume they are all increased by a constant offset,
578                    but in the same order as the HT nodeids.
579                    If that doesn't result in a usable node fall back to the
580                    path for the previous case.  */
581
582                 int ht_nodeid = c->initial_apicid;
583
584                 if (ht_nodeid >= 0 &&
585                     apicid_to_node[ht_nodeid] != NUMA_NO_NODE)
586                         node = apicid_to_node[ht_nodeid];
587                 /* Pick a nearby node */
588                 if (!node_online(node))
589                         node = nearby_node(apicid);
590         }
591         numa_set_node(cpu, node);
592
593         printk(KERN_INFO "CPU %d/%x -> Node %d\n", cpu, apicid, node);
594 #endif
595 #endif
596 }
597
598 static void __cpuinit early_init_amd_mc(struct cpuinfo_x86 *c)
599 {
600 #ifdef CONFIG_SMP
601         unsigned bits, ecx;
602
603         /* Multi core CPU? */
604         if (c->extended_cpuid_level < 0x80000008)
605                 return;
606
607         ecx = cpuid_ecx(0x80000008);
608
609         c->x86_max_cores = (ecx & 0xff) + 1;
610
611         /* CPU telling us the core id bits shift? */
612         bits = (ecx >> 12) & 0xF;
613
614         /* Otherwise recompute */
615         if (bits == 0) {
616                 while ((1 << bits) < c->x86_max_cores)
617                         bits++;
618         }
619
620         c->x86_coreid_bits = bits;
621
622 #endif
623 }
624
625 #define ENABLE_C1E_MASK         0x18000000
626 #define CPUID_PROCESSOR_SIGNATURE       1
627 #define CPUID_XFAM              0x0ff00000
628 #define CPUID_XFAM_K8           0x00000000
629 #define CPUID_XFAM_10H          0x00100000
630 #define CPUID_XFAM_11H          0x00200000
631 #define CPUID_XMOD              0x000f0000
632 #define CPUID_XMOD_REV_F        0x00040000
633
634 /* AMD systems with C1E don't have a working lAPIC timer. Check for that. */
635 static __cpuinit int amd_apic_timer_broken(void)
636 {
637         u32 lo, hi, eax = cpuid_eax(CPUID_PROCESSOR_SIGNATURE);
638
639         switch (eax & CPUID_XFAM) {
640         case CPUID_XFAM_K8:
641                 if ((eax & CPUID_XMOD) < CPUID_XMOD_REV_F)
642                         break;
643         case CPUID_XFAM_10H:
644         case CPUID_XFAM_11H:
645                 rdmsr(MSR_K8_ENABLE_C1E, lo, hi);
646                 if (lo & ENABLE_C1E_MASK)
647                         return 1;
648                 break;
649         default:
650                 /* err on the side of caution */
651                 return 1;
652         }
653         return 0;
654 }
655
656 static void __cpuinit early_init_amd(struct cpuinfo_x86 *c)
657 {
658         early_init_amd_mc(c);
659
660         /* c->x86_power is 8000_0007 edx. Bit 8 is constant TSC */
661         if (c->x86_power & (1<<8))
662                 set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);
663 }
664
665 static void __cpuinit init_amd(struct cpuinfo_x86 *c)
666 {
667         unsigned level;
668
669 #ifdef CONFIG_SMP
670         unsigned long value;
671
672         /*
673          * Disable TLB flush filter by setting HWCR.FFDIS on K8
674          * bit 6 of msr C001_0015
675          *
676          * Errata 63 for SH-B3 steppings
677          * Errata 122 for all steppings (F+ have it disabled by default)
678          */
679         if (c->x86 == 15) {
680                 rdmsrl(MSR_K8_HWCR, value);
681                 value |= 1 << 6;
682                 wrmsrl(MSR_K8_HWCR, value);
683         }
684 #endif
685
686         /* Bit 31 in normal CPUID used for nonstandard 3DNow ID;
687            3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway */
