]> www.pilppa.org Git - linux-2.6-omap-h63xx.git/blob - arch/powerpc/platforms/iseries/pci.c
[POWERPC] iSeries: Remove some dead code from pci.c
[linux-2.6-omap-h63xx.git] / arch / powerpc / platforms / iseries / pci.c
1 /*
2  * Copyright (C) 2001 Allan Trautman, IBM Corporation
3  *
4  * iSeries specific routines for PCI.
5  *
6  * Based on code from pci.c and iSeries_pci.c 32bit
7  *
8  * This program is free software; you can redistribute it and/or modify
9  * it under the terms of the GNU General Public License as published by
10  * the Free Software Foundation; either version 2 of the License, or
11  * (at your option) any later version.
12  *
13  * This program is distributed in the hope that it will be useful,
14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
16  * GNU General Public License for more details.
17  *
18  * You should have received a copy of the GNU General Public License
19  * along with this program; if not, write to the Free Software
20  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
21  */
22 #include <linux/kernel.h>
23 #include <linux/list.h>
24 #include <linux/string.h>
25 #include <linux/init.h>
26 #include <linux/module.h>
27 #include <linux/pci.h>
28
29 #include <asm/io.h>
30 #include <asm/irq.h>
31 #include <asm/prom.h>
32 #include <asm/machdep.h>
33 #include <asm/pci-bridge.h>
34 #include <asm/iommu.h>
35 #include <asm/abs_addr.h>
36 #include <asm/firmware.h>
37
38 #include <asm/iseries/hv_call_xm.h>
39 #include <asm/iseries/mf.h>
40 #include <asm/iseries/iommu.h>
41
42 #include <asm/ppc-pci.h>
43
44 #include "irq.h"
45 #include "pci.h"
46 #include "call_pci.h"
47
48 #define PCI_RETRY_MAX   3
49 static int limit_pci_retries = 1;       /* Set Retry Error on. */
50
51 /*
52  * Table defines
53  * Each Entry size is 4 MB * 1024 Entries = 4GB I/O address space.
54  */
55 #define IOMM_TABLE_MAX_ENTRIES  1024
56 #define IOMM_TABLE_ENTRY_SIZE   0x0000000000400000UL
57 #define BASE_IO_MEMORY          0xE000000000000000UL
58
59 static unsigned long max_io_memory = BASE_IO_MEMORY;
60 static long current_iomm_table_entry;
61
62 /*
63  * Lookup Tables.
64  */
65 static struct device_node *iomm_table[IOMM_TABLE_MAX_ENTRIES];
66 static u8 iobar_table[IOMM_TABLE_MAX_ENTRIES];
67
68 static const char pci_io_text[] = "iSeries PCI I/O";
69 static DEFINE_SPINLOCK(iomm_table_lock);
70
71 /*
72  * iomm_table_allocate_entry
73  *
74  * Adds pci_dev entry in address translation table
75  *
76  * - Allocates the number of entries required in table base on BAR
77  *   size.
78  * - Allocates starting at BASE_IO_MEMORY and increases.
79  * - The size is round up to be a multiple of entry size.
80  * - CurrentIndex is incremented to keep track of the last entry.
81  * - Builds the resource entry for allocated BARs.
82  */
83 static void __init iomm_table_allocate_entry(struct pci_dev *dev, int bar_num)
84 {
85         struct resource *bar_res = &dev->resource[bar_num];
86         long bar_size = pci_resource_len(dev, bar_num);
87
88         /*
89          * No space to allocate, quick exit, skip Allocation.
90          */
91         if (bar_size == 0)
92                 return;
93         /*
94          * Set Resource values.
95          */
96         spin_lock(&iomm_table_lock);
97         bar_res->name = pci_io_text;
98         bar_res->start = BASE_IO_MEMORY +
99                 IOMM_TABLE_ENTRY_SIZE * current_iomm_table_entry;
100         bar_res->end = bar_res->start + bar_size - 1;
101         /*
102          * Allocate the number of table entries needed for BAR.
