2 * boot.c - Architecture-Specific Low-Level ACPI Boot Support
4 * Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
5 * Copyright (C) 2001 Jun Nakajima <jun.nakajima@intel.com>
7 * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License as published by
11 * the Free Software Foundation; either version 2 of the License, or
12 * (at your option) any later version.
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
19 * You should have received a copy of the GNU General Public License
20 * along with this program; if not, write to the Free Software
21 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
23 * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
26 #include <linux/init.h>
27 #include <linux/acpi.h>
28 #include <linux/acpi_pmtmr.h>
29 #include <linux/efi.h>
30 #include <linux/cpumask.h>
31 #include <linux/module.h>
32 #include <linux/dmi.h>
33 #include <linux/irq.h>
34 #include <linux/bootmem.h>
35 #include <linux/ioport.h>
37 #include <asm/pgtable.h>
38 #include <asm/io_apic.h>
41 #include <asm/mpspec.h>
44 #ifdef CONFIG_X86_LOCAL_APIC
45 # include <mach_apic.h>
48 static int __initdata acpi_force = 0;
51 int acpi_disabled = 0;
53 int acpi_disabled = 1;
55 EXPORT_SYMBOL(acpi_disabled);
59 #include <asm/proto.h>
60 #include <asm/genapic.h>
64 #ifdef CONFIG_X86_LOCAL_APIC
65 #include <mach_apic.h>
66 #include <mach_mpparse.h>
67 #endif /* CONFIG_X86_LOCAL_APIC */
71 #define BAD_MADT_ENTRY(entry, end) ( \
72 (!entry) || (unsigned long)entry + sizeof(*entry) > end || \
73 ((struct acpi_subtable_header *)entry)->length < sizeof(*entry))
75 #define PREFIX "ACPI: "
77 int acpi_noirq; /* skip ACPI IRQ initialization */
78 int acpi_pci_disabled; /* skip ACPI PCI scan and IRQ initialization */
79 EXPORT_SYMBOL(acpi_pci_disabled);
80 int acpi_ht __initdata = 1; /* enable HT */
86 static int disable_irq0_through_ioapic __initdata;
88 u8 acpi_sci_flags __initdata;
89 int acpi_sci_override_gsi __initdata;
90 int acpi_skip_timer_override __initdata;
91 int acpi_use_timer_override __initdata;
93 #ifdef CONFIG_X86_LOCAL_APIC
94 static u64 acpi_lapic_addr __initdata = APIC_DEFAULT_PHYS_BASE;
97 #ifndef __HAVE_ARCH_CMPXCHG
98 #warning ACPI uses CMPXCHG, i486 and later hardware
101 /* --------------------------------------------------------------------------
102 Boot-time Configuration
103 -------------------------------------------------------------------------- */
106 * The default interrupt routing model is PIC (8259). This gets
107 * overridden if IOAPICs are enumerated (below).
109 enum acpi_irq_model_id acpi_irq_model = ACPI_IRQ_MODEL_PIC;
113 /* rely on all ACPI tables being in the direct mapping */
114 char *__init __acpi_map_table(unsigned long phys_addr, unsigned long size)
116 if (!phys_addr || !size)
119 if (phys_addr+size <= (max_pfn_mapped << PAGE_SHIFT) + PAGE_SIZE)
120 return __va(phys_addr);
128 * Temporarily use the virtual area starting from FIX_IO_APIC_BASE_END,
129 * to map the target physical address. The problem is that set_fixmap()
130 * provides a single page, and it is possible that the page is not
132 * By using this area, we can map up to MAX_IO_APICS pages temporarily,
133 * i.e. until the next __va_range() call.
135 * Important Safety Note: The fixed I/O APIC page numbers are *subtracted*
136 * from the fixed base. That's why we start at FIX_IO_APIC_BASE_END and
137 * count idx down while incrementing the phys address.
139 char *__init __acpi_map_table(unsigned long phys, unsigned long size)
141 unsigned long base, offset, mapped_size;
144 if (phys + size < 8 * 1024 * 1024)
147 offset = phys & (PAGE_SIZE - 1);
148 mapped_size = PAGE_SIZE - offset;
149 set_fixmap(FIX_ACPI_END, phys);
150 base = fix_to_virt(FIX_ACPI_END);
153 * Most cases can be covered by the below.
156 while (mapped_size < size) {
157 if (--idx < FIX_ACPI_BEGIN)
158 return NULL; /* cannot handle this */
160 set_fixmap(idx, phys);
161 mapped_size += PAGE_SIZE;
164 return ((unsigned char *)base + offset);
168 #ifdef CONFIG_PCI_MMCONFIG
169 /* The physical address of the MMCONFIG aperture. Set from ACPI tables. */
170 struct acpi_mcfg_allocation *pci_mmcfg_config;
171 int pci_mmcfg_config_num;
173 int __init acpi_parse_mcfg(struct acpi_table_header *header)
175 struct acpi_table_mcfg *mcfg;
182 mcfg = (struct acpi_table_mcfg *)header;
184 /* how many config structures do we have */
185 pci_mmcfg_config_num = 0;
186 i = header->length - sizeof(struct acpi_table_mcfg);
187 while (i >= sizeof(struct acpi_mcfg_allocation)) {
188 ++pci_mmcfg_config_num;
189 i -= sizeof(struct acpi_mcfg_allocation);
191 if (pci_mmcfg_config_num == 0) {
192 printk(KERN_ERR PREFIX "MMCONFIG has no entries\n");
196 config_size = pci_mmcfg_config_num * sizeof(*pci_mmcfg_config);
197 pci_mmcfg_config = kmalloc(config_size, GFP_KERNEL);
198 if (!pci_mmcfg_config) {
199 printk(KERN_WARNING PREFIX
200 "No memory for MCFG config tables\n");
204 memcpy(pci_mmcfg_config, &mcfg[1], config_size);
205 for (i = 0; i < pci_mmcfg_config_num; ++i) {
206 if (pci_mmcfg_config[i].address > 0xFFFFFFFF) {
207 printk(KERN_ERR PREFIX
208 "MMCONFIG not in low 4GB of memory\n");
209 kfree(pci_mmcfg_config);
210 pci_mmcfg_config_num = 0;
217 #endif /* CONFIG_PCI_MMCONFIG */
219 #ifdef CONFIG_X86_LOCAL_APIC
220 static int __init acpi_parse_madt(struct acpi_table_header *table)
222 struct acpi_table_madt *madt = NULL;
227 madt = (struct acpi_table_madt *)table;
229 printk(KERN_WARNING PREFIX "Unable to map MADT\n");
234 acpi_lapic_addr = (u64) madt->address;
236 printk(KERN_DEBUG PREFIX "Local APIC address 0x%08x\n",
240 acpi_madt_oem_check(madt->header.oem_id, madt->header.oem_table_id);
245 static void __cpuinit acpi_register_lapic(int id, u8 enabled)
247 unsigned int ver = 0;
255 if (boot_cpu_physical_apicid != -1U)
256 ver = apic_version[boot_cpu_physical_apicid];
259 generic_processor_info(id, ver);
263 acpi_parse_lapic(struct acpi_subtable_header * header, const unsigned long end)
265 struct acpi_madt_local_apic *processor = NULL;
267 processor = (struct acpi_madt_local_apic *)header;
269 if (BAD_MADT_ENTRY(processor, end))
272 acpi_table_print_madt_entry(header);
275 * We need to register disabled CPU as well to permit
276 * counting disabled CPUs. This allows us to size
277 * cpus_possible_map more accurately, to permit
278 * to not preallocating memory for all NR_CPUS
279 * when we use CPU hotplug.