688         clear_cpu_cap(c, 0*32+31);
689
690         /* On C+ stepping K8 rep microcode works well for copy/memset */
691         level = cpuid_eax(1);
692         if (c->x86 == 15 && ((level >= 0x0f48 && level < 0x0f50) ||
693                              level >= 0x0f58))
694                 set_cpu_cap(c, X86_FEATURE_REP_GOOD);
695         if (c->x86 == 0x10 || c->x86 == 0x11)
696                 set_cpu_cap(c, X86_FEATURE_REP_GOOD);
697
698         /* Enable workaround for FXSAVE leak */
699         if (c->x86 >= 6)
700                 set_cpu_cap(c, X86_FEATURE_FXSAVE_LEAK);
701
702         level = get_model_name(c);
703         if (!level) {
704                 switch (c->x86) {
705                 case 15:
706                         /* Should distinguish Models here, but this is only
707                            a fallback anyways. */
708                         strcpy(c->x86_model_id, "Hammer");
709                         break;
710                 }
711         }
712         display_cacheinfo(c);
713
714         /* Multi core CPU? */
715         if (c->extended_cpuid_level >= 0x80000008)
716                 amd_detect_cmp(c);
717
718         if (c->extended_cpuid_level >= 0x80000006 &&
719                 (cpuid_edx(0x80000006) & 0xf000))
720                 num_cache_leaves = 4;
721         else
722                 num_cache_leaves = 3;
723
724         if (c->x86 == 0xf || c->x86 == 0x10 || c->x86 == 0x11)
725                 set_cpu_cap(c, X86_FEATURE_K8);
726
727         /* MFENCE stops RDTSC speculation */
728         set_cpu_cap(c, X86_FEATURE_MFENCE_RDTSC);
729
730         if (amd_apic_timer_broken())
731                 disable_apic_timer = 1;
732 }
733
734 void __cpuinit detect_ht(struct cpuinfo_x86 *c)
735 {
736 #ifdef CONFIG_SMP
737         u32 eax, ebx, ecx, edx;
738         int index_msb, core_bits;
739
740         cpuid(1, &eax, &ebx, &ecx, &edx);
741
742
743         if (!cpu_has(c, X86_FEATURE_HT))
744                 return;
745         if (cpu_has(c, X86_FEATURE_CMP_LEGACY))
746                 goto out;
747
748         smp_num_siblings = (ebx & 0xff0000) >> 16;
749
750         if (smp_num_siblings == 1) {
751                 printk(KERN_INFO  "CPU: Hyper-Threading is disabled\n");
752         } else if (smp_num_siblings > 1) {
753
754                 if (smp_num_siblings > NR_CPUS) {
755                         printk(KERN_WARNING "CPU: Unsupported number of "
756                                "siblings %d", smp_num_siblings);
757                         smp_num_siblings = 1;
758                         return;
759                 }
760
761                 index_msb = get_count_order(smp_num_siblings);
762                 c->phys_proc_id = phys_pkg_id(index_msb);
763
764                 smp_num_siblings = smp_num_siblings / c->x86_max_cores;
765
766                 index_msb = get_count_order(smp_num_siblings);
767
768                 core_bits = get_count_order(c->x86_max_cores);
769
770                 c->cpu_core_id = phys_pkg_id(index_msb) &
771                                                ((1 << core_bits) - 1);
772         }
773 out:
774         if ((c->x86_max_cores * smp_num_siblings) > 1) {
775                 printk(KERN_INFO  "CPU: Physical Processor ID: %d\n",
776                        c->phys_proc_id);
777                 printk(KERN_INFO  "CPU: Processor Core ID: %d\n",
778                        c->cpu_core_id);
779         }
780
781 #endif
782 }
783
784 /*
785  * find out the number of processor cores on the die
786  */
787 static int __cpuinit intel_num_cpu_cores(struct cpuinfo_x86 *c)
788 {
789         unsigned int eax, t;
790
791         if (c->cpuid_level < 4)