103          */
104         while (bar_size > 0 ) {
105                 iomm_table[current_iomm_table_entry] = dev->sysdata;
106                 iobar_table[current_iomm_table_entry] = bar_num;
107                 bar_size -= IOMM_TABLE_ENTRY_SIZE;
108                 ++current_iomm_table_entry;
109         }
110         max_io_memory = BASE_IO_MEMORY +
111                 IOMM_TABLE_ENTRY_SIZE * current_iomm_table_entry;
112         spin_unlock(&iomm_table_lock);
113 }
114
115 /*
116  * allocate_device_bars
117  *
118  * - Allocates ALL pci_dev BAR's and updates the resources with the
119  *   BAR value.  BARS with zero length will have the resources
120  *   The HvCallPci_getBarParms is used to get the size of the BAR
121  *   space.  It calls iomm_table_allocate_entry to allocate
122  *   each entry.
123  * - Loops through The Bar resources(0 - 5) including the ROM
124  *   is resource(6).
125  */
126 static void __init allocate_device_bars(struct pci_dev *dev)
127 {
128         int bar_num;
129
130         for (bar_num = 0; bar_num <= PCI_ROM_RESOURCE; ++bar_num)
131                 iomm_table_allocate_entry(dev, bar_num);
132 }
133
134 /*
135  * Log error information to system console.
136  * Filter out the device not there errors.
137  * PCI: EADs Connect Failed 0x18.58.10 Rc: 0x00xx
138  * PCI: Read Vendor Failed 0x18.58.10 Rc: 0x00xx
139  * PCI: Connect Bus Unit Failed 0x18.58.10 Rc: 0x00xx
140  */
141 static void pci_log_error(char *error, int bus, int subbus,
142                 int agent, int hv_res)
143 {
144         if (hv_res == 0x0302)
145                 return;
146         printk(KERN_ERR "PCI: %s Failed: 0x%02X.%02X.%02X Rc: 0x%04X",
147                error, bus, subbus, agent, hv_res);
148 }
149
150 /*
151  * Look down the chain to find the matching Device Device
152  */
153 static struct device_node *find_device_node(int bus, int devfn)
154 {
155         struct device_node *node;
156
157         for (node = NULL; (node = of_find_all_nodes(node)); ) {
158                 struct pci_dn *pdn = PCI_DN(node);
159
160                 if (pdn && (bus == pdn->busno) && (devfn == pdn->devfn))
161                         return node;
162         }
163         return NULL;
164 }
165
166 /*
167  * iSeries_pci_final_fixup(void)
168  */
169 void __init iSeries_pci_final_fixup(void)
170 {
171         struct pci_dev *pdev = NULL;
172         struct device_node *node;
173         int num_dev = 0;
174
175         /* Fix up at the device node and pci_dev relationship */
176         mf_display_src(0xC9000100);
177
178         printk("pcibios_final_fixup\n");
179         for_each_pci_dev(pdev) {
180                 node = find_device_node(pdev->bus->number, pdev->devfn);
181                 printk("pci dev %p (%x.%x), node %p\n", pdev,
182                        pdev->bus->number, pdev->devfn, node);
183
184                 if (node != NULL) {
185                         struct pci_dn *pdn = PCI_DN(node);
186                         const u32 *agent;
187
188                         agent = of_get_property(node, "linux,agent-id", NULL);
189                         if ((pdn != NULL) && (agent != NULL)) {
190                                 u8 irq = iSeries_allocate_IRQ(pdn->busno, 0,
191                                                 pdn->bussubno);
192                                 int err;
193
194                                 err = HvCallXm_connectBusUnit(pdn->busno, pdn->bussubno,
195                                                 *agent, irq);
196                                 if (err)
197                                         pci_log_error("Connect Bus Unit",
198                                                 pdn->busno, pdn->bussubno, *agent, err);
199                                 else {
200                                         err = HvCallPci_configStore8(pdn->busno, pdn->bussubno,
201                                                         *agent,
202                                                         PCI_INTERRUPT_LINE,
203                                                         irq);
204                                         if (err)
205                                                 pci_log_error("PciCfgStore Irq Failed!",
206                                                         pdn->busno, pdn->bussubno, *agent, err);
207                                 }
208                                 if (!err)
209                                         pdev->irq = irq;
210                         }
211
212                         ++num_dev;
213                         pdev->sysdata = node;
214                         PCI_DN(node)->pcidev = pdev;
215                         allocate_device_bars(pdev);
216                         iSeries_Device_Information(pdev, num_dev);
217                         iommu_devnode_init_iSeries(pdev, node);
218                 } else
219                         printk("PCI: Device Tree not found for 0x%016lX\n",
220                                         (unsigned long)pdev);
221         }
222         iSeries_activate_IRQs();
223         mf_display_src(0xC9000200);
224 }
225
226 /*
227  * Config space read and write functions.