281 acpi_register_lapic(processor->id, /* APIC ID */
282 processor->lapic_flags & ACPI_MADT_ENABLED);
288 acpi_parse_sapic(struct acpi_subtable_header *header, const unsigned long end)
290 struct acpi_madt_local_sapic *processor = NULL;
292 processor = (struct acpi_madt_local_sapic *)header;
294 if (BAD_MADT_ENTRY(processor, end))
297 acpi_table_print_madt_entry(header);
299 acpi_register_lapic((processor->id << 8) | processor->eid,/* APIC ID */
300 processor->lapic_flags & ACPI_MADT_ENABLED);
306 acpi_parse_lapic_addr_ovr(struct acpi_subtable_header * header,
307 const unsigned long end)
309 struct acpi_madt_local_apic_override *lapic_addr_ovr = NULL;
311 lapic_addr_ovr = (struct acpi_madt_local_apic_override *)header;
313 if (BAD_MADT_ENTRY(lapic_addr_ovr, end))
316 acpi_lapic_addr = lapic_addr_ovr->address;
322 acpi_parse_lapic_nmi(struct acpi_subtable_header * header, const unsigned long end)
324 struct acpi_madt_local_apic_nmi *lapic_nmi = NULL;
326 lapic_nmi = (struct acpi_madt_local_apic_nmi *)header;
328 if (BAD_MADT_ENTRY(lapic_nmi, end))
331 acpi_table_print_madt_entry(header);
333 if (lapic_nmi->lint != 1)
334 printk(KERN_WARNING PREFIX "NMI not connected to LINT 1!\n");
339 #endif /*CONFIG_X86_LOCAL_APIC */
341 #ifdef CONFIG_X86_IO_APIC
344 acpi_parse_ioapic(struct acpi_subtable_header * header, const unsigned long end)
346 struct acpi_madt_io_apic *ioapic = NULL;
348 ioapic = (struct acpi_madt_io_apic *)header;
350 if (BAD_MADT_ENTRY(ioapic, end))
353 acpi_table_print_madt_entry(header);
355 mp_register_ioapic(ioapic->id,
356 ioapic->address, ioapic->global_irq_base);
362 * Parse Interrupt Source Override for the ACPI SCI
364 static void __init acpi_sci_ioapic_setup(u32 gsi, u16 polarity, u16 trigger)
366 if (trigger == 0) /* compatible SCI trigger is level */
369 if (polarity == 0) /* compatible SCI polarity is low */
372 /* Command-line over-ride via acpi_sci= */
373 if (acpi_sci_flags & ACPI_MADT_TRIGGER_MASK)
374 trigger = (acpi_sci_flags & ACPI_MADT_TRIGGER_MASK) >> 2;
376 if (acpi_sci_flags & ACPI_MADT_POLARITY_MASK)
377 polarity = acpi_sci_flags & ACPI_MADT_POLARITY_MASK;
380 * mp_config_acpi_legacy_irqs() already setup IRQs < 16
381 * If GSI is < 16, this will update its flags,
382 * else it will create a new mp_irqs[] entry.
384 mp_override_legacy_irq(gsi, polarity, trigger, gsi);
387 * stash over-ride to indicate we've been here
388 * and for later update of acpi_gbl_FADT
390 acpi_sci_override_gsi = gsi;
395 acpi_parse_int_src_ovr(struct acpi_subtable_header * header,
396 const unsigned long end)
398 struct acpi_madt_interrupt_override *intsrc = NULL;
400 intsrc = (struct acpi_madt_interrupt_override *)header;
402 if (BAD_MADT_ENTRY(intsrc, end))
405 acpi_table_print_madt_entry(header);
407 if (intsrc->source_irq == acpi_gbl_FADT.sci_interrupt) {
408 acpi_sci_ioapic_setup(intsrc->global_irq,
409 intsrc->inti_flags & ACPI_MADT_POLARITY_MASK,
410 (intsrc->inti_flags & ACPI_MADT_TRIGGER_MASK) >> 2);
414 if (acpi_skip_timer_override &&
415 intsrc->source_irq == 0 && intsrc->global_irq == 2) {
416 printk(PREFIX "BIOS IRQ0 pin2 override ignored.\n");
420 mp_override_legacy_irq(intsrc->source_irq,
421 intsrc->inti_flags & ACPI_MADT_POLARITY_MASK,
422 (intsrc->inti_flags & ACPI_MADT_TRIGGER_MASK) >> 2,
429 acpi_parse_nmi_src(struct acpi_subtable_header * header, const unsigned long end)
431 struct acpi_madt_nmi_source *nmi_src = NULL;
433 nmi_src = (struct acpi_madt_nmi_source *)header;
435 if (BAD_MADT_ENTRY(nmi_src, end))
438 acpi_table_print_madt_entry(header);
440 /* TBD: Support nimsrc entries? */
445 #endif /* CONFIG_X86_IO_APIC */
448 * acpi_pic_sci_set_trigger()
450 * use ELCR to set PIC-mode trigger type for SCI
452 * If a PIC-mode SCI is not recognized or gives spurious IRQ7's
453 * it may require Edge Trigger -- use "acpi_sci=edge"
455 * Port 0x4d0-4d1 are ECLR1 and ECLR2, the Edge/Level Control Registers
456 * for the 8259 PIC. bit[n] = 1 means irq[n] is Level, otherwise Edge.