792                 return 1;
793
794         cpuid_count(4, 0, &eax, &t, &t, &t);
795
796         if (eax & 0x1f)
797                 return ((eax >> 26) + 1);
798         else
799                 return 1;
800 }
801
802 static void __cpuinit srat_detect_node(void)
803 {
804 #ifdef CONFIG_NUMA
805         unsigned node;
806         int cpu = smp_processor_id();
807         int apicid = hard_smp_processor_id();
808
809         /* Don't do the funky fallback heuristics the AMD version employs
810            for now. */
811         node = apicid_to_node[apicid];
812         if (node == NUMA_NO_NODE || !node_online(node))
813                 node = first_node(node_online_map);
814         numa_set_node(cpu, node);
815
816         printk(KERN_INFO "CPU %d/%x -> Node %d\n", cpu, apicid, node);
817 #endif
818 }
819
820 static void __cpuinit early_init_intel(struct cpuinfo_x86 *c)
821 {
822         if ((c->x86 == 0xf && c->x86_model >= 0x03) ||
823             (c->x86 == 0x6 && c->x86_model >= 0x0e))
824                 set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);
825 }
826
827 static void __cpuinit init_intel(struct cpuinfo_x86 *c)
828 {
829         /* Cache sizes */
830         unsigned n;
831
832         init_intel_cacheinfo(c);
833         if (c->cpuid_level > 9) {
834                 unsigned eax = cpuid_eax(10);
835                 /* Check for version and the number of counters */
836                 if ((eax & 0xff) && (((eax>>8) & 0xff) > 1))
837                         set_cpu_cap(c, X86_FEATURE_ARCH_PERFMON);
838         }
839
840         if (cpu_has_ds) {
841                 unsigned int l1, l2;
842                 rdmsr(MSR_IA32_MISC_ENABLE, l1, l2);
843                 if (!(l1 & (1<<11)))
844                         set_cpu_cap(c, X86_FEATURE_BTS);
845                 if (!(l1 & (1<<12)))
846                         set_cpu_cap(c, X86_FEATURE_PEBS);
847         }
848
849
850         if (cpu_has_bts)
851                 ds_init_intel(c);
852
853         n = c->extended_cpuid_level;
854         if (n >= 0x80000008) {
855                 unsigned eax = cpuid_eax(0x80000008);
856                 c->x86_virt_bits = (eax >> 8) & 0xff;
857                 c->x86_phys_bits = eax & 0xff;
858                 /* CPUID workaround for Intel 0F34 CPU */
859                 if (c->x86_vendor == X86_VENDOR_INTEL &&
860                     c->x86 == 0xF && c->x86_model == 0x3 &&
861                     c->x86_mask == 0x4)
862                         c->x86_phys_bits = 36;
863         }
864
865         if (c->x86 == 15)
866                 c->x86_cache_alignment = c->x86_clflush_size * 2;
867         if (c->x86 == 6)
868                 set_cpu_cap(c, X86_FEATURE_REP_GOOD);
869         set_cpu_cap(c, X86_FEATURE_LFENCE_RDTSC);
870         c->x86_max_cores = intel_num_cpu_cores(c);
871
872         srat_detect_node();
873 }
874
875 static void __cpuinit get_cpu_vendor(struct cpuinfo_x86 *c)
876 {
877         char *v = c->x86_vendor_id;
878
879         if (!strcmp(v, "AuthenticAMD"))
880                 c->x86_vendor = X86_VENDOR_AMD;
881         else if (!strcmp(v, "GenuineIntel"))
882                 c->x86_vendor = X86_VENDOR_INTEL;
883         else
884                 c->x86_vendor = X86_VENDOR_UNKNOWN;
885 }
886
887 /* Do some early cpuid on the boot CPU to get some parameter that are
888    needed before check_bugs. Everything advanced is in identify_cpu
889    below. */
890 static void __cpuinit early_identify_cpu(struct cpuinfo_x86 *c)
891 {
892         u32 tfms, xlvl;
893
894         c->loops_per_jiffy = loops_per_jiffy;
895         c->x86_cache_size = -1;
896         c->x86_vendor = X86_VENDOR_UNKNOWN;