228  * For now at least, we look for the device node for the bus and devfn
229  * that we are asked to access.  It may be possible to translate the devfn
230  * to a subbus and deviceid more directly.
231  */
232 static u64 hv_cfg_read_func[4]  = {
233         HvCallPciConfigLoad8, HvCallPciConfigLoad16,
234         HvCallPciConfigLoad32, HvCallPciConfigLoad32
235 };
236
237 static u64 hv_cfg_write_func[4] = {
238         HvCallPciConfigStore8, HvCallPciConfigStore16,
239         HvCallPciConfigStore32, HvCallPciConfigStore32
240 };
241
242 /*
243  * Read PCI config space
244  */
245 static int iSeries_pci_read_config(struct pci_bus *bus, unsigned int devfn,
246                 int offset, int size, u32 *val)
247 {
248         struct device_node *node = find_device_node(bus->number, devfn);
249         u64 fn;
250         struct HvCallPci_LoadReturn ret;
251
252         if (node == NULL)
253                 return PCIBIOS_DEVICE_NOT_FOUND;
254         if (offset > 255) {
255                 *val = ~0;
256                 return PCIBIOS_BAD_REGISTER_NUMBER;
257         }
258
259         fn = hv_cfg_read_func[(size - 1) & 3];
260         HvCall3Ret16(fn, &ret, iseries_ds_addr(node), offset, 0);
261
262         if (ret.rc != 0) {
263                 *val = ~0;
264                 return PCIBIOS_DEVICE_NOT_FOUND;        /* or something */
265         }
266
267         *val = ret.value;
268         return 0;
269 }
270
271 /*
272  * Write PCI config space
273  */
274
275 static int iSeries_pci_write_config(struct pci_bus *bus, unsigned int devfn,
276                 int offset, int size, u32 val)
277 {
278         struct device_node *node = find_device_node(bus->number, devfn);
279         u64 fn;
280         u64 ret;
281
282         if (node == NULL)
283                 return PCIBIOS_DEVICE_NOT_FOUND;
284         if (offset > 255)
285                 return PCIBIOS_BAD_REGISTER_NUMBER;
286
287         fn = hv_cfg_write_func[(size - 1) & 3];
288         ret = HvCall4(fn, iseries_ds_addr(node), offset, val, 0);
289
290         if (ret != 0)
291                 return PCIBIOS_DEVICE_NOT_FOUND;
292
293         return 0;
294 }
295
296 static struct pci_ops iSeries_pci_ops = {
297         .read = iSeries_pci_read_config,
298         .write = iSeries_pci_write_config
299 };
300
301 /*
302  * Check Return Code
303  * -> On Failure, print and log information.
304  *    Increment Retry Count, if exceeds max, panic partition.