457 * ECLR1 is IRQs 0-7 (IRQ 0, 1, 2 must be 0)
458 * ECLR2 is IRQs 8-15 (IRQ 8, 13 must be 0)
461 void __init acpi_pic_sci_set_trigger(unsigned int irq, u16 trigger)
463 unsigned int mask = 1 << irq;
464 unsigned int old, new;
466 /* Real old ELCR mask */
467 old = inb(0x4d0) | (inb(0x4d1) << 8);
470 * If we use ACPI to set PCI IRQs, then we should clear ELCR
471 * since we will set it correctly as we enable the PCI irq
474 new = acpi_noirq ? old : 0;
477 * Update SCI information in the ELCR, it isn't in the PCI
481 case 1: /* Edge - clear */
484 case 3: /* Level - set */
492 printk(PREFIX "setting ELCR to %04x (from %04x)\n", new, old);
494 outb(new >> 8, 0x4d1);
497 int acpi_gsi_to_irq(u32 gsi, unsigned int *irq)
504 * success: return IRQ number (>=0)
505 * failure: return < 0
507 int acpi_register_gsi(u32 gsi, int triggering, int polarity)
510 unsigned int plat_gsi = gsi;
514 * Make sure all (legacy) PCI IRQs are set as level-triggered.
516 if (acpi_irq_model == ACPI_IRQ_MODEL_PIC) {
517 if (triggering == ACPI_LEVEL_SENSITIVE)
518 eisa_set_level_irq(gsi);
522 #ifdef CONFIG_X86_IO_APIC
523 if (acpi_irq_model == ACPI_IRQ_MODEL_IOAPIC) {
524 plat_gsi = mp_register_gsi(gsi, triggering, polarity);
527 acpi_gsi_to_irq(plat_gsi, &irq);
532 * ACPI based hotplug support for CPU
534 #ifdef CONFIG_ACPI_HOTPLUG_CPU
536 static int __cpuinit _acpi_map_lsapic(acpi_handle handle, int *pcpu)
538 struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
539 union acpi_object *obj;
540 struct acpi_madt_local_apic *lapic;
541 cpumask_t tmp_map, new_map;
545 if (ACPI_FAILURE(acpi_evaluate_object(handle, "_MAT", NULL, &buffer)))
548 if (!buffer.length || !buffer.pointer)
551 obj = buffer.pointer;
552 if (obj->type != ACPI_TYPE_BUFFER ||
553 obj->buffer.length < sizeof(*lapic)) {
554 kfree(buffer.pointer);
558 lapic = (struct acpi_madt_local_apic *)obj->buffer.pointer;
560 if (lapic->header.type != ACPI_MADT_TYPE_LOCAL_APIC ||
561 !(lapic->lapic_flags & ACPI_MADT_ENABLED)) {
562 kfree(buffer.pointer);
568 kfree(buffer.pointer);
569 buffer.length = ACPI_ALLOCATE_BUFFER;
570 buffer.pointer = NULL;
572 tmp_map = cpu_present_map;
573 acpi_register_lapic(physid, lapic->lapic_flags & ACPI_MADT_ENABLED);
576 * If mp_register_lapic successfully generates a new logical cpu
577 * number, then the following will get us exactly what was mapped
579 cpus_andnot(new_map, cpu_present_map, tmp_map);
580 if (cpus_empty(new_map)) {
581 printk ("Unable to map lapic to logical cpu number\n");
585 cpu = first_cpu(new_map);
591 /* wrapper to silence section mismatch warning */
592 int __ref acpi_map_lsapic(acpi_handle handle, int *pcpu)
594 return _acpi_map_lsapic(handle, pcpu);
596 EXPORT_SYMBOL(acpi_map_lsapic);
598 int acpi_unmap_lsapic(int cpu)
600 per_cpu(x86_cpu_to_apicid, cpu) = -1;
601 cpu_clear(cpu, cpu_present_map);
607 EXPORT_SYMBOL(acpi_unmap_lsapic);
608 #endif /* CONFIG_ACPI_HOTPLUG_CPU */
610 int acpi_register_ioapic(acpi_handle handle, u64 phys_addr, u32 gsi_base)
616 EXPORT_SYMBOL(acpi_register_ioapic);
618 int acpi_unregister_ioapic(acpi_handle handle, u32 gsi_base)
624 EXPORT_SYMBOL(acpi_unregister_ioapic);
626 static int __init acpi_parse_sbf(struct acpi_table_header *table)
628 struct acpi_table_boot *sb;
630 sb = (struct acpi_table_boot *)table;
632 printk(KERN_WARNING PREFIX "Unable to map SBF\n");
636 sbf_port = sb->cmos_index; /* Save CMOS port */
641 #ifdef CONFIG_HPET_TIMER
642 #include <asm/hpet.h>
644 static struct __initdata resource *hpet_res;
646 static int __init acpi_parse_hpet(struct acpi_table_header *table)
648 struct acpi_table_hpet *hpet_tbl;
650 hpet_tbl = (struct acpi_table_hpet *)table;
652 printk(KERN_WARNING PREFIX "Unable to map HPET\n");
656 if (hpet_tbl->address.space_id != ACPI_SPACE_MEM) {
657 printk(KERN_WARNING PREFIX "HPET timers must be located in "
662 hpet_address = hpet_tbl->address.address;
665 * Some broken BIOSes advertise HPET at 0x0. We really do not
666 * want to allocate a resource there.
669 printk(KERN_WARNING PREFIX
670 "HPET id: %#x base: %#lx is invalid\n",
671 hpet_tbl->id, hpet_address);
676 * Some even more broken BIOSes advertise HPET at
677 * 0xfed0000000000000 instead of 0xfed00000. Fix it up and add
680 if (hpet_address == 0xfed0000000000000UL) {
681 if (!hpet_force_user) {
682 printk(KERN_WARNING PREFIX "HPET id: %#x "
683 "base: 0xfed0000000000000 is bogus\n "
684 "try hpet=force on the kernel command line to "
685 "fix it up to 0xfed00000.\n", hpet_tbl->id);
689 printk(KERN_WARNING PREFIX
690 "HPET id: %#x base: 0xfed0000000000000 fixed up "
691 "to 0xfed00000.\n", hpet_tbl->id);
695 printk(KERN_INFO PREFIX "HPET id: %#x base: %#lx\n",
696 hpet_tbl->id, hpet_address);
699 * Allocate and initialize the HPET firmware resource for adding into
700 * the resource tree during the lateinit timeframe.
