2 * TQM5200 board Device Tree Source
4 * Copyright (C) 2007 Semihalf
5 * Marian Balakowicz <m8@semihalf.com>
7 * This program is free software; you can redistribute it and/or modify it
8 * under the terms of the GNU General Public License as published by the
9 * Free Software Foundation; either version 2 of the License, or (at your
10 * option) any later version.
14 * WARNING: Do not depend on this tree layout remaining static just yet.
15 * The MPC5200 device tree conventions are still in flux
16 * Keep an eye on the linuxppc-dev mailing list for more details
20 model = "tqc,tqm5200";
21 compatible = "tqc,tqm5200";
32 d-cache-line-size = <20>;
33 i-cache-line-size = <20>;
34 d-cache-size = <4000>; // L1, 16K
35 i-cache-size = <4000>; // L1, 16K
36 timebase-frequency = <0>; // from bootloader
37 bus-frequency = <0>; // from bootloader
38 clock-frequency = <0>; // from bootloader
43 device_type = "memory";
44 reg = <00000000 04000000>; // 64MB
50 model = "fsl,mpc5200";
51 compatible = "fsl,mpc5200";
52 revision = ""; // from bootloader
54 ranges = <0 f0000000 0000c000>;
55 reg = <f0000000 00000100>;
56 bus-frequency = <0>; // from bootloader
57 system-frequency = <0>; // from bootloader
60 compatible = "mpc5200-cdm";
64 mpc5200_pic: pic@500 {
65 // 5200 interrupts are encoded into two levels;
67 #interrupt-cells = <3>;
68 compatible = "mpc5200-pic";
72 gpt@600 { // General Purpose Timer
73 compatible = "fsl,mpc5200-gpt";
76 interrupt-parent = <&mpc5200_pic>;
81 compatible = "mpc5200-gpio";
84 interrupt-parent = <&mpc5200_pic>;
88 compatible = "mpc5200-ohci","ohci-be";
91 interrupt-parent = <&mpc5200_pic>;
95 compatible = "mpc5200-bestcomm";
97 interrupts = <3 0 0 3 1 0 3 2 0 3 3 0
98 3 4 0 3 5 0 3 6 0 3 7 0
99 3 8 0 3 9 0 3 a 0 3 b 0
100 3 c 0 3 d 0 3 e 0 3 f 0>;
101 interrupt-parent = <&mpc5200_pic>;
105 compatible = "mpc5200-xlb";
109 serial@2000 { // PSC1
110 device_type = "serial";
111 compatible = "mpc5200-psc-uart";
112 port-number = <0>; // Logical port assignment
114 interrupts = <2 1 0>;
115 interrupt-parent = <&mpc5200_pic>;
118 serial@2200 { // PSC2
119 device_type = "serial";
120 compatible = "mpc5200-psc-uart";
121 port-number = <1>; // Logical port assignment
123 interrupts = <2 2 0>;
124 interrupt-parent = <&mpc5200_pic>;
127 serial@2400 { // PSC3
128 device_type = "serial";
129 compatible = "mpc5200-psc-uart";
130 port-number = <2>; // Logical port assignment
132 interrupts = <2 3 0>;
133 interrupt-parent = <&mpc5200_pic>;
137 device_type = "network";
138 compatible = "mpc5200-fec";
140 local-mac-address = [ 00 00 00 00 00 00 ]; /* Filled in by U-Boot */
141 interrupts = <2 5 0>;
142 interrupt-parent = <&mpc5200_pic>;
146 compatible = "mpc5200-ata";
148 interrupts = <2 7 0>;
149 interrupt-parent = <&mpc5200_pic>;
153 compatible = "mpc5200-i2c","fsl-i2c";
155 interrupts = <2 10 0>;
156 interrupt-parent = <&mpc5200_pic>;
161 compatible = "mpc5200-sram";
167 #interrupt-cells = <1>;
169 #address-cells = <3>;
171 compatible = "fsl,mpc5200-pci";
172 reg = <f0000d00 100>;
173 interrupt-map-mask = <f800 0 0 7>;
174 interrupt-map = <c000 0 0 1 &mpc5200_pic 0 0 3
175 c000 0 0 2 &mpc5200_pic 0 0 3
176 c000 0 0 3 &mpc5200_pic 0 0 3
177 c000 0 0 4 &mpc5200_pic 0 0 3>;
178 clock-frequency = <0>; // From boot loader
179 interrupts = <2 8 0 2 9 0 2 a 0>;
180 interrupt-parent = <&mpc5200_pic>;
182 ranges = <42000000 0 80000000 80000000 0 10000000
183 02000000 0 90000000 90000000 0 10000000
184 01000000 0 00000000 a0000000 0 01000000>;