305  *
306  * PCI: Device 23.90 ReadL I/O Error( 0): 0x1234
307  * PCI: Device 23.90 ReadL Retry( 1)
308  * PCI: Device 23.90 ReadL Retry Successful(1)
309  */
310 static int check_return_code(char *type, struct device_node *dn,
311                 int *retry, u64 ret)
312 {
313         if (ret != 0)  {
314                 struct pci_dn *pdn = PCI_DN(dn);
315
316                 (*retry)++;
317                 printk("PCI: %s: Device 0x%04X:%02X  I/O Error(%2d): 0x%04X\n",
318                                 type, pdn->busno, pdn->devfn,
319                                 *retry, (int)ret);
320                 /*
321                  * Bump the retry and check for retry count exceeded.
322                  * If, Exceeded, panic the system.
323                  */
324                 if (((*retry) > PCI_RETRY_MAX) &&
325                                 (limit_pci_retries > 0)) {
326                         mf_display_src(0xB6000103);
327                         panic_timeout = 0;
328                         panic("PCI: Hardware I/O Error, SRC B6000103, "
329                                         "Automatic Reboot Disabled.\n");
330                 }
331                 return -1;      /* Retry Try */
332         }
333         return 0;
334 }
335
336 /*
337  * Translate the I/O Address into a device node, bar, and bar offset.
338  * Note: Make sure the passed variable end up on the stack to avoid
339  * the exposure of being device global.
340  */
341 static inline struct device_node *xlate_iomm_address(
342                 const volatile void __iomem *addr,
343                 u64 *dsaptr, u64 *bar_offset)
344 {
345         unsigned long orig_addr;
346         unsigned long base_addr;
347         unsigned long ind;
348         struct device_node *dn;
349
350         orig_addr = (unsigned long __force)addr;
351         if ((orig_addr < BASE_IO_MEMORY) || (orig_addr >= max_io_memory))
352                 return NULL;
353         base_addr = orig_addr - BASE_IO_MEMORY;
354         ind = base_addr / IOMM_TABLE_ENTRY_SIZE;
355         dn = iomm_table[ind];
356
357         if (dn != NULL) {
358                 int barnum = iobar_table[ind];
359                 *dsaptr = iseries_ds_addr(dn) | (barnum << 24);
360                 *bar_offset = base_addr % IOMM_TABLE_ENTRY_SIZE;
361         } else
362                 panic("PCI: Invalid PCI IO address detected!\n");
363         return dn;
364 }
365
366 /*
367  * Read MM I/O Instructions for the iSeries
368  * On MM I/O error, all ones are returned and iSeries_pci_IoError is cal
369  * else, data is returned in Big Endian format.
370  */
371 static u8 iSeries_read_byte(const volatile void __iomem *addr)
372 {
373         u64 bar_offset;
374         u64 dsa;
375         int retry = 0;
376         struct HvCallPci_LoadReturn ret;
377         struct device_node *dn =
378                 xlate_iomm_address(addr, &dsa, &bar_offset);
379
380         if (dn == NULL) {
381                 static unsigned long last_jiffies;
382                 static int num_printed;
383
384                 if ((jiffies - last_jiffies) > 60 * HZ) {
385                         last_jiffies = jiffies;
386                         num_printed = 0;
387                 }
388                 if (num_printed++ < 10)
389                         printk(KERN_ERR "iSeries_read_byte: invalid access at IO address %p\n",
390                                addr);
391                 return 0xff;
392         }
393         do {
394                 HvCall3Ret16(HvCallPciBarLoad8, &ret, dsa, bar_offset, 0);
395         } while (check_return_code("RDB", dn, &retry, ret.rc) != 0);
396
397         return ret.value;
398 }
399
400 static u16 iSeries_read_word(const volatile void __iomem *addr)
401 {
402         u64 bar_offset;
403         u64 dsa;
404         int retry = 0;
405         struct HvCallPci_LoadReturn ret;
406         struct device_node *dn =
407                 xlate_iomm_address(addr, &dsa, &bar_offset);
408
409         if (dn == NULL) {
410                 static unsigned long last_jiffies;
411                 static int num_printed;
412
413                 if ((jiffies - last_jiffies) > 60 * HZ) {
414                         last_jiffies = jiffies;
415                         num_printed = 0;
416                 }