702 #define HPET_RESOURCE_NAME_SIZE 9
703 hpet_res = alloc_bootmem(sizeof(*hpet_res) + HPET_RESOURCE_NAME_SIZE);
705 hpet_res->name = (void *)&hpet_res[1];
706 hpet_res->flags = IORESOURCE_MEM;
707 snprintf((char *)hpet_res->name, HPET_RESOURCE_NAME_SIZE, "HPET %u",
710 hpet_res->start = hpet_address;
711 hpet_res->end = hpet_address + (1 * 1024) - 1;
717 * hpet_insert_resource inserts the HPET resources used into the resource
720 static __init int hpet_insert_resource(void)
725 return insert_resource(&iomem_resource, hpet_res);
728 late_initcall(hpet_insert_resource);
731 #define acpi_parse_hpet NULL
734 static int __init acpi_parse_fadt(struct acpi_table_header *table)
737 #ifdef CONFIG_X86_PM_TIMER
738 /* detect the location of the ACPI PM Timer */
739 if (acpi_gbl_FADT.header.revision >= FADT2_REVISION_ID) {
741 if (acpi_gbl_FADT.xpm_timer_block.space_id !=
742 ACPI_ADR_SPACE_SYSTEM_IO)
745 pmtmr_ioport = acpi_gbl_FADT.xpm_timer_block.address;
747 * "X" fields are optional extensions to the original V1.0
748 * fields, so we must selectively expand V1.0 fields if the
749 * corresponding X field is zero.
752 pmtmr_ioport = acpi_gbl_FADT.pm_timer_block;
755 pmtmr_ioport = acpi_gbl_FADT.pm_timer_block;
758 printk(KERN_INFO PREFIX "PM-Timer IO Port: %#x\n",
764 #ifdef CONFIG_X86_LOCAL_APIC
766 * Parse LAPIC entries in MADT
767 * returns 0 on success, < 0 on error
770 static void __init acpi_register_lapic_address(unsigned long address)
772 mp_lapic_addr = address;
774 set_fixmap_nocache(FIX_APIC_BASE, address);
775 if (boot_cpu_physical_apicid == -1U) {
776 boot_cpu_physical_apicid = GET_APIC_ID(read_apic_id());
778 apic_version[boot_cpu_physical_apicid] =
779 GET_APIC_VERSION(apic_read(APIC_LVR));
784 static int __init early_acpi_parse_madt_lapic_addr_ovr(void)
792 * Note that the LAPIC address is obtained from the MADT (32-bit value)
793 * and (optionally) overriden by a LAPIC_ADDR_OVR entry (64-bit value).
797 acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_APIC_OVERRIDE,
798 acpi_parse_lapic_addr_ovr, 0);
800 printk(KERN_ERR PREFIX
801 "Error parsing LAPIC address override entry\n");
805 acpi_register_lapic_address(acpi_lapic_addr);
810 static int __init acpi_parse_madt_lapic_entries(void)
818 * Note that the LAPIC address is obtained from the MADT (32-bit value)
819 * and (optionally) overriden by a LAPIC_ADDR_OVR entry (64-bit value).
823 acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_APIC_OVERRIDE,
824 acpi_parse_lapic_addr_ovr, 0);
826 printk(KERN_ERR PREFIX
827 "Error parsing LAPIC address override entry\n");
831 acpi_register_lapic_address(acpi_lapic_addr);
833 count = acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_SAPIC,
834 acpi_parse_sapic, MAX_APICS);
837 count = acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_APIC,
838 acpi_parse_lapic, MAX_APICS);
840 printk(KERN_ERR PREFIX "No LAPIC entries present\n");
841 /* TBD: Cleanup to allow fallback to MPS */
843 } else if (count < 0) {
844 printk(KERN_ERR PREFIX "Error parsing LAPIC entry\n");
845 /* TBD: Cleanup to allow fallback to MPS */
850 acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_APIC_NMI, acpi_parse_lapic_nmi, 0);
852 printk(KERN_ERR PREFIX "Error parsing LAPIC NMI entry\n");
853 /* TBD: Cleanup to allow fallback to MPS */
858 #endif /* CONFIG_X86_LOCAL_APIC */
860 #ifdef CONFIG_X86_IO_APIC
863 #ifdef CONFIG_X86_ES7000
864 extern int es7000_plat;
871 DECLARE_BITMAP(pin_programmed, MP_MAX_IOAPIC_PIN + 1);
872 } mp_ioapic_routing[MAX_IO_APICS];
874 static int mp_find_ioapic(int gsi)
878 /* Find the IOAPIC that manages this GSI. */
879 for (i = 0; i < nr_ioapics; i++) {
880 if ((gsi >= mp_ioapic_routing[i].gsi_base)
881 && (gsi <= mp_ioapic_routing[i].gsi_end))
885 printk(KERN_ERR "ERROR: Unable to locate IOAPIC for GSI %d\n", gsi);
889 static u8 __init uniq_ioapic_id(u8 id)
892 if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) &&
893 !APIC_XAPIC(apic_version[boot_cpu_physical_apicid]))
894 return io_apic_get_unique_id(nr_ioapics, id);
899 DECLARE_BITMAP(used, 256);
900 bitmap_zero(used, 256);
901 for (i = 0; i < nr_ioapics; i++) {
902 struct mp_config_ioapic *ia = &mp_ioapics[i];
903 __set_bit(ia->mp_apicid, used);
905 if (!test_bit(id, used))
907 return find_first_zero_bit(used, 256);
911 static int bad_ioapic(unsigned long address)
913 if (nr_ioapics >= MAX_IO_APICS) {
914 printk(KERN_ERR "ERROR: Max # of I/O APICs (%d) exceeded "
915 "(found %d)\n", MAX_IO_APICS, nr_ioapics);
916 panic("Recompile kernel with bigger MAX_IO_APICS!\n");
919 printk(KERN_ERR "WARNING: Bogus (zero) I/O APIC address"
920 " found in table, skipping!\n");
926 void __init mp_register_ioapic(int id, u32 address, u32 gsi_base)
930 if (bad_ioapic(address))
935 mp_ioapics[idx].mp_type = MP_IOAPIC;
936 mp_ioapics[idx].mp_flags = MPC_APIC_USABLE;
937 mp_ioapics[idx].mp_apicaddr = address;
939 set_fixmap_nocache(FIX_IO_APIC_BASE_0 + idx, address);
940 mp_ioapics[idx].mp_apicid = uniq_ioapic_id(id);
942 mp_ioapics[idx].mp_apicver = io_apic_get_version(idx);
944 mp_ioapics[idx].mp_apicver = 0;
947 * Build basic GSI lookup table to facilitate gsi->io_apic lookups
948 * and to prevent reprogramming of IOAPIC pins (PCI GSIs).
