]> www.pilppa.org Git - linux-2.6-omap-h63xx.git/blob - arch/x86/kernel/early-quirks.c
Merge branch 'linux-next' of git://git.infradead.org/~dedekind/ubi-2.6
[linux-2.6-omap-h63xx.git] / arch / x86 / kernel / early-quirks.c
1 /* Various workarounds for chipset bugs.
2    This code runs very early and can't use the regular PCI subsystem
3    The entries are keyed to PCI bridges which usually identify chipsets
4    uniquely.
5    This is only for whole classes of chipsets with specific problems which
6    need early invasive action (e.g. before the timers are initialized).
7    Most PCI device specific workarounds can be done later and should be
8    in standard PCI quirks
9    Mainboard specific bugs should be handled by DMI entries.
10    CPU specific bugs in setup.c */
11
12 #include <linux/pci.h>
13 #include <linux/acpi.h>
14 #include <linux/pci_ids.h>
15 #include <asm/pci-direct.h>
16 #include <asm/dma.h>
17 #include <asm/io_apic.h>
18 #include <asm/apic.h>
19 #include <asm/iommu.h>
20
21 static void __init fix_hypertransport_config(int num, int slot, int func)
22 {
23         u32 htcfg;
24         /*
25          * we found a hypertransport bus
26          * make sure that we are broadcasting
27          * interrupts to all cpus on the ht bus
28          * if we're using extended apic ids
29          */
30         htcfg = read_pci_config(num, slot, func, 0x68);
31         if (htcfg & (1 << 18)) {
32                 printk(KERN_INFO "Detected use of extended apic ids "
33                                  "on hypertransport bus\n");
34                 if ((htcfg & (1 << 17)) == 0) {
35                         printk(KERN_INFO "Enabling hypertransport extended "
36                                          "apic interrupt broadcast\n");
37                         printk(KERN_INFO "Note this is a bios bug, "
38                                          "please contact your hw vendor\n");
39                         htcfg |= (1 << 17);
40                         write_pci_config(num, slot, func, 0x68, htcfg);
41                 }
42         }
43
44
45 }
46
47 static void __init via_bugs(int  num, int slot, int func)
48 {
49 #ifdef CONFIG_GART_IOMMU
50         if ((max_pfn > MAX_DMA32_PFN ||  force_iommu) &&
51             !gart_iommu_aperture_allowed) {
52                 printk(KERN_INFO
53                        "Looks like a VIA chipset. Disabling IOMMU."
54                        " Override with iommu=allowed\n");
55                 gart_iommu_aperture_disabled = 1;
56         }
57 #endif
58 }
59
60 #ifdef CONFIG_ACPI
61 #ifdef CONFIG_X86_IO_APIC
62
63 static int __init nvidia_hpet_check(struct acpi_table_header *header)
64 {
65         return 0;
66 }
67 #endif /* CONFIG_X86_IO_APIC */
68 #endif /* CONFIG_ACPI */
69
70 static void __init nvidia_bugs(int num, int slot, int func)
71 {
72 #ifdef CONFIG_ACPI
73 #ifdef CONFIG_X86_IO_APIC
74         /*
75          * All timer overrides on Nvidia are
76          * wrong unless HPET is enabled.
77          * Unfortunately that's not true on many Asus boards.
78          * We don't know yet how to detect this automatically, but
79          * at least allow a command line override.
80          */
81         if (acpi_use_timer_override)
82                 return;
83
84         if (acpi_table_parse(ACPI_SIG_HPET, nvidia_hpet_check)) {
85                 acpi_skip_timer_override = 1;
86                 printk(KERN_INFO "Nvidia board "
87                        "detected. Ignoring ACPI "
88                        "timer override.\n");
89                 printk(KERN_INFO "If you got timer trouble "
90                         "try acpi_use_timer_override\n");
91         }
92 #endif
93 #endif
94         /* RED-PEN skip them on mptables too? */
95
96 }
97
98 #if defined(CONFIG_ACPI) && defined(CONFIG_X86_IO_APIC)
99 static u32 __init ati_ixp4x0_rev(int num, int slot, int func)
100 {
101         u32 d;
102         u8  b;
103
104         b = read_pci_config_byte(num, slot, func, 0xac);
105         b &= ~(1<<5);
106         write_pci_config_byte(num, slot, func, 0xac, b);
107
108         d = read_pci_config(num, slot, func, 0x70);
109         d |= 1<<8;
110         write_pci_config(num, slot, func, 0x70, d);
111
112         d = read_pci_config(num, slot, func, 0x8);
113         d &= 0xff;
114         return d;
115 }
116
117 static void __init ati_bugs(int num, int slot, int func)
118 {
119         u32 d;
120         u8  b;
121
122         if (acpi_use_timer_override)
123                 return;
124
125         d = ati_ixp4x0_rev(num, slot, func);
126         if (d  < 0x82)
127                 acpi_skip_timer_override = 1;
128         else {
129                 /* check for IRQ0 interrupt swap */
130                 outb(0x72, 0xcd6); b = inb(0xcd7);
131                 if (!(b & 0x2))
132                         acpi_skip_timer_override = 1;
133         }
134
135         if (acpi_skip_timer_override) {
136                 printk(KERN_INFO "SB4X0 revision 0x%x\n", d);
137                 printk(KERN_INFO "Ignoring ACPI timer override.\n");
138                 printk(KERN_INFO "If you got timer trouble "