417                 if (num_printed++ < 10)
418                         printk(KERN_ERR "iSeries_read_word: invalid access at IO address %p\n",
419                                addr);
420                 return 0xffff;
421         }
422         do {
423                 HvCall3Ret16(HvCallPciBarLoad16, &ret, dsa,
424                                 bar_offset, 0);
425         } while (check_return_code("RDW", dn, &retry, ret.rc) != 0);
426
427         return ret.value;
428 }
429
430 static u32 iSeries_read_long(const volatile void __iomem *addr)
431 {
432         u64 bar_offset;
433         u64 dsa;
434         int retry = 0;
435         struct HvCallPci_LoadReturn ret;
436         struct device_node *dn =
437                 xlate_iomm_address(addr, &dsa, &bar_offset);
438
439         if (dn == NULL) {
440                 static unsigned long last_jiffies;
441                 static int num_printed;
442
443                 if ((jiffies - last_jiffies) > 60 * HZ) {
444                         last_jiffies = jiffies;
445                         num_printed = 0;
446                 }
447                 if (num_printed++ < 10)
448                         printk(KERN_ERR "iSeries_read_long: invalid access at IO address %p\n",
449                                addr);
450                 return 0xffffffff;
451         }
452         do {
453                 HvCall3Ret16(HvCallPciBarLoad32, &ret, dsa,
454                                 bar_offset, 0);
455         } while (check_return_code("RDL", dn, &retry, ret.rc) != 0);
456
457         return ret.value;
458 }
459
460 /*
461  * Write MM I/O Instructions for the iSeries
462  *
463  */
464 static void iSeries_write_byte(u8 data, volatile void __iomem *addr)
465 {
466         u64 bar_offset;
467         u64 dsa;
468         int retry = 0;
469         u64 rc;
470         struct device_node *dn =
471                 xlate_iomm_address(addr, &dsa, &bar_offset);
472
473         if (dn == NULL) {
474                 static unsigned long last_jiffies;
475                 static int num_printed;
476
477                 if ((jiffies - last_jiffies) > 60 * HZ) {
478                         last_jiffies = jiffies;
479                         num_printed = 0;
480                 }
481                 if (num_printed++ < 10)
482                         printk(KERN_ERR "iSeries_write_byte: invalid access at IO address %p\n", addr);
483                 return;
484         }
485         do {
486                 rc = HvCall4(HvCallPciBarStore8, dsa, bar_offset, data, 0);
487         } while (check_return_code("WWB", dn, &retry, rc) != 0);
488 }
489
490 static void iSeries_write_word(u16 data, volatile void __iomem *addr)
491 {
492         u64 bar_offset;
493         u64 dsa;
494         int retry = 0;
495         u64 rc;
496         struct device_node *dn =
497                 xlate_iomm_address(addr, &dsa, &bar_offset);
498
499         if (dn == NULL) {
500                 static unsigned long last_jiffies;
501                 static int num_printed;
502
503                 if ((jiffies - last_jiffies) > 60 * HZ) {
504                         last_jiffies = jiffies;
505                         num_printed = 0;
506                 }
507                 if (num_printed++ < 10)
508                         printk(KERN_ERR "iSeries_write_word: invalid access at IO address %p\n",
509                                addr);
510                 return;
511         }
512         do {
513                 rc = HvCall4(HvCallPciBarStore16, dsa, bar_offset, data, 0);
514         } while (check_return_code("WWW", dn, &retry, rc) != 0);
515 }
516
517 static void iSeries_write_long(u32 data, volatile void __iomem *addr)
518 {
519         u64 bar_offset;
520         u64 dsa;
521         int retry = 0;
522         u64 rc;
523         struct device_node *dn =
524                 xlate_iomm_address(addr, &dsa, &bar_offset);
525
526         if (dn == NULL) {
527                 static unsigned long last_jiffies;
528                 static int num_printed;
529
530                 if ((jiffies - last_jiffies) > 60 * HZ) {
531                         last_jiffies = jiffies;
532                         num_printed = 0;
533                 }
534                 if (num_printed++ < 10)