950 mp_ioapic_routing[idx].apic_id = mp_ioapics[idx].mp_apicid;
951 mp_ioapic_routing[idx].gsi_base = gsi_base;
952 mp_ioapic_routing[idx].gsi_end = gsi_base +
953 io_apic_get_redir_entries(idx);
955 printk(KERN_INFO "IOAPIC[%d]: apic_id %d, version %d, address 0x%lx, "
956 "GSI %d-%d\n", idx, mp_ioapics[idx].mp_apicid,
957 mp_ioapics[idx].mp_apicver, mp_ioapics[idx].mp_apicaddr,
958 mp_ioapic_routing[idx].gsi_base, mp_ioapic_routing[idx].gsi_end);
963 static void assign_to_mp_irq(struct mp_config_intsrc *m,
964 struct mp_config_intsrc *mp_irq)
966 memcpy(mp_irq, m, sizeof(struct mp_config_intsrc));
969 static int mp_irq_cmp(struct mp_config_intsrc *mp_irq,
970 struct mp_config_intsrc *m)
972 return memcmp(mp_irq, m, sizeof(struct mp_config_intsrc));
975 static void save_mp_irq(struct mp_config_intsrc *m)
979 for (i = 0; i < mp_irq_entries; i++) {
980 if (!mp_irq_cmp(&mp_irqs[i], m))
984 assign_to_mp_irq(m, &mp_irqs[mp_irq_entries]);
985 if (++mp_irq_entries == MAX_IRQ_SOURCES)
986 panic("Max # of irq sources exceeded!!\n");
989 void __init mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger, u32 gsi)
993 struct mp_config_intsrc mp_irq;
995 /* Skip the 8254 timer interrupt (IRQ 0) if requested. */
996 if (bus_irq == 0 && disable_irq0_through_ioapic)
1000 * Convert 'gsi' to 'ioapic.pin'.
1002 ioapic = mp_find_ioapic(gsi);
1005 pin = gsi - mp_ioapic_routing[ioapic].gsi_base;
1008 * TBD: This check is for faulty timer entries, where the override
1009 * erroneously sets the trigger to level, resulting in a HUGE
1010 * increase of timer interrupts!
1012 if ((bus_irq == 0) && (trigger == 3))
1015 mp_irq.mp_type = MP_INTSRC;
1016 mp_irq.mp_irqtype = mp_INT;
1017 mp_irq.mp_irqflag = (trigger << 2) | polarity;
1018 mp_irq.mp_srcbus = MP_ISA_BUS;
1019 mp_irq.mp_srcbusirq = bus_irq; /* IRQ */
1020 mp_irq.mp_dstapic = mp_ioapics[ioapic].mp_apicid; /* APIC ID */
1021 mp_irq.mp_dstirq = pin; /* INTIN# */
1023 save_mp_irq(&mp_irq);
1026 void __init mp_config_acpi_legacy_irqs(void)
1030 unsigned int dstapic;
1031 struct mp_config_intsrc mp_irq;
1033 #if defined (CONFIG_MCA) || defined (CONFIG_EISA)
1035 * Fabricate the legacy ISA bus (bus #31).
1037 mp_bus_id_to_type[MP_ISA_BUS] = MP_BUS_ISA;
1039 set_bit(MP_ISA_BUS, mp_bus_not_pci);
1040 Dprintk("Bus #%d is ISA\n", MP_ISA_BUS);
1042 #ifdef CONFIG_X86_ES7000
1044 * Older generations of ES7000 have no legacy identity mappings
1046 if (es7000_plat == 1)
1051 * Locate the IOAPIC that manages the ISA IRQs (0-15).
1053 ioapic = mp_find_ioapic(0);
1056 dstapic = mp_ioapics[ioapic].mp_apicid;
1059 * Use the default configuration for the IRQs 0-15. Unless
1060 * overridden by (MADT) interrupt source override entries.
1062 for (i = 0; i < 16; i++) {
1065 /* Skip the 8254 timer interrupt (IRQ 0) if requested. */
1066 if (i == 0 && disable_irq0_through_ioapic)
1069 for (idx = 0; idx < mp_irq_entries; idx++) {
1070 struct mp_config_intsrc *irq = mp_irqs + idx;
1072 /* Do we already have a mapping for this ISA IRQ? */
1073 if (irq->mp_srcbus == MP_ISA_BUS
1074 && irq->mp_srcbusirq == i)
1077 /* Do we already have a mapping for this IOAPIC pin */
1078 if (irq->mp_dstapic == dstapic &&
1079 irq->mp_dstirq == i)
1083 if (idx != mp_irq_entries) {
1084 printk(KERN_DEBUG "ACPI: IRQ%d used by override.\n", i);
1085 continue; /* IRQ already used */
1088 mp_irq.mp_type = MP_INTSRC;
1089 mp_irq.mp_irqflag = 0; /* Conforming */
1090 mp_irq.mp_srcbus = MP_ISA_BUS;
1091 mp_irq.mp_dstapic = dstapic;
1092 mp_irq.mp_irqtype = mp_INT;
1093 mp_irq.mp_srcbusirq = i; /* Identity mapped */
1094 mp_irq.mp_dstirq = i;
1096 save_mp_irq(&mp_irq);
1100 int mp_register_gsi(u32 gsi, int triggering, int polarity)
1104 #ifdef CONFIG_X86_32
1105 #define MAX_GSI_NUM 4096
1106 #define IRQ_COMPRESSION_START 64
1108 static int pci_irq = IRQ_COMPRESSION_START;
1110 * Mapping between Global System Interrupts, which
1111 * represent all possible interrupts, and IRQs
1112 * assigned to actual devices.
1114 static int gsi_to_irq[MAX_GSI_NUM];
1117 if (acpi_irq_model != ACPI_IRQ_MODEL_IOAPIC)
1121 /* Don't set up the ACPI SCI because it's already set up */
1122 if (acpi_gbl_FADT.sci_interrupt == gsi)
1125 ioapic = mp_find_ioapic(gsi);
1127 printk(KERN_WARNING "No IOAPIC for GSI %u\n", gsi);
1131 ioapic_pin = gsi - mp_ioapic_routing[ioapic].gsi_base;
1133 #ifdef CONFIG_X86_32
1134 if (ioapic_renumber_irq)
1135 gsi = ioapic_renumber_irq(ioapic, gsi);
1139 * Avoid pin reprogramming. PRTs typically include entries
1140 * with redundant pin->gsi mappings (but unique PCI devices);
1141 * we only program the IOAPIC on the first.