897         c->x86_model = c->x86_mask = 0; /* So far unknown... */
898         c->x86_vendor_id[0] = '\0'; /* Unset */
899         c->x86_model_id[0] = '\0';  /* Unset */
900         c->x86_clflush_size = 64;
901         c->x86_cache_alignment = c->x86_clflush_size;
902         c->x86_max_cores = 1;
903         c->x86_coreid_bits = 0;
904         c->extended_cpuid_level = 0;
905         memset(&c->x86_capability, 0, sizeof c->x86_capability);
906
907         /* Get vendor name */
908         cpuid(0x00000000, (unsigned int *)&c->cpuid_level,
909               (unsigned int *)&c->x86_vendor_id[0],
910               (unsigned int *)&c->x86_vendor_id[8],
911               (unsigned int *)&c->x86_vendor_id[4]);
912
913         get_cpu_vendor(c);
914
915         /* Initialize the standard set of capabilities */
916         /* Note that the vendor-specific code below might override */
917
918         /* Intel-defined flags: level 0x00000001 */
919         if (c->cpuid_level >= 0x00000001) {
920                 __u32 misc;
921                 cpuid(0x00000001, &tfms, &misc, &c->x86_capability[4],
922                       &c->x86_capability[0]);
923                 c->x86 = (tfms >> 8) & 0xf;
924                 c->x86_model = (tfms >> 4) & 0xf;
925                 c->x86_mask = tfms & 0xf;
926                 if (c->x86 == 0xf)
927                         c->x86 += (tfms >> 20) & 0xff;
928                 if (c->x86 >= 0x6)
929                         c->x86_model += ((tfms >> 16) & 0xF) << 4;
930                 if (test_cpu_cap(c, X86_FEATURE_CLFLSH))
931                         c->x86_clflush_size = ((misc >> 8) & 0xff) * 8;
932         } else {
933                 /* Have CPUID level 0 only - unheard of */
934                 c->x86 = 4;
935         }
936
937         c->initial_apicid = (cpuid_ebx(1) >> 24) & 0xff;
938 #ifdef CONFIG_SMP
939         c->phys_proc_id = c->initial_apicid;
940 #endif
941         /* AMD-defined flags: level 0x80000001 */
942         xlvl = cpuid_eax(0x80000000);
943         c->extended_cpuid_level = xlvl;
944         if ((xlvl & 0xffff0000) == 0x80000000) {
945                 if (xlvl >= 0x80000001) {
946                         c->x86_capability[1] = cpuid_edx(0x80000001);
947                         c->x86_capability[6] = cpuid_ecx(0x80000001);
948                 }
949                 if (xlvl >= 0x80000004)
950                         get_model_name(c); /* Default name */
951         }
952
953         /* Transmeta-defined flags: level 0x80860001 */
954         xlvl = cpuid_eax(0x80860000);
955         if ((xlvl & 0xffff0000) == 0x80860000) {
956                 /* Don't set x86_cpuid_level here for now to not confuse. */
957                 if (xlvl >= 0x80860001)
958                         c->x86_capability[2] = cpuid_edx(0x80860001);
959         }
960
961         c->extended_cpuid_level = cpuid_eax(0x80000000);
962         if (c->extended_cpuid_level >= 0x80000007)
963                 c->x86_power = cpuid_edx(0x80000007);
964
965
966         clear_cpu_cap(c, X86_FEATURE_PAT);
967
968         switch (c->x86_vendor) {
969         case X86_VENDOR_AMD:
970                 early_init_amd(c);
971                 if (c->x86 >= 0xf && c->x86 <= 0x11)
972                         set_cpu_cap(c, X86_FEATURE_PAT);
973                 break;
974         case X86_VENDOR_INTEL:
975                 early_init_intel(c);
976                 if (c->x86 == 0xF || (c->x86 == 6 && c->x86_model >= 15))
977                         set_cpu_cap(c, X86_FEATURE_PAT);
978                 break;
979         }
980
981 }
982
983 /*
984  * This does the hard work of actually picking apart the CPU stuff...