535                         printk(KERN_ERR "iSeries_write_long: invalid access at IO address %p\n",
536                                addr);
537                 return;
538         }
539         do {
540                 rc = HvCall4(HvCallPciBarStore32, dsa, bar_offset, data, 0);
541         } while (check_return_code("WWL", dn, &retry, rc) != 0);
542 }
543
544 static u8 iseries_readb(const volatile void __iomem *addr)
545 {
546         return iSeries_read_byte(addr);
547 }
548
549 static u16 iseries_readw(const volatile void __iomem *addr)
550 {
551         return le16_to_cpu(iSeries_read_word(addr));
552 }
553
554 static u32 iseries_readl(const volatile void __iomem *addr)
555 {
556         return le32_to_cpu(iSeries_read_long(addr));
557 }
558
559 static u16 iseries_readw_be(const volatile void __iomem *addr)
560 {
561         return iSeries_read_word(addr);
562 }
563
564 static u32 iseries_readl_be(const volatile void __iomem *addr)
565 {
566         return iSeries_read_long(addr);
567 }
568
569 static void iseries_writeb(u8 data, volatile void __iomem *addr)
570 {
571         iSeries_write_byte(data, addr);
572 }
573
574 static void iseries_writew(u16 data, volatile void __iomem *addr)
575 {
576         iSeries_write_word(cpu_to_le16(data), addr);
577 }
578
579 static void iseries_writel(u32 data, volatile void __iomem *addr)
580 {
581         iSeries_write_long(cpu_to_le32(data), addr);
582 }
583
584 static void iseries_writew_be(u16 data, volatile void __iomem *addr)
585 {
586         iSeries_write_word(data, addr);
587 }
588
589 static void iseries_writel_be(u32 data, volatile void __iomem *addr)
590 {
591         iSeries_write_long(data, addr);
592 }
593
594 static void iseries_readsb(const volatile void __iomem *addr, void *buf,
595                            unsigned long count)
596 {
597         u8 *dst = buf;
598         while(count-- > 0)
599                 *(dst++) = iSeries_read_byte(addr);
600 }
601
602 static void iseries_readsw(const volatile void __iomem *addr, void *buf,
603                            unsigned long count)
604 {
605         u16 *dst = buf;
606         while(count-- > 0)
607                 *(dst++) = iSeries_read_word(addr);
608 }
609
610 static void iseries_readsl(const volatile void __iomem *addr, void *buf,
611                            unsigned long count)
612 {
613         u32 *dst = buf;
614         while(count-- > 0)
615                 *(dst++) = iSeries_read_long(addr);
616 }
617
618 static void iseries_writesb(volatile void __iomem *addr, const void *buf,
619                             unsigned long count)
620 {
621         const u8 *src = buf;
622         while(count-- > 0)
623                 iSeries_write_byte(*(src++), addr);
624 }
625
626 static void iseries_writesw(volatile void __iomem *addr, const void *buf,
627                             unsigned long count)
628 {
629         const u16 *src = buf;
630         while(count-- > 0)
631                 iSeries_write_word(*(src++), addr);
632 }
633
634 static void iseries_writesl(volatile void __iomem *addr, const void *buf,
635                             unsigned long count)
636 {
637         const u32 *src = buf;
638         while(count-- > 0)
639                 iSeries_write_long(*(src++), addr);
640 }
641
642 static void iseries_memset_io(volatile void __iomem *addr, int c,
643                               unsigned long n)
644 {
645         volatile char __iomem *d = addr;
646
647         while (n-- > 0)
648                 iSeries_write_byte(c, d++);
649 }
650
651 static void iseries_memcpy_fromio(void *dest, const volatile void __iomem *src,
652                                   unsigned long n)
653 {
654         char *d = dest;
655         const volatile char __iomem *s = src;
656
657         while (n-- > 0)
658                 *d++ = iSeries_read_byte(s++);
659 }
660
661 static void iseries_memcpy_toio(volatile void __iomem *dest, const void *src,
662                                 unsigned long n)
663 {
664         const char *s = src;
665         volatile char __iomem *d = dest;
666
667         while (n-- > 0)
668                 iSeries_write_byte(*s++, d++);
669 }
670
671 /* We only set MMIO ops. The default PIO ops will be default
672  * to the MMIO ops + pci_io_base which is 0 on iSeries as
673  * expected so both should work.