1143 if (ioapic_pin > MP_MAX_IOAPIC_PIN) {
1144 printk(KERN_ERR "Invalid reference to IOAPIC pin "
1145 "%d-%d\n", mp_ioapic_routing[ioapic].apic_id,
1149 if (test_bit(ioapic_pin, mp_ioapic_routing[ioapic].pin_programmed)) {
1150 Dprintk(KERN_DEBUG "Pin %d-%d already programmed\n",
1151 mp_ioapic_routing[ioapic].apic_id, ioapic_pin);
1152 #ifdef CONFIG_X86_32
1153 return (gsi < IRQ_COMPRESSION_START ? gsi : gsi_to_irq[gsi]);
1159 set_bit(ioapic_pin, mp_ioapic_routing[ioapic].pin_programmed);
1160 #ifdef CONFIG_X86_32
1162 * For GSI >= 64, use IRQ compression
1164 if ((gsi >= IRQ_COMPRESSION_START)
1165 && (triggering == ACPI_LEVEL_SENSITIVE)) {
1167 * For PCI devices assign IRQs in order, avoiding gaps
1168 * due to unused I/O APIC pins.
1171 if (gsi < MAX_GSI_NUM) {
1173 * Retain the VIA chipset work-around (gsi > 15), but
1174 * avoid a problem where the 8254 timer (IRQ0) is setup
1175 * via an override (so it's not on pin 0 of the ioapic),
1176 * and at the same time, the pin 0 interrupt is a PCI
1177 * type. The gsi > 15 test could cause these two pins
1178 * to be shared as IRQ0, and they are not shareable.
1179 * So test for this condition, and if necessary, avoid
1180 * the pin collision.
1184 * Don't assign IRQ used by ACPI SCI
1186 if (gsi == acpi_gbl_FADT.sci_interrupt)
1188 gsi_to_irq[irq] = gsi;
1190 printk(KERN_ERR "GSI %u is too high\n", gsi);
1195 io_apic_set_pci_routing(ioapic, ioapic_pin, gsi,
1196 triggering == ACPI_EDGE_SENSITIVE ? 0 : 1,
1197 polarity == ACPI_ACTIVE_HIGH ? 0 : 1);
1201 int mp_config_acpi_gsi(unsigned char number, unsigned int devfn, u8 pin,
1202 u32 gsi, int triggering, int polarity)
1204 #ifdef CONFIG_X86_MPPARSE
1205 struct mp_config_intsrc mp_irq;
1211 /* print the entry should happen on mptable identically */
1212 mp_irq.mp_type = MP_INTSRC;
1213 mp_irq.mp_irqtype = mp_INT;
1214 mp_irq.mp_irqflag = (triggering == ACPI_EDGE_SENSITIVE ? 4 : 0x0c) |
1215 (polarity == ACPI_ACTIVE_HIGH ? 1 : 3);
1216 mp_irq.mp_srcbus = number;
1217 mp_irq.mp_srcbusirq = (((devfn >> 3) & 0x1f) << 2) | ((pin - 1) & 3);
1218 ioapic = mp_find_ioapic(gsi);
1219 mp_irq.mp_dstapic = mp_ioapic_routing[ioapic].apic_id;
1220 mp_irq.mp_dstirq = gsi - mp_ioapic_routing[ioapic].gsi_base;
1222 save_mp_irq(&mp_irq);
1228 * Parse IOAPIC related entries in MADT
1229 * returns 0 on success, < 0 on error
1231 static int __init acpi_parse_madt_ioapic_entries(void)
1236 * ACPI interpreter is required to complete interrupt setup,
1237 * so if it is off, don't enumerate the io-apics with ACPI.
1238 * If MPS is present, it will handle them,
1239 * otherwise the system will stay in PIC mode
1241 if (acpi_disabled || acpi_noirq) {
1249 * if "noapic" boot option, don't look for IO-APICs
1251 if (skip_ioapic_setup) {
1252 printk(KERN_INFO PREFIX "Skipping IOAPIC probe "
1253 "due to 'noapic' option.\n");
1258 acpi_table_parse_madt(ACPI_MADT_TYPE_IO_APIC, acpi_parse_ioapic,
1261 printk(KERN_ERR PREFIX "No IOAPIC entries present\n");
1263 } else if (count < 0) {
1264 printk(KERN_ERR PREFIX "Error parsing IOAPIC entry\n");
1269 acpi_table_parse_madt(ACPI_MADT_TYPE_INTERRUPT_OVERRIDE, acpi_parse_int_src_ovr,
1272 printk(KERN_ERR PREFIX
1273 "Error parsing interrupt source overrides entry\n");
1274 /* TBD: Cleanup to allow fallback to MPS */
1279 * If BIOS did not supply an INT_SRC_OVR for the SCI
1280 * pretend we got one so we can set the SCI flags.
1282 if (!acpi_sci_override_gsi)
1283 acpi_sci_ioapic_setup(acpi_gbl_FADT.sci_interrupt, 0, 0);
1285 /* Fill in identity legacy mapings where no override */
1286 mp_config_acpi_legacy_irqs();
1289 acpi_table_parse_madt(ACPI_MADT_TYPE_NMI_SOURCE, acpi_parse_nmi_src,
1292 printk(KERN_ERR PREFIX "Error parsing NMI SRC entry\n");
1293 /* TBD: Cleanup to allow fallback to MPS */
1300 static inline int acpi_parse_madt_ioapic_entries(void)
1304 #endif /* !CONFIG_X86_IO_APIC */
1306 static void __init early_acpi_process_madt(void)
1308 #ifdef CONFIG_X86_LOCAL_APIC
1311 if (!acpi_table_parse(ACPI_SIG_MADT, acpi_parse_madt)) {
1314 * Parse MADT LAPIC entries
1316 error = early_acpi_parse_madt_lapic_addr_ovr();
1319 smp_found_config = 1;
1321 if (error == -EINVAL) {
1323 * Dell Precision Workstation 410, 610 come here.
1325 printk(KERN_ERR PREFIX
1326 "Invalid BIOS MADT, disabling ACPI\n");
1333 static void __init acpi_process_madt(void)
1335 #ifdef CONFIG_X86_LOCAL_APIC
1338 if (!acpi_table_parse(ACPI_SIG_MADT, acpi_parse_madt)) {
1341 * Parse MADT LAPIC entries
1343 error = acpi_parse_madt_lapic_entries();
1347 #ifdef CONFIG_X86_GENERICARCH
1348 generic_bigsmp_probe();
1351 * Parse MADT IO-APIC entries
1353 error = acpi_parse_madt_ioapic_entries();
1355 acpi_irq_model = ACPI_IRQ_MODEL_IOAPIC;
1356 acpi_irq_balance_set(NULL);
1359 smp_found_config = 1;
1360 setup_apic_routing();
1363 if (error == -EINVAL) {
1365 * Dell Precision Workstation 410, 610 come here.
