arch/powerpc/boot/dts/tqm8540.dts

   1 /*
   2  * TQM 8540 Device Tree Source
   3  *
   4  * Copyright 2008 Freescale Semiconductor Inc.
   5  *
   6  * This program is free software; you can redistribute  it and/or modify it
   7  * under  the terms of  the GNU General  Public License as published by the
   8  * Free Software Foundation;  either version 2 of the  License, or (at your
   9  * option) any later version.
  10  */
  11
  12 /dts-v1/;
  13
  14 / {
  15         model = "tqc,tqm8540";
  16         compatible = "tqc,tqm8540";
  17         #address-cells = <1>;
  18         #size-cells = <1>;
  19
  20         aliases {
  21                 ethernet0 = &enet0;
  22                 ethernet1 = &enet1;
  23                 ethernet2 = &enet2;
  24                 serial0 = &serial0;
  25                 serial1 = &serial1;
  26                 pci0 = &pci0;
  27         };
  28
  29         cpus {
  30                 #address-cells = <1>;
  31                 #size-cells = <0>;
  32
  33                 PowerPC,8540@0 {
  34                         device_type = "cpu";
  35                         reg = <0>;
  36                         d-cache-line-size = <32>;
  37                         i-cache-line-size = <32>;
  38                         d-cache-size = <32768>;
  39                         i-cache-size = <32768>;
  40                         timebase-frequency = <0>;
  41                         bus-frequency = <0>;
  42                         clock-frequency = <0>;
  43                         next-level-cache = <&L2>;
  44                 };
  45         };
  46
  47         memory {
  48                 device_type = "memory";
  49                 reg = <0x00000000 0x10000000>;
  50         };
  51
  52         soc@e0000000 {
  53                 #address-cells = <1>;
  54                 #size-cells = <1>;
  55                 device_type = "soc";
  56                 ranges = <0x0 0xe0000000 0x100000>;
  57                 reg = <0xe0000000 0x200>;
  58                 bus-frequency = <0>;
  59                 compatible = "fsl,mpc8540-immr", "simple-bus";
  60
  61                 memory-controller@2000 {
  62                         compatible = "fsl,8540-memory-controller";
  63                         reg = <0x2000 0x1000>;
  64                         interrupt-parent = <&mpic>;
  65                         interrupts = <18 2>;
  66                 };
  67
  68                 L2: l2-cache-controller@20000 {
  69                         compatible = "fsl,8540-l2-cache-controller";
  70                         reg = <0x20000 0x1000>;
  71                         cache-line-size = <32>;
  72                         cache-size = <0x40000>; // L2, 256K
  73                         interrupt-parent = <&mpic>;
  74                         interrupts = <16 2>;
  75                 };
  76
  77                 i2c@3000 {
  78                         #address-cells = <1>;
  79                         #size-cells = <0>;
  80                         cell-index = <0>;
  81                         compatible = "fsl-i2c";
  82                         reg = <0x3000 0x100>;
  83                         interrupts = <43 2>;
  84                         interrupt-parent = <&mpic>;
  85                         dfsrr;
  86
  87                         rtc@68 {
  88                                 compatible = "dallas,ds1337";
  89                                 reg = <0x68>;
  90                         };
  91                 };
  92
  93                 mdio@24520 {
  94                         #address-cells = <1>;
  95                         #size-cells = <0>;
  96                         compatible = "fsl,gianfar-mdio";
  97                         reg = <0x24520 0x20>;
  98
  99                         phy1: ethernet-phy@1 {
 100                                 interrupt-parent = <&mpic>;
 101                                 interrupts = <8 1>;
 102                                 reg = <1>;
 103                                 device_type = "ethernet-phy";
 104                         };
 105                         phy2: ethernet-phy@2 {
 106                                 interrupt-parent = <&mpic>;
 107                                 interrupts = <8 1>;
 108                                 reg = <2>;
 109                                 device_type = "ethernet-phy";
 110                         };
 111                         phy3: ethernet-phy@3 {
 112                                 interrupt-parent = <&mpic>;
 113                                 interrupts = <8 1>;
 114                                 reg = <3>;
 115                                 device_type = "ethernet-phy";
 116                         };
 117                 };
 118
 119                 enet0: ethernet@24000 {
 120                         cell-index = <0>;
 121                         device_type = "network";
 122                         model = "TSEC";
 123                         compatible = "gianfar";
 124                         reg = <0x24000 0x1000>;
 125                         local-mac-address = [ 00 00 00 00 00 00 ];
 126                         interrupts = <29 2 30 2 34 2>;
 127                         interrupt-parent = <&mpic>;
 128                         phy-handle = <&phy2>;
 129                 };
 130
 131                 enet1: ethernet@25000 {
 132                         cell-index = <1>;
 133                         device_type = "network";
 134                         model = "TSEC";
 135                         compatible = "gianfar";
 136                         reg = <0x25000 0x1000>;
 137                         local-mac-address = [ 00 00 00 00 00 00 ];
 138                         interrupts = <35 2 36 2 40 2>;
 139                         interrupt-parent = <&mpic>;
 140                         phy-handle = <&phy1>;
 141                 };
 142
 143                 enet2: ethernet@26000 {
 144                         cell-index = <2>;
 145                         device_type = "network";
 146                         model = "FEC";
 147                         compatible = "gianfar";
 148                         reg = <0x26000 0x1000>;
 149                         local-mac-address = [ 00 00 00 00 00 00 ];
 150                         interrupts = <41 2>;
 151                         interrupt-parent = <&mpic>;
 152                         phy-handle = <&phy3>;
 153                 };
 154
 155                 serial0: serial@4500 {
 156                         cell-index = <0>;
 157                         device_type = "serial";
 158                         compatible = "ns16550";
 159                         reg = <0x4500 0x100>;   // reg base, size
 160                         clock-frequency = <0>;  // should we fill in in uboot?
 161                         interrupts = <42 2>;
 162                         interrupt-parent = <&mpic>;
 163                 };
 164
 165                 serial1: serial@4600 {
 166                         cell-index = <1>;
 167                         device_type = "serial";
 168                         compatible = "ns16550";
 169                         reg = <0x4600 0x100>;   // reg base, size
 170                         clock-frequency = <0>;  // should we fill in in uboot?
 171                         interrupts = <42 2>;
 172                         interrupt-parent = <&mpic>;
 173                 };
 174
 175                 mpic: pic@40000 {
 176                         interrupt-controller;
 177                         #address-cells = <0>;
 178                         #interrupt-cells = <2>;
 179                         reg = <0x40000 0x40000>;
 180                         device_type = "open-pic";
 181                         compatible = "chrp,open-pic";
 182                 };
 183         };
 184
 185         pci0: pci@e0008000 {
 186                 cell-index = <0>;
 187                 #interrupt-cells = <1>;
 188                 #size-cells = <2>;
 189                 #address-cells = <3>;
 190                 compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
 191                 device_type = "pci";
 192                 reg = <0xe0008000 0x1000>;
 193                 clock-frequency = <66666666>;
 194                 interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 195                 interrupt-map = <
 196                                 /* IDSEL 28 */
 197                                  0xe000 0 0 1 &mpic 2 1
 198                                  0xe000 0 0 2 &mpic 3 1>;
 199
 200                 interrupt-parent = <&mpic>;
 201                 interrupts = <24 2>;
 202                 bus-range = <0 0>;
 203                 ranges = <0x02000000 0 0x80000000 0x80000000 0 0x20000000
 204                           0x01000000 0 0x00000000 0xe2000000 0 0x01000000>;
 205         };
 206 };