674  *
675  * Note that we don't implement the readq/writeq versions as
676  * I don't know of an HV call for doing so. Thus, the default
677  * operation will be used instead, which will fault a the value
678  * return by iSeries for MMIO addresses always hits a non mapped
679  * area. This is as good as the BUG() we used to have there.
680  */
681 static struct ppc_pci_io __initdata iseries_pci_io = {
682         .readb = iseries_readb,
683         .readw = iseries_readw,
684         .readl = iseries_readl,
685         .readw_be = iseries_readw_be,
686         .readl_be = iseries_readl_be,
687         .writeb = iseries_writeb,
688         .writew = iseries_writew,
689         .writel = iseries_writel,
690         .writew_be = iseries_writew_be,
691         .writel_be = iseries_writel_be,
692         .readsb = iseries_readsb,
693         .readsw = iseries_readsw,
694         .readsl = iseries_readsl,
695         .writesb = iseries_writesb,
696         .writesw = iseries_writesw,
697         .writesl = iseries_writesl,
698         .memset_io = iseries_memset_io,
699         .memcpy_fromio = iseries_memcpy_fromio,
700         .memcpy_toio = iseries_memcpy_toio,
701 };
702
703 /*
704  * iSeries_pcibios_init
705  *
706  * Description:
707  *   This function checks for all possible system PCI host bridges that connect
708  *   PCI buses.  The system hypervisor is queried as to the guest partition
709  *   ownership status.  A pci_controller is built for any bus which is partially
710  *   owned or fully owned by this guest partition.
711  */
712 void __init iSeries_pcibios_init(void)
713 {
714         struct pci_controller *phb;
715         struct device_node *root = of_find_node_by_path("/");
716         struct device_node *node = NULL;
717
718         /* Install IO hooks */
719         ppc_pci_io = iseries_pci_io;
720
721         /* iSeries has no IO space in the common sense, it needs to set
722          * the IO base to 0
723          */
724         pci_io_base = 0;
725
726         if (root == NULL) {
727                 printk(KERN_CRIT "iSeries_pcibios_init: can't find root "
728                                 "of device tree\n");
729                 return;
730         }
731         while ((node = of_get_next_child(root, node)) != NULL) {
732                 HvBusNumber bus;
733                 const u32 *busp;
734
735                 if ((node->type == NULL) || (strcmp(node->type, "pci") != 0))
736                         continue;
737
738                 busp = of_get_property(node, "bus-range", NULL);
739                 if (busp == NULL)
740                         continue;
741                 bus = *busp;
742                 printk("bus %d appears to exist\n", bus);
743                 phb = pcibios_alloc_controller(node);
744                 if (phb == NULL)
745                         continue;
746
747                 phb->pci_mem_offset = bus;
748                 phb->first_busno = bus;
749                 phb->last_busno = bus;
750                 phb->ops = &iSeries_pci_ops;
751         }
752
753         of_node_put(root);
754
755         pci_devs_phb_init();
756 }
757