1367 printk(KERN_ERR PREFIX
1368 "Invalid BIOS MADT, disabling ACPI\n");
1378 static int __init disable_acpi_irq(const struct dmi_system_id *d)
1381 printk(KERN_NOTICE "%s detected: force use of acpi=noirq\n",
1388 static int __init disable_acpi_pci(const struct dmi_system_id *d)
1391 printk(KERN_NOTICE "%s detected: force use of pci=noacpi\n",
1398 static int __init dmi_disable_acpi(const struct dmi_system_id *d)
1401 printk(KERN_NOTICE "%s detected: acpi off\n", d->ident);
1405 "Warning: DMI blacklist says broken, but acpi forced\n");
1411 * Limit ACPI to CPU enumeration for HT
1413 static int __init force_acpi_ht(const struct dmi_system_id *d)
1416 printk(KERN_NOTICE "%s detected: force use of acpi=ht\n",
1422 "Warning: acpi=force overrules DMI blacklist: acpi=ht\n");
1428 * Don't register any I/O APIC entries for the 8254 timer IRQ.
1431 dmi_disable_irq0_through_ioapic(const struct dmi_system_id *d)
1433 pr_notice("%s detected: disabling IRQ 0 through I/O APIC\n", d->ident);
1434 disable_irq0_through_ioapic = 1;
1439 * If your system is blacklisted here, but you find that acpi=force
1440 * works for you, please contact acpi-devel@sourceforge.net
1442 static struct dmi_system_id __initdata acpi_dmi_table[] = {
1444 * Boxes that need ACPI disabled
1447 .callback = dmi_disable_acpi,
1448 .ident = "IBM Thinkpad",
1450 DMI_MATCH(DMI_BOARD_VENDOR, "IBM"),
1451 DMI_MATCH(DMI_BOARD_NAME, "2629H1G"),
1456 * Boxes that need acpi=ht
1459 .callback = force_acpi_ht,
1460 .ident = "FSC Primergy T850",
1462 DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
1463 DMI_MATCH(DMI_PRODUCT_NAME, "PRIMERGY T850"),
1467 .callback = force_acpi_ht,
1468 .ident = "HP VISUALIZE NT Workstation",
1470 DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"),
1471 DMI_MATCH(DMI_PRODUCT_NAME, "HP VISUALIZE NT Workstation"),
1475 .callback = force_acpi_ht,
1476 .ident = "Compaq Workstation W8000",
1478 DMI_MATCH(DMI_SYS_VENDOR, "Compaq"),
1479 DMI_MATCH(DMI_PRODUCT_NAME, "Workstation W8000"),
1483 .callback = force_acpi_ht,
1484 .ident = "ASUS P4B266",
1486 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
1487 DMI_MATCH(DMI_BOARD_NAME, "P4B266"),
1491 .callback = force_acpi_ht,
1492 .ident = "ASUS P2B-DS",
1494 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
1495 DMI_MATCH(DMI_BOARD_NAME, "P2B-DS"),
1499 .callback = force_acpi_ht,
1500 .ident = "ASUS CUR-DLS",
1502 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
1503 DMI_MATCH(DMI_BOARD_NAME, "CUR-DLS"),
1507 .callback = force_acpi_ht,
1508 .ident = "ABIT i440BX-W83977",
1510 DMI_MATCH(DMI_BOARD_VENDOR, "ABIT <http://www.abit.com>"),
1511 DMI_MATCH(DMI_BOARD_NAME, "i440BX-W83977 (BP6)"),
1515 .callback = force_acpi_ht,
1516 .ident = "IBM Bladecenter",
1518 DMI_MATCH(DMI_BOARD_VENDOR, "IBM"),
1519 DMI_MATCH(DMI_BOARD_NAME, "IBM eServer BladeCenter HS20"),
1523 .callback = force_acpi_ht,
1524 .ident = "IBM eServer xSeries 360",
1526 DMI_MATCH(DMI_BOARD_VENDOR, "IBM"),
1527 DMI_MATCH(DMI_BOARD_NAME, "eServer xSeries 360"),
1531 .callback = force_acpi_ht,
1532 .ident = "IBM eserver xSeries 330",
1534 DMI_MATCH(DMI_BOARD_VENDOR, "IBM"),
1535 DMI_MATCH(DMI_BOARD_NAME, "eserver xSeries 330"),
1539 .callback = force_acpi_ht,
1540 .ident = "IBM eserver xSeries 440",
1542 DMI_MATCH(DMI_BOARD_VENDOR, "IBM"),
1543 DMI_MATCH(DMI_PRODUCT_NAME, "eserver xSeries 440"),
1548 * Boxes that need ACPI PCI IRQ routing disabled
1551 .callback = disable_acpi_irq,
1552 .ident = "ASUS A7V",
1554 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC"),
1555 DMI_MATCH(DMI_BOARD_NAME, "<A7V>"),
1556 /* newer BIOS, Revision 1011, does work */
1557 DMI_MATCH(DMI_BIOS_VERSION,
1558 "ASUS A7V ACPI BIOS Revision 1007"),
1563 * Latest BIOS for IBM 600E (1.16) has bad pcinum
1564 * for LPC bridge, which is needed for the PCI
1565 * interrupt links to work. DSDT fix is in bug 5966.
1566 * 2645, 2646 model numbers are shared with 600/600E/600X
1568 .callback = disable_acpi_irq,
1569 .ident = "IBM Thinkpad 600 Series 2645",
1571 DMI_MATCH(DMI_BOARD_VENDOR, "IBM"),
1572 DMI_MATCH(DMI_BOARD_NAME, "2645"),
1576 .callback = disable_acpi_irq,
1577 .ident = "IBM Thinkpad 600 Series 2646",
1579 DMI_MATCH(DMI_BOARD_VENDOR, "IBM"),
1580 DMI_MATCH(DMI_BOARD_NAME, "2646"),
1584 * Boxes that need ACPI PCI IRQ routing and PCI scan disabled
1587 .callback = disable_acpi_pci,
1588 .ident = "ASUS PR-DLS",
1590 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
1591 DMI_MATCH(DMI_BOARD_NAME, "PR-DLS"),
1592 DMI_MATCH(DMI_BIOS_VERSION,
1593 "ASUS PR-DLS ACPI BIOS Revision 1010"),
1594 DMI_MATCH(DMI_BIOS_DATE, "03/21/2003")
1598 .callback = disable_acpi_pci,
1599 .ident = "Acer TravelMate 36x Laptop",
1601 DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
1602 DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 360"),
1606 * HP laptops which use a DSDT reporting as HP/SB400/10000,
1607 * which includes some code which overrides all temperature
1608 * trip points to 16C if the INTIN2 input of the I/O APIC
1609 * is enabled. This input is incorrectly designated the
1610 * ISA IRQ 0 via an interrupt source override even though
1611 * it is wired to the output of the master 8259A and INTIN0
1612 * is not connected at all. Abandon any attempts to route
1613 * IRQ 0 through the I/O APIC therefore.