985  */
986 void __cpuinit identify_cpu(struct cpuinfo_x86 *c)
987 {
988         int i;
989
990         early_identify_cpu(c);
991
992         init_scattered_cpuid_features(c);
993
994         c->apicid = phys_pkg_id(0);
995
996         /*
997          * Vendor-specific initialization.  In this section we
998          * canonicalize the feature flags, meaning if there are
999          * features a certain CPU supports which CPUID doesn't
1000          * tell us, CPUID claiming incorrect flags, or other bugs,
1001          * we handle them here.
1002          *
1003          * At the end of this section, c->x86_capability better
1004          * indicate the features this CPU genuinely supports!
1005          */
1006         switch (c->x86_vendor) {
1007         case X86_VENDOR_AMD:
1008                 init_amd(c);
1009                 break;
1010
1011         case X86_VENDOR_INTEL:
1012                 init_intel(c);
1013                 break;
1014
1015         case X86_VENDOR_UNKNOWN:
1016         default:
1017                 display_cacheinfo(c);
1018                 break;
1019         }
1020
1021         detect_ht(c);
1022
1023         /*
1024          * On SMP, boot_cpu_data holds the common feature set between
1025          * all CPUs; so make sure that we indicate which features are
1026          * common between the CPUs.  The first time this routine gets
1027          * executed, c == &boot_cpu_data.
1028          */
1029         if (c != &boot_cpu_data) {
1030                 /* AND the already accumulated flags with these */
1031                 for (i = 0; i < NCAPINTS; i++)
1032                         boot_cpu_data.x86_capability[i] &= c->x86_capability[i];
1033         }
1034
1035         /* Clear all flags overriden by options */
1036         for (i = 0; i < NCAPINTS; i++)
1037                 c->x86_capability[i] &= ~cleared_cpu_caps[i];
1038
1039 #ifdef CONFIG_X86_MCE
1040         mcheck_init(c);
1041 #endif
1042         select_idle_routine(c);
1043
1044 #ifdef CONFIG_NUMA
1045         numa_add_cpu(smp_processor_id());
1046 #endif
1047
1048 }
1049
1050 void __cpuinit identify_boot_cpu(void)
1051 {
1052         identify_cpu(&boot_cpu_data);
1053 }
1054
1055 void __cpuinit identify_secondary_cpu(struct cpuinfo_x86 *c)
1056 {
1057         BUG_ON(c == &boot_cpu_data);
1058         identify_cpu(c);
1059         mtrr_ap_init();
1060 }
1061
1062 static __init int setup_noclflush(char *arg)
1063 {
1064         setup_clear_cpu_cap(X86_FEATURE_CLFLSH);
1065         return 1;
1066 }
1067 __setup("noclflush", setup_noclflush);
1068
1069 void __cpuinit print_cpu_info(struct cpuinfo_x86 *c)
1070 {
1071         if (c->x86_model_id[0])
1072                 printk(KERN_CONT "%s", c->x86_model_id);
1073
1074         if (c->x86_mask || c->cpuid_level >= 0)
1075                 printk(KERN_CONT " stepping %02x\n", c->x86_mask);
1076         else
1077                 printk(KERN_CONT "\n");
1078 }
1079
1080 static __init int setup_disablecpuid(char *arg)
1081 {
1082         int bit;
1083         if (get_option(&arg, &bit) && bit < NCAPINTS*32)
1084                 setup_clear_cpu_cap(bit);
1085         else
1086                 return 0;
1087         return 1;
1088 }
1089 __setup("clearcpuid=", setup_disablecpuid);