139                        "try acpi_use_timer_override\n");
140         }
141 }
142
143 static u32 __init ati_sbx00_rev(int num, int slot, int func)
144 {
145         u32 old, d;
146
147         d = read_pci_config(num, slot, func, 0x70);
148         old = d;
149         d &= ~(1<<8);
150         write_pci_config(num, slot, func, 0x70, d);
151         d = read_pci_config(num, slot, func, 0x8);
152         d &= 0xff;
153         write_pci_config(num, slot, func, 0x70, old);
154
155         return d;
156 }
157
158 static void __init ati_bugs_contd(int num, int slot, int func)
159 {
160         u32 d, rev;
161
162         if (acpi_use_timer_override)
163                 return;
164
165         rev = ati_sbx00_rev(num, slot, func);
166         if (rev > 0x13)
167                 return;
168
169         /* check for IRQ0 interrupt swap */
170         d = read_pci_config(num, slot, func, 0x64);
171         if (!(d & (1<<14)))
172                 acpi_skip_timer_override = 1;
173
174         if (acpi_skip_timer_override) {
175                 printk(KERN_INFO "SB600 revision 0x%x\n", rev);
176                 printk(KERN_INFO "Ignoring ACPI timer override.\n");
177                 printk(KERN_INFO "If you got timer trouble "
178                        "try acpi_use_timer_override\n");
179         }
180 }
181 #else
182 static void __init ati_bugs(int num, int slot, int func)
183 {
184 }
185
186 static void __init ati_bugs_contd(int num, int slot, int func)
187 {
188 }
189 #endif
190
191 #define QFLAG_APPLY_ONCE        0x1
192 #define QFLAG_APPLIED           0x2
193 #define QFLAG_DONE              (QFLAG_APPLY_ONCE|QFLAG_APPLIED)
194 struct chipset {
195         u32 vendor;
196         u32 device;
197         u32 class;
198         u32 class_mask;
199         u32 flags;
200         void (*f)(int num, int slot, int func);
201 };
202
203 static struct chipset early_qrk[] __initdata = {
204         { PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID,
205           PCI_CLASS_BRIDGE_PCI, PCI_ANY_ID, QFLAG_APPLY_ONCE, nvidia_bugs },
206         { PCI_VENDOR_ID_VIA, PCI_ANY_ID,
207           PCI_CLASS_BRIDGE_PCI, PCI_ANY_ID, QFLAG_APPLY_ONCE, via_bugs },
208         { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_K8_NB,
209           PCI_CLASS_BRIDGE_HOST, PCI_ANY_ID, 0, fix_hypertransport_config },
210         { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP400_SMBUS,
211           PCI_CLASS_SERIAL_SMBUS, PCI_ANY_ID, 0, ati_bugs },
212         { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS,
213           PCI_CLASS_SERIAL_SMBUS, PCI_ANY_ID, 0, ati_bugs_contd },
214         {}
215 };
216
217 /**
218  * check_dev_quirk - apply early quirks to a given PCI device
219  * @num: bus number
220  * @slot: slot number
221  * @func: PCI function
222  *
223  * Check the vendor & device ID against the early quirks table.
224  *
225  * If the device is single function, let early_quirks() know so we don't
226  * poke at this device again.
227  */
228 static int __init check_dev_quirk(int num, int slot, int func)
229 {
230         u16 class;
231         u16 vendor;
232         u16 device;
233         u8 type;
234         int i;
235
236         class = read_pci_config_16(num, slot, func, PCI_CLASS_DEVICE);
237
238         if (class == 0xffff)
239                 return -1; /* no class, treat as single function */
240
241         vendor = read_pci_config_16(num, slot, func, PCI_VENDOR_ID);
242
243         device = read_pci_config_16(num, slot, func, PCI_DEVICE_ID);
244
245         for (i = 0; early_qrk[i].f != NULL; i++) {
246                 if (((early_qrk[i].vendor == PCI_ANY_ID) ||
247                         (early_qrk[i].vendor == vendor)) &&
248                         ((early_qrk[i].device == PCI_ANY_ID) ||
249                         (early_qrk[i].device == device)) &&
250                         (!((early_qrk[i].class ^ class) &
251                             early_qrk[i].class_mask))) {
252                                 if ((early_qrk[i].flags &
253                                      QFLAG_DONE) != QFLAG_DONE)
254                                         early_qrk[i].f(num, slot, func);
255                                 early_qrk[i].flags |= QFLAG_APPLIED;
256                         }
257         }
258
259         type = read_pci_config_byte(num, slot, func,
260                                     PCI_HEADER_TYPE);
261         if (!(type & 0x80))
262                 return -1;
263
264         return 0;
265 }
266
267 void __init early_quirks(void)
268 {
269         int num, slot, func;
270
271         if (!early_pci_allowed())
272                 return;
273
274         /* Poor man's PCI discovery */
275         for (num = 0; num < 32; num++)
276                 for (slot = 0; slot < 32; slot++)
277                         for (func = 0; func < 8; func++) {
278                                 /* Only probe function 0 on single fn devices */
279                                 if (check_dev_quirk(num, slot, func))
280                                         break;
281                         }
282 }