1616 .callback = dmi_disable_irq0_through_ioapic,
1617 .ident = "HP NX6125 laptop",
1619 DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
1620 DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq nx6125"),
1624 .callback = dmi_disable_irq0_through_ioapic,
1625 .ident = "HP NX6325 laptop",
1627 DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
1628 DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq nx6325"),
1634 #endif /* __i386__ */
1637 * acpi_boot_table_init() and acpi_boot_init()
1638 * called from setup_arch(), always.
1639 * 1. checksums all tables
1640 * 2. enumerates lapics
1641 * 3. enumerates io-apics
1643 * acpi_table_init() is separate to allow reading SRAT without
1644 * other side effects.
1646 * side effects of acpi_boot_init:
1647 * acpi_lapic = 1 if LAPIC found
1648 * acpi_ioapic = 1 if IOAPIC found
1649 * if (acpi_lapic && acpi_ioapic) smp_found_config = 1;
1650 * if acpi_blacklisted() acpi_disabled = 1;
1651 * acpi_irq_model=...
1654 * return value: (currently ignored)
1659 int __init acpi_boot_table_init(void)
1664 dmi_check_system(acpi_dmi_table);
1668 * If acpi_disabled, bail out
1669 * One exception: acpi=ht continues far enough to enumerate LAPICs
1671 if (acpi_disabled && !acpi_ht)
1675 * Initialize the ACPI boot-time table parser.
1677 error = acpi_table_init();
1683 acpi_table_parse(ACPI_SIG_BOOT, acpi_parse_sbf);
1686 * blacklist may disable ACPI entirely
1688 error = acpi_blacklisted();
1691 printk(KERN_WARNING PREFIX "acpi=force override\n");
1693 printk(KERN_WARNING PREFIX "Disabling ACPI support\n");
1702 int __init early_acpi_boot_init(void)
1705 * If acpi_disabled, bail out
1706 * One exception: acpi=ht continues far enough to enumerate LAPICs
1708 if (acpi_disabled && !acpi_ht)
1712 * Process the Multiple APIC Description Table (MADT), if present
1714 early_acpi_process_madt();
1719 int __init acpi_boot_init(void)
1722 * If acpi_disabled, bail out
1723 * One exception: acpi=ht continues far enough to enumerate LAPICs
1725 if (acpi_disabled && !acpi_ht)
1728 acpi_table_parse(ACPI_SIG_BOOT, acpi_parse_sbf);
1731 * set sci_int and PM timer address
1733 acpi_table_parse(ACPI_SIG_FADT, acpi_parse_fadt);
1736 * Process the Multiple APIC Description Table (MADT), if present
1738 acpi_process_madt();
1740 acpi_table_parse(ACPI_SIG_HPET, acpi_parse_hpet);
1745 static int __init parse_acpi(char *arg)
1750 /* "acpi=off" disables both ACPI table parsing and interpreter */
1751 if (strcmp(arg, "off") == 0) {
1754 /* acpi=force to over-ride black-list */
1755 else if (strcmp(arg, "force") == 0) {
1760 /* acpi=strict disables out-of-spec workarounds */
1761 else if (strcmp(arg, "strict") == 0) {
1764 /* Limit ACPI just to boot-time to enable HT */
1765 else if (strcmp(arg, "ht") == 0) {
1770 /* "acpi=noirq" disables ACPI interrupt routing */
1771 else if (strcmp(arg, "noirq") == 0) {
1774 /* Core will printk when we return error. */
1779 early_param("acpi", parse_acpi);
1781 /* FIXME: Using pci= for an ACPI parameter is a travesty. */
1782 static int __init parse_pci(char *arg)
1784 if (arg && strcmp(arg, "noacpi") == 0)
1788 early_param("pci", parse_pci);
1790 #ifdef CONFIG_X86_IO_APIC
1791 static int __init parse_acpi_skip_timer_override(char *arg)
1793 acpi_skip_timer_override = 1;
1796 early_param("acpi_skip_timer_override", parse_acpi_skip_timer_override);
1798 static int __init parse_acpi_use_timer_override(char *arg)
1800 acpi_use_timer_override = 1;
1803 early_param("acpi_use_timer_override", parse_acpi_use_timer_override);
1804 #endif /* CONFIG_X86_IO_APIC */
1806 static int __init setup_acpi_sci(char *s)
1810 if (!strcmp(s, "edge"))
1811 acpi_sci_flags = ACPI_MADT_TRIGGER_EDGE |
1812 (acpi_sci_flags & ~ACPI_MADT_TRIGGER_MASK);
1813 else if (!strcmp(s, "level"))
1814 acpi_sci_flags = ACPI_MADT_TRIGGER_LEVEL |
1815 (acpi_sci_flags & ~ACPI_MADT_TRIGGER_MASK);
1816 else if (!strcmp(s, "high"))
1817 acpi_sci_flags = ACPI_MADT_POLARITY_ACTIVE_HIGH |
1818 (acpi_sci_flags & ~ACPI_MADT_POLARITY_MASK);
1819 else if (!strcmp(s, "low"))
1820 acpi_sci_flags = ACPI_MADT_POLARITY_ACTIVE_LOW |
1821 (acpi_sci_flags & ~ACPI_MADT_POLARITY_MASK);
1826 early_param("acpi_sci", setup_acpi_sci);
1828 int __acpi_acquire_global_lock(unsigned int *lock)
1830 unsigned int old, new, val;
1833 new = (((old & ~0x3) + 2) + ((old >> 1) & 0x1));
1834 val = cmpxchg(lock, old, new);
1835 } while (unlikely (val != old));
1836 return (new < 3) ? -1 : 0;
1839 int __acpi_release_global_lock(unsigned int *lock)
1841 unsigned int old, new, val;
1845 val = cmpxchg(lock, old, new);
1846 } while (unlikely (val != old));